Commit ead7b940 authored by Brice Goglin's avatar Brice Goglin Committed by Jeff Garzik

myri10ge: use DCA if DCA is compiled as a module

Use DCA in myri10ge when CONFIG_DCA_MODULE is set as well.

And thus force INTEL_IOATDMA to =y so that DCA=y if we are =y.
Signed-off-by: default avatarBrice Goglin <brice@myri.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent 004f23b9
......@@ -2464,6 +2464,7 @@ config MYRI10GE
select FW_LOADER
select CRC32
select INET_LRO
select INTEL_IOATDMA
---help---
This driver supports Myricom Myri-10G Dual Protocol interface in
Ethernet mode. If the eeprom on your board is not recent enough,
......
......@@ -183,7 +183,7 @@ struct myri10ge_slice_state {
dma_addr_t fw_stats_bus;
int watchdog_tx_done;
int watchdog_tx_req;
#ifdef CONFIG_DCA
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
int cached_dca_tag;
int cpu;
__be32 __iomem *dca_tag;
......@@ -215,7 +215,7 @@ struct myri10ge_priv {
int msi_enabled;
int msix_enabled;
struct msix_entry *msix_vectors;
#ifdef CONFIG_DCA
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
int dca_enabled;
#endif
u32 link_state;
......@@ -891,7 +891,7 @@ static int myri10ge_reset(struct myri10ge_priv *mgp)
struct myri10ge_slice_state *ss;
int i, status;
size_t bytes;
#ifdef CONFIG_DCA
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
unsigned long dca_tag_off;
#endif
......@@ -986,7 +986,7 @@ static int myri10ge_reset(struct myri10ge_priv *mgp)
}
put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
#ifdef CONFIG_DCA
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_DCA_OFFSET, &cmd, 0);
dca_tag_off = cmd.data0;
for (i = 0; i < mgp->num_slices; i++) {
......@@ -1025,7 +1025,7 @@ static int myri10ge_reset(struct myri10ge_priv *mgp)
return status;
}
#ifdef CONFIG_DCA
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
static void
myri10ge_write_dca(struct myri10ge_slice_state *ss, int cpu, int tag)
{
......@@ -1458,7 +1458,7 @@ static int myri10ge_poll(struct napi_struct *napi, int budget)
struct net_device *netdev = ss->mgp->dev;
int work_done;
#ifdef CONFIG_DCA
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
if (ss->mgp->dca_enabled)
myri10ge_update_dca(ss);
#endif
......@@ -1687,7 +1687,7 @@ static const char myri10ge_gstrings_main_stats[][ETH_GSTRING_LEN] = {
"tx_boundary", "WC", "irq", "MSI", "MSIX",
"read_dma_bw_MBs", "write_dma_bw_MBs", "read_write_dma_bw_MBs",
"serial_number", "watchdog_resets",
#ifdef CONFIG_DCA
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
"dca_capable_firmware", "dca_device_present",
#endif
"link_changes", "link_up", "dropped_link_overflow",
......@@ -1766,7 +1766,7 @@ myri10ge_get_ethtool_stats(struct net_device *netdev,
data[i++] = (unsigned int)mgp->read_write_dma;
data[i++] = (unsigned int)mgp->serial_number;
data[i++] = (unsigned int)mgp->watchdog_resets;
#ifdef CONFIG_DCA
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
data[i++] = (unsigned int)(mgp->ss[0].dca_tag != NULL);
data[i++] = (unsigned int)(mgp->dca_enabled);
#endif
......@@ -3764,7 +3764,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
dev_err(&pdev->dev, "failed reset\n");
goto abort_with_slices;
}
#ifdef CONFIG_DCA
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
myri10ge_setup_dca(mgp);
#endif
pci_set_drvdata(pdev, mgp);
......@@ -3867,7 +3867,7 @@ static void myri10ge_remove(struct pci_dev *pdev)
netdev = mgp->dev;
unregister_netdev(netdev);
#ifdef CONFIG_DCA
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
myri10ge_teardown_dca(mgp);
#endif
myri10ge_dummy_rdma(mgp, 0);
......@@ -3912,7 +3912,7 @@ static struct pci_driver myri10ge_driver = {
#endif
};
#ifdef CONFIG_DCA
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
static int
myri10ge_notify_dca(struct notifier_block *nb, unsigned long event, void *p)
{
......@@ -3944,7 +3944,7 @@ static __init int myri10ge_init_module(void)
myri10ge_driver.name, myri10ge_rss_hash);
myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
}
#ifdef CONFIG_DCA
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
dca_register_notify(&myri10ge_dca_notifier);
#endif
......@@ -3955,7 +3955,7 @@ module_init(myri10ge_init_module);
static __exit void myri10ge_cleanup_module(void)
{
#ifdef CONFIG_DCA
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
dca_unregister_notify(&myri10ge_dca_notifier);
#endif
pci_unregister_driver(&myri10ge_driver);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment