Commit e7385de5 authored by Gregor Boirie's avatar Gregor Boirie Committed by Jonathan Cameron

iio:st_sensors: align on storagebits boundaries

Ensure triggered buffering memory accesses are properly aligned on per
channel storagebits boundaries.
Signed-off-by: default avatarGregor Boirie <gregor.boirie@parrot.com>
Tested-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
parent fc6bd727
......@@ -24,30 +24,29 @@
static int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf)
{
int i, len;
int total = 0;
int i;
struct st_sensor_data *sdata = iio_priv(indio_dev);
unsigned int num_data_channels = sdata->num_data_channels;
for (i = 0; i < num_data_channels; i++) {
unsigned int bytes_to_read;
if (test_bit(i, indio_dev->active_scan_mask)) {
bytes_to_read = indio_dev->channels[i].scan_type.storagebits >> 3;
len = sdata->tf->read_multiple_byte(&sdata->tb,
sdata->dev, indio_dev->channels[i].address,
bytes_to_read,
buf + total, sdata->multiread_bit);
if (len < bytes_to_read)
for_each_set_bit(i, indio_dev->active_scan_mask, num_data_channels) {
const struct iio_chan_spec *channel = &indio_dev->channels[i];
unsigned int bytes_to_read = channel->scan_type.realbits >> 3;
unsigned int storage_bytes =
channel->scan_type.storagebits >> 3;
buf = PTR_ALIGN(buf, storage_bytes);
if (sdata->tf->read_multiple_byte(&sdata->tb, sdata->dev,
channel->address,
bytes_to_read, buf,
sdata->multiread_bit) <
bytes_to_read)
return -EIO;
/* Advance the buffer pointer */
total += len;
}
buf += storage_bytes;
}
return total;
return 0;
}
irqreturn_t st_sensors_trigger_handler(int irq, void *p)
......
......@@ -490,7 +490,7 @@ static int st_sensors_read_axis_data(struct iio_dev *indio_dev,
int err;
u8 *outdata;
struct st_sensor_data *sdata = iio_priv(indio_dev);
unsigned int byte_for_channel = ch->scan_type.storagebits >> 3;
unsigned int byte_for_channel = ch->scan_type.realbits >> 3;
outdata = kmalloc(byte_for_channel, GFP_KERNEL);
if (!outdata)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment