thermal: armada: Remove support for A375-Z1 SoC

The Armada 375 Z1 SoC revision is no longer supported. This commit
removes the quirk needed for the thermal sensor.
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Documentation/devicetree/bindings/thermal/armada-thermal.txt

@@ -5,17 +5,9 @@ Required properties:
 - compatible:	Should be set to one of the following:
 		marvell,armada370-thermal
 		marvell,armada375-thermal
-		marvell,armada375-z1-thermal
 		marvell,armada380-thermal
 		marvell,armadaxp-thermal
 
-		Note: As the name suggests, "marvell,armada375-z1-thermal"
-		applies for the SoC Z1 stepping only. On such stepping
-		some quirks need to be done and the register offset differs
-		from the one in the A0 stepping.
-		The operating system may auto-detect the SoC stepping and
-		update the compatible and register offsets at runtime.
-
 - reg:		Device's register space.
 		Two entries are expected, see the examples below.
 		The first one is required for the sensor register;

drivers/thermal/armada_thermal.c

@@ -35,10 +35,6 @@
 #define PMU_TDC0_OTF_CAL_MASK		(0x1 << 30)
 #define PMU_TDC0_START_CAL_MASK		(0x1 << 25)
 
-#define A375_Z1_CAL_RESET_LSB		0x8011e214
-#define A375_Z1_CAL_RESET_MSB		0x30a88019
-#define A375_Z1_WORKAROUND_BIT		BIT(9)
-
 #define A375_UNIT_CONTROL_SHIFT		27
 #define A375_UNIT_CONTROL_MASK		0x7
 #define A375_READOUT_INVERT		BIT(15)
@@ -124,24 +120,12 @@ static void armada375_init_sensor(struct platform_device *pdev,
 				  struct armada_thermal_priv *priv)
 {
 	unsigned long reg;
-	bool quirk_needed =
-		!!of_device_is_compatible(pdev->dev.of_node,
-					  "marvell,armada375-z1-thermal");
-
-	if (quirk_needed) {
-		/* Ensure these registers have the default (reset) values */
-		writel(A375_Z1_CAL_RESET_LSB, priv->control);
-		writel(A375_Z1_CAL_RESET_MSB, priv->control + 0x4);
-	}
 
 	reg = readl(priv->control + 4);
 	reg &= ~(A375_UNIT_CONTROL_MASK << A375_UNIT_CONTROL_SHIFT);
 	reg &= ~A375_READOUT_INVERT;
 	reg &= ~A375_HW_RESETn;
 
-	if (quirk_needed)
-		reg |= A375_Z1_WORKAROUND_BIT;
-
 	writel(reg, priv->control + 4);
 	mdelay(20);
 
@@ -259,10 +243,6 @@ static const struct of_device_id armada_thermal_id_table[] = {
 		.compatible = "marvell,armada375-thermal",
 		.data       = &armada375_data,
 	},
-	{
-		.compatible = "marvell,armada375-z1-thermal",
-		.data       = &armada375_data,
-	},
 	{
 		.compatible = "marvell,armada380-thermal",
 		.data       = &armada380_data,