Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
 "Some small fixes for the new sunxi clk driver introduced this merge
  window"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: sunxi-ng: Fix wrong reset register offsets
  clk: sunxi-ng: nk: Make ccu_nk_find_best static
  clk: sunxi-ng: Fix inverted test condition in ccu_helper_wait_for_lock
  clk: sunxi: Fix return value check in sun8i_a23_mbus_setup()
  clk: sunxi: pll2: Fix return value check in sun4i_pll2_setup()

drivers/clk/sunxi-ng/ccu-sun8i-h3.c

@@ -783,14 +783,14 @@ static struct ccu_reset_map sun8i_h3_ccu_resets[] = {
 	[RST_BUS_I2S1]		=  { 0x2d0, BIT(13) },
 	[RST_BUS_I2S2]		=  { 0x2d0, BIT(14) },
 
-	[RST_BUS_I2C0]		=  { 0x2d4, BIT(0) },
-	[RST_BUS_I2C1]		=  { 0x2d4, BIT(1) },
-	[RST_BUS_I2C2]		=  { 0x2d4, BIT(2) },
-	[RST_BUS_UART0]		=  { 0x2d4, BIT(16) },
-	[RST_BUS_UART1]		=  { 0x2d4, BIT(17) },
-	[RST_BUS_UART2]		=  { 0x2d4, BIT(18) },
-	[RST_BUS_UART3]		=  { 0x2d4, BIT(19) },
-	[RST_BUS_SCR]		=  { 0x2d4, BIT(20) },
+	[RST_BUS_I2C0]		=  { 0x2d8, BIT(0) },
+	[RST_BUS_I2C1]		=  { 0x2d8, BIT(1) },
+	[RST_BUS_I2C2]		=  { 0x2d8, BIT(2) },
+	[RST_BUS_UART0]		=  { 0x2d8, BIT(16) },
+	[RST_BUS_UART1]		=  { 0x2d8, BIT(17) },
+	[RST_BUS_UART2]		=  { 0x2d8, BIT(18) },
+	[RST_BUS_UART3]		=  { 0x2d8, BIT(19) },
+	[RST_BUS_SCR]		=  { 0x2d8, BIT(20) },
 };
 
 static const struct sunxi_ccu_desc sun8i_h3_ccu_desc = {

drivers/clk/sunxi-ng/ccu_nk.c

@@ -14,7 +14,7 @@
 #include "ccu_gate.h"
 #include "ccu_nk.h"
 
-void ccu_nk_find_best(unsigned long parent, unsigned long rate,
+static void ccu_nk_find_best(unsigned long parent, unsigned long rate,
 			     unsigned int max_n, unsigned int max_k,
 			     unsigned int *n, unsigned int *k)
 {

drivers/clk/sunxi/clk-a10-pll2.c

@@ -73,7 +73,7 @@ static void __init sun4i_pll2_setup(struct device_node *node,
 					  SUN4I_PLL2_PRE_DIV_WIDTH,
 					  CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
 					  &sun4i_a10_pll2_lock);
-	if (!prediv_clk) {
+	if (IS_ERR(prediv_clk)) {
 		pr_err("Couldn't register the prediv clock\n");
 		goto err_free_array;
 	}
@@ -106,7 +106,7 @@ static void __init sun4i_pll2_setup(struct device_node *node,
 					  &mult->hw, &clk_multiplier_ops,
 					  &gate->hw, &clk_gate_ops,
 					  CLK_SET_RATE_PARENT);
-	if (!base_clk) {
+	if (IS_ERR(base_clk)) {
 		pr_err("Couldn't register the base multiplier clock\n");
 		goto err_free_multiplier;
 	}

drivers/clk/sunxi/clk-sun8i-mbus.c

@@ -48,7 +48,7 @@ static void __init sun8i_a23_mbus_setup(struct device_node *node)
 		return;
 
 	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
-	if (!reg) {
+	if (IS_ERR(reg)) {
 		pr_err("Could not get registers for sun8i-mbus-clk\n");
 		goto err_free_parents;
 	}