Merge tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core Framework:
   - Document (kerneldoc) core mfd_add_devices() API

  New Drivers:
   - Altera SOCFPGA System Manager
   - Maxim MAX77650/77651 PMIC
   - Maxim MAX77663 PMIC
   - ST Multi-Function eXpander (STMFX)

  New Device Support:
   - LEDs support in Intel Cherry Trail Whiskey Cove PMIC
   - RTC support in SAMSUNG Electronics S2MPA01 PMIC
   - SAM9X60 support in Atmel HLCDC (High-end LCD Controller)
   - USB X-Powers AXP 8xx PMICs
   - Integrated Sensor Hub (ISH) in ChromeOS EC
   - USB PD Logger in ChromeOS EC
   - AXP223 in X-Powers AXP series PMICs
   - Power Supply in X-Powers AXP 803 PMICs
   - Comet Lake in Intel Low Power Subsystem
   - Fingerprint MCU in ChromeOS EC
   - Touchpad MCU in ChromeOS EC
   - Move TI LM3532 support to LED

  New Functionality:
   - max77650, max77620: Add/extend DT support
   - max77620 power-off
   - syscon clocking
   - croc_ec host sleep event

  Fix-ups:
   - Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs
   - Remove unused functionality; rk808, da9063-*
   - SPDX conversion; da9063-*, atmel-*,
   - Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr
   - Fix-up DT bindings; ti-lmu, cirrus,lochnagar
   - Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb

  Bug Fixes:
   - Fix incorrect defined values; max77620, da9063
   - Fix device initialisation; twl6040
   - Reset device on init; intel-lpss
   - Fix build warnings when !OF; sun6i-prcm
   - Register OF match tables; tps65912-spi
   - Fix DMI matching; intel_quark_i2c_gpio"

* tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits)
  mfd: Use dev_get_drvdata() directly
  mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device
  mfd: cros_ec: Instantiate properly CrOS FP MCU device
  mfd: cros_ec: Update the EC feature codes
  mfd: intel-lpss: Add Intel Comet Lake PCI IDs
  mfd: lochnagar: Add links to binding docs for sound and hwmon
  mfd: ab8500-debugfs: Fix a typo ("deubgfs")
  mfd: imx6sx: Add MQS register definition for iomuxc gpr
  dt-bindings: mfd: LMU: Fix lm3632 dt binding example
  mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching
  mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L
  mfd: tps65912-spi: Add missing of table registration
  mfd: axp20x: Add USB power supply mfd cell to AXP803
  mfd: sun6i-prcm: Fix build warning for non-OF configurations
  mfd: intel-lpss: Set the device in reset state when init
  platform/chrome: Add support for v1 of host sleep event
  mfd: cros_ec: Add host_sleep_event_v1 command
  mfd: cros_ec: Instantiate the CrOS USB PD logger driver
  mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable
  mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable
  ...

Documentation/devicetree/bindings/arm/altera/socfpga-system.txt

@@ -11,3 +11,15 @@ Example:
 		reg = <0xffd08000 0x1000>;
 		cpu1-start-addr = <0xffd080c4>;
 	};
+
+ARM64 - Stratix10
+Required properties:
+- compatible : "altr,sys-mgr-s10"
+- reg : Should contain 1 register range(address and length)
+        for system manager register.
+
+Example:
+	 sysmgr@ffd12000 {
+		compatible = "altr,sys-mgr-s10";
+		reg = <0xffd12000 0x228>;
+	};

Documentation/devicetree/bindings/arm/stm32/stm32-syscon.txt

@@ -5,10 +5,12 @@ Properties:
                  - " st,stm32mp157-syscfg " - for stm32mp157 based SoCs,
                  second value must be always "syscon".
    - reg : offset and length of the register set.
+   - clocks: phandle to the syscfg clock
 
  Example:
          syscfg: syscon@50020000 {
                  compatible = "st,stm32mp157-syscfg", "syscon";
                  reg = <0x50020000 0x400>;
+                 clocks = <&rcc SYSCFG>;
          };
 

Documentation/devicetree/bindings/input/max77650-onkey.txt

+Onkey driver for MAX77650 PMIC from Maxim Integrated.
+
+This module is part of the MAX77650 MFD device. For more details
+see Documentation/devicetree/bindings/mfd/max77650.txt.
+
+The onkey controller is represented as a sub-node of the PMIC node on
+the device tree.
+
+Required properties:
+--------------------
+- compatible:		Must be "maxim,max77650-onkey".
+
+Optional properties:
+- linux,code:		The key-code to be reported when the key is pressed.
+			Defaults to KEY_POWER.
+- maxim,onkey-slide:	The system's button is a slide switch, not the default
+			push button.
+
+Example:
+--------
+
+	onkey {
+		compatible = "maxim,max77650-onkey";
+		linux,code = <KEY_END>;
+		maxim,onkey-slide;
+	};

Documentation/devicetree/bindings/leds/leds-max77650.txt

+LED driver for MAX77650 PMIC from Maxim Integrated.
+
+This module is part of the MAX77650 MFD device. For more details
+see Documentation/devicetree/bindings/mfd/max77650.txt.
+
+The LED controller is represented as a sub-node of the PMIC node on
+the device tree.
+
+This device has three current sinks.
+
+Required properties:
+--------------------
+- compatible:		Must be "maxim,max77650-led"
+- #address-cells:	Must be <1>.
+- #size-cells:		Must be <0>.
+
+Each LED is represented as a sub-node of the LED-controller node. Up to
+three sub-nodes can be defined.
+
+Required properties of the sub-node:
+------------------------------------
+
+- reg:			Must be <0>, <1> or <2>.
+
+Optional properties of the sub-node:
+------------------------------------
+
+- label:		See Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger: See Documentation/devicetree/bindings/leds/common.txt
+
+For more details, please refer to the generic GPIO DT binding document
+<devicetree/bindings/gpio/gpio.txt>.
+
+Example:
+--------
+
+	leds {
+		compatible = "maxim,max77650-led";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			label = "blue:usr0";
+		};
+
+		led@1 {
+			reg = <1>;
+			label = "red:usr1";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led@2 {
+			reg = <2>;
+			label = "green:usr2";
+		};
+	};

Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt

@@ -7,6 +7,7 @@ Required properties:
    "atmel,sama5d2-hlcdc"
    "atmel,sama5d3-hlcdc"
    "atmel,sama5d4-hlcdc"
+   "microchip,sam9x60-hlcdc"
  - reg: base address and size of the HLCDC device registers.
  - clock-names: the name of the 3 clocks requested by the HLCDC device.
    Should contain "periph_clk", "sys_clk" and "slow_clk".

Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt

@@ -19,6 +19,8 @@ And these documents for the required sub-node binding details:
   [4] Clock: ../clock/cirrus,lochnagar.txt
   [5] Pinctrl: ../pinctrl/cirrus,lochnagar.txt
   [6] Regulator: ../regulator/cirrus,lochnagar.txt
+  [7] Sound: ../sound/cirrus,lochnagar.txt
+  [8] Hardware Monitor: ../hwmon/cirrus,lochnagar.txt
 
 Required properties:
 
@@ -41,6 +43,11 @@ Optional sub-nodes:
   - Bindings for the regulator components, see [6]. Only available on
     Lochnagar 2.
 
+  - lochnagar-sc : Binding for the sound card components, see [7].
+                   Only available on Lochnagar 2.
+  - lochnagar-hwmon : Binding for the hardware monitor components, see [8].
+                      Only available on Lochnagar 2.
+
 Optional properties:
 
   - present-gpios : Host present line, indicating the presence of a
@@ -65,4 +72,14 @@ lochnagar: lochnagar@22 {
 		compatible = "cirrus,lochnagar-pinctrl";
 		...
 	};
+
+	lochnagar-sc {
+		compatible = "cirrus,lochnagar2-soundcard";
+		...
+	};
+
+	lochnagar-hwmon {
+		compatible = "cirrus,lochnagar2-hwmon";
+		...
+	};
 };

Documentation/devicetree/bindings/mfd/max77620.txt

@@ -4,7 +4,8 @@ Required properties:
 -------------------
 - compatible: Must be one of
 		"maxim,max77620"
-		"maxim,max20024".
+		"maxim,max20024"
+		"maxim,max77663"
 - reg: I2C device address.
 
 Optional properties:
@@ -17,6 +18,11 @@ Optional properties:
 			IRQ numbers for different interrupt source of MAX77620
 			are defined at dt-bindings/mfd/max77620.h.
 
+- system-power-controller: Indicates that this PMIC is controlling the
+			   system power, see [1] for more details.
+
+[1] Documentation/devicetree/bindings/power/power-controller.txt
+
 Optional subnodes and their properties:
 =======================================
 
@@ -105,6 +111,7 @@ Optional properties:
 Here supported time periods by device in microseconds are as follows:
 MAX77620 supports 40, 80, 160, 320, 640, 1280, 2560 and 5120 microseconds.
 MAX20024 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds.
+MAX77663 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds.
 
 -maxim,power-ok-control: configure map power ok bit
 			1: Enables POK(Power OK) to control nRST_IO and GPIO1

Documentation/devicetree/bindings/mfd/max77650.txt

+MAX77650 ultra low-power PMIC from Maxim Integrated.
+
+Required properties:
+-------------------
+- compatible:		Must be "maxim,max77650"
+- reg:			I2C device address.
+- interrupts:		The interrupt on the parent the controller is
+			connected to.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells:	Must be <2>.
+
+- gpio-controller:	Marks the device node as a gpio controller.
+- #gpio-cells:		Must be <2>. The first cell is the pin number and
+			the second cell is used to specify the gpio active
+			state.
+
+Optional properties:
+--------------------
+gpio-line-names:	Single string containing the name of the GPIO line.
+
+The GPIO-controller module is represented as part of the top-level PMIC
+node. The device exposes a single GPIO line.
+
+For device-tree bindings of other sub-modules (regulator, power supply,
+LEDs and onkey) refer to the binding documents under the respective
+sub-system directories.
+
+For more details on GPIO bindings, please refer to the generic GPIO DT
+binding document <devicetree/bindings/gpio/gpio.txt>.
+
+Example:
+--------
+
+	pmic@48 {
+		compatible = "maxim,max77650";
+		reg = <0x48>;
+
+		interrupt-controller;
+		interrupt-parent = <&gpio2>;
+		#interrupt-cells = <2>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "max77650-charger";
+	};

Documentation/devicetree/bindings/mfd/stmfx.txt

+STMicroelectonics Multi-Function eXpander (STMFX) Core bindings
+
+ST Multi-Function eXpander (STMFX) is a slave controller using I2C for
+communication with the main MCU. Its main features are GPIO expansion, main
+MCU IDD measurement (IDD is the amount of current that flows through VDD) and
+resistive touchscreen controller.
+
+Required properties:
+- compatible: should be "st,stmfx-0300".
+- reg: I2C slave address of the device.
+- interrupts: interrupt specifier triggered by MFX_IRQ_OUT signal.
+  Please refer to ../interrupt-controller/interrupt.txt
+
+Optional properties:
+- drive-open-drain: configure MFX_IRQ_OUT as open drain.
+- vdd-supply: phandle of the regulator supplying STMFX.
+
+Example:
+
+	stmfx: stmfx@42 {
+		compatible = "st,stmfx-0300";
+		reg = <0x42>;
+		interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+		interrupt-parent = <&gpioi>;
+		vdd-supply = <&v3v3>;
+	};
+
+Please refer to ../pinctrl/pinctrl-stmfx.txt for STMFX GPIO expander function bindings.

Documentation/devicetree/bindings/mfd/ti-lmu.txt

@@ -104,8 +104,8 @@ lm3632@11 {
 	regulators {
 		compatible = "ti,lm363x-regulator";
 
-		ti,lcm-en1-gpio = <&pioC 0 GPIO_ACTIVE_HIGH>; /* PC0 */
-		ti,lcm-en2-gpio = <&pioC 1 GPIO_ACTIVE_HIGH>; /* PC1 */
+		enable-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>,
+			       <&pioC 1 GPIO_ACTIVE_HIGH>;
 
 		vboost {
 			regulator-name = "lcd_boost";

Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt

+STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander bindings
+
+ST Multi-Function eXpander (STMFX) offers up to 24 GPIOs expansion.
+Please refer to ../mfd/stmfx.txt for STMFX Core bindings.
+
+Required properties:
+- compatible: should be "st,stmfx-0300-pinctrl".
+- #gpio-cells: should be <2>, the first cell is the GPIO number and the second
+  cell is the gpio flags in accordance with <dt-bindings/gpio/gpio.h>.
+- gpio-controller: marks the device as a GPIO controller.
+- #interrupt-cells: should be <2>, the first cell is the GPIO number and the
+  second cell is the interrupt flags in accordance with
+  <dt-bindings/interrupt-controller/irq.h>.
+- interrupt-controller: marks the device as an interrupt controller.
+- gpio-ranges: specifies the mapping between gpio controller and pin
+  controller pins. Check "Concerning gpio-ranges property" below.
+Please refer to ../gpio/gpio.txt.
+
+Please refer to pinctrl-bindings.txt for pin configuration.
+
+Required properties for pin configuration sub-nodes:
+- pins: list of pins to which the configuration applies.
+
+Optional properties for pin configuration sub-nodes (pinconf-generic ones):
+- bias-disable: disable any bias on the pin.
+- bias-pull-up: the pin will be pulled up.
+- bias-pull-pin-default: use the pin-default pull state.
+- bias-pull-down: the pin will be pulled down.
+- drive-open-drain: the pin will be driven with open drain.
+- drive-push-pull: the pin will be driven actively high and low.
+- output-high: the pin will be configured as an output driving high level.
+- output-low: the pin will be configured as an output driving low level.
+
+Note that STMFX pins[15:0] are called "gpio[15:0]", and STMFX pins[23:16] are
+called "agpio[7:0]". Example, to refer to pin 18 of STMFX, use "agpio2".
+
+Concerning gpio-ranges property:
+- if all STMFX pins[24:0] are available (no other STMFX function in use), you
+  should use gpio-ranges = <&stmfx_pinctrl 0 0 24>;
+- if agpio[3:0] are not available (STMFX Touchscreen function in use), you
+  should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>;
+- if agpio[7:4] are not available (STMFX IDD function in use), you
+  should use gpio-ranges = <&stmfx_pinctrl 0 0 20>;
+
+
+Example:
+
+	stmfx: stmfx@42 {
+		...
+
+		stmfx_pinctrl: stmfx-pin-controller {
+			compatible = "st,stmfx-0300-pinctrl";
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			gpio-ranges = <&stmfx_pinctrl 0 0 24>;
+
+			joystick_pins: joystick {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
+				drive-push-pull;
+				bias-pull-up;
+			};
+		};
+	};
+
+Example of STMFX GPIO consumers:
+
+	joystick {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&joystick_pins>;
+		pinctrl-names = "default";
+		button-0 {
+			label = "JoySel";
+			linux,code = <KEY_ENTER>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+		};
+		button-1 {
+			label = "JoyDown";
+			linux,code = <KEY_DOWN>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+		};
+		button-2 {
+			label = "JoyLeft";
+			linux,code = <KEY_LEFT>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+		};
+		button-3 {
+			label = "JoyRight";
+			linux,code = <KEY_RIGHT>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+		};
+		button-4 {
+			label = "JoyUp";
+			linux,code = <KEY_UP>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		orange {
+			gpios = <&stmfx_pinctrl 17 1>;
+		};
+
+		blue {
+			gpios = <&stmfx_pinctrl 19 1>;
+		};
+	}

Documentation/devicetree/bindings/power/supply/max77650-charger.txt

+Battery charger driver for MAX77650 PMIC from Maxim Integrated.
+
+This module is part of the MAX77650 MFD device. For more details
+see Documentation/devicetree/bindings/mfd/max77650.txt.
+
+The charger is represented as a sub-node of the PMIC node on the device tree.
+
+Required properties:
+--------------------
+- compatible:		Must be "maxim,max77650-charger"
+
+Optional properties:
+--------------------
+- input-voltage-min-microvolt:	Minimum CHGIN regulation voltage. Must be one
+				of: 4000000, 4100000, 4200000, 4300000,
+				4400000, 4500000, 4600000, 4700000.
+- input-current-limit-microamp:	CHGIN input current limit (in microamps). Must
+				be one of: 95000, 190000, 285000, 380000,
+				475000.
+
+Example:
+--------
+
+	charger {
+		compatible = "maxim,max77650-charger";
+		input-voltage-min-microvolt = <4200000>;
+		input-current-limit-microamp = <285000>;
+	};

MAINTAINERS

@@ -710,6 +710,12 @@ L:	linux-gpio@vger.kernel.org
 S:	Maintained
 F:	drivers/gpio/gpio-altera.c
 
+ALTERA SYSTEM MANAGER DRIVER
+M:	Thor Thayer <thor.thayer@linux.intel.com>
+S:	Maintained
+F:	drivers/mfd/altera-sysmgr.c
+F:	include/linux/mfd/altera-sysgmr.h
+
 ALTERA SYSTEM RESOURCE DRIVER FOR ARRIA10 DEVKIT
 M:	Thor Thayer <thor.thayer@linux.intel.com>
 S:	Maintained
@@ -9517,6 +9523,20 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.txt
 F:	drivers/iio/proximity/mb1232.c
 
+MAXIM MAX77650 PMIC MFD DRIVER
+M:	Bartosz Golaszewski <bgolaszewski@baylibre.com>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/*/*max77650.txt
+F:	Documentation/devicetree/bindings/*/max77650*.txt
+F:	include/linux/mfd/max77650.h
+F:	drivers/mfd/max77650.c
+F:	drivers/regulator/max77650-regulator.c
+F:	drivers/power/supply/max77650-charger.c
+F:	drivers/input/misc/max77650-onkey.c
+F:	drivers/leds/leds-max77650.c
+F:	drivers/gpio/gpio-max77650.c
+
 MAXIM MAX77802 PMIC REGULATOR DEVICE DRIVER
 M:	Javier Martinez Canillas <javier@dowhile0.org>
 L:	linux-kernel@vger.kernel.org

arch/arm/configs/socfpga_defconfig

@@ -106,6 +106,7 @@ CONFIG_SENSORS_LTC2978_REGULATOR=y
 CONFIG_WATCHDOG=y
 CONFIG_DW_WATCHDOG=y
 CONFIG_MFD_ALTERA_A10SR=y
+CONFIG_MFD_ALTERA_SYSMGR=y
 CONFIG_MFD_STMPE=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y

arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi

@@ -393,7 +393,7 @@ spi1: spi@ffda5000 {
 		};
 
 		sysmgr: sysmgr@ffd12000 {
-			compatible = "altr,sys-mgr", "syscon";
+			compatible = "altr,sys-mgr-s10","altr,sys-mgr";
 			reg = <0xffd12000 0x228>;
 		};
 

arch/arm64/configs/defconfig

@@ -432,6 +432,7 @@ CONFIG_MESON_WATCHDOG=m
 CONFIG_RENESAS_WDT=y
 CONFIG_UNIPHIER_WATCHDOG=y
 CONFIG_BCM2835_WDT=y
+CONFIG_MFD_ALTERA_SYSMGR=y
 CONFIG_MFD_BD9571MWV=y
 CONFIG_MFD_AXP20X_I2C=y
 CONFIG_MFD_AXP20X_RSB=y

drivers/gpio/Kconfig

@@ -1097,6 +1097,13 @@ config GPIO_MAX77620
 	  driver also provides interrupt support for each of the gpios.
 	  Say yes here to enable the max77620 to be used as gpio controller.
 
+config GPIO_MAX77650
+	tristate "Maxim MAX77650/77651 GPIO support"
+	depends on MFD_MAX77650
+	help
+	  GPIO driver for MAX77650/77651 PMIC from Maxim Semiconductor.
+	  These chips have a single pin that can be configured as GPIO.
+
 config GPIO_MSIC
 	bool "Intel MSIC mixed signal gpio support"
 	depends on (X86 || COMPILE_TEST) && MFD_INTEL_MSIC

drivers/gpio/Makefile

@@ -80,6 +80,7 @@ obj-$(CONFIG_GPIO_MAX7300)	+= gpio-max7300.o
 obj-$(CONFIG_GPIO_MAX7301)	+= gpio-max7301.o
 obj-$(CONFIG_GPIO_MAX732X)	+= gpio-max732x.o
 obj-$(CONFIG_GPIO_MAX77620)	+= gpio-max77620.o
+obj-$(CONFIG_GPIO_MAX77650)	+= gpio-max77650.o
 obj-$(CONFIG_GPIO_MB86S7X)	+= gpio-mb86s7x.o
 obj-$(CONFIG_GPIO_MENZ127)	+= gpio-menz127.o
 obj-$(CONFIG_GPIO_MERRIFIELD)	+= gpio-merrifield.o

drivers/gpio/gpio-max77650.c

+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2018 BayLibre SAS
+// Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+//
+// GPIO driver for MAXIM 77650/77651 charger/power-supply.
+
+#include <linux/gpio/driver.h>
+#include <linux/i2c.h>
+#include <linux/mfd/max77650.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define MAX77650_GPIO_DIR_MASK		BIT(0)
+#define MAX77650_GPIO_INVAL_MASK	BIT(1)
+#define MAX77650_GPIO_DRV_MASK		BIT(2)
+#define MAX77650_GPIO_OUTVAL_MASK	BIT(3)
+#define MAX77650_GPIO_DEBOUNCE_MASK	BIT(4)
+
+#define MAX77650_GPIO_DIR_OUT		0x00
+#define MAX77650_GPIO_DIR_IN		BIT(0)
+#define MAX77650_GPIO_OUT_LOW		0x00
+#define MAX77650_GPIO_OUT_HIGH		BIT(3)
+#define MAX77650_GPIO_DRV_OPEN_DRAIN	0x00
+#define MAX77650_GPIO_DRV_PUSH_PULL	BIT(2)
+#define MAX77650_GPIO_DEBOUNCE		BIT(4)
+
+#define MAX77650_GPIO_DIR_BITS(_reg) \
+		((_reg) & MAX77650_GPIO_DIR_MASK)
+#define MAX77650_GPIO_INVAL_BITS(_reg) \
+		(((_reg) & MAX77650_GPIO_INVAL_MASK) >> 1)
+
+struct max77650_gpio_chip {
+	struct regmap *map;
+	struct gpio_chip gc;
+	int irq;
+};
+
+static int max77650_gpio_direction_input(struct gpio_chip *gc,
+					 unsigned int offset)
+{
+	struct max77650_gpio_chip *chip = gpiochip_get_data(gc);
+
+	return regmap_update_bits(chip->map,
+				  MAX77650_REG_CNFG_GPIO,
+				  MAX77650_GPIO_DIR_MASK,
+				  MAX77650_GPIO_DIR_IN);
+}
+
+static int max77650_gpio_direction_output(struct gpio_chip *gc,
+					  unsigned int offset, int value)
+{
+	struct max77650_gpio_chip *chip = gpiochip_get_data(gc);
+	int mask, regval;
+
+	mask = MAX77650_GPIO_DIR_MASK | MAX77650_GPIO_OUTVAL_MASK;
+	regval = value ? MAX77650_GPIO_OUT_HIGH : MAX77650_GPIO_OUT_LOW;
+	regval |= MAX77650_GPIO_DIR_OUT;
+
+	return regmap_update_bits(chip->map,
+				  MAX77650_REG_CNFG_GPIO, mask, regval);
+}
+
+static void max77650_gpio_set_value(struct gpio_chip *gc,
+				    unsigned int offset, int value)
+{
+	struct max77650_gpio_chip *chip = gpiochip_get_data(gc);
+	int rv, regval;
+
+	regval = value ? MAX77650_GPIO_OUT_HIGH : MAX77650_GPIO_OUT_LOW;
+
+	rv = regmap_update_bits(chip->map, MAX77650_REG_CNFG_GPIO,
+				MAX77650_GPIO_OUTVAL_MASK, regval);
+	if (rv)
+		dev_err(gc->parent, "cannot set GPIO value: %d\n", rv);
+}
+
+static int max77650_gpio_get_value(struct gpio_chip *gc,
+				   unsigned int offset)
+{
+	struct max77650_gpio_chip *chip = gpiochip_get_data(gc);
+	unsigned int val;
+	int rv;
+
+	rv = regmap_read(chip->map, MAX77650_REG_CNFG_GPIO, &val);
+	if (rv)
+		return rv;
+
+	return MAX77650_GPIO_INVAL_BITS(val);
+}
+
+static int max77650_gpio_get_direction(struct gpio_chip *gc,
+				       unsigned int offset)
+{
+	struct max77650_gpio_chip *chip = gpiochip_get_data(gc);
+	unsigned int val;
+	int rv;
+
+	rv = regmap_read(chip->map, MAX77650_REG_CNFG_GPIO, &val);
+	if (rv)
+		return rv;
+
+	return MAX77650_GPIO_DIR_BITS(val);
+}
+
+static int max77650_gpio_set_config(struct gpio_chip *gc,
+				    unsigned int offset, unsigned long cfg)
+{
+	struct max77650_gpio_chip *chip = gpiochip_get_data(gc);
+
+	switch (pinconf_to_config_param(cfg)) {
+	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+		return regmap_update_bits(chip->map,
+					  MAX77650_REG_CNFG_GPIO,
+					  MAX77650_GPIO_DRV_MASK,
+					  MAX77650_GPIO_DRV_OPEN_DRAIN);
+	case PIN_CONFIG_DRIVE_PUSH_PULL:
+		return regmap_update_bits(chip->map,
+					  MAX77650_REG_CNFG_GPIO,
+					  MAX77650_GPIO_DRV_MASK,
+					  MAX77650_GPIO_DRV_PUSH_PULL);
+	case PIN_CONFIG_INPUT_DEBOUNCE:
+		return regmap_update_bits(chip->map,
+					  MAX77650_REG_CNFG_GPIO,
+					  MAX77650_GPIO_DEBOUNCE_MASK,
+					  MAX77650_GPIO_DEBOUNCE);
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static int max77650_gpio_to_irq(struct gpio_chip *gc, unsigned int offset)
+{
+	struct max77650_gpio_chip *chip = gpiochip_get_data(gc);
+
+	return chip->irq;
+}
+
+static int max77650_gpio_probe(struct platform_device *pdev)
+{
+	struct max77650_gpio_chip *chip;
+	struct device *dev, *parent;
+	struct i2c_client *i2c;
+
+	dev = &pdev->dev;
+	parent = dev->parent;
+	i2c = to_i2c_client(parent);
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->map = dev_get_regmap(parent, NULL);
+	if (!chip->map)
+		return -ENODEV;
+
+	chip->irq = platform_get_irq_byname(pdev, "GPI");
+	if (chip->irq < 0)
+		return chip->irq;
+
+	chip->gc.base = -1;
+	chip->gc.ngpio = 1;
+	chip->gc.label = i2c->name;
+	chip->gc.parent = dev;
+	chip->gc.owner = THIS_MODULE;
+	chip->gc.can_sleep = true;
+
+	chip->gc.direction_input = max77650_gpio_direction_input;
+	chip->gc.direction_output = max77650_gpio_direction_output;
+	chip->gc.set = max77650_gpio_set_value;
+	chip->gc.get = max77650_gpio_get_value;
+	chip->gc.get_direction = max77650_gpio_get_direction;
+	chip->gc.set_config = max77650_gpio_set_config;
+	chip->gc.to_irq = max77650_gpio_to_irq;
+
+	return devm_gpiochip_add_data(dev, &chip->gc, chip);
+}
+
+static struct platform_driver max77650_gpio_driver = {
+	.driver = {
+		.name = "max77650-gpio",
+	},
+	.probe = max77650_gpio_probe,
+};
+module_platform_driver(max77650_gpio_driver);
+
+MODULE_DESCRIPTION("MAXIM 77650/77651 GPIO driver");
+MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
+MODULE_LICENSE("GPL v2");

drivers/input/misc/Kconfig

@@ -190,6 +190,15 @@ config INPUT_M68K_BEEP
 	tristate "M68k Beeper support"
 	depends on M68K
 
+config INPUT_MAX77650_ONKEY
+	tristate "Maxim MAX77650 ONKEY support"
+	depends on MFD_MAX77650
+	help
+	  Support the ONKEY of the MAX77650 PMIC as an input device.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called max77650-onkey.
+
 config INPUT_MAX77693_HAPTIC
 	tristate "MAXIM MAX77693/MAX77843 haptic controller support"
 	depends on (MFD_MAX77693 || MFD_MAX77843) && PWM

drivers/input/misc/Makefile

@@ -44,6 +44,7 @@ obj-$(CONFIG_INPUT_IXP4XX_BEEPER)	+= ixp4xx-beeper.o
 obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
 obj-$(CONFIG_INPUT_KXTJ9)		+= kxtj9.o
 obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68kspkr.o
+obj-$(CONFIG_INPUT_MAX77650_ONKEY)	+= max77650-onkey.o
 obj-$(CONFIG_INPUT_MAX77693_HAPTIC)	+= max77693-haptic.o
 obj-$(CONFIG_INPUT_MAX8925_ONKEY)	+= max8925_onkey.o
 obj-$(CONFIG_INPUT_MAX8997_HAPTIC)	+= max8997_haptic.o

drivers/input/misc/max77650-onkey.c

+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2018 BayLibre SAS
+// Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+//
+// ONKEY driver for MAXIM 77650/77651 charger/power-supply.
+
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/max77650.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define MAX77650_ONKEY_MODE_MASK	BIT(3)
+#define MAX77650_ONKEY_MODE_PUSH	0x00
+#define MAX77650_ONKEY_MODE_SLIDE	BIT(3)
+
+struct max77650_onkey {
+	struct input_dev *input;
+	unsigned int code;
+};
+
+static irqreturn_t max77650_onkey_falling(int irq, void *data)
+{
+	struct max77650_onkey *onkey = data;
+
+	input_report_key(onkey->input, onkey->code, 0);
+	input_sync(onkey->input);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t max77650_onkey_rising(int irq, void *data)
+{
+	struct max77650_onkey *onkey = data;
+
+	input_report_key(onkey->input, onkey->code, 1);
+	input_sync(onkey->input);
+
+	return IRQ_HANDLED;
+}
+
+static int max77650_onkey_probe(struct platform_device *pdev)
+{
+	int irq_r, irq_f, error, mode;
+	struct max77650_onkey *onkey;
+	struct device *dev, *parent;
+	struct regmap *map;
+	unsigned int type;
+
+	dev = &pdev->dev;
+	parent = dev->parent;
+
+	map = dev_get_regmap(parent, NULL);
+	if (!map)
+		return -ENODEV;
+
+	onkey = devm_kzalloc(dev, sizeof(*onkey), GFP_KERNEL);
+	if (!onkey)
+		return -ENOMEM;
+
+	error = device_property_read_u32(dev, "linux,code", &onkey->code);
+	if (error)
+		onkey->code = KEY_POWER;
+
+	if (device_property_read_bool(dev, "maxim,onkey-slide")) {
+		mode = MAX77650_ONKEY_MODE_SLIDE;
+		type = EV_SW;
+	} else {
+		mode = MAX77650_ONKEY_MODE_PUSH;
+		type = EV_KEY;
+	}
+
+	error = regmap_update_bits(map, MAX77650_REG_CNFG_GLBL,
+				   MAX77650_ONKEY_MODE_MASK, mode);
+	if (error)
+		return error;
+
+	irq_f = platform_get_irq_byname(pdev, "nEN_F");
+	if (irq_f < 0)
+		return irq_f;
+
+	irq_r = platform_get_irq_byname(pdev, "nEN_R");
+	if (irq_r < 0)
+		return irq_r;
+
+	onkey->input = devm_input_allocate_device(dev);
+	if (!onkey->input)
+		return -ENOMEM;
+
+	onkey->input->name = "max77650_onkey";
+	onkey->input->phys = "max77650_onkey/input0";
+	onkey->input->id.bustype = BUS_I2C;
+	input_set_capability(onkey->input, type, onkey->code);
+
+	error = devm_request_any_context_irq(dev, irq_f, max77650_onkey_falling,
+					     IRQF_ONESHOT, "onkey-down", onkey);
+	if (error < 0)
+		return error;
+
+	error = devm_request_any_context_irq(dev, irq_r, max77650_onkey_rising,
+					     IRQF_ONESHOT, "onkey-up", onkey);
+	if (error < 0)
+		return error;
+
+	return input_register_device(onkey->input);
+}
+
+static struct platform_driver max77650_onkey_driver = {
+	.driver = {
+		.name = "max77650-onkey",
+	},
+	.probe = max77650_onkey_probe,
+};
+module_platform_driver(max77650_onkey_driver);
+
+MODULE_DESCRIPTION("MAXIM 77650/77651 ONKEY driver");
+MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
+MODULE_LICENSE("GPL v2");

drivers/leds/Kconfig

@@ -619,6 +619,12 @@ config LEDS_TLC591XX
 	  This option enables support for Texas Instruments TLC59108
 	  and TLC59116 LED controllers.
 
+config LEDS_MAX77650
+	tristate "LED support for Maxim MAX77650 PMIC"
+	depends on LEDS_CLASS && MFD_MAX77650
+	help
+	  LEDs driver for MAX77650 family of PMICs from Maxim Integrated.
+
 config LEDS_MAX77693
 	tristate "LED support for MAX77693 Flash"
 	depends on LEDS_CLASS_FLASH

drivers/leds/Makefile

@@ -62,6 +62,7 @@ obj-$(CONFIG_LEDS_MC13783)		+= leds-mc13783.o
 obj-$(CONFIG_LEDS_NS2)			+= leds-ns2.o
 obj-$(CONFIG_LEDS_NETXBIG)		+= leds-netxbig.o
 obj-$(CONFIG_LEDS_ASIC3)		+= leds-asic3.o
+obj-$(CONFIG_LEDS_MAX77650)		+= leds-max77650.o
 obj-$(CONFIG_LEDS_MAX77693)		+= leds-max77693.o
 obj-$(CONFIG_LEDS_MAX8997)		+= leds-max8997.o
 obj-$(CONFIG_LEDS_LM355x)		+= leds-lm355x.o

drivers/leds/leds-max77650.c

+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2018 BayLibre SAS
+// Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+//
+// LED driver for MAXIM 77650/77651 charger/power-supply.
+
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/mfd/max77650.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define MAX77650_LED_NUM_LEDS		3
+
+#define MAX77650_LED_A_BASE		0x40
+#define MAX77650_LED_B_BASE		0x43
+
+#define MAX77650_LED_BR_MASK		GENMASK(4, 0)
+#define MAX77650_LED_EN_MASK		GENMASK(7, 6)
+
+#define MAX77650_LED_MAX_BRIGHTNESS	MAX77650_LED_BR_MASK
+
+/* Enable EN_LED_MSTR. */
+#define MAX77650_LED_TOP_DEFAULT	BIT(0)
+
+#define MAX77650_LED_ENABLE		GENMASK(7, 6)
+#define MAX77650_LED_DISABLE		0x00
+
+#define MAX77650_LED_A_DEFAULT		MAX77650_LED_DISABLE
+/* 100% on duty */
+#define MAX77650_LED_B_DEFAULT		GENMASK(3, 0)
+
+struct max77650_led {
+	struct led_classdev cdev;
+	struct regmap *map;
+	unsigned int regA;
+	unsigned int regB;
+};
+
+static struct max77650_led *max77650_to_led(struct led_classdev *cdev)
+{
+	return container_of(cdev, struct max77650_led, cdev);
+}
+
+static int max77650_led_brightness_set(struct led_classdev *cdev,
+				       enum led_brightness brightness)
+{
+	struct max77650_led *led = max77650_to_led(cdev);
+	int val, mask;
+
+	mask = MAX77650_LED_BR_MASK | MAX77650_LED_EN_MASK;
+
+	if (brightness == LED_OFF)
+		val = MAX77650_LED_DISABLE;
+	else
+		val = MAX77650_LED_ENABLE | brightness;
+
+	return regmap_update_bits(led->map, led->regA, mask, val);
+}
+
+static int max77650_led_probe(struct platform_device *pdev)
+{
+	struct device_node *of_node, *child;
+	struct max77650_led *leds, *led;
+	struct device *parent;
+	struct device *dev;
+	struct regmap *map;
+	const char *label;
+	int rv, num_leds;
+	u32 reg;
+
+	dev = &pdev->dev;
+	parent = dev->parent;
+	of_node = dev->of_node;
+
+	if (!of_node)
+		return -ENODEV;
+
+	leds = devm_kcalloc(dev, sizeof(*leds),
+			    MAX77650_LED_NUM_LEDS, GFP_KERNEL);
+	if (!leds)
+		return -ENOMEM;
+
+	map = dev_get_regmap(dev->parent, NULL);
+	if (!map)
+		return -ENODEV;
+
+	num_leds = of_get_child_count(of_node);
+	if (!num_leds || num_leds > MAX77650_LED_NUM_LEDS)
+		return -ENODEV;
+
+	for_each_child_of_node(of_node, child) {
+		rv = of_property_read_u32(child, "reg", &reg);
+		if (rv || reg >= MAX77650_LED_NUM_LEDS)
+			return -EINVAL;
+
+		led = &leds[reg];
+		led->map = map;
+		led->regA = MAX77650_LED_A_BASE + reg;
+		led->regB = MAX77650_LED_B_BASE + reg;
+		led->cdev.brightness_set_blocking = max77650_led_brightness_set;
+		led->cdev.max_brightness = MAX77650_LED_MAX_BRIGHTNESS;
+
+		label = of_get_property(child, "label", NULL);
+		if (!label) {
+			led->cdev.name = "max77650::";
+		} else {
+			led->cdev.name = devm_kasprintf(dev, GFP_KERNEL,
+							"max77650:%s", label);
+			if (!led->cdev.name)
+				return -ENOMEM;
+		}
+
+		of_property_read_string(child, "linux,default-trigger",
+					&led->cdev.default_trigger);
+
+		rv = devm_of_led_classdev_register(dev, child, &led->cdev);
+		if (rv)
+			return rv;
+
+		rv = regmap_write(map, led->regA, MAX77650_LED_A_DEFAULT);
+		if (rv)
+			return rv;
+
+		rv = regmap_write(map, led->regB, MAX77650_LED_B_DEFAULT);
+		if (rv)
+			return rv;
+	}
+
+	return regmap_write(map,
+			    MAX77650_REG_CNFG_LED_TOP,
+			    MAX77650_LED_TOP_DEFAULT);
+}
+
+static struct platform_driver max77650_led_driver = {
+	.driver = {
+		.name = "max77650-led",
+	},
+	.probe = max77650_led_probe,
+};
+module_platform_driver(max77650_led_driver);
+
+MODULE_DESCRIPTION("MAXIM 77650/77651 LED driver");
+MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
+MODULE_LICENSE("GPL v2");

drivers/mfd/Kconfig

@@ -29,6 +29,16 @@ config MFD_ALTERA_A10SR
 	  accessing the external gpio extender (LEDs & buttons) and
 	  power supply alarms (hwmon).
 
+config MFD_ALTERA_SYSMGR
+	bool "Altera SOCFPGA System Manager"
+	depends on (ARCH_SOCFPGA || ARCH_STRATIX10) && OF
+	select MFD_SYSCON
+	help
+	  Select this to get System Manager support for all Altera branded
+	  SOCFPGAs. The SOCFPGA System Manager handles all SOCFPGAs by
+	  using regmap_mmio accesses for ARM32 parts and SMC calls to
+	  EL3 for ARM64 parts.
+
 config MFD_ACT8945A
 	tristate "Active-semi ACT8945A"
 	select MFD_CORE
@@ -733,6 +743,20 @@ config MFD_MAX77620
 	  provides common support for accessing the device; additional drivers
 	  must be enabled in order to use the functionality of the device.
 
+config MFD_MAX77650
+	tristate "Maxim MAX77650/77651 PMIC Support"
+	depends on I2C
+	depends on OF || COMPILE_TEST
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  Say Y here to add support for Maxim Semiconductor MAX77650 and
+	  MAX77651 Power Management ICs. This is the core multifunction
+	  driver for interacting with the device. The module name is
+	  'max77650'. Additional drivers can be enabled in order to use
+	  the following functionalities of the device: GPIO, regulator,
+	  charger, LED, onkey.
+
 config MFD_MAX77686
 	tristate "Maxim Semiconductor MAX77686/802 PMIC Support"
 	depends on I2C
@@ -1907,6 +1931,19 @@ config MFD_STPMIC1
 	  To compile this driver as a module, choose M here: the
 	  module will be called stpmic1.
 
+config MFD_STMFX
+	tristate "Support for STMicroelectronics Multi-Function eXpander (STMFX)"
+	depends on I2C
+	depends on OF || COMPILE_TEST
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  Support for the STMicroelectronics Multi-Function eXpander.
+
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the functionality
+	  of the device.
+
 menu "Multimedia Capabilities Port drivers"
 	depends on ARCH_SA1100
 

drivers/mfd/Makefile

@@ -155,6 +155,7 @@ obj-$(CONFIG_MFD_DA9150)	+= da9150-core.o
 
 obj-$(CONFIG_MFD_MAX14577)	+= max14577.o
 obj-$(CONFIG_MFD_MAX77620)	+= max77620.o
+obj-$(CONFIG_MFD_MAX77650)	+= max77650.o
 obj-$(CONFIG_MFD_MAX77686)	+= max77686.o
 obj-$(CONFIG_MFD_MAX77693)	+= max77693.o
 obj-$(CONFIG_MFD_MAX77843)	+= max77843.o
@@ -237,6 +238,7 @@ obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI)	+= intel_soc_pmic_chtdc_ti.o
 obj-$(CONFIG_MFD_MT6397)	+= mt6397-core.o
 
 obj-$(CONFIG_MFD_ALTERA_A10SR)	+= altera-a10sr.o
+obj-$(CONFIG_MFD_ALTERA_SYSMGR) += altera-sysmgr.o
 obj-$(CONFIG_MFD_STPMIC1)	+= stpmic1.o
 obj-$(CONFIG_MFD_SUN4I_GPADC)	+= sun4i-gpadc.o
 
@@ -246,4 +248,4 @@ obj-$(CONFIG_MFD_MXS_LRADC)     += mxs-lradc.o
 obj-$(CONFIG_MFD_SC27XX_PMIC)	+= sprd-sc27xx-spi.o
 obj-$(CONFIG_RAVE_SP_CORE)	+= rave-sp.o
 obj-$(CONFIG_MFD_ROHM_BD718XX)	+= rohm-bd718x7.o
-
+obj-$(CONFIG_MFD_STMFX) 	+= stmfx.o

drivers/mfd/ab8500-debugfs.c

@@ -2587,7 +2587,7 @@ static ssize_t ab8500_unsubscribe_write(struct file *file,
 }
 
 /*
- * - several deubgfs nodes fops
+ * - several debugfs nodes fops
  */
 
 static const struct file_operations ab8500_bank_fops = {

drivers/mfd/altera-sysmgr.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2018-2019, Intel Corporation.
+ *  Copyright (C) 2012 Freescale Semiconductor, Inc.
+ *  Copyright (C) 2012 Linaro Ltd.
+ *
+ *  Based on syscon driver.
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/mfd/altera-sysmgr.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+/**
+ * struct altr_sysmgr - Altera SOCFPGA System Manager
+ * @regmap: the regmap used for System Manager accesses.
+ * @base  : the base address for the System Manager
+ */
+struct altr_sysmgr {
+	struct regmap   *regmap;
+	resource_size_t *base;
+};
+
+static struct platform_driver altr_sysmgr_driver;
+
+/**
+ * s10_protected_reg_write
+ * Write to a protected SMC register.
+ * @base: Base address of System Manager
+ * @reg:  Address offset of register
+ * @val:  Value to write
+ * Return: INTEL_SIP_SMC_STATUS_OK (0) on success
+ *	   INTEL_SIP_SMC_REG_ERROR on error
+ *	   INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION if not supported
+ */
+static int s10_protected_reg_write(void *base,
+				   unsigned int reg, unsigned int val)
+{
+	struct arm_smccc_res result;
+	unsigned long sysmgr_base = (unsigned long)base;
+
+	arm_smccc_smc(INTEL_SIP_SMC_REG_WRITE, sysmgr_base + reg,
+		      val, 0, 0, 0, 0, 0, &result);
+
+	return (int)result.a0;
+}
+
+/**
+ * s10_protected_reg_read
+ * Read the status of a protected SMC register
+ * @base: Base address of System Manager.
+ * @reg:  Address of register
+ * @val:  Value read.
+ * Return: INTEL_SIP_SMC_STATUS_OK (0) on success
+ *	   INTEL_SIP_SMC_REG_ERROR on error
+ *	   INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION if not supported
+ */
+static int s10_protected_reg_read(void *base,
+				  unsigned int reg, unsigned int *val)
+{
+	struct arm_smccc_res result;
+	unsigned long sysmgr_base = (unsigned long)base;
+
+	arm_smccc_smc(INTEL_SIP_SMC_REG_READ, sysmgr_base + reg,
+		      0, 0, 0, 0, 0, 0, &result);
+
+	*val = (unsigned int)result.a1;
+
+	return (int)result.a0;
+}
+
+static struct regmap_config altr_sysmgr_regmap_cfg = {
+	.name = "altr_sysmgr",
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.fast_io = true,
+	.use_single_read = true,
+	.use_single_write = true,
+};
+
+/**
+ * sysmgr_match_phandle
+ * Matching function used by driver_find_device().
+ * Return: True if match is found, otherwise false.
+ */
+static int sysmgr_match_phandle(struct device *dev, void *data)
+{
+	return dev->of_node == (struct device_node *)data;
+}
+
+/**
+ * altr_sysmgr_regmap_lookup_by_phandle
+ * Find the sysmgr previous configured in probe() and return regmap property.
+ * Return: regmap if found or error if not found.
+ */
+struct regmap *altr_sysmgr_regmap_lookup_by_phandle(struct device_node *np,
+						    const char *property)
+{
+	struct device *dev;
+	struct altr_sysmgr *sysmgr;
+	struct device_node *sysmgr_np;
+
+	if (property)
+		sysmgr_np = of_parse_phandle(np, property, 0);
+	else
+		sysmgr_np = np;
+
+	if (!sysmgr_np)
+		return ERR_PTR(-ENODEV);
+
+	dev = driver_find_device(&altr_sysmgr_driver.driver, NULL,
+				 (void *)sysmgr_np, sysmgr_match_phandle);
+	of_node_put(sysmgr_np);
+	if (!dev)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	sysmgr = dev_get_drvdata(dev);
+
+	return sysmgr->regmap;
+}
+EXPORT_SYMBOL_GPL(altr_sysmgr_regmap_lookup_by_phandle);
+
+static int sysmgr_probe(struct platform_device *pdev)
+{
+	struct altr_sysmgr *sysmgr;
+	struct regmap *regmap;
+	struct resource *res;
+	struct regmap_config sysmgr_config = altr_sysmgr_regmap_cfg;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+
+	sysmgr = devm_kzalloc(dev, sizeof(*sysmgr), GFP_KERNEL);
+	if (!sysmgr)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENOENT;
+
+	sysmgr_config.max_register = resource_size(res) -
+				     sysmgr_config.reg_stride;
+	if (of_device_is_compatible(np, "altr,sys-mgr-s10")) {
+		/* Need physical address for SMCC call */
+		sysmgr->base = (resource_size_t *)res->start;
+		sysmgr_config.reg_read = s10_protected_reg_read;
+		sysmgr_config.reg_write = s10_protected_reg_write;
+
+		regmap = devm_regmap_init(dev, NULL, sysmgr->base,
+					  &sysmgr_config);
+	} else {
+		sysmgr->base = devm_ioremap(dev, res->start,
+					    resource_size(res));
+		if (!sysmgr->base)
+			return -ENOMEM;
+
+		sysmgr_config.max_register = res->end - res->start - 3;
+		regmap = devm_regmap_init_mmio(dev, sysmgr->base,
+					       &sysmgr_config);
+	}
+
+	if (IS_ERR(regmap)) {
+		pr_err("regmap init failed\n");
+		return PTR_ERR(regmap);
+	}
+
+	sysmgr->regmap = regmap;
+
+	platform_set_drvdata(pdev, sysmgr);
+
+	return 0;
+}
+
+static const struct of_device_id altr_sysmgr_of_match[] = {
+	{ .compatible = "altr,sys-mgr" },
+	{ .compatible = "altr,sys-mgr-s10" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, altr_sysmgr_of_match);
+
+static struct platform_driver altr_sysmgr_driver = {
+	.probe =  sysmgr_probe,
+	.driver = {
+		.name = "altr,system_manager",
+		.of_match_table = altr_sysmgr_of_match,
+	},
+};
+
+static int __init altr_sysmgr_init(void)
+{
+	return platform_driver_register(&altr_sysmgr_driver);
+}
+core_initcall(altr_sysmgr_init);
+
+static void __exit altr_sysmgr_exit(void)
+{
+	platform_driver_unregister(&altr_sysmgr_driver);
+}
+module_exit(altr_sysmgr_exit);
+
+MODULE_AUTHOR("Thor Thayer <>");
+MODULE_DESCRIPTION("SOCFPGA System Manager driver");
+MODULE_LICENSE("GPL v2");

drivers/mfd/atmel-hlcdc.c

@@ -141,6 +141,7 @@ static const struct of_device_id atmel_hlcdc_match[] = {
 	{ .compatible = "atmel,sama5d2-hlcdc" },
 	{ .compatible = "atmel,sama5d3-hlcdc" },
 	{ .compatible = "atmel,sama5d4-hlcdc" },
+	{ .compatible = "microchip,sam9x60-hlcdc" },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, atmel_hlcdc_match);

drivers/mfd/axp20x-i2c.c

@@ -65,6 +65,7 @@ static const struct of_device_id axp20x_i2c_of_match[] = {
 	{ .compatible = "x-powers,axp202", .data = (void *)AXP202_ID },
 	{ .compatible = "x-powers,axp209", .data = (void *)AXP209_ID },
 	{ .compatible = "x-powers,axp221", .data = (void *)AXP221_ID },
+	{ .compatible = "x-powers,axp223", .data = (void *)AXP223_ID },
 	{ .compatible = "x-powers,axp806", .data = (void *)AXP806_ID },
 	{ },
 };
@@ -75,6 +76,7 @@ static const struct i2c_device_id axp20x_i2c_id[] = {
 	{ "axp202", 0 },
 	{ "axp209", 0 },
 	{ "axp221", 0 },
+	{ "axp223", 0 },
 	{ "axp806", 0 },
 	{ },
 };

drivers/mfd/axp20x.c

@@ -198,6 +198,12 @@ static const struct resource axp22x_usb_power_supply_resources[] = {
 	DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"),
 };
 
+/* AXP803 and AXP813/AXP818 share the same interrupts */
+static const struct resource axp803_usb_power_supply_resources[] = {
+	DEFINE_RES_IRQ_NAMED(AXP803_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"),
+	DEFINE_RES_IRQ_NAMED(AXP803_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"),
+};
+
 static const struct resource axp22x_pek_resources[] = {
 	DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
 	DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
@@ -741,6 +747,11 @@ static const struct mfd_cell axp803_cells[] = {
 		.of_compatible	= "x-powers,axp813-ac-power-supply",
 		.num_resources	= ARRAY_SIZE(axp20x_ac_power_supply_resources),
 		.resources	= axp20x_ac_power_supply_resources,
+	}, {
+		.name		= "axp20x-usb-power-supply",
+		.num_resources	= ARRAY_SIZE(axp803_usb_power_supply_resources),
+		.resources	= axp803_usb_power_supply_resources,
+		.of_compatible	= "x-powers,axp813-usb-power-supply",
 	},
 	{	.name		= "axp20x-regulator" },
 };
@@ -793,6 +804,11 @@ static const struct mfd_cell axp813_cells[] = {
 		.of_compatible	= "x-powers,axp813-ac-power-supply",
 		.num_resources	= ARRAY_SIZE(axp20x_ac_power_supply_resources),
 		.resources	= axp20x_ac_power_supply_resources,
+	}, {
+		.name		= "axp20x-usb-power-supply",
+		.num_resources	= ARRAY_SIZE(axp803_usb_power_supply_resources),
+		.resources	= axp803_usb_power_supply_resources,
+		.of_compatible	= "x-powers,axp813-usb-power-supply",
 	},
 };
 

drivers/mfd/cros_ec.c

@@ -75,20 +75,49 @@ static irqreturn_t ec_irq_thread(int irq, void *data)
 
 static int cros_ec_sleep_event(struct cros_ec_device *ec_dev, u8 sleep_event)
 {
+	int ret;
 	struct {
 		struct cros_ec_command msg;
-		struct ec_params_host_sleep_event req;
+		union {
+			struct ec_params_host_sleep_event req0;
+			struct ec_params_host_sleep_event_v1 req1;
+			struct ec_response_host_sleep_event_v1 resp1;
+		} u;
 	} __packed buf;
 
 	memset(&buf, 0, sizeof(buf));
 
-	buf.req.sleep_event = sleep_event;
+	if (ec_dev->host_sleep_v1) {
+		buf.u.req1.sleep_event = sleep_event;
+		buf.u.req1.suspend_params.sleep_timeout_ms =
+				EC_HOST_SLEEP_TIMEOUT_DEFAULT;
+
+		buf.msg.outsize = sizeof(buf.u.req1);
+		if ((sleep_event == HOST_SLEEP_EVENT_S3_RESUME) ||
+		    (sleep_event == HOST_SLEEP_EVENT_S0IX_RESUME))
+			buf.msg.insize = sizeof(buf.u.resp1);
+
+		buf.msg.version = 1;
+
+	} else {
+		buf.u.req0.sleep_event = sleep_event;
+		buf.msg.outsize = sizeof(buf.u.req0);
+	}
 
 	buf.msg.command = EC_CMD_HOST_SLEEP_EVENT;
-	buf.msg.version = 0;
-	buf.msg.outsize = sizeof(buf.req);
 
-	return cros_ec_cmd_xfer(ec_dev, &buf.msg);
+	ret = cros_ec_cmd_xfer(ec_dev, &buf.msg);
+
+	/* For now, report failure to transition to S0ix with a warning. */
+	if (ret >= 0 && ec_dev->host_sleep_v1 &&
+	    (sleep_event == HOST_SLEEP_EVENT_S0IX_RESUME))
+		WARN_ONCE(buf.u.resp1.resume_response.sleep_transitions &
+			  EC_HOST_RESUME_SLEEP_TIMEOUT,
+			  "EC detected sleep transition timeout. Total slp_s0 transitions: %d",
+			  buf.u.resp1.resume_response.sleep_transitions &
+			  EC_HOST_RESUME_SLEEP_TRANSITIONS_MASK);
+
+	return ret;
 }
 
 int cros_ec_register(struct cros_ec_device *ec_dev)

drivers/mfd/cros_ec_dev.c

@@ -385,7 +385,8 @@ static const struct mfd_cell cros_ec_rtc_cells[] = {
 };
 
 static const struct mfd_cell cros_usbpd_charger_cells[] = {
-	{ .name = "cros-usbpd-charger" }
+	{ .name = "cros-usbpd-charger" },
+	{ .name = "cros-usbpd-logger" },
 };
 
 static const struct mfd_cell cros_ec_platform_cells[] = {
@@ -418,6 +419,39 @@ static int ec_device_probe(struct platform_device *pdev)
 	device_initialize(&ec->class_dev);
 	cdev_init(&ec->cdev, &fops);
 
+	/* Check whether this is actually a Fingerprint MCU rather than an EC */
+	if (cros_ec_check_features(ec, EC_FEATURE_FINGERPRINT)) {
+		dev_info(dev, "CrOS Fingerprint MCU detected.\n");
+		/*
+		 * Help userspace differentiating ECs from FP MCU,
+		 * regardless of the probing order.
+		 */
+		ec_platform->ec_name = CROS_EC_DEV_FP_NAME;
+	}
+
+	/*
+	 * Check whether this is actually an Integrated Sensor Hub (ISH)
+	 * rather than an EC.
+	 */
+	if (cros_ec_check_features(ec, EC_FEATURE_ISH)) {
+		dev_info(dev, "CrOS ISH MCU detected.\n");
+		/*
+		 * Help userspace differentiating ECs from ISH MCU,
+		 * regardless of the probing order.
+		 */
+		ec_platform->ec_name = CROS_EC_DEV_ISH_NAME;
+	}
+
+	/* Check whether this is actually a Touchpad MCU rather than an EC */
+	if (cros_ec_check_features(ec, EC_FEATURE_TOUCHPAD)) {
+		dev_info(dev, "CrOS Touchpad MCU detected.\n");
+		/*
+		 * Help userspace differentiating ECs from TP MCU,
+		 * regardless of the probing order.
+		 */
+		ec_platform->ec_name = CROS_EC_DEV_TP_NAME;
+	}
+
 	/*
 	 * Add the class device
 	 * Link to the character device for creating the /dev entry

drivers/mfd/cs47l35-tables.c

@@ -178,6 +178,7 @@ static const struct reg_default cs47l35_reg_default[] = {
 	{ 0x00000448, 0x0a83 }, /* R1096 (0x448) - eDRE Enable */
 	{ 0x0000044a, 0x0000 }, /* R1098 (0x44a) - eDRE Manual */
 	{ 0x00000450, 0x0000 }, /* R1104 (0x450) - DAC AEC Control 1 */
+	{ 0x00000451, 0x0000 }, /* R1105 (0x451) - DAC AEC Control 2 */
 	{ 0x00000458, 0x0000 }, /* R1112 (0x458) - Noise Gate Control */
 	{ 0x00000490, 0x0069 }, /* R1168 (0x490) - PDM SPK1 CTRL 1 */
 	{ 0x00000491, 0x0000 }, /* R1169 (0x491) - PDM SPK1 CTRL 2 */
@@ -970,6 +971,7 @@ static bool cs47l35_16bit_readable_register(struct device *dev,
 	case MADERA_EDRE_ENABLE:
 	case MADERA_EDRE_MANUAL:
 	case MADERA_DAC_AEC_CONTROL_1:
+	case MADERA_DAC_AEC_CONTROL_2:
 	case MADERA_NOISE_GATE_CONTROL:
 	case MADERA_PDM_SPK1_CTRL_1:
 	case MADERA_PDM_SPK1_CTRL_2:

drivers/mfd/cs47l90-tables.c

@@ -263,6 +263,7 @@ static const struct reg_default cs47l90_reg_default[] = {
 	{ 0x00000440, 0x003f }, /* R1088 (0x440) - DRE Enable */
 	{ 0x00000448, 0x003f }, /* R1096 (0x448) - eDRE Enable */
 	{ 0x00000450, 0x0000 }, /* R1104 (0x450) - DAC AEC Control 1 */
+	{ 0x00000451, 0x0000 }, /* R1104 (0x450) - DAC AEC Control 2 */
 	{ 0x00000458, 0x0000 }, /* R1112 (0x458) - Noise Gate Control */
 	{ 0x00000490, 0x0069 }, /* R1168 (0x490) - PDM SPK1 CTRL 1 */
 	{ 0x00000491, 0x0000 }, /* R1169 (0x491) - PDM SPK1 CTRL 2 */
@@ -1692,6 +1693,7 @@ static bool cs47l90_16bit_readable_register(struct device *dev,
 	case MADERA_DRE_ENABLE:
 	case MADERA_EDRE_ENABLE:
 	case MADERA_DAC_AEC_CONTROL_1:
+	case MADERA_DAC_AEC_CONTROL_2:
 	case MADERA_NOISE_GATE_CONTROL:
 	case MADERA_PDM_SPK1_CTRL_1:
 	case MADERA_PDM_SPK1_CTRL_2:

drivers/mfd/da9063-core.c

+// SPDX-License-Identifier: GPL-2.0+
 /*
- * da9063-core.c: Device access for Dialog DA9063 modules
+ * Device access for Dialog DA9063 modules
  *
  * Copyright 2012 Dialog Semiconductors Ltd.
  * Copyright 2013 Philipp Zabel, Pengutronix
@@ -7,11 +8,6 @@
  * Author: Krystian Garbaciak, Dialog Semiconductor
  * Author: Michal Hajduk, Dialog Semiconductor
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
  */
 
 #include <linux/kernel.h>
@@ -26,7 +22,6 @@
 #include <linux/regmap.h>
 
 #include <linux/mfd/da9063/core.h>
-#include <linux/mfd/da9063/pdata.h>
 #include <linux/mfd/da9063/registers.h>
 
 #include <linux/proc_fs.h>
@@ -165,7 +160,6 @@ static int da9063_clear_fault_log(struct da9063 *da9063)
 
 int da9063_device_init(struct da9063 *da9063, unsigned int irq)
 {
-	struct da9063_pdata *pdata = da9063->dev->platform_data;
 	int model, variant_id, variant_code;
 	int ret;
 
@@ -173,24 +167,10 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq)
 	if (ret < 0)
 		dev_err(da9063->dev, "Cannot clear fault log\n");
 
-	if (pdata) {
-		da9063->flags = pdata->flags;
-		da9063->irq_base = pdata->irq_base;
-	} else {
 	da9063->flags = 0;
 	da9063->irq_base = -1;
-	}
 	da9063->chip_irq = irq;
 
-	if (pdata && pdata->init != NULL) {
-		ret = pdata->init(da9063);
-		if (ret != 0) {
-			dev_err(da9063->dev,
-				"Platform initialization failed.\n");
-			return ret;
-		}
-	}
-
 	ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_ID, &model);
 	if (ret < 0) {
 		dev_err(da9063->dev, "Cannot read chip model id.\n");

drivers/mfd/da9063-i2c.c

-/* da9063-i2c.c: Interrupt support for Dialog DA9063
+// SPDX-License-Identifier: GPL-2.0+
+/* I2C support for Dialog DA9063
  *
  * Copyright 2012 Dialog Semiconductor Ltd.
  * Copyright 2013 Philipp Zabel, Pengutronix
  *
  * Author: Krystian Garbaciak, Dialog Semiconductor
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
  */
 
 #include <linux/kernel.h>
@@ -22,7 +17,6 @@
 
 #include <linux/mfd/core.h>
 #include <linux/mfd/da9063/core.h>
-#include <linux/mfd/da9063/pdata.h>
 #include <linux/mfd/da9063/registers.h>
 
 #include <linux/of.h>

drivers/mfd/da9063-irq.c

-/* da9063-irq.c: Interrupts support for Dialog DA9063
+// SPDX-License-Identifier: GPL-2.0+
+/* Interrupt support for Dialog DA9063
  *
  * Copyright 2012 Dialog Semiconductor Ltd.
  * Copyright 2013 Philipp Zabel, Pengutronix
  *
  * Author: Michal Hajduk, Dialog Semiconductor
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
  */
 
 #include <linux/kernel.h>
@@ -19,7 +14,6 @@
 #include <linux/interrupt.h>
 #include <linux/regmap.h>
 #include <linux/mfd/da9063/core.h>
-#include <linux/mfd/da9063/pdata.h>
 
 #define	DA9063_REG_EVENT_A_OFFSET	0
 #define	DA9063_REG_EVENT_B_OFFSET	1

drivers/mfd/intel-lpss-pci.c

@@ -129,6 +129,19 @@ static const struct intel_lpss_platform_info cnl_i2c_info = {
 };
 
 static const struct pci_device_id intel_lpss_pci_ids[] = {
+	/* CML */
+	{ PCI_VDEVICE(INTEL, 0x02a8), (kernel_ulong_t)&spt_uart_info },
+	{ PCI_VDEVICE(INTEL, 0x02a9), (kernel_ulong_t)&spt_uart_info },
+	{ PCI_VDEVICE(INTEL, 0x02aa), (kernel_ulong_t)&spt_info },
+	{ PCI_VDEVICE(INTEL, 0x02ab), (kernel_ulong_t)&spt_info },
+	{ PCI_VDEVICE(INTEL, 0x02c5), (kernel_ulong_t)&cnl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x02c6), (kernel_ulong_t)&cnl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x02c7), (kernel_ulong_t)&spt_uart_info },
+	{ PCI_VDEVICE(INTEL, 0x02e8), (kernel_ulong_t)&cnl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x02e9), (kernel_ulong_t)&cnl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x02ea), (kernel_ulong_t)&cnl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x02eb), (kernel_ulong_t)&cnl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x02fb), (kernel_ulong_t)&spt_info },
 	/* BXT A-Step */
 	{ PCI_VDEVICE(INTEL, 0x0aac), (kernel_ulong_t)&bxt_i2c_info },
 	{ PCI_VDEVICE(INTEL, 0x0aae), (kernel_ulong_t)&bxt_i2c_info },

drivers/mfd/intel-lpss.c

@@ -273,6 +273,9 @@ static void intel_lpss_init_dev(const struct intel_lpss *lpss)
 {
 	u32 value = LPSS_PRIV_SSP_REG_DIS_DMA_FIN;
 
+	/* Set the device in reset state */
+	writel(0, lpss->priv + LPSS_PRIV_RESETS);
+
 	intel_lpss_deassert_reset(lpss);
 
 	intel_lpss_set_remap_addr(lpss);

drivers/mfd/intel_quark_i2c_gpio.c

@@ -74,16 +74,6 @@ static const struct dmi_system_id dmi_platform_info[] = {
 	{
 		.matches = {
 			DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"),
-			DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG,
-					"6ES7647-0AA00-0YA2"),
-		},
-		.driver_data = (void *)400000,
-	},
-	{
-		.matches = {
-			DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"),
-			DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG,
-					"6ES7647-0AA00-1YA2"),
 		},
 		.driver_data = (void *)400000,
 	},

drivers/mfd/intel_soc_pmic_chtwc.c

@@ -60,6 +60,7 @@ static struct mfd_cell cht_wc_dev[] = {
 		.resources = cht_wc_ext_charger_resources,
 	},
 	{	.name = "cht_wcove_region", },
+	{	.name = "cht_wcove_leds", },
 };
 
 /*

drivers/mfd/max77620.c

@@ -37,6 +37,8 @@
 #include <linux/regmap.h>
 #include <linux/slab.h>
 
+static struct max77620_chip *max77620_scratch;
+
 static const struct resource gpio_resources[] = {
 	DEFINE_RES_IRQ(MAX77620_IRQ_TOP_GPIO),
 };
@@ -111,6 +113,26 @@ static const struct mfd_cell max20024_children[] = {
 	},
 };
 
+static const struct mfd_cell max77663_children[] = {
+	{ .name = "max77620-pinctrl", },
+	{ .name = "max77620-clock", },
+	{ .name = "max77663-pmic", },
+	{ .name = "max77620-watchdog", },
+	{
+		.name = "max77620-gpio",
+		.resources = gpio_resources,
+		.num_resources = ARRAY_SIZE(gpio_resources),
+	}, {
+		.name = "max77620-rtc",
+		.resources = rtc_resources,
+		.num_resources = ARRAY_SIZE(rtc_resources),
+	}, {
+		.name = "max77663-power",
+		.resources = power_resources,
+		.num_resources = ARRAY_SIZE(power_resources),
+	},
+};
+
 static const struct regmap_range max77620_readable_ranges[] = {
 	regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4),
 };
@@ -171,6 +193,35 @@ static const struct regmap_config max20024_regmap_config = {
 	.volatile_table = &max77620_volatile_table,
 };
 
+static const struct regmap_range max77663_readable_ranges[] = {
+	regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_CID5),
+};
+
+static const struct regmap_access_table max77663_readable_table = {
+	.yes_ranges = max77663_readable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(max77663_readable_ranges),
+};
+
+static const struct regmap_range max77663_writable_ranges[] = {
+	regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_CID5),
+};
+
+static const struct regmap_access_table max77663_writable_table = {
+	.yes_ranges = max77663_writable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(max77663_writable_ranges),
+};
+
+static const struct regmap_config max77663_regmap_config = {
+	.name = "power-slave",
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = MAX77620_REG_CID5 + 1,
+	.cache_type = REGCACHE_RBTREE,
+	.rd_table = &max77663_readable_table,
+	.wr_table = &max77663_writable_table,
+	.volatile_table = &max77620_volatile_table,
+};
+
 /*
  * MAX77620 and MAX20024 has the following steps of the interrupt handling
  * for TOP interrupts:
@@ -240,6 +291,9 @@ static int max77620_get_fps_period_reg_value(struct max77620_chip *chip,
 	case MAX77620:
 		fps_min_period = MAX77620_FPS_PERIOD_MIN_US;
 		break;
+	case MAX77663:
+		fps_min_period = MAX20024_FPS_PERIOD_MIN_US;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -274,6 +328,9 @@ static int max77620_config_fps(struct max77620_chip *chip,
 	case MAX77620:
 		fps_max_period = MAX77620_FPS_PERIOD_MAX_US;
 		break;
+	case MAX77663:
+		fps_max_period = MAX20024_FPS_PERIOD_MAX_US;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -375,6 +432,9 @@ static int max77620_initialise_fps(struct max77620_chip *chip)
 	}
 
 skip_fps:
+	if (chip->chip_id == MAX77663)
+		return 0;
+
 	/* Enable wake on EN0 pin */
 	ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
 				 MAX77620_ONOFFCNFG2_WK_EN0,
@@ -423,6 +483,15 @@ static int max77620_read_es_version(struct max77620_chip *chip)
 	return ret;
 }
 
+static void max77620_pm_power_off(void)
+{
+	struct max77620_chip *chip = max77620_scratch;
+
+	regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG1,
+			   MAX77620_ONOFFCNFG1_SFT_RST,
+			   MAX77620_ONOFFCNFG1_SFT_RST);
+}
+
 static int max77620_probe(struct i2c_client *client,
 			  const struct i2c_device_id *id)
 {
@@ -430,6 +499,7 @@ static int max77620_probe(struct i2c_client *client,
 	struct max77620_chip *chip;
 	const struct mfd_cell *mfd_cells;
 	int n_mfd_cells;
+	bool pm_off;
 	int ret;
 
 	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
@@ -453,6 +523,11 @@ static int max77620_probe(struct i2c_client *client,
 		n_mfd_cells = ARRAY_SIZE(max20024_children);
 		rmap_config = &max20024_regmap_config;
 		break;
+	case MAX77663:
+		mfd_cells = max77663_children;
+		n_mfd_cells = ARRAY_SIZE(max77663_children);
+		rmap_config = &max77663_regmap_config;
+		break;
 	default:
 		dev_err(chip->dev, "ChipID is invalid %d\n", chip->chip_id);
 		return -EINVAL;
@@ -491,6 +566,12 @@ static int max77620_probe(struct i2c_client *client,
 		return ret;
 	}
 
+	pm_off = of_device_is_system_power_controller(client->dev.of_node);
+	if (pm_off && !pm_power_off) {
+		max77620_scratch = chip;
+		pm_power_off = max77620_pm_power_off;
+	}
+
 	return 0;
 }
 
@@ -546,6 +627,9 @@ static int max77620_i2c_suspend(struct device *dev)
 		return ret;
 	}
 
+	if (chip->chip_id == MAX77663)
+		goto out;
+
 	/* Disable WK_EN0 */
 	ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
 				 MAX77620_ONOFFCNFG2_WK_EN0, 0);
@@ -581,7 +665,7 @@ static int max77620_i2c_resume(struct device *dev)
 	 * For MAX20024: No need to configure WKEN0 on resume as
 	 * it is configured on Init.
 	 */
-	if (chip->chip_id == MAX20024)
+	if (chip->chip_id == MAX20024 || chip->chip_id == MAX77663)
 		goto out;
 
 	/* Enable WK_EN0 */
@@ -603,6 +687,7 @@ static int max77620_i2c_resume(struct device *dev)
 static const struct i2c_device_id max77620_id[] = {
 	{"max77620", MAX77620},
 	{"max20024", MAX20024},
+	{"max77663", MAX77663},
 	{},
 };
 

drivers/mfd/max77650.c

+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2018 BayLibre SAS
+// Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+//
+// Core MFD driver for MAXIM 77650/77651 charger/power-supply.
+// Programming manual: https://pdfserv.maximintegrated.com/en/an/AN6428.pdf
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max77650.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+#define MAX77650_INT_GPI_F_MSK		BIT(0)
+#define MAX77650_INT_GPI_R_MSK		BIT(1)
+#define MAX77650_INT_GPI_MSK \
+			(MAX77650_INT_GPI_F_MSK | MAX77650_INT_GPI_R_MSK)
+#define MAX77650_INT_nEN_F_MSK		BIT(2)
+#define MAX77650_INT_nEN_R_MSK		BIT(3)
+#define MAX77650_INT_TJAL1_R_MSK	BIT(4)
+#define MAX77650_INT_TJAL2_R_MSK	BIT(5)
+#define MAX77650_INT_DOD_R_MSK		BIT(6)
+
+#define MAX77650_INT_THM_MSK		BIT(0)
+#define MAX77650_INT_CHG_MSK		BIT(1)
+#define MAX77650_INT_CHGIN_MSK		BIT(2)
+#define MAX77650_INT_TJ_REG_MSK		BIT(3)
+#define MAX77650_INT_CHGIN_CTRL_MSK	BIT(4)
+#define MAX77650_INT_SYS_CTRL_MSK	BIT(5)
+#define MAX77650_INT_SYS_CNFG_MSK	BIT(6)
+
+#define MAX77650_INT_GLBL_OFFSET	0
+#define MAX77650_INT_CHG_OFFSET		1
+
+#define MAX77650_SBIA_LPM_MASK		BIT(5)
+#define MAX77650_SBIA_LPM_DISABLED	0x00
+
+enum {
+	MAX77650_INT_GPI,
+	MAX77650_INT_nEN_F,
+	MAX77650_INT_nEN_R,
+	MAX77650_INT_TJAL1_R,
+	MAX77650_INT_TJAL2_R,
+	MAX77650_INT_DOD_R,
+	MAX77650_INT_THM,
+	MAX77650_INT_CHG,
+	MAX77650_INT_CHGIN,
+	MAX77650_INT_TJ_REG,
+	MAX77650_INT_CHGIN_CTRL,
+	MAX77650_INT_SYS_CTRL,
+	MAX77650_INT_SYS_CNFG,
+};
+
+static const struct resource max77650_charger_resources[] = {
+	DEFINE_RES_IRQ_NAMED(MAX77650_INT_CHG, "CHG"),
+	DEFINE_RES_IRQ_NAMED(MAX77650_INT_CHGIN, "CHGIN"),
+};
+
+static const struct resource max77650_gpio_resources[] = {
+	DEFINE_RES_IRQ_NAMED(MAX77650_INT_GPI, "GPI"),
+};
+
+static const struct resource max77650_onkey_resources[] = {
+	DEFINE_RES_IRQ_NAMED(MAX77650_INT_nEN_F, "nEN_F"),
+	DEFINE_RES_IRQ_NAMED(MAX77650_INT_nEN_R, "nEN_R"),
+};
+
+static const struct mfd_cell max77650_cells[] = {
+	{
+		.name		= "max77650-regulator",
+		.of_compatible	= "maxim,max77650-regulator",
+	}, {
+		.name		= "max77650-charger",
+		.of_compatible	= "maxim,max77650-charger",
+		.resources	= max77650_charger_resources,
+		.num_resources	= ARRAY_SIZE(max77650_charger_resources),
+	}, {
+		.name		= "max77650-gpio",
+		.of_compatible	= "maxim,max77650-gpio",
+		.resources	= max77650_gpio_resources,
+		.num_resources	= ARRAY_SIZE(max77650_gpio_resources),
+	}, {
+		.name		= "max77650-led",
+		.of_compatible	= "maxim,max77650-led",
+	}, {
+		.name		= "max77650-onkey",
+		.of_compatible	= "maxim,max77650-onkey",
+		.resources	= max77650_onkey_resources,
+		.num_resources	= ARRAY_SIZE(max77650_onkey_resources),
+	},
+};
+
+static const struct regmap_irq max77650_irqs[] = {
+	[MAX77650_INT_GPI] = {
+		.reg_offset = MAX77650_INT_GLBL_OFFSET,
+		.mask = MAX77650_INT_GPI_MSK,
+		.type = {
+			.type_falling_val = MAX77650_INT_GPI_F_MSK,
+			.type_rising_val = MAX77650_INT_GPI_R_MSK,
+			.types_supported = IRQ_TYPE_EDGE_BOTH,
+		},
+	},
+	REGMAP_IRQ_REG(MAX77650_INT_nEN_F,
+		       MAX77650_INT_GLBL_OFFSET, MAX77650_INT_nEN_F_MSK),
+	REGMAP_IRQ_REG(MAX77650_INT_nEN_R,
+		       MAX77650_INT_GLBL_OFFSET, MAX77650_INT_nEN_R_MSK),
+	REGMAP_IRQ_REG(MAX77650_INT_TJAL1_R,
+		       MAX77650_INT_GLBL_OFFSET, MAX77650_INT_TJAL1_R_MSK),
+	REGMAP_IRQ_REG(MAX77650_INT_TJAL2_R,
+		       MAX77650_INT_GLBL_OFFSET, MAX77650_INT_TJAL2_R_MSK),
+	REGMAP_IRQ_REG(MAX77650_INT_DOD_R,
+		       MAX77650_INT_GLBL_OFFSET, MAX77650_INT_DOD_R_MSK),
+	REGMAP_IRQ_REG(MAX77650_INT_THM,
+		       MAX77650_INT_CHG_OFFSET, MAX77650_INT_THM_MSK),
+	REGMAP_IRQ_REG(MAX77650_INT_CHG,
+		       MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHG_MSK),
+	REGMAP_IRQ_REG(MAX77650_INT_CHGIN,
+		       MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHGIN_MSK),
+	REGMAP_IRQ_REG(MAX77650_INT_TJ_REG,
+		       MAX77650_INT_CHG_OFFSET, MAX77650_INT_TJ_REG_MSK),
+	REGMAP_IRQ_REG(MAX77650_INT_CHGIN_CTRL,
+		       MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHGIN_CTRL_MSK),
+	REGMAP_IRQ_REG(MAX77650_INT_SYS_CTRL,
+		       MAX77650_INT_CHG_OFFSET, MAX77650_INT_SYS_CTRL_MSK),
+	REGMAP_IRQ_REG(MAX77650_INT_SYS_CNFG,
+		       MAX77650_INT_CHG_OFFSET, MAX77650_INT_SYS_CNFG_MSK),
+};
+
+static const struct regmap_irq_chip max77650_irq_chip = {
+	.name			= "max77650-irq",
+	.irqs			= max77650_irqs,
+	.num_irqs		= ARRAY_SIZE(max77650_irqs),
+	.num_regs		= 2,
+	.status_base		= MAX77650_REG_INT_GLBL,
+	.mask_base		= MAX77650_REG_INTM_GLBL,
+	.type_in_mask		= true,
+	.type_invert		= true,
+	.init_ack_masked	= true,
+	.clear_on_unmask	= true,
+};
+
+static const struct regmap_config max77650_regmap_config = {
+	.name		= "max77650",
+	.reg_bits	= 8,
+	.val_bits	= 8,
+};
+
+static int max77650_i2c_probe(struct i2c_client *i2c)
+{
+	struct regmap_irq_chip_data *irq_data;
+	struct device *dev = &i2c->dev;
+	struct irq_domain *domain;
+	struct regmap *map;
+	unsigned int val;
+	int rv, id;
+
+	map = devm_regmap_init_i2c(i2c, &max77650_regmap_config);
+	if (IS_ERR(map)) {
+		dev_err(dev, "Unable to initialise I2C Regmap\n");
+		return PTR_ERR(map);
+	}
+
+	rv = regmap_read(map, MAX77650_REG_CID, &val);
+	if (rv) {
+		dev_err(dev, "Unable to read Chip ID\n");
+		return rv;
+	}
+
+	id = MAX77650_CID_BITS(val);
+	switch (id) {
+	case MAX77650_CID_77650A:
+	case MAX77650_CID_77650C:
+	case MAX77650_CID_77651A:
+	case MAX77650_CID_77651B:
+		break;
+	default:
+		dev_err(dev, "Chip not supported - ID: 0x%02x\n", id);
+		return -ENODEV;
+	}
+
+	/*
+	 * This IC has a low-power mode which reduces the quiescent current
+	 * consumption to ~5.6uA but is only suitable for systems consuming
+	 * less than ~2mA. Since this is not likely the case even on
+	 * linux-based wearables - keep the chip in normal power mode.
+	 */
+	rv = regmap_update_bits(map,
+				MAX77650_REG_CNFG_GLBL,
+				MAX77650_SBIA_LPM_MASK,
+				MAX77650_SBIA_LPM_DISABLED);
+	if (rv) {
+		dev_err(dev, "Unable to change the power mode\n");
+		return rv;
+	}
+
+	rv = devm_regmap_add_irq_chip(dev, map, i2c->irq,
+				      IRQF_ONESHOT | IRQF_SHARED, 0,
+				      &max77650_irq_chip, &irq_data);
+	if (rv) {
+		dev_err(dev, "Unable to add Regmap IRQ chip\n");
+		return rv;
+	}
+
+	domain = regmap_irq_get_domain(irq_data);
+
+	return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
+				    max77650_cells, ARRAY_SIZE(max77650_cells),
+				    NULL, 0, domain);
+}
+
+static const struct of_device_id max77650_of_match[] = {
+	{ .compatible = "maxim,max77650" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max77650_of_match);
+
+static struct i2c_driver max77650_i2c_driver = {
+	.driver = {
+		.name = "max77650",
+		.of_match_table = of_match_ptr(max77650_of_match),
+	},
+	.probe_new = max77650_i2c_probe,
+};
+module_i2c_driver(max77650_i2c_driver);
+
+MODULE_DESCRIPTION("MAXIM 77650/77651 multi-function core driver");
+MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
+MODULE_LICENSE("GPL v2");

drivers/mfd/mfd-core.c

@@ -269,6 +269,19 @@ static int mfd_add_device(struct device *parent, int id,
 	return ret;
 }
 
+/**
+ * mfd_add_devices - register child devices
+ *
+ * @parent:	Pointer to parent device.
+ * @id:		Can be PLATFORM_DEVID_AUTO to let the Platform API take care
+ *		of device numbering, or will be added to a device's cell_id.
+ * @cells:	Array of (struct mfd_cell)s describing child devices.
+ * @n_devs:	Number of child devices to register.
+ * @mem_base:	Parent register range resource for child devices.
+ * @irq_base:	Base of the range of virtual interrupt numbers allocated for
+ *		this MFD device. Unused if @domain is specified.
+ * @domain:	Interrupt domain to create mappings for hardware interrupts.
+ */
 int mfd_add_devices(struct device *parent, int id,
 		    const struct mfd_cell *cells, int n_devs,
 		    struct resource *mem_base,

drivers/mfd/rk808.c

@@ -568,14 +568,6 @@ static int rk808_remove(struct i2c_client *client)
 	return 0;
 }
 
-static const struct i2c_device_id rk808_ids[] = {
-	{ "rk805" },
-	{ "rk808" },
-	{ "rk818" },
-	{ },
-};
-MODULE_DEVICE_TABLE(i2c, rk808_ids);
-
 static struct i2c_driver rk808_i2c_driver = {
 	.driver = {
 		.name = "rk808",
@@ -583,7 +575,6 @@ static struct i2c_driver rk808_i2c_driver = {
 	},
 	.probe    = rk808_probe,
 	.remove   = rk808_remove,
-	.id_table = rk808_ids,
 };
 
 module_i2c_driver(rk808_i2c_driver);

drivers/mfd/sec-core.c

@@ -28,45 +28,33 @@
 #include <linux/regmap.h>
 
 static const struct mfd_cell s5m8751_devs[] = {
-	{
-		.name = "s5m8751-pmic",
-	}, {
-		.name = "s5m-charger",
-	}, {
-		.name = "s5m8751-codec",
-	},
+	{ .name = "s5m8751-pmic", },
+	{ .name = "s5m-charger", },
+	{ .name = "s5m8751-codec", },
 };
 
 static const struct mfd_cell s5m8763_devs[] = {
-	{
-		.name = "s5m8763-pmic",
-	}, {
-		.name = "s5m-rtc",
-	}, {
-		.name = "s5m-charger",
-	},
+	{ .name = "s5m8763-pmic", },
+	{ .name = "s5m-rtc", },
+	{ .name = "s5m-charger", },
 };
 
 static const struct mfd_cell s5m8767_devs[] = {
+	{ .name = "s5m8767-pmic", },
+	{ .name = "s5m-rtc", },
 	{
-		.name = "s5m8767-pmic",
-	}, {
-		.name = "s5m-rtc",
-	}, {
 		.name = "s5m8767-clk",
 		.of_compatible = "samsung,s5m8767-clk",
-	}
+	},
 };
 
 static const struct mfd_cell s2mps11_devs[] = {
+	{ .name = "s2mps11-regulator", },
+	{ .name = "s2mps14-rtc", },
 	{
-		.name = "s2mps11-regulator",
-	}, {
-		.name = "s2mps14-rtc",
-	}, {
 		.name = "s2mps11-clk",
 		.of_compatible = "samsung,s2mps11-clk",
-	}
+	},
 };
 
 static const struct mfd_cell s2mps13_devs[] = {
@@ -79,37 +67,30 @@ static const struct mfd_cell s2mps13_devs[] = {
 };
 
 static const struct mfd_cell s2mps14_devs[] = {
+	{ .name = "s2mps14-regulator", },
+	{ .name = "s2mps14-rtc", },
 	{
-		.name = "s2mps14-regulator",
-	}, {
-		.name = "s2mps14-rtc",
-	}, {
 		.name = "s2mps14-clk",
 		.of_compatible = "samsung,s2mps14-clk",
-	}
+	},
 };
 
 static const struct mfd_cell s2mps15_devs[] = {
+	{ .name = "s2mps15-regulator", },
+	{ .name = "s2mps15-rtc", },
 	{
-		.name = "s2mps15-regulator",
-	}, {
-		.name = "s2mps15-rtc",
-	}, {
 		.name = "s2mps13-clk",
 		.of_compatible = "samsung,s2mps13-clk",
 	},
 };
 
 static const struct mfd_cell s2mpa01_devs[] = {
-	{
-		.name = "s2mpa01-pmic",
-	},
+	{ .name = "s2mpa01-pmic", },
+	{ .name = "s2mps14-rtc", },
 };
 
 static const struct mfd_cell s2mpu02_devs[] = {
-	{
-		.name = "s2mpu02-regulator",
-	},
+	{ .name = "s2mpu02-regulator", },
 };
 
 #ifdef CONFIG_OF

drivers/mfd/sec-irq.c

@@ -455,6 +455,9 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
 	case S5M8767X:
 		sec_irq_chip = &s5m8767_irq_chip;
 		break;
+	case S2MPA01:
+		sec_irq_chip = &s2mps14_irq_chip;
+		break;
 	case S2MPS11X:
 		sec_irq_chip = &s2mps11_irq_chip;
 		break;

drivers/mfd/ssbi.c

@@ -80,8 +80,6 @@ struct ssbi {
 	int (*write)(struct ssbi *, u16 addr, const u8 *buf, int len);
 };
 
-#define to_ssbi(dev)	platform_get_drvdata(to_platform_device(dev))
-
 static inline u32 ssbi_readl(struct ssbi *ssbi, u32 reg)
 {
 	return readl(ssbi->base + reg);
@@ -243,7 +241,7 @@ ssbi_pa_write_bytes(struct ssbi *ssbi, u16 addr, const u8 *buf, int len)
 
 int ssbi_read(struct device *dev, u16 addr, u8 *buf, int len)
 {
-	struct ssbi *ssbi = to_ssbi(dev);
+	struct ssbi *ssbi = dev_get_drvdata(dev);
 	unsigned long flags;
 	int ret;
 
@@ -257,7 +255,7 @@ EXPORT_SYMBOL_GPL(ssbi_read);
 
 int ssbi_write(struct device *dev, u16 addr, const u8 *buf, int len)
 {
-	struct ssbi *ssbi = to_ssbi(dev);
+	struct ssbi *ssbi = dev_get_drvdata(dev);
 	unsigned long flags;
 	int ret;
 

drivers/mfd/sun6i-prcm.c

@@ -148,13 +148,12 @@ static const struct of_device_id sun6i_prcm_dt_ids[] = {
 
 static int sun6i_prcm_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
 	const struct of_device_id *match;
 	const struct prcm_data *data;
 	struct resource *res;
 	int ret;
 
-	match = of_match_node(sun6i_prcm_dt_ids, np);
+	match = of_match_node(sun6i_prcm_dt_ids, pdev->dev.of_node);
 	if (!match)
 		return -EINVAL;
 

drivers/mfd/syscon.c

@@ -12,6 +12,7 @@
  * (at your option) any later version.
  */
 
+#include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/hwspinlock.h>
 #include <linux/io.h>
@@ -45,6 +46,7 @@ static const struct regmap_config syscon_regmap_config = {
 
 static struct syscon *of_syscon_register(struct device_node *np)
 {
+	struct clk *clk;
 	struct syscon *syscon;
 	struct regmap *regmap;
 	void __iomem *base;
@@ -119,6 +121,18 @@ static struct syscon *of_syscon_register(struct device_node *np)
 		goto err_regmap;
 	}
 
+	clk = of_clk_get(np, 0);
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		/* clock is optional */
+		if (ret != -ENOENT)
+			goto err_clk;
+	} else {
+		ret = regmap_mmio_attach_clk(regmap, clk);
+		if (ret)
+			goto err_attach;
+	}
+
 	syscon->regmap = regmap;
 	syscon->np = np;
 
@@ -128,6 +142,11 @@ static struct syscon *of_syscon_register(struct device_node *np)
 
 	return syscon;
 
+err_attach:
+	if (!IS_ERR(clk))
+		clk_put(clk);
+err_clk:
+	regmap_exit(regmap);
 err_regmap:
 	iounmap(base);
 err_map:

drivers/mfd/t7l66xb.c

@@ -82,8 +82,7 @@ struct t7l66xb {
 
 static int t7l66xb_mmc_enable(struct platform_device *mmc)
 {
-	struct platform_device *dev = to_platform_device(mmc->dev.parent);
-	struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+	struct t7l66xb *t7l66xb = dev_get_drvdata(mmc->dev.parent);
 	unsigned long flags;
 	u8 dev_ctl;
 	int ret;
@@ -108,8 +107,7 @@ static int t7l66xb_mmc_enable(struct platform_device *mmc)
 
 static int t7l66xb_mmc_disable(struct platform_device *mmc)
 {
-	struct platform_device *dev = to_platform_device(mmc->dev.parent);
-	struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+	struct t7l66xb *t7l66xb = dev_get_drvdata(mmc->dev.parent);
 	unsigned long flags;
 	u8 dev_ctl;
 
@@ -128,16 +126,14 @@ static int t7l66xb_mmc_disable(struct platform_device *mmc)
 
 static void t7l66xb_mmc_pwr(struct platform_device *mmc, int state)
 {
-	struct platform_device *dev = to_platform_device(mmc->dev.parent);
-	struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+	struct t7l66xb *t7l66xb = dev_get_drvdata(mmc->dev.parent);
 
 	tmio_core_mmc_pwr(t7l66xb->scr + 0x200, 0, state);
 }
 
 static void t7l66xb_mmc_clk_div(struct platform_device *mmc, int state)
 {
-	struct platform_device *dev = to_platform_device(mmc->dev.parent);
-	struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+	struct t7l66xb *t7l66xb = dev_get_drvdata(mmc->dev.parent);
 
 	tmio_core_mmc_clk_div(t7l66xb->scr + 0x200, 0, state);
 }

drivers/mfd/tc6387xb.c

@@ -80,16 +80,14 @@ static int tc6387xb_resume(struct platform_device *dev)
 
 static void tc6387xb_mmc_pwr(struct platform_device *mmc, int state)
 {
-	struct platform_device *dev = to_platform_device(mmc->dev.parent);
-	struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
+	struct tc6387xb *tc6387xb = dev_get_drvdata(mmc->dev.parent);
 
 	tmio_core_mmc_pwr(tc6387xb->scr + 0x200, 0, state);
 }
 
 static void tc6387xb_mmc_clk_div(struct platform_device *mmc, int state)
 {
-	struct platform_device *dev = to_platform_device(mmc->dev.parent);
-	struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
+	struct tc6387xb *tc6387xb = dev_get_drvdata(mmc->dev.parent);
 
 	tmio_core_mmc_clk_div(tc6387xb->scr + 0x200, 0, state);
 }
@@ -97,8 +95,7 @@ static void tc6387xb_mmc_clk_div(struct platform_device *mmc, int state)
 
 static int tc6387xb_mmc_enable(struct platform_device *mmc)
 {
-	struct platform_device *dev      = to_platform_device(mmc->dev.parent);
-	struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
+	struct tc6387xb *tc6387xb = dev_get_drvdata(mmc->dev.parent);
 
 	clk_prepare_enable(tc6387xb->clk32k);
 
@@ -110,8 +107,7 @@ static int tc6387xb_mmc_enable(struct platform_device *mmc)
 
 static int tc6387xb_mmc_disable(struct platform_device *mmc)
 {
-	struct platform_device *dev      = to_platform_device(mmc->dev.parent);
-	struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
+	struct tc6387xb *tc6387xb = dev_get_drvdata(mmc->dev.parent);
 
 	clk_disable_unprepare(tc6387xb->clk32k);
 

drivers/mfd/tc6393xb.c

@@ -122,14 +122,13 @@ enum {
 
 static int tc6393xb_nand_enable(struct platform_device *nand)
 {
-	struct platform_device *dev = to_platform_device(nand->dev.parent);
-	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+	struct tc6393xb *tc6393xb = dev_get_drvdata(nand->dev.parent);
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&tc6393xb->lock, flags);
 
 	/* SMD buffer on */
-	dev_dbg(&dev->dev, "SMD buffer on\n");
+	dev_dbg(nand->dev.parent, "SMD buffer on\n");
 	tmio_iowrite8(0xff, tc6393xb->scr + SCR_GPI_BCR(1));
 
 	raw_spin_unlock_irqrestore(&tc6393xb->lock, flags);
@@ -312,8 +311,7 @@ static int tc6393xb_fb_disable(struct platform_device *dev)
 
 int tc6393xb_lcd_set_power(struct platform_device *fb, bool on)
 {
-	struct platform_device *dev = to_platform_device(fb->dev.parent);
-	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+	struct tc6393xb *tc6393xb = dev_get_drvdata(fb->dev.parent);
 	u8 fer;
 	unsigned long flags;
 
@@ -334,8 +332,7 @@ EXPORT_SYMBOL(tc6393xb_lcd_set_power);
 
 int tc6393xb_lcd_mode(struct platform_device *fb,
 					const struct fb_videomode *mode) {
-	struct platform_device *dev = to_platform_device(fb->dev.parent);
-	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+	struct tc6393xb *tc6393xb = dev_get_drvdata(fb->dev.parent);
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&tc6393xb->lock, flags);
@@ -351,8 +348,7 @@ EXPORT_SYMBOL(tc6393xb_lcd_mode);
 
 static int tc6393xb_mmc_enable(struct platform_device *mmc)
 {
-	struct platform_device *dev = to_platform_device(mmc->dev.parent);
-	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+	struct tc6393xb *tc6393xb = dev_get_drvdata(mmc->dev.parent);
 
 	tmio_core_mmc_enable(tc6393xb->scr + 0x200, 0,
 		tc6393xb_mmc_resources[0].start & 0xfffe);
@@ -362,8 +358,7 @@ static int tc6393xb_mmc_enable(struct platform_device *mmc)
 
 static int tc6393xb_mmc_resume(struct platform_device *mmc)
 {
-	struct platform_device *dev = to_platform_device(mmc->dev.parent);
-	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+	struct tc6393xb *tc6393xb = dev_get_drvdata(mmc->dev.parent);
 
 	tmio_core_mmc_resume(tc6393xb->scr + 0x200, 0,
 		tc6393xb_mmc_resources[0].start & 0xfffe);
@@ -373,16 +368,14 @@ static int tc6393xb_mmc_resume(struct platform_device *mmc)
 
 static void tc6393xb_mmc_pwr(struct platform_device *mmc, int state)
 {
-	struct platform_device *dev = to_platform_device(mmc->dev.parent);
-	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+	struct tc6393xb *tc6393xb = dev_get_drvdata(mmc->dev.parent);
 
 	tmio_core_mmc_pwr(tc6393xb->scr + 0x200, 0, state);
 }
 
 static void tc6393xb_mmc_clk_div(struct platform_device *mmc, int state)
 {
-	struct platform_device *dev = to_platform_device(mmc->dev.parent);
-	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+	struct tc6393xb *tc6393xb = dev_get_drvdata(mmc->dev.parent);
 
 	tmio_core_mmc_clk_div(tc6393xb->scr + 0x200, 0, state);
 }

drivers/mfd/tps65912-spi.c

@@ -27,6 +27,7 @@ static const struct of_device_id tps65912_spi_of_match_table[] = {
 	{ .compatible = "ti,tps65912", },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, tps65912_spi_of_match_table);
 
 static int tps65912_spi_probe(struct spi_device *spi)
 {

drivers/mfd/twl6040.c

@@ -322,8 +322,19 @@ int twl6040_power(struct twl6040 *twl6040, int on)
 			}
 		}
 
+		/*
+		 * Register access can produce errors after power-up unless we
+		 * wait at least 8ms based on measurements on duovero.
+		 */
+		usleep_range(10000, 12000);
+
 		/* Sync with the HW */
-		regcache_sync(twl6040->regmap);
+		ret = regcache_sync(twl6040->regmap);
+		if (ret) {
+			dev_err(twl6040->dev, "Failed to sync with the HW: %i\n",
+				ret);
+			goto out;
+		}
 
 		/* Default PLL configuration after power up */
 		twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL;

drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c

@@ -15,7 +15,7 @@
  * Adopted from dwmac-sti.c
  */
 
-#include <linux/mfd/syscon.h>
+#include <linux/mfd/altera-sysmgr.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_net.h>
@@ -114,7 +114,8 @@ static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *
 
 	dwmac->interface = of_get_phy_mode(np);
 
-	sys_mgr_base_addr = syscon_regmap_lookup_by_phandle(np, "altr,sysmgr-syscon");
+	sys_mgr_base_addr =
+		altr_sysmgr_regmap_lookup_by_phandle(np, "altr,sysmgr-syscon");
 	if (IS_ERR(sys_mgr_base_addr)) {
 		dev_info(dev, "No sysmgr-syscon node found\n");
 		return PTR_ERR(sys_mgr_base_addr);

drivers/pinctrl/Kconfig

@@ -273,6 +273,20 @@ config PINCTRL_ST
 	select PINCONF
 	select GPIOLIB_IRQCHIP
 
+config PINCTRL_STMFX
+	tristate "STMicroelectronics STMFX GPIO expander pinctrl driver"
+	depends on I2C
+	depends on OF || COMPILE_TEST
+	select GENERIC_PINCONF
+	select GPIOLIB_IRQCHIP
+	select MFD_STMFX
+	help
+	  Driver for STMicroelectronics Multi-Function eXpander (STMFX)
+	  GPIO expander.
+	  This provides a GPIO interface supporting inputs and outputs,
+	  and configuring push-pull, open-drain, and can also be used as
+	  interrupt-controller.
+
 config PINCTRL_U300
 	bool "U300 pin controller driver"
 	depends on ARCH_U300

drivers/pinctrl/Makefile

@@ -41,6 +41,7 @@ obj-$(CONFIG_PINCTRL_LANTIQ)	+= pinctrl-lantiq.o
 obj-$(CONFIG_PINCTRL_LPC18XX)	+= pinctrl-lpc18xx.o
 obj-$(CONFIG_PINCTRL_TB10X)	+= pinctrl-tb10x.o
 obj-$(CONFIG_PINCTRL_ST) 	+= pinctrl-st.o
+obj-$(CONFIG_PINCTRL_STMFX) 	+= pinctrl-stmfx.o
 obj-$(CONFIG_PINCTRL_ZYNQ)	+= pinctrl-zynq.o
 obj-$(CONFIG_PINCTRL_INGENIC)	+= pinctrl-ingenic.o
 obj-$(CONFIG_PINCTRL_RK805)	+= pinctrl-rk805.o

drivers/platform/chrome/cros_ec_proto.c

@@ -429,6 +429,12 @@ int cros_ec_query_all(struct cros_ec_device *ec_dev)
 	else
 		ec_dev->mkbp_event_supported = 1;
 
+	/* Probe if host sleep v1 is supported for S0ix failure detection. */
+	ret = cros_ec_get_host_command_version_mask(ec_dev,
+						    EC_CMD_HOST_SLEEP_EVENT,
+						    &ver_mask);
+	ec_dev->host_sleep_v1 = (ret >= 0 && (ver_mask & EC_VER_MASK(1)));
+
 	/*
 	 * Get host event wake mask, assume all events are wake events
 	 * if unavailable.

drivers/power/supply/Kconfig

@@ -499,6 +499,13 @@ config CHARGER_DETECTOR_MAX14656
 	  Revision 1.2 and can be found e.g. in Kindle 4/5th generation
 	  readers and certain LG devices.
 
+config CHARGER_MAX77650
+	tristate "Maxim MAX77650 battery charger driver"
+	depends on MFD_MAX77650
+	help
+	  Say Y to enable support for the battery charger control of MAX77650
+	  PMICs.
+
 config CHARGER_MAX77693
 	tristate "Maxim MAX77693 battery charger driver"
 	depends on MFD_MAX77693

drivers/power/supply/Makefile

@@ -70,6 +70,7 @@ obj-$(CONFIG_CHARGER_MANAGER)	+= charger-manager.o
 obj-$(CONFIG_CHARGER_LTC3651)	+= ltc3651-charger.o
 obj-$(CONFIG_CHARGER_MAX14577)	+= max14577_charger.o
 obj-$(CONFIG_CHARGER_DETECTOR_MAX14656)	+= max14656_charger_detector.o
+obj-$(CONFIG_CHARGER_MAX77650)	+= max77650-charger.o
 obj-$(CONFIG_CHARGER_MAX77693)	+= max77693_charger.o
 obj-$(CONFIG_CHARGER_MAX8997)	+= max8997_charger.o
 obj-$(CONFIG_CHARGER_MAX8998)	+= max8998_charger.o

drivers/power/supply/max77650-charger.c

+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2018 BayLibre SAS
+// Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+//
+// Battery charger driver for MAXIM 77650/77651 charger/power-supply.
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/max77650.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+
+#define MAX77650_CHARGER_ENABLED		BIT(0)
+#define MAX77650_CHARGER_DISABLED		0x00
+#define MAX77650_CHARGER_CHG_EN_MASK		BIT(0)
+
+#define MAX77650_CHG_DETAILS_MASK		GENMASK(7, 4)
+#define MAX77650_CHG_DETAILS_BITS(_reg) \
+		(((_reg) & MAX77650_CHG_DETAILS_MASK) >> 4)
+
+/* Charger is OFF. */
+#define MAX77650_CHG_OFF			0x00
+/* Charger is in prequalification mode. */
+#define MAX77650_CHG_PREQ			0x01
+/* Charger is in fast-charge constant current mode. */
+#define MAX77650_CHG_ON_CURR			0x02
+/* Charger is in JEITA modified fast-charge constant-current mode. */
+#define MAX77650_CHG_ON_CURR_JEITA		0x03
+/* Charger is in fast-charge constant-voltage mode. */
+#define MAX77650_CHG_ON_VOLT			0x04
+/* Charger is in JEITA modified fast-charge constant-voltage mode. */
+#define MAX77650_CHG_ON_VOLT_JEITA		0x05
+/* Charger is in top-off mode. */
+#define MAX77650_CHG_ON_TOPOFF			0x06
+/* Charger is in JEITA modified top-off mode. */
+#define MAX77650_CHG_ON_TOPOFF_JEITA		0x07
+/* Charger is done. */
+#define MAX77650_CHG_DONE			0x08
+/* Charger is JEITA modified done. */
+#define MAX77650_CHG_DONE_JEITA			0x09
+/* Charger is suspended due to a prequalification timer fault. */
+#define MAX77650_CHG_SUSP_PREQ_TIM_FAULT	0x0a
+/* Charger is suspended due to a fast-charge timer fault. */
+#define MAX77650_CHG_SUSP_FAST_CHG_TIM_FAULT	0x0b
+/* Charger is suspended due to a battery temperature fault. */
+#define MAX77650_CHG_SUSP_BATT_TEMP_FAULT	0x0c
+
+#define MAX77650_CHGIN_DETAILS_MASK		GENMASK(3, 2)
+#define MAX77650_CHGIN_DETAILS_BITS(_reg) \
+		(((_reg) & MAX77650_CHGIN_DETAILS_MASK) >> 2)
+
+#define MAX77650_CHGIN_UNDERVOLTAGE_LOCKOUT	0x00
+#define MAX77650_CHGIN_OVERVOLTAGE_LOCKOUT	0x01
+#define MAX77650_CHGIN_OKAY			0x11
+
+#define MAX77650_CHARGER_CHG_MASK	BIT(1)
+#define MAX77650_CHARGER_CHG_CHARGING(_reg) \
+		(((_reg) & MAX77650_CHARGER_CHG_MASK) > 1)
+
+#define MAX77650_CHARGER_VCHGIN_MIN_MASK	0xc0
+#define MAX77650_CHARGER_VCHGIN_MIN_SHIFT(_val)	((_val) << 5)
+
+#define MAX77650_CHARGER_ICHGIN_LIM_MASK	0x1c
+#define MAX77650_CHARGER_ICHGIN_LIM_SHIFT(_val)	((_val) << 2)
+
+struct max77650_charger_data {
+	struct regmap *map;
+	struct device *dev;
+};
+
+static enum power_supply_property max77650_charger_properties[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_CHARGE_TYPE
+};
+
+static const unsigned int max77650_charger_vchgin_min_table[] = {
+	4000000, 4100000, 4200000, 4300000, 4400000, 4500000, 4600000, 4700000
+};
+
+static const unsigned int max77650_charger_ichgin_lim_table[] = {
+	95000, 190000, 285000, 380000, 475000
+};
+
+static int max77650_charger_set_vchgin_min(struct max77650_charger_data *chg,
+					   unsigned int val)
+{
+	int i, rv;
+
+	for (i = 0; i < ARRAY_SIZE(max77650_charger_vchgin_min_table); i++) {
+		if (val == max77650_charger_vchgin_min_table[i]) {
+			rv = regmap_update_bits(chg->map,
+					MAX77650_REG_CNFG_CHG_B,
+					MAX77650_CHARGER_VCHGIN_MIN_MASK,
+					MAX77650_CHARGER_VCHGIN_MIN_SHIFT(i));
+			if (rv)
+				return rv;
+
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int max77650_charger_set_ichgin_lim(struct max77650_charger_data *chg,
+					   unsigned int val)
+{
+	int i, rv;
+
+	for (i = 0; i < ARRAY_SIZE(max77650_charger_ichgin_lim_table); i++) {
+		if (val == max77650_charger_ichgin_lim_table[i]) {
+			rv = regmap_update_bits(chg->map,
+					MAX77650_REG_CNFG_CHG_B,
+					MAX77650_CHARGER_ICHGIN_LIM_MASK,
+					MAX77650_CHARGER_ICHGIN_LIM_SHIFT(i));
+			if (rv)
+				return rv;
+
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int max77650_charger_enable(struct max77650_charger_data *chg)
+{
+	int rv;
+
+	rv = regmap_update_bits(chg->map,
+				MAX77650_REG_CNFG_CHG_B,
+				MAX77650_CHARGER_CHG_EN_MASK,
+				MAX77650_CHARGER_ENABLED);
+	if (rv)
+		dev_err(chg->dev, "unable to enable the charger: %d\n", rv);
+
+	return rv;
+}
+
+static int max77650_charger_disable(struct max77650_charger_data *chg)
+{
+	int rv;
+
+	rv = regmap_update_bits(chg->map,
+				MAX77650_REG_CNFG_CHG_B,
+				MAX77650_CHARGER_CHG_EN_MASK,
+				MAX77650_CHARGER_DISABLED);
+	if (rv)
+		dev_err(chg->dev, "unable to disable the charger: %d\n", rv);
+
+	return rv;
+}
+
+static irqreturn_t max77650_charger_check_status(int irq, void *data)
+{
+	struct max77650_charger_data *chg = data;
+	int rv, reg;
+
+	rv = regmap_read(chg->map, MAX77650_REG_STAT_CHG_B, &reg);
+	if (rv) {
+		dev_err(chg->dev,
+			"unable to read the charger status: %d\n", rv);
+		return IRQ_HANDLED;
+	}
+
+	switch (MAX77650_CHGIN_DETAILS_BITS(reg)) {
+	case MAX77650_CHGIN_UNDERVOLTAGE_LOCKOUT:
+		dev_err(chg->dev, "undervoltage lockout detected, disabling charger\n");
+		max77650_charger_disable(chg);
+		break;
+	case MAX77650_CHGIN_OVERVOLTAGE_LOCKOUT:
+		dev_err(chg->dev, "overvoltage lockout detected, disabling charger\n");
+		max77650_charger_disable(chg);
+		break;
+	case MAX77650_CHGIN_OKAY:
+		max77650_charger_enable(chg);
+		break;
+	default:
+		/* May be 0x10 - debouncing */
+		break;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int max77650_charger_get_property(struct power_supply *psy,
+					 enum power_supply_property psp,
+					 union power_supply_propval *val)
+{
+	struct max77650_charger_data *chg = power_supply_get_drvdata(psy);
+	int rv, reg;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		rv = regmap_read(chg->map, MAX77650_REG_STAT_CHG_B, &reg);
+		if (rv)
+			return rv;
+
+		if (MAX77650_CHARGER_CHG_CHARGING(reg)) {
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+			break;
+		}
+
+		switch (MAX77650_CHG_DETAILS_BITS(reg)) {
+		case MAX77650_CHG_OFF:
+		case MAX77650_CHG_SUSP_PREQ_TIM_FAULT:
+		case MAX77650_CHG_SUSP_FAST_CHG_TIM_FAULT:
+		case MAX77650_CHG_SUSP_BATT_TEMP_FAULT:
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			break;
+		case MAX77650_CHG_PREQ:
+		case MAX77650_CHG_ON_CURR:
+		case MAX77650_CHG_ON_CURR_JEITA:
+		case MAX77650_CHG_ON_VOLT:
+		case MAX77650_CHG_ON_VOLT_JEITA:
+		case MAX77650_CHG_ON_TOPOFF:
+		case MAX77650_CHG_ON_TOPOFF_JEITA:
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+			break;
+		case MAX77650_CHG_DONE:
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+			break;
+		default:
+			val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+		}
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		rv = regmap_read(chg->map, MAX77650_REG_STAT_CHG_B, &reg);
+		if (rv)
+			return rv;
+
+		val->intval = MAX77650_CHARGER_CHG_CHARGING(reg);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		rv = regmap_read(chg->map, MAX77650_REG_STAT_CHG_B, &reg);
+		if (rv)
+			return rv;
+
+		if (!MAX77650_CHARGER_CHG_CHARGING(reg)) {
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+			break;
+		}
+
+		switch (MAX77650_CHG_DETAILS_BITS(reg)) {
+		case MAX77650_CHG_PREQ:
+		case MAX77650_CHG_ON_CURR:
+		case MAX77650_CHG_ON_CURR_JEITA:
+		case MAX77650_CHG_ON_VOLT:
+		case MAX77650_CHG_ON_VOLT_JEITA:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+			break;
+		case MAX77650_CHG_ON_TOPOFF:
+		case MAX77650_CHG_ON_TOPOFF_JEITA:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+			break;
+		default:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct power_supply_desc max77650_battery_desc = {
+	.name		= "max77650",
+	.type		= POWER_SUPPLY_TYPE_USB,
+	.get_property	= max77650_charger_get_property,
+	.properties	= max77650_charger_properties,
+	.num_properties	= ARRAY_SIZE(max77650_charger_properties),
+};
+
+static int max77650_charger_probe(struct platform_device *pdev)
+{
+	struct power_supply_config pscfg = {};
+	struct max77650_charger_data *chg;
+	struct power_supply *battery;
+	struct device *dev, *parent;
+	int rv, chg_irq, chgin_irq;
+	unsigned int prop;
+
+	dev = &pdev->dev;
+	parent = dev->parent;
+
+	chg = devm_kzalloc(dev, sizeof(*chg), GFP_KERNEL);
+	if (!chg)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, chg);
+
+	chg->map = dev_get_regmap(parent, NULL);
+	if (!chg->map)
+		return -ENODEV;
+
+	chg->dev = dev;
+
+	pscfg.of_node = dev->of_node;
+	pscfg.drv_data = chg;
+
+	chg_irq = platform_get_irq_byname(pdev, "CHG");
+	if (chg_irq < 0)
+		return chg_irq;
+
+	chgin_irq = platform_get_irq_byname(pdev, "CHGIN");
+	if (chgin_irq < 0)
+		return chgin_irq;
+
+	rv = devm_request_any_context_irq(dev, chg_irq,
+					  max77650_charger_check_status,
+					  IRQF_ONESHOT, "chg", chg);
+	if (rv < 0)
+		return rv;
+
+	rv = devm_request_any_context_irq(dev, chgin_irq,
+					  max77650_charger_check_status,
+					  IRQF_ONESHOT, "chgin", chg);
+	if (rv < 0)
+		return rv;
+
+	battery = devm_power_supply_register(dev,
+					     &max77650_battery_desc, &pscfg);
+	if (IS_ERR(battery))
+		return PTR_ERR(battery);
+
+	rv = of_property_read_u32(dev->of_node,
+				  "input-voltage-min-microvolt", &prop);
+	if (rv == 0) {
+		rv = max77650_charger_set_vchgin_min(chg, prop);
+		if (rv)
+			return rv;
+	}
+
+	rv = of_property_read_u32(dev->of_node,
+				  "input-current-limit-microamp", &prop);
+	if (rv == 0) {
+		rv = max77650_charger_set_ichgin_lim(chg, prop);
+		if (rv)
+			return rv;
+	}
+
+	return max77650_charger_enable(chg);
+}
+
+static int max77650_charger_remove(struct platform_device *pdev)
+{
+	struct max77650_charger_data *chg = platform_get_drvdata(pdev);
+
+	return max77650_charger_disable(chg);
+}
+
+static struct platform_driver max77650_charger_driver = {
+	.driver = {
+		.name = "max77650-charger",
+	},
+	.probe = max77650_charger_probe,
+	.remove = max77650_charger_remove,
+};
+module_platform_driver(max77650_charger_driver);
+
+MODULE_DESCRIPTION("MAXIM 77650/77651 charger driver");
+MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
+MODULE_LICENSE("GPL v2");

include/linux/mfd/altera-sysmgr.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018-2019 Intel Corporation
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2012 Linaro Ltd.
+ */
+
+#ifndef __LINUX_MFD_ALTERA_SYSMGR_H__
+#define __LINUX_MFD_ALTERA_SYSMGR_H__
+
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/firmware/intel/stratix10-smc.h>
+
+struct device_node;
+
+#ifdef CONFIG_MFD_ALTERA_SYSMGR
+struct regmap *altr_sysmgr_regmap_lookup_by_phandle(struct device_node *np,
+						    const char *property);
+#else
+static inline struct regmap *
+altr_sysmgr_regmap_lookup_by_phandle(struct device_node *np,
+				     const char *property)
+{
+	return ERR_PTR(-ENOTSUPP);
+}
+#endif
+
+#endif /* __LINUX_MFD_ALTERA_SYSMGR_H__ */

include/linux/mfd/cros_ec.h

@@ -23,7 +23,10 @@
 #include <linux/mutex.h>
 
 #define CROS_EC_DEV_NAME "cros_ec"
+#define CROS_EC_DEV_FP_NAME "cros_fp"
 #define CROS_EC_DEV_PD_NAME "cros_pd"
+#define CROS_EC_DEV_TP_NAME "cros_tp"
+#define CROS_EC_DEV_ISH_NAME "cros_ish"
 
 /*
  * The EC is unresponsive for a time after a reboot command.  Add a
@@ -120,6 +123,7 @@ struct cros_ec_command {
  * @pkt_xfer: Send packet to EC and get response.
  * @lock: One transaction at a time.
  * @mkbp_event_supported: True if this EC supports the MKBP event protocol.
+ * @host_sleep_v1: True if this EC supports the sleep v1 command.
  * @event_notifier: Interrupt event notifier for transport devices.
  * @event_data: Raw payload transferred with the MKBP event.
  * @event_size: Size in bytes of the event data.
@@ -153,6 +157,7 @@ struct cros_ec_device {
 			struct cros_ec_command *msg);
 	struct mutex lock;
 	bool mkbp_event_supported;
+	bool host_sleep_v1;
 	struct blocking_notifier_head event_notifier;
 
 	struct ec_response_get_next_event_v1 event_data;

include/linux/mfd/cros_ec_commands.h

@@ -840,7 +840,7 @@ enum ec_feature_code {
 	 * (Common Smart Battery System Interface Specification)
 	 */
 	EC_FEATURE_SMART_BATTERY = 18,
-	/* EC can dectect when the host hangs. */
+	/* EC can detect when the host hangs. */
 	EC_FEATURE_HANG_DETECT = 19,
 	/* Report power information, for pit only */
 	EC_FEATURE_PMU = 20,
@@ -852,10 +852,42 @@ enum ec_feature_code {
 	EC_FEATURE_USB_MUX = 23,
 	/* Motion Sensor code has an internal software FIFO */
 	EC_FEATURE_MOTION_SENSE_FIFO = 24,
+	/* Support temporary secure vstore */
+	EC_FEATURE_VSTORE = 25,
+	/* EC decides on USB-C SS mux state, muxes configured by host */
+	EC_FEATURE_USBC_SS_MUX_VIRTUAL = 26,
 	/* EC has RTC feature that can be controlled by host commands */
 	EC_FEATURE_RTC = 27,
+	/* The MCU exposes a Fingerprint sensor */
+	EC_FEATURE_FINGERPRINT = 28,
+	/* The MCU exposes a Touchpad */
+	EC_FEATURE_TOUCHPAD = 29,
+	/* The MCU has RWSIG task enabled */
+	EC_FEATURE_RWSIG = 30,
+	/* EC has device events support */
+	EC_FEATURE_DEVICE_EVENT = 31,
+	/* EC supports the unified wake masks for LPC/eSPI systems */
+	EC_FEATURE_UNIFIED_WAKE_MASKS = 32,
+	/* EC supports 64-bit host events */
+	EC_FEATURE_HOST_EVENT64 = 33,
+	/* EC runs code in RAM (not in place, a.k.a. XIP) */
+	EC_FEATURE_EXEC_IN_RAM = 34,
 	/* EC supports CEC commands */
 	EC_FEATURE_CEC = 35,
+	/* EC supports tight sensor timestamping. */
+	EC_FEATURE_MOTION_SENSE_TIGHT_TIMESTAMPS = 36,
+	/*
+	 * EC supports tablet mode detection aligned to Chrome and allows
+	 * setting of threshold by host command using
+	 * MOTIONSENSE_CMD_TABLET_MODE_LID_ANGLE.
+	 */
+	EC_FEATURE_REFINED_TABLET_MODE_HYSTERESIS = 37,
+	/* EC supports audio codec. */
+	EC_FEATURE_AUDIO_CODEC = 38,
+	/* EC Supports SCP. */
+	EC_FEATURE_SCP = 39,
+	/* The MCU is an Integrated Sensor Hub */
+	EC_FEATURE_ISH = 40,
 };
 
 #define EC_FEATURE_MASK_0(event_code) (1UL << (event_code % 32))
@@ -2729,6 +2761,63 @@ struct ec_params_host_sleep_event {
 	uint8_t sleep_event;
 } __packed;
 
+/*
+ * Use a default timeout value (CONFIG_SLEEP_TIMEOUT_MS) for detecting sleep
+ * transition failures
+ */
+#define EC_HOST_SLEEP_TIMEOUT_DEFAULT 0
+
+/* Disable timeout detection for this sleep transition */
+#define EC_HOST_SLEEP_TIMEOUT_INFINITE 0xFFFF
+
+struct ec_params_host_sleep_event_v1 {
+	/* The type of sleep being entered or exited. */
+	uint8_t sleep_event;
+
+	/* Padding */
+	uint8_t reserved;
+	union {
+		/* Parameters that apply for suspend messages. */
+		struct {
+			/*
+			 * The timeout in milliseconds between when this message
+			 * is received and when the EC will declare sleep
+			 * transition failure if the sleep signal is not
+			 * asserted.
+			 */
+			uint16_t sleep_timeout_ms;
+		} suspend_params;
+
+		/* No parameters for non-suspend messages. */
+	};
+} __packed;
+
+/* A timeout occurred when this bit is set */
+#define EC_HOST_RESUME_SLEEP_TIMEOUT 0x80000000
+
+/*
+ * The mask defining which bits correspond to the number of sleep transitions,
+ * as well as the maximum number of suspend line transitions that will be
+ * reported back to the host.
+ */
+#define EC_HOST_RESUME_SLEEP_TRANSITIONS_MASK 0x7FFFFFFF
+
+struct ec_response_host_sleep_event_v1 {
+	union {
+		/* Response fields that apply for resume messages. */
+		struct {
+			/*
+			 * The number of sleep power signal transitions that
+			 * occurred since the suspend message. The high bit
+			 * indicates a timeout occurred.
+			 */
+			uint32_t sleep_transitions;
+		} resume_response;
+
+		/* No response fields for non-resume messages. */
+	};
+} __packed;
+
 /*****************************************************************************/
 /* Smart battery pass-through */
 

include/linux/mfd/da9063/core.h

+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Definitions for DA9063 MFD driver
  *
@@ -5,12 +6,6 @@
  *
  * Author: Michal Hajduk, Dialog Semiconductor
  * Author: Krystian Garbaciak, Dialog Semiconductor
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
  */
 
 #ifndef __MFD_DA9063_CORE_H__

include/linux/mfd/da9063/registers.h

+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Registers definition for DA9063 modules
  *
@@ -5,12 +6,6 @@
  *
  * Author: Michal Hajduk, Dialog Semiconductor
  * Author: Krystian Garbaciak, Dialog Semiconductor
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
  */
 
 #ifndef _DA9063_REG_H
@@ -215,9 +210,9 @@
 
 /* DA9063 Configuration registers */
 /* OTP */
-#define	DA9063_REG_OPT_COUNT		0x101
-#define	DA9063_REG_OPT_ADDR		0x102
-#define	DA9063_REG_OPT_DATA		0x103
+#define	DA9063_REG_OTP_CONT		0x101
+#define	DA9063_REG_OTP_ADDR		0x102
+#define	DA9063_REG_OTP_DATA		0x103
 
 /* Customer Trim and Configuration */
 #define	DA9063_REG_T_OFFSET		0x104

include/linux/mfd/max77620.h

@@ -136,8 +136,8 @@
 #define MAX77620_FPS_PERIOD_MIN_US		40
 #define MAX20024_FPS_PERIOD_MIN_US		20
 
-#define MAX77620_FPS_PERIOD_MAX_US		2560
-#define MAX20024_FPS_PERIOD_MAX_US		5120
+#define MAX20024_FPS_PERIOD_MAX_US		2560
+#define MAX77620_FPS_PERIOD_MAX_US		5120
 
 #define MAX77620_REG_FPS_GPIO1			0x54
 #define MAX77620_REG_FPS_GPIO2			0x55
@@ -324,6 +324,7 @@ enum max77620_fps_src {
 enum max77620_chip_id {
 	MAX77620,
 	MAX20024,
+	MAX77663,
 };
 
 struct max77620_chip {

include/linux/mfd/max77650.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 BayLibre SAS
+ * Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+ *
+ * Common definitions for MAXIM 77650/77651 charger/power-supply.
+ */
+
+#ifndef MAX77650_H
+#define MAX77650_H
+
+#include <linux/bits.h>
+
+#define MAX77650_REG_INT_GLBL		0x00
+#define MAX77650_REG_INT_CHG		0x01
+#define MAX77650_REG_STAT_CHG_A		0x02
+#define MAX77650_REG_STAT_CHG_B		0x03
+#define MAX77650_REG_ERCFLAG		0x04
+#define MAX77650_REG_STAT_GLBL		0x05
+#define MAX77650_REG_INTM_GLBL		0x06
+#define MAX77650_REG_INTM_CHG		0x07
+#define MAX77650_REG_CNFG_GLBL		0x10
+#define MAX77650_REG_CID		0x11
+#define MAX77650_REG_CNFG_GPIO		0x12
+#define MAX77650_REG_CNFG_CHG_A		0x18
+#define MAX77650_REG_CNFG_CHG_B		0x19
+#define MAX77650_REG_CNFG_CHG_C		0x1a
+#define MAX77650_REG_CNFG_CHG_D		0x1b
+#define MAX77650_REG_CNFG_CHG_E		0x1c
+#define MAX77650_REG_CNFG_CHG_F		0x1d
+#define MAX77650_REG_CNFG_CHG_G		0x1e
+#define MAX77650_REG_CNFG_CHG_H		0x1f
+#define MAX77650_REG_CNFG_CHG_I		0x20
+#define MAX77650_REG_CNFG_SBB_TOP	0x28
+#define MAX77650_REG_CNFG_SBB0_A	0x29
+#define MAX77650_REG_CNFG_SBB0_B	0x2a
+#define MAX77650_REG_CNFG_SBB1_A	0x2b
+#define MAX77650_REG_CNFG_SBB1_B	0x2c
+#define MAX77650_REG_CNFG_SBB2_A	0x2d
+#define MAX77650_REG_CNFG_SBB2_B	0x2e
+#define MAX77650_REG_CNFG_LDO_A		0x38
+#define MAX77650_REG_CNFG_LDO_B		0x39
+#define MAX77650_REG_CNFG_LED0_A	0x40
+#define MAX77650_REG_CNFG_LED1_A	0x41
+#define MAX77650_REG_CNFG_LED2_A	0x42
+#define MAX77650_REG_CNFG_LED0_B	0x43
+#define MAX77650_REG_CNFG_LED1_B	0x44
+#define MAX77650_REG_CNFG_LED2_B	0x45
+#define MAX77650_REG_CNFG_LED_TOP	0x46
+
+#define MAX77650_CID_MASK		GENMASK(3, 0)
+#define MAX77650_CID_BITS(_reg)		(_reg & MAX77650_CID_MASK)
+
+#define MAX77650_CID_77650A		0x03
+#define MAX77650_CID_77650C		0x0a
+#define MAX77650_CID_77651A		0x06
+#define MAX77650_CID_77651B		0x08
+
+#endif /* MAX77650_H */

include/linux/mfd/stmfx.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 STMicroelectronics
+ * Author(s): Amelie Delaunay <amelie.delaunay@st.com>.
+ */
+
+#ifndef MFD_STMFX_H
+#define MFX_STMFX_H
+
+#include <linux/regmap.h>
+
+/* General */
+#define STMFX_REG_CHIP_ID		0x00 /* R */
+#define STMFX_REG_FW_VERSION_MSB	0x01 /* R */
+#define STMFX_REG_FW_VERSION_LSB	0x02 /* R */
+#define STMFX_REG_SYS_CTRL		0x40 /* RW */
+/* IRQ output management */
+#define STMFX_REG_IRQ_OUT_PIN		0x41 /* RW */
+#define STMFX_REG_IRQ_SRC_EN		0x42 /* RW */
+#define STMFX_REG_IRQ_PENDING		0x08 /* R */
+#define STMFX_REG_IRQ_ACK		0x44 /* RW */
+/* GPIO management */
+#define STMFX_REG_IRQ_GPI_PENDING1	0x0C /* R */
+#define STMFX_REG_IRQ_GPI_PENDING2	0x0D /* R */
+#define STMFX_REG_IRQ_GPI_PENDING3	0x0E /* R */
+#define STMFX_REG_GPIO_STATE1		0x10 /* R */
+#define STMFX_REG_GPIO_STATE2		0x11 /* R */
+#define STMFX_REG_GPIO_STATE3		0x12 /* R */
+#define STMFX_REG_IRQ_GPI_SRC1		0x48 /* RW */
+#define STMFX_REG_IRQ_GPI_SRC2		0x49 /* RW */
+#define STMFX_REG_IRQ_GPI_SRC3		0x4A /* RW */
+#define STMFX_REG_IRQ_GPI_EVT1		0x4C /* RW */
+#define STMFX_REG_IRQ_GPI_EVT2		0x4D /* RW */
+#define STMFX_REG_IRQ_GPI_EVT3		0x4E /* RW */
+#define STMFX_REG_IRQ_GPI_TYPE1		0x50 /* RW */
+#define STMFX_REG_IRQ_GPI_TYPE2		0x51 /* RW */
+#define STMFX_REG_IRQ_GPI_TYPE3		0x52 /* RW */
+#define STMFX_REG_IRQ_GPI_ACK1		0x54 /* RW */
+#define STMFX_REG_IRQ_GPI_ACK2		0x55 /* RW */
+#define STMFX_REG_IRQ_GPI_ACK3		0x56 /* RW */
+#define STMFX_REG_GPIO_DIR1		0x60 /* RW */
+#define STMFX_REG_GPIO_DIR2		0x61 /* RW */
+#define STMFX_REG_GPIO_DIR3		0x62 /* RW */
+#define STMFX_REG_GPIO_TYPE1		0x64 /* RW */
+#define STMFX_REG_GPIO_TYPE2		0x65 /* RW */
+#define STMFX_REG_GPIO_TYPE3		0x66 /* RW */
+#define STMFX_REG_GPIO_PUPD1		0x68 /* RW */
+#define STMFX_REG_GPIO_PUPD2		0x69 /* RW */
+#define STMFX_REG_GPIO_PUPD3		0x6A /* RW */
+#define STMFX_REG_GPO_SET1		0x6C /* RW */
+#define STMFX_REG_GPO_SET2		0x6D /* RW */
+#define STMFX_REG_GPO_SET3		0x6E /* RW */
+#define STMFX_REG_GPO_CLR1		0x70 /* RW */
+#define STMFX_REG_GPO_CLR2		0x71 /* RW */
+#define STMFX_REG_GPO_CLR3		0x72 /* RW */
+
+#define STMFX_REG_MAX			0xB0
+
+/* MFX boot time is around 10ms, so after reset, we have to wait this delay */
+#define STMFX_BOOT_TIME_MS 10
+
+/* STMFX_REG_CHIP_ID bitfields */
+#define STMFX_REG_CHIP_ID_MASK		GENMASK(7, 0)
+
+/* STMFX_REG_SYS_CTRL bitfields */
+#define STMFX_REG_SYS_CTRL_GPIO_EN	BIT(0)
+#define STMFX_REG_SYS_CTRL_TS_EN	BIT(1)
+#define STMFX_REG_SYS_CTRL_IDD_EN	BIT(2)
+#define STMFX_REG_SYS_CTRL_ALTGPIO_EN	BIT(3)
+#define STMFX_REG_SYS_CTRL_SWRST	BIT(7)
+
+/* STMFX_REG_IRQ_OUT_PIN bitfields */
+#define STMFX_REG_IRQ_OUT_PIN_TYPE	BIT(0) /* 0-OD 1-PP */
+#define STMFX_REG_IRQ_OUT_PIN_POL	BIT(1) /* 0-active LOW 1-active HIGH */
+
+/* STMFX_REG_IRQ_(SRC_EN/PENDING/ACK) bit shift */
+enum stmfx_irqs {
+	STMFX_REG_IRQ_SRC_EN_GPIO = 0,
+	STMFX_REG_IRQ_SRC_EN_IDD,
+	STMFX_REG_IRQ_SRC_EN_ERROR,
+	STMFX_REG_IRQ_SRC_EN_TS_DET,
+	STMFX_REG_IRQ_SRC_EN_TS_NE,
+	STMFX_REG_IRQ_SRC_EN_TS_TH,
+	STMFX_REG_IRQ_SRC_EN_TS_FULL,
+	STMFX_REG_IRQ_SRC_EN_TS_OVF,
+	STMFX_REG_IRQ_SRC_MAX,
+};
+
+enum stmfx_functions {
+	STMFX_FUNC_GPIO		= BIT(0), /* GPIO[15:0] */
+	STMFX_FUNC_ALTGPIO_LOW	= BIT(1), /* aGPIO[3:0] */
+	STMFX_FUNC_ALTGPIO_HIGH = BIT(2), /* aGPIO[7:4] */
+	STMFX_FUNC_TS		= BIT(3),
+	STMFX_FUNC_IDD		= BIT(4),
+};
+
+/**
+ * struct stmfx_ddata - STMFX MFD structure
+ * @device:		device reference used for logs
+ * @map:		register map
+ * @vdd:		STMFX power supply
+ * @irq_domain:		IRQ domain
+ * @lock:		IRQ bus lock
+ * @irq_src:		cache of IRQ_SRC_EN register for bus_lock
+ * @bkp_sysctrl:	backup of SYS_CTRL register for suspend/resume
+ * @bkp_irqoutpin:	backup of IRQ_OUT_PIN register for suspend/resume
+ */
+struct stmfx {
+	struct device *dev;
+	struct regmap *map;
+	struct regulator *vdd;
+	struct irq_domain *irq_domain;
+	struct mutex lock; /* IRQ bus lock */
+	u8 irq_src;
+#ifdef CONFIG_PM
+	u8 bkp_sysctrl;
+	u8 bkp_irqoutpin;
+#endif
+};
+
+int stmfx_function_enable(struct stmfx *stmfx, u32 func);
+int stmfx_function_disable(struct stmfx *stmfx, u32 func);
+#endif

include/linux/mfd/syscon/atmel-matrix.h

+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  *  Copyright (C) 2014 Atmel Corporation.
  *
  * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #ifndef _LINUX_MFD_SYSCON_ATMEL_MATRIX_H

include/linux/mfd/syscon/atmel-mc.h

+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
@@ -5,11 +6,6 @@
  * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals
  * registers.
  * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #ifndef _LINUX_MFD_SYSCON_ATMEL_MC_H_

include/linux/mfd/syscon/atmel-smc.h

+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Atmel SMC (Static Memory Controller) register offsets and bit definitions.
  *
@@ -5,10 +6,6 @@
  * Copyright (C) 2014 Free Electrons
  *
  * Author: Boris Brezillon <boris.brezillon@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef _LINUX_MFD_SYSCON_ATMEL_SMC_H_

include/linux/mfd/syscon/atmel-st.h

+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
  *
  * System Timer (ST) - System peripherals registers.
  * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #ifndef _LINUX_MFD_SYSCON_ATMEL_ST_H

include/linux/mfd/syscon/imx6q-iomuxc-gpr.h

@@ -410,6 +410,15 @@
 #define IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK		(0x3 << 17)
 #define IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_EXT		(0x3 << 13)
 
+#define IMX6SX_GPR2_MQS_OVERSAMPLE_MASK			(0x1 << 26)
+#define IMX6SX_GPR2_MQS_OVERSAMPLE_SHIFT		(26)
+#define IMX6SX_GPR2_MQS_EN_MASK				(0x1 << 25)
+#define IMX6SX_GPR2_MQS_EN_SHIFT			(25)
+#define IMX6SX_GPR2_MQS_SW_RST_MASK			(0x1 << 24)
+#define IMX6SX_GPR2_MQS_SW_RST_SHIFT			(24)
+#define IMX6SX_GPR2_MQS_CLK_DIV_MASK			(0xFF << 16)
+#define IMX6SX_GPR2_MQS_CLK_DIV_SHIFT			(16)
+
 #define IMX6SX_GPR4_FEC_ENET1_STOP_REQ			(0x1 << 3)
 #define IMX6SX_GPR4_FEC_ENET2_STOP_REQ			(0x1 << 4)