ia64: Switch over to using ACPI PCI support routines. This gets rid of much of the

	code-duplication that existed between ACPI and the ia64 IOSAPIC code.
	To make this work, the Makefiles had to be re-organized to ensure that
	the ACPI subsystem is initialized before PCI (even though both are called
	via subsys-initcalls).

arch/ia64/Makefile

@@ -86,11 +86,10 @@ endif
 
 HEAD := arch/$(ARCH)/kernel/head.o arch/ia64/kernel/init_task.o
 
-SUBDIRS := arch/$(ARCH)/tools arch/$(ARCH)/kernel arch/$(ARCH)/mm arch/$(ARCH)/lib $(SUBDIRS)
-CORE_FILES := arch/$(ARCH)/kernel/kernel.o arch/$(ARCH)/mm/mm.o $(CORE_FILES)
-
-LIBS := $(TOPDIR)/arch/$(ARCH)/lib/lib.a $(LIBS) \
-	$(TOPDIR)/arch/$(ARCH)/lib/lib.a
+libs-y				+= arch/$(ARCH)/lib/
+core-y				+= arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/
+drivers-$(CONFIG_PCI)		+= arch/$(ARCH)/pci/
+drivers-$(CONFIG_IA64_HP_ZX1)	+= arch/$(ARCH)/hp/common/ arch/$(ARCH)/hp/zx1/
 
 MAKEBOOT = $(MAKE) -C arch/$(ARCH)/boot
 

arch/ia64/config.in

@@ -68,6 +68,7 @@ if [ "$CONFIG_IA64_GENERIC" = "y" -o "$CONFIG_IA64_DIG" = "y" -o "$CONFIG_IA64_H
 then
 	bool '  Enable IA-64 Machine Check Abort' CONFIG_IA64_MCA
 	define_bool CONFIG_PM y
+	define_bool CONFIG_IOSAPIC y
 fi
 
 if [ "$CONFIG_IA64_SGI_SN1" = "y" -o "$CONFIG_IA64_SGI_SN2" = "y" ]; then

arch/ia64/hp/Makefile

@@ -7,7 +7,6 @@ O_TARGET := hp.o
 
 subdir-$(CONFIG_IA64_GENERIC) += $(ALL_SUB_DIRS)
 subdir-$(CONFIG_IA64_HP_SIM) += sim
-subdir-$(CONFIG_IA64_HP_ZX1) += zx1 common
 
 SUB_DIRS := $(subdir-y)
 obj-y += $(join $(subdir-y),$(subdir-y:%=/%.o))

arch/ia64/hp/common/Makefile

@@ -5,8 +5,6 @@
 # Copyright (C) Alex Williamson (alex_williamson@hp.com)
 #
 
-O_TARGET := common.o
-
 export-objs := sba_iommu.o
 
 obj-y := sba_iommu.o

arch/ia64/hp/zx1/Makefile

 #
-# ia64/platform/hp/zx1/Makefile
+# ia64/hp/zx1/Makefile
 #
 # Copyright (C) 2002 Hewlett Packard
 # Copyright (C) Alex Williamson (alex_williamson@hp.com)
 #
 
-O_TARGET := zx1.o
-
 obj-y := hpzx1_misc.o
 obj-$(CONFIG_IA64_GENERIC) += hpzx1_machvec.o
 

arch/ia64/hp/zx1/hpzx1_misc.c

@@ -335,19 +335,14 @@ hpzx1_acpi_dev_init(void)
 
 extern void sba_init(void);
 
-void
-hpzx1_pci_fixup (int phase)
+static void
+hpzx1_init (void)
 {
-	iosapic_pci_fixup(phase);
-	switch (phase) {
-	      case 0:
 	/* zx1 has a hardware I/O TLB which lets us DMA from any device to any address */
 	MAX_DMA_ADDRESS = ~0UL;
-		break;
 
-	      case 1:
 	hpzx1_acpi_dev_init();
 	sba_init();
-		break;
-	}
 }
+
+subsys_initcall(hpzx1_init);

arch/ia64/kernel/Makefile

@@ -2,7 +2,6 @@
 # Makefile for the linux kernel.
 #
 
-O_TARGET	:= kernel.o
 EXTRA_TARGETS	:= head.o init_task.o
 
 export-objs := ia64_ksyms.o
@@ -10,12 +9,9 @@ export-objs := ia64_ksyms.o
 obj-y := acpi.o entry.o gate.o efi.o efi_stub.o ia64_ksyms.o irq.o irq_ia64.o irq_lsapic.o ivt.o \
 	 machvec.o pal.o process.o perfmon.o ptrace.o sal.o semaphore.o setup.o	\
 	 signal.o sys_ia64.o traps.o time.o unaligned.o unwind.o
-obj-$(CONFIG_IA64_GENERIC) += iosapic.o
-obj-$(CONFIG_IA64_HP_ZX1) += iosapic.o
-obj-$(CONFIG_IA64_DIG) += iosapic.o
+obj-$(CONFIG_IOSAPIC) += iosapic.o
 obj-$(CONFIG_IA64_PALINFO) += palinfo.o
 obj-$(CONFIG_EFI_VARS) += efivars.o
-obj-$(CONFIG_PCI) += pci.o
 obj-$(CONFIG_SMP) += smp.o smpboot.o
 obj-$(CONFIG_IA64_MCA) += mca.o mca_asm.o
 obj-$(CONFIG_IA64_BRL_EMU) += brl_emu.o

arch/ia64/kernel/mca.c

@@ -208,6 +208,8 @@ ia64_mca_check_errors (void)
 	ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA);
 }
 
+device_initcall(ia64_mca_check_errors);
+
 /*
  * ia64_mca_register_cpev
  *

arch/ia64/mm/Makefile

@@ -7,8 +7,6 @@
 #
 # Note 2! The CFLAGS definition is now in the main makefile...
 
-O_TARGET := mm.o
-
 obj-y	 := init.o fault.o tlb.o extable.o
 obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
 

arch/ia64/pci/Makefile

+obj-y		:= pci.o
+
+include $(TOPDIR)/Rules.make

arch/ia64/kernel/pci.c → arch/ia64/pci/pci.c

@@ -10,6 +10,7 @@
  */
 #include <linux/config.h>
 
+#include <linux/acpi.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
@@ -100,16 +101,29 @@ pci_sal_write (struct pci_bus *bus, unsigned int devfn, int where, int size, u32
 
 struct pci_ops pci_sal_ops = {
 	.read = 	pci_sal_read,
-	.write =	pci_sal_write,
+	.write =	pci_sal_write
 };
 
 struct pci_ops *pci_root_ops = &pci_sal_ops;	/* default to SAL */
 
+static int __init
+pci_acpi_init (void)
+{
+	if (!acpi_pci_irq_init())
+		printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n");
+	else
+		printk(KERN_WARNING "PCI: Invalid ACPI-PCI IRQ routing table\n");
+	return 0;
+}
+
+subsys_initcall(pci_acpi_init);
+
+/* Called by ACPI when it finds a new root bus.  */
 struct pci_bus *
 pcibios_scan_root (int bus)
 {
-	struct list_head *list = NULL;
-	struct pci_bus *pci_bus = NULL;
+	struct list_head *list;
+	struct pci_bus *pci_bus;
 
 	list_for_each(list, &pci_root_buses) {
 		pci_bus = pci_bus_b(list);
@@ -124,33 +138,8 @@ pcibios_scan_root (int bus)
 	return pci_scan_bus(bus, pci_root_ops, NULL);
 }
 
-static int __init
-pcibios_init (void)
-{
-#	define PCI_BUSES_TO_SCAN 255
-	int i = 0;
-
-acpi_init();	/* hackedy hack hack... */
-
-#ifdef CONFIG_IA64_MCA
-	ia64_mca_check_errors();    /* For post-failure MCA error logging */
-#endif
-
-	platform_pci_fixup(0);	/* phase 0 fixups (before buses scanned) */
-
-	printk("PCI: Probing PCI hardware\n");
-	for (i = 0; i < PCI_BUSES_TO_SCAN; i++)
-		pci_scan_bus(i, pci_root_ops, NULL);
-
-	platform_pci_fixup(1);	/* phase 1 fixups (after buses scanned) */
-	return 0;
-}
-
-subsys_initcall(pcibios_init);
-
 /*
- *  Called after each bus is probed, but before its children
- *  are examined.
+ *  Called after each bus is probed, but before its children are examined.
  */
 void __init
 pcibios_fixup_bus (struct pci_bus *b)
@@ -235,7 +224,7 @@ pcibios_enable_device (struct pci_dev *dev, int mask)
 		return ret;
 
 	printk(KERN_INFO "PCI: Found IRQ %d for device %s\n", dev->irq, dev->slot_name);
-	return 0;
+	return acpi_pci_irq_enable(dev);
 }
 
 void

include/asm-ia64/machvec.h

@@ -86,12 +86,10 @@ extern void machvec_noop (void);
 #  define platform_setup	ia64_mv.setup
 #  define platform_cpu_init	ia64_mv.cpu_init
 #  define platform_irq_init	ia64_mv.irq_init
-#  define platform_map_nr	ia64_mv.map_nr
 #  define platform_mca_init	ia64_mv.mca_init
 #  define platform_mca_handler	ia64_mv.mca_handler
 #  define platform_cmci_handler	ia64_mv.cmci_handler
 #  define platform_log_print	ia64_mv.log_print
-#  define platform_pci_fixup	ia64_mv.pci_fixup
 #  define platform_send_ipi	ia64_mv.send_ipi
 #  define platform_global_tlb_purge	ia64_mv.global_tlb_purge
 #  define platform_pci_dma_init		ia64_mv.dma_init
@@ -159,8 +157,6 @@ struct ia64_machine_vector {
 	platform_setup,				\
 	platform_cpu_init,			\
 	platform_irq_init,			\
-	platform_pci_fixup,			\
-	platform_map_nr,			\
 	platform_mca_init,			\
 	platform_mca_handler,			\
 	platform_cmci_handler,			\
@@ -237,9 +233,6 @@ extern ia64_mv_pci_dma_supported swiotlb_pci_dma_supported;
 #ifndef platform_log_print
 # define platform_log_print	((ia64_mv_log_print_t *) machvec_noop)
 #endif
-#ifndef platform_pci_fixup
-# define platform_pci_fixup	((ia64_mv_pci_fixup_t *) machvec_noop)
-#endif
 #ifndef platform_send_ipi
 # define platform_send_ipi	ia64_send_ipi	/* default to architected version */
 #endif

include/asm-ia64/machvec_dig.h

@@ -16,7 +16,5 @@ extern ia64_mv_map_nr_t map_nr_dense;
 #define platform_name		"dig"
 #define platform_setup		dig_setup
 #define platform_irq_init	dig_irq_init
-#define platform_pci_fixup	iosapic_pci_fixup
-#define platform_map_nr		map_nr_dense
 
 #endif /* _ASM_IA64_MACHVEC_DIG_h */

include/asm-ia64/machvec_hpsim.h

@@ -15,6 +15,5 @@ extern ia64_mv_map_nr_t map_nr_dense;
 #define platform_name		"hpsim"
 #define platform_setup		hpsim_setup
 #define platform_irq_init	hpsim_irq_init
-#define platform_map_nr		map_nr_dense
 
 #endif /* _ASM_IA64_MACHVEC_HPSIM_h */

include/asm-ia64/machvec_hpzx1.h

@@ -22,8 +22,6 @@ extern ia64_mv_pci_dma_supported sba_dma_supported;
  */
 #define platform_name			"hpzx1"
 #define platform_setup			dig_setup
-#define platform_pci_fixup		hpzx1_pci_fixup
-#define platform_map_nr			map_nr_dense
 #define platform_pci_dma_init		((ia64_mv_pci_dma_init *) machvec_noop)
 #define platform_pci_alloc_consistent	sba_alloc_consistent
 #define platform_pci_free_consistent	sba_free_consistent

include/asm-ia64/machvec_sn1.h

@@ -68,10 +68,8 @@ extern ia64_mv_pci_dma_address		sn1_dma_address;
 #define platform_setup		sn1_setup
 #define platform_cpu_init	sn_cpu_init
 #define platform_irq_init	sn1_irq_init
-#define platform_map_nr		sn1_map_nr
 #define platform_send_ipi	sn1_send_IPI
 #define platform_global_tlb_purge       sn1_global_tlb_purge
-#define platform_pci_fixup	sn1_pci_fixup
 #define platform_inb		sn1_inb
 #define platform_inw		sn1_inw
 #define platform_inl		sn1_inl

include/asm-ia64/machvec_sn2.h

@@ -73,10 +73,8 @@ extern ia64_mv_pci_dma_address		sn1_dma_address;
 #define platform_setup		sn1_setup
 #define platform_cpu_init	sn_cpu_init
 #define platform_irq_init	sn1_irq_init
-#define platform_map_nr		sn2_map_nr
 #define platform_send_ipi	sn2_send_IPI
 #define platform_global_tlb_purge       sn2_global_tlb_purge
-#define platform_pci_fixup	sn1_pci_fixup
 #ifdef Colin /* We are using the same is Generic IA64 calls defined in io.h */
 #define platform_inb		sn1_inb
 #define platform_inw		sn1_inw