Skip to content

L
linux
Commit e5963e15 authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

Merge tag 'zynqmp-dt-for-6.6' of https://github.com/Xilinx/linux-xlnx into soc/dt 

arm64: ZynqMP DT changes for v6.6

- Describe caches
- Fix i2c gpio recovery description
- Setting up default i2c frequency
- Describe GEM TSU clock and assigned rates for SOMs
- Reserved 1MB for internal firmware usage
- Fix dwc3 IRQ description
- Describe interrupts by using macros

* tag 'zynqmp-dt-for-6.6' of https://github.com/Xilinx/linux-xlnx:
  arm64: zynqmp: Describe interrupts by using macros
  arm64: zynqmp: Fix dwc3 usb interrupt description
  arm64: zynqmp: Add memory reserved node for k26 Kria SOM board
  arm64: zynqmp: Assign TSU clock frequency for GEMs
  arm64: zynqmp: Setting default i2c clock frequency to 400kHz
  arm64: zynqmp: Fix open drain warning on ZynqMP
  arm64: zynqmp: Add L2 cache nodes

Link: https://lore.kernel.org/r/fde6d7b4-c751-219d-3ec5-04e5bad2aa17@monstr.euSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents bda81ccc cf0e27cd
Hide whitespace changes
Inline Side-by-side
Showing with 173 additions and 109 deletions
arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
View file @ e5963e15
......@@ -146,24 +146,28 @@ &gem0 {
clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>,
<&zynqmp_clk GEM0_TX>, <&zynqmp_clk GEM0_RX>,
<&zynqmp_clk GEM_TSU>;
assigned-clocks = <&zynqmp_clk GEM_TSU>;
};
&gem1 {
clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>,
<&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>,
<&zynqmp_clk GEM_TSU>;
assigned-clocks = <&zynqmp_clk GEM_TSU>;
};
&gem2 {
clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM2_REF>,
<&zynqmp_clk GEM2_TX>, <&zynqmp_clk GEM2_RX>,
<&zynqmp_clk GEM_TSU>;
assigned-clocks = <&zynqmp_clk GEM_TSU>;
};
&gem3 {
clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM3_REF>,
<&zynqmp_clk GEM3_TX>, <&zynqmp_clk GEM3_RX>,
<&zynqmp_clk GEM_TSU>;
assigned-clocks = <&zynqmp_clk GEM_TSU>;
};
&gpio {
......
arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
View file @ e5963e15
......@@ -27,8 +27,8 @@ &i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
/* u14 - 0x40 - ina260 */
/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
......@@ -145,6 +145,7 @@ &gem3 { /* required by spec */
pinctrl-0 = <&pinctrl_gem3_default>;
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
assigned-clock-rates = <250000000>;
mdio: mdio {
#address-cells = <1>;
......
arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
View file @ e5963e15
......@@ -22,8 +22,8 @@ &i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
/* u14 - 0x40 - ina260 */
/* u43 - 0x2d - usb5744 */
......@@ -128,6 +128,7 @@ &gem3 { /* required by spec */
pinctrl-0 = <&pinctrl_gem3_default>;
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
assigned-clock-rates = <250000000>;
mdio: mdio {
#address-cells = <1>;
......
arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
View file @ e5963e15
......@@ -50,6 +50,17 @@ memory@0 {
reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
pmu_region: pmu@7ff00000 {
reg = <0x0 0x7ff00000 0x0 0x100000>;
no-map;
};
};
gpio-keys {
compatible = "gpio-keys";
autorepeat;
......@@ -245,8 +256,8 @@ &i2c1 {
status = "okay";
bootph-all;
clock-frequency = <400000>;
scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
eeprom: eeprom@50 { /* u46 - also at address 0x58 */
bootph-all;
......
arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
View file @ e5963e15
......@@ -119,8 +119,8 @@ &i2c1 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
scl-gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpio 36 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio 37 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
eeprom: eeprom@55 {
compatible = "atmel,24c64"; /* 24AA64 */
......
arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
View file @ e5963e15
......@@ -110,8 +110,8 @@ &i2c0 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0_default>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
scl-gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpio 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
tca6416_u26: gpio@20 {
compatible = "ti,tca6416";
......
arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
View file @ e5963e15
......@@ -91,8 +91,8 @@ &i2c0 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0_default>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
scl-gpios = <&gpio 74 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio 75 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpio 74 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio 75 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
&i2c1 {
......@@ -100,8 +100,8 @@ &i2c1 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
scl-gpios = <&gpio 76 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio 77 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpio 76 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio 77 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
......
arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
View file @ e5963e15
......@@ -180,8 +180,8 @@ &i2c1 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
scl-gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpio 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
clock-frequency = <100000>;
i2c-mux@75 { /* u11 */
compatible = "nxp,pca9548";
......
arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
View file @ e5963e15
......@@ -233,8 +233,8 @@ &i2c0 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0_default>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
tca6416_u97: gpio@20 {
compatible = "ti,tca6416";
......@@ -497,8 +497,8 @@ &i2c1 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
/* PL i2c via PCA9306 - u45 */
i2c-mux@74 { /* u34 */
......
arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
View file @ e5963e15
......@@ -140,8 +140,8 @@ &i2c1 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
/* Another connection to this bus via PL i2c via PCA9306 - u45 */
i2c-mux@74 { /* u34 */
......
arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
View file @ e5963e15
......@@ -145,8 +145,8 @@ &i2c1 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
tca6416_u97: gpio@20 {
compatible = "ti,tca6416";
......
arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
View file @ e5963e15
......@@ -245,8 +245,8 @@ &i2c0 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0_default>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
tca6416_u97: gpio@20 {
compatible = "ti,tca6416";
......@@ -508,8 +508,8 @@ &i2c1 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
/* PL i2c via PCA9306 - u45 */
i2c-mux@74 { /* u34 */
......
arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
View file @ e5963e15
......@@ -205,8 +205,8 @@ &i2c0 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0_default>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
tca6416_u22: gpio@20 {
compatible = "ti,tca6416";
......@@ -385,8 +385,8 @@ &i2c1 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-mux@74 { /* u26 */
compatible = "nxp,pca9548";
......
arch/arm64/boot/dts/xilinx/zynqmp.dtsi
View file @ e5963e15
......@@ -14,6 +14,8 @@
#include <dt-bindings/dma/xlnx-zynqmp-dpdma.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/power/xlnx-zynqmp-power.h>
#include <dt-bindings/reset/xlnx-zynqmp-resets.h>
......@@ -33,6 +35,7 @@ cpu0: cpu@0 {
operating-points-v2 = <&cpu_opp_table>;
reg = <0x0>;
cpu-idle-states = <&CPU_SLEEP_0>;
next-level-cache = <&L2>;
};
cpu1: cpu@1 {
......@@ -42,6 +45,7 @@ cpu1: cpu@1 {
reg = <0x1>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP_0>;
next-level-cache = <&L2>;
};
cpu2: cpu@2 {
......@@ -51,6 +55,7 @@ cpu2: cpu@2 {
reg = <0x2>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP_0>;
next-level-cache = <&L2>;
};
cpu3: cpu@3 {
......@@ -60,6 +65,13 @@ cpu3: cpu@3 {
reg = <0x3>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP_0>;
next-level-cache = <&L2>;
};
L2: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
};
idle-states {
......@@ -121,7 +133,7 @@ zynqmp_ipi: zynqmp_ipi {
bootph-all;
compatible = "xlnx,zynqmp-ipi-mailbox";
interrupt-parent = <&gic>;
interrupts = <0 35 4>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
xlnx,ipi-id = <0>;
#address-cells = <2>;
#size-cells = <2>;
......@@ -151,10 +163,10 @@ dcc: dcc {
pmu {
compatible = "arm,armv8-pmuv3";
interrupt-parent = <&gic>;
interrupts = <0 143 4>,
<0 144 4>,
<0 145 4>,
<0 146 4>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>,
<&cpu1>,
<&cpu2>,
......@@ -177,7 +189,7 @@ zynqmp_power: zynqmp-power {
bootph-all;
compatible = "xlnx,zynqmp-power";
interrupt-parent = <&gic>;
interrupts = <0 35 4>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
mboxes = <&ipi_mailbox_pmu1 0>, <&ipi_mailbox_pmu1 1>;
mbox-names = "tx", "rx";
};
......@@ -221,10 +233,10 @@ modepin_gpio: gpio {
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
interrupts = <1 13 0xf08>,
<1 14 0xf08>,
<1 11 0xf08>,
<1 10 0xf08>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
fpga_full: fpga-full {
......@@ -264,7 +276,7 @@ can0: can@ff060000 {
status = "disabled";
clock-names = "can_clk", "pclk";
reg = <0x0 0xff060000 0x0 0x1000>;
interrupts = <0 23 4>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
rx-fifo-depth = <0x40>;
......@@ -276,7 +288,7 @@ can1: can@ff070000 {
status = "disabled";
clock-names = "can_clk", "pclk";
reg = <0x0 0xff070000 0x0 0x1000>;
interrupts = <0 24 4>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
rx-fifo-depth = <0x40>;
......@@ -295,11 +307,11 @@ pmu@9000 {
compatible = "arm,cci-400-pmu,r1";
reg = <0x9000 0x5000>;
interrupt-parent = <&gic>;
interrupts = <0 123 4>,
<0 123 4>,
<0 123 4>,
<0 123 4>,
<0 123 4>;
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
};
};
......@@ -309,7 +321,7 @@ fpd_dma_chan1: dma-controller@fd500000 {
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xfd500000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 124 4>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <128>;
......@@ -322,7 +334,7 @@ fpd_dma_chan2: dma-controller@fd510000 {
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xfd510000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 125 4>;
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <128>;
......@@ -335,7 +347,7 @@ fpd_dma_chan3: dma-controller@fd520000 {
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xfd520000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 126 4>;
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <128>;
......@@ -348,7 +360,7 @@ fpd_dma_chan4: dma-controller@fd530000 {
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xfd530000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 127 4>;
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <128>;
......@@ -361,7 +373,7 @@ fpd_dma_chan5: dma-controller@fd540000 {
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xfd540000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 128 4>;
interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <128>;
......@@ -374,7 +386,7 @@ fpd_dma_chan6: dma-controller@fd550000 {
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xfd550000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 129 4>;
interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <128>;
......@@ -387,7 +399,7 @@ fpd_dma_chan7: dma-controller@fd560000 {
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xfd560000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 130 4>;
interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <128>;
......@@ -400,7 +412,7 @@ fpd_dma_chan8: dma-controller@fd570000 {
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xfd570000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 131 4>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <128>;
......@@ -417,7 +429,7 @@ gic: interrupt-controller@f9010000 {
<0x0 0xf9060000 0x0 0x20000>;
interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <1 9 0xf04>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
gpu: gpu@fd4b0000 {
......@@ -425,8 +437,12 @@ gpu: gpu@fd4b0000 {
compatible = "xlnx,zynqmp-mali", "arm,mali-400";
reg = <0x0 0xfd4b0000 0x0 0x10000>;
interrupt-parent = <&gic>;
interrupts = <0 132 4>, <0 132 4>, <0 132 4>,
<0 132 4>, <0 132 4>, <0 132 4>;
interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1", "ppmmu1";
clock-names = "bus", "core";
power-domains = <&zynqmp_firmware PD_GPU>;
......@@ -441,7 +457,7 @@ lpd_dma_chan1: dma-controller@ffa80000 {
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xffa80000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 77 4>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <64>;
......@@ -454,7 +470,7 @@ lpd_dma_chan2: dma-controller@ffa90000 {
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xffa90000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 78 4>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <64>;
......@@ -467,7 +483,7 @@ lpd_dma_chan3: dma-controller@ffaa0000 {
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xffaa0000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 79 4>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <64>;
......@@ -480,7 +496,7 @@ lpd_dma_chan4: dma-controller@ffab0000 {
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xffab0000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 80 4>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <64>;
......@@ -493,7 +509,7 @@ lpd_dma_chan5: dma-controller@ffac0000 {
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xffac0000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 81 4>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <64>;
......@@ -506,7 +522,7 @@ lpd_dma_chan6: dma-controller@ffad0000 {
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xffad0000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 82 4>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <64>;
......@@ -519,7 +535,7 @@ lpd_dma_chan7: dma-controller@ffae0000 {
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xffae0000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 83 4>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <64>;
......@@ -532,7 +548,7 @@ lpd_dma_chan8: dma-controller@ffaf0000 {
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xffaf0000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 84 4>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <64>;
......@@ -544,7 +560,7 @@ mc: memory-controller@fd070000 {
compatible = "xlnx,zynqmp-ddrc-2.40a";
reg = <0x0 0xfd070000 0x0 0x30000>;
interrupt-parent = <&gic>;
interrupts = <0 112 4>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
};
nand0: nand-controller@ff100000 {
......@@ -553,7 +569,7 @@ nand0: nand-controller@ff100000 {
reg = <0x0 0xff100000 0x0 0x1000>;
clock-names = "controller", "bus";
interrupt-parent = <&gic>;
interrupts = <0 14 4>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
iommus = <&smmu 0x872>;
......@@ -564,7 +580,8 @@ gem0: ethernet@ff0b0000 {
compatible = "xlnx,zynqmp-gem", "cdns,gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 57 4>, <0 57 4>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff0b0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
#address-cells = <1>;
......@@ -579,7 +596,8 @@ gem1: ethernet@ff0c0000 {
compatible = "xlnx,zynqmp-gem", "cdns,gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 59 4>, <0 59 4>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff0c0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
#address-cells = <1>;
......@@ -594,7 +612,8 @@ gem2: ethernet@ff0d0000 {
compatible = "xlnx,zynqmp-gem", "cdns,gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 61 4>, <0 61 4>;
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff0d0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
#address-cells = <1>;
......@@ -609,7 +628,8 @@ gem3: ethernet@ff0e0000 {
compatible = "xlnx,zynqmp-gem", "cdns,gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 63 4>, <0 63 4>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff0e0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
#address-cells = <1>;
......@@ -626,7 +646,7 @@ gpio: gpio@ff0a0000 {
#gpio-cells = <0x2>;
gpio-controller;
interrupt-parent = <&gic>;
interrupts = <0 16 4>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0xff0a0000 0x0 0x1000>;
......@@ -637,7 +657,8 @@ i2c0: i2c@ff020000 {
compatible = "cdns,i2c-r1p14";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 17 4>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <400000>;
reg = <0x0 0xff020000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
......@@ -648,7 +669,8 @@ i2c1: i2c@ff030000 {
compatible = "cdns,i2c-r1p14";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 18 4>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <400000>;
reg = <0x0 0xff030000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
......@@ -664,11 +686,11 @@ pcie: pcie@fd0e0000 {
msi-controller;
device_type = "pci";
interrupt-parent = <&gic>;
interrupts = <0 118 4>,
<0 117 4>,
<0 116 4>,
<0 115 4>, /* MSI_1 [63...32] */
<0 114 4>; /* MSI_0 [31...0] */
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, /* MSI_1 [63...32] */
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; /* MSI_0 [31...0] */
interrupt-names = "misc", "dummy", "intx",
"msi1", "msi0";
msi-parent = <&pcie>;
......@@ -698,7 +720,7 @@ qspi: spi@ff0f0000 {
compatible = "xlnx,zynqmp-qspi-1.0";
status = "disabled";
clock-names = "ref_clk", "pclk";
interrupts = <0 15 4>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
num-cs = <1>;
reg = <0x0 0xff0f0000 0x0 0x1000>,
......@@ -723,7 +745,8 @@ rtc: rtc@ffa60000 {
status = "disabled";
reg = <0x0 0xffa60000 0x0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 26 4>, <0 27 4>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "alarm", "sec";
calibration = <0x7FFF>;
};
......@@ -733,7 +756,7 @@ sata: ahci@fd0c0000 {
status = "disabled";
reg = <0x0 0xfd0c0000 0x0 0x2000>;
interrupt-parent = <&gic>;
interrupts = <0 133 4>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&zynqmp_firmware PD_SATA>;
resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
iommus = <&smmu 0x4c0>, <&smmu 0x4c1>,
......@@ -745,7 +768,7 @@ sdhci0: mmc@ff160000 {
compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 48 4>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff160000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
iommus = <&smmu 0x870>;
......@@ -760,7 +783,7 @@ sdhci1: mmc@ff170000 {
compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 49 4>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff170000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
iommus = <&smmu 0x871>;
......@@ -777,18 +800,30 @@ smmu: iommu@fd800000 {
status = "disabled";
#global-interrupts = <1>;
interrupt-parent = <&gic>;
interrupts = <0 155 4>,
<0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
<0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
<0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
<0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
};
spi0: spi@ff040000 {
compatible = "cdns,spi-r1p6";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 19 4>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff040000 0x0 0x1000>;
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
......@@ -800,7 +835,7 @@ spi1: spi@ff050000 {
compatible = "cdns,spi-r1p6";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 20 4>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff050000 0x0 0x1000>;
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
......@@ -812,7 +847,9 @@ ttc0: timer@ff110000 {
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff110000 0x0 0x1000>;
timer-width = <32>;
power-domains = <&zynqmp_firmware PD_TTC_0>;
......@@ -822,7 +859,9 @@ ttc1: timer@ff120000 {
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff120000 0x0 0x1000>;
timer-width = <32>;
power-domains = <&zynqmp_firmware PD_TTC_1>;
......@@ -832,7 +871,9 @@ ttc2: timer@ff130000 {
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff130000 0x0 0x1000>;
timer-width = <32>;
power-domains = <&zynqmp_firmware PD_TTC_2>;
......@@ -842,7 +883,9 @@ ttc3: timer@ff140000 {
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff140000 0x0 0x1000>;
timer-width = <32>;
power-domains = <&zynqmp_firmware PD_TTC_3>;
......@@ -853,7 +896,7 @@ uart0: serial@ff000000 {
compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 21 4>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff000000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
power-domains = <&zynqmp_firmware PD_UART_0>;
......@@ -864,7 +907,7 @@ uart1: serial@ff010000 {
compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 22 4>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff010000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
power-domains = <&zynqmp_firmware PD_UART_1>;
......@@ -888,8 +931,10 @@ dwc3_0: usb@fe200000 {
compatible = "snps,dwc3";
reg = <0x0 0xfe200000 0x0 0x40000>;
interrupt-parent = <&gic>;
interrupt-names = "dwc_usb3", "otg";
interrupts = <0 65 4>, <0 69 4>;
interrupt-names = "host", "peripheral", "otg";
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "bus_early", "ref";
iommus = <&smmu 0x860>;
snps,quirk-frame-length-adjustment = <0x20>;
......@@ -915,8 +960,10 @@ dwc3_1: usb@fe300000 {
compatible = "snps,dwc3";
reg = <0x0 0xfe300000 0x0 0x40000>;
interrupt-parent = <&gic>;
interrupt-names = "dwc_usb3", "otg";
interrupts = <0 70 4>, <0 74 4>;
interrupt-names = "host", "peripheral", "otg";
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "bus_early", "ref";
iommus = <&smmu 0x861>;
snps,quirk-frame-length-adjustment = <0x20>;
......@@ -929,7 +976,7 @@ watchdog0: watchdog@fd4d0000 {
compatible = "cdns,wdt-r1p2";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 113 1>;
interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
reg = <0x0 0xfd4d0000 0x0 0x1000>;
timeout-sec = <60>;
reset-on-timeout;
......@@ -939,7 +986,7 @@ lpd_watchdog: watchdog@ff150000 {
compatible = "cdns,wdt-r1p2";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 52 1>;
interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
reg = <0x0 0xff150000 0x0 0x1000>;
timeout-sec = <10>;
};
......@@ -948,7 +995,7 @@ xilinx_ams: ams@ffa50000 {
compatible = "xlnx,zynqmp-ams";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 56 4>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xffa50000 0x0 0x800>;
#address-cells = <1>;
#size-cells = <1>;
......@@ -974,7 +1021,7 @@ zynqmp_dpdma: dma-controller@fd4c0000 {
compatible = "xlnx,zynqmp-dpdma";
status = "disabled";
reg = <0x0 0xfd4c0000 0x0 0x1000>;
interrupts = <0 122 4>;
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clock-names = "axi_clk";
power-domains = <&zynqmp_firmware PD_DP>;
......@@ -990,7 +1037,7 @@ zynqmp_dpsub: display@fd4a0000 {
<0x0 0xfd4ab000 0x0 0x1000>,
<0x0 0xfd4ac000 0x0 0x1000>;
reg-names = "dp", "blend", "av_buf", "aud";
interrupts = <0 119 4>;
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clock-names = "dp_apb_clk", "dp_aud_clk",
"dp_vtc_pixel_clk_in";
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7