[POWERPC] Separate IRQ config / register set from main header

There is no need to expose these settings outside the scope
of the interrupt controller code itself.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>

arch/powerpc/platforms/52xx/mpc52xx_pic.c

@@ -33,6 +33,7 @@
 #include <asm/irq.h>
 #include <asm/prom.h>
 #include <asm/mpc52xx.h>
+#include "mpc52xx_pic.h"
 
 /*
  *

arch/powerpc/platforms/52xx/mpc52xx_pic.h

+/*
+ * Header file for Freescale MPC52xx Interrupt controller
+ *
+ * Copyright (C) 2004-2005 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003 MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __POWERPC_SYSDEV_MPC52xx_PIC_H__
+#define __POWERPC_SYSDEV_MPC52xx_PIC_H__
+
+#include <asm/types.h>
+
+
+/* HW IRQ mapping */
+#define MPC52xx_IRQ_L1_CRIT	(0)
+#define MPC52xx_IRQ_L1_MAIN	(1)
+#define MPC52xx_IRQ_L1_PERP	(2)
+#define MPC52xx_IRQ_L1_SDMA	(3)
+
+#define MPC52xx_IRQ_L1_OFFSET   (6)
+#define MPC52xx_IRQ_L1_MASK     (0x00c0)
+
+#define MPC52xx_IRQ_L2_OFFSET   (0)
+#define MPC52xx_IRQ_L2_MASK     (0x003f)
+
+#define MPC52xx_IRQ_HIGHTESTHWIRQ (0xd0)
+
+
+/* Interrupt controller Register set */
+struct mpc52xx_intr {
+	u32 per_mask;		/* INTR + 0x00 */
+	u32 per_pri1;		/* INTR + 0x04 */
+	u32 per_pri2;		/* INTR + 0x08 */
+	u32 per_pri3;		/* INTR + 0x0c */
+	u32 ctrl;		/* INTR + 0x10 */
+	u32 main_mask;		/* INTR + 0x14 */
+	u32 main_pri1;		/* INTR + 0x18 */
+	u32 main_pri2;		/* INTR + 0x1c */
+	u32 reserved1;		/* INTR + 0x20 */
+	u32 enc_status;		/* INTR + 0x24 */
+	u32 crit_status;	/* INTR + 0x28 */
+	u32 main_status;	/* INTR + 0x2c */
+	u32 per_status;		/* INTR + 0x30 */
+	u32 reserved2;		/* INTR + 0x34 */
+	u32 per_error;		/* INTR + 0x38 */
+};
+
+#endif /* __POWERPC_SYSDEV_MPC52xx_PIC_H__ */
+

include/asm-powerpc/mpc52xx.h

@@ -19,49 +19,12 @@
 #endif /* __ASSEMBLY__ */
 
 
-/* ======================================================================== */
-/* HW IRQ mapping                                                           */
-/* ======================================================================== */
-
-#define MPC52xx_IRQ_L1_CRIT		(0)
-#define MPC52xx_IRQ_L1_MAIN		(1)
-#define MPC52xx_IRQ_L1_PERP		(2)
-#define MPC52xx_IRQ_L1_SDMA		(3)
-
-#define MPC52xx_IRQ_L1_OFFSET		(6)
-#define MPC52xx_IRQ_L1_MASK		(0xc0)
-
-#define MPC52xx_IRQ_L2_OFFSET		(0)
-#define MPC52xx_IRQ_L2_MASK		(0x3f)
-
-#define MPC52xx_IRQ_HIGHTESTHWIRQ	(0xd0)
-
-
 /* ======================================================================== */
 /* Structures mapping of some unit register set                             */
 /* ======================================================================== */
 
 #ifndef __ASSEMBLY__
 
-/* Interrupt controller Register set */
-struct mpc52xx_intr {
-	u32 per_mask;		/* INTR + 0x00 */
-	u32 per_pri1;		/* INTR + 0x04 */
-	u32 per_pri2;		/* INTR + 0x08 */
-	u32 per_pri3;		/* INTR + 0x0c */
-	u32 ctrl;		/* INTR + 0x10 */
-	u32 main_mask;		/* INTR + 0x14 */
-	u32 main_pri1;		/* INTR + 0x18 */
-	u32 main_pri2;		/* INTR + 0x1c */
-	u32 reserved1;		/* INTR + 0x20 */
-	u32 enc_status;		/* INTR + 0x24 */
-	u32 crit_status;	/* INTR + 0x28 */
-	u32 main_status;	/* INTR + 0x2c */
-	u32 per_status;		/* INTR + 0x30 */
-	u32 reserved2;		/* INTR + 0x34 */
-	u32 per_error;		/* INTR + 0x38 */
-};
-
 /* Memory Mapping Control */
 struct mpc52xx_mmap_ctl {
 	u32 mbar;		/* MMAP_CTRL + 0x00 */