Skip to content

L
linux
Commit eb360ba2 authored by Vojtech Pavlik's avatar Vojtech Pavlik
Browse files
Options

Add an i8042_restore_ctr command line option. This allows not 

restoring the CTR value after an AUX write by default, which
breaks Transmeta Crusoe i8042 chip emulation. The option might
be needed on some ancient hardware, though.
Move registration of the KBD interface after the AUX probe. This
makes sure we don't kill the keyboard by probing for the AUX port.
Fix a bug in i8042.c which only enables the interfaces after the
probe routine for mice/keyboards was executed.
Add some paranoia flush/sync calls to make sure the chip doesn't get
stuck.
Don't check_region, we already request_region where applicable.
Do i8042_reset on all non-PC architectures.
Cleanup comments.
Add an i8042_restore_ctr command line option. This allows not
restoring the CTR value after an AUX write by default, which
breaks Transmeta Crusoe i8042 chip emulation. The option might
be needed on some ancient hardware, though.
Move registration of the KBD interface after the AUX probe. This
makes sure we don't kill the keyboard by probing for the AUX port.
Fix a bug in i8042.c which only enables the interfaces after the
probe routine for mice/keyboards was executed.
Add some paranoia flush/sync calls to make sure the chip doesn't get
stuck.
Don't check_region, we already request_region where applicable.
Do i8042_reset on all non-PC architectures.
Cleanup comments.
parent 7d30d1df
Show whitespace changes
Inline Side-by-side
Showing with 78 additions and 83 deletions
drivers/input/serio/i8042.c
View file @ eb360ba2
......@@ -31,11 +31,13 @@ MODULE_PARM(i8042_noaux, "1i");
MODULE_PARM(i8042_unlock, "1i");
MODULE_PARM(i8042_reset, "1i");
MODULE_PARM(i8042_direct, "1i");
MODULE_PARM(i8042_restore_ctr, "1i");
static int i8042_noaux;
static int i8042_unlock;
static int i8042_reset;
static int i8042_direct;
static int i8042_restore_ctr;
spinlock_t i8042_lock = SPIN_LOCK_UNLOCKED;
......@@ -111,8 +113,9 @@ static int i8042_flush(void)
while ((i8042_read_status() & I8042_STR_OBF) && (i++ < I8042_BUFFER_SIZE))
#ifdef I8042_DEBUG_IO
printk(KERN_DEBUG "i8042.c: %02x <- i8042 (flush) [%d]\n",
i8042_read_data(), (int) (jiffies - i8042_start));
printk(KERN_DEBUG "i8042.c: %02x <- i8042 (flush, %s) [%d]\n",
i8042_read_data(), i8042_read_status() & I8042_STR_AUXDATA ? "aux" : "kbd",
(int) (jiffies - i8042_start));
#else
i8042_read_data();
#endif
......@@ -123,11 +126,11 @@ static int i8042_flush(void)
}
/*
* i8042_command() executes a command on the i8042. It also sends the input parameter(s)
* of the commands to it, and receives the output value(s). The parameters are to be
* stored in the param array, and the output is placed into the same array. The number
* of the parameters and output values is encoded in bits 8-11 of the command
* number.
* i8042_command() executes a command on the i8042. It also sends the input
* parameter(s) of the commands to it, and receives the output value(s). The
* parameters are to be stored in the param array, and the output is placed
* into the same array. The number of the parameters and output values is
* encoded in bits 8-11 of the command number.
*/
static int i8042_command(unsigned char *param, int command)
......@@ -182,9 +185,6 @@ static int i8042_command(unsigned char *param, int command)
/*
* i8042_kbd_write() sends a byte out through the keyboard interface.
* It also automatically refreshes the CTR value, since some i8042's
* trash their CTR after attempting to send data to an nonexistent
* device.
*/
static int i8042_kbd_write(struct serio *port, unsigned char c)
......@@ -222,10 +222,11 @@ static int i8042_aux_write(struct serio *port, unsigned char c)
retval = i8042_command(&c, I8042_CMD_AUX_SEND);
/*
* Here we restore the CTR value. I don't know why, but i8042's in half-AT
* mode tend to trash their CTR when doing the AUX_SEND command.
* Here we restore the CTR value if requested. I don't know why, but i8042's in
* half-AT mode tend to trash their CTR when doing the AUX_SEND command.
*/
if (i8042_restore_ctr)
retval |= i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR);
/*
......@@ -240,16 +241,14 @@ static int i8042_aux_write(struct serio *port, unsigned char c)
/*
* i8042_open() is called when a port is open by the higher layer.
* It allocates an interrupt and enables the port.
* It allocates the interrupt and enables in in the chip.
*/
static int i8042_open(struct serio *port)
{
struct i8042_values *values = port->driver;
/*
* Allocate the interrupt
*/
i8042_flush();
if (request_irq(values->irq, i8042_interrupt, 0, "i8042", NULL)) {
printk(KERN_ERR "i8042.c: Can't get irq %d for %s, unregistering the port.\n", values->irq, values->name);
......@@ -258,10 +257,6 @@ static int i8042_open(struct serio *port)
return -1;
}
/*
* Enable the interrupt.
*/
i8042_ctr |= values->irqen;
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
......@@ -269,22 +264,21 @@ static int i8042_open(struct serio *port)
return -1;
}
i8042_interrupt(0, NULL, NULL);
return 0;
}
/*
* i8042_close() frees the interrupt, and disables the interface when the
* upper layer doesn't need it anymore.
* i8042_close() frees the interrupt, so that it can possibly be used
* by another driver. We never know - if the user doesn't have a mouse,
* the BIOS could have used the AUX interupt for PCI.
*/
static void i8042_close(struct serio *port)
{
struct i8042_values *values = port->driver;
/*
* Disable the interrupt.
*/
i8042_ctr &= ~values->irqen;
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
......@@ -292,11 +286,9 @@ static void i8042_close(struct serio *port)
return;
}
/*
* Free the interrupt
*/
free_irq(values->irq, NULL);
i8042_flush();
}
/*
......@@ -362,7 +354,7 @@ static void i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs)
((str & I8042_STR_TIMEOUT) ? SERIO_TIMEOUT : 0);
#ifdef I8042_DEBUG_IO
printk(KERN_DEBUG "i8042.c: %02x <- i8042 (interrupt-%s, %d) [%d]\n",
printk(KERN_DEBUG "i8042.c: %02x <- i8042 (interrupt, %s, %d) [%d]\n",
data, (str & I8042_STR_AUXDATA) ? "aux" : "kbd", irq, (int) (jiffies - i8042_start));
#endif
......@@ -391,22 +383,13 @@ static void i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs)
/*
* i8042_controller init initializes the i8042 controller, and,
* most importantly, sets it into non-xlated mode.
* most importantly, sets it into non-xlated mode if that's
* desired.
*/
static int __init i8042_controller_init(void)
{
/*
* Check the i/o region before we touch it.
*/
#if !defined(__i386__) && !defined(__sh__) && !defined(__alpha__)
if (check_region(I8042_DATA_REG, 16)) {
printk(KERN_ERR "i8042.c: %#x port already in use!\n", I8042_DATA_REG);
return -1;
}
#endif
/*
* Test the i8042. We need to know if it thinks it's working correctly
* before doing anything else.
......@@ -431,7 +414,7 @@ static int __init i8042_controller_init(void)
}
/*
* Read the CTR.
* Save the CTR for restoral on unload / reboot.
*/
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) {
......@@ -439,14 +422,10 @@ static int __init i8042_controller_init(void)
return -1;
}
/*
* Save the CTR for restoral on unload / reboot.
*/
i8042_initial_ctr = i8042_ctr;
/*
* Disable both interfaces and their interrupts.
* Disable the keyboard interface and interrupt.
*/
i8042_ctr |= I8042_CTR_KBDDIS;
......@@ -625,7 +604,16 @@ static int __init i8042_check_aux(struct i8042_values *values, struct serio *por
static int __init i8042_port_register(struct i8042_values *values, struct serio *port)
{
values->exists = 1;
i8042_ctr &= ~values->disable;
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
printk(KERN_WARNING "i8042.c: Can't write CTR while registering.\n");
return -1;
}
serio_register_port(port);
printk(KERN_INFO "serio: i8042 %s port at %#x,%#x irq %d\n",
values->name, I8042_DATA_REG, I8042_COMMAND_REG, values->irq);
......@@ -638,45 +626,45 @@ static void i8042_timer_func(unsigned long data)
mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD);
}
static void __init i8042_start_polling(void)
#ifndef MODULE
static int __init i8042_setup_reset(char *str)
{
i8042_ctr &= ~I8042_CTR_KBDDIS;
if (i8042_aux_values.exists)
i8042_ctr &= ~I8042_CTR_AUXDIS;
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
printk(KERN_WARNING "i8042.c: Can't write CTR while starting polling.\n");
return;
}
i8042_timer.function = i8042_timer_func;
mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD);
i8042_reset = 1;
return 1;
}
static void __exit i8042_stop_polling(void)
static int __init i8042_setup_noaux(char *str)
{
del_timer(&i8042_timer);
i8042_noaux = 1;
return 1;
}
/*
* Module init and cleanup functions.
*/
void __init i8042_setup(char *str, int *ints)
static int __init i8042_setup_unlock(char *str)
{
if (!strcmp(str, "i8042_reset=1"))
i8042_reset = 1;
if (!strcmp(str, "i8042_noaux=1"))
i8042_noaux = 1;
if (!strcmp(str, "i8042_unlock=1"))
i8042_unlock = 1;
if (!strcmp(str, "i8042_direct=1"))
return 1;
}
static int __init i8042_setup_direct(char *str)
{
i8042_direct = 1;
return 1;
}
static int __init i8042_setup_restore_ctr(char *str)
{
i8042_restore_ctr = 1;
return 1;
}
__setup("i8042_reset", i8042_setup_reset);
__setup("i8042_noaux", i8042_setup_noaux);
__setup("i8042_unlock", i8042_setup_unlock);
__setup("i8042_direct", i8042_setup_direct);
__setup("i8042_restore_ctr", i8042_setup_restore_ctr);
#endif
/*
* Reset the 8042 back to original mode.
* We need to reset the 8042 back to original mode on system shutdown,
* because otherwise BIOSes will be confused.
*/
static int i8042_notify_sys(struct notifier_block *this, unsigned long code,
void *unused)
{
......@@ -698,18 +686,23 @@ int __init i8042_init(void)
i8042_start = jiffies;
#endif
#if !defined(__i386__) && !defined(__x86_64__)
i8042_reset = 1;
#endif
if (!i8042_platform_init())
return -EBUSY;
if (i8042_controller_init())
return -ENODEV;
i8042_port_register(&i8042_kbd_values, &i8042_kbd_port);
if (!i8042_noaux && !i8042_check_aux(&i8042_aux_values, &i8042_aux_port))
i8042_port_register(&i8042_aux_values, &i8042_aux_port);
i8042_start_polling();
i8042_port_register(&i8042_kbd_values, &i8042_kbd_port);
i8042_timer.function = i8042_timer_func;
mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD);
register_reboot_notifier(&i8042_notifier);
......@@ -720,7 +713,7 @@ void __exit i8042_exit(void)
{
unregister_reboot_notifier(&i8042_notifier);
i8042_stop_polling();
del_timer(&i8042_timer);
if (i8042_kbd_values.exists)
serio_unregister_port(&i8042_kbd_port);
......@@ -735,3 +728,5 @@ void __exit i8042_exit(void)
module_init(i8042_init);
module_exit(i8042_exit);
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7