[PATCH] callout removal: esp

callout removal: esp

drivers/char/esp.c

@@ -109,12 +109,11 @@ static char serial_version[] __initdata = "2.2";
 
 static DECLARE_TASK_QUEUE(tq_esp);
 
-static struct tty_driver esp_driver, esp_callout_driver;
+static struct tty_driver esp_driver;
 static int serial_refcount;
 
 /* serial subtype definitions */
 #define SERIAL_TYPE_NORMAL	1
-#define SERIAL_TYPE_CALLOUT	2
 
 /*
  * Serial driver configuration section.  Here are the various options:
@@ -638,8 +637,7 @@ static _INLINE_ void check_modem_status(struct esp_struct *info)
 #endif		
 		if (status & UART_MSR_DCD)
 			wake_up_interruptible(&info->open_wait);
-		else if (!((info->flags & ASYNC_CALLOUT_ACTIVE) &&
-			   (info->flags & ASYNC_CALLOUT_NOHUP))) {
+		else {
 #ifdef SERIAL_DEBUG_OPEN
 			printk("scheduling hangup...");
 #endif
@@ -2077,8 +2075,6 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 	 */
 	if (info->flags & ASYNC_NORMAL_ACTIVE)
 		info->normal_termios = *tty->termios;
-	if (info->flags & ASYNC_CALLOUT_ACTIVE)
-		info->callout_termios = *tty->termios;
 	/*
 	 * Now we wait for the transmit buffer to clear; and we notify 
 	 * the line discipline to only process XON/XOFF characters.
@@ -2126,8 +2122,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 		}
 		wake_up_interruptible(&info->open_wait);
 	}
-	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE|
-			 ASYNC_CLOSING);
+	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
 	wake_up_interruptible(&info->close_wait);
 out:
 	restore_flags(flags);
@@ -2185,7 +2180,7 @@ static void esp_hangup(struct tty_struct *tty)
 	shutdown(info);
 	info->event = 0;
 	info->count = 0;
-	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE);
+	info->flags &= ~ASYNC_NORMAL_ACTIVE;
 	info->tty = 0;
 	wake_up_interruptible(&info->open_wait);
 }
@@ -2221,44 +2216,18 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 #endif
 	}
 
-	/*
-	 * If this is a callout device, then just make sure the normal
-	 * device isn't being used.
-	 */
-	if (tty->driver->subtype == SERIAL_TYPE_CALLOUT) {
-		if (info->flags & ASYNC_NORMAL_ACTIVE)
-			return -EBUSY;
-		if ((info->flags & ASYNC_CALLOUT_ACTIVE) &&
-		    (info->flags & ASYNC_SESSION_LOCKOUT) &&
-		    (info->session != current->session))
-		    return -EBUSY;
-		if ((info->flags & ASYNC_CALLOUT_ACTIVE) &&
-		    (info->flags & ASYNC_PGRP_LOCKOUT) &&
-		    (info->pgrp != current->pgrp))
-		    return -EBUSY;
-		info->flags |= ASYNC_CALLOUT_ACTIVE;
-		return 0;
-	}
-	
 	/*
 	 * If non-blocking mode is set, or the port is not enabled,
 	 * then make the check up front and then exit.
 	 */
 	if ((filp->f_flags & O_NONBLOCK) ||
 	    (tty->flags & (1 << TTY_IO_ERROR))) {
-		if (info->flags & ASYNC_CALLOUT_ACTIVE)
-			return -EBUSY;
 		info->flags |= ASYNC_NORMAL_ACTIVE;
 		return 0;
 	}
 
-	if (info->flags & ASYNC_CALLOUT_ACTIVE) {
-		if (info->normal_termios.c_cflag & CLOCAL)
-			do_clocal = 1;
-	} else {
 	if (tty->termios->c_cflag & CLOCAL)
 		do_clocal = 1;
-	}
 
 	/*
 	 * Block waiting for the carrier detect and the line to become
@@ -2282,8 +2251,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 	while (1) {
 		save_flags(flags);
 		cli();
-		if (!(info->flags & ASYNC_CALLOUT_ACTIVE) &&
-			(tty->termios->c_cflag & CBAUD)) {
+		if ((tty->termios->c_cflag & CBAUD)) {
 			unsigned int scratch;
 
 			serial_out(info, UART_ESI_CMD1, ESI_READ_UART);
@@ -2313,8 +2281,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 		if (serial_in(info, UART_ESI_STAT2) & UART_MSR_DCD)
 			do_clocal = 1;
 
-		if (!(info->flags & ASYNC_CALLOUT_ACTIVE) &&
-		    !(info->flags & ASYNC_CLOSING) &&
+		if (!(info->flags & ASYNC_CLOSING) &&
 		    (do_clocal))
 			break;
 		if (signal_pending(current)) {
@@ -2399,16 +2366,10 @@ static int esp_open(struct tty_struct *tty, struct file * filp)
 	}
 
 	if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) {
-		if (tty->driver->subtype == SERIAL_TYPE_NORMAL)
 		*tty->termios = info->normal_termios;
-		else 
-			*tty->termios = info->callout_termios;
 		change_speed(info);
 	}
 
-	info->session = current->session;
-	info->pgrp = current->pgrp;
-
 #ifdef SERIAL_DEBUG_OPEN
 	printk("esp_open %s successful...", tty->name);
 #endif
@@ -2581,35 +2542,18 @@ int __init espserial_init(void)
 	esp_driver.break_ctl = esp_break;
 	esp_driver.wait_until_sent = rs_wait_until_sent;
 
-	/*
-	 * The callout device is just like normal device except for
-	 * major number and the subtype code.
-	 */
-	esp_callout_driver = esp_driver;
-	esp_callout_driver.name = "cup";
-	esp_callout_driver.major = ESP_OUT_MAJOR;
-	esp_callout_driver.subtype = SERIAL_TYPE_CALLOUT;
-
 	if (tty_register_driver(&esp_driver))
 	{
 		printk(KERN_ERR "Couldn't register esp serial driver");
 		return 1;
 	}
 
-	if (tty_register_driver(&esp_callout_driver))
-	{
-		printk(KERN_ERR "Couldn't register esp callout driver");
-		tty_unregister_driver(&esp_driver);
-		return 1;
-	}
-	
 	info = kmalloc(sizeof(struct esp_struct), GFP_KERNEL);
 
 	if (!info)
 	{
 		printk(KERN_ERR "Couldn't allocate memory for esp serial device information\n");
 		tty_unregister_driver(&esp_driver);
-		tty_unregister_driver(&esp_callout_driver);
 		return 1;
 	}
 
@@ -2643,7 +2587,6 @@ int __init espserial_init(void)
 		info->tqueue.data = info;
 		info->tqueue_hangup.routine = do_serial_hangup;
 		info->tqueue_hangup.data = info;
-		info->callout_termios = esp_callout_driver.init_termios;
 		info->normal_termios = esp_driver.init_termios;
 		info->config.rx_timeout = rx_timeout;
 		info->config.flow_on = flow_on;
@@ -2717,9 +2660,6 @@ static void __exit espserial_exit(void)
 	if ((e1 = tty_unregister_driver(&esp_driver)))
 		printk("SERIAL: failed to unregister serial driver (%d)\n",
 		       e1);
-	if ((e2 = tty_unregister_driver(&esp_callout_driver)))
-		printk("SERIAL: failed to unregister callout driver (%d)\n", 
-		       e2);
 	restore_flags(flags);
 
 	while (ports) {

include/linux/hayesesp.h

@@ -96,8 +96,6 @@ struct esp_struct {
 	int			line;
 	int			count;	    /* # of fd on device */
 	int			blocked_open; /* # of blocked opens */
-	long			session; /* Session of opening process */
-	long			pgrp; /* pgrp of opening process */
 	unsigned char 		*xmit_buf;
 	int			xmit_head;
 	int			xmit_tail;
@@ -105,7 +103,6 @@ struct esp_struct {
 	struct work_struct	tqueue;
 	struct work_struct	tqueue_hangup;
 	struct termios		normal_termios;
-	struct termios		callout_termios;
 	wait_queue_head_t	open_wait;
 	wait_queue_head_t	close_wait;
 	wait_queue_head_t	delta_msr_wait;