Commit ec16e9bc authored by Anson Huang's avatar Anson Huang Committed by Shawn Guo

ARM: dts: imx6sll: add gpio-ranges property

Add "gpio-ranges" property to establish connections between GPIOs
and PINs on i.MX6SLL pinctrl driver, for details, please refer to
Documentation/devicetree/bindings/gpio/gpio.txt of "gpio-ranges"
property.
Signed-off-by: default avatarAnson Huang <Anson.Huang@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 57361846
......@@ -379,6 +379,7 @@ gpio1: gpio@209c000 {
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 94 7>, <&iomuxc 7 25 25>;
};
gpio2: gpio@20a0000 {
......@@ -390,6 +391,7 @@ gpio2: gpio@20a0000 {
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 50 32>;
};
gpio3: gpio@20a4000 {
......@@ -401,6 +403,9 @@ gpio3: gpio@20a4000 {
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 82 12>, <&iomuxc 12 103 4>,
<&iomuxc 16 101 2>, <&iomuxc 18 5 1>,
<&iomuxc 21 6 11>;
};
gpio4: gpio@20a8000 {
......@@ -412,6 +417,15 @@ gpio4: gpio@20a8000 {
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 17 8>, <&iomuxc 8 107 8>,
<&iomuxc 16 151 1>, <&iomuxc 17 149 1>,
<&iomuxc 18 146 1>, <&iomuxc 19 144 1>,
<&iomuxc 20 142 1>, <&iomuxc 21 143 1>,
<&iomuxc 22 150 1>, <&iomuxc 23 148 1>,
<&iomuxc 24 147 1>, <&iomuxc 25 145 1>,
<&iomuxc 26 152 1>, <&iomuxc 27 125 1>,
<&iomuxc 28 131 1>, <&iomuxc 29 134 1>,
<&iomuxc 30 129 1>, <&iomuxc 31 133 1>;
};
gpio5: gpio@20ac000 {
......@@ -423,6 +437,17 @@ gpio5: gpio@20ac000 {
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 135 1>, <&iomuxc 1 128 1>,
<&iomuxc 2 132 1>, <&iomuxc 3 130 1>,
<&iomuxc 4 127 1>, <&iomuxc 5 126 1>,
<&iomuxc 6 120 1>, <&iomuxc 7 123 1>,
<&iomuxc 8 118 1>, <&iomuxc 9 122 1>,
<&iomuxc 10 124 1>, <&iomuxc 11 117 1>,
<&iomuxc 12 121 1>, <&iomuxc 13 119 1>,
<&iomuxc 14 116 1>, <&iomuxc 15 115 1>,
<&iomuxc 16 140 2>, <&iomuxc 18 136 1>,
<&iomuxc 19 138 1>, <&iomuxc 20 139 1>,
<&iomuxc 21 137 1>;
};
gpio6: gpio@20b0000 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment