Commit ea783736 authored by Jeb J. Cramer's avatar Jeb J. Cramer Committed by Jeff Garzik

e1000 3/10:

* Set interrupt delay timer defaults to 0 across all adapters 
parent 42c5b9bd
......@@ -914,8 +914,9 @@ e1000_configure_rx(struct e1000_adapter *adapter)
/* set the Receive Delay Timer Register */
if(adapter->hw.mac_type >= e1000_82540) {
E1000_WRITE_REG(&adapter->hw, RDTR, adapter->rx_int_delay);
if(adapter->hw.mac_type >= e1000_82540) {
E1000_WRITE_REG(&adapter->hw, RADV, adapter->rx_abs_int_delay);
/* Set the interrupt throttling rate. Value is calculated
......@@ -923,9 +924,6 @@ e1000_configure_rx(struct e1000_adapter *adapter)
#define MAX_INTS_PER_SEC 8000
#define DEFAULT_ITR 1000000000/(MAX_INTS_PER_SEC * 256)
E1000_WRITE_REG(&adapter->hw, ITR, DEFAULT_ITR);
} else {
E1000_WRITE_REG(&adapter->hw, RDTR, adapter->rx_int_delay);
}
/* Setup the Base and Length of the Rx Descriptor Ring */
......
......@@ -197,8 +197,7 @@ E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
#define MIN_RXD 80
#define MAX_82544_RXD 4096
#define DEFAULT_RDTR 128
#define DEFAULT_RDTR_82544 0
#define DEFAULT_RDTR 0
#define MAX_RXDELAY 0xFFFF
#define MIN_RXDELAY 0
......@@ -398,16 +397,13 @@ e1000_check_options(struct e1000_adapter *adapter)
}
{ /* Receive Interrupt Delay */
char *rdtr = "using default of " __MODULE_STRING(DEFAULT_RDTR);
char *rdtr_82544 = "using default of "
__MODULE_STRING(DEFAULT_RDTR_82544);
struct e1000_option opt = {
.type = range_option,
.name = "Receive Interrupt Delay",
.arg = { r: { min: MIN_RXDELAY, max: MAX_RXDELAY }}
};
e1000_mac_type mac_type = adapter->hw.mac_type;
opt.def = mac_type > e1000_82544 ? DEFAULT_RDTR : 0;
opt.err = mac_type > e1000_82544 ? rdtr : rdtr_82544;
opt.def = DEFAULT_RDTR;
opt.err = rdtr;
adapter->rx_int_delay = RxIntDelay[bd];
e1000_validate_option(&adapter->rx_int_delay, &opt);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment