Merge tag 'del-shark-for-v3.13' of...

Merge tag 'del-shark-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/cleanup

From Linus Walleij:

This deletes the Shark SA110-based sub-architecture from
the kernel.

* tag 'del-shark-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  video: drop code for ARCH_SHARK in cyber2000fb
  input: i8042: drop dependency on ARCH_SHARK
  ide: drop dependency on ARCH_SHARK
  block: drop dependency on ARCH_SHARK
  MAINTAINERS: delete Shark machine entry
  ARM: delete mach-shark
Signed-off-by: Olof Johansson <olof@lixom.net>

MAINTAINERS

@@ -1142,11 +1142,6 @@ F:	drivers/net/ethernet/i825xx/ether1*
 F:	drivers/net/ethernet/seeq/ether3*
 F:	drivers/scsi/arm/
 
-ARM/SHARK MACHINE SUPPORT
-M:	Alexander Schulz <alex@shark-linux.de>
-W:	http://www.shark-linux.de/shark.html
-S:	Maintained
-
 ARM/SAMSUNG ARM ARCHITECTURES
 M:	Ben Dooks <ben-linux@fluff.org>
 M:	Kukjin Kim <kgene.kim@samsung.com>

arch/arm/Kconfig

@@ -824,20 +824,6 @@ config ARCH_EXYNOS
 	help
 	  Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
 
-config ARCH_SHARK
-	bool "Shark"
-	select ARCH_USES_GETTIMEOFFSET
-	select CPU_SA110
-	select ISA
-	select ISA_DMA
-	select NEED_MACH_MEMORY_H
-	select PCI
-	select VIRT_TO_BUS
-	select ZONE_DMA
-	help
-	  Support for the StrongARM based Digital DNARD machine, also known
-	  as "Shark" (<http://www.shark-linux.de/shark.html>).
-
 config ARCH_DAVINCI
 	bool "TI DaVinci"
 	select ARCH_HAS_HOLES_MEMORYMODEL
@@ -1431,12 +1417,6 @@ config PCI_NANOENGINE
 config PCI_SYSCALL
 	def_bool PCI
 
-# Select the host bridge type
-config PCI_HOST_VIA82C505
-	bool
-	depends on PCI && ARCH_SHARK
-	default y
-
 config PCI_HOST_ITE8152
 	bool
 	depends on PCI && MACH_ARMCORE

arch/arm/Makefile

@@ -188,7 +188,6 @@ machine-$(CONFIG_ARCH_S5P64X0)		+= s5p64x0
 machine-$(CONFIG_ARCH_S5PC100)		+= s5pc100
 machine-$(CONFIG_ARCH_S5PV210)		+= s5pv210
 machine-$(CONFIG_ARCH_SA1100)		+= sa1100
-machine-$(CONFIG_ARCH_SHARK)		+= shark
 machine-$(CONFIG_ARCH_SHMOBILE) 	+= shmobile
 machine-$(CONFIG_ARCH_SHMOBILE_MULTI) 	+= shmobile
 machine-$(CONFIG_ARCH_SIRF)		+= prima2

arch/arm/boot/compressed/Makefile

@@ -44,10 +44,6 @@ ifeq ($(CONFIG_ARCH_ACORN),y)
 OBJS		+= ll_char_wr.o font.o
 endif
 
-ifeq ($(CONFIG_ARCH_SHARK),y)
-OBJS		+= head-shark.o ofw-shark.o
-endif
-
 ifeq ($(CONFIG_ARCH_SA1100),y)
 OBJS		+= head-sa1100.o
 endif

arch/arm/boot/compressed/head-shark.S

-/* The head-file for the Shark
- * by Alexander Schulz
- *
- * Does the following:
- * - get the memory layout from firmware. This can only be done as long as the mmu
- *   is still on.
- * - switch the mmu off, so we have physical addresses
- * - copy the kernel to 0x08508000. This is done to have a fixed address where the
- *   C-parts (misc.c) are executed. This address must be known at compile-time,
- *   but the load-address of the kernel depends on how much memory is installed.
- * - Jump to this location.
- * - Set r8 with 0, r7 with the architecture ID for head.S
- */
-
-#include <linux/linkage.h>
-
-#include <asm/assembler.h>
-	
-		.section	".start", "ax"
-
-		.arch armv4
-		b	__beginning
-	
-__ofw_data:	.long	0				@ the number of memory blocks
-		.space  128				@ (startaddr,size) ...
-		.space  128				@ bootargs
-		.align
-
-__beginning:	mov	r4, r0				@ save the entry to the firmware
-
-		mov	r0, #0xC0			@ disable irq and fiq
-		mov	r1, r0
-		mrs	r3, cpsr
-		bic	r2, r3, r0
-		eor	r2, r2, r1
-		msr	cpsr_c, r2
-
-		mov	r0, r4				@ get the Memory layout from firmware
-		adr	r1, __ofw_data
-		add	r2, r1, #4
-		mov	lr, pc
-		b	ofw_init
-		mov	r1, #0
-
-		adr	r2, __mmu_off			@ calculate physical address
-		sub	r2, r2, #0xf0000000		@ openprom maps us at f000 virt, 0e50 phys
-		adr	r0, __ofw_data
-		ldr	r0, [r0, #4]
-		add	r2, r2, r0
-		add	r2, r2, #0x00500000
-
-		mrc	p15, 0, r3, c1, c0
-		bic	r3, r3, #0xC			@ Write Buffer and DCache
-		bic	r3, r3, #0x1000			@ ICache
-		mcr	p15, 0, r3, c1, c0		@ disabled
-
-		mov	r0, #0
-		mcr	p15, 0, r0, c7, c7		@ flush I,D caches on v4
-		mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
-		mcr	p15, 0, r0, c8, c7		@ flush I,D TLBs on v4
-
-		bic	r3, r3, #0x1			@ MMU
-		mcr	p15, 0, r3, c1, c0		@ disabled
-
-		mov	pc, r2
-
-__copy_target:	.long	0x08507FFC
-__copy_end:	.long	0x08607FFC
-		
-		.word	_start
-		.word	__bss_start
-
-		.align
-__temp_stack:	.space 128
-
-__mmu_off:
-		adr	r0, __ofw_data			@ read the 1. entry of the memory map
-		ldr	r0, [r0, #4]
-		orr	r0, r0, #0x00600000
-		sub	r0, r0, #4
-	
-		ldr	r1, __copy_end
-		ldr	r3, __copy_target
-
-/* r0 = 0x0e600000 (current end of kernelcode)
- * r3 = 0x08508000 (where it should begin)
- * r1 = 0x08608000 (end of copying area, 1MB)
- * The kernel is compressed, so 1 MB should be enough.
- * copy the kernel to the beginning of physical memory
- * We start from the highest address, so we can copy
- * from 0x08500000 to 0x08508000 if we have only 8MB
- */
-
-/* As we get more 2.6-kernels it gets more and more
- * uncomfortable to be bound to kernel images of 1MB only.
- * So we add a loop here, to be able to copy some more.
- * Alexander Schulz 2005-07-17
- */
-
-		mov	r4, #3				@ How many megabytes to copy
-
-
-__MoveCode:	sub	r4, r4, #1
-	
-__Copy:		ldr	r2, [r0], #-4
-		str	r2, [r1], #-4
-		teq	r1, r3
-		bne	__Copy
-
-		/* The firmware maps us in blocks of 1 MB, the next block is
-		   _below_ the last one. So our decrementing source pointer
-		   ist right here, but the destination pointer must be increased
-		   by 2 MB */
-		add	r1, r1, #0x00200000
-		add	r3, r3, #0x00100000
-
-		teq	r4, #0
-		bne	__MoveCode
-
-
-		/* and jump to it */
-		adr	r2, __go_on			@ where we want to jump
-		adr	r0, __ofw_data			@ read the 1. entry of the memory map
-		ldr	r0, [r0, #4]
-		sub	r2, r2, r0			@ we are mapped add 0e50 now, sub that (-0e00)
-		sub	r2, r2, #0x00500000		@ -0050
-		ldr	r0, __copy_target		@ and add 0850 8000 instead
-		add	r0, r0, #4
-		add	r2, r2, r0
-		mov	pc, r2				@ and jump there
-
-__go_on:
-		adr	sp, __temp_stack
-		add	sp, sp, #128
-		adr	r0, __ofw_data
-		mov	lr, pc
-		b	create_params
-	
-		mov	r8, #0
-		mov	r7, #15

arch/arm/boot/compressed/ofw-shark.c

-/*
- * linux/arch/arm/boot/compressed/ofw-shark.c
- *
- * by Alexander Schulz
- *
- * This file is used to get some basic information
- * about the memory layout of the shark we are running
- * on. Memory is usually divided in blocks a 8 MB.
- * And bootargs are copied from OpenFirmware.
- */
-
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-
-
-asmlinkage void
-create_params (unsigned long *buffer)
-{
-	/* Is there a better address? Also change in mach-shark/core.c */
-	struct tag *tag = (struct tag *) 0x08003000;
-	int j,i,m,k,nr_banks,size;
-	unsigned char *c;
-
-	k = 0;
-
-	/* Head of the taglist */
-	tag->hdr.tag  = ATAG_CORE;
-	tag->hdr.size = tag_size(tag_core);
-	tag->u.core.flags = 1;
-	tag->u.core.pagesize = PAGE_SIZE;
-	tag->u.core.rootdev = 0;
-
-	/* Build up one tagged block for each memory region */
-	size=0;
-	nr_banks=(unsigned int) buffer[0];
-	for (j=0;j<nr_banks;j++){
-		/* search the lowest address and put it into the next entry   */
-		/* not a fast sort algorithm, but there are at most 8 entries */
-		/* and this is used only once anyway                          */
-		m=0xffffffff;
-		for (i=0;i<(unsigned int) buffer[0];i++){
-			if (buffer[2*i+1]<m) {
-				m=buffer[2*i+1];
-				k=i;
-			}
-		}
-	  
-		tag = tag_next(tag);
-		tag->hdr.tag = ATAG_MEM;
-		tag->hdr.size = tag_size(tag_mem32);
-		tag->u.mem.size = buffer[2*k+2];
-		tag->u.mem.start = buffer[2*k+1];
-
-		size += buffer[2*k+2];
-
-		buffer[2*k+1]=0xffffffff;                    /* mark as copied */
-	}
-	
-	/* The command line */
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_CMDLINE;
-	
-	c=(unsigned char *)(&buffer[34]);
-	j=0;
-	while (*c) tag->u.cmdline.cmdline[j++]=*c++;
-
-	tag->u.cmdline.cmdline[j]=0;
-	tag->hdr.size = (j + 7 + sizeof(struct tag_header)) >> 2;
-
-	/* Hardware revision */
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_REVISION;
-	tag->hdr.size = tag_size(tag_revision);
-	tag->u.revision.rev = ((unsigned char) buffer[33])-'0';
-
-	/* End of the taglist */
-	tag = tag_next(tag);
-	tag->hdr.tag = 0;
-	tag->hdr.size = 0;
-}
-
-
-typedef int (*ofw_handle_t)(void *);
-
-/* Everything below is called with a wrong MMU setting.
- * This means: no string constants, no initialization of
- * arrays, no global variables! This is ugly but I didn't
- * want to write this in assembler :-)
- */
-
-int
-of_decode_int(const unsigned char *p)
-{
-	unsigned int i = *p++ << 8;
-	i = (i + *p++) << 8;
-	i = (i + *p++) << 8;
-	return (i + *p);
-}
-  
-int
-OF_finddevice(ofw_handle_t openfirmware, char *name)
-{
-	unsigned int args[8];
-	char service[12];
-
-	service[0]='f';
-	service[1]='i';
-	service[2]='n';
-	service[3]='d';
-	service[4]='d';
-	service[5]='e';
-	service[6]='v';
-	service[7]='i';
-	service[8]='c';
-	service[9]='e';
-	service[10]='\0';
-
-	args[0]=(unsigned int)service;
-	args[1]=1;
-	args[2]=1;
-	args[3]=(unsigned int)name;
-
-	if (openfirmware(args) == -1)
-		return -1;
-	return args[4];
-}
-
-int
-OF_getproplen(ofw_handle_t openfirmware, int handle, char *prop)
-{
-	unsigned int args[8];
-	char service[12];
-
-	service[0]='g';
-	service[1]='e';
-	service[2]='t';
-	service[3]='p';
-	service[4]='r';
-	service[5]='o';
-	service[6]='p';
-	service[7]='l';
-	service[8]='e';
-	service[9]='n';
-	service[10]='\0';
-
-	args[0] = (unsigned int)service;
-	args[1] = 2;
-	args[2] = 1;
-	args[3] = (unsigned int)handle;
-	args[4] = (unsigned int)prop;
-
-	if (openfirmware(args) == -1)
-		return -1;
-	return args[5];
-}
-  
-int
-OF_getprop(ofw_handle_t openfirmware, int handle, char *prop, void *buf, unsigned int buflen)
-{
-	unsigned int args[8];
-	char service[8];
-
-	service[0]='g';
-	service[1]='e';
-	service[2]='t';
-	service[3]='p';
-	service[4]='r';
-	service[5]='o';
-	service[6]='p';
-	service[7]='\0';
-
-	args[0] = (unsigned int)service;
-	args[1] = 4;
-	args[2] = 1;
-	args[3] = (unsigned int)handle;
-	args[4] = (unsigned int)prop;
-	args[5] = (unsigned int)buf;
-	args[6] = buflen;
-
-	if (openfirmware(args) == -1)
-		return -1;
-	return args[7];
-}
-  
-asmlinkage void ofw_init(ofw_handle_t o, int *nomr, int *pointer)
-{
-	int phandle,i,mem_len,buffer[32];
-	char temp[15];
-  
-	temp[0]='/';
-	temp[1]='m';
-	temp[2]='e';
-	temp[3]='m';
-	temp[4]='o';
-	temp[5]='r';
-	temp[6]='y';
-	temp[7]='\0';
-
-	phandle=OF_finddevice(o,temp);
-
-	temp[0]='r';
-	temp[1]='e';
-	temp[2]='g';
-	temp[3]='\0';
-
-	mem_len = OF_getproplen(o,phandle, temp);
-	OF_getprop(o,phandle, temp, buffer, mem_len);
-	*nomr=mem_len >> 3;
-
-	for (i=0; i<=mem_len/4; i++) pointer[i]=of_decode_int((const unsigned char *)&buffer[i]);
-
-	temp[0]='/';
-	temp[1]='c';
-	temp[2]='h';
-	temp[3]='o';
-	temp[4]='s';
-	temp[5]='e';
-	temp[6]='n';
-	temp[7]='\0';
-
-	phandle=OF_finddevice(o,temp);
-
-	temp[0]='b';
-	temp[1]='o';
-	temp[2]='o';
-	temp[3]='t';
-	temp[4]='a';
-	temp[5]='r';
-	temp[6]='g';
-	temp[7]='s';
-	temp[8]='\0';
-
-	mem_len = OF_getproplen(o,phandle, temp);
-	OF_getprop(o,phandle, temp, buffer, mem_len);
-	if (mem_len > 128) mem_len=128;
-	for (i=0; i<=mem_len/4; i++) pointer[i+33]=buffer[i];
-	pointer[i+33]=0;
-
-	temp[0]='/';
-	temp[1]='\0';
-	phandle=OF_finddevice(o,temp);
-	temp[0]='b';
-	temp[1]='a';
-	temp[2]='n';
-	temp[3]='n';
-	temp[4]='e';
-	temp[5]='r';
-	temp[6]='-';
-	temp[7]='n';
-	temp[8]='a';
-	temp[9]='m';
-	temp[10]='e';
-	temp[11]='\0';
-	mem_len = OF_getproplen(o,phandle, temp);
-	OF_getprop(o,phandle, temp, buffer, mem_len);
-	* ((unsigned char *) &pointer[32]) = ((unsigned char *) buffer)[mem_len-2];
-}

arch/arm/common/Makefile

@@ -6,7 +6,6 @@ obj-y				+= firmware.o
 
 obj-$(CONFIG_ICST)		+= icst.o
 obj-$(CONFIG_SA1111)		+= sa1111.o
-obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
 obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
 obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
 obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o

arch/arm/common/via82c505.c

-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-
-#include <asm/mach/pci.h>
-
-#define MAX_SLOTS		7
-
-#define CONFIG_CMD(bus, devfn, where)   (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
-
-static int
-via82c505_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		      int size, u32 *value)
-{
-	outl(CONFIG_CMD(bus,devfn,where),0xCF8);
-	switch (size) {
-	case 1:
-		*value=inb(0xCFC + (where&3));
-		break;
-	case 2:
-		*value=inw(0xCFC + (where&2));
-		break;
-	case 4:
-		*value=inl(0xCFC);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-via82c505_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		       int size, u32 value)
-{
-	outl(CONFIG_CMD(bus,devfn,where),0xCF8);
-	switch (size) {
-	case 1:
-		outb(value, 0xCFC + (where&3));
-		break;
-	case 2:
-		outw(value, 0xCFC + (where&2));
-		break;
-	case 4:
-		outl(value, 0xCFC);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops via82c505_ops = {
-	.read	= via82c505_read_config,
-	.write	= via82c505_write_config,
-};
-
-void __init via82c505_preinit(void)
-{
-	printk(KERN_DEBUG "PCI: VIA 82c505\n");
-	if (!request_region(0xA8,2,"via config")) {
-		printk(KERN_WARNING"VIA 82c505: Unable to request region 0xA8\n");
-		return;
-	}
-	if (!request_region(0xCF8,8,"pci config")) {
-		printk(KERN_WARNING"VIA 82c505: Unable to request region 0xCF8\n");
-		release_region(0xA8, 2);
-		return;
-	}
-
-	/* Enable compatible Mode */
-	outb(0x96,0xA8);
-	outb(0x18,0xA9);
-	outb(0x93,0xA8);
-	outb(0xd0,0xA9);
-
-}
-
-int __init via82c505_setup(int nr, struct pci_sys_data *sys)
-{
-	return (nr == 0);
-}

arch/arm/configs/shark_defconfig

-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_SHARK=y
-CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_CS89x0=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_PRINTER=m
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_CYBER2000=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=m
-CONFIG_SOUND_PRIME=m
-CONFIG_SOUND_OSS=m
-CONFIG_SOUND_SB=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFSD=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y

arch/arm/include/asm/mach/pci.h

@@ -106,8 +106,4 @@ extern int dc21285_setup(int nr, struct pci_sys_data *);
 extern void dc21285_preinit(void);
 extern void dc21285_postinit(void);
 
-extern struct pci_ops via82c505_ops;
-extern int via82c505_setup(int nr, struct pci_sys_data *);
-extern void via82c505_init(void *sysdata);
-
 #endif /* __ASM_MACH_PCI_H */

arch/arm/lib/Makefile

@@ -41,7 +41,6 @@ else
 endif
 
 lib-$(CONFIG_ARCH_RPC)		+= ecard.o io-acorn.o floppydma.o
-lib-$(CONFIG_ARCH_SHARK)	+= io-shark.o
 
 $(obj)/csumpartialcopy.o:	$(obj)/csumpartialcopygeneric.S
 $(obj)/csumpartialcopyuser.o:	$(obj)/csumpartialcopygeneric.S

arch/arm/lib/io-shark.c

-/*
- *  linux/arch/arm/lib/io-shark.c
- *
- *  by Alexander Schulz
- *
- * derived from:
- * linux/arch/arm/lib/io-ebsa.S
- * Copyright (C) 1995, 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */

arch/arm/mach-shark/Makefile

-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			:= core.o dma.o irq.o pci.o leds.o
-obj-m			:=
-obj-n			:=
-obj-			:=

arch/arm/mach-shark/Makefile.boot

-   zreladdr-y	+= 0x08008000
-

arch/arm/mach-shark/core.c

-/*
- *  linux/arch/arm/mach-shark/arch.c
- *
- *  Architecture specific stuff.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/serial_8250.h>
-#include <linux/io.h>
-#include <linux/cpu.h>
-#include <linux/reboot.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/param.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#define ROMCARD_SIZE            0x08000000
-#define ROMCARD_START           0x10000000
-
-static void shark_restart(enum reboot_mode mode, const char *cmd)
-{
-        short temp;
-        /* Reset the Machine via pc[3] of the sequoia chipset */
-        outw(0x09,0x24);
-        temp=inw(0x26);
-        temp = temp | (1<<3) | (1<<10);
-        outw(0x09,0x24);
-        outw(temp,0x26);
-}
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.iobase		= 0x3f8,
-		.irq		= 4,
-		.uartclk	= 1843200,
-		.regshift	= 0,
-		.iotype		= UPIO_PORT,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{
-		.iobase		= 0x2f8,
-		.irq		= 3,
-		.uartclk	= 1843200,
-		.regshift	= 0,
-		.iotype		= UPIO_PORT,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-static struct resource rtc_resources[] = {
-	[0] = {
-		.start	= 0x70,
-		.end	= 0x73,
-		.flags	= IORESOURCE_IO,
-	},
-	[1] = {
-		.start	= IRQ_ISA_RTC_ALARM,
-		.end	= IRQ_ISA_RTC_ALARM,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device rtc_device = {
-	.name		= "rtc_cmos",
-	.id		= -1,
-	.resource	= rtc_resources,
-	.num_resources	= ARRAY_SIZE(rtc_resources),
-};
-
-static int __init shark_init(void)
-{
-	int ret;
-
-	if (machine_is_shark())
-	{
-	        ret = platform_device_register(&rtc_device);
-		if (ret) printk(KERN_ERR "Unable to register RTC device: %d\n", ret);
-		ret = platform_device_register(&serial_device);
-		if (ret) printk(KERN_ERR "Unable to register Serial device: %d\n", ret);
-	}
-	return 0;
-}
-
-arch_initcall(shark_init);
-
-extern void shark_init_irq(void);
-
-#define IRQ_TIMER 0
-#define HZ_TIME ((1193180 + HZ/2) / HZ)
-
-static irqreturn_t
-shark_timer_interrupt(int irq, void *dev_id)
-{
-	timer_tick();
-	return IRQ_HANDLED;
-}
-
-static struct irqaction shark_timer_irq = {
-	.name		= "Shark Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= shark_timer_interrupt,
-};
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-static void __init shark_timer_init(void)
-{
-	outb(0x34, 0x43);               /* binary, mode 0, LSB/MSB, Ch 0 */
-	outb(HZ_TIME & 0xff, 0x40);     /* LSB of count */
-	outb(HZ_TIME >> 8, 0x40);
-
-	setup_irq(IRQ_TIMER, &shark_timer_irq);
-}
-
-static void shark_init_early(void)
-{
-	cpu_idle_poll_ctrl(true);
-}
-
-MACHINE_START(SHARK, "Shark")
-	/* Maintainer: Alexander Schulz */
-	.atag_offset	= 0x3000,
-	.init_early	= shark_init_early,
-	.init_irq	= shark_init_irq,
-	.init_time	= shark_timer_init,
-	.dma_zone_size	= SZ_4M,
-	.restart	= shark_restart,
-MACHINE_END

arch/arm/mach-shark/dma.c

-/*
- *  linux/arch/arm/mach-shark/dma.c
- *
- *  by Alexander Schulz
- *
- *  derived from:
- *  arch/arm/kernel/dma-ebsa285.c
- *  Copyright (C) 1998 Phil Blundell
- */
-
-#include <linux/init.h>
-
-#include <asm/dma.h>
-#include <asm/mach/dma.h>
-
-static int __init shark_dma_init(void)
-{
-#ifdef CONFIG_ISA_DMA
-	isa_init_dma();
-#endif
-	return 0;
-}
-core_initcall(shark_dma_init);

arch/arm/mach-shark/include/mach/debug-macro.S

-/* arch/arm/mach-shark/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x3f8
-		orr	\rv, \rp, #0xfe000000
-		orr	\rv, \rv, #0x00e00000
-		orr	\rp, \rp, #0x40000000
-		.endm
-
-		.macro	senduart,rd,rx
-		strb	\rd, [\rx]
-		.endm
-
-		.macro waituart,rd,rx
-		.endm
-
-		.macro	busyuart,rd,rx
-		mov	\rd, #0
-1001:		add	\rd, \rd, #1
-		teq	\rd, #0x10000
-		bne	1001b
-		.endm
-

arch/arm/mach-shark/include/mach/entry-macro.S

-/*
- * arch/arm/mach-shark/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Shark platform
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-		.macro  get_irqnr_preamble, base, tmp
-		mov	\base, #0xfe000000
-		orr	\base, \base, #0x00e00000
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		mov	\irqstat, #0x0C
-		strb	\irqstat, [\base, #0x20]	@outb(0x0C, 0x20) /* Poll command */
-		ldrb	\irqnr, [\base, #0x20]		@irq = inb(0x20) & 7
-		and	\irqstat, \irqnr, #0x80
-		teq	\irqstat, #0
-		beq	43f
-		and	\irqnr, \irqnr, #7
-		teq	\irqnr, #2
-		bne	44f
-43:		mov	\irqstat, #0x0C
-		strb	\irqstat, [\base, #0xa0]	@outb(0x0C, 0xA0) /* Poll command */
-		ldrb	\irqnr, [\base, #0xa0]		@irq = (inb(0xA0) & 7) + 8
-		and	\irqstat, \irqnr, #0x80
-		teq	\irqstat, #0
-		beq	44f
-		and	\irqnr, \irqnr, #7
-		add	\irqnr, \irqnr, #8
-44:		teq	\irqstat, #0
-		.endm
-

arch/arm/mach-shark/include/mach/framebuffer.h

-/*
- * arch/arm/mach-shark/include/mach/framebuffer.h
- *
- * by Alexander Schulz
- *
- */
-
-#ifndef __ASM_ARCH_FRAMEBUFFER_H
-#define __ASM_ARCH_FRAMEBUFFER_H
-
-/* defines for the Framebuffer */
-#define FB_START		0x06000000
-#define FB_SIZE			0x01000000
-
-#endif
-

arch/arm/mach-shark/include/mach/hardware.h

-/*
- * arch/arm/mach-shark/include/mach/hardware.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-ebsa110/include/mach/hardware.h
- * Copyright (C) 1996-1999 Russell King.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define UNCACHEABLE_ADDR        0xdf010000
-
-#endif
-

arch/arm/mach-shark/include/mach/irqs.h

-/*
- * arch/arm/mach-shark/include/mach/irqs.h
- *
- * by Alexander Schulz
- */
-
-#define NR_IRQS			16
-
-#define IRQ_ISA_KEYBOARD	 1
-#define IRQ_ISA_RTC_ALARM	 8
-#define I8042_KBD_IRQ		 1
-#define I8042_AUX_IRQ		12
-#define IRQ_HARDDISK            14

arch/arm/mach-shark/include/mach/isa-dma.h

-/*
- * arch/arm/mach-shark/include/mach/isa-dma.h
- *
- * by Alexander Schulz
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#define MAX_DMA_CHANNELS	8
-#define DMA_ISA_CASCADE         4
-
-#endif /* _ASM_ARCH_DMA_H */
-

arch/arm/mach-shark/include/mach/memory.h

-/*
- * arch/arm/mach-shark/include/mach/memory.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-ebsa110/include/mach/memory.h
- * Copyright (c) 1996-1999 Russell King.
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET     UL(0x08000000)
-
-/*
- * Cache flushing area
- */
-#define FLUSH_BASE_PHYS		0x80000000
-#define FLUSH_BASE		0xdf000000
-
-#endif

arch/arm/mach-shark/include/mach/timex.h

-/*
- * arch/arm/mach-shark/include/mach/timex.h
- *
- * by Alexander Schulz
- */
-
-#define CLOCK_TICK_RATE 1193180

arch/arm/mach-shark/include/mach/uncompress.h

-/*
- * arch/arm/mach-shark/include/mach/uncompress.h
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-footbridge/include/mach/uncompress.h
- * Copyright (C) 1996,1997,1998 Russell King
- */
-
-#define SERIAL_BASE ((volatile unsigned char *)0x400003f8)
-
-static inline void putc(int c)
-{
-	volatile int t;
-
-	SERIAL_BASE[0] = c;
-	t=0x10000;
-	while (t--);
-}
-
-static inline void flush(void)
-{
-}
-
-#ifdef DEBUG
-static void putn(unsigned long z)
-{
-	int i;
-	char x;
-
-	putc('0');
-	putc('x');
-	for (i=0;i<8;i++) {
-		x='0'+((z>>((7-i)*4))&0xf);
-		if (x>'9') x=x-'0'+'A'-10;
-		putc(x);
-	}
-}
-
-static void putr()
-{
-	putc('\n');
-	putc('\r');
-}
-#endif
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()

arch/arm/mach-shark/irq.c

-/*
- *  linux/arch/arm/mach-shark/irq.c
- *
- * by Alexander Schulz
- *
- * derived from linux/arch/ppc/kernel/i8259.c and:
- * arch/arm/mach-ebsa110/include/mach/irq.h
- * Copyright (C) 1996-1998 Russell King
- */
-
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-/*
- * 8259A PIC functions to handle ISA devices:
- */
-
-/*
- * This contains the irq mask for both 8259A irq controllers,
- * Let through the cascade-interrupt no. 2 (ff-(1<<2)==fb)
- */
-static unsigned char cached_irq_mask[2] = { 0xfb, 0xff };
-
-/*
- * These have to be protected by the irq controller spinlock
- * before being called.
- */
-static void shark_disable_8259A_irq(struct irq_data *d)
-{
-	unsigned int mask;
-	if (d->irq<8) {
-	  mask = 1 << d->irq;
-	  cached_irq_mask[0] |= mask;
-	  outb(cached_irq_mask[1],0xA1);
-	} else {
-	  mask = 1 << (d->irq-8);
-	  cached_irq_mask[1] |= mask;
-	  outb(cached_irq_mask[0],0x21);
-	}
-}
-
-static void shark_enable_8259A_irq(struct irq_data *d)
-{
-	unsigned int mask;
-	if (d->irq<8) {
-	  mask = ~(1 << d->irq);
-	  cached_irq_mask[0] &= mask;
-	  outb(cached_irq_mask[0],0x21);
-	} else {
-	  mask = ~(1 << (d->irq-8));
-	  cached_irq_mask[1] &= mask;
-	  outb(cached_irq_mask[1],0xA1);
-	}
-}
-
-static void shark_ack_8259A_irq(struct irq_data *d){}
-
-static irqreturn_t bogus_int(int irq, void *dev_id)
-{
-	printk("Got interrupt %i!\n",irq);
-	return IRQ_NONE;
-}
-
-static struct irqaction cascade;
-
-static struct irq_chip fb_chip = {
-	.name		= "XT-PIC",
-	.irq_ack	= shark_ack_8259A_irq,
-	.irq_mask	= shark_disable_8259A_irq,
-	.irq_unmask	= shark_enable_8259A_irq,
-};
-
-void __init shark_init_irq(void)
-{
-	int irq;
-
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		irq_set_chip_and_handler(irq, &fb_chip, handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	/* init master interrupt controller */
-	outb(0x11, 0x20); /* Start init sequence, edge triggered (level: 0x19)*/
-	outb(0x00, 0x21); /* Vector base */
-	outb(0x04, 0x21); /* Cascade (slave) on IRQ2 */
-	outb(0x03, 0x21); /* Select 8086 mode , auto eoi*/
-	outb(0x0A, 0x20);
-	/* init slave interrupt controller */
-	outb(0x11, 0xA0); /* Start init sequence, edge triggered */
-	outb(0x08, 0xA1); /* Vector base */
-	outb(0x02, 0xA1); /* Cascade (slave) on IRQ2 */
-	outb(0x03, 0xA1); /* Select 8086 mode, auto eoi */
-	outb(0x0A, 0xA0);
-	outb(cached_irq_mask[1],0xA1);
-	outb(cached_irq_mask[0],0x21);
-	//request_region(0x20,0x2,"pic1");
-	//request_region(0xA0,0x2,"pic2");
-
-	cascade.handler = bogus_int;
-	cascade.name = "cascade";
-	setup_irq(2,&cascade);
-}
-

arch/arm/mach-shark/leds.c

-/*
- * DIGITAL Shark LED control routines.
- *
- * Driver for the 3 user LEDs found on the Shark
- * Based on Versatile and RealView machine LED code
- *
- * License terms: GNU General Public License (GPL) version 2
- * Author: Bryan Wu <bryan.wu@canonical.com>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-struct shark_led {
-	struct led_classdev cdev;
-	u8 mask;
-};
-
-/*
- * The triggers lines up below will only be used if the
- * LED triggers are compiled in.
- */
-static const struct {
-	const char *name;
-	const char *trigger;
-} shark_leds[] = {
-	{ "shark:amber0", "default-on", },	/* Bit 5 */
-	{ "shark:green", "heartbeat", },	/* Bit 6 */
-	{ "shark:amber1", "cpu0" },		/* Bit 7 */
-};
-
-static u16 led_reg_read(void)
-{
-	outw(0x09, 0x24);
-	return inw(0x26);
-}
-
-static void led_reg_write(u16 value)
-{
-	outw(0x09, 0x24);
-	outw(value, 0x26);
-}
-
-static void shark_led_set(struct led_classdev *cdev,
-			      enum led_brightness b)
-{
-	struct shark_led *led = container_of(cdev,
-						 struct shark_led, cdev);
-	u16 reg = led_reg_read();
-
-	if (b != LED_OFF)
-		reg |= led->mask;
-	else
-		reg &= ~led->mask;
-
-	led_reg_write(reg);
-}
-
-static enum led_brightness shark_led_get(struct led_classdev *cdev)
-{
-	struct shark_led *led = container_of(cdev,
-						 struct shark_led, cdev);
-	u16 reg = led_reg_read();
-
-	return (reg & led->mask) ? LED_FULL : LED_OFF;
-}
-
-static int __init shark_leds_init(void)
-{
-	int i;
-	u16 reg;
-
-	if (!machine_is_shark())
-		return -ENODEV;
-
-	for (i = 0; i < ARRAY_SIZE(shark_leds); i++) {
-		struct shark_led *led;
-
-		led = kzalloc(sizeof(*led), GFP_KERNEL);
-		if (!led)
-			break;
-
-		led->cdev.name = shark_leds[i].name;
-		led->cdev.brightness_set = shark_led_set;
-		led->cdev.brightness_get = shark_led_get;
-		led->cdev.default_trigger = shark_leds[i].trigger;
-
-		/* Count in 5 bits offset */
-		led->mask = BIT(i + 5);
-
-		if (led_classdev_register(NULL, &led->cdev) < 0) {
-			kfree(led);
-			break;
-		}
-	}
-
-	/* Make LEDs independent of power-state */
-	request_region(0x24, 4, "led_reg");
-	reg = led_reg_read();
-	reg |= 1 << 10;
-	led_reg_write(reg);
-
-	return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(shark_leds_init);
-#endif

arch/arm/mach-shark/pci.c

-/*
- *  linux/arch/arm/mach-shark/pci.c
- *
- *  PCI bios-type initialisation for PCI machines
- *
- *  Bits taken from various places.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <video/vga.h>
-
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-#define IO_START	0x40000000
-
-static int __init shark_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (dev->bus->number == 0)
-		if (dev->devfn == 0)
-			return 255;
-		else
-			return 11;
-	else
-		return 255;
-}
-
-extern void __init via82c505_preinit(void);
-
-static struct hw_pci shark_pci __initdata = {
-	.setup		= via82c505_setup,
-	.map_irq	= shark_map_irq,
-	.nr_controllers = 1,
-	.ops		= &via82c505_ops,
-	.preinit	= via82c505_preinit,
-};
-
-static int __init shark_pci_init(void)
-{
-	if (!machine_is_shark())
-		return -ENODEV;
-
-	pcibios_min_io = 0x6000;
-	pcibios_min_mem = 0x50000000;
-	vga_base = 0xe8000000;
-
-	pci_ioremap_io(0, IO_START);
-
-	pci_common_init(&shark_pci);
-
-	return 0;
-}
-
-subsys_initcall(shark_pci_init);

drivers/block/Kconfig

@@ -505,7 +505,7 @@ config VIRTIO_BLK
 config BLK_DEV_HD
 	bool "Very old hard disk (MFM/RLL/IDE) driver"
 	depends on HAVE_IDE
-	depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN
+	depends on !ARM || ARCH_RPC || BROKEN
 	help
 	  This is a very old hard disk driver that lacks the enhanced
 	  functionality of the newer ones.

drivers/ide/Kconfig

@@ -197,8 +197,8 @@ comment "IDE chipset support/bugfixes"
 
 config IDE_GENERIC
 	tristate "generic/default IDE chipset support"
-	depends on ALPHA || X86 || IA64 || M32R || MIPS || ARCH_RPC || ARCH_SHARK
-	default ARM && (ARCH_RPC || ARCH_SHARK)
+	depends on ALPHA || X86 || IA64 || M32R || MIPS || ARCH_RPC
+	default ARM && ARCH_RPC
 	help
 	  This is the generic IDE driver.  This driver attaches to the
 	  fixed legacy ports (e.g. on PCs 0x1f0/0x170, 0x1e8/0x168 and

drivers/input/serio/Kconfig

@@ -21,7 +21,7 @@ if SERIO
 config SERIO_I8042
 	tristate "i8042 PC Keyboard controller" if EXPERT || !X86
 	default y
-	depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && \
+	depends on !PARISC && (!ARM || FOOTBRIDGE_HOST) && \
 		   (!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN && !S390 && \
 		   !ARC
 	help

drivers/video/cyber2000fb.c

@@ -1641,67 +1641,6 @@ static void cyberpro_common_resume(struct cfb_info *cfb)
 	cyber2000fb_set_par(&cfb->fb);
 }
 
-#ifdef CONFIG_ARCH_SHARK
-
-#include <mach/framebuffer.h>
-
-static int cyberpro_vl_probe(void)
-{
-	struct cfb_info *cfb;
-	int err = -ENOMEM;
-
-	if (!request_mem_region(FB_START, FB_SIZE, "CyberPro2010"))
-		return err;
-
-	cfb = cyberpro_alloc_fb_info(ID_CYBERPRO_2010, "CyberPro2010");
-	if (!cfb)
-		goto failed_release;
-
-	cfb->irq = -1;
-	cfb->region = ioremap(FB_START, FB_SIZE);
-	if (!cfb->region)
-		goto failed_ioremap;
-
-	cfb->regs = cfb->region + MMIO_OFFSET;
-	cfb->fb.device = NULL;
-	cfb->fb.fix.mmio_start = FB_START + MMIO_OFFSET;
-	cfb->fb.fix.smem_start = FB_START;
-
-	/*
-	 * Bring up the hardware.  This is expected to enable access
-	 * to the linear memory region, and allow access to the memory
-	 * mapped registers.  Also, mem_ctl1 and mem_ctl2 must be
-	 * initialised.
-	 */
-	cyber2000fb_writeb(0x18, 0x46e8, cfb);
-	cyber2000fb_writeb(0x01, 0x102, cfb);
-	cyber2000fb_writeb(0x08, 0x46e8, cfb);
-	cyber2000fb_writeb(EXT_BIU_MISC, 0x3ce, cfb);
-	cyber2000fb_writeb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf, cfb);
-
-	cfb->mclk_mult = 0xdb;
-	cfb->mclk_div  = 0x54;
-
-	err = cyberpro_common_probe(cfb);
-	if (err)
-		goto failed;
-
-	if (int_cfb_info == NULL)
-		int_cfb_info = cfb;
-
-	return 0;
-
-failed:
-	iounmap(cfb->region);
-failed_ioremap:
-	cyberpro_free_fb_info(cfb);
-failed_release:
-	release_mem_region(FB_START, FB_SIZE);
-
-	return err;
-}
-#endif /* CONFIG_ARCH_SHARK */
-
 /*
  * PCI specific support.
  */
@@ -1948,28 +1887,19 @@ static int __init cyber2000fb_init(void)
 	cyber2000fb_setup(option);
 #endif
 
-#ifdef CONFIG_ARCH_SHARK
-	err = cyberpro_vl_probe();
-	if (!err)
-		ret = 0;
-#endif
-#ifdef CONFIG_PCI
 	err = pci_register_driver(&cyberpro_driver);
 	if (!err)
 		ret = 0;
-#endif
 
 	return ret ? err : 0;
 }
 module_init(cyber2000fb_init);
 
-#ifndef CONFIG_ARCH_SHARK
 static void __exit cyberpro_exit(void)
 {
 	pci_unregister_driver(&cyberpro_driver);
 }
 module_exit(cyberpro_exit);
-#endif
 
 MODULE_AUTHOR("Russell King");
 MODULE_DESCRIPTION("CyberPro 2000, 2010 and 5000 framebuffer driver");