Skip to content

L
linux
Commit e9148e42 authored by Randy Dunlap's avatar Randy Dunlap Committed by Linus Torvalds
Browse files
Options

[PATCH] replace URLs in Kconfig 

This is a patch from Robert P.J. Day that replaces www.linuxdoc.org
(which is outdated and unspported according to www.tldp.org)
with www.tldp.org in lots of Kconfig files.
parent 4d8b62e3
Expand all Show whitespace changes
Inline Side-by-side
Showing with 260 additions and 260 deletions
arch/alpha/Kconfig
View file @ e9148e42
......@@ -291,7 +291,7 @@ config PCI
VESA. If you have PCI, say Y, otherwise N.
The PCI-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>, contains valuable
<http://www.tldp.org/docs.html#howto>, contains valuable
information about which PCI hardware does work under Linux and which
doesn't.
......@@ -514,7 +514,7 @@ config SMP
See also the <file:Documentation/smp.tex>,
<file:Documentation/smp.txt>, <file:Documentation/i386/IO-APIC.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
If you don't know what to do here, say N.
......@@ -688,7 +688,7 @@ config BINFMT_ELF
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
......@@ -710,7 +710,7 @@ config BINFMT_MISC
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>). Once you have
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
......@@ -862,7 +862,7 @@ config CD_NO_IDESCSI
---help---
If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
here, otherwise N. Read the CD-ROM-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
......@@ -912,7 +912,7 @@ config SOUND
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
<http://www.tldp.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
......
arch/arm/Kconfig
View file @ e9148e42
......@@ -445,7 +445,7 @@ config PCI
VESA. If you have PCI, say Y, otherwise N.
The PCI-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>, contains valuable
<http://www.tldp.org/docs.html#howto>, contains valuable
information about which PCI hardware does work under Linux and which
doesn't.
......@@ -459,7 +459,7 @@ config PCI_INTEGRATOR
VESA. If you have PCI, say Y, otherwise N.
The PCI-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>, contains valuable
<http://www.tldp.org/docs.html#howto>, contains valuable
information about which PCI hardware does work under Linux and which
doesn't.
......@@ -717,7 +717,7 @@ config BINFMT_ELF
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
......@@ -739,7 +739,7 @@ config BINFMT_MISC
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>). Once you have
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
......@@ -770,7 +770,7 @@ config PM
page on the WWW at
<http://www.cs.utexas.edu/users/kharker/linux-laptop/> and the
Battery Powered Linux mini-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
Note that, even if you say N here, Linux on the x86 architecture
will issue the hlt instruction if nothing is to be done, thereby
......@@ -809,7 +809,7 @@ config APM
In order to use APM, you will need supporting software. For location
and more information, read <file:Documentation/pm.txt> and the
Battery Powered Linux mini-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
This driver does not spin down disk drives (see the hdparm(8)
manpage ("man 8 hdparm") for that), and it doesn't turn off
......@@ -1063,7 +1063,7 @@ config SOUND
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
<http://www.tldp.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
......
arch/cris/Kconfig
View file @ e9148e42
......@@ -40,7 +40,7 @@ config BINFMT_ELF
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
......@@ -615,7 +615,7 @@ config CD_NO_IDESCSI
---help---
If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
here, otherwise N. Read the CD-ROM-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
......@@ -667,7 +667,7 @@ config SOUND
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
<http://www.tldp.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
......
arch/cris/drivers/Kconfig
View file @ e9148e42
......@@ -30,7 +30,7 @@ config NET_ETHERNET
If your Linux machine will be connected to an Ethernet and you have
an Ethernet network interface card (NIC) installed in your computer,
say Y here and read the Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. You will then also have
<http://www.tldp.org/docs.html#howto>. You will then also have
to say Y to the driver for your particular NIC.
Note that the answer to this question won't directly affect the
......@@ -392,7 +392,7 @@ config PRINTER
box (as opposed to using a serial printer; if the connector at the
printer has 9 or 25 holes ["female"], then it's serial), say Y.
Also read the Printing-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
It is possible to share one parallel port among several devices
(e.g. printer and ZIP drive) and it is safe to compile the
......@@ -485,7 +485,7 @@ config BLK_DEV_IDE
topics, is contained in <file:Documentation/ide.txt>. For detailed
information about hard drives, consult the Disk-HOWTO and the
Multi-Disk-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
To fine-tune ATA/IDE drive/interface parameters for improved
performance, look for the hdparm package at
......
arch/h8300/Kconfig
View file @ e9148e42
......@@ -181,7 +181,7 @@ config NETDEVICES
telephone line with a modem either via UUCP (UUCP is a protocol to
forward mail and news between unix hosts over telephone lines; read
the UUCP-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
<http://www.tldp.org/docs.html#howto>) or dialing up a shell
account or a BBS, even using term (term is a program which gives you
almost full Internet connectivity if you have a regular dial up
shell account on some Internet connected Unix computer. Read
......@@ -201,7 +201,7 @@ config NETDEVICES
Make sure to read the NET-3-HOWTO. Eventually, you will have to read
Olaf Kirch's excellent and free book "Network Administrator's
Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
Guide", to be found in <http://www.tldp.org/docs.html#guide>. If
unsure, say Y.
endmenu
......
arch/i386/Kconfig
View file @ e9148e42
......@@ -409,7 +409,7 @@ config SMP
See also the <file:Documentation/smp.tex>,
<file:Documentation/smp.txt>, <file:Documentation/i386/IO-APIC.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
If you don't know what to do here, say N.
......@@ -790,7 +790,7 @@ config PM
page on the WWW at
<http://www.cs.utexas.edu/users/kharker/linux-laptop/> and the
Battery Powered Linux mini-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
Note that, even if you say N here, Linux on the x86 architecture
will issue the hlt instruction if nothing is to be done, thereby
......@@ -847,7 +847,7 @@ config APM
In order to use APM, you will need supporting software. For location
and more information, read <file:Documentation/pm.txt> and the
Battery Powered Linux mini-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
This driver does not spin down disk drives (see the hdparm(8)
manpage ("man 8 hdparm") for that), and it doesn't turn off
......@@ -1000,7 +1000,7 @@ config PCI
VESA. If you have PCI, say Y, otherwise N.
The PCI-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>, contains valuable
<http://www.tldp.org/docs.html#howto>, contains valuable
information about which PCI hardware does work under Linux and which
doesn't.
......@@ -1203,7 +1203,7 @@ config BINFMT_ELF
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
......@@ -1225,7 +1225,7 @@ config BINFMT_MISC
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>). Once you have
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
......@@ -1341,7 +1341,7 @@ config CD_NO_IDESCSI
---help---
If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
here, otherwise N. Read the CD-ROM-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
......@@ -1412,7 +1412,7 @@ config SOUND
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
<http://www.tldp.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
......
arch/ia64/Kconfig
View file @ e9148e42
......@@ -280,7 +280,7 @@ config PM
page on the WWW at
<http://www.cs.utexas.edu/users/kharker/linux-laptop/> and the
Battery Powered Linux mini-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
Note that, even if you say N here, Linux on the x86 architecture
will issue the hlt instruction if nothing is to be done, thereby
......@@ -425,7 +425,7 @@ config SMP
See also the <file:Documentation/smp.tex>,
<file:Documentation/smp.txt>, and the SMP-HOWTO available at
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
If you don't know what to do here, say N.
......@@ -497,7 +497,7 @@ config BINFMT_ELF
systems. Saying Y here will enable your kernel to run ELF binaries.
Information about ELF is contained in the ELF HOWTO available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
config BINFMT_MISC
tristate "Kernel support for MISC binaries"
......@@ -535,7 +535,7 @@ config PCI
VESA. If you have PCI, say Y, otherwise N.
The PCI-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>, contains valuable
<http://www.tldp.org/docs.html#howto>, contains valuable
information about which PCI hardware does work under Linux and which
doesn't.
......@@ -684,7 +684,7 @@ config CD_NO_IDESCSI
---help---
If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
here, otherwise N. Read the CD-ROM-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
......@@ -762,7 +762,7 @@ config SOUND
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
<http://www.tldp.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
......
arch/m68k/Kconfig
View file @ e9148e42
......@@ -65,7 +65,7 @@ config PCMCIA
To use your PC-cards, you will need supporting software from David
Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
for location). Please also read the PCMCIA-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
......@@ -106,7 +106,7 @@ config PCI
VESA. If you have PCI, say Y, otherwise N.
The PCI-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>, contains valuable
<http://www.tldp.org/docs.html#howto>, contains valuable
information about which PCI hardware does work under Linux and which
doesn't.
......@@ -413,7 +413,7 @@ config BINFMT_ELF
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
......@@ -435,7 +435,7 @@ config BINFMT_MISC
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>). Once you have
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
......@@ -592,7 +592,7 @@ config PRINTER
box (as opposed to using a serial printer; if the connector at the
printer has 9 or 25 holes ["female"], then it's serial), say Y.
Also read the Printing-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
It is possible to share one parallel port among several devices
(e.g. printer and ZIP drive) and it is safe to compile the
......@@ -741,7 +741,7 @@ config BLK_DEV_SD
If you want to use a SCSI hard disk or the SCSI or parallel port
version of the IOMEGA ZIP drive under Linux, say Y and read the
SCSI-HOWTO, the Disk-HOWTO and the Multi-Disk-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. This is NOT for SCSI
<http://www.tldp.org/docs.html#howto>. This is NOT for SCSI
CD-ROMs.
This driver is also available as a module ( = code which can be
......@@ -776,7 +776,7 @@ config CHR_DEV_ST
---help---
If you want to use a SCSI tape drive under Linux, say Y and read the
SCSI-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>, and
<http://www.tldp.org/docs.html#howto>, and
<file:Documentation/scsi/st.txt> in the kernel source. This is NOT for
SCSI CD-ROMs.
......@@ -809,7 +809,7 @@ config BLK_DEV_SR
---help---
If you want to use a SCSI CD-ROM under Linux, say Y and read the
SCSI-HOWTO and the CD-ROM-HOWTO at
<http://www.linuxdoc.org/docs.html#howto>. Also make sure to say Y
<http://www.tldp.org/docs.html#howto>. Also make sure to say Y
or M to "ISO 9660 CD-ROM file system support" later.
This driver is also available as a module ( = code which can be
......@@ -1084,7 +1084,7 @@ config MAC_SCSI
This is the NCR 5380 SCSI controller included on most of the 68030
based Macintoshes. If you have one of these say Y and read the
SCSI-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
config SCSI_MAC_ESP
tristate "Macintosh NCR53c9[46] SCSI"
......@@ -1093,7 +1093,7 @@ config SCSI_MAC_ESP
This is the NCR 53c9x SCSI controller found on most of the 68040
based Macintoshes. If you have one of these say Y and read the
SCSI-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
......@@ -1201,7 +1201,7 @@ config SERIAL_MANY_PORTS
Say Y here if you have dumb serial boards other than the four
standard COM 1/2/3/4 ports. This may happen if you have an AST
FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available
from <http://www.linuxdoc.org/docs.html#howto>), or other custom
from <http://www.tldp.org/docs.html#howto>), or other custom
serial port hardware which acts similar to standard serial port
hardware. If you only use the standard COM 1/2/3/4 ports, you can
say N here to save some memory. You can also say Y if you have an
......
arch/m68knommu/Kconfig
View file @ e9148e42
......@@ -563,7 +563,7 @@ config CD_NO_IDESCSI
---help---
If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
here, otherwise N. Read the CD-ROM-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
......@@ -635,7 +635,7 @@ config SOUND
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
<http://www.tldp.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
......
arch/mips/Kconfig
View file @ e9148e42
......@@ -35,7 +35,7 @@ config SMP
See also the <file:Documentation/smp.tex>,
<file:Documentation/smp.txt>, <file:Documentation/i386/IO-APIC.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
If you don't know what to do here, say N.
......@@ -363,7 +363,7 @@ config PCI
VESA. If you have PCI, say Y, otherwise N.
The PCI-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>, contains valuable
<http://www.tldp.org/docs.html#howto>, contains valuable
information about which PCI hardware does work under Linux and which
doesn't.
......@@ -740,7 +740,7 @@ config BINFMT_ELF
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
......@@ -762,7 +762,7 @@ config BINFMT_MISC
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>). Once you have
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
......@@ -931,7 +931,7 @@ config CD_NO_IDESCSI
---help---
If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
here, otherwise N. Read the CD-ROM-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
......@@ -1083,7 +1083,7 @@ config PSMOUSE
Although PS/2 mice are not technically bus mice, they are explained
in detail in the Busmouse-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
When using a PS/2 mouse, you can get problems if you want to use the
mouse both on the Linux console and under X. Using the "-R" option
......@@ -1102,7 +1102,7 @@ config MOUSE
MouseSystem or Microsoft mouse (made by Logitech) that plugs into a
COM port (rectangular with 9 or 25 pins). These people say N here.
If you have something else, read the Busmouse-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. This HOWTO contains
<http://www.tldp.org/docs.html#howto>. This HOWTO contains
information about all non-serial mice, not just bus mice.
If you have a laptop, you either have to check the documentation or
......@@ -1139,7 +1139,7 @@ config SOUND
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
<http://www.tldp.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
......
arch/mips64/Kconfig
View file @ e9148e42
......@@ -113,7 +113,7 @@ config SMP
See also the <file:Documentation/smp.tex>,
<file:Documentation/smp.txt>, <file:Documentation/i386/IO-APIC.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
If you don't know what to do here, say N.
......@@ -145,7 +145,7 @@ config PCI
VESA. If you have PCI, say Y, otherwise N.
The PCI-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>, contains valuable
<http://www.tldp.org/docs.html#howto>, contains valuable
information about which PCI hardware does work under Linux and which
doesn't.
......@@ -350,7 +350,7 @@ config BINFMT_ELF
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
......@@ -392,7 +392,7 @@ config BINFMT_MISC
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>). Once you have
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
......@@ -520,7 +520,7 @@ config CD_NO_IDESCSI
---help---
If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
here, otherwise N. Read the CD-ROM-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
......@@ -594,7 +594,7 @@ config SOUND
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
<http://www.tldp.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
......
arch/parisc/Kconfig
View file @ e9148e42
......@@ -136,7 +136,7 @@ config SMP
See also the <file:Documentation/smp.tex>,
<file:Documentation/smp.txt>, <file:Documentation/nmi_watchdog.txt>
and the SMP-HOWTO available at
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
If you don't know what to do here, say N.
......@@ -184,7 +184,7 @@ config BINFMT_ELF
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
......@@ -206,7 +206,7 @@ config BINFMT_MISC
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>). Once you have
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
......@@ -309,7 +309,7 @@ config SOUND
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
<http://www.tldp.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
......
arch/ppc/Kconfig
View file @ e9148e42
......@@ -808,7 +808,7 @@ config BINFMT_MISC
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>). Once you have
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
......@@ -1444,7 +1444,7 @@ config SOUND
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
<http://www.tldp.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
......
arch/ppc64/Kconfig
View file @ e9148e42
......@@ -195,7 +195,7 @@ config BINFMT_MISC
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>). Once you have
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
......@@ -387,7 +387,7 @@ config SOUND
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
<http://www.tldp.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
......
arch/s390/Kconfig
View file @ e9148e42
......@@ -60,7 +60,7 @@ config SMP
See also the <file:Documentation/smp.tex>,
<file:Documentation/smp.txt> and the SMP-HOWTO available at
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
Even if you don't know what to do here, say Y.
......@@ -226,7 +226,7 @@ config BINFMT_ELF
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
......@@ -248,7 +248,7 @@ config BINFMT_MISC
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>). Once you have
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
......
arch/sh/Kconfig
View file @ e9148e42
......@@ -483,7 +483,7 @@ config PCI
VESA. If you have PCI, say Y, otherwise N.
The PCI-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>, contains valuable
<http://www.tldp.org/docs.html#howto>, contains valuable
information about which PCI hardware does work under Linux and which
doesn't.
......@@ -608,7 +608,7 @@ config BINFMT_ELF
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
......@@ -630,7 +630,7 @@ config BINFMT_MISC
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>). Once you have
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
......@@ -748,7 +748,7 @@ config CD_NO_IDESCSI
---help---
If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
here, otherwise N. Read the CD-ROM-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
......@@ -980,7 +980,7 @@ config PRINTER
box (as opposed to using a serial printer; if the connector at the
printer has 9 or 25 holes ["female"], then it's serial), say Y.
Also read the Printing-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
It is possible to share one parallel port among several devices
(e.g. printer and ZIP drive) and it is safe to compile the
......@@ -1049,7 +1049,7 @@ config PSMOUSE
Although PS/2 mice are not technically bus mice, they are explained
in detail in the Busmouse-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
When using a PS/2 mouse, you can get problems if you want to use the
mouse both on the Linux console and under X. Using the "-R" option
......@@ -1157,7 +1157,7 @@ config SOUND
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
<http://www.tldp.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
......
arch/sparc/Kconfig
View file @ e9148e42
......@@ -106,7 +106,7 @@ config SMP
See also the <file:Documentation/smp.tex>,
<file:Documentation/smp.txt>, <file:Documentation/i386/IO-APIC.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
If you don't know what to do here, say N.
......@@ -160,7 +160,7 @@ config PCMCIA
To use your PC-cards, you will need supporting software from David
Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
for location). Please also read the PCMCIA-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
......@@ -314,7 +314,7 @@ config BINFMT_ELF
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
......@@ -336,7 +336,7 @@ config BINFMT_MISC
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>). Once you have
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
......@@ -372,7 +372,7 @@ config PRINTER
box (as opposed to using a serial printer; if the connector at the
printer has 9 or 25 holes ["female"], then it's serial), say Y.
Also read the Printing-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
It is possible to share one parallel port among several devices
(e.g. printer and ZIP drive) and it is safe to compile the
......@@ -636,7 +636,7 @@ config BLK_DEV_SD
If you want to use a SCSI hard disk or the SCSI or parallel port
version of the IOMEGA ZIP drive under Linux, say Y and read the
SCSI-HOWTO, the Disk-HOWTO and the Multi-Disk-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. This is NOT for SCSI
<http://www.tldp.org/docs.html#howto>. This is NOT for SCSI
CD-ROMs.
This driver is also available as a module ( = code which can be
......@@ -671,7 +671,7 @@ config CHR_DEV_ST
---help---
If you want to use a SCSI tape drive under Linux, say Y and read the
SCSI-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>, and
<http://www.tldp.org/docs.html#howto>, and
<file:Documentation/scsi/st.txt> in the kernel source. This is NOT
for SCSI CD-ROMs.
......@@ -693,7 +693,7 @@ config CHR_DEV_OSST
tape drives (ADR-x0) that supports the standard SCSI-2 commands for
tapes (QIC-157) and can be driven by the standard driver st.
For more information, you may have a look at the SCSI-HOWTO
<http://www.linuxdoc.org/docs.html#howto> and
<http://www.tldp.org/docs.html#howto> and
<file:Documentation/scsi/osst.txt> in the kernel source.
More info on the OnStream driver may be found on
<http://linux1.onstream.nl/test/>
......@@ -712,7 +712,7 @@ config BLK_DEV_SR
---help---
If you want to use a SCSI CD-ROM under Linux, say Y and read the
SCSI-HOWTO and the CD-ROM-HOWTO at
<http://www.linuxdoc.org/docs.html#howto>. Also make sure to say Y
<http://www.tldp.org/docs.html#howto>. Also make sure to say Y
or M to "ISO 9660 CD-ROM file system support" later.
This driver is also available as a module ( = code which can be
......@@ -925,7 +925,7 @@ config SOUND
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
<http://www.tldp.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
......
arch/sparc64/Kconfig
View file @ e9148e42
......@@ -114,7 +114,7 @@ config SMP
See also the <file:Documentation/smp.tex>,
<file:Documentation/smp.txt>, <file:Documentation/i386/IO-APIC.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
If you don't know what to do here, say N.
......@@ -281,7 +281,7 @@ config PCMCIA
To use your PC-cards, you will need supporting software from David
Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
for location). Please also read the PCMCIA-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
......@@ -314,7 +314,7 @@ config PCI
VESA. If you have PCI, say Y, otherwise N.
The PCI-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>, contains valuable
<http://www.tldp.org/docs.html#howto>, contains valuable
information about which PCI hardware does work under Linux and which
doesn't.
......@@ -426,7 +426,7 @@ config BINFMT_ELF
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
......@@ -448,7 +448,7 @@ config BINFMT_MISC
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>). Once you have
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
......@@ -496,7 +496,7 @@ config PRINTER
box (as opposed to using a serial printer; if the connector at the
printer has 9 or 25 holes ["female"], then it's serial), say Y.
Also read the Printing-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
It is possible to share one parallel port among several devices
(e.g. printer and ZIP drive) and it is safe to compile the
......@@ -804,7 +804,7 @@ config BLK_DEV_SD
If you want to use a SCSI hard disk or the SCSI or parallel port
version of the IOMEGA ZIP drive under Linux, say Y and read the
SCSI-HOWTO, the Disk-HOWTO and the Multi-Disk-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. This is NOT for SCSI
<http://www.tldp.org/docs.html#howto>. This is NOT for SCSI
CD-ROMs.
This driver is also available as a module ( = code which can be
......@@ -839,7 +839,7 @@ config CHR_DEV_ST
---help---
If you want to use a SCSI tape drive under Linux, say Y and read the
SCSI-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>, and
<http://www.tldp.org/docs.html#howto>, and
<file:Documentation/scsi/st.txt> in the kernel source. This is NOT
for SCSI CD-ROMs.
......@@ -861,7 +861,7 @@ config CHR_DEV_OSST
tape drives (ADR-x0) that supports the standard SCSI-2 commands for
tapes (QIC-157) and can be driven by the standard driver st.
For more information, you may have a look at the SCSI-HOWTO
<http://www.linuxdoc.org/docs.html#howto> and
<http://www.tldp.org/docs.html#howto> and
<file:Documentation/scsi/osst.txt> in the kernel source.
More info on the OnStream driver may be found on
<http://linux1.onstream.nl/test/>
......@@ -880,7 +880,7 @@ config BLK_DEV_SR
---help---
If you want to use a SCSI CD-ROM under Linux, say Y and read the
SCSI-HOWTO and the CD-ROM-HOWTO at
<http://www.linuxdoc.org/docs.html#howto>. Also make sure to say Y
<http://www.tldp.org/docs.html#howto>. Also make sure to say Y
or M to "ISO 9660 CD-ROM file system support" later.
This driver is also available as a module ( = code which can be
......@@ -1060,7 +1060,7 @@ config SCSI_AIC7XXX_OLD
configuration options. You should read
<file:Documentation/scsi/aic7xxx_old.txt> at a minimum before
contacting the maintainer with any questions. The SCSI-HOWTO,
available from <http://www.linuxdoc.org/docs.html#howto>, can also
available from <http://www.tldp.org/docs.html#howto>, can also
be of great help.
If you want to compile this driver as a module ( = code which can be
......@@ -1406,7 +1406,7 @@ config SCSI_QLOGIC_ISP
Please read the file <file:Documentation/scsi/qlogicisp.txt>. You
should also read the SCSI-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
......@@ -1586,7 +1586,7 @@ config SOUND
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
<http://www.tldp.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
......
arch/v850/Kconfig
View file @ e9148e42
......@@ -341,7 +341,7 @@ config SOUND
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
<http://www.tldp.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
......
drivers/char/Kconfig
View file @ e9148e42
......@@ -487,7 +487,7 @@ config PRINTER
box (as opposed to using a serial printer; if the connector at the
printer has 9 or 25 holes ["female"], then it's serial), say Y.
Also read the Printing-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
It is possible to share one parallel port among several devices
(e.g. printer and ZIP drive) and it is safe to compile the
......
drivers/ide/Kconfig
View file @ e9148e42
......@@ -22,7 +22,7 @@ config BLK_DEV_IDE
topics, is contained in <file:Documentation/ide.txt>. For detailed
information about hard drives, consult the Disk-HOWTO and the
Multi-Disk-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
To fine-tune ATA/IDE drive/interface parameters for improved
performance, look for the hdparm package at
......@@ -1017,7 +1017,7 @@ config BLK_DEV_HD_ONLY
If you are unsure, then just choose the Enhanced IDE/MFM/RLL driver
instead of this one. For more detailed information, read the
Disk-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
config IDEDMA_AUTO
bool
......
drivers/md/Kconfig
View file @ e9148e42
......@@ -25,7 +25,7 @@ config BLK_DEV_MD
More information about Software RAID on Linux is contained in the
Software RAID mini-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. There you will also learn
<http://www.tldp.org/docs.html#howto>. There you will also learn
where to get the supporting user space utilities raidtools.
If unsure, say N.
......@@ -57,7 +57,7 @@ config MD_RAID0
Information about Software RAID on Linux is contained in the
Software-RAID mini-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. There you will also
<http://www.tldp.org/docs.html#howto>. There you will also
learn where to get the supporting user space utilities raidtools.
If you want to compile this as a module ( = code which can be
......@@ -81,7 +81,7 @@ config MD_RAID1
Information about Software RAID on Linux is contained in the
Software-RAID mini-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. There you will also
<http://www.tldp.org/docs.html#howto>. There you will also
learn where to get the supporting user space utilities raidtools.
If you want to use such a RAID-1 set, say Y. This code is also
......@@ -106,7 +106,7 @@ config MD_RAID5
Information about Software RAID on Linux is contained in the
Software-RAID mini-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. There you will also
<http://www.tldp.org/docs.html#howto>. There you will also
learn where to get the supporting user space utilities raidtools.
If you want to use such a RAID-4/RAID-5 set, say Y. This code is
......
drivers/net/Kconfig
View file @ e9148e42
This diff is collapsed.
drivers/net/arcnet/Kconfig
View file @ e9148e42
......@@ -18,7 +18,7 @@ config ARCNET
support" below.
You might also want to have a look at the Ethernet-HOWTO, available
from <http://www.linuxdoc.org/docs.html#howto>(even though ARCnet
from <http://www.tldp.org/docs.html#howto>(even though ARCnet
is not really Ethernet).
This driver is also available as a module ( = code which can be
......
drivers/net/hamradio/Kconfig
View file @ e9148e42
......@@ -60,7 +60,7 @@ config DMASCC
Currently, this driver supports Ottawa PI/PI2, Paccomm/Gracilis
PackeTwin, and S5SCC/DMA boards. They are detected automatically.
If you have one of these cards, say Y here and read the AX25-HOWTO,
available from <http://www.linuxdoc.org/docs.html#howto>.
available from <http://www.tldp.org/docs.html#howto>.
This driver can operate multiple boards simultaneously. If you
compile it as a module (by saying M instead of Y), it will be called
......@@ -88,7 +88,7 @@ config SCC
in order to communicate with other computers. If you want to use
this, read <file:Documentation/networking/z8530drv.txt> and the
AX25-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. Also make sure to say Y
<http://www.tldp.org/docs.html#howto>. Also make sure to say Y
to "Amateur Radio AX.25 Level 2" support.
If you want to compile this as a module ( = code which can be
......
drivers/net/pcmcia/Kconfig
View file @ e9148e42
......@@ -17,7 +17,7 @@ config NET_PCMCIA
To use your PC-cards, you will need supporting software from David
Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
for location). You also want to check out the PCMCIA-HOWTO,
available from <http://www.linuxdoc.org/docs.html#howto>.
available from <http://www.tldp.org/docs.html#howto>.
If unsure, say N.
......
drivers/net/tokenring/Kconfig
View file @ e9148e42
......@@ -16,7 +16,7 @@ config TR
connected to such a Token Ring network and want to use your Token
Ring card under Linux, say Y here and to the driver for your
particular card below and read the Token-Ring mini-HOWTO, available
from <http://www.linuxdoc.org/docs.html#howto>. Most people can
from <http://www.tldp.org/docs.html#howto>. Most people can
say N here.
config IBMTR
......@@ -25,7 +25,7 @@ config IBMTR
---help---
This is support for all IBM Token Ring cards that don't use DMA. If
you have such a beast, say Y and read the Token-Ring mini-HOWTO,
available from <http://www.linuxdoc.org/docs.html#howto>.
available from <http://www.tldp.org/docs.html#howto>.
Warning: this driver will almost definitely fail if more than one
active Token Ring card is present.
......@@ -44,7 +44,7 @@ config IBMOL
Wake On Lan, and PCI 100/16/4 adapters.
If you have such an adapter, say Y and read the Token-Ring
mini-HOWTO, available from <http://www.linuxdoc.org/docs.html#howto>.
mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
......@@ -62,7 +62,7 @@ config IBMLS
This is support for IBM Lanstreamer PCI Token Ring Cards.
If you have such an adapter, say Y and read the Token-Ring
mini-HOWTO, available from <http://www.linuxdoc.org/docs.html#howto>.
mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>.
This driver is also available as a modules ( = code which can be
inserted in and removed from the running kernel whenever you want).
......@@ -78,7 +78,7 @@ config 3C359
should use the tms380 driver instead.
If you have such an adapter, say Y and read the Token-Ring
mini-HOWTO, available from <http://www.linuxdoc.org/docs.html#howto>.
mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
......@@ -104,7 +104,7 @@ config TMS380TR
If you have such an adapter and would like to use it, say Y and
read the Token-Ring mini-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
Also read the file <file:Documentation/networking/tms380tr.txt> or
check <http://www.auk.cx/tms380tr/>.
......@@ -194,7 +194,7 @@ config SMCTR
If you have such an adapter and would like to use it, say Y or M and
read the Token-Ring mini-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto> and the file
<http://www.tldp.org/docs.html#howto> and the file
<file:Documentation/networking/smctr.txt>.
This driver is also available as a module ( = code which can be
......
drivers/net/tulip/Kconfig
View file @ e9148e42
......@@ -21,7 +21,7 @@ config DE2104X
(smc9332dst), you can also try the driver for "Generic DECchip"
cards, above. However, most people with a network card of this type
will say Y here.) Do read the Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. More specific
<http://www.tldp.org/docs.html#howto>. More specific
information is contained in
<file:Documentation/DocBook/tulip-user.tmpl>.
......@@ -42,7 +42,7 @@ config TULIP
(smc9332dst), you can also try the driver for "Generic DECchip"
cards, above. However, most people with a network card of this type
will say Y here.) Do read the Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. More specific
<http://www.tldp.org/docs.html#howto>. More specific
information is contained in
<file:Documentation/networking/tulip.txt>.
......@@ -80,7 +80,7 @@ config DE4X5
These include the DE425, DE434, DE435, DE450 and DE500 models. If
you have a network card of this type, say Y and read the
Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. More specific
<http://www.tldp.org/docs.html#howto>. More specific
information is contained in
<file:Documentation/networking/de4x5.txt>.
......
drivers/net/wireless/Kconfig
View file @ e9148e42
......@@ -88,7 +88,7 @@ config WAVELAN
If you want to use an ISA WaveLAN card under Linux, say Y and read
the Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. Some more specific
<http://www.tldp.org/docs.html#howto>. Some more specific
information is contained in
<file:Documentation/networking/wavelan.txt> and in the source code
<file:drivers/net/wavelan.p.h>.
......@@ -240,7 +240,7 @@ config PCMCIA_HERMES
To use your PC-cards, you will need supporting software from David
Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
for location). You also want to check out the PCMCIA-HOWTO,
available from <http://www.linuxdoc.org/docs.html#howto>.
available from <http://www.tldp.org/docs.html#howto>.
You will also very likely also need the Wireless Tools in order to
configure your card and that /etc/pcmcia/wireless.opts works:
......@@ -266,7 +266,7 @@ config AIRO_CS
To use your PC-cards, you will need supporting software from David
Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
for location). You also want to check out the PCMCIA-HOWTO,
available from <http://www.linuxdoc.org/docs.html#howto>.
available from <http://www.tldp.org/docs.html#howto>.
# yes, this works even when no drivers are selected
config NET_WIRELESS
......
drivers/pcmcia/Kconfig
View file @ e9148e42
......@@ -21,7 +21,7 @@ config PCMCIA
To use your PC-cards, you will need supporting software from David
Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
for location). Please also read the PCMCIA-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
......
drivers/scsi/Kconfig
View file @ e9148e42
This diff is collapsed.
drivers/serial/Kconfig
View file @ e9148e42
......@@ -97,7 +97,7 @@ config SERIAL_8250_MANY_PORTS
Say Y here if you have dumb serial boards other than the four
standard COM 1/2/3/4 ports. This may happen if you have an AST
FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available
from <http://www.linuxdoc.org/docs.html#howto>), or other custom
from <http://www.tldp.org/docs.html#howto>), or other custom
serial port hardware which acts similar to standard serial port
hardware. If you only use the standard COM 1/2/3/4 ports, you can
say N here to save some memory. You can also say Y if you have an
......
fs/Kconfig
View file @ e9148e42
......@@ -26,7 +26,7 @@ config EXT2_FS
by about 44 KB.
The Ext2fs-Undeletion mini-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>, gives information about
<http://www.tldp.org/docs.html#howto>, gives information about
how to retrieve deleted files on ext2fs file systems.
To change the behavior of ext2 file systems, you can use the tune2fs
......@@ -386,7 +386,7 @@ config QUOTA
in order to use quota support (you can download sources from
<http://www.sf.net/projects/linuxquota/>). For further details, read
the Quota mini-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. Probably the quota
<http://www.tldp.org/docs.html#howto>. Probably the quota
support is only useful for multi user systems. If unsure, say N.
config QFMT_V1
......@@ -469,7 +469,7 @@ config ISO9660_FS
driver. If you have a CD-ROM drive and want to do more with it than
just listen to audio CDs and watch its LEDs, say Y (and read
<file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO,
available from <http://www.linuxdoc.org/docs.html#howto>), thereby
available from <http://www.tldp.org/docs.html#howto>), thereby
enlarging your kernel by about 27 KB; otherwise say N.
If you want to compile this as a module ( = code which can be
......@@ -576,7 +576,7 @@ config MSDOS_FS
they are compressed; to access compressed MSDOS partitions under
Linux, you can either use the DOS emulator DOSEMU, described in the
DOSEMU-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>, or try dmsdosfs in
<http://www.tldp.org/docs.html#howto>, or try dmsdosfs in
<ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
intend to use dosemu with a non-compressed MSDOS partition, say Y
here) and MSDOS floppies. This means that file access becomes
......@@ -1233,7 +1233,7 @@ config NFS_FS
programs nfsd and mountd (but does not need to have NFS file system
support enabled in its kernel). NFS is explained in the Network
Administrator's Guide, available from
<http://www.linuxdoc.org/docs.html#guide>, on its man page: "man
<http://www.tldp.org/docs.html#guide>, on its man page: "man
nfs", and in the NFS-HOWTO.
A superior but less widely used alternative to NFS is provided by
......@@ -1298,7 +1298,7 @@ config NFSD
as well.
Please read the NFS-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
The NFS server is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
......@@ -1398,7 +1398,7 @@ config SMB_FS
works only if the Windows machines use TCP/IP as the underlying
transport protocol, and not NetBEUI. For details, read
<file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO,
available from <http://www.linuxdoc.org/docs.html#howto>.
available from <http://www.tldp.org/docs.html#howto>.
Note: if you just want your box to act as an SMB *server* and make
files and printing services available to Windows clients (which need
......@@ -1475,7 +1475,7 @@ config NCP_FS
to mount NetWare file server volumes and to access them just like
any other Unix directory. For details, please read the file
<file:Documentation/filesystems/ncpfs.txt> in the kernel source and
the IPX-HOWTO from <http://www.linuxdoc.org/docs.html#howto>.
the IPX-HOWTO from <http://www.tldp.org/docs.html#howto>.
You do not have to say Y here if you want your Linux box to act as a
file *server* for Novell NetWare clients.
......
init/Kconfig
View file @ e9148e42
......@@ -56,12 +56,12 @@ config SYSVIPC
and some programs won't run unless you say Y here. In particular, if
you want to run the DOS emulator dosemu under Linux (read the
DOSEMU-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>), you'll need to say Y
<http://www.tldp.org/docs.html#howto>), you'll need to say Y
here.
You can find documentation about IPC with "info ipc" and also in
section 6.4 of the Linux Programmer's Guide, available from
<http://www.linuxdoc.org/docs.html#guide>.
<http://www.tldp.org/docs.html#guide>.
config BSD_PROCESS_ACCT
bool "BSD Process Accounting"
......
net/Kconfig
View file @ e9148e42
......@@ -18,7 +18,7 @@ config NET
For a general introduction to Linux networking, it is highly
recommended to read the NET-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
menu "Networking options"
depends on NET
......@@ -162,7 +162,7 @@ config INET
For an excellent introduction to Linux networking, please read the
NET-3-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
This option is also necessary if you want to use the full power of
term (term is a program which gives you almost full Internet
......@@ -294,7 +294,7 @@ config IPX
Novell client ncpfs (available from
<ftp://platan.vc.cvut.cz/pub/linux/ncpfs/>) or from
within the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO,
available from <http://www.linuxdoc.org/docs.html#howto>). In order
available from <http://www.tldp.org/docs.html#howto>). In order
to do the former, you'll also have to say Y to "NCP file system
support", below.
......@@ -307,7 +307,7 @@ config IPX
<ftp://ibiblio.org/pub/Linux/system/network/daemons/> or
mars_nwe from <ftp://www.compu-art.de/mars_nwe/>. For more
information, read the IPX-HOWTO available from
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
General information about how to connect Linux, Windows machines and
Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
......@@ -339,7 +339,7 @@ config ATALK
General information about how to connect Linux, Windows machines and
Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>. The
NET-3-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>, contains valuable
<http://www.tldp.org/docs.html#howto>, contains valuable
information as well.
This driver is also available as a module ( = code which can be
......
net/ax25/Kconfig
View file @ e9148e42
......@@ -13,7 +13,7 @@ config HAMRADIO
help
If you want to connect your Linux box to an amateur radio, answer Y
here. You want to read <http://www.tapr.org/tapr/html/pkthome.html> and
the AX25-HOWTO, available from <http://www.linuxdoc.org/docs.html#howto>.
the AX25-HOWTO, available from <http://www.tldp.org/docs.html#howto>.
Note that the answer to this question won't directly affect the
kernel: saying N will just cause the configurator to skip all
......@@ -42,7 +42,7 @@ config AX25
Information about where to get supporting software for Linux amateur
radio as well as information about how to configure an AX.25 port is
contained in the AX25-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. You might also want to
<http://www.tldp.org/docs.html#howto>. You might also want to
check out the file <file:Documentation/networking/ax25.txt> in the
kernel source. More information about digital amateur radio in
general is on the WWW at
......@@ -76,7 +76,7 @@ config NETROM
A comprehensive listing of all the software for Linux amateur radio
users as well as information about how to configure an AX.25 port is
contained in the AX25-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. You also might want to
<http://www.tldp.org/docs.html#howto>. You also might want to
check out the file <file:Documentation/networking/ax25.txt>. More
information about digital amateur radio in general is on the WWW at
<http://www.tapr.org/tapr/html/pkthome.html>.
......@@ -97,7 +97,7 @@ config ROSE
A comprehensive listing of all the software for Linux amateur radio
users as well as information about how to configure an AX.25 port is
contained in the AX25-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. You also might want to
<http://www.tldp.org/docs.html#howto>. You also might want to
check out the file <file:Documentation/networking/ax25.txt>. More
information about digital amateur radio in general is on the WWW at
<http://www.tapr.org/tapr/html/pkthome.html>.
......
net/ipx/Kconfig
View file @ e9148e42
......@@ -12,7 +12,7 @@ config IPX_INTERN
same address). The way this is done is to create a virtual internal
"network" inside your box and to assign an IPX address to this
network. Say Y here if you want to do this; read the IPX-HOWTO at
<http://www.linuxdoc.org/docs.html#howto> for details.
<http://www.tldp.org/docs.html#howto> for details.
The full internal IPX network enables you to allocate sockets on
different virtual nodes of the internal network. This is done by
......
net/irda/Kconfig
View file @ e9148e42
......@@ -16,7 +16,7 @@ config IRDA
some user-space utilities like irattach. For more information, see
the file <file:Documentation/networking/irda.txt>. You also want to
read the IR-HOWTO, available at
<http://www.linuxdoc.org/docs.html#howto>.
<http://www.tldp.org/docs.html#howto>.
If you want to exchange bits of data (vCal, vCard) with a PDA, you
will need to install some OBEX application, such as OpenObex :
......
sound/oss/Kconfig
View file @ e9148e42
......@@ -872,7 +872,7 @@ config SOUND_AWE32_SYNTH
Say Y here if you have a Sound Blaster SB32, AWE32-PnP, SB AWE64 or
similar sound card. See <file:Documentation/sound/oss/README.awe>,
<file:Documentation/sound/oss/AWE32> and the Soundblaster-AWE
mini-HOWTO, available from <http://www.linuxdoc.org/docs.html#howto>
mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
for more info.
config SOUND_WAVEFRONT
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7