ASoC: wm8741: Set OSR mode in hw_params()

For correct operation of the digital filtering and other processing on the
WM8741, the user must ensure the correct value of OSR[1:0] is set at all
times.[1] Hence, depending the selected sampling rate, set the OSR (over-
sampling rate) mode in hw_params().

References:
	[1] "WM8741 Data Sheet"
Signed-off-by: Sergej Sawazki <sergej@taudac.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/codecs/wm8741.c

@@ -196,7 +196,7 @@ static int wm8741_hw_params(struct snd_pcm_substream *substream,
 {
 	struct snd_soc_component *component = dai->component;
 	struct wm8741_priv *wm8741 = snd_soc_component_get_drvdata(component);
-	unsigned int iface;
+	unsigned int iface, mode;
 	int i;
 
 	/* The set of sample rates that can be supported depends on the
@@ -240,11 +240,21 @@ static int wm8741_hw_params(struct snd_pcm_substream *substream,
 		return -EINVAL;
 	}
 
+	/* oversampling rate */
+	if (params_rate(params) > 96000)
+		mode = 0x40;
+	else if (params_rate(params) > 48000)
+		mode = 0x20;
+	else
+		mode = 0x00;
+
 	dev_dbg(component->dev, "wm8741_hw_params:    bit size param = %d, rate param = %d",
 		params_width(params), params_rate(params));
 
 	snd_soc_component_update_bits(component, WM8741_FORMAT_CONTROL, WM8741_IWL_MASK,
 			    iface);
+	snd_soc_component_update_bits(component, WM8741_MODE_CONTROL_1, WM8741_OSR_MASK,
+			    mode);
 
 	return 0;
 }