Skip to content

L
linux
Commit e6717dba authored by Stephan Gerhold's avatar Stephan Gerhold Committed by Bjorn Andersson
Browse files
Options

arm64: dts: qcom: msm8916: avoid using _ in node names 

Many nodes in the MSM8916 device trees use '_' in node names
(especially pinctrl), even though (seemingly) '-' is preferred now.
Make this more consistent by replacing '_' with '-' where possible.

Similar naming is used for pinctrl in newer device trees (e.g. sdm845.dtsi).
Signed-off-by: default avatarStephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200514112754.148919-1-stephan@gerhold.netSigned-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent 2536bede
Show whitespace changes
Inline Side-by-side
Showing with 116 additions and 117 deletions
arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
View file @ e6717dba
......@@ -4,7 +4,7 @@
&pm8916_gpios {
usb_hub_reset_pm: usb_hub_reset_pm {
usb_hub_reset_pm: usb-hub-reset-pm {
pinconf {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
......@@ -13,7 +13,7 @@ pinconf {
};
};
usb_hub_reset_pm_device: usb_hub_reset_pm_device {
usb_hub_reset_pm_device: usb-hub-reset-pm-device {
pinconf {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
......@@ -21,7 +21,7 @@ pinconf {
};
};
usb_sw_sel_pm: usb_sw_sel_pm {
usb_sw_sel_pm: usb-sw-sel-pm {
pinconf {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
......@@ -31,7 +31,7 @@ pinconf {
};
};
usb_sw_sel_pm_device: usb_sw_sel_pm_device {
usb_sw_sel_pm_device: usb-sw-sel-pm-device {
pinconf {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
......@@ -41,7 +41,7 @@ pinconf {
};
};
pm8916_gpios_leds: pm8916_gpios_leds {
pm8916_gpios_leds: pm8916-gpios-leds {
pinconf {
pins = "gpio1", "gpio2";
function = PMIC_GPIO_FUNC_NORMAL;
......@@ -55,7 +55,7 @@ &pm8916_mpps {
pinctrl-names = "default";
pinctrl-0 = <&ls_exp_gpio_f>;
ls_exp_gpio_f: pm8916_mpp4 {
ls_exp_gpio_f: pm8916-mpp4 {
pinconf {
pins = "mpp4";
function = "digital";
......@@ -64,7 +64,7 @@ pinconf {
};
};
pm8916_mpps_leds: pm8916_mpps_leds {
pm8916_mpps_leds: pm8916-mpps-leds {
pinconf {
pins = "mpp2", "mpp3";
function = "digital";
......
arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
View file @ e6717dba
......@@ -4,7 +4,7 @@
&msmgpio {
msmgpio_leds: msmgpio_leds {
msmgpio_leds: msmgpio-leds {
pinconf {
pins = "gpio21", "gpio120";
function = "gpio";
......@@ -26,7 +26,7 @@ pinconf {
};
};
adv7533_int_active: adv533_int_active {
adv7533_int_active: adv533-int-active {
pinmux {
function = "gpio";
pins = "gpio31";
......@@ -38,7 +38,7 @@ pinconf {
};
};
adv7533_int_suspend: adv7533_int_suspend {
adv7533_int_suspend: adv7533-int-suspend {
pinmux {
function = "gpio";
pins = "gpio31";
......@@ -50,7 +50,7 @@ pinconf {
};
};
adv7533_switch_active: adv7533_switch_active {
adv7533_switch_active: adv7533-switch-active {
pinmux {
function = "gpio";
pins = "gpio32";
......@@ -62,7 +62,7 @@ pinconf {
};
};
adv7533_switch_suspend: adv7533_switch_suspend {
adv7533_switch_suspend: adv7533-switch-suspend {
pinmux {
function = "gpio";
pins = "gpio32";
......@@ -74,7 +74,7 @@ pinconf {
};
};
msm_key_volp_n_default: msm_key_volp_n_default {
msm_key_volp_n_default: msm-key-volp-n-default {
pinmux {
function = "gpio";
pins = "gpio107";
......
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
View file @ e6717dba
......@@ -51,7 +51,7 @@ chosen {
stdout-path = "serial0";
};
camera_vdddo_1v8: camera_vdddo_1v8 {
camera_vdddo_1v8: camera-vdddo-1v8 {
compatible = "regulator-fixed";
regulator-name = "camera_vdddo";
regulator-min-microvolt = <1800000>;
......@@ -59,7 +59,7 @@ camera_vdddo_1v8: camera_vdddo_1v8 {
regulator-always-on;
};
camera_vdda_2v8: camera_vdda_2v8 {
camera_vdda_2v8: camera-vdda-2v8 {
compatible = "regulator-fixed";
regulator-name = "camera_vdda";
regulator-min-microvolt = <2800000>;
......@@ -67,7 +67,7 @@ camera_vdda_2v8: camera_vdda_2v8 {
regulator-always-on;
};
camera_vddd_1v5: camera_vddd_1v5 {
camera_vddd_1v5: camera-vddd-1v5 {
compatible = "regulator-fixed";
regulator-name = "camera_vddd";
regulator-min-microvolt = <1500000>;
......@@ -566,7 +566,7 @@ hdmi_con: endpoint {
};
};
gpio_keys {
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
......
arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
View file @ e6717dba
......@@ -109,7 +109,7 @@ volume-up {
};
&msmgpio {
gpio_keys_default: gpio_keys_default {
gpio_keys_default: gpio-keys-default {
pinmux {
function = "gpio";
pins = "gpio107";
......
arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
View file @ e6717dba
......@@ -5,7 +5,7 @@
&msmgpio {
blsp1_uart1_default: blsp1_uart1_default {
blsp1_uart1_default: blsp1-uart1-default {
pinmux {
function = "blsp_uart1";
// TX, RX, CTS_N, RTS_N
......@@ -20,7 +20,7 @@ pinconf {
};
};
blsp1_uart1_sleep: blsp1_uart1_sleep {
blsp1_uart1_sleep: blsp1-uart1-sleep {
pinmux {
function = "gpio";
pins = "gpio0", "gpio1",
......@@ -34,7 +34,7 @@ pinconf {
};
};
blsp1_uart2_default: blsp1_uart2_default {
blsp1_uart2_default: blsp1-uart2-default {
pinmux {
function = "blsp_uart2";
pins = "gpio4", "gpio5";
......@@ -46,7 +46,7 @@ pinconf {
};
};
blsp1_uart2_sleep: blsp1_uart2_sleep {
blsp1_uart2_sleep: blsp1-uart2-sleep {
pinmux {
function = "gpio";
pins = "gpio4", "gpio5";
......@@ -58,12 +58,12 @@ pinconf {
};
};
spi1_default: spi1_default {
spi1_default: spi1-default {
pinmux {
function = "blsp_spi1";
pins = "gpio0", "gpio1", "gpio3";
};
pinmux_cs {
pinmux-cs {
function = "gpio";
pins = "gpio2";
};
......@@ -72,7 +72,7 @@ pinconf {
drive-strength = <12>;
bias-disable;
};
pinconf_cs {
pinconf-cs {
pins = "gpio2";
drive-strength = <16>;
bias-disable;
......@@ -80,7 +80,7 @@ pinconf_cs {
};
};
spi1_sleep: spi1_sleep {
spi1_sleep: spi1-sleep {
pinmux {
function = "gpio";
pins = "gpio0", "gpio1", "gpio2", "gpio3";
......@@ -92,12 +92,12 @@ pinconf {
};
};
spi2_default: spi2_default {
spi2_default: spi2-default {
pinmux {
function = "blsp_spi2";
pins = "gpio4", "gpio5", "gpio7";
};
pinmux_cs {
pinmux-cs {
function = "gpio";
pins = "gpio6";
};
......@@ -106,7 +106,7 @@ pinconf {
drive-strength = <12>;
bias-disable;
};
pinconf_cs {
pinconf-cs {
pins = "gpio6";
drive-strength = <16>;
bias-disable;
......@@ -114,7 +114,7 @@ pinconf_cs {
};
};
spi2_sleep: spi2_sleep {
spi2_sleep: spi2-sleep {
pinmux {
function = "gpio";
pins = "gpio4", "gpio5", "gpio6", "gpio7";
......@@ -126,12 +126,12 @@ pinconf {
};
};
spi3_default: spi3_default {
spi3_default: spi3-default {
pinmux {
function = "blsp_spi3";
pins = "gpio8", "gpio9", "gpio11";
};
pinmux_cs {
pinmux-cs {
function = "gpio";
pins = "gpio10";
};
......@@ -140,7 +140,7 @@ pinconf {
drive-strength = <12>;
bias-disable;
};
pinconf_cs {
pinconf-cs {
pins = "gpio10";
drive-strength = <16>;
bias-disable;
......@@ -148,7 +148,7 @@ pinconf_cs {
};
};
spi3_sleep: spi3_sleep {
spi3_sleep: spi3-sleep {
pinmux {
function = "gpio";
pins = "gpio8", "gpio9", "gpio10", "gpio11";
......@@ -160,12 +160,12 @@ pinconf {
};
};
spi4_default: spi4_default {
spi4_default: spi4-default {
pinmux {
function = "blsp_spi4";
pins = "gpio12", "gpio13", "gpio15";
};
pinmux_cs {
pinmux-cs {
function = "gpio";
pins = "gpio14";
};
......@@ -174,7 +174,7 @@ pinconf {
drive-strength = <12>;
bias-disable;
};
pinconf_cs {
pinconf-cs {
pins = "gpio14";
drive-strength = <16>;
bias-disable;
......@@ -182,7 +182,7 @@ pinconf_cs {
};
};
spi4_sleep: spi4_sleep {
spi4_sleep: spi4-sleep {
pinmux {
function = "gpio";
pins = "gpio12", "gpio13", "gpio14", "gpio15";
......@@ -194,12 +194,12 @@ pinconf {
};
};
spi5_default: spi5_default {
spi5_default: spi5-default {
pinmux {
function = "blsp_spi5";
pins = "gpio16", "gpio17", "gpio19";
};
pinmux_cs {
pinmux-cs {
function = "gpio";
pins = "gpio18";
};
......@@ -208,7 +208,7 @@ pinconf {
drive-strength = <12>;
bias-disable;
};
pinconf_cs {
pinconf-cs {
pins = "gpio18";
drive-strength = <16>;
bias-disable;
......@@ -216,7 +216,7 @@ pinconf_cs {
};
};
spi5_sleep: spi5_sleep {
spi5_sleep: spi5-sleep {
pinmux {
function = "gpio";
pins = "gpio16", "gpio17", "gpio18", "gpio19";
......@@ -228,12 +228,12 @@ pinconf {
};
};
spi6_default: spi6_default {
spi6_default: spi6-default {
pinmux {
function = "blsp_spi6";
pins = "gpio20", "gpio21", "gpio23";
};
pinmux_cs {
pinmux-cs {
function = "gpio";
pins = "gpio22";
};
......@@ -242,7 +242,7 @@ pinconf {
drive-strength = <12>;
bias-disable;
};
pinconf_cs {
pinconf-cs {
pins = "gpio22";
drive-strength = <16>;
bias-disable;
......@@ -250,7 +250,7 @@ pinconf_cs {
};
};
spi6_sleep: spi6_sleep {
spi6_sleep: spi6-sleep {
pinmux {
function = "gpio";
pins = "gpio20", "gpio21", "gpio22", "gpio23";
......@@ -262,7 +262,7 @@ pinconf {
};
};
i2c1_default: i2c1_default {
i2c1_default: i2c1-default {
pinmux {
function = "blsp_i2c1";
pins = "gpio2", "gpio3";
......@@ -274,7 +274,7 @@ pinconf {
};
};
i2c1_sleep: i2c1_sleep {
i2c1_sleep: i2c1-sleep {
pinmux {
function = "gpio";
pins = "gpio2", "gpio3";
......@@ -286,7 +286,7 @@ pinconf {
};
};
i2c2_default: i2c2_default {
i2c2_default: i2c2-default {
pinmux {
function = "blsp_i2c2";
pins = "gpio6", "gpio7";
......@@ -298,7 +298,7 @@ pinconf {
};
};
i2c2_sleep: i2c2_sleep {
i2c2_sleep: i2c2-sleep {
pinmux {
function = "gpio";
pins = "gpio6", "gpio7";
......@@ -310,7 +310,7 @@ pinconf {
};
};
i2c4_default: i2c4_default {
i2c4_default: i2c4-default {
pinmux {
function = "blsp_i2c4";
pins = "gpio14", "gpio15";
......@@ -322,7 +322,7 @@ pinconf {
};
};
i2c4_sleep: i2c4_sleep {
i2c4_sleep: i2c4-sleep {
pinmux {
function = "gpio";
pins = "gpio14", "gpio15";
......@@ -334,7 +334,7 @@ pinconf {
};
};
i2c5_default: i2c5_default {
i2c5_default: i2c5-default {
pinmux {
function = "blsp_i2c5";
pins = "gpio18", "gpio19";
......@@ -346,7 +346,7 @@ pinconf {
};
};
i2c5_sleep: i2c5_sleep {
i2c5_sleep: i2c5-sleep {
pinmux {
function = "gpio";
pins = "gpio18", "gpio19";
......@@ -358,7 +358,7 @@ pinconf {
};
};
i2c6_default: i2c6_default {
i2c6_default: i2c6-default {
pinmux {
function = "blsp_i2c6";
pins = "gpio22", "gpio23";
......@@ -370,7 +370,7 @@ pinconf {
};
};
i2c6_sleep: i2c6_sleep {
i2c6_sleep: i2c6-sleep {
pinmux {
function = "gpio";
pins = "gpio22", "gpio23";
......@@ -382,8 +382,8 @@ pinconf {
};
};
pmx_sdc1_clk {
sdc1_clk_on: clk_on {
pmx-sdc1-clk {
sdc1_clk_on: clk-on {
pinmux {
pins = "sdc1_clk";
};
......@@ -393,7 +393,7 @@ pinconf {
drive-strength = <16>;
};
};
sdc1_clk_off: clk_off {
sdc1_clk_off: clk-off {
pinmux {
pins = "sdc1_clk";
};
......@@ -405,8 +405,8 @@ pinconf {
};
};
pmx_sdc1_cmd {
sdc1_cmd_on: cmd_on {
pmx-sdc1-cmd {
sdc1_cmd_on: cmd-on {
pinmux {
pins = "sdc1_cmd";
};
......@@ -416,7 +416,7 @@ pinconf {
drive-strength = <10>;
};
};
sdc1_cmd_off: cmd_off {
sdc1_cmd_off: cmd-off {
pinmux {
pins = "sdc1_cmd";
};
......@@ -428,8 +428,8 @@ pinconf {
};
};
pmx_sdc1_data {
sdc1_data_on: data_on {
pmx-sdc1-data {
sdc1_data_on: data-on {
pinmux {
pins = "sdc1_data";
};
......@@ -439,7 +439,7 @@ pinconf {
drive-strength = <10>;
};
};
sdc1_data_off: data_off {
sdc1_data_off: data-off {
pinmux {
pins = "sdc1_data";
};
......@@ -451,8 +451,8 @@ pinconf {
};
};
pmx_sdc2_clk {
sdc2_clk_on: clk_on {
pmx-sdc2-clk {
sdc2_clk_on: clk-on {
pinmux {
pins = "sdc2_clk";
};
......@@ -462,7 +462,7 @@ pinconf {
drive-strength = <16>;
};
};
sdc2_clk_off: clk_off {
sdc2_clk_off: clk-off {
pinmux {
pins = "sdc2_clk";
};
......@@ -474,8 +474,8 @@ pinconf {
};
};
pmx_sdc2_cmd {
sdc2_cmd_on: cmd_on {
pmx-sdc2-cmd {
sdc2_cmd_on: cmd-on {
pinmux {
pins = "sdc2_cmd";
};
......@@ -485,7 +485,7 @@ pinconf {
drive-strength = <10>;
};
};
sdc2_cmd_off: cmd_off {
sdc2_cmd_off: cmd-off {
pinmux {
pins = "sdc2_cmd";
};
......@@ -497,8 +497,8 @@ pinconf {
};
};
pmx_sdc2_data {
sdc2_data_on: data_on {
pmx-sdc2-data {
sdc2_data_on: data-on {
pinmux {
pins = "sdc2_data";
};
......@@ -508,7 +508,7 @@ pinconf {
drive-strength = <10>;
};
};
sdc2_data_off: data_off {
sdc2_data_off: data-off {
pinmux {
pins = "sdc2_data";
};
......@@ -520,8 +520,8 @@ pinconf {
};
};
pmx_sdc2_cd_pin {
sdc2_cd_on: cd_on {
pmx-sdc2-cd-pin {
sdc2_cd_on: cd-on {
pinmux {
function = "gpio";
pins = "gpio38";
......@@ -532,7 +532,7 @@ pinconf {
bias-pull-up;
};
};
sdc2_cd_off: cd_off {
sdc2_cd_off: cd-off {
pinmux {
function = "gpio";
pins = "gpio38";
......@@ -546,7 +546,7 @@ pinconf {
};
cdc-pdm-lines {
cdc_pdm_lines_act: pdm_lines_on {
cdc_pdm_lines_act: pdm-lines-on {
pinmux {
function = "cdc_pdm0";
pins = "gpio63", "gpio64", "gpio65", "gpio66",
......@@ -559,7 +559,7 @@ pinconf {
bias-pull-none;
};
};
cdc_pdm_lines_sus: pdm_lines_off {
cdc_pdm_lines_sus: pdm-lines-off {
pinmux {
function = "cdc_pdm0";
pins = "gpio63", "gpio64", "gpio65", "gpio66",
......@@ -575,7 +575,7 @@ pinconf {
};
ext-pri-tlmm-lines {
ext_pri_tlmm_lines_act: ext_pa_on {
ext_pri_tlmm_lines_act: ext-pa-on {
pinmux {
function = "pri_mi2s";
pins = "gpio113", "gpio114", "gpio115",
......@@ -589,7 +589,7 @@ pinconf {
};
};
ext_pri_tlmm_lines_sus: ext_pa_off {
ext_pri_tlmm_lines_sus: ext-pa-off {
pinmux {
function = "pri_mi2s";
pins = "gpio113", "gpio114", "gpio115",
......@@ -605,7 +605,7 @@ pinconf {
};
ext-pri-ws-line {
ext_pri_ws_act: ext_pa_on {
ext_pri_ws_act: ext-pa-on {
pinmux {
function = "pri_mi2s_ws";
pins = "gpio110";
......@@ -617,7 +617,7 @@ pinconf {
};
};
ext_pri_ws_sus: ext_pa_off {
ext_pri_ws_sus: ext-pa-off {
pinmux {
function = "pri_mi2s_ws";
pins = "gpio110";
......@@ -631,7 +631,7 @@ pinconf {
};
ext-mclk-tlmm-lines {
ext_mclk_tlmm_lines_act: mclk_lines_on {
ext_mclk_tlmm_lines_act: mclk-lines-on {
pinmux {
function = "pri_mi2s";
pins = "gpio116";
......@@ -642,7 +642,7 @@ pinconf {
bias-pull-none;
};
};
ext_mclk_tlmm_lines_sus: mclk_lines_off {
ext_mclk_tlmm_lines_sus: mclk-lines-off {
pinmux {
function = "pri_mi2s";
pins = "gpio116";
......@@ -657,7 +657,7 @@ pinconf {
/* secondary Mi2S */
ext-sec-tlmm-lines {
ext_sec_tlmm_lines_act: tlmm_lines_on {
ext_sec_tlmm_lines_act: tlmm-lines-on {
pinmux {
function = "sec_mi2s";
pins = "gpio112", "gpio117", "gpio118",
......@@ -670,7 +670,7 @@ pinconf {
bias-pull-none;
};
};
ext_sec_tlmm_lines_sus: tlmm_lines_off {
ext_sec_tlmm_lines_sus: tlmm-lines-off {
pinmux {
function = "sec_mi2s";
pins = "gpio112", "gpio117", "gpio118",
......@@ -686,12 +686,12 @@ pinconf {
};
cdc-dmic-lines {
cdc_dmic_lines_act: dmic_lines_on {
pinmux_dmic0_clk {
cdc_dmic_lines_act: dmic-lines-on {
pinmux-dmic0-clk {
function = "dmic0_clk";
pins = "gpio0";
};
pinmux_dmic0_data {
pinmux-dmic0-data {
function = "dmic0_data";
pins = "gpio1";
};
......@@ -700,12 +700,12 @@ pinconf {
drive-strength = <8>;
};
};
cdc_dmic_lines_sus: dmic_lines_off {
pinmux_dmic0_clk {
cdc_dmic_lines_sus: dmic-lines-off {
pinmux-dmic0-clk {
function = "dmic0_clk";
pins = "gpio0";
};
pinmux_dmic0_data {
pinmux-dmic0-data {
function = "dmic0_data";
pins = "gpio1";
};
......@@ -722,7 +722,6 @@ pinmux {
pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
function = "wcss_wlan";
};
pinconf {
pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
drive-strength = <6>;
......@@ -730,7 +729,7 @@ pinconf {
};
};
cci0_default: cci0_default {
cci0_default: cci0-default {
pinmux {
function = "cci_i2c";
pins = "gpio29", "gpio30";
......@@ -742,64 +741,64 @@ pinconf {
};
};
camera_front_default: camera_front_default {
pinmux_pwdn {
camera_front_default: camera-front-default {
pinmux-pwdn {
function = "gpio";
pins = "gpio33";
};
pinconf_pwdn {
pinconf-pwdn {
pins = "gpio33";
drive-strength = <16>;
bias-disable;
};
pinmux_rst {
pinmux-rst {
function = "gpio";
pins = "gpio28";
};
pinconf_rst {
pinconf-rst {
pins = "gpio28";
drive-strength = <16>;
bias-disable;
};
pinmux_mclk1 {
pinmux-mclk1 {
function = "cam_mclk1";
pins = "gpio27";
};
pinconf_mclk1 {
pinconf-mclk1 {
pins = "gpio27";
drive-strength = <16>;
bias-disable;
};
};
camera_rear_default: camera_rear_default {
pinmux_pwdn {
camera_rear_default: camera-rear-default {
pinmux-pwdn {
function = "gpio";
pins = "gpio34";
};
pinconf_pwdn {
pinconf-pwdn {
pins = "gpio34";
drive-strength = <16>;
bias-disable;
};
pinmux_rst {
pinmux-rst {
function = "gpio";
pins = "gpio35";
};
pinconf_rst {
pinconf-rst {
pins = "gpio35";
drive-strength = <16>;
bias-disable;
};
pinmux_mclk0 {
pinmux-mclk0 {
function = "cam_mclk0";
pins = "gpio26";
};
pinconf_mclk0 {
pinconf-mclk0 {
pins = "gpio26";
drive-strength = <16>;
bias-disable;
......
arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
View file @ e6717dba
......@@ -168,7 +168,7 @@ muic: sm5502@25 {
};
&msmgpio {
gpio_keys_default: gpio_keys_default {
gpio_keys_default: gpio-keys-default {
pinmux {
function = "gpio";
pins = "gpio107", "gpio109";
......@@ -180,7 +180,7 @@ pinconf {
};
};
gpio_hall_sensor_default: gpio_hall_sensor_default {
gpio_hall_sensor_default: gpio-hall-sensor-default {
pinmux {
function = "gpio";
pins = "gpio52";
......@@ -192,7 +192,7 @@ pinconf {
};
};
muic_int_default: muic_int_default {
muic_int_default: muic-int-default {
pinmux {
function = "gpio";
pins = "gpio12";
......
arch/arm64/boot/dts/qcom/msm8916.dtsi
View file @ e6717dba
......@@ -340,7 +340,7 @@ modem_alert0: trip-point0 {
};
cpu_opp_table: cpu_opp_table {
cpu_opp_table: cpu-opp-table {
compatible = "operating-points-v2";
opp-shared;
......@@ -358,7 +358,7 @@ opp-998400000 {
};
};
gpu_opp_table: opp_table {
gpu_opp_table: gpu-opp-table {
compatible = "operating-points-v2";
opp-400000000 {
......@@ -378,13 +378,13 @@ timer {
};
clocks {
xo_board: xo_board {
xo_board: xo-board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
};
sleep_clk: sleep_clk {
sleep_clk: sleep-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
......@@ -1783,7 +1783,7 @@ rpm {
qcom,ipc = <&apcs 8 0>;
qcom,smd-edge = <15>;
rpm_requests {
rpm-requests {
compatible = "qcom,rpm-msm8916";
qcom,smd-channels = "rpm_requests";
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7