driver core: Rename flag AUTOREMOVE to AUTOREMOVE_CONSUMER

Now that we want to add another flag to autoremove the device link
on supplier unbind, it's fair to rename the existing flag from
DL_FLAG_AUTOREMOVE to DL_FLAG_AUTOREMOVE_CONSUMER so that we can
add similar flag for supplier later.
And, while we are touching device.h, fix a doc build warning.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Documentation/driver-api/device_link.rst

@@ -81,10 +81,10 @@ integration is desired.
 Two other flags are specifically targeted at use cases where the device
 link is added from the consumer's ``->probe`` callback:  ``DL_FLAG_RPM_ACTIVE``
 can be specified to runtime resume the supplier upon addition of the
-device link.  ``DL_FLAG_AUTOREMOVE`` causes the device link to be automatically
-purged when the consumer fails to probe or later unbinds.  This obviates
-the need to explicitly delete the link in the ``->remove`` callback or in
-the error path of the ``->probe`` callback.
+device link.  ``DL_FLAG_AUTOREMOVE_CONSUMER`` causes the device link to be
+automatically purged when the consumer fails to probe or later unbinds.
+This obviates the need to explicitly delete the link in the ``->remove``
+callback or in the error path of the ``->probe`` callback.
 
 Limitations
 ===========

drivers/base/core.c

@@ -178,10 +178,10 @@ void device_pm_move_to_tail(struct device *dev)
  * of the link.  If DL_FLAG_PM_RUNTIME is not set, DL_FLAG_RPM_ACTIVE will be
  * ignored.
  *
- * If the DL_FLAG_AUTOREMOVE is set, the link will be removed automatically
- * when the consumer device driver unbinds from it.  The combination of both
- * DL_FLAG_AUTOREMOVE and DL_FLAG_STATELESS set is invalid and will cause NULL
- * to be returned.
+ * If the DL_FLAG_AUTOREMOVE_CONSUMER is set, the link will be removed
+ * automatically when the consumer device driver unbinds from it.
+ * The combination of both DL_FLAG_AUTOREMOVE_CONSUMER and DL_FLAG_STATELESS
+ * set is invalid and will cause NULL to be returned.
  *
  * A side effect of the link creation is re-ordering of dpm_list and the
  * devices_kset list by moving the consumer device and all devices depending
@@ -198,7 +198,8 @@ struct device_link *device_link_add(struct device *consumer,
 	struct device_link *link;
 
 	if (!consumer || !supplier ||
-	    ((flags & DL_FLAG_STATELESS) && (flags & DL_FLAG_AUTOREMOVE)))
+	    ((flags & DL_FLAG_STATELESS) &&
+	     (flags & DL_FLAG_AUTOREMOVE_CONSUMER)))
 		return NULL;
 
 	device_links_write_lock();
@@ -479,7 +480,7 @@ static void __device_links_no_driver(struct device *dev)
 		if (link->flags & DL_FLAG_STATELESS)
 			continue;
 
-		if (link->flags & DL_FLAG_AUTOREMOVE)
+		if (link->flags & DL_FLAG_AUTOREMOVE_CONSUMER)
 			kref_put(&link->kref, __device_link_del);
 		else if (link->status != DL_STATE_SUPPLIER_UNBIND)
 			WRITE_ONCE(link->status, DL_STATE_AVAILABLE);
@@ -515,7 +516,7 @@ void device_links_driver_cleanup(struct device *dev)
 		if (link->flags & DL_FLAG_STATELESS)
 			continue;
 
-		WARN_ON(link->flags & DL_FLAG_AUTOREMOVE);
+		WARN_ON(link->flags & DL_FLAG_AUTOREMOVE_CONSUMER);
 		WARN_ON(link->status != DL_STATE_SUPPLIER_UNBIND);
 		WRITE_ONCE(link->status, DL_STATE_DORMANT);
 	}

drivers/gpu/drm/tegra/dc.c

@@ -2312,7 +2312,7 @@ static int tegra_dc_couple(struct tegra_dc *dc)
 	 * POWER_CONTROL registers during CRTC enabling.
 	 */
 	if (dc->soc->coupled_pm && dc->pipe == 1) {
-		u32 flags = DL_FLAG_PM_RUNTIME | DL_FLAG_AUTOREMOVE;
+		u32 flags = DL_FLAG_PM_RUNTIME | DL_FLAG_AUTOREMOVE_CONSUMER;
 		struct device_link *link;
 		struct device *partner;
 

drivers/gpu/ipu-v3/ipu-pre.c

@@ -128,7 +128,8 @@ ipu_pre_lookup_by_phandle(struct device *dev, const char *name, int index)
 	list_for_each_entry(pre, &ipu_pre_list, list) {
 		if (pre_node == pre->dev->of_node) {
 			mutex_unlock(&ipu_pre_list_mutex);
-			device_link_add(dev, pre->dev, DL_FLAG_AUTOREMOVE);
+			device_link_add(dev, pre->dev,
+					DL_FLAG_AUTOREMOVE_CONSUMER);
 			of_node_put(pre_node);
 			return pre;
 		}

drivers/gpu/ipu-v3/ipu-prg.c

@@ -100,7 +100,8 @@ ipu_prg_lookup_by_phandle(struct device *dev, const char *name, int ipu_id)
 	list_for_each_entry(prg, &ipu_prg_list, list) {
 		if (prg_node == prg->dev->of_node) {
 			mutex_unlock(&ipu_prg_list_mutex);
-			device_link_add(dev, prg->dev, DL_FLAG_AUTOREMOVE);
+			device_link_add(dev, prg->dev,
+					DL_FLAG_AUTOREMOVE_CONSUMER);
 			prg->id = ipu_id;
 			of_node_put(prg_node);
 			return prg;

drivers/soc/imx/gpc.c

@@ -202,7 +202,7 @@ static int imx_pgc_power_domain_probe(struct platform_device *pdev)
 			goto genpd_err;
 	}
 
-	device_link_add(dev, dev->parent, DL_FLAG_AUTOREMOVE);
+	device_link_add(dev, dev->parent, DL_FLAG_AUTOREMOVE_CONSUMER);
 
 	return 0;
 

include/linux/device.h

@@ -90,7 +90,7 @@ extern void bus_remove_file(struct bus_type *, struct bus_attribute *);
  * @num_vf:	Called to find out how many virtual functions a device on this
  *		bus supports.
  * @dma_configure:	Called to setup DMA configuration on a device on
-			this bus.
+ *			this bus.
  * @pm:		Power management operations of this bus, callback the specific
  *		device driver's pm-ops.
  * @iommu_ops:  IOMMU specific operations for this bus, used to attach IOMMU
@@ -784,12 +784,12 @@ enum device_link_state {
  * Device link flags.
  *
  * STATELESS: The core won't track the presence of supplier/consumer drivers.
- * AUTOREMOVE: Remove this link automatically on consumer driver unbind.
+ * AUTOREMOVE_CONSUMER: Remove the link automatically on consumer driver unbind.
  * PM_RUNTIME: If set, the runtime PM framework will use this link.
  * RPM_ACTIVE: Run pm_runtime_get_sync() on the supplier during link creation.
  */
 #define DL_FLAG_STATELESS		BIT(0)
-#define DL_FLAG_AUTOREMOVE	BIT(1)
+#define DL_FLAG_AUTOREMOVE_CONSUMER	BIT(1)
 #define DL_FLAG_PM_RUNTIME		BIT(2)
 #define DL_FLAG_RPM_ACTIVE		BIT(3)