Merge git://git.infradead.org/battery-2.6

* git://git.infradead.org/battery-2.6:
  PXA: Use dev_pm_ops in z2_battery
  ds2760_battery: Fix rated capacity of the hx4700 1800mAh battery
  ds2760_battery: Fix indexing of the 4 active full EEPROM registers
  power: Make test_power driver more dynamic.
  bq27x00_battery: Name of cycle count property
  max8903_charger: Add GENERIC_HARDIRQS as a dependency (fixes S390 build)
  ARM: RX-51: Enable isp1704 power on/off
  isp1704_charger: Allow board specific powering routine
  gpio-charger: Add gpio_charger_resume
  power_supply: Add driver for MAX8903 charger

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -23,6 +23,7 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/mmc/host.h>
+#include <linux/power/isp1704_charger.h>
 
 #include <plat/mcspi.h>
 #include <plat/board.h>
@@ -53,6 +54,8 @@
 #define RX51_FMTX_RESET_GPIO		163
 #define RX51_FMTX_IRQ			53
 
+#define RX51_USB_TRANSCEIVER_RST_GPIO	67
+
 /* list all spi devices here */
 enum {
 	RX51_SPI_WL1251,
@@ -111,10 +114,30 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
 	},
 };
 
+static void rx51_charger_set_power(bool on)
+{
+	gpio_set_value(RX51_USB_TRANSCEIVER_RST_GPIO, on);
+}
+
+static struct isp1704_charger_data rx51_charger_data = {
+	.set_power	= rx51_charger_set_power,
+};
+
 static struct platform_device rx51_charger_device = {
-	.name = "isp1704_charger",
+	.name	= "isp1704_charger",
+	.dev	= {
+		.platform_data = &rx51_charger_data,
+	},
 };
 
+static void __init rx51_charger_init(void)
+{
+	WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO,
+		GPIOF_OUT_INIT_LOW, "isp1704_reset"));
+
+	platform_device_register(&rx51_charger_device);
+}
+
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 
 #define RX51_GPIO_CAMERA_LENS_COVER	110
@@ -961,6 +984,6 @@ void __init rx51_peripherals_init(void)
 	if (partition)
 		omap2_hsmmc_init(mmc);
 
-	platform_device_register(&rx51_charger_device);
+	rx51_charger_init();
 }
 

drivers/power/Kconfig

@@ -210,6 +210,15 @@ config CHARGER_ISP1704
 	  Say Y to enable support for USB Charger Detection with
 	  ISP1707/ISP1704 USB transceivers.
 
+config CHARGER_MAX8903
+	tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
+	depends on GENERIC_HARDIRQS
+	help
+	  Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
+	  The driver supports controlling charger-enable and current-limit
+	  pins based on the status of charger connections with interrupt
+	  handlers.
+
 config CHARGER_TWL4030
 	tristate "OMAP TWL4030 BCI charger driver"
 	depends on TWL4030_CORE

drivers/power/Makefile

@@ -33,5 +33,6 @@ obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
 obj-$(CONFIG_BATTERY_JZ4740)	+= jz4740-battery.o
 obj-$(CONFIG_BATTERY_INTEL_MID)	+= intel_mid_battery.o
 obj-$(CONFIG_CHARGER_ISP1704)	+= isp1704_charger.o
+obj-$(CONFIG_CHARGER_MAX8903)	+= max8903_charger.o
 obj-$(CONFIG_CHARGER_TWL4030)	+= twl4030_charger.o
 obj-$(CONFIG_CHARGER_GPIO)	+= gpio-charger.o

drivers/power/bq27x00_battery.c

@@ -4,6 +4,7 @@
  * Copyright (C) 2008 Rodolfo Giometti <giometti@linux.it>
  * Copyright (C) 2008 Eurotech S.p.A. <info@eurotech.it>
  * Copyright (C) 2010-2011 Lars-Peter Clausen <lars@metafoo.de>
+ * Copyright (C) 2011 Pali Rohár <pali.rohar@gmail.com>
  *
  * Based on a previous work by Copyright (C) 2008 Texas Instruments, Inc.
  *
@@ -76,7 +77,7 @@ struct bq27x00_reg_cache {
 	int time_to_empty_avg;
 	int time_to_full;
 	int charge_full;
-	int charge_counter;
+	int cycle_count;
 	int capacity;
 	int flags;
 
@@ -115,7 +116,7 @@ static enum power_supply_property bq27x00_battery_props[] = {
 	POWER_SUPPLY_PROP_CHARGE_FULL,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
 	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
-	POWER_SUPPLY_PROP_CHARGE_COUNTER,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
 	POWER_SUPPLY_PROP_ENERGY_NOW,
 };
 
@@ -267,7 +268,7 @@ static void bq27x00_update(struct bq27x00_device_info *di)
 		cache.time_to_empty_avg = bq27x00_battery_read_time(di, BQ27x00_REG_TTECP);
 		cache.time_to_full = bq27x00_battery_read_time(di, BQ27x00_REG_TTF);
 		cache.charge_full = bq27x00_battery_read_lmd(di);
-		cache.charge_counter = bq27x00_battery_read_cyct(di);
+		cache.cycle_count = bq27x00_battery_read_cyct(di);
 
 		if (!is_bq27500)
 			cache.current_now = bq27x00_read(di, BQ27x00_REG_AI, false);
@@ -496,8 +497,8 @@ static int bq27x00_battery_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
 		ret = bq27x00_simple_value(di->charge_design_full, val);
 		break;
-	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
-		ret = bq27x00_simple_value(di->cache.charge_counter, val);
+	case POWER_SUPPLY_PROP_CYCLE_COUNT:
+		ret = bq27x00_simple_value(di->cache.cycle_count, val);
 		break;
 	case POWER_SUPPLY_PROP_ENERGY_NOW:
 		ret = bq27x00_battery_energy(di, val);

drivers/power/ds2760_battery.c

@@ -86,7 +86,11 @@ static int rated_capacities[] = {
 	920,	/* NEC */
 	1440,	/* Samsung */
 	1440,	/* BYD */
+#ifdef CONFIG_MACH_H4700
+	1800,	/* HP iPAQ hx4700 3.7V 1800mAh (359113-001) */
+#else
 	1440,	/* Lishen */
+#endif
 	1440,	/* NEC */
 	2880,	/* Samsung */
 	2880,	/* BYD */
@@ -186,7 +190,7 @@ static int ds2760_battery_read_status(struct ds2760_device_info *di)
 
 	scale[0] = di->full_active_uAh;
 	for (i = 1; i < 5; i++)
-		scale[i] = scale[i - 1] + di->raw[DS2760_ACTIVE_FULL + 2 + i];
+		scale[i] = scale[i - 1] + di->raw[DS2760_ACTIVE_FULL + 1 + i];
 
 	di->full_active_uAh = battery_interpolate(scale, di->temp_C / 10);
 	di->full_active_uAh *= 1000; /* convert to µAh */

drivers/power/gpio-charger.c

@@ -161,12 +161,27 @@ static int __devexit gpio_charger_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int gpio_charger_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct gpio_charger *gpio_charger = platform_get_drvdata(pdev);
+
+	power_supply_changed(&gpio_charger->charger);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(gpio_charger_pm_ops, NULL, gpio_charger_resume);
+
 static struct platform_driver gpio_charger_driver = {
 	.probe = gpio_charger_probe,
 	.remove = __devexit_p(gpio_charger_remove),
 	.driver = {
 		.name = "gpio-charger",
 		.owner = THIS_MODULE,
+		.pm = &gpio_charger_pm_ops,
 	},
 };
 

drivers/power/isp1704_charger.c

@@ -33,6 +33,7 @@
 #include <linux/usb/ulpi.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/power/isp1704_charger.h>
 
 /* Vendor specific Power Control register */
 #define ISP1704_PWR_CTRL		0x3d
@@ -70,6 +71,18 @@ struct isp1704_charger {
 	unsigned		max_power;
 };
 
+/*
+ * Disable/enable the power from the isp1704 if a function for it
+ * has been provided with platform data.
+ */
+static void isp1704_charger_set_power(struct isp1704_charger *isp, bool on)
+{
+	struct isp1704_charger_data	*board = isp->dev->platform_data;
+
+	if (board->set_power)
+		board->set_power(on);
+}
+
 /*
  * Determine is the charging port DCP (dedicated charger) or CDP (Host/HUB
  * chargers).
@@ -222,6 +235,9 @@ static void isp1704_charger_work(struct work_struct *data)
 
 	mutex_lock(&lock);
 
+	if (event != USB_EVENT_NONE)
+		isp1704_charger_set_power(isp, 1);
+
 	switch (event) {
 	case USB_EVENT_VBUS:
 		isp->online = true;
@@ -269,6 +285,8 @@ static void isp1704_charger_work(struct work_struct *data)
 		 */
 		if (isp->otg->gadget)
 			usb_gadget_disconnect(isp->otg->gadget);
+
+		isp1704_charger_set_power(isp, 0);
 		break;
 	case USB_EVENT_ENUMERATED:
 		if (isp->present)
@@ -394,6 +412,8 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev)
 	isp->dev = &pdev->dev;
 	platform_set_drvdata(pdev, isp);
 
+	isp1704_charger_set_power(isp, 1);
+
 	ret = isp1704_test_ulpi(isp);
 	if (ret < 0)
 		goto fail1;
@@ -434,6 +454,7 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev)
 
 	/* Detect charger if VBUS is valid (the cable was already plugged). */
 	ret = otg_io_read(isp->otg, ULPI_USB_INT_STS);
+	isp1704_charger_set_power(isp, 0);
 	if ((ret & ULPI_INT_VBUS_VALID) && !isp->otg->default_a) {
 		isp->event = USB_EVENT_VBUS;
 		schedule_work(&isp->work);
@@ -459,6 +480,7 @@ static int __devexit isp1704_charger_remove(struct platform_device *pdev)
 	otg_unregister_notifier(isp->otg, &isp->nb);
 	power_supply_unregister(&isp->psy);
 	otg_put_transceiver(isp->otg);
+	isp1704_charger_set_power(isp, 0);
 	kfree(isp);
 
 	return 0;

drivers/power/max8903_charger.c

+/*
+ * max8903_charger.c - Maxim 8903 USB/Adapter Charger Driver
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ * MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/power_supply.h>
+#include <linux/platform_device.h>
+#include <linux/power/max8903_charger.h>
+
+struct max8903_data {
+	struct max8903_pdata *pdata;
+	struct device *dev;
+	struct power_supply psy;
+	bool fault;
+	bool usb_in;
+	bool ta_in;
+};
+
+static enum power_supply_property max8903_charger_props[] = {
+	POWER_SUPPLY_PROP_STATUS, /* Charger status output */
+	POWER_SUPPLY_PROP_ONLINE, /* External power source */
+	POWER_SUPPLY_PROP_HEALTH, /* Fault or OK */
+};
+
+static int max8903_get_property(struct power_supply *psy,
+		enum power_supply_property psp,
+		union power_supply_propval *val)
+{
+	struct max8903_data *data = container_of(psy,
+			struct max8903_data, psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+		if (data->pdata->chg) {
+			if (gpio_get_value(data->pdata->chg) == 0)
+				val->intval = POWER_SUPPLY_STATUS_CHARGING;
+			else if (data->usb_in || data->ta_in)
+				val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			else
+				val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		}
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = 0;
+		if (data->usb_in || data->ta_in)
+			val->intval = 1;
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		if (data->fault)
+			val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static irqreturn_t max8903_dcin(int irq, void *_data)
+{
+	struct max8903_data *data = _data;
+	struct max8903_pdata *pdata = data->pdata;
+	bool ta_in;
+	enum power_supply_type old_type;
+
+	ta_in = gpio_get_value(pdata->dok) ? false : true;
+
+	if (ta_in == data->ta_in)
+		return IRQ_HANDLED;
+
+	data->ta_in = ta_in;
+
+	/* Set Current-Limit-Mode 1:DC 0:USB */
+	if (pdata->dcm)
+		gpio_set_value(pdata->dcm, ta_in ? 1 : 0);
+
+	/* Charger Enable / Disable (cen is negated) */
+	if (pdata->cen)
+		gpio_set_value(pdata->cen, ta_in ? 0 :
+				(data->usb_in ? 0 : 1));
+
+	dev_dbg(data->dev, "TA(DC-IN) Charger %s.\n", ta_in ?
+			"Connected" : "Disconnected");
+
+	old_type = data->psy.type;
+
+	if (data->ta_in)
+		data->psy.type = POWER_SUPPLY_TYPE_MAINS;
+	else if (data->usb_in)
+		data->psy.type = POWER_SUPPLY_TYPE_USB;
+	else
+		data->psy.type = POWER_SUPPLY_TYPE_BATTERY;
+
+	if (old_type != data->psy.type)
+		power_supply_changed(&data->psy);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t max8903_usbin(int irq, void *_data)
+{
+	struct max8903_data *data = _data;
+	struct max8903_pdata *pdata = data->pdata;
+	bool usb_in;
+	enum power_supply_type old_type;
+
+	usb_in = gpio_get_value(pdata->uok) ? false : true;
+
+	if (usb_in == data->usb_in)
+		return IRQ_HANDLED;
+
+	data->usb_in = usb_in;
+
+	/* Do not touch Current-Limit-Mode */
+
+	/* Charger Enable / Disable (cen is negated) */
+	if (pdata->cen)
+		gpio_set_value(pdata->cen, usb_in ? 0 :
+				(data->ta_in ? 0 : 1));
+
+	dev_dbg(data->dev, "USB Charger %s.\n", usb_in ?
+			"Connected" : "Disconnected");
+
+	old_type = data->psy.type;
+
+	if (data->ta_in)
+		data->psy.type = POWER_SUPPLY_TYPE_MAINS;
+	else if (data->usb_in)
+		data->psy.type = POWER_SUPPLY_TYPE_USB;
+	else
+		data->psy.type = POWER_SUPPLY_TYPE_BATTERY;
+
+	if (old_type != data->psy.type)
+		power_supply_changed(&data->psy);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t max8903_fault(int irq, void *_data)
+{
+	struct max8903_data *data = _data;
+	struct max8903_pdata *pdata = data->pdata;
+	bool fault;
+
+	fault = gpio_get_value(pdata->flt) ? false : true;
+
+	if (fault == data->fault)
+		return IRQ_HANDLED;
+
+	data->fault = fault;
+
+	if (fault)
+		dev_err(data->dev, "Charger suffers a fault and stops.\n");
+	else
+		dev_err(data->dev, "Charger recovered from a fault.\n");
+
+	return IRQ_HANDLED;
+}
+
+static __devinit int max8903_probe(struct platform_device *pdev)
+{
+	struct max8903_data *data;
+	struct device *dev = &pdev->dev;
+	struct max8903_pdata *pdata = pdev->dev.platform_data;
+	int ret = 0;
+	int gpio;
+	int ta_in = 0;
+	int usb_in = 0;
+
+	data = kzalloc(sizeof(struct max8903_data), GFP_KERNEL);
+	if (data == NULL) {
+		dev_err(dev, "Cannot allocate memory.\n");
+		return -ENOMEM;
+	}
+	data->pdata = pdata;
+	data->dev = dev;
+	platform_set_drvdata(pdev, data);
+
+	if (pdata->dc_valid == false && pdata->usb_valid == false) {
+		dev_err(dev, "No valid power sources.\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	if (pdata->dc_valid) {
+		if (pdata->dok && gpio_is_valid(pdata->dok) &&
+				pdata->dcm && gpio_is_valid(pdata->dcm)) {
+			gpio = pdata->dok; /* PULL_UPed Interrupt */
+			ta_in = gpio_get_value(gpio) ? 0 : 1;
+
+			gpio = pdata->dcm; /* Output */
+			gpio_set_value(gpio, ta_in);
+		} else {
+			dev_err(dev, "When DC is wired, DOK and DCM should"
+					" be wired as well.\n");
+			ret = -EINVAL;
+			goto err;
+		}
+	} else {
+		if (pdata->dcm) {
+			if (gpio_is_valid(pdata->dcm))
+				gpio_set_value(pdata->dcm, 0);
+			else {
+				dev_err(dev, "Invalid pin: dcm.\n");
+				ret = -EINVAL;
+				goto err;
+			}
+		}
+	}
+
+	if (pdata->usb_valid) {
+		if (pdata->uok && gpio_is_valid(pdata->uok)) {
+			gpio = pdata->uok;
+			usb_in = gpio_get_value(gpio) ? 0 : 1;
+		} else {
+			dev_err(dev, "When USB is wired, UOK should be wired."
+					"as well.\n");
+			ret = -EINVAL;
+			goto err;
+		}
+	}
+
+	if (pdata->cen) {
+		if (gpio_is_valid(pdata->cen)) {
+			gpio_set_value(pdata->cen, (ta_in || usb_in) ? 0 : 1);
+		} else {
+			dev_err(dev, "Invalid pin: cen.\n");
+			ret = -EINVAL;
+			goto err;
+		}
+	}
+
+	if (pdata->chg) {
+		if (!gpio_is_valid(pdata->chg)) {
+			dev_err(dev, "Invalid pin: chg.\n");
+			ret = -EINVAL;
+			goto err;
+		}
+	}
+
+	if (pdata->flt) {
+		if (!gpio_is_valid(pdata->flt)) {
+			dev_err(dev, "Invalid pin: flt.\n");
+			ret = -EINVAL;
+			goto err;
+		}
+	}
+
+	if (pdata->usus) {
+		if (!gpio_is_valid(pdata->usus)) {
+			dev_err(dev, "Invalid pin: usus.\n");
+			ret = -EINVAL;
+			goto err;
+		}
+	}
+
+	data->fault = false;
+	data->ta_in = ta_in;
+	data->usb_in = usb_in;
+
+	data->psy.name = "max8903_charger";
+	data->psy.type = (ta_in) ? POWER_SUPPLY_TYPE_MAINS :
+			((usb_in) ? POWER_SUPPLY_TYPE_USB :
+			 POWER_SUPPLY_TYPE_BATTERY);
+	data->psy.get_property = max8903_get_property;
+	data->psy.properties = max8903_charger_props;
+	data->psy.num_properties = ARRAY_SIZE(max8903_charger_props);
+
+	ret = power_supply_register(dev, &data->psy);
+	if (ret) {
+		dev_err(dev, "failed: power supply register.\n");
+		goto err;
+	}
+
+	if (pdata->dc_valid) {
+		ret = request_threaded_irq(gpio_to_irq(pdata->dok),
+				NULL, max8903_dcin,
+				IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+				"MAX8903 DC IN", data);
+		if (ret) {
+			dev_err(dev, "Cannot request irq %d for DC (%d)\n",
+					gpio_to_irq(pdata->dok), ret);
+			goto err_psy;
+		}
+	}
+
+	if (pdata->usb_valid) {
+		ret = request_threaded_irq(gpio_to_irq(pdata->uok),
+				NULL, max8903_usbin,
+				IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+				"MAX8903 USB IN", data);
+		if (ret) {
+			dev_err(dev, "Cannot request irq %d for USB (%d)\n",
+					gpio_to_irq(pdata->uok), ret);
+			goto err_dc_irq;
+		}
+	}
+
+	if (pdata->flt) {
+		ret = request_threaded_irq(gpio_to_irq(pdata->flt),
+				NULL, max8903_fault,
+				IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+				"MAX8903 Fault", data);
+		if (ret) {
+			dev_err(dev, "Cannot request irq %d for Fault (%d)\n",
+					gpio_to_irq(pdata->flt), ret);
+			goto err_usb_irq;
+		}
+	}
+
+	return 0;
+
+err_usb_irq:
+	if (pdata->usb_valid)
+		free_irq(gpio_to_irq(pdata->uok), data);
+err_dc_irq:
+	if (pdata->dc_valid)
+		free_irq(gpio_to_irq(pdata->dok), data);
+err_psy:
+	power_supply_unregister(&data->psy);
+err:
+	kfree(data);
+	return ret;
+}
+
+static __devexit int max8903_remove(struct platform_device *pdev)
+{
+	struct max8903_data *data = platform_get_drvdata(pdev);
+
+	if (data) {
+		struct max8903_pdata *pdata = data->pdata;
+
+		if (pdata->flt)
+			free_irq(gpio_to_irq(pdata->flt), data);
+		if (pdata->usb_valid)
+			free_irq(gpio_to_irq(pdata->uok), data);
+		if (pdata->dc_valid)
+			free_irq(gpio_to_irq(pdata->dok), data);
+		power_supply_unregister(&data->psy);
+		kfree(data);
+	}
+
+	return 0;
+}
+
+static struct platform_driver max8903_driver = {
+	.probe	= max8903_probe,
+	.remove	= __devexit_p(max8903_remove),
+	.driver = {
+		.name	= "max8903-charger",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init max8903_init(void)
+{
+	return platform_driver_register(&max8903_driver);
+}
+module_init(max8903_init);
+
+static void __exit max8903_exit(void)
+{
+	platform_driver_unregister(&max8903_driver);
+}
+module_exit(max8903_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MAX8903 Charger Driver");
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_ALIAS("max8903-charger");

drivers/power/test_power.c

@@ -3,6 +3,12 @@
  *
  * Copyright 2010  Anton Vorontsov <cbouatmailru@gmail.com>
  *
+ * Dynamic module parameter code from the Virtual Battery Driver
+ * Copyright (C) 2008 Pylone, Inc.
+ * By: Masashi YOKOTA <yokota@pylone.jp>
+ * Originally found here:
+ * http://downloads.pylone.jp/src/virtual_battery/virtual_battery-0.0.1.tar.bz2
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -15,8 +21,12 @@
 #include <linux/delay.h>
 #include <linux/vermagic.h>
 
-static int test_power_ac_online = 1;
-static int test_power_battery_status = POWER_SUPPLY_STATUS_CHARGING;
+static int ac_online			= 1;
+static int battery_status		= POWER_SUPPLY_STATUS_DISCHARGING;
+static int battery_health		= POWER_SUPPLY_HEALTH_GOOD;
+static int battery_present		= 1; /* true */
+static int battery_technology		= POWER_SUPPLY_TECHNOLOGY_LION;
+static int battery_capacity		= 50;
 
 static int test_power_get_ac_property(struct power_supply *psy,
 				      enum power_supply_property psp,
@@ -24,7 +34,7 @@ static int test_power_get_ac_property(struct power_supply *psy,
 {
 	switch (psp) {
 	case POWER_SUPPLY_PROP_ONLINE:
-		val->intval = test_power_ac_online;
+		val->intval = ac_online;
 		break;
 	default:
 		return -EINVAL;
@@ -47,22 +57,30 @@ static int test_power_get_battery_property(struct power_supply *psy,
 		val->strval = UTS_RELEASE;
 		break;
 	case POWER_SUPPLY_PROP_STATUS:
-		val->intval = test_power_battery_status;
+		val->intval = battery_status;
 		break;
 	case POWER_SUPPLY_PROP_CHARGE_TYPE:
 		val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
 		break;
 	case POWER_SUPPLY_PROP_HEALTH:
-		val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		val->intval = battery_health;
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = battery_present;
 		break;
 	case POWER_SUPPLY_PROP_TECHNOLOGY:
-		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		val->intval = battery_technology;
 		break;
 	case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
 		val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
 		break;
 	case POWER_SUPPLY_PROP_CAPACITY:
-		val->intval = 50;
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		val->intval = battery_capacity;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		val->intval = 100;
 		break;
 	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
 	case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW:
@@ -84,9 +102,11 @@ static enum power_supply_property test_power_battery_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_CHARGE_TYPE,
 	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 	POWER_SUPPLY_PROP_CHARGE_FULL,
-	POWER_SUPPLY_PROP_CHARGE_EMPTY,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
 	POWER_SUPPLY_PROP_CAPACITY,
 	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
 	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
@@ -118,6 +138,7 @@ static struct power_supply test_power_supplies[] = {
 	},
 };
 
+
 static int __init test_power_init(void)
 {
 	int i;
@@ -145,8 +166,8 @@ static void __exit test_power_exit(void)
 	int i;
 
 	/* Let's see how we handle changes... */
-	test_power_ac_online = 0;
-	test_power_battery_status = POWER_SUPPLY_STATUS_DISCHARGING;
+	ac_online = 0;
+	battery_status = POWER_SUPPLY_STATUS_DISCHARGING;
 	for (i = 0; i < ARRAY_SIZE(test_power_supplies); i++)
 		power_supply_changed(&test_power_supplies[i]);
 	pr_info("%s: 'changed' event sent, sleeping for 10 seconds...\n",
@@ -158,6 +179,241 @@ static void __exit test_power_exit(void)
 }
 module_exit(test_power_exit);
 
+
+
+#define MAX_KEYLENGTH 256
+struct battery_property_map {
+	int value;
+	char const *key;
+};
+
+static struct battery_property_map map_ac_online[] = {
+	{ 0,  "on"  },
+	{ 1,  "off" },
+	{ -1, NULL  },
+};
+
+static struct battery_property_map map_status[] = {
+	{ POWER_SUPPLY_STATUS_CHARGING,     "charging"     },
+	{ POWER_SUPPLY_STATUS_DISCHARGING,  "discharging"  },
+	{ POWER_SUPPLY_STATUS_NOT_CHARGING, "not-charging" },
+	{ POWER_SUPPLY_STATUS_FULL,         "full"         },
+	{ -1,                               NULL           },
+};
+
+static struct battery_property_map map_health[] = {
+	{ POWER_SUPPLY_HEALTH_GOOD,           "good"        },
+	{ POWER_SUPPLY_HEALTH_OVERHEAT,       "overheat"    },
+	{ POWER_SUPPLY_HEALTH_DEAD,           "dead"        },
+	{ POWER_SUPPLY_HEALTH_OVERVOLTAGE,    "overvoltage" },
+	{ POWER_SUPPLY_HEALTH_UNSPEC_FAILURE, "failure"     },
+	{ -1,                                 NULL          },
+};
+
+static struct battery_property_map map_present[] = {
+	{ 0,  "false" },
+	{ 1,  "true"  },
+	{ -1, NULL    },
+};
+
+static struct battery_property_map map_technology[] = {
+	{ POWER_SUPPLY_TECHNOLOGY_NiMH, "NiMH" },
+	{ POWER_SUPPLY_TECHNOLOGY_LION, "LION" },
+	{ POWER_SUPPLY_TECHNOLOGY_LIPO, "LIPO" },
+	{ POWER_SUPPLY_TECHNOLOGY_LiFe, "LiFe" },
+	{ POWER_SUPPLY_TECHNOLOGY_NiCd, "NiCd" },
+	{ POWER_SUPPLY_TECHNOLOGY_LiMn, "LiMn" },
+	{ -1,				NULL   },
+};
+
+
+static int map_get_value(struct battery_property_map *map, const char *key,
+				int def_val)
+{
+	char buf[MAX_KEYLENGTH];
+	int cr;
+
+	strncpy(buf, key, MAX_KEYLENGTH);
+	buf[MAX_KEYLENGTH-1] = '\0';
+
+	cr = strnlen(buf, MAX_KEYLENGTH) - 1;
+	if (buf[cr] == '\n')
+		buf[cr] = '\0';
+
+	while (map->key) {
+		if (strncasecmp(map->key, buf, MAX_KEYLENGTH) == 0)
+			return map->value;
+		map++;
+	}
+
+	return def_val;
+}
+
+
+static const char *map_get_key(struct battery_property_map *map, int value,
+				const char *def_key)
+{
+	while (map->key) {
+		if (map->value == value)
+			return map->key;
+		map++;
+	}
+
+	return def_key;
+}
+
+static int param_set_ac_online(const char *key, const struct kernel_param *kp)
+{
+	ac_online = map_get_value(map_ac_online, key, ac_online);
+	power_supply_changed(&test_power_supplies[0]);
+	return 0;
+}
+
+static int param_get_ac_online(char *buffer, const struct kernel_param *kp)
+{
+	strcpy(buffer, map_get_key(map_ac_online, ac_online, "unknown"));
+	return strlen(buffer);
+}
+
+static int param_set_battery_status(const char *key,
+					const struct kernel_param *kp)
+{
+	battery_status = map_get_value(map_status, key, battery_status);
+	power_supply_changed(&test_power_supplies[1]);
+	return 0;
+}
+
+static int param_get_battery_status(char *buffer, const struct kernel_param *kp)
+{
+	strcpy(buffer, map_get_key(map_status, battery_status, "unknown"));
+	return strlen(buffer);
+}
+
+static int param_set_battery_health(const char *key,
+					const struct kernel_param *kp)
+{
+	battery_health = map_get_value(map_health, key, battery_health);
+	power_supply_changed(&test_power_supplies[1]);
+	return 0;
+}
+
+static int param_get_battery_health(char *buffer, const struct kernel_param *kp)
+{
+	strcpy(buffer, map_get_key(map_health, battery_health, "unknown"));
+	return strlen(buffer);
+}
+
+static int param_set_battery_present(const char *key,
+					const struct kernel_param *kp)
+{
+	battery_present = map_get_value(map_present, key, battery_present);
+	power_supply_changed(&test_power_supplies[0]);
+	return 0;
+}
+
+static int param_get_battery_present(char *buffer,
+					const struct kernel_param *kp)
+{
+	strcpy(buffer, map_get_key(map_present, battery_present, "unknown"));
+	return strlen(buffer);
+}
+
+static int param_set_battery_technology(const char *key,
+					const struct kernel_param *kp)
+{
+	battery_technology = map_get_value(map_technology, key,
+						battery_technology);
+	power_supply_changed(&test_power_supplies[1]);
+	return 0;
+}
+
+static int param_get_battery_technology(char *buffer,
+					const struct kernel_param *kp)
+{
+	strcpy(buffer,
+		map_get_key(map_technology, battery_technology, "unknown"));
+	return strlen(buffer);
+}
+
+static int param_set_battery_capacity(const char *key,
+					const struct kernel_param *kp)
+{
+	int tmp;
+
+	if (1 != sscanf(key, "%d", &tmp))
+		return -EINVAL;
+
+	battery_capacity = tmp;
+	power_supply_changed(&test_power_supplies[1]);
+	return 0;
+}
+
+#define param_get_battery_capacity param_get_int
+
+
+
+static struct kernel_param_ops param_ops_ac_online = {
+	.set = param_set_ac_online,
+	.get = param_get_ac_online,
+};
+
+static struct kernel_param_ops param_ops_battery_status = {
+	.set = param_set_battery_status,
+	.get = param_get_battery_status,
+};
+
+static struct kernel_param_ops param_ops_battery_present = {
+	.set = param_set_battery_present,
+	.get = param_get_battery_present,
+};
+
+static struct kernel_param_ops param_ops_battery_technology = {
+	.set = param_set_battery_technology,
+	.get = param_get_battery_technology,
+};
+
+static struct kernel_param_ops param_ops_battery_health = {
+	.set = param_set_battery_health,
+	.get = param_get_battery_health,
+};
+
+static struct kernel_param_ops param_ops_battery_capacity = {
+	.set = param_set_battery_capacity,
+	.get = param_get_battery_capacity,
+};
+
+
+#define param_check_ac_online(name, p) __param_check(name, p, void);
+#define param_check_battery_status(name, p) __param_check(name, p, void);
+#define param_check_battery_present(name, p) __param_check(name, p, void);
+#define param_check_battery_technology(name, p) __param_check(name, p, void);
+#define param_check_battery_health(name, p) __param_check(name, p, void);
+#define param_check_battery_capacity(name, p) __param_check(name, p, void);
+
+
+module_param(ac_online, ac_online, 0644);
+MODULE_PARM_DESC(ac_online, "AC charging state <on|off>");
+
+module_param(battery_status, battery_status, 0644);
+MODULE_PARM_DESC(battery_status,
+	"battery status <charging|discharging|not-charging|full>");
+
+module_param(battery_present, battery_present, 0644);
+MODULE_PARM_DESC(battery_present,
+	"battery presence state <good|overheat|dead|overvoltage|failure>");
+
+module_param(battery_technology, battery_technology, 0644);
+MODULE_PARM_DESC(battery_technology,
+	"battery technology <NiMH|LION|LIPO|LiFe|NiCd|LiMn>");
+
+module_param(battery_health, battery_health, 0644);
+MODULE_PARM_DESC(battery_health,
+	"battery health state <good|overheat|dead|overvoltage|failure>");
+
+module_param(battery_capacity, battery_capacity, 0644);
+MODULE_PARM_DESC(battery_capacity, "battery capacity (percentage)");
+
+
 MODULE_DESCRIPTION("Power supply driver for testing");
 MODULE_AUTHOR("Anton Vorontsov <cbouatmailru@gmail.com>");
 MODULE_LICENSE("GPL");

drivers/power/z2_battery.c

@@ -271,24 +271,33 @@ static int __devexit z2_batt_remove(struct i2c_client *client)
 }
 
 #ifdef CONFIG_PM
-static int z2_batt_suspend(struct i2c_client *client, pm_message_t state)
+static int z2_batt_suspend(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct z2_charger *charger = i2c_get_clientdata(client);
 
 	flush_work_sync(&charger->bat_work);
 	return 0;
 }
 
-static int z2_batt_resume(struct i2c_client *client)
+static int z2_batt_resume(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct z2_charger *charger = i2c_get_clientdata(client);
 
 	schedule_work(&charger->bat_work);
 	return 0;
 }
+
+static const struct dev_pm_ops z2_battery_pm_ops = {
+	.suspend	= z2_batt_suspend,
+	.resume		= z2_batt_resume,
+};
+
+#define	Z2_BATTERY_PM_OPS	(&z2_battery_pm_ops)
+
 #else
-#define z2_batt_suspend NULL
-#define z2_batt_resume NULL
+#define	Z2_BATTERY_PM_OPS	(NULL)
 #endif
 
 static const struct i2c_device_id z2_batt_id[] = {
@@ -301,11 +310,10 @@ static struct i2c_driver z2_batt_driver = {
 	.driver	= {
 		.name	= "z2-battery",
 		.owner	= THIS_MODULE,
+		.pm	= Z2_BATTERY_PM_OPS
 	},
 	.probe		= z2_batt_probe,
 	.remove		= z2_batt_remove,
-	.suspend	= z2_batt_suspend,
-	.resume		= z2_batt_resume,
 	.id_table	= z2_batt_id,
 };
 

include/linux/power/isp1704_charger.h

+/*
+ * ISP1704 USB Charger Detection driver
+ *
+ * Copyright (C) 2011 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+#ifndef __ISP1704_CHARGER_H
+#define __ISP1704_CHARGER_H
+
+struct isp1704_charger_data {
+	void		(*set_power)(bool on);
+};
+
+#endif

include/linux/power/max8903_charger.h

+/*
+ * max8903_charger.h - Maxim 8903 USB/Adapter Charger Driver
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ * MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef __MAX8903_CHARGER_H__
+#define __MAX8903_CHARGER_H__
+
+struct max8903_pdata {
+	/*
+	 * GPIOs
+	 * cen, chg, flt, and usus are optional.
+	 * dok, dcm, and uok are not optional depending on the status of
+	 * dc_valid and usb_valid.
+	 */
+	int cen;	/* Charger Enable input */
+	int dok;	/* DC(Adapter) Power OK output */
+	int uok;	/* USB Power OK output */
+	int chg;	/* Charger status output */
+	int flt;	/* Fault output */
+	int dcm;	/* Current-Limit Mode input (1: DC, 2: USB) */
+	int usus;	/* USB Suspend Input (1: suspended) */
+
+	/*
+	 * DC(Adapter/TA) is wired
+	 * When dc_valid is true,
+	 *	dok and dcm should be valid.
+	 *
+	 * At least one of dc_valid or usb_valid should be true.
+	 */
+	bool dc_valid;
+	/*
+	 * USB is wired
+	 * When usb_valid is true,
+	 *	uok should be valid.
+	 */
+	bool usb_valid;
+};
+
+#endif /* __MAX8903_CHARGER_H__ */