Commit ecc41d5e authored by Randy Dunlap's avatar Randy Dunlap Committed by Linus Torvalds

[PATCH] fb: straighten up fb drivers menu

Arrange frame buffer menu:
- puts all Epson drivers together
- removes split of FB_PXA and FB_PXA_PARAMETERS by FB_W100
- results in PXA, W100, Epson, S3C2410, & Virtual FB drivers being
  presented at the same menu level as all other FB drivers
Signed-off-by: default avatarRandy Dunlap <rdunlap@xenotime.net>
Acked-by: default avatar"Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent e65c0850
......@@ -638,6 +638,50 @@ config FB_EPSON1355
framebuffer. Product specs at
<http://www.erd.epson.com/vdc/html/products.htm>.
config FB_E1356
tristate "Epson SED1356 framebuffer support"
depends on FB && EXPERIMENTAL && PCI && MIPS
config PB1000_CRT
bool "Use CRT on Pb1000 (J65)"
depends on MIPS_PB1000=y && FB_E1356
config PB1000_NTSC
bool "Use Compsite NTSC on Pb1000 (J63)"
depends on MIPS_PB1000=y && FB_E1356
config PB1000_TFT
bool "Use TFT Panel on Pb1000 (J64)"
depends on MIPS_PB1000=y && FB_E1356
config PB1500_CRT
bool "Use CRT on Pb1500 " if MIPS_PB1500=y
depends on FB_E1356
config PB1500_CRT
prompt "Use CRT on Pb1100 "
depends on FB_E1356 && MIPS_PB1100=y
config PB1500_TFT
bool "Use TFT Panel on Pb1500 " if MIPS_PB1500=y
depends on FB_E1356
config PB1500_TFT
prompt "Use TFT Panel on Pb1100 "
depends on FB_E1356 && MIPS_PB1100=y
config FB_S1D13XXX
tristate "Epson S1D13XXX framebuffer support"
depends on FB
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_SOFT_CURSOR
help
Support for S1D13XXX framebuffer device family (currently only
working with S1D13806). Product specs at
<http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
config FB_NVIDIA
tristate "nVidia Framebuffer Support"
depends on FB && PCI
......@@ -1253,38 +1297,6 @@ config FB_PM3
similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
and maybe other boards.
config FB_E1356
tristate "Epson SED1356 framebuffer support"
depends on FB && EXPERIMENTAL && PCI && MIPS
config PB1000_CRT
bool "Use CRT on Pb1000 (J65)"
depends on MIPS_PB1000=y && FB_E1356
config PB1000_NTSC
bool "Use Compsite NTSC on Pb1000 (J63)"
depends on MIPS_PB1000=y && FB_E1356
config PB1000_TFT
bool "Use TFT Panel on Pb1000 (J64)"
depends on MIPS_PB1000=y && FB_E1356
config PB1500_CRT
bool "Use CRT on Pb1500 " if MIPS_PB1500=y
depends on FB_E1356
config PB1500_CRT
prompt "Use CRT on Pb1100 "
depends on FB_E1356 && MIPS_PB1100=y
config PB1500_TFT
bool "Use TFT Panel on Pb1500 " if MIPS_PB1500=y
depends on FB_E1356
config PB1500_TFT
prompt "Use TFT Panel on Pb1100 "
depends on FB_E1356 && MIPS_PB1100=y
config FB_AU1100
bool "Au1100 LCD Driver"
depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y
......@@ -1476,23 +1488,6 @@ config FB_PXA
If unsure, say N.
config FB_W100
tristate "W100 frame buffer support"
depends on FB && PXA_SHARPSL
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_SOFT_CURSOR
---help---
Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called vfb. If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>.
If unsure, say N.
config FB_PXA_PARAMETERS
bool "PXA LCD command line parameters"
default n
......@@ -1510,17 +1505,22 @@ config FB_PXA_PARAMETERS
<file:Documentation/fb/pxafb.txt> describes the available parameters.
config FB_S1D13XXX
tristate "Epson S1D13XXX framebuffer support"
depends on FB
config FB_W100
tristate "W100 frame buffer support"
depends on FB && PXA_SHARPSL
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_SOFT_CURSOR
help
Support for S1D13XXX framebuffer device family (currently only
working with S1D13806). Product specs at
<http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
---help---
Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called vfb. If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>.
If unsure, say N.
config FB_S3C2410
tristate "S3C2410 LCD framebuffer support"
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment