Merge tag 'media/v3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:
 "For some last time fixes:
   - a regression detected on Kernel 3.16 related to VBI Teletext
     application breakage on drivers using videobuf2 (see
     https://bugzilla.kernel.org/show_bug.cgi?id=84401).  The bug was
     noticed on saa7134 (migrated to VB2 on 3.16), but also affects
     em28xx (migrated on 3.9 to VB2);
   - two additional sanity checks at videobuf2;
   - two fixups to restore proper VBI support at the em28xx driver;
   - two Kernel oops fixups (at cx24123 and cx2341x drivers);
   - a bug at adv7604 where an if was doing just the opposite as it
     would be expected;
   - some documentation fixups to match the behavior defined at the
     Kernel"

* tag 'media/v3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] em28xx-v4l: get rid of field "users" in struct em28xx_v4l2"
  [media] em28xx: fix VBI handling logic
  [media] DocBook media: improve the poll() documentation
  [media] DocBook media: fix the poll() 'no QBUF' documentation
  [media] vb2: fix VBI/poll regression
  [media] cx2341x: fix kernel oops
  [media] cx24123: fix kernel oops due to missing parent pointer
  [media] adv7604: fix inverted condition
  [media] media/radio: fix radio-miropcm20.c build with io.h header file
  [media] vb2: fix plane index sanity check in vb2_plane_cookie()
  [media] DocBook media: update version number and V4L2 changes
  [media] DocBook media: fix fieldname in struct v4l2_subdev_selection
  [media] vb2: fix vb2 state check when start_streaming fails
  [media] videobuf2-core.h: fix comment
  [media] videobuf2-core: add comments before the WARN_ON
  [media] videobuf2-dma-sg: fix for wrong GFP mask to sg_alloc_table_from_pages

Documentation/DocBook/media/v4l/compat.xml

@@ -2545,6 +2545,30 @@ fields changed from _s32 to _u32.
       </orderedlist>
     </section>
 
+    <section>
+      <title>V4L2 in Linux 3.16</title>
+      <orderedlist>
+        <listitem>
+	  <para>Added event V4L2_EVENT_SOURCE_CHANGE.
+	  </para>
+        </listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 3.17</title>
+      <orderedlist>
+        <listitem>
+	  <para>Extended &v4l2-pix-format;. Added format flags.
+	  </para>
+        </listitem>
+        <listitem>
+	  <para>Added compound control types and &VIDIOC-QUERY-EXT-CTRL;.
+	  </para>
+        </listitem>
+      </orderedlist>
+    </section>
+
     <section id="other">
       <title>Relation of V4L2 to other Linux multimedia APIs</title>
 

Documentation/DocBook/media/v4l/func-poll.xml

@@ -29,9 +29,12 @@ can suspend execution until the driver has captured data or is ready
 to accept data for output.</para>
 
     <para>When streaming I/O has been negotiated this function waits
-until a buffer has been filled or displayed and can be dequeued with
-the &VIDIOC-DQBUF; ioctl. When buffers are already in the outgoing
-queue of the driver the function returns immediately.</para>
+until a buffer has been filled by the capture device and can be dequeued
+with the &VIDIOC-DQBUF; ioctl. For output devices this function waits
+until the device is ready to accept a new buffer to be queued up with
+the &VIDIOC-QBUF; ioctl for display. When buffers are already in the outgoing
+queue of the driver (capture) or the incoming queue isn't full (display)
+the function returns immediately.</para>
 
     <para>On success <function>poll()</function> returns the number of
 file descriptors that have been selected (that is, file descriptors
@@ -44,10 +47,22 @@ Capture devices set the <constant>POLLIN</constant> and
 flags. When the function timed out it returns a value of zero, on
 failure it returns <returnvalue>-1</returnvalue> and the
 <varname>errno</varname> variable is set appropriately. When the
-application did not call &VIDIOC-QBUF; or &VIDIOC-STREAMON; yet the
+application did not call &VIDIOC-STREAMON; the
 <function>poll()</function> function succeeds, but sets the
 <constant>POLLERR</constant> flag in the
-<structfield>revents</structfield> field.</para>
+<structfield>revents</structfield> field. When the
+application has called &VIDIOC-STREAMON; for a capture device but hasn't
+yet called &VIDIOC-QBUF;, the <function>poll()</function> function
+succeeds and sets the <constant>POLLERR</constant> flag in the
+<structfield>revents</structfield> field. For output devices this
+same situation will cause <function>poll()</function> to succeed
+as well, but it sets the <constant>POLLOUT</constant> and
+<constant>POLLWRNORM</constant> flags in the <structfield>revents</structfield>
+field.</para>
+
+    <para>If an event occurred (see &VIDIOC-DQEVENT;) then
+<constant>POLLPRI</constant> will be set in the <structfield>revents</structfield>
+field and <function>poll()</function> will return.</para>
 
     <para>When use of the <function>read()</function> function has
 been negotiated and the driver does not capture yet, the
@@ -58,10 +73,18 @@ continuously (as opposed to, for example, still images) the function
 may return immediately.</para>
 
     <para>When use of the <function>write()</function> function has
-been negotiated the <function>poll</function> function just waits
+been negotiated and the driver does not stream yet, the
+<function>poll</function> function starts streaming. When that fails
+it returns a <constant>POLLERR</constant> as above. Otherwise it waits
 until the driver is ready for a non-blocking
 <function>write()</function> call.</para>
 
+    <para>If the caller is only interested in events (just
+<constant>POLLPRI</constant> is set in the <structfield>events</structfield>
+field), then <function>poll()</function> will <emphasis>not</emphasis>
+start streaming if the driver does not stream yet. This makes it
+possible to just poll for events and not for buffers.</para>
+
     <para>All drivers implementing the <function>read()</function> or
 <function>write()</function> function or streaming I/O must also
 support the <function>poll()</function> function.</para>

Documentation/DocBook/media/v4l/v4l2.xml

@@ -152,10 +152,11 @@ structs, ioctls) must be noted in more detail in the history chapter
 applications. -->
 
       <revision>
-	<revnumber>3.16</revnumber>
-	<date>2014-05-27</date>
-	<authorinitials>lp</authorinitials>
-	<revremark>Extended &v4l2-pix-format;. Added format flags.
+	<revnumber>3.17</revnumber>
+	<date>2014-08-04</date>
+	<authorinitials>lp, hv</authorinitials>
+	<revremark>Extended &v4l2-pix-format;. Added format flags. Added compound control types
+and VIDIOC_QUERY_EXT_CTRL.
 	</revremark>
       </revision>
 
@@ -538,7 +539,7 @@ and discussions on the V4L mailing list.</revremark>
 </partinfo>
 
 <title>Video for Linux Two API Specification</title>
- <subtitle>Revision 3.14</subtitle>
+ <subtitle>Revision 3.17</subtitle>
 
   <chapter id="common">
     &sub-common;

Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml

@@ -119,7 +119,7 @@
 	  </row>
 	  <row>
 	    <entry>&v4l2-rect;</entry>
-	    <entry><structfield>rect</structfield></entry>
+	    <entry><structfield>r</structfield></entry>
 	    <entry>Selection rectangle, in pixels.</entry>
 	  </row>
 	  <row>

drivers/media/common/cx2341x.c

@@ -1490,6 +1490,7 @@ static struct v4l2_ctrl *cx2341x_ctrl_new_custom(struct v4l2_ctrl_handler *hdl,
 {
 	struct v4l2_ctrl_config cfg;
 
+	memset(&cfg, 0, sizeof(cfg));
 	cx2341x_ctrl_fill(id, &cfg.name, &cfg.type, &min, &max, &step, &def, &cfg.flags);
 	cfg.ops = &cx2341x_ops;
 	cfg.id = id;

drivers/media/dvb-frontends/cx24123.c

@@ -1095,6 +1095,7 @@ struct dvb_frontend *cx24123_attach(const struct cx24123_config *config,
 		sizeof(state->tuner_i2c_adapter.name));
 	state->tuner_i2c_adapter.algo      = &cx24123_tuner_i2c_algo;
 	state->tuner_i2c_adapter.algo_data = NULL;
+	state->tuner_i2c_adapter.dev.parent = i2c->dev.parent;
 	i2c_set_adapdata(&state->tuner_i2c_adapter, state);
 	if (i2c_add_adapter(&state->tuner_i2c_adapter) < 0) {
 		err("tuner i2c bus could not be initialized\n");

drivers/media/i2c/adv7604.c

@@ -2325,7 +2325,7 @@ static int adv7604_log_status(struct v4l2_subdev *sd)
 	v4l2_info(sd, "HDCP keys read: %s%s\n",
 			(hdmi_read(sd, 0x04) & 0x20) ? "yes" : "no",
 			(hdmi_read(sd, 0x04) & 0x10) ? "ERROR" : "");
-	if (!is_hdmi(sd)) {
+	if (is_hdmi(sd)) {
 		bool audio_pll_locked = hdmi_read(sd, 0x04) & 0x01;
 		bool audio_sample_packet_detect = hdmi_read(sd, 0x18) & 0x01;
 		bool audio_mute = io_read(sd, 0x65) & 0x40;

drivers/media/radio/radio-miropcm20.c

@@ -27,6 +27,7 @@
 
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/videodev2.h>
 #include <linux/kthread.h>

drivers/media/usb/em28xx/em28xx-video.c

@@ -1342,7 +1342,7 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 	struct em28xx *dev = video_drvdata(file);
 	struct em28xx_v4l2 *v4l2 = dev->v4l2;
 
-	if (v4l2->streaming_users > 0)
+	if (vb2_is_busy(&v4l2->vb_vidq))
 		return -EBUSY;
 
 	vidioc_try_fmt_vid_cap(file, priv, f);
@@ -1883,8 +1883,9 @@ static int em28xx_v4l2_open(struct file *filp)
 		return -EINVAL;
 	}
 
-	em28xx_videodbg("open dev=%s type=%s\n",
-			video_device_node_name(vdev), v4l2_type_names[fh_type]);
+	em28xx_videodbg("open dev=%s type=%s users=%d\n",
+			video_device_node_name(vdev), v4l2_type_names[fh_type],
+			v4l2->users);
 
 	if (mutex_lock_interruptible(&dev->lock))
 		return -ERESTARTSYS;
@@ -1897,9 +1898,7 @@ static int em28xx_v4l2_open(struct file *filp)
 		return ret;
 	}
 
-	if (v4l2_fh_is_singular_file(filp)) {
-		em28xx_videodbg("first opened filehandle, initializing device\n");
-
+	if (v4l2->users == 0) {
 		em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
 
 		if (vdev->vfl_type != VFL_TYPE_RADIO)
@@ -1910,8 +1909,6 @@ static int em28xx_v4l2_open(struct file *filp)
 		 * of some i2c devices
 		 */
 		em28xx_wake_i2c(dev);
-	} else {
-		em28xx_videodbg("further filehandles are already opened\n");
 	}
 
 	if (vdev->vfl_type == VFL_TYPE_RADIO) {
@@ -1921,6 +1918,7 @@ static int em28xx_v4l2_open(struct file *filp)
 
 	kref_get(&dev->ref);
 	kref_get(&v4l2->ref);
+	v4l2->users++;
 
 	mutex_unlock(&dev->lock);
 
@@ -2027,11 +2025,12 @@ static int em28xx_v4l2_close(struct file *filp)
 	struct em28xx_v4l2    *v4l2 = dev->v4l2;
 	int              errCode;
 
-	mutex_lock(&dev->lock);
+	em28xx_videodbg("users=%d\n", v4l2->users);
 
-	if (v4l2_fh_is_singular_file(filp)) {
-		em28xx_videodbg("last opened filehandle, shutting down device\n");
+	vb2_fop_release(filp);
+	mutex_lock(&dev->lock);
 
+	if (v4l2->users == 1) {
 		/* No sense to try to write to the device */
 		if (dev->disconnected)
 			goto exit;
@@ -2050,12 +2049,10 @@ static int em28xx_v4l2_close(struct file *filp)
 			em28xx_errdev("cannot change alternate number to "
 					"0 (error=%i)\n", errCode);
 		}
-	} else {
-		em28xx_videodbg("further opened filehandles left\n");
 	}
 
 exit:
-	vb2_fop_release(filp);
+	v4l2->users--;
 	kref_put(&v4l2->ref, em28xx_free_v4l2);
 	mutex_unlock(&dev->lock);
 	kref_put(&dev->ref, em28xx_free_device);

drivers/media/usb/em28xx/em28xx.h

@@ -524,6 +524,7 @@ struct em28xx_v4l2 {
 	int sensor_yres;
 	int sensor_xtal;
 
+	int users;		/* user count for exclusive use */
 	int streaming_users;    /* number of actively streaming users */
 
 	u32 frequency;		/* selected tuner frequency */

drivers/media/v4l2-core/videobuf2-core.c

@@ -971,6 +971,7 @@ static int __reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req)
 	 * to the userspace.
 	 */
 	req->count = allocated_buffers;
+	q->waiting_for_buffers = !V4L2_TYPE_IS_OUTPUT(q->type);
 
 	return 0;
 }
@@ -1018,6 +1019,7 @@ static int __create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create
 		memset(q->plane_sizes, 0, sizeof(q->plane_sizes));
 		memset(q->alloc_ctx, 0, sizeof(q->alloc_ctx));
 		q->memory = create->memory;
+		q->waiting_for_buffers = !V4L2_TYPE_IS_OUTPUT(q->type);
 	}
 
 	num_buffers = min(create->count, VIDEO_MAX_FRAME - q->num_buffers);
@@ -1130,7 +1132,7 @@ EXPORT_SYMBOL_GPL(vb2_plane_vaddr);
  */
 void *vb2_plane_cookie(struct vb2_buffer *vb, unsigned int plane_no)
 {
-	if (plane_no > vb->num_planes || !vb->planes[plane_no].mem_priv)
+	if (plane_no >= vb->num_planes || !vb->planes[plane_no].mem_priv)
 		return NULL;
 
 	return call_ptr_memop(vb, cookie, vb->planes[plane_no].mem_priv);
@@ -1165,13 +1167,10 @@ void vb2_buffer_done(struct vb2_buffer *vb, enum vb2_buffer_state state)
 	if (WARN_ON(vb->state != VB2_BUF_STATE_ACTIVE))
 		return;
 
-	if (!q->start_streaming_called) {
-		if (WARN_ON(state != VB2_BUF_STATE_QUEUED))
-			state = VB2_BUF_STATE_QUEUED;
-	} else if (WARN_ON(state != VB2_BUF_STATE_DONE &&
-			   state != VB2_BUF_STATE_ERROR)) {
+	if (WARN_ON(state != VB2_BUF_STATE_DONE &&
+		    state != VB2_BUF_STATE_ERROR &&
+		    state != VB2_BUF_STATE_QUEUED))
 		state = VB2_BUF_STATE_ERROR;
-	}
 
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	/*
@@ -1762,6 +1761,12 @@ static int vb2_start_streaming(struct vb2_queue *q)
 	q->start_streaming_called = 0;
 
 	dprintk(1, "driver refused to start streaming\n");
+	/*
+	 * If you see this warning, then the driver isn't cleaning up properly
+	 * after a failed start_streaming(). See the start_streaming()
+	 * documentation in videobuf2-core.h for more information how buffers
+	 * should be returned to vb2 in start_streaming().
+	 */
 	if (WARN_ON(atomic_read(&q->owned_by_drv_count))) {
 		unsigned i;
 
@@ -1777,6 +1782,12 @@ static int vb2_start_streaming(struct vb2_queue *q)
 		/* Must be zero now */
 		WARN_ON(atomic_read(&q->owned_by_drv_count));
 	}
+	/*
+	 * If done_list is not empty, then start_streaming() didn't call
+	 * vb2_buffer_done(vb, VB2_BUF_STATE_QUEUED) but STATE_ERROR or
+	 * STATE_DONE.
+	 */
+	WARN_ON(!list_empty(&q->done_list));
 	return ret;
 }
 
@@ -1812,6 +1823,7 @@ static int vb2_internal_qbuf(struct vb2_queue *q, struct v4l2_buffer *b)
 	 */
 	list_add_tail(&vb->queued_entry, &q->queued_list);
 	q->queued_count++;
+	q->waiting_for_buffers = false;
 	vb->state = VB2_BUF_STATE_QUEUED;
 	if (V4L2_TYPE_IS_OUTPUT(q->type)) {
 		/*
@@ -2123,6 +2135,12 @@ static void __vb2_queue_cancel(struct vb2_queue *q)
 	if (q->start_streaming_called)
 		call_void_qop(q, stop_streaming, q);
 
+	/*
+	 * If you see this warning, then the driver isn't cleaning up properly
+	 * in stop_streaming(). See the stop_streaming() documentation in
+	 * videobuf2-core.h for more information how buffers should be returned
+	 * to vb2 in stop_streaming().
+	 */
 	if (WARN_ON(atomic_read(&q->owned_by_drv_count))) {
 		for (i = 0; i < q->num_buffers; ++i)
 			if (q->bufs[i]->state == VB2_BUF_STATE_ACTIVE)
@@ -2272,6 +2290,7 @@ static int vb2_internal_streamoff(struct vb2_queue *q, enum v4l2_buf_type type)
 	 * their normal dequeued state.
 	 */
 	__vb2_queue_cancel(q);
+	q->waiting_for_buffers = !V4L2_TYPE_IS_OUTPUT(q->type);
 
 	dprintk(3, "successful\n");
 	return 0;
@@ -2590,10 +2609,17 @@ unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait)
 	}
 
 	/*
-	 * There is nothing to wait for if no buffer has been queued and the
-	 * queue isn't streaming, or if the error flag is set.
+	 * There is nothing to wait for if the queue isn't streaming, or if the
+	 * error flag is set.
+	 */
+	if (!vb2_is_streaming(q) || q->error)
+		return res | POLLERR;
+	/*
+	 * For compatibility with vb1: if QBUF hasn't been called yet, then
+	 * return POLLERR as well. This only affects capture queues, output
+	 * queues will always initialize waiting_for_buffers to false.
 	 */
-	if ((list_empty(&q->queued_list) && !vb2_is_streaming(q)) || q->error)
+	if (q->waiting_for_buffers)
 		return res | POLLERR;
 
 	/*

drivers/media/v4l2-core/videobuf2-dma-sg.c

@@ -113,7 +113,7 @@ static void *vb2_dma_sg_alloc(void *alloc_ctx, unsigned long size, gfp_t gfp_fla
 		goto fail_pages_alloc;
 
 	ret = sg_alloc_table_from_pages(&buf->sg_table, buf->pages,
-			buf->num_pages, 0, size, gfp_flags);
+			buf->num_pages, 0, size, GFP_KERNEL);
 	if (ret)
 		goto fail_table_alloc;
 

include/media/videobuf2-core.h

@@ -295,7 +295,7 @@ struct vb2_buffer {
  *			can return an error if hardware fails, in that case all
  *			buffers that have been already given by the @buf_queue
  *			callback are to be returned by the driver by calling
- *			@vb2_buffer_done(VB2_BUF_STATE_DEQUEUED).
+ *			@vb2_buffer_done(VB2_BUF_STATE_QUEUED).
  *			If you need a minimum number of buffers before you can
  *			start streaming, then set @min_buffers_needed in the
  *			vb2_queue structure. If that is non-zero then
@@ -380,6 +380,9 @@ struct v4l2_fh;
  * @start_streaming_called: start_streaming() was called successfully and we
  *		started streaming.
  * @error:	a fatal error occurred on the queue
+ * @waiting_for_buffers: used in poll() to check if vb2 is still waiting for
+ *		buffers. Only set for capture queues if qbuf has not yet been
+ *		called since poll() needs to return POLLERR in that situation.
  * @fileio:	file io emulator internal data, used only if emulator is active
  * @threadio:	thread io internal data, used only if thread is active
  */
@@ -417,6 +420,7 @@ struct vb2_queue {
 	unsigned int			streaming:1;
 	unsigned int			start_streaming_called:1;
 	unsigned int			error:1;
+	unsigned int			waiting_for_buffers:1;
 
 	struct vb2_fileio_data		*fileio;
 	struct vb2_threadio_data	*threadio;