Merge tag 'mmc-updates-for-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC update from Chris Ball:
 "MMC highlights for 3.9:

  Core:
   - Support for packed commands in eMMC 4.5.  (This requires a host
     capability to be turned on.  It increases write throughput by 20%+,
     but may also increase average write latency; more testing needed.)
   - Add DT bindings for capability flags.
   - Add mmc_of_parse() for shared DT parsing between drivers.

  Drivers:
   - android-goldfish: New MMC driver for the Android Goldfish emulator.
   - mvsdio: Add DT bindings, pinctrl, use slot-gpio for card detection.
   - omap_hsmmc: Fix boot hangs with RPMB partitions.
   - sdhci-bcm2835: New driver for controller used by Raspberry Pi.
   - sdhci-esdhc-imx: Add 8-bit data, auto CMD23 support, use slot-gpio.
   - sh_mmcif: Add support for eMMC DDR, bundled MMCIF IRQs.
   - tmio_mmc: Add DT bindings, support for vccq regulator"

* tag 'mmc-updates-for-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (92 commits)
  mmc: tegra: assume CONFIG_OF, remove platform data
  mmc: add DT bindings for more MMC capability flags
  mmc: tmio: add support for the VccQ regulator
  mmc: tmio: remove unused and deprecated symbols
  mmc: sh_mobile_sdhi: use managed resource allocations
  mmc: sh_mobile_sdhi: remove unused .pdata field
  mmc: tmio-mmc: parse device-tree bindings
  mmc: tmio-mmc: define device-tree bindings
  mmc: sh_mmcif: use mmc_of_parse() to parse standard MMC DT bindings
  mmc: (cosmetic) remove "extern" from function declarations
  mmc: provide a standard MMC device-tree binding parser centrally
  mmc: detailed definition of CD and WP MMC line polarities in DT
  mmc: sdhi, tmio: only check flags in tmio-mmc driver proper
  mmc: sdhci: Fix parameter of sdhci_do_start_signal_voltage_switch()
  mmc: sdhci: check voltage range only on regulators aware of voltage value
  mmc: bcm2835: set SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
  mmc: support packed write command for eMMC4.5 devices
  mmc: add packed command feature of eMMC4.5
  mmc: rtsx: remove driving adjustment
  mmc: use regulator_can_change_voltage() instead of regulator_count_voltages
  ...

Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhci.txt

+Broadcom BCM2835 SDHCI controller
+
+This file documents differences between the core properties described
+by mmc.txt and the properties that represent the BCM2835 controller.
+
+Required properties:
+- compatible : Should be "brcm,bcm2835-sdhci".
+- clocks : The clock feeding the SDHCI controller.
+
+Example:
+
+sdhci: sdhci {
+	compatible = "brcm,bcm2835-sdhci";
+	reg = <0x7e300000 0x100>;
+	interrupts = <2 30>;
+	clocks = <&clk_mmc>;
+	bus-width = <4>;
+};

Documentation/devicetree/bindings/mmc/mmc.txt

@@ -6,23 +6,45 @@ Interpreted by the OF core:
 - reg: Registers location and length.
 - interrupts: Interrupts used by the MMC controller.
 
-Required properties:
-- bus-width: Number of data lines, can be <1>, <4>, or <8>
-
 Card detection:
-If no property below is supplied, standard SDHCI card detect is used.
+If no property below is supplied, host native card detect is used.
 Only one of the properties in this section should be supplied:
   - broken-cd: There is no card detection available; polling must be used.
   - cd-gpios: Specify GPIOs for card detection, see gpio binding
   - non-removable: non-removable slot (like eMMC); assume always present.
 
 Optional properties:
+- bus-width: Number of data lines, can be <1>, <4>, or <8>.  The default
+  will be <1> if the property is absent.
 - wp-gpios: Specify GPIOs for write protection, see gpio binding
-- cd-inverted: when present, polarity on the cd gpio line is inverted
-- wp-inverted: when present, polarity on the wp gpio line is inverted
+- cd-inverted: when present, polarity on the CD line is inverted. See the note
+  below for the case, when a GPIO is used for the CD line
+- wp-inverted: when present, polarity on the WP line is inverted. See the note
+  below for the case, when a GPIO is used for the WP line
 - max-frequency: maximum operating clock frequency
 - no-1-8-v: when present, denotes that 1.8v card voltage is not supported on
   this system, even if the controller claims it is.
+- cap-sd-highspeed: SD high-speed timing is supported
+- cap-mmc-highspeed: MMC high-speed timing is supported
+- cap-power-off-card: powering off the card is safe
+- cap-sdio-irq: enable SDIO IRQ signalling on this interface
+
+*NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
+polarity properties, we have to fix the meaning of the "normal" and "inverted"
+line levels. We choose to follow the SDHCI standard, which specifies both those
+lines as "active low." Therefore, using the "cd-inverted" property means, that
+the CD line is active high, i.e. it is high, when a card is inserted. Similar
+logic applies to the "wp-inverted" property.
+
+CD and WP lines can be implemented on the hardware in one of two ways: as GPIOs,
+specified in cd-gpios and wp-gpios properties, or as dedicated pins. Polarity of
+dedicated pins can be specified, using *-inverted properties. GPIO polarity can
+also be specified using the OF_GPIO_ACTIVE_LOW flag. This creates an ambiguity
+in the latter case. We choose to use the XOR logic for GPIO CD and WP lines.
+This means, the two properties are "superimposed," for example leaving the
+OF_GPIO_ACTIVE_LOW flag clear and specifying the respective *-inverted
+property results in a double-inversion and actually means the "normal" line
+polarity is in effect.
 
 Optional SDIO properties:
 - keep-power-in-suspend: Preserves card power during a suspend/resume cycle

Documentation/devicetree/bindings/mmc/orion-sdio.txt

+* Marvell orion-sdio controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the orion-sdio driver.
+
+- compatible: Should be "marvell,orion-sdio"
+- clocks: reference to the clock of the SDIO interface
+
+Example:
+
+	mvsdio@d00d4000 {
+		compatible = "marvell,orion-sdio";
+		reg = <0xd00d4000 0x200>;
+		interrupts = <54>;
+		clocks = <&gateclk 17>;
+		status = "disabled";
+	};

Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt

@@ -26,8 +26,16 @@ Required Properties:
 	* bus-width: as documented in mmc core bindings.
 
 	* wp-gpios: specifies the write protect gpio line. The format of the
-	  gpio specifier depends on the gpio controller. If the write-protect
-	  line is not available, this property is optional.
+	  gpio specifier depends on the gpio controller. If a GPIO is not used
+	  for write-protect, this property is optional.
+
+	* disable-wp: If the wp-gpios property isn't present then (by default)
+	  we'd assume that the write protect is hooked up directly to the
+	  controller's special purpose write protect line (accessible via
+	  the WRTPRT register).  However, it's possible that we simply don't
+	  want write protect.  In that case specify 'disable-wp'.
+	  NOTE: This property is not required for slots known to always
+	  connect to eMMC or SDIO cards.
 
 Optional properties:
 

Documentation/devicetree/bindings/mmc/tmio_mmc.txt

+* Toshiba Mobile IO SD/MMC controller
+
+The tmio-mmc driver doesn't probe its devices actively, instead its binding to
+devices is managed by either MFD drivers or by the sh_mobile_sdhi platform
+driver. Those drivers supply the tmio-mmc driver with platform data, that either
+describe hardware capabilities, known to them, or are obtained by them from
+their own platform data or from their DT information. In the latter case all
+compulsory and any optional properties, common to all SD/MMC drivers, as
+described in mmc.txt, can be used. Additionally the following tmio_mmc-specific
+optional bindings can be used.
+
+Optional properties:
+- toshiba,mmc-wrprotect-disable: write-protect detection is unavailable
+
+When used with Renesas SDHI hardware, the following compatibility strings
+configure various model-specific properties:
+
+"renesas,sh7372-sdhi":	(default) compatible with SH7372
+"renesas,r8a7740-sdhi":	compatible with R8A7740: certain MMC/SD commands have to
+			wait for the interface to become idle.

MAINTAINERS

@@ -5692,7 +5692,7 @@ S:	Maintained
 F:	drivers/mmc/host/omap.c
 
 OMAP HS MMC SUPPORT
-M:	Venkatraman S <svenkatr@ti.com>
+M:	Balaji T K <balajitk@ti.com>
 L:	linux-mmc@vger.kernel.org
 L:	linux-omap@vger.kernel.org
 S:	Maintained
@@ -6804,6 +6804,14 @@ F:	include/linux/dw_dmac.h
 F:	drivers/dma/dw_dmac_regs.h
 F:	drivers/dma/dw_dmac.c
 
+SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER
+M:	Seungwon Jeon <tgih.jun@samsung.com>
+M:	Jaehoon Chung <jh80.chung@samsung.com>
+L:	linux-mmc@vger.kernel.org
+S:	Maintained
+F:	include/linux/mmc/dw_mmc.h
+F:	drivers/mmc/host/dw_mmc*
+
 TIMEKEEPING, NTP
 M:	John Stultz <john.stultz@linaro.org>
 M:	Thomas Gleixner <tglx@linutronix.de>

arch/arm/boot/dts/exynos5250-smdk5250.dts

@@ -151,6 +151,7 @@ slot@0 {
 			reg = <0>;
 			bus-width = <4>;
 			samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
+			disable-wp;
 			gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
 				<&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
 				<&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>,

drivers/mmc/card/block.c

@@ -59,6 +59,12 @@ MODULE_ALIAS("mmc:block");
 #define INAND_CMD38_ARG_SECTRIM2 0x88
 #define MMC_BLK_TIMEOUT_MS  (10 * 60 * 1000)        /* 10 minute timeout */
 
+#define mmc_req_rel_wr(req)	(((req->cmd_flags & REQ_FUA) || \
+				  (req->cmd_flags & REQ_META)) && \
+				  (rq_data_dir(req) == WRITE))
+#define PACKED_CMD_VER	0x01
+#define PACKED_CMD_WR	0x02
+
 static DEFINE_MUTEX(block_mutex);
 
 /*
@@ -89,6 +95,7 @@ struct mmc_blk_data {
 	unsigned int	flags;
 #define MMC_BLK_CMD23	(1 << 0)	/* Can do SET_BLOCK_COUNT for multiblock */
 #define MMC_BLK_REL_WR	(1 << 1)	/* MMC Reliable write support */
+#define MMC_BLK_PACKED_CMD	(1 << 2)	/* MMC packed command support */
 
 	unsigned int	usage;
 	unsigned int	read_only;
@@ -113,15 +120,10 @@ struct mmc_blk_data {
 
 static DEFINE_MUTEX(open_lock);
 
-enum mmc_blk_status {
-	MMC_BLK_SUCCESS = 0,
-	MMC_BLK_PARTIAL,
-	MMC_BLK_CMD_ERR,
-	MMC_BLK_RETRY,
-	MMC_BLK_ABORT,
-	MMC_BLK_DATA_ERR,
-	MMC_BLK_ECC_ERR,
-	MMC_BLK_NOMEDIUM,
+enum {
+	MMC_PACKED_NR_IDX = -1,
+	MMC_PACKED_NR_ZERO,
+	MMC_PACKED_NR_SINGLE,
 };
 
 module_param(perdev_minors, int, 0444);
@@ -131,6 +133,19 @@ static inline int mmc_blk_part_switch(struct mmc_card *card,
 				      struct mmc_blk_data *md);
 static int get_card_status(struct mmc_card *card, u32 *status, int retries);
 
+static inline void mmc_blk_clear_packed(struct mmc_queue_req *mqrq)
+{
+	struct mmc_packed *packed = mqrq->packed;
+
+	BUG_ON(!packed);
+
+	mqrq->cmd_type = MMC_PACKED_NONE;
+	packed->nr_entries = MMC_PACKED_NR_ZERO;
+	packed->idx_failure = MMC_PACKED_NR_IDX;
+	packed->retries = 0;
+	packed->blocks = 0;
+}
+
 static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk)
 {
 	struct mmc_blk_data *md;
@@ -1148,12 +1163,78 @@ static int mmc_blk_err_check(struct mmc_card *card,
 	if (!brq->data.bytes_xfered)
 		return MMC_BLK_RETRY;
 
+	if (mmc_packed_cmd(mq_mrq->cmd_type)) {
+		if (unlikely(brq->data.blocks << 9 != brq->data.bytes_xfered))
+			return MMC_BLK_PARTIAL;
+		else
+			return MMC_BLK_SUCCESS;
+	}
+
 	if (blk_rq_bytes(req) != brq->data.bytes_xfered)
 		return MMC_BLK_PARTIAL;
 
 	return MMC_BLK_SUCCESS;
 }
 
+static int mmc_blk_packed_err_check(struct mmc_card *card,
+				    struct mmc_async_req *areq)
+{
+	struct mmc_queue_req *mq_rq = container_of(areq, struct mmc_queue_req,
+			mmc_active);
+	struct request *req = mq_rq->req;
+	struct mmc_packed *packed = mq_rq->packed;
+	int err, check, status;
+	u8 *ext_csd;
+
+	BUG_ON(!packed);
+
+	packed->retries--;
+	check = mmc_blk_err_check(card, areq);
+	err = get_card_status(card, &status, 0);
+	if (err) {
+		pr_err("%s: error %d sending status command\n",
+		       req->rq_disk->disk_name, err);
+		return MMC_BLK_ABORT;
+	}
+
+	if (status & R1_EXCEPTION_EVENT) {
+		ext_csd = kzalloc(512, GFP_KERNEL);
+		if (!ext_csd) {
+			pr_err("%s: unable to allocate buffer for ext_csd\n",
+			       req->rq_disk->disk_name);
+			return -ENOMEM;
+		}
+
+		err = mmc_send_ext_csd(card, ext_csd);
+		if (err) {
+			pr_err("%s: error %d sending ext_csd\n",
+			       req->rq_disk->disk_name, err);
+			check = MMC_BLK_ABORT;
+			goto free;
+		}
+
+		if ((ext_csd[EXT_CSD_EXP_EVENTS_STATUS] &
+		     EXT_CSD_PACKED_FAILURE) &&
+		    (ext_csd[EXT_CSD_PACKED_CMD_STATUS] &
+		     EXT_CSD_PACKED_GENERIC_ERROR)) {
+			if (ext_csd[EXT_CSD_PACKED_CMD_STATUS] &
+			    EXT_CSD_PACKED_INDEXED_ERROR) {
+				packed->idx_failure =
+				  ext_csd[EXT_CSD_PACKED_FAILURE_INDEX] - 1;
+				check = MMC_BLK_PARTIAL;
+			}
+			pr_err("%s: packed cmd failed, nr %u, sectors %u, "
+			       "failure index: %d\n",
+			       req->rq_disk->disk_name, packed->nr_entries,
+			       packed->blocks, packed->idx_failure);
+		}
+free:
+		kfree(ext_csd);
+	}
+
+	return check;
+}
+
 static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 			       struct mmc_card *card,
 			       int disable_multi,
@@ -1308,10 +1389,221 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 	mmc_queue_bounce_pre(mqrq);
 }
 
+static inline u8 mmc_calc_packed_hdr_segs(struct request_queue *q,
+					  struct mmc_card *card)
+{
+	unsigned int hdr_sz = mmc_large_sector(card) ? 4096 : 512;
+	unsigned int max_seg_sz = queue_max_segment_size(q);
+	unsigned int len, nr_segs = 0;
+
+	do {
+		len = min(hdr_sz, max_seg_sz);
+		hdr_sz -= len;
+		nr_segs++;
+	} while (hdr_sz);
+
+	return nr_segs;
+}
+
+static u8 mmc_blk_prep_packed_list(struct mmc_queue *mq, struct request *req)
+{
+	struct request_queue *q = mq->queue;
+	struct mmc_card *card = mq->card;
+	struct request *cur = req, *next = NULL;
+	struct mmc_blk_data *md = mq->data;
+	struct mmc_queue_req *mqrq = mq->mqrq_cur;
+	bool en_rel_wr = card->ext_csd.rel_param & EXT_CSD_WR_REL_PARAM_EN;
+	unsigned int req_sectors = 0, phys_segments = 0;
+	unsigned int max_blk_count, max_phys_segs;
+	bool put_back = true;
+	u8 max_packed_rw = 0;
+	u8 reqs = 0;
+
+	if (!(md->flags & MMC_BLK_PACKED_CMD))
+		goto no_packed;
+
+	if ((rq_data_dir(cur) == WRITE) &&
+	    mmc_host_packed_wr(card->host))
+		max_packed_rw = card->ext_csd.max_packed_writes;
+
+	if (max_packed_rw == 0)
+		goto no_packed;
+
+	if (mmc_req_rel_wr(cur) &&
+	    (md->flags & MMC_BLK_REL_WR) && !en_rel_wr)
+		goto no_packed;
+
+	if (mmc_large_sector(card) &&
+	    !IS_ALIGNED(blk_rq_sectors(cur), 8))
+		goto no_packed;
+
+	mmc_blk_clear_packed(mqrq);
+
+	max_blk_count = min(card->host->max_blk_count,
+			    card->host->max_req_size >> 9);
+	if (unlikely(max_blk_count > 0xffff))
+		max_blk_count = 0xffff;
+
+	max_phys_segs = queue_max_segments(q);
+	req_sectors += blk_rq_sectors(cur);
+	phys_segments += cur->nr_phys_segments;
+
+	if (rq_data_dir(cur) == WRITE) {
+		req_sectors += mmc_large_sector(card) ? 8 : 1;
+		phys_segments += mmc_calc_packed_hdr_segs(q, card);
+	}
+
+	do {
+		if (reqs >= max_packed_rw - 1) {
+			put_back = false;
+			break;
+		}
+
+		spin_lock_irq(q->queue_lock);
+		next = blk_fetch_request(q);
+		spin_unlock_irq(q->queue_lock);
+		if (!next) {
+			put_back = false;
+			break;
+		}
+
+		if (mmc_large_sector(card) &&
+		    !IS_ALIGNED(blk_rq_sectors(next), 8))
+			break;
+
+		if (next->cmd_flags & REQ_DISCARD ||
+		    next->cmd_flags & REQ_FLUSH)
+			break;
+
+		if (rq_data_dir(cur) != rq_data_dir(next))
+			break;
+
+		if (mmc_req_rel_wr(next) &&
+		    (md->flags & MMC_BLK_REL_WR) && !en_rel_wr)
+			break;
+
+		req_sectors += blk_rq_sectors(next);
+		if (req_sectors > max_blk_count)
+			break;
+
+		phys_segments +=  next->nr_phys_segments;
+		if (phys_segments > max_phys_segs)
+			break;
+
+		list_add_tail(&next->queuelist, &mqrq->packed->list);
+		cur = next;
+		reqs++;
+	} while (1);
+
+	if (put_back) {
+		spin_lock_irq(q->queue_lock);
+		blk_requeue_request(q, next);
+		spin_unlock_irq(q->queue_lock);
+	}
+
+	if (reqs > 0) {
+		list_add(&req->queuelist, &mqrq->packed->list);
+		mqrq->packed->nr_entries = ++reqs;
+		mqrq->packed->retries = reqs;
+		return reqs;
+	}
+
+no_packed:
+	mqrq->cmd_type = MMC_PACKED_NONE;
+	return 0;
+}
+
+static void mmc_blk_packed_hdr_wrq_prep(struct mmc_queue_req *mqrq,
+					struct mmc_card *card,
+					struct mmc_queue *mq)
+{
+	struct mmc_blk_request *brq = &mqrq->brq;
+	struct request *req = mqrq->req;
+	struct request *prq;
+	struct mmc_blk_data *md = mq->data;
+	struct mmc_packed *packed = mqrq->packed;
+	bool do_rel_wr, do_data_tag;
+	u32 *packed_cmd_hdr;
+	u8 hdr_blocks;
+	u8 i = 1;
+
+	BUG_ON(!packed);
+
+	mqrq->cmd_type = MMC_PACKED_WRITE;
+	packed->blocks = 0;
+	packed->idx_failure = MMC_PACKED_NR_IDX;
+
+	packed_cmd_hdr = packed->cmd_hdr;
+	memset(packed_cmd_hdr, 0, sizeof(packed->cmd_hdr));
+	packed_cmd_hdr[0] = (packed->nr_entries << 16) |
+		(PACKED_CMD_WR << 8) | PACKED_CMD_VER;
+	hdr_blocks = mmc_large_sector(card) ? 8 : 1;
+
+	/*
+	 * Argument for each entry of packed group
+	 */
+	list_for_each_entry(prq, &packed->list, queuelist) {
+		do_rel_wr = mmc_req_rel_wr(prq) && (md->flags & MMC_BLK_REL_WR);
+		do_data_tag = (card->ext_csd.data_tag_unit_size) &&
+			(prq->cmd_flags & REQ_META) &&
+			(rq_data_dir(prq) == WRITE) &&
+			((brq->data.blocks * brq->data.blksz) >=
+			 card->ext_csd.data_tag_unit_size);
+		/* Argument of CMD23 */
+		packed_cmd_hdr[(i * 2)] =
+			(do_rel_wr ? MMC_CMD23_ARG_REL_WR : 0) |
+			(do_data_tag ? MMC_CMD23_ARG_TAG_REQ : 0) |
+			blk_rq_sectors(prq);
+		/* Argument of CMD18 or CMD25 */
+		packed_cmd_hdr[((i * 2)) + 1] =
+			mmc_card_blockaddr(card) ?
+			blk_rq_pos(prq) : blk_rq_pos(prq) << 9;
+		packed->blocks += blk_rq_sectors(prq);
+		i++;
+	}
+
+	memset(brq, 0, sizeof(struct mmc_blk_request));
+	brq->mrq.cmd = &brq->cmd;
+	brq->mrq.data = &brq->data;
+	brq->mrq.sbc = &brq->sbc;
+	brq->mrq.stop = &brq->stop;
+
+	brq->sbc.opcode = MMC_SET_BLOCK_COUNT;
+	brq->sbc.arg = MMC_CMD23_ARG_PACKED | (packed->blocks + hdr_blocks);
+	brq->sbc.flags = MMC_RSP_R1 | MMC_CMD_AC;
+
+	brq->cmd.opcode = MMC_WRITE_MULTIPLE_BLOCK;
+	brq->cmd.arg = blk_rq_pos(req);
+	if (!mmc_card_blockaddr(card))
+		brq->cmd.arg <<= 9;
+	brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
+
+	brq->data.blksz = 512;
+	brq->data.blocks = packed->blocks + hdr_blocks;
+	brq->data.flags |= MMC_DATA_WRITE;
+
+	brq->stop.opcode = MMC_STOP_TRANSMISSION;
+	brq->stop.arg = 0;
+	brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
+
+	mmc_set_data_timeout(&brq->data, card);
+
+	brq->data.sg = mqrq->sg;
+	brq->data.sg_len = mmc_queue_map_sg(mq, mqrq);
+
+	mqrq->mmc_active.mrq = &brq->mrq;
+	mqrq->mmc_active.err_check = mmc_blk_packed_err_check;
+
+	mmc_queue_bounce_pre(mqrq);
+}
+
 static int mmc_blk_cmd_err(struct mmc_blk_data *md, struct mmc_card *card,
 			   struct mmc_blk_request *brq, struct request *req,
 			   int ret)
 {
+	struct mmc_queue_req *mq_rq;
+	mq_rq = container_of(brq, struct mmc_queue_req, brq);
+
 	/*
 	 * If this is an SD card and we're writing, we can first
 	 * mark the known good sectors as ok.
@@ -1328,11 +1620,84 @@ static int mmc_blk_cmd_err(struct mmc_blk_data *md, struct mmc_card *card,
 			ret = blk_end_request(req, 0, blocks << 9);
 		}
 	} else {
+		if (!mmc_packed_cmd(mq_rq->cmd_type))
 			ret = blk_end_request(req, 0, brq->data.bytes_xfered);
 	}
 	return ret;
 }
 
+static int mmc_blk_end_packed_req(struct mmc_queue_req *mq_rq)
+{
+	struct request *prq;
+	struct mmc_packed *packed = mq_rq->packed;
+	int idx = packed->idx_failure, i = 0;
+	int ret = 0;
+
+	BUG_ON(!packed);
+
+	while (!list_empty(&packed->list)) {
+		prq = list_entry_rq(packed->list.next);
+		if (idx == i) {
+			/* retry from error index */
+			packed->nr_entries -= idx;
+			mq_rq->req = prq;
+			ret = 1;
+
+			if (packed->nr_entries == MMC_PACKED_NR_SINGLE) {
+				list_del_init(&prq->queuelist);
+				mmc_blk_clear_packed(mq_rq);
+			}
+			return ret;
+		}
+		list_del_init(&prq->queuelist);
+		blk_end_request(prq, 0, blk_rq_bytes(prq));
+		i++;
+	}
+
+	mmc_blk_clear_packed(mq_rq);
+	return ret;
+}
+
+static void mmc_blk_abort_packed_req(struct mmc_queue_req *mq_rq)
+{
+	struct request *prq;
+	struct mmc_packed *packed = mq_rq->packed;
+
+	BUG_ON(!packed);
+
+	while (!list_empty(&packed->list)) {
+		prq = list_entry_rq(packed->list.next);
+		list_del_init(&prq->queuelist);
+		blk_end_request(prq, -EIO, blk_rq_bytes(prq));
+	}
+
+	mmc_blk_clear_packed(mq_rq);
+}
+
+static void mmc_blk_revert_packed_req(struct mmc_queue *mq,
+				      struct mmc_queue_req *mq_rq)
+{
+	struct request *prq;
+	struct request_queue *q = mq->queue;
+	struct mmc_packed *packed = mq_rq->packed;
+
+	BUG_ON(!packed);
+
+	while (!list_empty(&packed->list)) {
+		prq = list_entry_rq(packed->list.prev);
+		if (prq->queuelist.prev != &packed->list) {
+			list_del_init(&prq->queuelist);
+			spin_lock_irq(q->queue_lock);
+			blk_requeue_request(mq->queue, prq);
+			spin_unlock_irq(q->queue_lock);
+		} else {
+			list_del_init(&prq->queuelist);
+		}
+	}
+
+	mmc_blk_clear_packed(mq_rq);
+}
+
 static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
 {
 	struct mmc_blk_data *md = mq->data;
@@ -1343,10 +1708,15 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
 	struct mmc_queue_req *mq_rq;
 	struct request *req = rqc;
 	struct mmc_async_req *areq;
+	const u8 packed_nr = 2;
+	u8 reqs = 0;
 
 	if (!rqc && !mq->mqrq_prev->req)
 		return 0;
 
+	if (rqc)
+		reqs = mmc_blk_prep_packed_list(mq, rqc);
+
 	do {
 		if (rqc) {
 			/*
@@ -1357,15 +1727,24 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
 			    (card->ext_csd.data_sector_size == 4096)) {
 				pr_err("%s: Transfer size is not 4KB sector size aligned\n",
 					req->rq_disk->disk_name);
+				mq_rq = mq->mqrq_cur;
 				goto cmd_abort;
 			}
+
+			if (reqs >= packed_nr)
+				mmc_blk_packed_hdr_wrq_prep(mq->mqrq_cur,
+							    card, mq);
+			else
 				mmc_blk_rw_rq_prep(mq->mqrq_cur, card, 0, mq);
 			areq = &mq->mqrq_cur->mmc_active;
 		} else
 			areq = NULL;
 		areq = mmc_start_req(card->host, areq, (int *) &status);
-		if (!areq)
+		if (!areq) {
+			if (status == MMC_BLK_NEW_REQUEST)
+				mq->flags |= MMC_QUEUE_NEW_REQUEST;
 			return 0;
+		}
 
 		mq_rq = container_of(areq, struct mmc_queue_req, mmc_active);
 		brq = &mq_rq->brq;
@@ -1380,8 +1759,15 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
 			 * A block was successfully transferred.
 			 */
 			mmc_blk_reset_success(md, type);
+
+			if (mmc_packed_cmd(mq_rq->cmd_type)) {
+				ret = mmc_blk_end_packed_req(mq_rq);
+				break;
+			} else {
 				ret = blk_end_request(req, 0,
 						brq->data.bytes_xfered);
+			}
+
 			/*
 			 * If the blk_end_request function returns non-zero even
 			 * though all data has been transferred and no errors
@@ -1414,7 +1800,8 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
 			err = mmc_blk_reset(md, card->host, type);
 			if (!err)
 				break;
-			if (err == -ENODEV)
+			if (err == -ENODEV ||
+				mmc_packed_cmd(mq_rq->cmd_type))
 				goto cmd_abort;
 			/* Fall through */
 		}
@@ -1438,30 +1825,62 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
 			break;
 		case MMC_BLK_NOMEDIUM:
 			goto cmd_abort;
+		default:
+			pr_err("%s: Unhandled return value (%d)",
+					req->rq_disk->disk_name, status);
+			goto cmd_abort;
 		}
 
 		if (ret) {
+			if (mmc_packed_cmd(mq_rq->cmd_type)) {
+				if (!mq_rq->packed->retries)
+					goto cmd_abort;
+				mmc_blk_packed_hdr_wrq_prep(mq_rq, card, mq);
+				mmc_start_req(card->host,
+					      &mq_rq->mmc_active, NULL);
+			} else {
+
 				/*
 				 * In case of a incomplete request
 				 * prepare it again and resend.
 				 */
-			mmc_blk_rw_rq_prep(mq_rq, card, disable_multi, mq);
-			mmc_start_req(card->host, &mq_rq->mmc_active, NULL);
+				mmc_blk_rw_rq_prep(mq_rq, card,
+						disable_multi, mq);
+				mmc_start_req(card->host,
+						&mq_rq->mmc_active, NULL);
+			}
 		}
 	} while (ret);
 
 	return 1;
 
  cmd_abort:
+	if (mmc_packed_cmd(mq_rq->cmd_type)) {
+		mmc_blk_abort_packed_req(mq_rq);
+	} else {
 		if (mmc_card_removed(card))
 			req->cmd_flags |= REQ_QUIET;
 		while (ret)
-		ret = blk_end_request(req, -EIO, blk_rq_cur_bytes(req));
+			ret = blk_end_request(req, -EIO,
+					blk_rq_cur_bytes(req));
+	}
 
  start_new_req:
 	if (rqc) {
+		if (mmc_card_removed(card)) {
+			rqc->cmd_flags |= REQ_QUIET;
+			blk_end_request_all(rqc, -EIO);
+		} else {
+			/*
+			 * If current request is packed, it needs to put back.
+			 */
+			if (mmc_packed_cmd(mq->mqrq_cur->cmd_type))
+				mmc_blk_revert_packed_req(mq, mq->mqrq_cur);
+
 			mmc_blk_rw_rq_prep(mq->mqrq_cur, card, 0, mq);
-		mmc_start_req(card->host, &mq->mqrq_cur->mmc_active, NULL);
+			mmc_start_req(card->host,
+				      &mq->mqrq_cur->mmc_active, NULL);
+		}
 	}
 
 	return 0;
@@ -1472,6 +1891,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 	int ret;
 	struct mmc_blk_data *md = mq->data;
 	struct mmc_card *card = md->queue.card;
+	struct mmc_host *host = card->host;
+	unsigned long flags;
 
 	if (req && !mq->mqrq_prev->req)
 		/* claim host only for the first request */
@@ -1486,6 +1907,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 		goto out;
 	}
 
+	mq->flags &= ~MMC_QUEUE_NEW_REQUEST;
 	if (req && req->cmd_flags & REQ_DISCARD) {
 		/* complete ongoing async transfer before issuing discard */
 		if (card->host->areq)
@@ -1501,11 +1923,16 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 			mmc_blk_issue_rw_rq(mq, NULL);
 		ret = mmc_blk_issue_flush(mq, req);
 	} else {
+		if (!req && host->areq) {
+			spin_lock_irqsave(&host->context_info.lock, flags);
+			host->context_info.is_waiting_last_req = true;
+			spin_unlock_irqrestore(&host->context_info.lock, flags);
+		}
 		ret = mmc_blk_issue_rw_rq(mq, req);
 	}
 
 out:
-	if (!req)
+	if (!req && !(mq->flags & MMC_QUEUE_NEW_REQUEST))
 		/* release host only when there are no more requests */
 		mmc_release_host(card->host);
 	return ret;
@@ -1624,6 +2051,14 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card,
 		blk_queue_flush(md->queue.queue, REQ_FLUSH | REQ_FUA);
 	}
 
+	if (mmc_card_mmc(card) &&
+	    (area_type == MMC_BLK_DATA_AREA_MAIN) &&
+	    (md->flags & MMC_BLK_CMD23) &&
+	    card->ext_csd.packed_event_en) {
+		if (!mmc_packed_init(&md->queue, card))
+			md->flags |= MMC_BLK_PACKED_CMD;
+	}
+
 	return md;
 
  err_putdisk:
@@ -1732,6 +2167,8 @@ static void mmc_blk_remove_req(struct mmc_blk_data *md)
 
 		/* Then flush out any already in there */
 		mmc_cleanup_queue(&md->queue);
+		if (md->flags & MMC_BLK_PACKED_CMD)
+			mmc_packed_clean(&md->queue);
 		mmc_blk_put(md);
 	}
 }

drivers/mmc/card/queue.c

@@ -22,7 +22,8 @@
 
 #define MMC_QUEUE_BOUNCESZ	65536
 
-#define MMC_QUEUE_SUSPENDED	(1 << 0)
+
+#define MMC_REQ_SPECIAL_MASK	(REQ_DISCARD | REQ_FLUSH)
 
 /*
  * Prepare a MMC request. This just filters out odd stuff.
@@ -58,6 +59,7 @@ static int mmc_queue_thread(void *d)
 	do {
 		struct request *req = NULL;
 		struct mmc_queue_req *tmp;
+		unsigned int cmd_flags = 0;
 
 		spin_lock_irq(q->queue_lock);
 		set_current_state(TASK_INTERRUPTIBLE);
@@ -67,12 +69,23 @@ static int mmc_queue_thread(void *d)
 
 		if (req || mq->mqrq_prev->req) {
 			set_current_state(TASK_RUNNING);
+			cmd_flags = req ? req->cmd_flags : 0;
 			mq->issue_fn(mq, req);
+			if (mq->flags & MMC_QUEUE_NEW_REQUEST) {
+				mq->flags &= ~MMC_QUEUE_NEW_REQUEST;
+				continue; /* fetch again */
+			}
 
 			/*
 			 * Current request becomes previous request
 			 * and vice versa.
+			 * In case of special requests, current request
+			 * has been finished. Do not assign it to previous
+			 * request.
 			 */
+			if (cmd_flags & MMC_REQ_SPECIAL_MASK)
+				mq->mqrq_cur->req = NULL;
+
 			mq->mqrq_prev->brq.mrq.data = NULL;
 			mq->mqrq_prev->req = NULL;
 			tmp = mq->mqrq_prev;
@@ -103,6 +116,8 @@ static void mmc_request_fn(struct request_queue *q)
 {
 	struct mmc_queue *mq = q->queuedata;
 	struct request *req;
+	unsigned long flags;
+	struct mmc_context_info *cntx;
 
 	if (!mq) {
 		while ((req = blk_fetch_request(q)) != NULL) {
@@ -112,7 +127,20 @@ static void mmc_request_fn(struct request_queue *q)
 		return;
 	}
 
-	if (!mq->mqrq_cur->req && !mq->mqrq_prev->req)
+	cntx = &mq->card->host->context_info;
+	if (!mq->mqrq_cur->req && mq->mqrq_prev->req) {
+		/*
+		 * New MMC request arrived when MMC thread may be
+		 * blocked on the previous request to be complete
+		 * with no current request fetched
+		 */
+		spin_lock_irqsave(&cntx->lock, flags);
+		if (cntx->is_waiting_last_req) {
+			cntx->is_new_req = true;
+			wake_up_interruptible(&cntx->wait);
+		}
+		spin_unlock_irqrestore(&cntx->lock, flags);
+	} else if (!mq->mqrq_cur->req && !mq->mqrq_prev->req)
 		wake_up_process(mq->thread);
 }
 
@@ -334,6 +362,49 @@ void mmc_cleanup_queue(struct mmc_queue *mq)
 }
 EXPORT_SYMBOL(mmc_cleanup_queue);
 
+int mmc_packed_init(struct mmc_queue *mq, struct mmc_card *card)
+{
+	struct mmc_queue_req *mqrq_cur = &mq->mqrq[0];
+	struct mmc_queue_req *mqrq_prev = &mq->mqrq[1];
+	int ret = 0;
+
+
+	mqrq_cur->packed = kzalloc(sizeof(struct mmc_packed), GFP_KERNEL);
+	if (!mqrq_cur->packed) {
+		pr_warn("%s: unable to allocate packed cmd for mqrq_cur\n",
+			mmc_card_name(card));
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	mqrq_prev->packed = kzalloc(sizeof(struct mmc_packed), GFP_KERNEL);
+	if (!mqrq_prev->packed) {
+		pr_warn("%s: unable to allocate packed cmd for mqrq_prev\n",
+			mmc_card_name(card));
+		kfree(mqrq_cur->packed);
+		mqrq_cur->packed = NULL;
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	INIT_LIST_HEAD(&mqrq_cur->packed->list);
+	INIT_LIST_HEAD(&mqrq_prev->packed->list);
+
+out:
+	return ret;
+}
+
+void mmc_packed_clean(struct mmc_queue *mq)
+{
+	struct mmc_queue_req *mqrq_cur = &mq->mqrq[0];
+	struct mmc_queue_req *mqrq_prev = &mq->mqrq[1];
+
+	kfree(mqrq_cur->packed);
+	mqrq_cur->packed = NULL;
+	kfree(mqrq_prev->packed);
+	mqrq_prev->packed = NULL;
+}
+
 /**
  * mmc_queue_suspend - suspend a MMC request queue
  * @mq: MMC queue to suspend
@@ -378,6 +449,41 @@ void mmc_queue_resume(struct mmc_queue *mq)
 	}
 }
 
+static unsigned int mmc_queue_packed_map_sg(struct mmc_queue *mq,
+					    struct mmc_packed *packed,
+					    struct scatterlist *sg,
+					    enum mmc_packed_type cmd_type)
+{
+	struct scatterlist *__sg = sg;
+	unsigned int sg_len = 0;
+	struct request *req;
+
+	if (mmc_packed_wr(cmd_type)) {
+		unsigned int hdr_sz = mmc_large_sector(mq->card) ? 4096 : 512;
+		unsigned int max_seg_sz = queue_max_segment_size(mq->queue);
+		unsigned int len, remain, offset = 0;
+		u8 *buf = (u8 *)packed->cmd_hdr;
+
+		remain = hdr_sz;
+		do {
+			len = min(remain, max_seg_sz);
+			sg_set_buf(__sg, buf + offset, len);
+			offset += len;
+			remain -= len;
+			(__sg++)->page_link &= ~0x02;
+			sg_len++;
+		} while (remain);
+	}
+
+	list_for_each_entry(req, &packed->list, queuelist) {
+		sg_len += blk_rq_map_sg(mq->queue, req, __sg);
+		__sg = sg + (sg_len - 1);
+		(__sg++)->page_link &= ~0x02;
+	}
+	sg_mark_end(sg + (sg_len - 1));
+	return sg_len;
+}
+
 /*
  * Prepare the sg list(s) to be handed of to the host driver
  */
@@ -386,13 +492,25 @@ unsigned int mmc_queue_map_sg(struct mmc_queue *mq, struct mmc_queue_req *mqrq)
 	unsigned int sg_len;
 	size_t buflen;
 	struct scatterlist *sg;
+	enum mmc_packed_type cmd_type;
 	int i;
 
-	if (!mqrq->bounce_buf)
+	cmd_type = mqrq->cmd_type;
+
+	if (!mqrq->bounce_buf) {
+		if (mmc_packed_cmd(cmd_type))
+			return mmc_queue_packed_map_sg(mq, mqrq->packed,
+						       mqrq->sg, cmd_type);
+		else
 			return blk_rq_map_sg(mq->queue, mqrq->req, mqrq->sg);
+	}
 
 	BUG_ON(!mqrq->bounce_sg);
 
+	if (mmc_packed_cmd(cmd_type))
+		sg_len = mmc_queue_packed_map_sg(mq, mqrq->packed,
+						 mqrq->bounce_sg, cmd_type);
+	else
 		sg_len = blk_rq_map_sg(mq->queue, mqrq->req, mqrq->bounce_sg);
 
 	mqrq->bounce_sg_len = sg_len;

drivers/mmc/card/queue.h

@@ -12,6 +12,23 @@ struct mmc_blk_request {
 	struct mmc_data		data;
 };
 
+enum mmc_packed_type {
+	MMC_PACKED_NONE = 0,
+	MMC_PACKED_WRITE,
+};
+
+#define mmc_packed_cmd(type)	((type) != MMC_PACKED_NONE)
+#define mmc_packed_wr(type)	((type) == MMC_PACKED_WRITE)
+
+struct mmc_packed {
+	struct list_head	list;
+	u32			cmd_hdr[1024];
+	unsigned int		blocks;
+	u8			nr_entries;
+	u8			retries;
+	s16			idx_failure;
+};
+
 struct mmc_queue_req {
 	struct request		*req;
 	struct mmc_blk_request	brq;
@@ -20,6 +37,8 @@ struct mmc_queue_req {
 	struct scatterlist	*bounce_sg;
 	unsigned int		bounce_sg_len;
 	struct mmc_async_req	mmc_active;
+	enum mmc_packed_type	cmd_type;
+	struct mmc_packed	*packed;
 };
 
 struct mmc_queue {
@@ -27,6 +46,9 @@ struct mmc_queue {
 	struct task_struct	*thread;
 	struct semaphore	thread_sem;
 	unsigned int		flags;
+#define MMC_QUEUE_SUSPENDED	(1 << 0)
+#define MMC_QUEUE_NEW_REQUEST	(1 << 1)
+
 	int			(*issue_fn)(struct mmc_queue *, struct request *);
 	void			*data;
 	struct request_queue	*queue;
@@ -46,4 +68,7 @@ extern unsigned int mmc_queue_map_sg(struct mmc_queue *,
 extern void mmc_queue_bounce_pre(struct mmc_queue_req *);
 extern void mmc_queue_bounce_post(struct mmc_queue_req *);
 
+extern int mmc_packed_init(struct mmc_queue *, struct mmc_card *);
+extern void mmc_packed_clean(struct mmc_queue *);
+
 #endif

drivers/mmc/core/bus.c

@@ -321,6 +321,7 @@ int mmc_add_card(struct mmc_card *card)
 #ifdef CONFIG_DEBUG_FS
 	mmc_add_card_debugfs(card);
 #endif
+	mmc_init_context_info(card->host);
 
 	ret = device_add(&card->dev);
 	if (ret)

drivers/mmc/core/core.c

@@ -319,11 +319,45 @@ void mmc_start_bkops(struct mmc_card *card, bool from_exception)
 }
 EXPORT_SYMBOL(mmc_start_bkops);
 
+/*
+ * mmc_wait_data_done() - done callback for data request
+ * @mrq: done data request
+ *
+ * Wakes up mmc context, passed as a callback to host controller driver
+ */
+static void mmc_wait_data_done(struct mmc_request *mrq)
+{
+	mrq->host->context_info.is_done_rcv = true;
+	wake_up_interruptible(&mrq->host->context_info.wait);
+}
+
 static void mmc_wait_done(struct mmc_request *mrq)
 {
 	complete(&mrq->completion);
 }
 
+/*
+ *__mmc_start_data_req() - starts data request
+ * @host: MMC host to start the request
+ * @mrq: data request to start
+ *
+ * Sets the done callback to be called when request is completed by the card.
+ * Starts data mmc request execution
+ */
+static int __mmc_start_data_req(struct mmc_host *host, struct mmc_request *mrq)
+{
+	mrq->done = mmc_wait_data_done;
+	mrq->host = host;
+	if (mmc_card_removed(host->card)) {
+		mrq->cmd->error = -ENOMEDIUM;
+		mmc_wait_data_done(mrq);
+		return -ENOMEDIUM;
+	}
+	mmc_start_request(host, mrq);
+
+	return 0;
+}
+
 static int __mmc_start_req(struct mmc_host *host, struct mmc_request *mrq)
 {
 	init_completion(&mrq->completion);
@@ -337,6 +371,62 @@ static int __mmc_start_req(struct mmc_host *host, struct mmc_request *mrq)
 	return 0;
 }
 
+/*
+ * mmc_wait_for_data_req_done() - wait for request completed
+ * @host: MMC host to prepare the command.
+ * @mrq: MMC request to wait for
+ *
+ * Blocks MMC context till host controller will ack end of data request
+ * execution or new request notification arrives from the block layer.
+ * Handles command retries.
+ *
+ * Returns enum mmc_blk_status after checking errors.
+ */
+static int mmc_wait_for_data_req_done(struct mmc_host *host,
+				      struct mmc_request *mrq,
+				      struct mmc_async_req *next_req)
+{
+	struct mmc_command *cmd;
+	struct mmc_context_info *context_info = &host->context_info;
+	int err;
+	unsigned long flags;
+
+	while (1) {
+		wait_event_interruptible(context_info->wait,
+				(context_info->is_done_rcv ||
+				 context_info->is_new_req));
+		spin_lock_irqsave(&context_info->lock, flags);
+		context_info->is_waiting_last_req = false;
+		spin_unlock_irqrestore(&context_info->lock, flags);
+		if (context_info->is_done_rcv) {
+			context_info->is_done_rcv = false;
+			context_info->is_new_req = false;
+			cmd = mrq->cmd;
+			if (!cmd->error || !cmd->retries ||
+			    mmc_card_removed(host->card)) {
+				err = host->areq->err_check(host->card,
+							    host->areq);
+				break; /* return err */
+			} else {
+				pr_info("%s: req failed (CMD%u): %d, retrying...\n",
+					mmc_hostname(host),
+					cmd->opcode, cmd->error);
+				cmd->retries--;
+				cmd->error = 0;
+				host->ops->request(host, mrq);
+				continue; /* wait for done/new event again */
+			}
+		} else if (context_info->is_new_req) {
+			context_info->is_new_req = false;
+			if (!next_req) {
+				err = MMC_BLK_NEW_REQUEST;
+				break; /* return err */
+			}
+		}
+	}
+	return err;
+}
+
 static void mmc_wait_for_req_done(struct mmc_host *host,
 				  struct mmc_request *mrq)
 {
@@ -426,8 +516,16 @@ struct mmc_async_req *mmc_start_req(struct mmc_host *host,
 		mmc_pre_req(host, areq->mrq, !host->areq);
 
 	if (host->areq) {
-		mmc_wait_for_req_done(host, host->areq->mrq);
-		err = host->areq->err_check(host->card, host->areq);
+		err = mmc_wait_for_data_req_done(host, host->areq->mrq,	areq);
+		if (err == MMC_BLK_NEW_REQUEST) {
+			if (error)
+				*error = err;
+			/*
+			 * The previous request was not completed,
+			 * nothing to return
+			 */
+			return NULL;
+		}
 		/*
 		 * Check BKOPS urgency for each R1 response
 		 */
@@ -439,7 +537,7 @@ struct mmc_async_req *mmc_start_req(struct mmc_host *host,
 	}
 
 	if (!err && areq)
-		start_err = __mmc_start_req(host, areq->mrq);
+		start_err = __mmc_start_data_req(host, areq->mrq);
 
 	if (host->areq)
 		mmc_post_req(host, host->areq->mrq, 0);
@@ -1137,7 +1235,7 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc,
 		 */
 		voltage = regulator_get_voltage(supply);
 
-		if (regulator_count_voltages(supply) == 1)
+		if (!regulator_can_change_voltage(supply))
 			min_uV = max_uV = voltage;
 
 		if (voltage < 0)
@@ -1219,10 +1317,30 @@ u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
 	return ocr;
 }
 
-int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, bool cmd11)
+int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage)
+{
+	int err = 0;
+	int old_signal_voltage = host->ios.signal_voltage;
+
+	host->ios.signal_voltage = signal_voltage;
+	if (host->ops->start_signal_voltage_switch) {
+		mmc_host_clk_hold(host);
+		err = host->ops->start_signal_voltage_switch(host, &host->ios);
+		mmc_host_clk_release(host);
+	}
+
+	if (err)
+		host->ios.signal_voltage = old_signal_voltage;
+
+	return err;
+
+}
+
+int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage)
 {
 	struct mmc_command cmd = {0};
 	int err = 0;
+	u32 clock;
 
 	BUG_ON(!host);
 
@@ -1230,7 +1348,19 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, bool cmd11
 	 * Send CMD11 only if the request is to switch the card to
 	 * 1.8V signalling.
 	 */
-	if ((signal_voltage != MMC_SIGNAL_VOLTAGE_330) && cmd11) {
+	if (signal_voltage == MMC_SIGNAL_VOLTAGE_330)
+		return __mmc_set_signal_voltage(host, signal_voltage);
+
+	/*
+	 * If we cannot switch voltages, return failure so the caller
+	 * can continue without UHS mode
+	 */
+	if (!host->ops->start_signal_voltage_switch)
+		return -EPERM;
+	if (!host->ops->card_busy)
+		pr_warning("%s: cannot verify signal voltage switch\n",
+				mmc_hostname(host));
+
 	cmd.opcode = SD_SWITCH_VOLTAGE;
 	cmd.arg = 0;
 	cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
@@ -1241,16 +1371,58 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, bool cmd11
 
 	if (!mmc_host_is_spi(host) && (cmd.resp[0] & R1_ERROR))
 		return -EIO;
+
+	mmc_host_clk_hold(host);
+	/*
+	 * The card should drive cmd and dat[0:3] low immediately
+	 * after the response of cmd11, but wait 1 ms to be sure
+	 */
+	mmc_delay(1);
+	if (host->ops->card_busy && !host->ops->card_busy(host)) {
+		err = -EAGAIN;
+		goto power_cycle;
 	}
+	/*
+	 * During a signal voltage level switch, the clock must be gated
+	 * for 5 ms according to the SD spec
+	 */
+	clock = host->ios.clock;
+	host->ios.clock = 0;
+	mmc_set_ios(host);
 
-	host->ios.signal_voltage = signal_voltage;
+	if (__mmc_set_signal_voltage(host, signal_voltage)) {
+		/*
+		 * Voltages may not have been switched, but we've already
+		 * sent CMD11, so a power cycle is required anyway
+		 */
+		err = -EAGAIN;
+		goto power_cycle;
+	}
 
-	if (host->ops->start_signal_voltage_switch) {
-		mmc_host_clk_hold(host);
-		err = host->ops->start_signal_voltage_switch(host, &host->ios);
-		mmc_host_clk_release(host);
+	/* Keep clock gated for at least 5 ms */
+	mmc_delay(5);
+	host->ios.clock = clock;
+	mmc_set_ios(host);
+
+	/* Wait for at least 1 ms according to spec */
+	mmc_delay(1);
+
+	/*
+	 * Failure to switch is indicated by the card holding
+	 * dat[0:3] low
+	 */
+	if (host->ops->card_busy && host->ops->card_busy(host))
+		err = -EAGAIN;
+
+power_cycle:
+	if (err) {
+		pr_debug("%s: Signal voltage switch failed, "
+			"power cycling card\n", mmc_hostname(host));
+		mmc_power_cycle(host);
 	}
 
+	mmc_host_clk_release(host);
+
 	return err;
 }
 
@@ -1314,7 +1486,7 @@ static void mmc_power_up(struct mmc_host *host)
 	mmc_set_ios(host);
 
 	/* Set signal voltage to 3.3V */
-	mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, false);
+	__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330);
 
 	/*
 	 * This delay should be sufficient to allow the power supply
@@ -1372,6 +1544,14 @@ void mmc_power_off(struct mmc_host *host)
 	mmc_host_clk_release(host);
 }
 
+void mmc_power_cycle(struct mmc_host *host)
+{
+	mmc_power_off(host);
+	/* Wait at least 1 ms according to SD spec */
+	mmc_delay(1);
+	mmc_power_up(host);
+}
+
 /*
  * Cleanup when the last reference to the bus operator is dropped.
  */
@@ -2388,6 +2568,7 @@ EXPORT_SYMBOL(mmc_flush_cache);
  * Turn the cache ON/OFF.
  * Turning the cache OFF shall trigger flushing of the data
  * to the non-volatile storage.
+ * This function should be called with host claimed
  */
 int mmc_cache_ctrl(struct mmc_host *host, u8 enable)
 {
@@ -2399,7 +2580,6 @@ int mmc_cache_ctrl(struct mmc_host *host, u8 enable)
 			mmc_card_is_removable(host))
 		return err;
 
-	mmc_claim_host(host);
 	if (card && mmc_card_mmc(card) &&
 			(card->ext_csd.cache_size > 0)) {
 		enable = !!enable;
@@ -2417,7 +2597,6 @@ int mmc_cache_ctrl(struct mmc_host *host, u8 enable)
 				card->ext_csd.cache_ctrl = enable;
 		}
 	}
-	mmc_release_host(host);
 
 	return err;
 }
@@ -2436,10 +2615,6 @@ int mmc_suspend_host(struct mmc_host *host)
 	cancel_delayed_work(&host->detect);
 	mmc_flush_scheduled_work();
 
-	err = mmc_cache_ctrl(host, 0);
-	if (err)
-		goto out;
-
 	mmc_bus_get(host);
 	if (host->bus_ops && !host->bus_dead) {
 		if (host->bus_ops->suspend) {
@@ -2581,6 +2756,23 @@ int mmc_pm_notify(struct notifier_block *notify_block,
 }
 #endif
 
+/**
+ * mmc_init_context_info() - init synchronization context
+ * @host: mmc host
+ *
+ * Init struct context_info needed to implement asynchronous
+ * request mechanism, used by mmc core, host driver and mmc requests
+ * supplier.
+ */
+void mmc_init_context_info(struct mmc_host *host)
+{
+	spin_lock_init(&host->context_info.lock);
+	host->context_info.is_new_req = false;
+	host->context_info.is_done_rcv = false;
+	host->context_info.is_waiting_last_req = false;
+	init_waitqueue_head(&host->context_info.wait);
+}
+
 static int __init mmc_init(void)
 {
 	int ret;

drivers/mmc/core/core.h

@@ -40,11 +40,12 @@ void mmc_set_ungated(struct mmc_host *host);
 void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode);
 void mmc_set_bus_width(struct mmc_host *host, unsigned int width);
 u32 mmc_select_voltage(struct mmc_host *host, u32 ocr);
-int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage,
-			   bool cmd11);
+int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage);
+int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage);
 void mmc_set_timing(struct mmc_host *host, unsigned int timing);
 void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type);
 void mmc_power_off(struct mmc_host *host);
+void mmc_power_cycle(struct mmc_host *host);
 
 static inline void mmc_delay(unsigned int ms)
 {
@@ -76,5 +77,6 @@ void mmc_remove_host_debugfs(struct mmc_host *host);
 void mmc_add_card_debugfs(struct mmc_card *card);
 void mmc_remove_card_debugfs(struct mmc_card *card);
 
+void mmc_init_context_info(struct mmc_host *host);
 #endif
 

drivers/mmc/core/host.c

@@ -15,6 +15,8 @@
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/idr.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
 #include <linux/pagemap.h>
 #include <linux/export.h>
 #include <linux/leds.h>
@@ -23,6 +25,7 @@
 
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
+#include <linux/mmc/slot-gpio.h>
 
 #include "core.h"
 #include "host.h"
@@ -294,6 +297,126 @@ static inline void mmc_host_clk_sysfs_init(struct mmc_host *host)
 
 #endif
 
+/**
+ *	mmc_of_parse() - parse host's device-tree node
+ *	@host: host whose node should be parsed.
+ *
+ * To keep the rest of the MMC subsystem unaware of whether DT has been
+ * used to to instantiate and configure this host instance or not, we
+ * parse the properties and set respective generic mmc-host flags and
+ * parameters.
+ */
+void mmc_of_parse(struct mmc_host *host)
+{
+	struct device_node *np;
+	u32 bus_width;
+	bool explicit_inv_wp, gpio_inv_wp = false;
+	enum of_gpio_flags flags;
+	int len, ret, gpio;
+
+	if (!host->parent || !host->parent->of_node)
+		return;
+
+	np = host->parent->of_node;
+
+	/* "bus-width" is translated to MMC_CAP_*_BIT_DATA flags */
+	if (of_property_read_u32(np, "bus-width", &bus_width) < 0) {
+		dev_dbg(host->parent,
+			"\"bus-width\" property is missing, assuming 1 bit.\n");
+		bus_width = 1;
+	}
+
+	switch (bus_width) {
+	case 8:
+		host->caps |= MMC_CAP_8_BIT_DATA;
+		/* Hosts capable of 8-bit transfers can also do 4 bits */
+	case 4:
+		host->caps |= MMC_CAP_4_BIT_DATA;
+		break;
+	case 1:
+		break;
+	default:
+		dev_err(host->parent,
+			"Invalid \"bus-width\" value %ud!\n", bus_width);
+	}
+
+	/* f_max is obtained from the optional "max-frequency" property */
+	of_property_read_u32(np, "max-frequency", &host->f_max);
+
+	/*
+	 * Configure CD and WP pins. They are both by default active low to
+	 * match the SDHCI spec. If GPIOs are provided for CD and / or WP, the
+	 * mmc-gpio helpers are used to attach, configure and use them. If
+	 * polarity inversion is specified in DT, one of MMC_CAP2_CD_ACTIVE_HIGH
+	 * and MMC_CAP2_RO_ACTIVE_HIGH capability-2 flags is set. If the
+	 * "broken-cd" property is provided, the MMC_CAP_NEEDS_POLL capability
+	 * is set. If the "non-removable" property is found, the
+	 * MMC_CAP_NONREMOVABLE capability is set and no card-detection
+	 * configuration is performed.
+	 */
+
+	/* Parse Card Detection */
+	if (of_find_property(np, "non-removable", &len)) {
+		host->caps |= MMC_CAP_NONREMOVABLE;
+	} else {
+		bool explicit_inv_cd, gpio_inv_cd = false;
+
+		explicit_inv_cd = of_property_read_bool(np, "cd-inverted");
+
+		if (of_find_property(np, "broken-cd", &len))
+			host->caps |= MMC_CAP_NEEDS_POLL;
+
+		gpio = of_get_named_gpio_flags(np, "cd-gpios", 0, &flags);
+		if (gpio_is_valid(gpio)) {
+			if (!(flags & OF_GPIO_ACTIVE_LOW))
+				gpio_inv_cd = true;
+
+			ret = mmc_gpio_request_cd(host, gpio);
+			if (ret < 0)
+				dev_err(host->parent,
+					"Failed to request CD GPIO #%d: %d!\n",
+					gpio, ret);
+			else
+				dev_info(host->parent, "Got CD GPIO #%d.\n",
+					 gpio);
+		}
+
+		if (explicit_inv_cd ^ gpio_inv_cd)
+			host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
+	}
+
+	/* Parse Write Protection */
+	explicit_inv_wp = of_property_read_bool(np, "wp-inverted");
+
+	gpio = of_get_named_gpio_flags(np, "wp-gpios", 0, &flags);
+	if (gpio_is_valid(gpio)) {
+		if (!(flags & OF_GPIO_ACTIVE_LOW))
+			gpio_inv_wp = true;
+
+		ret = mmc_gpio_request_ro(host, gpio);
+		if (ret < 0)
+			dev_err(host->parent,
+				"Failed to request WP GPIO: %d!\n", ret);
+	}
+	if (explicit_inv_wp ^ gpio_inv_wp)
+		host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
+
+	if (of_find_property(np, "cap-sd-highspeed", &len))
+		host->caps |= MMC_CAP_SD_HIGHSPEED;
+	if (of_find_property(np, "cap-mmc-highspeed", &len))
+		host->caps |= MMC_CAP_MMC_HIGHSPEED;
+	if (of_find_property(np, "cap-power-off-card", &len))
+		host->caps |= MMC_CAP_POWER_OFF_CARD;
+	if (of_find_property(np, "cap-sdio-irq", &len))
+		host->caps |= MMC_CAP_SDIO_IRQ;
+	if (of_find_property(np, "keep-power-in-suspend", &len))
+		host->pm_caps |= MMC_PM_KEEP_POWER;
+	if (of_find_property(np, "enable-sdio-wakeup", &len))
+		host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
+}
+
+EXPORT_SYMBOL(mmc_of_parse);
+
 /**
  *	mmc_alloc_host - initialise the per-host structure.
  *	@extra: sizeof private data structure

drivers/mmc/core/mmc.c

@@ -496,7 +496,7 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
 		 * RPMB regions are defined in multiples of 128K.
 		 */
 		card->ext_csd.raw_rpmb_size_mult = ext_csd[EXT_CSD_RPMB_MULT];
-		if (ext_csd[EXT_CSD_RPMB_MULT]) {
+		if (ext_csd[EXT_CSD_RPMB_MULT] && mmc_host_cmd23(card->host)) {
 			mmc_part_add(card, ext_csd[EXT_CSD_RPMB_MULT] << 17,
 				EXT_CSD_PART_CONFIG_ACC_RPMB,
 				"rpmb", 0, false,
@@ -538,6 +538,11 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
 		} else {
 			card->ext_csd.data_tag_unit_size = 0;
 		}
+
+		card->ext_csd.max_packed_writes =
+			ext_csd[EXT_CSD_MAX_PACKED_WRITES];
+		card->ext_csd.max_packed_reads =
+			ext_csd[EXT_CSD_MAX_PACKED_READS];
 	} else {
 		card->ext_csd.data_sector_size = 512;
 	}
@@ -769,11 +774,11 @@ static int mmc_select_hs200(struct mmc_card *card)
 
 	if (card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_2V &&
 			host->caps2 & MMC_CAP2_HS200_1_2V_SDR)
-		err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120, 0);
+		err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
 
 	if (err && card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_8V &&
 			host->caps2 & MMC_CAP2_HS200_1_8V_SDR)
-		err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, 0);
+		err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
 
 	/* If fails try again during next card power cycle */
 	if (err)
@@ -1221,8 +1226,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 			 * WARNING: eMMC rules are NOT the same as SD DDR
 			 */
 			if (ddr == MMC_1_2V_DDR_MODE) {
-				err = mmc_set_signal_voltage(host,
-					MMC_SIGNAL_VOLTAGE_120, 0);
+				err = __mmc_set_signal_voltage(host,
+					MMC_SIGNAL_VOLTAGE_120);
 				if (err)
 					goto err;
 			}
@@ -1275,6 +1280,29 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 		}
 	}
 
+	/*
+	 * The mandatory minimum values are defined for packed command.
+	 * read: 5, write: 3
+	 */
+	if (card->ext_csd.max_packed_writes >= 3 &&
+	    card->ext_csd.max_packed_reads >= 5 &&
+	    host->caps2 & MMC_CAP2_PACKED_CMD) {
+		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+				EXT_CSD_EXP_EVENTS_CTRL,
+				EXT_CSD_PACKED_EVENT_EN,
+				card->ext_csd.generic_cmd6_time);
+		if (err && err != -EBADMSG)
+			goto free_card;
+		if (err) {
+			pr_warn("%s: Enabling packed event failed\n",
+				mmc_hostname(card->host));
+			card->ext_csd.packed_event_en = 0;
+			err = 0;
+		} else {
+			card->ext_csd.packed_event_en = 1;
+		}
+	}
+
 	if (!oldcard)
 		host->card = card;
 
@@ -1379,6 +1407,11 @@ static int mmc_suspend(struct mmc_host *host)
 	BUG_ON(!host->card);
 
 	mmc_claim_host(host);
+
+	err = mmc_cache_ctrl(host, 0);
+	if (err)
+		goto out;
+
 	if (mmc_can_poweroff_notify(host->card))
 		err = mmc_poweroff_notify(host->card, EXT_CSD_POWER_OFF_SHORT);
 	else if (mmc_card_can_sleep(host))
@@ -1386,8 +1419,9 @@ static int mmc_suspend(struct mmc_host *host)
 	else if (!mmc_host_is_spi(host))
 		err = mmc_deselect_cards(host);
 	host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
-	mmc_release_host(host);
 
+out:
+	mmc_release_host(host);
 	return err;
 }
 

drivers/mmc/core/mmc_ops.c

@@ -363,6 +363,7 @@ int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd)
 	return mmc_send_cxd_data(card, card->host, MMC_SEND_EXT_CSD,
 			ext_csd, 512);
 }
+EXPORT_SYMBOL_GPL(mmc_send_ext_csd);
 
 int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp)
 {

drivers/mmc/core/sd.c

@@ -444,8 +444,7 @@ static void sd_update_bus_speed_mode(struct mmc_card *card)
 	 * If the host doesn't support any of the UHS-I modes, fallback on
 	 * default speed.
 	 */
-	if (!(card->host->caps & (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 |
-	    MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_DDR50))) {
+	if (!mmc_host_uhs(card->host)) {
 		card->sd_bus_speed = 0;
 		return;
 	}
@@ -713,6 +712,14 @@ int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr)
 {
 	int err;
 	u32 max_current;
+	int retries = 10;
+
+try_again:
+	if (!retries) {
+		ocr &= ~SD_OCR_S18R;
+		pr_warning("%s: Skipping voltage switch\n",
+			mmc_hostname(host));
+	}
 
 	/*
 	 * Since we're changing the OCR value, we seem to
@@ -734,10 +741,10 @@ int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr)
 
 	/*
 	 * If the host supports one of UHS-I modes, request the card
-	 * to switch to 1.8V signaling level.
+	 * to switch to 1.8V signaling level. If the card has failed
+	 * repeatedly to switch however, skip this.
 	 */
-	if (host->caps & (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 |
-	    MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_DDR50))
+	if (retries && mmc_host_uhs(host))
 		ocr |= SD_OCR_S18R;
 
 	/*
@@ -748,7 +755,6 @@ int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr)
 	if (max_current > 150)
 		ocr |= SD_OCR_XPC;
 
-try_again:
 	err = mmc_send_app_op_cond(host, ocr, rocr);
 	if (err)
 		return err;
@@ -759,9 +765,12 @@ int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr)
 	 */
 	if (!mmc_host_is_spi(host) && rocr &&
 	   ((*rocr & 0x41000000) == 0x41000000)) {
-		err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, true);
-		if (err) {
-			ocr &= ~SD_OCR_S18R;
+		err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
+		if (err == -EAGAIN) {
+			retries--;
+			goto try_again;
+		} else if (err) {
+			retries = 0;
 			goto try_again;
 		}
 	}
@@ -960,16 +969,6 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
 
 		/* Card is an ultra-high-speed card */
 		mmc_card_set_uhs(card);
-
-		/*
-		 * Since initialization is now complete, enable preset
-		 * value registers for UHS-I cards.
-		 */
-		if (host->ops->enable_preset_value) {
-			mmc_host_clk_hold(card->host);
-			host->ops->enable_preset_value(host, true);
-			mmc_host_clk_release(card->host);
-		}
 	} else {
 		/*
 		 * Attempt to change to high-speed (if supported)
@@ -1148,13 +1147,6 @@ int mmc_attach_sd(struct mmc_host *host)
 	BUG_ON(!host);
 	WARN_ON(!host->claimed);
 
-	/* Disable preset value enable if already set since last time */
-	if (host->ops->enable_preset_value) {
-		mmc_host_clk_hold(host);
-		host->ops->enable_preset_value(host, false);
-		mmc_host_clk_release(host);
-	}
-
 	err = mmc_send_app_op_cond(host, 0, &ocr);
 	if (err)
 		return err;

drivers/mmc/core/sdio.c

@@ -157,10 +157,7 @@ static int sdio_read_cccr(struct mmc_card *card, u32 ocr)
 			if (ret)
 				goto out;
 
-			if (card->host->caps &
-				(MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 |
-				 MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 |
-				 MMC_CAP_UHS_DDR50)) {
+			if (mmc_host_uhs(card->host)) {
 				if (data & SDIO_UHS_DDR50)
 					card->sw_caps.sd3_bus_mode
 						|= SD_MODE_UHS_DDR50;
@@ -478,8 +475,7 @@ static int sdio_set_bus_speed_mode(struct mmc_card *card)
 	 * If the host doesn't support any of the UHS-I modes, fallback on
 	 * default speed.
 	 */
-	if (!(card->host->caps & (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 |
-	    MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_DDR50)))
+	if (!mmc_host_uhs(card->host))
 		return 0;
 
 	bus_speed = SDIO_SPEED_SDR12;
@@ -489,23 +485,27 @@ static int sdio_set_bus_speed_mode(struct mmc_card *card)
 			bus_speed = SDIO_SPEED_SDR104;
 			timing = MMC_TIMING_UHS_SDR104;
 			card->sw_caps.uhs_max_dtr = UHS_SDR104_MAX_DTR;
+			card->sd_bus_speed = UHS_SDR104_BUS_SPEED;
 	} else if ((card->host->caps & MMC_CAP_UHS_DDR50) &&
 		   (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_DDR50)) {
 			bus_speed = SDIO_SPEED_DDR50;
 			timing = MMC_TIMING_UHS_DDR50;
 			card->sw_caps.uhs_max_dtr = UHS_DDR50_MAX_DTR;
+			card->sd_bus_speed = UHS_DDR50_BUS_SPEED;
 	} else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
 		    MMC_CAP_UHS_SDR50)) && (card->sw_caps.sd3_bus_mode &
 		    SD_MODE_UHS_SDR50)) {
 			bus_speed = SDIO_SPEED_SDR50;
 			timing = MMC_TIMING_UHS_SDR50;
 			card->sw_caps.uhs_max_dtr = UHS_SDR50_MAX_DTR;
+			card->sd_bus_speed = UHS_SDR50_BUS_SPEED;
 	} else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
 		    MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25)) &&
 		   (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR25)) {
 			bus_speed = SDIO_SPEED_SDR25;
 			timing = MMC_TIMING_UHS_SDR25;
 			card->sw_caps.uhs_max_dtr = UHS_SDR25_MAX_DTR;
+			card->sd_bus_speed = UHS_SDR25_BUS_SPEED;
 	} else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
 		    MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25 |
 		    MMC_CAP_UHS_SDR12)) && (card->sw_caps.sd3_bus_mode &
@@ -513,6 +513,7 @@ static int sdio_set_bus_speed_mode(struct mmc_card *card)
 			bus_speed = SDIO_SPEED_SDR12;
 			timing = MMC_TIMING_UHS_SDR12;
 			card->sw_caps.uhs_max_dtr = UHS_SDR12_MAX_DTR;
+			card->sd_bus_speed = UHS_SDR12_BUS_SPEED;
 	}
 
 	err = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed);
@@ -583,10 +584,19 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 {
 	struct mmc_card *card;
 	int err;
+	int retries = 10;
 
 	BUG_ON(!host);
 	WARN_ON(!host->claimed);
 
+try_again:
+	if (!retries) {
+		pr_warning("%s: Skipping voltage switch\n",
+				mmc_hostname(host));
+		ocr &= ~R4_18V_PRESENT;
+		host->ocr &= ~R4_18V_PRESENT;
+	}
+
 	/*
 	 * Inform the card of the voltage
 	 */
@@ -645,14 +655,16 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 	 * systems that claim 1.8v signalling in fact do not support
 	 * it.
 	 */
-	if ((ocr & R4_18V_PRESENT) &&
-		(host->caps &
-			(MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 |
-			 MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 |
-			 MMC_CAP_UHS_DDR50))) {
-		err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180,
-				true);
-		if (err) {
+	if (!powered_resume && (ocr & R4_18V_PRESENT) && mmc_host_uhs(host)) {
+		err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
+		if (err == -EAGAIN) {
+			sdio_reset(host);
+			mmc_go_idle(host);
+			mmc_send_if_cond(host, host->ocr_avail);
+			mmc_remove_card(card);
+			retries--;
+			goto try_again;
+		} else if (err) {
 			ocr &= ~R4_18V_PRESENT;
 			host->ocr &= ~R4_18V_PRESENT;
 		}
@@ -937,10 +949,12 @@ static int mmc_sdio_resume(struct mmc_host *host)
 	mmc_claim_host(host);
 
 	/* No need to reinitialize powered-resumed nonremovable cards */
-	if (mmc_card_is_removable(host) || !mmc_card_keep_power(host))
+	if (mmc_card_is_removable(host) || !mmc_card_keep_power(host)) {
+		sdio_reset(host);
+		mmc_go_idle(host);
 		err = mmc_sdio_init_card(host, host->ocr, host->card,
 					mmc_card_keep_power(host));
-	else if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
+	} else if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
 		/* We may have switched to 1-bit mode during suspend */
 		err = sdio_enable_4bit_bus(host->card);
 		if (err > 0) {
@@ -1020,6 +1034,10 @@ static int mmc_sdio_power_restore(struct mmc_host *host)
 		goto out;
 	}
 
+	if (mmc_host_uhs(host))
+		/* to query card if 1.8V signalling is supported */
+		host->ocr |= R4_18V_PRESENT;
+
 	ret = mmc_sdio_init_card(host, host->ocr, host->card,
 				mmc_card_keep_power(host));
 	if (!ret && host->sdio_irqs)
@@ -1085,6 +1103,10 @@ int mmc_attach_sdio(struct mmc_host *host)
 	/*
 	 * Detect and init the card.
 	 */
+	if (mmc_host_uhs(host))
+		/* to query card if 1.8V signalling is supported */
+		host->ocr |= R4_18V_PRESENT;
+
 	err = mmc_sdio_init_card(host, host->ocr, NULL, 0);
 	if (err) {
 		if (err == -EAGAIN) {

drivers/mmc/core/slot-gpio.c

@@ -92,6 +92,20 @@ int mmc_gpio_get_cd(struct mmc_host *host)
 }
 EXPORT_SYMBOL(mmc_gpio_get_cd);
 
+/**
+ * mmc_gpio_request_ro - request a gpio for write-protection
+ * @host: mmc host
+ * @gpio: gpio number requested
+ *
+ * As devm_* managed functions are used in mmc_gpio_request_ro(), client
+ * drivers do not need to explicitly call mmc_gpio_free_ro() for freeing up,
+ * if the requesting and freeing are only needed at probing and unbinding time
+ * for once.  However, if client drivers do something special like runtime
+ * switching for write-protection, they are responsible for calling
+ * mmc_gpio_request_ro() and mmc_gpio_free_ro() as a pair on their own.
+ *
+ * Returns zero on success, else an error.
+ */
 int mmc_gpio_request_ro(struct mmc_host *host, unsigned int gpio)
 {
 	struct mmc_gpio *ctx;
@@ -106,7 +120,8 @@ int mmc_gpio_request_ro(struct mmc_host *host, unsigned int gpio)
 
 	ctx = host->slot.handler_priv;
 
-	ret = gpio_request_one(gpio, GPIOF_DIR_IN, ctx->ro_label);
+	ret = devm_gpio_request_one(&host->class_dev, gpio, GPIOF_DIR_IN,
+				    ctx->ro_label);
 	if (ret < 0)
 		return ret;
 
@@ -116,6 +131,20 @@ int mmc_gpio_request_ro(struct mmc_host *host, unsigned int gpio)
 }
 EXPORT_SYMBOL(mmc_gpio_request_ro);
 
+/**
+ * mmc_gpio_request_cd - request a gpio for card-detection
+ * @host: mmc host
+ * @gpio: gpio number requested
+ *
+ * As devm_* managed functions are used in mmc_gpio_request_cd(), client
+ * drivers do not need to explicitly call mmc_gpio_free_cd() for freeing up,
+ * if the requesting and freeing are only needed at probing and unbinding time
+ * for once.  However, if client drivers do something special like runtime
+ * switching for card-detection, they are responsible for calling
+ * mmc_gpio_request_cd() and mmc_gpio_free_cd() as a pair on their own.
+ *
+ * Returns zero on success, else an error.
+ */
 int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio)
 {
 	struct mmc_gpio *ctx;
@@ -128,7 +157,8 @@ int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio)
 
 	ctx = host->slot.handler_priv;
 
-	ret = gpio_request_one(gpio, GPIOF_DIR_IN, ctx->cd_label);
+	ret = devm_gpio_request_one(&host->class_dev, gpio, GPIOF_DIR_IN,
+				    ctx->cd_label);
 	if (ret < 0)
 		/*
 		 * don't bother freeing memory. It might still get used by other
@@ -146,7 +176,8 @@ int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio)
 		irq = -EINVAL;
 
 	if (irq >= 0) {
-		ret = request_threaded_irq(irq, NULL, mmc_gpio_cd_irqt,
+		ret = devm_request_threaded_irq(&host->class_dev, irq,
+			NULL, mmc_gpio_cd_irqt,
 			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 			ctx->cd_label, host);
 		if (ret < 0)
@@ -164,6 +195,13 @@ int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio)
 }
 EXPORT_SYMBOL(mmc_gpio_request_cd);
 
+/**
+ * mmc_gpio_free_ro - free the write-protection gpio
+ * @host: mmc host
+ *
+ * It's provided only for cases that client drivers need to manually free
+ * up the write-protection gpio requested by mmc_gpio_request_ro().
+ */
 void mmc_gpio_free_ro(struct mmc_host *host)
 {
 	struct mmc_gpio *ctx = host->slot.handler_priv;
@@ -175,10 +213,17 @@ void mmc_gpio_free_ro(struct mmc_host *host)
 	gpio = ctx->ro_gpio;
 	ctx->ro_gpio = -EINVAL;
 
-	gpio_free(gpio);
+	devm_gpio_free(&host->class_dev, gpio);
 }
 EXPORT_SYMBOL(mmc_gpio_free_ro);
 
+/**
+ * mmc_gpio_free_cd - free the card-detection gpio
+ * @host: mmc host
+ *
+ * It's provided only for cases that client drivers need to manually free
+ * up the card-detection gpio requested by mmc_gpio_request_cd().
+ */
 void mmc_gpio_free_cd(struct mmc_host *host)
 {
 	struct mmc_gpio *ctx = host->slot.handler_priv;
@@ -188,13 +233,13 @@ void mmc_gpio_free_cd(struct mmc_host *host)
 		return;
 
 	if (host->slot.cd_irq >= 0) {
-		free_irq(host->slot.cd_irq, host);
+		devm_free_irq(&host->class_dev, host->slot.cd_irq, host);
 		host->slot.cd_irq = -EINVAL;
 	}
 
 	gpio = ctx->cd_gpio;
 	ctx->cd_gpio = -EINVAL;
 
-	gpio_free(gpio);
+	devm_gpio_free(&host->class_dev, gpio);
 }
 EXPORT_SYMBOL(mmc_gpio_free_cd);

drivers/mmc/host/Kconfig

@@ -238,6 +238,17 @@ config MMC_SDHCI_S3C_DMA
 
 	  YMMV.
 
+config MMC_SDHCI_BCM2835
+	tristate "SDHCI platform support for the BCM2835 SD/MMC Controller"
+	depends on ARCH_BCM2835
+	depends on MMC_SDHCI_PLTFM
+	select MMC_SDHCI_IO_ACCESSORS
+	help
+	  This selects the BCM2835 SD/MMC controller. If you have a BCM2835
+	  platform with SD or MMC devices, say Y or M here.
+
+	  If unsure, say N.
+
 config MMC_OMAP
 	tristate "TI OMAP Multimedia Card Interface support"
 	depends on ARCH_OMAP
@@ -361,6 +372,13 @@ config MMC_DAVINCI
           If you have an DAVINCI board with a Multimedia Card slot,
           say Y or M here.  If unsure, say N.
 
+config MMC_GOLDFISH
+	tristate "goldfish qemu Multimedia Card Interface support"
+	depends on GOLDFISH
+	help
+	  This selects the Goldfish Multimedia card Interface emulation
+	  found on the Goldfish Android virtual device emulation.
+
 config MMC_SPI
 	tristate "MMC/SD/SDIO over SPI"
 	depends on SPI_MASTER && !HIGHMEM && HAS_DMA

drivers/mmc/host/Makefile

@@ -23,6 +23,7 @@ obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
 obj-$(CONFIG_MMC_MSM)		+= msm_sdcc.o
 obj-$(CONFIG_MMC_MVSDIO)	+= mvsdio.o
 obj-$(CONFIG_MMC_DAVINCI)       += davinci_mmc.o
+obj-$(CONFIG_MMC_GOLDFISH)	+= android-goldfish.o
 obj-$(CONFIG_MMC_SPI)		+= mmc_spi.o
 ifeq ($(CONFIG_OF),y)
 obj-$(CONFIG_MMC_SPI)		+= of_mmc_spi.o
@@ -58,6 +59,7 @@ obj-$(CONFIG_MMC_SDHCI_DOVE)		+= sdhci-dove.o
 obj-$(CONFIG_MMC_SDHCI_TEGRA)		+= sdhci-tegra.o
 obj-$(CONFIG_MMC_SDHCI_OF_ESDHC)	+= sdhci-of-esdhc.o
 obj-$(CONFIG_MMC_SDHCI_OF_HLWD)		+= sdhci-of-hlwd.o
+obj-$(CONFIG_MMC_SDHCI_BCM2835)		+= sdhci-bcm2835.o
 
 ifeq ($(CONFIG_CB710_DEBUG),y)
 	CFLAGS-cb710-mmc	+= -DDEBUG

drivers/mmc/host/android-goldfish.c

+/*
+ *  Copyright 2007, Google Inc.
+ *  Copyright 2012, Intel Inc.
+ *
+ *  based on omap.c driver, which was
+ *  Copyright (C) 2004 Nokia Corporation
+ *  Written by Tuukka Tikkanen and Juha Yrjölä <juha.yrjola@nokia.com>
+ *  Misc hacks here and there by Tony Lindgren <tony@atomide.com>
+ *  Other hacks (DMA, SD, etc) by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/major.h>
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/hdreg.h>
+#include <linux/kdev_t.h>
+#include <linux/blkdev.h>
+#include <linux/mutex.h>
+#include <linux/scatterlist.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/scatterlist.h>
+
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#define DRIVER_NAME "goldfish_mmc"
+
+#define BUFFER_SIZE   16384
+
+#define GOLDFISH_MMC_READ(host, addr)   (readl(host->reg_base + addr))
+#define GOLDFISH_MMC_WRITE(host, addr, x)   (writel(x, host->reg_base + addr))
+
+enum {
+	/* status register */
+	MMC_INT_STATUS	        = 0x00,
+	/* set this to enable IRQ */
+	MMC_INT_ENABLE	        = 0x04,
+	/* set this to specify buffer address */
+	MMC_SET_BUFFER          = 0x08,
+
+	/* MMC command number */
+	MMC_CMD	                = 0x0C,
+
+	/* MMC argument */
+	MMC_ARG	                = 0x10,
+
+	/* MMC response (or R2 bits 0 - 31) */
+	MMC_RESP_0		        = 0x14,
+
+	/* MMC R2 response bits 32 - 63 */
+	MMC_RESP_1		        = 0x18,
+
+	/* MMC R2 response bits 64 - 95 */
+	MMC_RESP_2		        = 0x1C,
+
+	/* MMC R2 response bits 96 - 127 */
+	MMC_RESP_3		        = 0x20,
+
+	MMC_BLOCK_LENGTH        = 0x24,
+	MMC_BLOCK_COUNT         = 0x28,
+
+	/* MMC state flags */
+	MMC_STATE               = 0x2C,
+
+	/* MMC_INT_STATUS bits */
+
+	MMC_STAT_END_OF_CMD     = 1U << 0,
+	MMC_STAT_END_OF_DATA    = 1U << 1,
+	MMC_STAT_STATE_CHANGE   = 1U << 2,
+	MMC_STAT_CMD_TIMEOUT    = 1U << 3,
+
+	/* MMC_STATE bits */
+	MMC_STATE_INSERTED     = 1U << 0,
+	MMC_STATE_READ_ONLY    = 1U << 1,
+};
+
+/*
+ * Command types
+ */
+#define OMAP_MMC_CMDTYPE_BC	0
+#define OMAP_MMC_CMDTYPE_BCR	1
+#define OMAP_MMC_CMDTYPE_AC	2
+#define OMAP_MMC_CMDTYPE_ADTC	3
+
+
+struct goldfish_mmc_host {
+	struct mmc_request	*mrq;
+	struct mmc_command	*cmd;
+	struct mmc_data		*data;
+	struct mmc_host		*mmc;
+	struct device		*dev;
+	unsigned char		id; /* 16xx chips have 2 MMC blocks */
+	void __iomem		*virt_base;
+	unsigned int		phys_base;
+	int			irq;
+	unsigned char		bus_mode;
+	unsigned char		hw_bus_mode;
+
+	unsigned int		sg_len;
+	unsigned		dma_done:1;
+	unsigned		dma_in_use:1;
+
+	void __iomem		*reg_base;
+};
+
+static inline int
+goldfish_mmc_cover_is_open(struct goldfish_mmc_host *host)
+{
+	return 0;
+}
+
+static ssize_t
+goldfish_mmc_show_cover_switch(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct goldfish_mmc_host *host = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", goldfish_mmc_cover_is_open(host) ? "open" :
+		       "closed");
+}
+
+static DEVICE_ATTR(cover_switch, S_IRUGO, goldfish_mmc_show_cover_switch, NULL);
+
+static void
+goldfish_mmc_start_command(struct goldfish_mmc_host *host, struct mmc_command *cmd)
+{
+	u32 cmdreg;
+	u32 resptype;
+	u32 cmdtype;
+
+	host->cmd = cmd;
+
+	resptype = 0;
+	cmdtype = 0;
+
+	/* Our hardware needs to know exact type */
+	switch (mmc_resp_type(cmd)) {
+	case MMC_RSP_NONE:
+		break;
+	case MMC_RSP_R1:
+	case MMC_RSP_R1B:
+		/* resp 1, 1b, 6, 7 */
+		resptype = 1;
+		break;
+	case MMC_RSP_R2:
+		resptype = 2;
+		break;
+	case MMC_RSP_R3:
+		resptype = 3;
+		break;
+	default:
+		dev_err(mmc_dev(host->mmc),
+			"Invalid response type: %04x\n", mmc_resp_type(cmd));
+		break;
+	}
+
+	if (mmc_cmd_type(cmd) == MMC_CMD_ADTC)
+		cmdtype = OMAP_MMC_CMDTYPE_ADTC;
+	else if (mmc_cmd_type(cmd) == MMC_CMD_BC)
+		cmdtype = OMAP_MMC_CMDTYPE_BC;
+	else if (mmc_cmd_type(cmd) == MMC_CMD_BCR)
+		cmdtype = OMAP_MMC_CMDTYPE_BCR;
+	else
+		cmdtype = OMAP_MMC_CMDTYPE_AC;
+
+	cmdreg = cmd->opcode | (resptype << 8) | (cmdtype << 12);
+
+	if (host->bus_mode == MMC_BUSMODE_OPENDRAIN)
+		cmdreg |= 1 << 6;
+
+	if (cmd->flags & MMC_RSP_BUSY)
+		cmdreg |= 1 << 11;
+
+	if (host->data && !(host->data->flags & MMC_DATA_WRITE))
+		cmdreg |= 1 << 15;
+
+	GOLDFISH_MMC_WRITE(host, MMC_ARG, cmd->arg);
+	GOLDFISH_MMC_WRITE(host, MMC_CMD, cmdreg);
+}
+
+static void goldfish_mmc_xfer_done(struct goldfish_mmc_host *host,
+				   struct mmc_data *data)
+{
+	if (host->dma_in_use) {
+		enum dma_data_direction dma_data_dir;
+
+		if (data->flags & MMC_DATA_WRITE)
+			dma_data_dir = DMA_TO_DEVICE;
+		else
+			dma_data_dir = DMA_FROM_DEVICE;
+
+		if (dma_data_dir == DMA_FROM_DEVICE) {
+			/*
+			 * We don't really have DMA, so we need
+			 * to copy from our platform driver buffer
+			 */
+			uint8_t *dest = (uint8_t *)sg_virt(data->sg);
+			memcpy(dest, host->virt_base, data->sg->length);
+		}
+		host->data->bytes_xfered += data->sg->length;
+		dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->sg_len,
+			     dma_data_dir);
+	}
+
+	host->data = NULL;
+	host->sg_len = 0;
+
+	/*
+	 * NOTE:  MMC layer will sometimes poll-wait CMD13 next, issuing
+	 * dozens of requests until the card finishes writing data.
+	 * It'd be cheaper to just wait till an EOFB interrupt arrives...
+	 */
+
+	if (!data->stop) {
+		host->mrq = NULL;
+		mmc_request_done(host->mmc, data->mrq);
+		return;
+	}
+
+	goldfish_mmc_start_command(host, data->stop);
+}
+
+static void goldfish_mmc_end_of_data(struct goldfish_mmc_host *host,
+				     struct mmc_data *data)
+{
+	if (!host->dma_in_use) {
+		goldfish_mmc_xfer_done(host, data);
+		return;
+	}
+	if (host->dma_done)
+		goldfish_mmc_xfer_done(host, data);
+}
+
+static void goldfish_mmc_cmd_done(struct goldfish_mmc_host *host,
+				  struct mmc_command *cmd)
+{
+	host->cmd = NULL;
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		if (cmd->flags & MMC_RSP_136) {
+			/* response type 2 */
+			cmd->resp[3] =
+				GOLDFISH_MMC_READ(host, MMC_RESP_0);
+			cmd->resp[2] =
+				GOLDFISH_MMC_READ(host, MMC_RESP_1);
+			cmd->resp[1] =
+				GOLDFISH_MMC_READ(host, MMC_RESP_2);
+			cmd->resp[0] =
+				GOLDFISH_MMC_READ(host, MMC_RESP_3);
+		} else {
+			/* response types 1, 1b, 3, 4, 5, 6 */
+			cmd->resp[0] =
+				GOLDFISH_MMC_READ(host, MMC_RESP_0);
+		}
+	}
+
+	if (host->data == NULL || cmd->error) {
+		host->mrq = NULL;
+		mmc_request_done(host->mmc, cmd->mrq);
+	}
+}
+
+static irqreturn_t goldfish_mmc_irq(int irq, void *dev_id)
+{
+	struct goldfish_mmc_host *host = (struct goldfish_mmc_host *)dev_id;
+	u16 status;
+	int end_command = 0;
+	int end_transfer = 0;
+	int transfer_error = 0;
+	int state_changed = 0;
+	int cmd_timeout = 0;
+
+	while ((status = GOLDFISH_MMC_READ(host, MMC_INT_STATUS)) != 0) {
+		GOLDFISH_MMC_WRITE(host, MMC_INT_STATUS, status);
+
+		if (status & MMC_STAT_END_OF_CMD)
+			end_command = 1;
+
+		if (status & MMC_STAT_END_OF_DATA)
+			end_transfer = 1;
+
+		if (status & MMC_STAT_STATE_CHANGE)
+			state_changed = 1;
+
+                if (status & MMC_STAT_CMD_TIMEOUT) {
+			end_command = 0;
+			cmd_timeout = 1;
+                }
+	}
+
+	if (cmd_timeout) {
+		struct mmc_request *mrq = host->mrq;
+		mrq->cmd->error = -ETIMEDOUT;
+		host->mrq = NULL;
+		mmc_request_done(host->mmc, mrq);
+	}
+
+	if (end_command)
+		goldfish_mmc_cmd_done(host, host->cmd);
+
+	if (transfer_error)
+		goldfish_mmc_xfer_done(host, host->data);
+	else if (end_transfer) {
+		host->dma_done = 1;
+		goldfish_mmc_end_of_data(host, host->data);
+	} else if (host->data != NULL) {
+		/*
+		 * WORKAROUND -- after porting this driver from 2.6 to 3.4,
+		 * during device initialization, cases where host->data is
+		 * non-null but end_transfer is false would occur. Doing
+		 * nothing in such cases results in no further interrupts,
+		 * and initialization failure.
+		 * TODO -- find the real cause.
+		 */
+		host->dma_done = 1;
+		goldfish_mmc_end_of_data(host, host->data);
+	}
+
+	if (state_changed) {
+		u32 state = GOLDFISH_MMC_READ(host, MMC_STATE);
+		pr_info("%s: Card detect now %d\n", __func__,
+			(state & MMC_STATE_INSERTED));
+		mmc_detect_change(host->mmc, 0);
+	}
+
+	if (!end_command && !end_transfer &&
+	    !transfer_error && !state_changed && !cmd_timeout) {
+		status = GOLDFISH_MMC_READ(host, MMC_INT_STATUS);
+		dev_info(mmc_dev(host->mmc),"spurious irq 0x%04x\n", status);
+		if (status != 0) {
+			GOLDFISH_MMC_WRITE(host, MMC_INT_STATUS, status);
+			GOLDFISH_MMC_WRITE(host, MMC_INT_ENABLE, 0);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void goldfish_mmc_prepare_data(struct goldfish_mmc_host *host,
+				      struct mmc_request *req)
+{
+	struct mmc_data *data = req->data;
+	int block_size;
+	unsigned sg_len;
+	enum dma_data_direction dma_data_dir;
+
+	host->data = data;
+	if (data == NULL) {
+		GOLDFISH_MMC_WRITE(host, MMC_BLOCK_LENGTH, 0);
+		GOLDFISH_MMC_WRITE(host, MMC_BLOCK_COUNT, 0);
+		host->dma_in_use = 0;
+		return;
+	}
+
+	block_size = data->blksz;
+
+	GOLDFISH_MMC_WRITE(host, MMC_BLOCK_COUNT, data->blocks - 1);
+	GOLDFISH_MMC_WRITE(host, MMC_BLOCK_LENGTH, block_size - 1);
+
+	/*
+	 * Cope with calling layer confusion; it issues "single
+	 * block" writes using multi-block scatterlists.
+	 */
+	sg_len = (data->blocks == 1) ? 1 : data->sg_len;
+
+	if (data->flags & MMC_DATA_WRITE)
+		dma_data_dir = DMA_TO_DEVICE;
+	else
+		dma_data_dir = DMA_FROM_DEVICE;
+
+	host->sg_len = dma_map_sg(mmc_dev(host->mmc), data->sg,
+				  sg_len, dma_data_dir);
+	host->dma_done = 0;
+	host->dma_in_use = 1;
+
+	if (dma_data_dir == DMA_TO_DEVICE) {
+		/*
+		 * We don't really have DMA, so we need to copy to our
+		 * platform driver buffer
+		 */
+		const uint8_t *src = (uint8_t *)sg_virt(data->sg);
+		memcpy(host->virt_base, src, data->sg->length);
+	}
+}
+
+static void goldfish_mmc_request(struct mmc_host *mmc, struct mmc_request *req)
+{
+	struct goldfish_mmc_host *host = mmc_priv(mmc);
+
+	WARN_ON(host->mrq != NULL);
+
+	host->mrq = req;
+	goldfish_mmc_prepare_data(host, req);
+	goldfish_mmc_start_command(host, req->cmd);
+
+	/*
+	 * This is to avoid accidentally being detected as an SDIO card
+	 * in mmc_attach_sdio().
+	 */
+	if (req->cmd->opcode == SD_IO_SEND_OP_COND &&
+	    req->cmd->flags == (MMC_RSP_SPI_R4 | MMC_RSP_R4 | MMC_CMD_BCR))
+		req->cmd->error = -EINVAL;
+}
+
+static void goldfish_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct goldfish_mmc_host *host = mmc_priv(mmc);
+
+	host->bus_mode = ios->bus_mode;
+	host->hw_bus_mode = host->bus_mode;
+}
+
+static int goldfish_mmc_get_ro(struct mmc_host *mmc)
+{
+	uint32_t state;
+	struct goldfish_mmc_host *host = mmc_priv(mmc);
+
+	state = GOLDFISH_MMC_READ(host, MMC_STATE);
+	return ((state & MMC_STATE_READ_ONLY) != 0);
+}
+
+static const struct mmc_host_ops goldfish_mmc_ops = {
+	.request	= goldfish_mmc_request,
+	.set_ios	= goldfish_mmc_set_ios,
+	.get_ro		= goldfish_mmc_get_ro,
+};
+
+static int goldfish_mmc_probe(struct platform_device *pdev)
+{
+	struct mmc_host *mmc;
+	struct goldfish_mmc_host *host = NULL;
+	struct resource *res;
+	int ret = 0;
+	int irq;
+	dma_addr_t buf_addr;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(pdev, 0);
+	if (res == NULL || irq < 0)
+		return -ENXIO;
+
+	mmc = mmc_alloc_host(sizeof(struct goldfish_mmc_host), &pdev->dev);
+	if (mmc == NULL) {
+		ret = -ENOMEM;
+		goto err_alloc_host_failed;
+	}
+
+	host = mmc_priv(mmc);
+	host->mmc = mmc;
+
+	pr_err("mmc: Mapping %lX to %lX\n", (long)res->start, (long)res->end);
+	host->reg_base = ioremap(res->start, res->end - res->start + 1);
+	if (host->reg_base == NULL) {
+		ret = -ENOMEM;
+		goto ioremap_failed;
+	}
+	host->virt_base = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE,
+					     &buf_addr, GFP_KERNEL);
+
+	if (host->virt_base == 0) {
+		ret = -ENOMEM;
+		goto dma_alloc_failed;
+	}
+	host->phys_base = buf_addr;
+
+	host->id = pdev->id;
+	host->irq = irq;
+
+	mmc->ops = &goldfish_mmc_ops;
+	mmc->f_min = 400000;
+	mmc->f_max = 24000000;
+	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+	mmc->caps = MMC_CAP_4_BIT_DATA;
+
+	/* Use scatterlist DMA to reduce per-transfer costs.
+	 * NOTE max_seg_size assumption that small blocks aren't
+	 * normally used (except e.g. for reading SD registers).
+	 */
+	mmc->max_segs = 32;
+	mmc->max_blk_size = 2048;	/* MMC_BLOCK_LENGTH is 11 bits (+1) */
+	mmc->max_blk_count = 2048;	/* MMC_BLOCK_COUNT is 11 bits (+1) */
+	mmc->max_req_size = BUFFER_SIZE;
+	mmc->max_seg_size = mmc->max_req_size;
+
+	ret = request_irq(host->irq, goldfish_mmc_irq, 0, DRIVER_NAME, host);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed IRQ Adding goldfish MMC\n");
+		goto err_request_irq_failed;
+	}
+
+	host->dev = &pdev->dev;
+	platform_set_drvdata(pdev, host);
+
+	ret = device_create_file(&pdev->dev, &dev_attr_cover_switch);
+	if (ret)
+		dev_warn(mmc_dev(host->mmc),
+			 "Unable to create sysfs attributes\n");
+
+	GOLDFISH_MMC_WRITE(host, MMC_SET_BUFFER, host->phys_base);
+	GOLDFISH_MMC_WRITE(host, MMC_INT_ENABLE,
+			   MMC_STAT_END_OF_CMD | MMC_STAT_END_OF_DATA |
+			   MMC_STAT_STATE_CHANGE | MMC_STAT_CMD_TIMEOUT);
+
+	mmc_add_host(mmc);
+	return 0;
+
+err_request_irq_failed:
+	dma_free_coherent(&pdev->dev, BUFFER_SIZE, host->virt_base,
+			  host->phys_base);
+dma_alloc_failed:
+	iounmap(host->reg_base);
+ioremap_failed:
+	mmc_free_host(host->mmc);
+err_alloc_host_failed:
+	return ret;
+}
+
+static int goldfish_mmc_remove(struct platform_device *pdev)
+{
+	struct goldfish_mmc_host *host = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	BUG_ON(host == NULL);
+
+	mmc_remove_host(host->mmc);
+	free_irq(host->irq, host);
+	dma_free_coherent(&pdev->dev, BUFFER_SIZE, host->virt_base, host->phys_base);
+	iounmap(host->reg_base);
+	mmc_free_host(host->mmc);
+	return 0;
+}
+
+static struct platform_driver goldfish_mmc_driver = {
+	.probe		= goldfish_mmc_probe,
+	.remove		= goldfish_mmc_remove,
+	.driver		= {
+		.name	= DRIVER_NAME,
+	},
+};
+
+module_platform_driver(goldfish_mmc_driver);
+MODULE_LICENSE("GPL v2");

drivers/mmc/host/dw_mmc-exynos.c

@@ -175,16 +175,6 @@ static int dw_mci_exynos_setup_bus(struct dw_mci *host,
 		}
 	}
 
-	gpio = of_get_named_gpio(slot_np, "wp-gpios", 0);
-	if (gpio_is_valid(gpio)) {
-		if (devm_gpio_request(host->dev, gpio, "dw-mci-wp"))
-			dev_info(host->dev, "gpio [%d] request failed\n",
-						gpio);
-	} else {
-		dev_info(host->dev, "wp gpio not available");
-		host->pdata->quirks |= DW_MCI_QUIRK_NO_WRITE_PROTECT;
-	}
-
 	if (host->pdata->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
 		return 0;
 

drivers/mmc/host/dw_mmc.c

@@ -34,6 +34,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/workqueue.h>
 #include <linux/of.h>
+#include <linux/of_gpio.h>
 
 #include "dw_mmc.h"
 
@@ -74,6 +75,8 @@ struct idmac_desc {
  * struct dw_mci_slot - MMC slot state
  * @mmc: The mmc_host representing this slot.
  * @host: The MMC controller this slot is using.
+ * @quirks: Slot-level quirks (DW_MCI_SLOT_QUIRK_XXX)
+ * @wp_gpio: If gpio_is_valid() we'll use this to read write protect.
  * @ctype: Card type for this slot.
  * @mrq: mmc_request currently being processed or waiting to be
  *	processed, or NULL when the slot is idle.
@@ -88,6 +91,9 @@ struct dw_mci_slot {
 	struct mmc_host		*mmc;
 	struct dw_mci		*host;
 
+	int			quirks;
+	int			wp_gpio;
+
 	u32			ctype;
 
 	struct mmc_request	*mrq;
@@ -825,10 +831,12 @@ static int dw_mci_get_ro(struct mmc_host *mmc)
 	struct dw_mci_board *brd = slot->host->pdata;
 
 	/* Use platform get_ro function, else try on board write protect */
-	if (brd->quirks & DW_MCI_QUIRK_NO_WRITE_PROTECT)
+	if (slot->quirks & DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT)
 		read_only = 0;
 	else if (brd->get_ro)
 		read_only = brd->get_ro(slot->id);
+	else if (gpio_is_valid(slot->wp_gpio))
+		read_only = gpio_get_value(slot->wp_gpio);
 	else
 		read_only =
 			mci_readl(slot->host, WRTPRT) & (1 << slot->id) ? 1 : 0;
@@ -1785,6 +1793,30 @@ static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot)
 	return NULL;
 }
 
+static struct dw_mci_of_slot_quirks {
+	char *quirk;
+	int id;
+} of_slot_quirks[] = {
+	{
+		.quirk	= "disable-wp",
+		.id	= DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT,
+	},
+};
+
+static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
+{
+	struct device_node *np = dw_mci_of_find_slot_node(dev, slot);
+	int quirks = 0;
+	int idx;
+
+	/* get quirks */
+	for (idx = 0; idx < ARRAY_SIZE(of_slot_quirks); idx++)
+		if (of_get_property(np, of_slot_quirks[idx].quirk, NULL))
+			quirks |= of_slot_quirks[idx].id;
+
+	return quirks;
+}
+
 /* find out bus-width for a given slot */
 static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot)
 {
@@ -1799,7 +1831,34 @@ static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot)
 			       " as 1\n");
 	return bus_wd;
 }
+
+/* find the write protect gpio for a given slot; or -1 if none specified */
+static int dw_mci_of_get_wp_gpio(struct device *dev, u8 slot)
+{
+	struct device_node *np = dw_mci_of_find_slot_node(dev, slot);
+	int gpio;
+
+	if (!np)
+		return -EINVAL;
+
+	gpio = of_get_named_gpio(np, "wp-gpios", 0);
+
+	/* Having a missing entry is valid; return silently */
+	if (!gpio_is_valid(gpio))
+		return -EINVAL;
+
+	if (devm_gpio_request(dev, gpio, "dw-mci-wp")) {
+		dev_warn(dev, "gpio [%d] request failed\n", gpio);
+		return -EINVAL;
+	}
+
+	return gpio;
+}
 #else /* CONFIG_OF */
+static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
+{
+	return 0;
+}
 static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot)
 {
 	return 1;
@@ -1808,6 +1867,10 @@ static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot)
 {
 	return NULL;
 }
+static int dw_mci_of_get_wp_gpio(struct device *dev, u8 slot)
+{
+	return -EINVAL;
+}
 #endif /* CONFIG_OF */
 
 static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
@@ -1828,6 +1891,8 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
 	slot->host = host;
 	host->slot[id] = slot;
 
+	slot->quirks = dw_mci_of_get_slot_quirks(host->dev, slot->id);
+
 	mmc->ops = &dw_mci_ops;
 	mmc->f_min = DIV_ROUND_UP(host->bus_hz, 510);
 	mmc->f_max = host->bus_hz;
@@ -1923,6 +1988,8 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
 	else
 		clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
 
+	slot->wp_gpio = dw_mci_of_get_wp_gpio(host->dev, slot->id);
+
 	mmc_add_host(mmc);
 
 #if defined(CONFIG_DEBUG_FS)

drivers/mmc/host/mvsdio.c

@@ -21,7 +21,11 @@
 #include <linux/irq.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/of_irq.h>
 #include <linux/mmc/host.h>
+#include <linux/mmc/slot-gpio.h>
+#include <linux/pinctrl/consumer.h>
 
 #include <asm/sizes.h>
 #include <asm/unaligned.h>
@@ -51,8 +55,6 @@ struct mvsd_host {
 	struct mmc_host *mmc;
 	struct device *dev;
 	struct clk *clk;
-	int gpio_card_detect;
-	int gpio_write_protect;
 };
 
 #define mvsd_write(offs, val)	writel(val, iobase + (offs))
@@ -538,13 +540,6 @@ static void mvsd_timeout_timer(unsigned long data)
 		mmc_request_done(host->mmc, mrq);
 }
 
-static irqreturn_t mvsd_card_detect_irq(int irq, void *dev)
-{
-	struct mvsd_host *host = dev;
-	mmc_detect_change(host->mmc, msecs_to_jiffies(100));
-	return IRQ_HANDLED;
-}
-
 static void mvsd_enable_sdio_irq(struct mmc_host *mmc, int enable)
 {
 	struct mvsd_host *host = mmc_priv(mmc);
@@ -564,20 +559,6 @@ static void mvsd_enable_sdio_irq(struct mmc_host *mmc, int enable)
 	spin_unlock_irqrestore(&host->lock, flags);
 }
 
-static int mvsd_get_ro(struct mmc_host *mmc)
-{
-	struct mvsd_host *host = mmc_priv(mmc);
-
-	if (host->gpio_write_protect)
-		return gpio_get_value(host->gpio_write_protect);
-
-	/*
-	 * Board doesn't support read only detection; let the mmc core
-	 * decide what to do.
-	 */
-	return -ENOSYS;
-}
-
 static void mvsd_power_up(struct mvsd_host *host)
 {
 	void __iomem *iobase = host->base;
@@ -674,7 +655,7 @@ static void mvsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 static const struct mmc_host_ops mvsd_ops = {
 	.request		= mvsd_request,
-	.get_ro			= mvsd_get_ro,
+	.get_ro			= mmc_gpio_get_ro,
 	.set_ios		= mvsd_set_ios,
 	.enable_sdio_irq	= mvsd_enable_sdio_irq,
 };
@@ -703,17 +684,18 @@ mv_conf_mbus_windows(struct mvsd_host *host,
 
 static int __init mvsd_probe(struct platform_device *pdev)
 {
+	struct device_node *np = pdev->dev.of_node;
 	struct mmc_host *mmc = NULL;
 	struct mvsd_host *host = NULL;
-	const struct mvsdio_platform_data *mvsd_data;
 	const struct mbus_dram_target_info *dram;
 	struct resource *r;
 	int ret, irq;
+	int gpio_card_detect, gpio_write_protect;
+	struct pinctrl *pinctrl;
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_irq(pdev, 0);
-	mvsd_data = pdev->dev.platform_data;
-	if (!r || irq < 0 || !mvsd_data)
+	if (!r || irq < 0)
 		return -ENXIO;
 
 	mmc = mmc_alloc_host(sizeof(struct mvsd_host), &pdev->dev);
@@ -725,8 +707,43 @@ static int __init mvsd_probe(struct platform_device *pdev)
 	host = mmc_priv(mmc);
 	host->mmc = mmc;
 	host->dev = &pdev->dev;
+
+	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+	if (IS_ERR(pinctrl))
+		dev_warn(&pdev->dev, "no pins associated\n");
+
+	/*
+	 * Some non-DT platforms do not pass a clock, and the clock
+	 * frequency is passed through platform_data. On DT platforms,
+	 * a clock must always be passed, even if there is no gatable
+	 * clock associated to the SDIO interface (it can simply be a
+	 * fixed rate clock).
+	 */
+	host->clk = devm_clk_get(&pdev->dev, NULL);
+	if (!IS_ERR(host->clk))
+		clk_prepare_enable(host->clk);
+
+	if (np) {
+		if (IS_ERR(host->clk)) {
+			dev_err(&pdev->dev, "DT platforms must have a clock associated\n");
+			ret = -EINVAL;
+			goto out;
+		}
+
+		host->base_clock = clk_get_rate(host->clk) / 2;
+		gpio_card_detect = of_get_named_gpio(np, "cd-gpios", 0);
+		gpio_write_protect = of_get_named_gpio(np, "wp-gpios", 0);
+	} else {
+		const struct mvsdio_platform_data *mvsd_data;
+		mvsd_data = pdev->dev.platform_data;
+		if (!mvsd_data) {
+			ret = -ENXIO;
+			goto out;
+		}
 		host->base_clock = mvsd_data->clock / 2;
-	host->clk = ERR_PTR(-EINVAL);
+		gpio_card_detect = mvsd_data->gpio_card_detect;
+		gpio_write_protect = mvsd_data->gpio_write_protect;
+	}
 
 	mmc->ops = &mvsd_ops;
 
@@ -765,43 +782,14 @@ static int __init mvsd_probe(struct platform_device *pdev)
 		goto out;
 	}
 
-	/* Not all platforms can gate the clock, so it is not
-	   an error if the clock does not exists. */
-	host->clk = devm_clk_get(&pdev->dev, NULL);
-	if (!IS_ERR(host->clk))
-		clk_prepare_enable(host->clk);
-
-	if (mvsd_data->gpio_card_detect) {
-		ret = devm_gpio_request_one(&pdev->dev,
-					    mvsd_data->gpio_card_detect,
-					    GPIOF_IN, DRIVER_NAME " cd");
-		if (ret == 0) {
-			irq = gpio_to_irq(mvsd_data->gpio_card_detect);
-			ret = devm_request_irq(&pdev->dev, irq,
-					       mvsd_card_detect_irq,
-					       IRQ_TYPE_EDGE_RISING |
-					       IRQ_TYPE_EDGE_FALLING,
-					       DRIVER_NAME " cd", host);
-			if (ret == 0)
-				host->gpio_card_detect =
-					mvsd_data->gpio_card_detect;
-			else
-				devm_gpio_free(&pdev->dev,
-					       mvsd_data->gpio_card_detect);
-		}
-	}
-	if (!host->gpio_card_detect)
+	if (gpio_is_valid(gpio_card_detect)) {
+		ret = mmc_gpio_request_cd(mmc, gpio_card_detect);
+		if (ret)
+			goto out;
+	} else
 		mmc->caps |= MMC_CAP_NEEDS_POLL;
 
-	if (mvsd_data->gpio_write_protect) {
-		ret = devm_gpio_request_one(&pdev->dev,
-					    mvsd_data->gpio_write_protect,
-					    GPIOF_IN, DRIVER_NAME " wp");
-		if (ret == 0) {
-			host->gpio_write_protect =
-				mvsd_data->gpio_write_protect;
-		}
-	}
+	mmc_gpio_request_ro(mmc, gpio_write_protect);
 
 	setup_timer(&host->timer, mvsd_timeout_timer, (unsigned long)host);
 	platform_set_drvdata(pdev, mmc);
@@ -811,15 +799,17 @@ static int __init mvsd_probe(struct platform_device *pdev)
 
 	pr_notice("%s: %s driver initialized, ",
 			   mmc_hostname(mmc), DRIVER_NAME);
-	if (host->gpio_card_detect)
+	if (!(mmc->caps & MMC_CAP_NEEDS_POLL))
 		printk("using GPIO %d for card detection\n",
-		       host->gpio_card_detect);
+		       gpio_card_detect);
 	else
 		printk("lacking card detect (fall back to polling)\n");
 	return 0;
 
 out:
 	if (mmc) {
+		mmc_gpio_free_cd(mmc);
+		mmc_gpio_free_ro(mmc);
 		if (!IS_ERR(host->clk))
 			clk_disable_unprepare(host->clk);
 		mmc_free_host(mmc);
@@ -834,6 +824,8 @@ static int __exit mvsd_remove(struct platform_device *pdev)
 
 	struct mvsd_host *host = mmc_priv(mmc);
 
+	mmc_gpio_free_cd(mmc);
+	mmc_gpio_free_ro(mmc);
 	mmc_remove_host(mmc);
 	del_timer_sync(&host->timer);
 	mvsd_power_down(host);
@@ -873,12 +865,19 @@ static int mvsd_resume(struct platform_device *dev)
 #define mvsd_resume	NULL
 #endif
 
+static const struct of_device_id mvsdio_dt_ids[] = {
+	{ .compatible = "marvell,orion-sdio" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mvsdio_dt_ids);
+
 static struct platform_driver mvsd_driver = {
 	.remove		= __exit_p(mvsd_remove),
 	.suspend	= mvsd_suspend,
 	.resume		= mvsd_resume,
 	.driver		= {
 		.name	= DRIVER_NAME,
+		.of_match_table = mvsdio_dt_ids,
 	},
 };
 

drivers/mmc/host/mxs-mmc.c

@@ -354,7 +354,7 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
 	struct dma_async_tx_descriptor *desc;
 	struct scatterlist *sgl = data->sg, *sg;
 	unsigned int sg_len = data->sg_len;
-	int i;
+	unsigned int i;
 
 	unsigned short dma_data_dir, timeout;
 	enum dma_transfer_direction slave_dirn;
@@ -804,3 +804,4 @@ module_platform_driver(mxs_mmc_driver);
 MODULE_DESCRIPTION("FREESCALE MXS MMC peripheral");
 MODULE_AUTHOR("Freescale Semiconductor");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);

drivers/mmc/host/of_mmc_spi.c

@@ -146,7 +146,7 @@ struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi)
 		oms->pdata.get_ro = of_mmc_spi_get_ro;
 
 	oms->detect_irq = irq_of_parse_and_map(np, 0);
-	if (oms->detect_irq != NO_IRQ) {
+	if (oms->detect_irq != 0) {
 		oms->pdata.init = of_mmc_spi_init;
 		oms->pdata.exit = of_mmc_spi_exit;
 	} else {

drivers/mmc/host/rtsx_pci_sdmmc.c

@@ -1097,11 +1097,6 @@ static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
 		voltage = OUTPUT_1V8;
 
 	if (voltage == OUTPUT_1V8) {
-		err = rtsx_pci_write_register(pcr,
-				SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_B);
-		if (err < 0)
-			goto out;
-
 		err = sd_wait_voltage_stable_1(host);
 		if (err < 0)
 			goto out;

drivers/mmc/host/sdhci-bcm2835.c

+/*
+ * BCM2835 SDHCI
+ * Copyright (C) 2012 Stephen Warren
+ * Based on U-Boot's MMC driver for the BCM2835 by Oleksandr Tymoshenko & me
+ * Portions of the code there were obviously based on the Linux kernel at:
+ * git://github.com/raspberrypi/linux.git rpi-3.6.y
+ * commit f5b930b "Main bcm2708 linux port" signed-off-by Dom Cobley.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/mmc/host.h>
+#include "sdhci-pltfm.h"
+
+/*
+ * 400KHz is max freq for card ID etc. Use that as min card clock. We need to
+ * know the min to enable static calculation of max BCM2835_SDHCI_WRITE_DELAY.
+ */
+#define MIN_FREQ 400000
+
+/*
+ * The Arasan has a bugette whereby it may lose the content of successive
+ * writes to registers that are within two SD-card clock cycles of each other
+ * (a clock domain crossing problem). It seems, however, that the data
+ * register does not have this problem, which is just as well - otherwise we'd
+ * have to nobble the DMA engine too.
+ *
+ * This should probably be dynamically calculated based on the actual card
+ * frequency. However, this is the longest we'll have to wait, and doesn't
+ * seem to slow access down too much, so the added complexity doesn't seem
+ * worth it for now.
+ *
+ * 1/MIN_FREQ is (max) time per tick of eMMC clock.
+ * 2/MIN_FREQ is time for two ticks.
+ * Multiply by 1000000 to get uS per two ticks.
+ * *1000000 for uSecs.
+ * +1 for hack rounding.
+ */
+#define BCM2835_SDHCI_WRITE_DELAY	(((2 * 1000000) / MIN_FREQ) + 1)
+
+struct bcm2835_sdhci {
+	u32 shadow;
+};
+
+static void bcm2835_sdhci_writel(struct sdhci_host *host, u32 val, int reg)
+{
+	writel(val, host->ioaddr + reg);
+
+	udelay(BCM2835_SDHCI_WRITE_DELAY);
+}
+
+static inline u32 bcm2835_sdhci_readl(struct sdhci_host *host, int reg)
+{
+	u32 val = readl(host->ioaddr + reg);
+
+	if (reg == SDHCI_CAPABILITIES)
+		val |= SDHCI_CAN_VDD_330;
+
+	return val;
+}
+
+static void bcm2835_sdhci_writew(struct sdhci_host *host, u16 val, int reg)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct bcm2835_sdhci *bcm2835_host = pltfm_host->priv;
+	u32 oldval = (reg == SDHCI_COMMAND) ? bcm2835_host->shadow :
+		bcm2835_sdhci_readl(host, reg & ~3);
+	u32 word_num = (reg >> 1) & 1;
+	u32 word_shift = word_num * 16;
+	u32 mask = 0xffff << word_shift;
+	u32 newval = (oldval & ~mask) | (val << word_shift);
+
+	if (reg == SDHCI_TRANSFER_MODE)
+		bcm2835_host->shadow = newval;
+	else
+		bcm2835_sdhci_writel(host, newval, reg & ~3);
+}
+
+static u16 bcm2835_sdhci_readw(struct sdhci_host *host, int reg)
+{
+	u32 val = bcm2835_sdhci_readl(host, (reg & ~3));
+	u32 word_num = (reg >> 1) & 1;
+	u32 word_shift = word_num * 16;
+	u32 word = (val >> word_shift) & 0xffff;
+
+	return word;
+}
+
+static void bcm2835_sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
+{
+	u32 oldval = bcm2835_sdhci_readl(host, reg & ~3);
+	u32 byte_num = reg & 3;
+	u32 byte_shift = byte_num * 8;
+	u32 mask = 0xff << byte_shift;
+	u32 newval = (oldval & ~mask) | (val << byte_shift);
+
+	bcm2835_sdhci_writel(host, newval, reg & ~3);
+}
+
+static u8 bcm2835_sdhci_readb(struct sdhci_host *host, int reg)
+{
+	u32 val = bcm2835_sdhci_readl(host, (reg & ~3));
+	u32 byte_num = reg & 3;
+	u32 byte_shift = byte_num * 8;
+	u32 byte = (val >> byte_shift) & 0xff;
+
+	return byte;
+}
+
+unsigned int bcm2835_sdhci_get_min_clock(struct sdhci_host *host)
+{
+	return MIN_FREQ;
+}
+
+static struct sdhci_ops bcm2835_sdhci_ops = {
+	.write_l = bcm2835_sdhci_writel,
+	.write_w = bcm2835_sdhci_writew,
+	.write_b = bcm2835_sdhci_writeb,
+	.read_l = bcm2835_sdhci_readl,
+	.read_w = bcm2835_sdhci_readw,
+	.read_b = bcm2835_sdhci_readb,
+	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
+	.get_min_clock = bcm2835_sdhci_get_min_clock,
+};
+
+static struct sdhci_pltfm_data bcm2835_sdhci_pdata = {
+	.quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
+		  SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK,
+	.ops = &bcm2835_sdhci_ops,
+};
+
+static int bcm2835_sdhci_probe(struct platform_device *pdev)
+{
+	struct sdhci_host *host;
+	struct bcm2835_sdhci *bcm2835_host;
+	struct sdhci_pltfm_host *pltfm_host;
+	int ret;
+
+	host = sdhci_pltfm_init(pdev, &bcm2835_sdhci_pdata);
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	bcm2835_host = devm_kzalloc(&pdev->dev, sizeof(*bcm2835_host),
+					GFP_KERNEL);
+	if (!bcm2835_host) {
+		dev_err(mmc_dev(host->mmc),
+			"failed to allocate bcm2835_sdhci\n");
+		return -ENOMEM;
+	}
+
+	pltfm_host = sdhci_priv(host);
+	pltfm_host->priv = bcm2835_host;
+
+	pltfm_host->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pltfm_host->clk)) {
+		ret = PTR_ERR(pltfm_host->clk);
+		goto err;
+	}
+
+	return sdhci_add_host(host);
+
+err:
+	sdhci_pltfm_free(pdev);
+	return ret;
+}
+
+static int bcm2835_sdhci_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
+
+	sdhci_remove_host(host, dead);
+	sdhci_pltfm_free(pdev);
+
+	return 0;
+}
+
+static const struct of_device_id bcm2835_sdhci_of_match[] = {
+	{ .compatible = "brcm,bcm2835-sdhci" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, bcm2835_sdhci_of_match);
+
+static struct platform_driver bcm2835_sdhci_driver = {
+	.driver = {
+		.name = "sdhci-bcm2835",
+		.owner = THIS_MODULE,
+		.of_match_table = bcm2835_sdhci_of_match,
+		.pm = SDHCI_PLTFM_PMOPS,
+	},
+	.probe = bcm2835_sdhci_probe,
+	.remove = bcm2835_sdhci_remove,
+};
+module_platform_driver(bcm2835_sdhci_driver);
+
+MODULE_DESCRIPTION("BCM2835 SDHCI driver");
+MODULE_AUTHOR("Stephen Warren");
+MODULE_LICENSE("GPL v2");

drivers/mmc/host/sdhci-esdhc-imx.c

@@ -21,6 +21,7 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/mmc.h>
 #include <linux/mmc/sdio.h>
+#include <linux/mmc/slot-gpio.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_gpio.h>
@@ -29,12 +30,22 @@
 #include "sdhci-pltfm.h"
 #include "sdhci-esdhc.h"
 
-#define	SDHCI_CTRL_D3CD			0x08
+#define	ESDHC_CTRL_D3CD			0x08
 /* VENDOR SPEC register */
-#define SDHCI_VENDOR_SPEC		0xC0
-#define  SDHCI_VENDOR_SPEC_SDIO_QUIRK	0x00000002
-#define SDHCI_WTMK_LVL			0x44
-#define SDHCI_MIX_CTRL			0x48
+#define ESDHC_VENDOR_SPEC		0xc0
+#define  ESDHC_VENDOR_SPEC_SDIO_QUIRK	(1 << 1)
+#define ESDHC_WTMK_LVL			0x44
+#define ESDHC_MIX_CTRL			0x48
+#define  ESDHC_MIX_CTRL_AC23EN		(1 << 7)
+/* Bits 3 and 6 are not SDHCI standard definitions */
+#define  ESDHC_MIX_CTRL_SDHCI_MASK	0xb7
+
+/*
+ * Our interpretation of the SDHCI_HOST_CONTROL register
+ */
+#define ESDHC_CTRL_4BITBUS		(0x1 << 1)
+#define ESDHC_CTRL_8BITBUS		(0x2 << 1)
+#define ESDHC_CTRL_BUSWIDTH_MASK	(0x3 << 1)
 
 /*
  * There is an INT DMA ERR mis-match between eSDHC and STD SDHC SPEC:
@@ -42,7 +53,7 @@
  * but bit28 is used as the INT DMA ERR in fsl eSDHC design.
  * Define this macro DMA error INT for fsl eSDHC
  */
-#define SDHCI_INT_VENDOR_SPEC_DMA_ERR	0x10000000
+#define ESDHC_INT_VENDOR_SPEC_DMA_ERR	(1 << 28)
 
 /*
  * The CMDTYPE of the CMD register (offset 0xE) should be set to
@@ -143,23 +154,8 @@ static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, i
 
 static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
 {
-	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-	struct pltfm_imx_data *imx_data = pltfm_host->priv;
-	struct esdhc_platform_data *boarddata = &imx_data->boarddata;
-
-	/* fake CARD_PRESENT flag */
 	u32 val = readl(host->ioaddr + reg);
 
-	if (unlikely((reg == SDHCI_PRESENT_STATE)
-			&& gpio_is_valid(boarddata->cd_gpio))) {
-		if (gpio_get_value(boarddata->cd_gpio))
-			/* no card, if a valid gpio says so... */
-			val &= ~SDHCI_CARD_PRESENT;
-		else
-			/* ... in all other cases assume card is present */
-			val |= SDHCI_CARD_PRESENT;
-	}
-
 	if (unlikely(reg == SDHCI_CAPABILITIES)) {
 		/* In FSL esdhc IC module, only bit20 is used to indicate the
 		 * ADMA2 capability of esdhc, but this bit is messed up on
@@ -175,8 +171,8 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
 	}
 
 	if (unlikely(reg == SDHCI_INT_STATUS)) {
-		if (val & SDHCI_INT_VENDOR_SPEC_DMA_ERR) {
-			val &= ~SDHCI_INT_VENDOR_SPEC_DMA_ERR;
+		if (val & ESDHC_INT_VENDOR_SPEC_DMA_ERR) {
+			val &= ~ESDHC_INT_VENDOR_SPEC_DMA_ERR;
 			val |= SDHCI_INT_ADMA_ERROR;
 		}
 	}
@@ -188,17 +184,9 @@ static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct pltfm_imx_data *imx_data = pltfm_host->priv;
-	struct esdhc_platform_data *boarddata = &imx_data->boarddata;
 	u32 data;
 
 	if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) {
-		if (boarddata->cd_type == ESDHC_CD_GPIO)
-			/*
-			 * These interrupts won't work with a custom
-			 * card_detect gpio (only applied to mx25/35)
-			 */
-			val &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
-
 		if (val & SDHCI_INT_CARD_INT) {
 			/*
 			 * Clear and then set D3CD bit to avoid missing the
@@ -209,9 +197,9 @@ static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
 			 * re-sample it by the following steps.
 			 */
 			data = readl(host->ioaddr + SDHCI_HOST_CONTROL);
-			data &= ~SDHCI_CTRL_D3CD;
+			data &= ~ESDHC_CTRL_D3CD;
 			writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
-			data |= SDHCI_CTRL_D3CD;
+			data |= ESDHC_CTRL_D3CD;
 			writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
 		}
 	}
@@ -220,15 +208,15 @@ static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
 				&& (reg == SDHCI_INT_STATUS)
 				&& (val & SDHCI_INT_DATA_END))) {
 			u32 v;
-			v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
-			v &= ~SDHCI_VENDOR_SPEC_SDIO_QUIRK;
-			writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
+			v = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
+			v &= ~ESDHC_VENDOR_SPEC_SDIO_QUIRK;
+			writel(v, host->ioaddr + ESDHC_VENDOR_SPEC);
 	}
 
 	if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) {
 		if (val & SDHCI_INT_ADMA_ERROR) {
 			val &= ~SDHCI_INT_ADMA_ERROR;
-			val |= SDHCI_INT_VENDOR_SPEC_DMA_ERR;
+			val |= ESDHC_INT_VENDOR_SPEC_DMA_ERR;
 		}
 	}
 
@@ -237,15 +225,18 @@ static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
 
 static u16 esdhc_readw_le(struct sdhci_host *host, int reg)
 {
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = pltfm_host->priv;
+
 	if (unlikely(reg == SDHCI_HOST_VERSION)) {
-		u16 val = readw(host->ioaddr + (reg ^ 2));
+		reg ^= 2;
+		if (is_imx6q_usdhc(imx_data)) {
 			/*
-		 * uSDHC supports SDHCI v3.0, but it's encoded as value
-		 * 0x3 in host controller version register, which violates
-		 * SDHCI_SPEC_300 definition.  Work it around here.
+			 * The usdhc register returns a wrong host version.
+			 * Correct it here.
 			 */
-		if ((val & SDHCI_SPEC_VER_MASK) == 3)
-			return --val;
+			return SDHCI_SPEC_300;
+		}
 	}
 
 	return readw(host->ioaddr + reg);
@@ -258,20 +249,32 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
 
 	switch (reg) {
 	case SDHCI_TRANSFER_MODE:
-		/*
-		 * Postpone this write, we must do it together with a
-		 * command write that is down below.
-		 */
 		if ((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
 				&& (host->cmd->opcode == SD_IO_RW_EXTENDED)
 				&& (host->cmd->data->blocks > 1)
 				&& (host->cmd->data->flags & MMC_DATA_READ)) {
 			u32 v;
-			v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
-			v |= SDHCI_VENDOR_SPEC_SDIO_QUIRK;
-			writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
+			v = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
+			v |= ESDHC_VENDOR_SPEC_SDIO_QUIRK;
+			writel(v, host->ioaddr + ESDHC_VENDOR_SPEC);
+		}
+
+		if (is_imx6q_usdhc(imx_data)) {
+			u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL);
+			/* Swap AC23 bit */
+			if (val & SDHCI_TRNS_AUTO_CMD23) {
+				val &= ~SDHCI_TRNS_AUTO_CMD23;
+				val |= ESDHC_MIX_CTRL_AC23EN;
 			}
+			m = val | (m & ~ESDHC_MIX_CTRL_SDHCI_MASK);
+			writel(m, host->ioaddr + ESDHC_MIX_CTRL);
+		} else {
+			/*
+			 * Postpone this write, we must do it together with a
+			 * command write that is down below.
+			 */
 			imx_data->scratchpad = val;
+		}
 		return;
 	case SDHCI_COMMAND:
 		if ((host->cmd->opcode == MMC_STOP_TRANSMISSION ||
@@ -279,16 +282,12 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
 	            (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
 			val |= SDHCI_CMD_ABORTCMD;
 
-		if (is_imx6q_usdhc(imx_data)) {
-			u32 m = readl(host->ioaddr + SDHCI_MIX_CTRL);
-			m = imx_data->scratchpad | (m & 0xffff0000);
-			writel(m, host->ioaddr + SDHCI_MIX_CTRL);
+		if (is_imx6q_usdhc(imx_data))
 			writel(val << 16,
 			       host->ioaddr + SDHCI_TRANSFER_MODE);
-		} else {
+		else
 			writel(val << 16 | imx_data->scratchpad,
 			       host->ioaddr + SDHCI_TRANSFER_MODE);
-		}
 		return;
 	case SDHCI_BLOCK_SIZE:
 		val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
@@ -302,6 +301,7 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct pltfm_imx_data *imx_data = pltfm_host->priv;
 	u32 new_val;
+	u32 mask;
 
 	switch (reg) {
 	case SDHCI_POWER_CONTROL:
@@ -311,10 +311,8 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
 		 */
 		return;
 	case SDHCI_HOST_CONTROL:
-		/* FSL messed up here, so we can just keep those three */
-		new_val = val & (SDHCI_CTRL_LED | \
-				SDHCI_CTRL_4BITBUS | \
-				SDHCI_CTRL_D3CD);
+		/* FSL messed up here, so we need to manually compose it. */
+		new_val = val & SDHCI_CTRL_LED;
 		/* ensure the endianness */
 		new_val |= ESDHC_HOST_CONTROL_LE;
 		/* bits 8&9 are reserved on mx25 */
@@ -323,7 +321,13 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
 			new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5;
 		}
 
-		esdhc_clrset_le(host, 0xffff, new_val, reg);
+		/*
+		 * Do not touch buswidth bits here. This is done in
+		 * esdhc_pltfm_bus_width.
+		 */
+		mask = 0xffff & ~ESDHC_CTRL_BUSWIDTH_MASK;
+
+		esdhc_clrset_le(host, mask, new_val, reg);
 		return;
 	}
 	esdhc_clrset_le(host, 0xff, val, reg);
@@ -336,15 +340,15 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
 	 * circuit relies on.  To work around it, we turn the clocks on back
 	 * to keep card detection circuit functional.
 	 */
-	if ((reg == SDHCI_SOFTWARE_RESET) && (val & 1))
+	if ((reg == SDHCI_SOFTWARE_RESET) && (val & 1)) {
 		esdhc_clrset_le(host, 0x7, 0x7, ESDHC_SYSTEM_CONTROL);
-}
-
-static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host)
-{
-	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-
-	return clk_get_rate(pltfm_host->clk);
+		/*
+		 * The reset on usdhc fails to clear MIX_CTRL register.
+		 * Do it manually here.
+		 */
+		if (is_imx6q_usdhc(imx_data))
+			writel(0, host->ioaddr + ESDHC_MIX_CTRL);
+	}
 }
 
 static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host)
@@ -362,8 +366,7 @@ static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)
 
 	switch (boarddata->wp_type) {
 	case ESDHC_WP_GPIO:
-		if (gpio_is_valid(boarddata->wp_gpio))
-			return gpio_get_value(boarddata->wp_gpio);
+		return mmc_gpio_get_ro(host->mmc);
 	case ESDHC_WP_CONTROLLER:
 		return !(readl(host->ioaddr + SDHCI_PRESENT_STATE) &
 			       SDHCI_WRITE_PROTECT);
@@ -374,6 +377,28 @@ static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)
 	return -ENOSYS;
 }
 
+static int esdhc_pltfm_bus_width(struct sdhci_host *host, int width)
+{
+	u32 ctrl;
+
+	switch (width) {
+	case MMC_BUS_WIDTH_8:
+		ctrl = ESDHC_CTRL_8BITBUS;
+		break;
+	case MMC_BUS_WIDTH_4:
+		ctrl = ESDHC_CTRL_4BITBUS;
+		break;
+	default:
+		ctrl = 0;
+		break;
+	}
+
+	esdhc_clrset_le(host, ESDHC_CTRL_BUSWIDTH_MASK, ctrl,
+			SDHCI_HOST_CONTROL);
+
+	return 0;
+}
+
 static struct sdhci_ops sdhci_esdhc_ops = {
 	.read_l = esdhc_readl_le,
 	.read_w = esdhc_readw_le,
@@ -381,9 +406,10 @@ static struct sdhci_ops sdhci_esdhc_ops = {
 	.write_w = esdhc_writew_le,
 	.write_b = esdhc_writeb_le,
 	.set_clock = esdhc_set_clock,
-	.get_max_clock = esdhc_pltfm_get_max_clock,
+	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
 	.get_min_clock = esdhc_pltfm_get_min_clock,
 	.get_ro = esdhc_pltfm_get_ro,
+	.platform_bus_width = esdhc_pltfm_bus_width,
 };
 
 static struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
@@ -394,14 +420,6 @@ static struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
 	.ops = &sdhci_esdhc_ops,
 };
 
-static irqreturn_t cd_irq(int irq, void *data)
-{
-	struct sdhci_host *sdhost = (struct sdhci_host *)data;
-
-	tasklet_schedule(&sdhost->card_tasklet);
-	return IRQ_HANDLED;
-};
-
 #ifdef CONFIG_OF
 static int
 sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
@@ -429,6 +447,8 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
 	if (gpio_is_valid(boarddata->wp_gpio))
 		boarddata->wp_type = ESDHC_WP_GPIO;
 
+	of_property_read_u32(np, "bus-width", &boarddata->max_bus_width);
+
 	return 0;
 }
 #else
@@ -512,7 +532,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 	 * to something insane.  Change it back here.
 	 */
 	if (is_imx6q_usdhc(imx_data))
-		writel(0x08100810, host->ioaddr + SDHCI_WTMK_LVL);
+		writel(0x08100810, host->ioaddr + ESDHC_WTMK_LVL);
 
 	boarddata = &imx_data->boarddata;
 	if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) {
@@ -527,37 +547,22 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 
 	/* write_protect */
 	if (boarddata->wp_type == ESDHC_WP_GPIO) {
-		err = devm_gpio_request_one(&pdev->dev, boarddata->wp_gpio,
-					    GPIOF_IN, "ESDHC_WP");
+		err = mmc_gpio_request_ro(host->mmc, boarddata->wp_gpio);
 		if (err) {
-			dev_warn(mmc_dev(host->mmc),
-				 "no write-protect pin available!\n");
-			boarddata->wp_gpio = -EINVAL;
+			dev_err(mmc_dev(host->mmc),
+				"failed to request write-protect gpio!\n");
+			goto disable_clk;
 		}
-	} else {
-		boarddata->wp_gpio = -EINVAL;
+		host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
 	}
 
 	/* card_detect */
-	if (boarddata->cd_type != ESDHC_CD_GPIO)
-		boarddata->cd_gpio = -EINVAL;
-
 	switch (boarddata->cd_type) {
 	case ESDHC_CD_GPIO:
-		err = devm_gpio_request_one(&pdev->dev, boarddata->cd_gpio,
-					    GPIOF_IN, "ESDHC_CD");
+		err = mmc_gpio_request_cd(host->mmc, boarddata->cd_gpio);
 		if (err) {
 			dev_err(mmc_dev(host->mmc),
-				"no card-detect pin available!\n");
-			goto disable_clk;
-		}
-
-		err = devm_request_irq(&pdev->dev,
-				 gpio_to_irq(boarddata->cd_gpio), cd_irq,
-				 IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-				 mmc_hostname(host->mmc), host);
-		if (err) {
-			dev_err(mmc_dev(host->mmc), "request irq error\n");
+				"failed to request card-detect gpio!\n");
 			goto disable_clk;
 		}
 		/* fall through */
@@ -575,6 +580,19 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 		break;
 	}
 
+	switch (boarddata->max_bus_width) {
+	case 8:
+		host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA;
+		break;
+	case 4:
+		host->mmc->caps |= MMC_CAP_4_BIT_DATA;
+		break;
+	case 1:
+	default:
+		host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
+		break;
+	}
+
 	err = sdhci_add_host(host);
 	if (err)
 		goto disable_clk;

drivers/mmc/host/sdhci-pci.c

@@ -935,7 +935,7 @@ static int sdhci_pci_enable_dma(struct sdhci_host *host)
 	return 0;
 }
 
-static int sdhci_pci_8bit_width(struct sdhci_host *host, int width)
+static int sdhci_pci_bus_width(struct sdhci_host *host, int width)
 {
 	u8 ctrl;
 
@@ -977,7 +977,7 @@ static void sdhci_pci_hw_reset(struct sdhci_host *host)
 
 static struct sdhci_ops sdhci_pci_ops = {
 	.enable_dma	= sdhci_pci_enable_dma,
-	.platform_8bit_width	= sdhci_pci_8bit_width,
+	.platform_bus_width	= sdhci_pci_bus_width,
 	.hw_reset		= sdhci_pci_hw_reset,
 };
 

drivers/mmc/host/sdhci-pltfm.c

@@ -36,6 +36,14 @@
 #endif
 #include "sdhci-pltfm.h"
 
+unsigned int sdhci_pltfm_clk_get_max_clock(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+	return clk_get_rate(pltfm_host->clk);
+}
+EXPORT_SYMBOL_GPL(sdhci_pltfm_clk_get_max_clock);
+
 static struct sdhci_ops sdhci_pltfm_ops = {
 };
 

drivers/mmc/host/sdhci-pltfm.h

@@ -98,6 +98,8 @@ extern int sdhci_pltfm_register(struct platform_device *pdev,
 				struct sdhci_pltfm_data *pdata);
 extern int sdhci_pltfm_unregister(struct platform_device *pdev);
 
+extern unsigned int sdhci_pltfm_clk_get_max_clock(struct sdhci_host *host);
+
 #ifdef CONFIG_PM
 extern const struct dev_pm_ops sdhci_pltfm_pmops;
 #define SDHCI_PLTFM_PMOPS (&sdhci_pltfm_pmops)

drivers/mmc/host/sdhci-pxav2.c

@@ -111,17 +111,10 @@ static int pxav2_mmc_set_width(struct sdhci_host *host, int width)
 	return 0;
 }
 
-static u32 pxav2_get_max_clock(struct sdhci_host *host)
-{
-	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-
-	return clk_get_rate(pltfm_host->clk);
-}
-
 static struct sdhci_ops pxav2_sdhci_ops = {
-	.get_max_clock = pxav2_get_max_clock,
+	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
 	.platform_reset_exit = pxav2_set_private_registers,
-	.platform_8bit_width = pxav2_mmc_set_width,
+	.platform_bus_width = pxav2_mmc_set_width,
 };
 
 #ifdef CONFIG_OF

drivers/mmc/host/sdhci-pxav3.c

@@ -32,10 +32,14 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_gpio.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
 
 #include "sdhci.h"
 #include "sdhci-pltfm.h"
 
+#define PXAV3_RPM_DELAY_MS     50
+
 #define SD_CLOCK_BURST_SIZE_SETUP		0x10A
 #define SDCLK_SEL	0x100
 #define SDCLK_DELAY_SHIFT	9
@@ -163,18 +167,11 @@ static int pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
 	return 0;
 }
 
-static u32 pxav3_get_max_clock(struct sdhci_host *host)
-{
-	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-
-	return clk_get_rate(pltfm_host->clk);
-}
-
 static struct sdhci_ops pxav3_sdhci_ops = {
 	.platform_reset_exit = pxav3_set_private_registers,
 	.set_uhs_signaling = pxav3_set_uhs_signaling,
 	.platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
-	.get_max_clock = pxav3_get_max_clock,
+	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
 };
 
 #ifdef CONFIG_OF
@@ -303,20 +300,37 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
 
 	sdhci_get_of_property(pdev);
 
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, PXAV3_RPM_DELAY_MS);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_suspend_ignore_children(&pdev->dev, 1);
+	pm_runtime_get_noresume(&pdev->dev);
+
 	ret = sdhci_add_host(host);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add host\n");
+		pm_runtime_forbid(&pdev->dev);
+		pm_runtime_disable(&pdev->dev);
 		goto err_add_host;
 	}
 
 	platform_set_drvdata(pdev, host);
 
+	if (pdata->pm_caps & MMC_PM_KEEP_POWER) {
+		device_init_wakeup(&pdev->dev, 1);
+		host->mmc->pm_flags |= MMC_PM_WAKE_SDIO_IRQ;
+	} else {
+		device_init_wakeup(&pdev->dev, 0);
+	}
+
+	pm_runtime_put_autosuspend(&pdev->dev);
+
 	return 0;
 
 err_add_host:
 	clk_disable_unprepare(clk);
 	clk_put(clk);
-	mmc_gpio_free_cd(host->mmc);
 err_cd_req:
 err_clk_get:
 	sdhci_pltfm_free(pdev);
@@ -329,16 +343,14 @@ static int sdhci_pxav3_remove(struct platform_device *pdev)
 	struct sdhci_host *host = platform_get_drvdata(pdev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_pxa *pxa = pltfm_host->priv;
-	struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
 
+	pm_runtime_get_sync(&pdev->dev);
 	sdhci_remove_host(host, 1);
+	pm_runtime_disable(&pdev->dev);
 
 	clk_disable_unprepare(pltfm_host->clk);
 	clk_put(pltfm_host->clk);
 
-	if (gpio_is_valid(pdata->ext_cd_gpio))
-		mmc_gpio_free_cd(host->mmc);
-
 	sdhci_pltfm_free(pdev);
 	kfree(pxa);
 
@@ -347,6 +359,83 @@ static int sdhci_pxav3_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int sdhci_pxav3_suspend(struct device *dev)
+{
+	int ret;
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	pm_runtime_get_sync(dev);
+	ret = sdhci_suspend_host(host);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return ret;
+}
+
+static int sdhci_pxav3_resume(struct device *dev)
+{
+	int ret;
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	pm_runtime_get_sync(dev);
+	ret = sdhci_resume_host(host);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return ret;
+}
+#endif
+
+#ifdef CONFIG_PM_RUNTIME
+static int sdhci_pxav3_runtime_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	unsigned long flags;
+
+	if (pltfm_host->clk) {
+		spin_lock_irqsave(&host->lock, flags);
+		host->runtime_suspended = true;
+		spin_unlock_irqrestore(&host->lock, flags);
+
+		clk_disable_unprepare(pltfm_host->clk);
+	}
+
+	return 0;
+}
+
+static int sdhci_pxav3_runtime_resume(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	unsigned long flags;
+
+	if (pltfm_host->clk) {
+		clk_prepare_enable(pltfm_host->clk);
+
+		spin_lock_irqsave(&host->lock, flags);
+		host->runtime_suspended = false;
+		spin_unlock_irqrestore(&host->lock, flags);
+	}
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PM
+static const struct dev_pm_ops sdhci_pxav3_pmops = {
+	SET_SYSTEM_SLEEP_PM_OPS(sdhci_pxav3_suspend, sdhci_pxav3_resume)
+	SET_RUNTIME_PM_OPS(sdhci_pxav3_runtime_suspend,
+		sdhci_pxav3_runtime_resume, NULL)
+};
+
+#define SDHCI_PXAV3_PMOPS (&sdhci_pxav3_pmops)
+
+#else
+#define SDHCI_PXAV3_PMOPS NULL
+#endif
+
 static struct platform_driver sdhci_pxav3_driver = {
 	.driver		= {
 		.name	= "sdhci-pxav3",
@@ -354,7 +443,7 @@ static struct platform_driver sdhci_pxav3_driver = {
 		.of_match_table = sdhci_pxav3_of_match,
 #endif
 		.owner	= THIS_MODULE,
-		.pm	= SDHCI_PLTFM_PMOPS,
+		.pm	= SDHCI_PXAV3_PMOPS,
 	},
 	.probe		= sdhci_pxav3_probe,
 	.remove		= sdhci_pxav3_remove,

drivers/mmc/host/sdhci-s3c.c

@@ -332,14 +332,14 @@ static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
 }
 
 /**
- * sdhci_s3c_platform_8bit_width - support 8bit buswidth
+ * sdhci_s3c_platform_bus_width - support 8bit buswidth
  * @host: The SDHCI host being queried
  * @width: MMC_BUS_WIDTH_ macro for the bus width being requested
  *
  * We have 8-bit width support but is not a v3 controller.
- * So we add platform_8bit_width() and support 8bit width.
+ * So we add platform_bus_width() and support 8bit width.
  */
-static int sdhci_s3c_platform_8bit_width(struct sdhci_host *host, int width)
+static int sdhci_s3c_platform_bus_width(struct sdhci_host *host, int width)
 {
 	u8 ctrl;
 
@@ -369,7 +369,7 @@ static struct sdhci_ops sdhci_s3c_ops = {
 	.get_max_clock		= sdhci_s3c_get_max_clk,
 	.set_clock		= sdhci_s3c_set_clock,
 	.get_min_clock		= sdhci_s3c_get_min_clock,
-	.platform_8bit_width	= sdhci_s3c_platform_8bit_width,
+	.platform_bus_width	= sdhci_s3c_platform_bus_width,
 };
 
 static void sdhci_s3c_notify_change(struct platform_device *dev, int state)

drivers/mmc/host/sdhci-tegra.c

@@ -27,8 +27,6 @@
 
 #include <asm/gpio.h>
 
-#include <linux/platform_data/mmc-sdhci-tegra.h>
-
 #include "sdhci-pltfm.h"
 
 /* Tegra SDHOST controller vendor register definitions */
@@ -45,8 +43,11 @@ struct sdhci_tegra_soc_data {
 };
 
 struct sdhci_tegra {
-	const struct tegra_sdhci_platform_data *plat;
 	const struct sdhci_tegra_soc_data *soc_data;
+	int cd_gpio;
+	int wp_gpio;
+	int power_gpio;
+	int is_8bit;
 };
 
 static u32 tegra_sdhci_readl(struct sdhci_host *host, int reg)
@@ -108,12 +109,11 @@ static unsigned int tegra_sdhci_get_ro(struct sdhci_host *host)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_tegra *tegra_host = pltfm_host->priv;
-	const struct tegra_sdhci_platform_data *plat = tegra_host->plat;
 
-	if (!gpio_is_valid(plat->wp_gpio))
+	if (!gpio_is_valid(tegra_host->wp_gpio))
 		return -1;
 
-	return gpio_get_value(plat->wp_gpio);
+	return gpio_get_value(tegra_host->wp_gpio);
 }
 
 static irqreturn_t carddetect_irq(int irq, void *data)
@@ -143,15 +143,14 @@ static void tegra_sdhci_reset_exit(struct sdhci_host *host, u8 mask)
 	}
 }
 
-static int tegra_sdhci_8bit(struct sdhci_host *host, int bus_width)
+static int tegra_sdhci_buswidth(struct sdhci_host *host, int bus_width)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_tegra *tegra_host = pltfm_host->priv;
-	const struct tegra_sdhci_platform_data *plat = tegra_host->plat;
 	u32 ctrl;
 
 	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
-	if (plat->is_8bit && bus_width == MMC_BUS_WIDTH_8) {
+	if (tegra_host->is_8bit && bus_width == MMC_BUS_WIDTH_8) {
 		ctrl &= ~SDHCI_CTRL_4BITBUS;
 		ctrl |= SDHCI_CTRL_8BITBUS;
 	} else {
@@ -170,7 +169,7 @@ static struct sdhci_ops tegra_sdhci_ops = {
 	.read_l     = tegra_sdhci_readl,
 	.read_w     = tegra_sdhci_readw,
 	.write_l    = tegra_sdhci_writel,
-	.platform_8bit_width = tegra_sdhci_8bit,
+	.platform_bus_width = tegra_sdhci_buswidth,
 	.platform_reset_exit = tegra_sdhci_reset_exit,
 };
 
@@ -217,31 +216,19 @@ static const struct of_device_id sdhci_tegra_dt_match[] = {
 };
 MODULE_DEVICE_TABLE(of, sdhci_dt_ids);
 
-static struct tegra_sdhci_platform_data *sdhci_tegra_dt_parse_pdata(
-						struct platform_device *pdev)
+static void sdhci_tegra_parse_dt(struct device *dev,
+					struct sdhci_tegra *tegra_host)
 {
-	struct tegra_sdhci_platform_data *plat;
-	struct device_node *np = pdev->dev.of_node;
+	struct device_node *np = dev->of_node;
 	u32 bus_width;
 
-	if (!np)
-		return NULL;
-
-	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
-	if (!plat) {
-		dev_err(&pdev->dev, "Can't allocate platform data\n");
-		return NULL;
-	}
-
-	plat->cd_gpio = of_get_named_gpio(np, "cd-gpios", 0);
-	plat->wp_gpio = of_get_named_gpio(np, "wp-gpios", 0);
-	plat->power_gpio = of_get_named_gpio(np, "power-gpios", 0);
+	tegra_host->cd_gpio = of_get_named_gpio(np, "cd-gpios", 0);
+	tegra_host->wp_gpio = of_get_named_gpio(np, "wp-gpios", 0);
+	tegra_host->power_gpio = of_get_named_gpio(np, "power-gpios", 0);
 
 	if (of_property_read_u32(np, "bus-width", &bus_width) == 0 &&
 	    bus_width == 8)
-		plat->is_8bit = 1;
-
-	return plat;
+		tegra_host->is_8bit = 1;
 }
 
 static int sdhci_tegra_probe(struct platform_device *pdev)
@@ -250,7 +237,6 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
 	const struct sdhci_tegra_soc_data *soc_data;
 	struct sdhci_host *host;
 	struct sdhci_pltfm_host *pltfm_host;
-	struct tegra_sdhci_platform_data *plat;
 	struct sdhci_tegra *tegra_host;
 	struct clk *clk;
 	int rc;
@@ -263,52 +249,40 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
 	host = sdhci_pltfm_init(pdev, soc_data->pdata);
 	if (IS_ERR(host))
 		return PTR_ERR(host);
-
 	pltfm_host = sdhci_priv(host);
 
-	plat = pdev->dev.platform_data;
-
-	if (plat == NULL)
-		plat = sdhci_tegra_dt_parse_pdata(pdev);
-
-	if (plat == NULL) {
-		dev_err(mmc_dev(host->mmc), "missing platform data\n");
-		rc = -ENXIO;
-		goto err_no_plat;
-	}
-
 	tegra_host = devm_kzalloc(&pdev->dev, sizeof(*tegra_host), GFP_KERNEL);
 	if (!tegra_host) {
 		dev_err(mmc_dev(host->mmc), "failed to allocate tegra_host\n");
 		rc = -ENOMEM;
-		goto err_no_plat;
+		goto err_alloc_tegra_host;
 	}
-
-	tegra_host->plat = plat;
 	tegra_host->soc_data = soc_data;
-
 	pltfm_host->priv = tegra_host;
 
-	if (gpio_is_valid(plat->power_gpio)) {
-		rc = gpio_request(plat->power_gpio, "sdhci_power");
+	sdhci_tegra_parse_dt(&pdev->dev, tegra_host);
+
+	if (gpio_is_valid(tegra_host->power_gpio)) {
+		rc = gpio_request(tegra_host->power_gpio, "sdhci_power");
 		if (rc) {
 			dev_err(mmc_dev(host->mmc),
 				"failed to allocate power gpio\n");
 			goto err_power_req;
 		}
-		gpio_direction_output(plat->power_gpio, 1);
+		gpio_direction_output(tegra_host->power_gpio, 1);
 	}
 
-	if (gpio_is_valid(plat->cd_gpio)) {
-		rc = gpio_request(plat->cd_gpio, "sdhci_cd");
+	if (gpio_is_valid(tegra_host->cd_gpio)) {
+		rc = gpio_request(tegra_host->cd_gpio, "sdhci_cd");
 		if (rc) {
 			dev_err(mmc_dev(host->mmc),
 				"failed to allocate cd gpio\n");
 			goto err_cd_req;
 		}
-		gpio_direction_input(plat->cd_gpio);
+		gpio_direction_input(tegra_host->cd_gpio);
 
-		rc = request_irq(gpio_to_irq(plat->cd_gpio), carddetect_irq,
+		rc = request_irq(gpio_to_irq(tegra_host->cd_gpio),
+				 carddetect_irq,
 				 IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
 				 mmc_hostname(host->mmc), host);
 
@@ -319,14 +293,14 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
 
 	}
 
-	if (gpio_is_valid(plat->wp_gpio)) {
-		rc = gpio_request(plat->wp_gpio, "sdhci_wp");
+	if (gpio_is_valid(tegra_host->wp_gpio)) {
+		rc = gpio_request(tegra_host->wp_gpio, "sdhci_wp");
 		if (rc) {
 			dev_err(mmc_dev(host->mmc),
 				"failed to allocate wp gpio\n");
 			goto err_wp_req;
 		}
-		gpio_direction_input(plat->wp_gpio);
+		gpio_direction_input(tegra_host->wp_gpio);
 	}
 
 	clk = clk_get(mmc_dev(host->mmc), NULL);
@@ -338,9 +312,7 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
 	clk_prepare_enable(clk);
 	pltfm_host->clk = clk;
 
-	host->mmc->pm_caps = plat->pm_flags;
-
-	if (plat->is_8bit)
+	if (tegra_host->is_8bit)
 		host->mmc->caps |= MMC_CAP_8_BIT_DATA;
 
 	rc = sdhci_add_host(host);
@@ -353,19 +325,19 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
 	clk_disable_unprepare(pltfm_host->clk);
 	clk_put(pltfm_host->clk);
 err_clk_get:
-	if (gpio_is_valid(plat->wp_gpio))
-		gpio_free(plat->wp_gpio);
+	if (gpio_is_valid(tegra_host->wp_gpio))
+		gpio_free(tegra_host->wp_gpio);
 err_wp_req:
-	if (gpio_is_valid(plat->cd_gpio))
-		free_irq(gpio_to_irq(plat->cd_gpio), host);
+	if (gpio_is_valid(tegra_host->cd_gpio))
+		free_irq(gpio_to_irq(tegra_host->cd_gpio), host);
 err_cd_irq_req:
-	if (gpio_is_valid(plat->cd_gpio))
-		gpio_free(plat->cd_gpio);
+	if (gpio_is_valid(tegra_host->cd_gpio))
+		gpio_free(tegra_host->cd_gpio);
 err_cd_req:
-	if (gpio_is_valid(plat->power_gpio))
-		gpio_free(plat->power_gpio);
+	if (gpio_is_valid(tegra_host->power_gpio))
+		gpio_free(tegra_host->power_gpio);
 err_power_req:
-err_no_plat:
+err_alloc_tegra_host:
 	sdhci_pltfm_free(pdev);
 	return rc;
 }
@@ -375,21 +347,20 @@ static int sdhci_tegra_remove(struct platform_device *pdev)
 	struct sdhci_host *host = platform_get_drvdata(pdev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_tegra *tegra_host = pltfm_host->priv;
-	const struct tegra_sdhci_platform_data *plat = tegra_host->plat;
 	int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
 
 	sdhci_remove_host(host, dead);
 
-	if (gpio_is_valid(plat->wp_gpio))
-		gpio_free(plat->wp_gpio);
+	if (gpio_is_valid(tegra_host->wp_gpio))
+		gpio_free(tegra_host->wp_gpio);
 
-	if (gpio_is_valid(plat->cd_gpio)) {
-		free_irq(gpio_to_irq(plat->cd_gpio), host);
-		gpio_free(plat->cd_gpio);
+	if (gpio_is_valid(tegra_host->cd_gpio)) {
+		free_irq(gpio_to_irq(tegra_host->cd_gpio), host);
+		gpio_free(tegra_host->cd_gpio);
 	}
 
-	if (gpio_is_valid(plat->power_gpio))
-		gpio_free(plat->power_gpio);
+	if (gpio_is_valid(tegra_host->power_gpio))
+		gpio_free(tegra_host->power_gpio);
 
 	clk_disable_unprepare(pltfm_host->clk);
 	clk_put(pltfm_host->clk);

drivers/mmc/host/sdhci.c

@@ -53,6 +53,7 @@ static void sdhci_send_command(struct sdhci_host *, struct mmc_command *);
 static void sdhci_finish_command(struct sdhci_host *);
 static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
 static void sdhci_tuning_timer(unsigned long data);
+static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
 
 #ifdef CONFIG_PM_RUNTIME
 static int sdhci_runtime_pm_get(struct sdhci_host *host);
@@ -1082,6 +1083,37 @@ static void sdhci_finish_command(struct sdhci_host *host)
 	}
 }
 
+static u16 sdhci_get_preset_value(struct sdhci_host *host)
+{
+	u16 ctrl, preset = 0;
+
+	ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+
+	switch (ctrl & SDHCI_CTRL_UHS_MASK) {
+	case SDHCI_CTRL_UHS_SDR12:
+		preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12);
+		break;
+	case SDHCI_CTRL_UHS_SDR25:
+		preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR25);
+		break;
+	case SDHCI_CTRL_UHS_SDR50:
+		preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR50);
+		break;
+	case SDHCI_CTRL_UHS_SDR104:
+		preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR104);
+		break;
+	case SDHCI_CTRL_UHS_DDR50:
+		preset = sdhci_readw(host, SDHCI_PRESET_FOR_DDR50);
+		break;
+	default:
+		pr_warn("%s: Invalid UHS-I mode selected\n",
+			mmc_hostname(host->mmc));
+		preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12);
+		break;
+	}
+	return preset;
+}
+
 static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 {
 	int div = 0; /* Initialized for compiler warning */
@@ -1106,24 +1138,33 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 		goto out;
 
 	if (host->version >= SDHCI_SPEC_300) {
+		if (sdhci_readw(host, SDHCI_HOST_CONTROL2) &
+			SDHCI_CTRL_PRESET_VAL_ENABLE) {
+			u16 pre_val;
+
+			clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+			pre_val = sdhci_get_preset_value(host);
+			div = (pre_val & SDHCI_PRESET_SDCLK_FREQ_MASK)
+				>> SDHCI_PRESET_SDCLK_FREQ_SHIFT;
+			if (host->clk_mul &&
+				(pre_val & SDHCI_PRESET_CLKGEN_SEL_MASK)) {
+				clk = SDHCI_PROG_CLOCK_MODE;
+				real_div = div + 1;
+				clk_mul = host->clk_mul;
+			} else {
+				real_div = max_t(int, 1, div << 1);
+			}
+			goto clock_set;
+		}
+
 		/*
 		 * Check if the Host Controller supports Programmable Clock
 		 * Mode.
 		 */
 		if (host->clk_mul) {
-			u16 ctrl;
-
-			/*
-			 * We need to figure out whether the Host Driver needs
-			 * to select Programmable Clock Mode, or the value can
-			 * be set automatically by the Host Controller based on
-			 * the Preset Value registers.
-			 */
-			ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-			if (!(ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
 			for (div = 1; div <= 1024; div++) {
-					if (((host->max_clk * host->clk_mul) /
-					      div) <= clock)
+				if ((host->max_clk * host->clk_mul / div)
+					<= clock)
 					break;
 			}
 			/*
@@ -1134,7 +1175,6 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 			real_div = div;
 			clk_mul = host->clk_mul;
 			div--;
-			}
 		} else {
 			/* Version 3.00 divisors must be a multiple of 2. */
 			if (host->max_clk <= clock)
@@ -1159,6 +1199,7 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 		div >>= 1;
 	}
 
+clock_set:
 	if (real_div)
 		host->mmc->actual_clock = (host->max_clk * clk_mul) / real_div;
 
@@ -1189,6 +1230,15 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 	host->clock = clock;
 }
 
+static inline void sdhci_update_clock(struct sdhci_host *host)
+{
+	unsigned int clock;
+
+	clock = host->clock;
+	host->clock = 0;
+	sdhci_set_clock(host, clock);
+}
+
 static int sdhci_set_power(struct sdhci_host *host, unsigned short power)
 {
 	u8 pwr = 0;
@@ -1258,7 +1308,7 @@ static int sdhci_set_power(struct sdhci_host *host, unsigned short power)
 static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 {
 	struct sdhci_host *host;
-	bool present;
+	int present;
 	unsigned long flags;
 	u32 tuning_opcode;
 
@@ -1287,18 +1337,21 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 
 	host->mrq = mrq;
 
+	/*
+	 * Firstly check card presence from cd-gpio.  The return could
+	 * be one of the following possibilities:
+	 *     negative: cd-gpio is not available
+	 *     zero: cd-gpio is used, and card is removed
+	 *     one: cd-gpio is used, and card is present
+	 */
+	present = mmc_gpio_get_cd(host->mmc);
+	if (present < 0) {
 		/* If polling, assume that the card is always present. */
 		if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
-		present = true;
+			present = 1;
 		else
 			present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
 					SDHCI_CARD_PRESENT;
-
-	/* If we're using a cd-gpio, testing the presence bit might fail. */
-	if (!present) {
-		int ret = mmc_gpio_get_cd(host->mmc);
-		if (ret > 0)
-			present = true;
 	}
 
 	if (!present || host->flags & SDHCI_DEVICE_DEAD) {
@@ -1364,6 +1417,10 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 		sdhci_reinit(host);
 	}
 
+	if (host->version >= SDHCI_SPEC_300 &&
+		(ios->power_mode == MMC_POWER_UP))
+		sdhci_enable_preset_value(host, false);
+
 	sdhci_set_clock(host, ios->clock);
 
 	if (ios->power_mode == MMC_POWER_OFF)
@@ -1383,11 +1440,11 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 	/*
 	 * If your platform has 8-bit width support but is not a v3 controller,
 	 * or if it requires special setup code, you should implement that in
-	 * platform_8bit_width().
+	 * platform_bus_width().
 	 */
-	if (host->ops->platform_8bit_width)
-		host->ops->platform_8bit_width(host, ios->bus_width);
-	else {
+	if (host->ops->platform_bus_width) {
+		host->ops->platform_bus_width(host, ios->bus_width);
+	} else {
 		ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
 		if (ios->bus_width == MMC_BUS_WIDTH_8) {
 			ctrl &= ~SDHCI_CTRL_4BITBUS;
@@ -1415,7 +1472,6 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 
 	if (host->version >= SDHCI_SPEC_300) {
 		u16 clk, ctrl_2;
-		unsigned int clock;
 
 		/* In case of UHS-I modes, set High Speed Enable */
 		if ((ios->timing == MMC_TIMING_MMC_HS200) ||
@@ -1455,9 +1511,7 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 			sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
 
 			/* Re-enable SD Clock */
-			clock = host->clock;
-			host->clock = 0;
-			sdhci_set_clock(host, clock);
+			sdhci_update_clock(host);
 		}
 
 
@@ -1487,10 +1541,22 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 			sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
 		}
 
+		if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN) &&
+				((ios->timing == MMC_TIMING_UHS_SDR12) ||
+				 (ios->timing == MMC_TIMING_UHS_SDR25) ||
+				 (ios->timing == MMC_TIMING_UHS_SDR50) ||
+				 (ios->timing == MMC_TIMING_UHS_SDR104) ||
+				 (ios->timing == MMC_TIMING_UHS_DDR50))) {
+			u16 preset;
+
+			sdhci_enable_preset_value(host, true);
+			preset = sdhci_get_preset_value(host);
+			ios->drv_type = (preset & SDHCI_PRESET_DRV_MASK)
+				>> SDHCI_PRESET_DRV_SHIFT;
+		}
+
 		/* Re-enable SD Clock */
-		clock = host->clock;
-		host->clock = 0;
-		sdhci_set_clock(host, clock);
+		sdhci_update_clock(host);
 	} else
 		sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
 
@@ -1608,11 +1674,23 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
 	spin_unlock_irqrestore(&host->lock, flags);
 }
 
-static int sdhci_do_3_3v_signal_voltage_switch(struct sdhci_host *host,
-						u16 ctrl)
+static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
+						struct mmc_ios *ios)
 {
+	u16 ctrl;
 	int ret;
 
+	/*
+	 * Signal Voltage Switching is only applicable for Host Controllers
+	 * v3.00 and above.
+	 */
+	if (host->version < SDHCI_SPEC_300)
+		return 0;
+
+	ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+
+	switch (ios->signal_voltage) {
+	case MMC_SIGNAL_VOLTAGE_330:
 		/* Set 1.8V Signal Enable in the Host Control2 register to 0 */
 		ctrl &= ~SDHCI_CTRL_VDD_180;
 		sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
@@ -1636,113 +1714,51 @@ static int sdhci_do_3_3v_signal_voltage_switch(struct sdhci_host *host,
 		pr_warning("%s: 3.3V regulator output did not became stable\n",
 				mmc_hostname(host->mmc));
 
+		return -EAGAIN;
+	case MMC_SIGNAL_VOLTAGE_180:
+		if (host->vqmmc) {
+			ret = regulator_set_voltage(host->vqmmc,
+					1700000, 1950000);
+			if (ret) {
+				pr_warning("%s: Switching to 1.8V signalling voltage "
+						" failed\n", mmc_hostname(host->mmc));
 				return -EIO;
-}
-
-static int sdhci_do_1_8v_signal_voltage_switch(struct sdhci_host *host,
-						u16 ctrl)
-{
-	u8 pwr;
-	u16 clk;
-	u32 present_state;
-	int ret;
-
-	/* Stop SDCLK */
-	clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
-	clk &= ~SDHCI_CLOCK_CARD_EN;
-	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+			}
+		}
 
-	/* Check whether DAT[3:0] is 0000 */
-	present_state = sdhci_readl(host, SDHCI_PRESENT_STATE);
-	if (!((present_state & SDHCI_DATA_LVL_MASK) >>
-	       SDHCI_DATA_LVL_SHIFT)) {
 		/*
 		 * Enable 1.8V Signal Enable in the Host Control2
 		 * register
 		 */
-		if (host->vqmmc)
-			ret = regulator_set_voltage(host->vqmmc,
-				1700000, 1950000);
-		else
-			ret = 0;
-
-		if (!ret) {
 		ctrl |= SDHCI_CTRL_VDD_180;
 		sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
 
 		/* Wait for 5ms */
 		usleep_range(5000, 5500);
 
+		/* 1.8V regulator output should be stable within 5 ms */
 		ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-			if (ctrl & SDHCI_CTRL_VDD_180) {
-				/* Provide SDCLK again and wait for 1ms */
-				clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
-				clk |= SDHCI_CLOCK_CARD_EN;
-				sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
-				usleep_range(1000, 1500);
-
-				/*
-				 * If DAT[3:0] level is 1111b, then the card
-				 * was successfully switched to 1.8V signaling.
-				 */
-				present_state = sdhci_readl(host,
-							SDHCI_PRESENT_STATE);
-				if ((present_state & SDHCI_DATA_LVL_MASK) ==
-				     SDHCI_DATA_LVL_MASK)
+		if (ctrl & SDHCI_CTRL_VDD_180)
 			return 0;
-			}
-		}
-	}
 
-	/*
-	 * If we are here, that means the switch to 1.8V signaling
-	 * failed. We power cycle the card, and retry initialization
-	 * sequence by setting S18R to 0.
-	 */
-	pwr = sdhci_readb(host, SDHCI_POWER_CONTROL);
-	pwr &= ~SDHCI_POWER_ON;
-	sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
-	if (host->vmmc)
-		regulator_disable(host->vmmc);
-
-	/* Wait for 1ms as per the spec */
-	usleep_range(1000, 1500);
-	pwr |= SDHCI_POWER_ON;
-	sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
-	if (host->vmmc)
-		regulator_enable(host->vmmc);
-
-	pr_warning("%s: Switching to 1.8V signalling voltage failed, "
-		   "retrying with S18R set to 0\n", mmc_hostname(host->mmc));
+		pr_warning("%s: 1.8V regulator output did not became stable\n",
+				mmc_hostname(host->mmc));
 
 		return -EAGAIN;
-}
-
-static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
-						struct mmc_ios *ios)
-{
-	u16 ctrl;
-
-	/*
-	 * Signal Voltage Switching is only applicable for Host Controllers
-	 * v3.00 and above.
-	 */
-	if (host->version < SDHCI_SPEC_300)
+	case MMC_SIGNAL_VOLTAGE_120:
+		if (host->vqmmc) {
+			ret = regulator_set_voltage(host->vqmmc, 1100000, 1300000);
+			if (ret) {
+				pr_warning("%s: Switching to 1.2V signalling voltage "
+						" failed\n", mmc_hostname(host->mmc));
+				return -EIO;
+			}
+		}
 		return 0;
-
-	/*
-	 * We first check whether the request is to set signalling voltage
-	 * to 3.3V. If so, we change the voltage to 3.3V and return quickly.
-	 */
-	ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-	if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
-		return sdhci_do_3_3v_signal_voltage_switch(host, ctrl);
-	else if (!(ctrl & SDHCI_CTRL_VDD_180) &&
-			(ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180))
-		return sdhci_do_1_8v_signal_voltage_switch(host, ctrl);
-	else
+	default:
 		/* No signal voltage switch required */
 		return 0;
+	}
 }
 
 static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
@@ -1759,6 +1775,19 @@ static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
 	return err;
 }
 
+static int sdhci_card_busy(struct mmc_host *mmc)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	u32 present_state;
+
+	sdhci_runtime_pm_get(host);
+	/* Check whether DAT[3:0] is 0000 */
+	present_state = sdhci_readl(host, SDHCI_PRESENT_STATE);
+	sdhci_runtime_pm_put(host);
+
+	return !(present_state & SDHCI_DATA_LVL_MASK);
+}
+
 static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 {
 	struct sdhci_host *host;
@@ -1955,17 +1984,15 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	return err;
 }
 
-static void sdhci_do_enable_preset_value(struct sdhci_host *host, bool enable)
+
+static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
 {
 	u16 ctrl;
-	unsigned long flags;
 
 	/* Host Controller v3.00 defines preset value registers */
 	if (host->version < SDHCI_SPEC_300)
 		return;
 
-	spin_lock_irqsave(&host->lock, flags);
-
 	ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
 
 	/*
@@ -1981,17 +2008,6 @@ static void sdhci_do_enable_preset_value(struct sdhci_host *host, bool enable)
 		sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
 		host->flags &= ~SDHCI_PV_ENABLED;
 	}
-
-	spin_unlock_irqrestore(&host->lock, flags);
-}
-
-static void sdhci_enable_preset_value(struct mmc_host *mmc, bool enable)
-{
-	struct sdhci_host *host = mmc_priv(mmc);
-
-	sdhci_runtime_pm_get(host);
-	sdhci_do_enable_preset_value(host, enable);
-	sdhci_runtime_pm_put(host);
 }
 
 static void sdhci_card_event(struct mmc_host *mmc)
@@ -2027,8 +2043,8 @@ static const struct mmc_host_ops sdhci_ops = {
 	.enable_sdio_irq = sdhci_enable_sdio_irq,
 	.start_signal_voltage_switch	= sdhci_start_signal_voltage_switch,
 	.execute_tuning			= sdhci_execute_tuning,
-	.enable_preset_value		= sdhci_enable_preset_value,
 	.card_event			= sdhci_card_event,
+	.card_busy	= sdhci_card_busy,
 };
 
 /*****************************************************************************\
@@ -2080,14 +2096,9 @@ static void sdhci_tasklet_finish(unsigned long param)
 		   (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
 
 		/* Some controllers need this kick or reset won't work here */
-		if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) {
-			unsigned int clock;
-
+		if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET)
 			/* This is to force an update */
-			clock = host->clock;
-			host->clock = 0;
-			sdhci_set_clock(host, clock);
-		}
+			sdhci_update_clock(host);
 
 		/* Spec says we should do both at the same time, but Ricoh
 		   controllers do not like that. */
@@ -2455,6 +2466,32 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
 \*****************************************************************************/
 
 #ifdef CONFIG_PM
+void sdhci_enable_irq_wakeups(struct sdhci_host *host)
+{
+	u8 val;
+	u8 mask = SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE
+			| SDHCI_WAKE_ON_INT;
+
+	val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
+	val |= mask ;
+	/* Avoid fake wake up */
+	if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
+		val &= ~(SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE);
+	sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
+}
+EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups);
+
+void sdhci_disable_irq_wakeups(struct sdhci_host *host)
+{
+	u8 val;
+	u8 mask = SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE
+			| SDHCI_WAKE_ON_INT;
+
+	val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
+	val &= ~mask;
+	sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
+}
+EXPORT_SYMBOL_GPL(sdhci_disable_irq_wakeups);
 
 int sdhci_suspend_host(struct sdhci_host *host)
 {
@@ -2484,8 +2521,13 @@ int sdhci_suspend_host(struct sdhci_host *host)
 		return ret;
 	}
 
+	if (!device_may_wakeup(mmc_dev(host->mmc))) {
+		sdhci_mask_irqs(host, SDHCI_INT_ALL_MASK);
 		free_irq(host->irq, host);
-
+	} else {
+		sdhci_enable_irq_wakeups(host);
+		enable_irq_wake(host->irq);
+	}
 	return ret;
 }
 
@@ -2500,10 +2542,15 @@ int sdhci_resume_host(struct sdhci_host *host)
 			host->ops->enable_dma(host);
 	}
 
+	if (!device_may_wakeup(mmc_dev(host->mmc))) {
 		ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
 				  mmc_hostname(host->mmc), host);
 		if (ret)
 			return ret;
+	} else {
+		sdhci_disable_irq_wakeups(host);
+		disable_irq_wake(host->irq);
+	}
 
 	if ((host->mmc->pm_flags & MMC_PM_KEEP_POWER) &&
 	    (host->quirks2 & SDHCI_QUIRK2_HOST_OFF_CARD_ON)) {
@@ -2531,17 +2578,6 @@ int sdhci_resume_host(struct sdhci_host *host)
 }
 
 EXPORT_SYMBOL_GPL(sdhci_resume_host);
-
-void sdhci_enable_irq_wakeups(struct sdhci_host *host)
-{
-	u8 val;
-	val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
-	val |= SDHCI_WAKE_ON_INT;
-	sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
-}
-
-EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups);
-
 #endif /* CONFIG_PM */
 
 #ifdef CONFIG_PM_RUNTIME
@@ -2600,8 +2636,12 @@ int sdhci_runtime_resume_host(struct sdhci_host *host)
 	sdhci_do_set_ios(host, &host->mmc->ios);
 
 	sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios);
-	if (host_flags & SDHCI_PV_ENABLED)
-		sdhci_do_enable_preset_value(host, true);
+	if ((host_flags & SDHCI_PV_ENABLED) &&
+		!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) {
+		spin_lock_irqsave(&host->lock, flags);
+		sdhci_enable_preset_value(host, true);
+		spin_unlock_irqrestore(&host->lock, flags);
+	}
 
 	/* Set the re-tuning expiration flag */
 	if (host->flags & SDHCI_USING_RETUNING_TIMER)
@@ -2936,7 +2976,11 @@ int sdhci_add_host(struct sdhci_host *host)
 	}
 
 #ifdef CONFIG_REGULATOR
-	if (host->vmmc) {
+	/*
+	 * Voltage range check makes sense only if regulator reports
+	 * any voltage value.
+	 */
+	if (host->vmmc && regulator_get_voltage(host->vmmc) > 0) {
 		ret = regulator_is_supported_voltage(host->vmmc, 2700000,
 			3600000);
 		if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_330)))
@@ -3139,6 +3183,7 @@ int sdhci_add_host(struct sdhci_host *host)
 #ifdef SDHCI_USE_LEDS_CLASS
 reset:
 	sdhci_reset(host, SDHCI_RESET_ALL);
+	sdhci_mask_irqs(host, SDHCI_INT_ALL_MASK);
 	free_irq(host->irq, host);
 #endif
 untasklet:
@@ -3181,6 +3226,7 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
 	if (!dead)
 		sdhci_reset(host, SDHCI_RESET_ALL);
 
+	sdhci_mask_irqs(host, SDHCI_INT_ALL_MASK);
 	free_irq(host->irq, host);
 
 	del_timer_sync(&host->timer);

drivers/mmc/host/sdhci.h

@@ -229,6 +229,18 @@
 
 /* 60-FB reserved */
 
+#define SDHCI_PRESET_FOR_SDR12 0x66
+#define SDHCI_PRESET_FOR_SDR25 0x68
+#define SDHCI_PRESET_FOR_SDR50 0x6A
+#define SDHCI_PRESET_FOR_SDR104        0x6C
+#define SDHCI_PRESET_FOR_DDR50 0x6E
+#define SDHCI_PRESET_DRV_MASK  0xC000
+#define SDHCI_PRESET_DRV_SHIFT  14
+#define SDHCI_PRESET_CLKGEN_SEL_MASK   0x400
+#define SDHCI_PRESET_CLKGEN_SEL_SHIFT	10
+#define SDHCI_PRESET_SDCLK_FREQ_MASK   0x3FF
+#define SDHCI_PRESET_SDCLK_FREQ_SHIFT	0
+
 #define SDHCI_SLOT_INT_STATUS	0xFC
 
 #define SDHCI_HOST_VERSION	0xFE
@@ -269,7 +281,7 @@ struct sdhci_ops {
 	unsigned int	(*get_max_clock)(struct sdhci_host *host);
 	unsigned int	(*get_min_clock)(struct sdhci_host *host);
 	unsigned int	(*get_timeout_clock)(struct sdhci_host *host);
-	int		(*platform_8bit_width)(struct sdhci_host *host,
+	int		(*platform_bus_width)(struct sdhci_host *host,
 					       int width);
 	void (*platform_send_init_74_clocks)(struct sdhci_host *host,
 					     u8 power_mode);

drivers/mmc/host/sh_mmcif.c

@@ -56,6 +56,7 @@
 #include <linux/mmc/sh_mmcif.h>
 #include <linux/mmc/slot-gpio.h>
 #include <linux/mod_devicetable.h>
+#include <linux/mutex.h>
 #include <linux/pagemap.h>
 #include <linux/platform_device.h>
 #include <linux/pm_qos.h>
@@ -88,6 +89,7 @@
 #define CMD_SET_TBIT		(1 << 7) /* 1: tran mission bit "Low" */
 #define CMD_SET_OPDM		(1 << 6) /* 1: open/drain */
 #define CMD_SET_CCSH		(1 << 5)
+#define CMD_SET_DARS		(1 << 2) /* Dual Data Rate */
 #define CMD_SET_DATW_1		((0 << 1) | (0 << 0)) /* 1bit */
 #define CMD_SET_DATW_4		((0 << 1) | (1 << 0)) /* 4bit */
 #define CMD_SET_DATW_8		((1 << 1) | (0 << 0)) /* 8bit */
@@ -127,6 +129,10 @@
 				 INT_CCSTO | INT_CRCSTO | INT_WDATTO |	  \
 				 INT_RDATTO | INT_RBSYTO | INT_RSPTO)
 
+#define INT_ALL			(INT_RBSYE | INT_CRSPE | INT_BUFREN |	 \
+				 INT_BUFWEN | INT_CMD12DRE | INT_BUFRE | \
+				 INT_DTRANE | INT_CMD12RBE | INT_CMD12CRE)
+
 /* CE_INT_MASK */
 #define MASK_ALL		0x00000000
 #define MASK_MCCSDE		(1 << 29)
@@ -158,6 +164,11 @@
 				 MASK_MCCSTO | MASK_MCRCSTO | MASK_MWDATTO | \
 				 MASK_MRDATTO | MASK_MRBSYTO | MASK_MRSPTO)
 
+#define MASK_CLEAN		(INT_ERR_STS | MASK_MRBSYE | MASK_MCRSPE |	\
+				 MASK_MBUFREN | MASK_MBUFWEN |			\
+				 MASK_MCMD12DRE | MASK_MBUFRE | MASK_MDTRANE |	\
+				 MASK_MCMD12RBE | MASK_MCMD12CRE)
+
 /* CE_HOST_STS1 */
 #define STS1_CMDSEQ		(1 << 31)
 
@@ -195,6 +206,7 @@ enum mmcif_state {
 	STATE_IDLE,
 	STATE_REQUEST,
 	STATE_IOS,
+	STATE_TIMEOUT,
 };
 
 enum mmcif_wait_for {
@@ -216,6 +228,7 @@ struct sh_mmcif_host {
 	struct clk *hclk;
 	unsigned int clk;
 	int bus_width;
+	unsigned char timing;
 	bool sd_error;
 	bool dying;
 	long timeout;
@@ -230,6 +243,7 @@ struct sh_mmcif_host {
 	int sg_blkidx;
 	bool power;
 	bool card_present;
+	struct mutex thread_lock;
 
 	/* DMA support */
 	struct dma_chan		*chan_rx;
@@ -253,23 +267,14 @@ static inline void sh_mmcif_bitclr(struct sh_mmcif_host *host,
 static void mmcif_dma_complete(void *arg)
 {
 	struct sh_mmcif_host *host = arg;
-	struct mmc_data *data = host->mrq->data;
+	struct mmc_request *mrq = host->mrq;
 
 	dev_dbg(&host->pd->dev, "Command completed\n");
 
-	if (WARN(!data, "%s: NULL data in DMA completion!\n",
+	if (WARN(!mrq || !mrq->data, "%s: NULL data in DMA completion!\n",
 		 dev_name(&host->pd->dev)))
 		return;
 
-	if (data->flags & MMC_DATA_READ)
-		dma_unmap_sg(host->chan_rx->device->dev,
-			     data->sg, data->sg_len,
-			     DMA_FROM_DEVICE);
-	else
-		dma_unmap_sg(host->chan_tx->device->dev,
-			     data->sg, data->sg_len,
-			     DMA_TO_DEVICE);
-
 	complete(&host->dma_complete);
 }
 
@@ -423,8 +428,6 @@ static void sh_mmcif_request_dma(struct sh_mmcif_host *host,
 	if (ret < 0)
 		goto ecfgrx;
 
-	init_completion(&host->dma_complete);
-
 	return;
 
 ecfgrx:
@@ -520,13 +523,16 @@ static int sh_mmcif_error_manage(struct sh_mmcif_host *host)
 	}
 
 	if (state2 & STS2_CRC_ERR) {
-		dev_dbg(&host->pd->dev, ": CRC error\n");
+		dev_err(&host->pd->dev, " CRC error: state %u, wait %u\n",
+			host->state, host->wait_for);
 		ret = -EIO;
 	} else if (state2 & STS2_TIMEOUT_ERR) {
-		dev_dbg(&host->pd->dev, ": Timeout\n");
+		dev_err(&host->pd->dev, " Timeout: state %u, wait %u\n",
+			host->state, host->wait_for);
 		ret = -ETIMEDOUT;
 	} else {
-		dev_dbg(&host->pd->dev, ": End/Index error\n");
+		dev_dbg(&host->pd->dev, " End/Index error: state %u, wait %u\n",
+			host->state, host->wait_for);
 		ret = -EIO;
 	}
 	return ret;
@@ -549,10 +555,7 @@ static bool sh_mmcif_next_block(struct sh_mmcif_host *host, u32 *p)
 		host->pio_ptr = p;
 	}
 
-	if (host->sg_idx == data->sg_len)
-		return false;
-
-	return true;
+	return host->sg_idx != data->sg_len;
 }
 
 static void sh_mmcif_single_read(struct sh_mmcif_host *host,
@@ -562,7 +565,6 @@ static void sh_mmcif_single_read(struct sh_mmcif_host *host,
 			   BLOCK_SIZE_MASK) + 3;
 
 	host->wait_for = MMCIF_WAIT_FOR_READ;
-	schedule_delayed_work(&host->timeout_work, host->timeout);
 
 	/* buf read enable */
 	sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFREN);
@@ -576,6 +578,7 @@ static bool sh_mmcif_read_block(struct sh_mmcif_host *host)
 
 	if (host->sd_error) {
 		data->error = sh_mmcif_error_manage(host);
+		dev_dbg(&host->pd->dev, "%s(): %d\n", __func__, data->error);
 		return false;
 	}
 
@@ -604,7 +607,7 @@ static void sh_mmcif_multi_read(struct sh_mmcif_host *host,
 	host->sg_idx = 0;
 	host->sg_blkidx = 0;
 	host->pio_ptr = sg_virt(data->sg);
-	schedule_delayed_work(&host->timeout_work, host->timeout);
+
 	sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFREN);
 }
 
@@ -616,6 +619,7 @@ static bool sh_mmcif_mread_block(struct sh_mmcif_host *host)
 
 	if (host->sd_error) {
 		data->error = sh_mmcif_error_manage(host);
+		dev_dbg(&host->pd->dev, "%s(): %d\n", __func__, data->error);
 		return false;
 	}
 
@@ -627,7 +631,6 @@ static bool sh_mmcif_mread_block(struct sh_mmcif_host *host)
 	if (!sh_mmcif_next_block(host, p))
 		return false;
 
-	schedule_delayed_work(&host->timeout_work, host->timeout);
 	sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFREN);
 
 	return true;
@@ -640,7 +643,6 @@ static void sh_mmcif_single_write(struct sh_mmcif_host *host,
 			   BLOCK_SIZE_MASK) + 3;
 
 	host->wait_for = MMCIF_WAIT_FOR_WRITE;
-	schedule_delayed_work(&host->timeout_work, host->timeout);
 
 	/* buf write enable */
 	sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFWEN);
@@ -654,6 +656,7 @@ static bool sh_mmcif_write_block(struct sh_mmcif_host *host)
 
 	if (host->sd_error) {
 		data->error = sh_mmcif_error_manage(host);
+		dev_dbg(&host->pd->dev, "%s(): %d\n", __func__, data->error);
 		return false;
 	}
 
@@ -682,7 +685,7 @@ static void sh_mmcif_multi_write(struct sh_mmcif_host *host,
 	host->sg_idx = 0;
 	host->sg_blkidx = 0;
 	host->pio_ptr = sg_virt(data->sg);
-	schedule_delayed_work(&host->timeout_work, host->timeout);
+
 	sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFWEN);
 }
 
@@ -694,6 +697,7 @@ static bool sh_mmcif_mwrite_block(struct sh_mmcif_host *host)
 
 	if (host->sd_error) {
 		data->error = sh_mmcif_error_manage(host);
+		dev_dbg(&host->pd->dev, "%s(): %d\n", __func__, data->error);
 		return false;
 	}
 
@@ -705,7 +709,6 @@ static bool sh_mmcif_mwrite_block(struct sh_mmcif_host *host)
 	if (!sh_mmcif_next_block(host, p))
 		return false;
 
-	schedule_delayed_work(&host->timeout_work, host->timeout);
 	sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFWEN);
 
 	return true;
@@ -756,6 +759,7 @@ static u32 sh_mmcif_set_cmd(struct sh_mmcif_host *host,
 	}
 	switch (opc) {
 	/* RBSY */
+	case MMC_SLEEP_AWAKE:
 	case MMC_SWITCH:
 	case MMC_STOP_TRANSMISSION:
 	case MMC_SET_WRITE_PROT:
@@ -781,6 +785,17 @@ static u32 sh_mmcif_set_cmd(struct sh_mmcif_host *host,
 			dev_err(&host->pd->dev, "Unsupported bus width.\n");
 			break;
 		}
+		switch (host->timing) {
+		case MMC_TIMING_UHS_DDR50:
+			/*
+			 * MMC core will only set this timing, if the host
+			 * advertises the MMC_CAP_UHS_DDR50 capability. MMCIF
+			 * implementations with this capability, e.g. sh73a0,
+			 * will have to set it in their platform data.
+			 */
+			tmp |= CMD_SET_DARS;
+			break;
+		}
 	}
 	/* DWEN */
 	if (opc == MMC_WRITE_BLOCK || opc == MMC_WRITE_MULTIPLE_BLOCK)
@@ -824,7 +839,7 @@ static int sh_mmcif_data_trans(struct sh_mmcif_host *host,
 		sh_mmcif_single_read(host, mrq);
 		return 0;
 	default:
-		dev_err(&host->pd->dev, "UNSUPPORTED CMD = d'%08d\n", opc);
+		dev_err(&host->pd->dev, "Unsupported CMD%d\n", opc);
 		return -EINVAL;
 	}
 }
@@ -838,6 +853,7 @@ static void sh_mmcif_start_cmd(struct sh_mmcif_host *host,
 
 	switch (opc) {
 	/* response busy check */
+	case MMC_SLEEP_AWAKE:
 	case MMC_SWITCH:
 	case MMC_STOP_TRANSMISSION:
 	case MMC_SET_WRITE_PROT:
@@ -885,7 +901,6 @@ static void sh_mmcif_stop_cmd(struct sh_mmcif_host *host,
 	}
 
 	host->wait_for = MMCIF_WAIT_FOR_STOP;
-	schedule_delayed_work(&host->timeout_work, host->timeout);
 }
 
 static void sh_mmcif_request(struct mmc_host *mmc, struct mmc_request *mrq)
@@ -895,6 +910,7 @@ static void sh_mmcif_request(struct mmc_host *mmc, struct mmc_request *mrq)
 
 	spin_lock_irqsave(&host->lock, flags);
 	if (host->state != STATE_IDLE) {
+		dev_dbg(&host->pd->dev, "%s() rejected, state %u\n", __func__, host->state);
 		spin_unlock_irqrestore(&host->lock, flags);
 		mrq->cmd->error = -EAGAIN;
 		mmc_request_done(mmc, mrq);
@@ -911,6 +927,7 @@ static void sh_mmcif_request(struct mmc_host *mmc, struct mmc_request *mrq)
 		if ((mrq->cmd->flags & MMC_CMD_MASK) != MMC_CMD_BCR)
 			break;
 	case MMC_APP_CMD:
+	case SD_IO_RW_DIRECT:
 		host->state = STATE_IDLE;
 		mrq->cmd->error = -ETIMEDOUT;
 		mmc_request_done(mmc, mrq);
@@ -957,6 +974,7 @@ static void sh_mmcif_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	spin_lock_irqsave(&host->lock, flags);
 	if (host->state != STATE_IDLE) {
+		dev_dbg(&host->pd->dev, "%s() rejected, state %u\n", __func__, host->state);
 		spin_unlock_irqrestore(&host->lock, flags);
 		return;
 	}
@@ -981,7 +999,7 @@ static void sh_mmcif_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 			}
 		}
 		if (host->power) {
-			pm_runtime_put(&host->pd->dev);
+			pm_runtime_put_sync(&host->pd->dev);
 			clk_disable(host->hclk);
 			host->power = false;
 			if (ios->power_mode == MMC_POWER_OFF)
@@ -1001,6 +1019,7 @@ static void sh_mmcif_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		sh_mmcif_clock_control(host, ios->clock);
 	}
 
+	host->timing = ios->timing;
 	host->bus_width = ios->bus_width;
 	host->state = STATE_IDLE;
 }
@@ -1038,14 +1057,14 @@ static bool sh_mmcif_end_cmd(struct sh_mmcif_host *host)
 		case MMC_SELECT_CARD:
 		case MMC_APP_CMD:
 			cmd->error = -ETIMEDOUT;
-			host->sd_error = false;
 			break;
 		default:
 			cmd->error = sh_mmcif_error_manage(host);
-			dev_dbg(&host->pd->dev, "Cmd(d'%d) error %d\n",
-				cmd->opcode, cmd->error);
 			break;
 		}
+		dev_dbg(&host->pd->dev, "CMD%d error %d\n",
+			cmd->opcode, cmd->error);
+		host->sd_error = false;
 		return false;
 	}
 	if (!(cmd->flags & MMC_RSP_PRESENT)) {
@@ -1058,6 +1077,12 @@ static bool sh_mmcif_end_cmd(struct sh_mmcif_host *host)
 	if (!data)
 		return false;
 
+	/*
+	 * Completion can be signalled from DMA callback and error, so, have to
+	 * reset here, before setting .dma_active
+	 */
+	init_completion(&host->dma_complete);
+
 	if (data->flags & MMC_DATA_READ) {
 		if (host->chan_rx)
 			sh_mmcif_start_dma_rx(host);
@@ -1068,34 +1093,47 @@ static bool sh_mmcif_end_cmd(struct sh_mmcif_host *host)
 
 	if (!host->dma_active) {
 		data->error = sh_mmcif_data_trans(host, host->mrq, cmd->opcode);
-		if (!data->error)
-			return true;
-		return false;
+		return !data->error;
 	}
 
 	/* Running in the IRQ thread, can sleep */
 	time = wait_for_completion_interruptible_timeout(&host->dma_complete,
 							 host->timeout);
+
+	if (data->flags & MMC_DATA_READ)
+		dma_unmap_sg(host->chan_rx->device->dev,
+			     data->sg, data->sg_len,
+			     DMA_FROM_DEVICE);
+	else
+		dma_unmap_sg(host->chan_tx->device->dev,
+			     data->sg, data->sg_len,
+			     DMA_TO_DEVICE);
+
 	if (host->sd_error) {
 		dev_err(host->mmc->parent,
 			"Error IRQ while waiting for DMA completion!\n");
 		/* Woken up by an error IRQ: abort DMA */
-		if (data->flags & MMC_DATA_READ)
-			dmaengine_terminate_all(host->chan_rx);
-		else
-			dmaengine_terminate_all(host->chan_tx);
 		data->error = sh_mmcif_error_manage(host);
 	} else if (!time) {
+		dev_err(host->mmc->parent, "DMA timeout!\n");
 		data->error = -ETIMEDOUT;
 	} else if (time < 0) {
+		dev_err(host->mmc->parent,
+			"wait_for_completion_...() error %ld!\n", time);
 		data->error = time;
 	}
 	sh_mmcif_bitclr(host, MMCIF_CE_BUF_ACC,
 			BUF_ACC_DMAREN | BUF_ACC_DMAWEN);
 	host->dma_active = false;
 
-	if (data->error)
+	if (data->error) {
 		data->bytes_xfered = 0;
+		/* Abort DMA */
+		if (data->flags & MMC_DATA_READ)
+			dmaengine_terminate_all(host->chan_rx);
+		else
+			dmaengine_terminate_all(host->chan_tx);
+	}
 
 	return false;
 }
@@ -1103,10 +1141,21 @@ static bool sh_mmcif_end_cmd(struct sh_mmcif_host *host)
 static irqreturn_t sh_mmcif_irqt(int irq, void *dev_id)
 {
 	struct sh_mmcif_host *host = dev_id;
-	struct mmc_request *mrq = host->mrq;
+	struct mmc_request *mrq;
+	bool wait = false;
 
 	cancel_delayed_work_sync(&host->timeout_work);
 
+	mutex_lock(&host->thread_lock);
+
+	mrq = host->mrq;
+	if (!mrq) {
+		dev_dbg(&host->pd->dev, "IRQ thread state %u, wait %u: NULL mrq!\n",
+			host->state, host->wait_for);
+		mutex_unlock(&host->thread_lock);
+		return IRQ_HANDLED;
+	}
+
 	/*
 	 * All handlers return true, if processing continues, and false, if the
 	 * request has to be completed - successfully or not
@@ -1114,35 +1163,32 @@ static irqreturn_t sh_mmcif_irqt(int irq, void *dev_id)
 	switch (host->wait_for) {
 	case MMCIF_WAIT_FOR_REQUEST:
 		/* We're too late, the timeout has already kicked in */
+		mutex_unlock(&host->thread_lock);
 		return IRQ_HANDLED;
 	case MMCIF_WAIT_FOR_CMD:
-		if (sh_mmcif_end_cmd(host))
-			/* Wait for data */
-			return IRQ_HANDLED;
+		/* Wait for data? */
+		wait = sh_mmcif_end_cmd(host);
 		break;
 	case MMCIF_WAIT_FOR_MREAD:
-		if (sh_mmcif_mread_block(host))
-			/* Wait for more data */
-			return IRQ_HANDLED;
+		/* Wait for more data? */
+		wait = sh_mmcif_mread_block(host);
 		break;
 	case MMCIF_WAIT_FOR_READ:
-		if (sh_mmcif_read_block(host))
-			/* Wait for data end */
-			return IRQ_HANDLED;
+		/* Wait for data end? */
+		wait = sh_mmcif_read_block(host);
 		break;
 	case MMCIF_WAIT_FOR_MWRITE:
-		if (sh_mmcif_mwrite_block(host))
-			/* Wait data to write */
-			return IRQ_HANDLED;
+		/* Wait data to write? */
+		wait = sh_mmcif_mwrite_block(host);
 		break;
 	case MMCIF_WAIT_FOR_WRITE:
-		if (sh_mmcif_write_block(host))
-			/* Wait for data end */
-			return IRQ_HANDLED;
+		/* Wait for data end? */
+		wait = sh_mmcif_write_block(host);
 		break;
 	case MMCIF_WAIT_FOR_STOP:
 		if (host->sd_error) {
 			mrq->stop->error = sh_mmcif_error_manage(host);
+			dev_dbg(&host->pd->dev, "%s(): %d\n", __func__, mrq->stop->error);
 			break;
 		}
 		sh_mmcif_get_cmd12response(host, mrq->stop);
@@ -1150,13 +1196,22 @@ static irqreturn_t sh_mmcif_irqt(int irq, void *dev_id)
 		break;
 	case MMCIF_WAIT_FOR_READ_END:
 	case MMCIF_WAIT_FOR_WRITE_END:
-		if (host->sd_error)
+		if (host->sd_error) {
 			mrq->data->error = sh_mmcif_error_manage(host);
+			dev_dbg(&host->pd->dev, "%s(): %d\n", __func__, mrq->data->error);
+		}
 		break;
 	default:
 		BUG();
 	}
 
+	if (wait) {
+		schedule_delayed_work(&host->timeout_work, host->timeout);
+		/* Wait for more data */
+		mutex_unlock(&host->thread_lock);
+		return IRQ_HANDLED;
+	}
+
 	if (host->wait_for != MMCIF_WAIT_FOR_STOP) {
 		struct mmc_data *data = mrq->data;
 		if (!mrq->cmd->error && data && !data->error)
@@ -1165,16 +1220,21 @@ static irqreturn_t sh_mmcif_irqt(int irq, void *dev_id)
 
 		if (mrq->stop && !mrq->cmd->error && (!data || !data->error)) {
 			sh_mmcif_stop_cmd(host, mrq);
-			if (!mrq->stop->error)
+			if (!mrq->stop->error) {
+				schedule_delayed_work(&host->timeout_work, host->timeout);
+				mutex_unlock(&host->thread_lock);
 				return IRQ_HANDLED;
 			}
 		}
+	}
 
 	host->wait_for = MMCIF_WAIT_FOR_REQUEST;
 	host->state = STATE_IDLE;
 	host->mrq = NULL;
 	mmc_request_done(host->mmc, mrq);
 
+	mutex_unlock(&host->thread_lock);
+
 	return IRQ_HANDLED;
 }
 
@@ -1182,56 +1242,22 @@ static irqreturn_t sh_mmcif_intr(int irq, void *dev_id)
 {
 	struct sh_mmcif_host *host = dev_id;
 	u32 state;
-	int err = 0;
 
 	state = sh_mmcif_readl(host->addr, MMCIF_CE_INT);
-
-	if (state & INT_ERR_STS) {
-		/* error interrupts - process first */
 	sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~state);
-		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, state);
-		err = 1;
-	} else if (state & INT_RBSYE) {
-		sh_mmcif_writel(host->addr, MMCIF_CE_INT,
-				~(INT_RBSYE | INT_CRSPE));
-		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MRBSYE);
-	} else if (state & INT_CRSPE) {
-		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_CRSPE);
-		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MCRSPE);
-	} else if (state & INT_BUFREN) {
-		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_BUFREN);
-		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MBUFREN);
-	} else if (state & INT_BUFWEN) {
-		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_BUFWEN);
-		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MBUFWEN);
-	} else if (state & INT_CMD12DRE) {
-		sh_mmcif_writel(host->addr, MMCIF_CE_INT,
-			~(INT_CMD12DRE | INT_CMD12RBE |
-			  INT_CMD12CRE | INT_BUFRE));
-		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MCMD12DRE);
-	} else if (state & INT_BUFRE) {
-		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_BUFRE);
-		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MBUFRE);
-	} else if (state & INT_DTRANE) {
-		sh_mmcif_writel(host->addr, MMCIF_CE_INT,
-			~(INT_CMD12DRE | INT_CMD12RBE |
-			  INT_CMD12CRE | INT_DTRANE));
-		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MDTRANE);
-	} else if (state & INT_CMD12RBE) {
-		sh_mmcif_writel(host->addr, MMCIF_CE_INT,
-				~(INT_CMD12RBE | INT_CMD12CRE));
-		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MCMD12RBE);
-	} else {
-		dev_dbg(&host->pd->dev, "Unsupported interrupt: 0x%x\n", state);
-		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~state);
-		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, state);
-		err = 1;
-	}
-	if (err) {
+	sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, state & MASK_CLEAN);
+
+	if (state & ~MASK_CLEAN)
+		dev_dbg(&host->pd->dev, "IRQ state = 0x%08x incompletely cleared\n",
+			state);
+
+	if (state & INT_ERR_STS || state & ~INT_ALL) {
 		host->sd_error = true;
-		dev_dbg(&host->pd->dev, "int err state = %08x\n", state);
+		dev_dbg(&host->pd->dev, "int err state = 0x%08x\n", state);
 	}
 	if (state & ~(INT_CMD12RBE | INT_CMD12CRE)) {
+		if (!host->mrq)
+			dev_dbg(&host->pd->dev, "NULL IRQ state = 0x%08x\n", state);
 		if (!host->dma_active)
 			return IRQ_WAKE_THREAD;
 		else if (host->sd_error)
@@ -1248,11 +1274,24 @@ static void mmcif_timeout_work(struct work_struct *work)
 	struct delayed_work *d = container_of(work, struct delayed_work, work);
 	struct sh_mmcif_host *host = container_of(d, struct sh_mmcif_host, timeout_work);
 	struct mmc_request *mrq = host->mrq;
+	unsigned long flags;
 
 	if (host->dying)
 		/* Don't run after mmc_remove_host() */
 		return;
 
+	dev_err(&host->pd->dev, "Timeout waiting for %u on CMD%u\n",
+		host->wait_for, mrq->cmd->opcode);
+
+	spin_lock_irqsave(&host->lock, flags);
+	if (host->state == STATE_IDLE) {
+		spin_unlock_irqrestore(&host->lock, flags);
+		return;
+	}
+
+	host->state = STATE_TIMEOUT;
+	spin_unlock_irqrestore(&host->lock, flags);
+
 	/*
 	 * Handle races with cancel_delayed_work(), unless
 	 * cancel_delayed_work_sync() is used
@@ -1306,10 +1345,11 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 	struct sh_mmcif_plat_data *pd = pdev->dev.platform_data;
 	struct resource *res;
 	void __iomem *reg;
+	const char *name;
 
 	irq[0] = platform_get_irq(pdev, 0);
 	irq[1] = platform_get_irq(pdev, 1);
-	if (irq[0] < 0 || irq[1] < 0) {
+	if (irq[0] < 0) {
 		dev_err(&pdev->dev, "Get irq error\n");
 		return -ENXIO;
 	}
@@ -1329,10 +1369,11 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 		ret = -ENOMEM;
 		goto ealloch;
 	}
+	mmc_of_parse(mmc);
 	host		= mmc_priv(mmc);
 	host->mmc	= mmc;
 	host->addr	= reg;
-	host->timeout	= 1000;
+	host->timeout	= msecs_to_jiffies(1000);
 
 	host->pd = pdev;
 
@@ -1341,7 +1382,7 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 	mmc->ops = &sh_mmcif_ops;
 	sh_mmcif_init_ocr(host);
 
-	mmc->caps = MMC_CAP_MMC_HIGHSPEED;
+	mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_WAIT_WHILE_BUSY;
 	if (pd && pd->caps)
 		mmc->caps |= pd->caps;
 	mmc->max_segs = 32;
@@ -1374,16 +1415,20 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 	sh_mmcif_sync_reset(host);
 	sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL);
 
-	ret = request_threaded_irq(irq[0], sh_mmcif_intr, sh_mmcif_irqt, 0, "sh_mmc:error", host);
+	name = irq[1] < 0 ? dev_name(&pdev->dev) : "sh_mmc:error";
+	ret = request_threaded_irq(irq[0], sh_mmcif_intr, sh_mmcif_irqt, 0, name, host);
 	if (ret) {
-		dev_err(&pdev->dev, "request_irq error (sh_mmc:error)\n");
+		dev_err(&pdev->dev, "request_irq error (%s)\n", name);
 		goto ereqirq0;
 	}
-	ret = request_threaded_irq(irq[1], sh_mmcif_intr, sh_mmcif_irqt, 0, "sh_mmc:int", host);
+	if (irq[1] >= 0) {
+		ret = request_threaded_irq(irq[1], sh_mmcif_intr, sh_mmcif_irqt,
+					   0, "sh_mmc:int", host);
 		if (ret) {
 			dev_err(&pdev->dev, "request_irq error (sh_mmc:int)\n");
 			goto ereqirq1;
 		}
+	}
 
 	if (pd && pd->use_cd_gpio) {
 		ret = mmc_gpio_request_cd(mmc, pd->cd_gpio);
@@ -1391,6 +1436,8 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 			goto erqcd;
 	}
 
+	mutex_init(&host->thread_lock);
+
 	clk_disable(host->hclk);
 	ret = mmc_add_host(mmc);
 	if (ret < 0)
@@ -1404,9 +1451,8 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 	return ret;
 
 emmcaddh:
-	if (pd && pd->use_cd_gpio)
-		mmc_gpio_free_cd(mmc);
 erqcd:
+	if (irq[1] >= 0)
 		free_irq(irq[1], host);
 ereqirq1:
 	free_irq(irq[0], host);
@@ -1427,7 +1473,6 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 static int sh_mmcif_remove(struct platform_device *pdev)
 {
 	struct sh_mmcif_host *host = platform_get_drvdata(pdev);
-	struct sh_mmcif_plat_data *pd = pdev->dev.platform_data;
 	int irq[2];
 
 	host->dying = true;
@@ -1436,9 +1481,6 @@ static int sh_mmcif_remove(struct platform_device *pdev)
 
 	dev_pm_qos_hide_latency_limit(&pdev->dev);
 
-	if (pd && pd->use_cd_gpio)
-		mmc_gpio_free_cd(host->mmc);
-
 	mmc_remove_host(host->mmc);
 	sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL);
 
@@ -1456,6 +1498,7 @@ static int sh_mmcif_remove(struct platform_device *pdev)
 	irq[1] = platform_get_irq(pdev, 1);
 
 	free_irq(irq[0], host);
+	if (irq[1] >= 0)
 		free_irq(irq[1], host);
 
 	platform_set_drvdata(pdev, NULL);

drivers/mmc/host/sh_mobile_sdhi.c

@@ -23,6 +23,7 @@
 #include <linux/slab.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
@@ -32,6 +33,16 @@
 
 #include "tmio_mmc.h"
 
+struct sh_mobile_sdhi_of_data {
+	unsigned long tmio_flags;
+};
+
+static const struct sh_mobile_sdhi_of_data sh_mobile_sdhi_of_cfg[] = {
+	{
+		.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
+	},
+};
+
 struct sh_mobile_sdhi {
 	struct clk *clk;
 	struct tmio_mmc_data mmc_data;
@@ -117,8 +128,18 @@ static const struct sh_mobile_sdhi_ops sdhi_ops = {
 	.cd_wakeup = sh_mobile_sdhi_cd_wakeup,
 };
 
+static const struct of_device_id sh_mobile_sdhi_of_match[] = {
+	{ .compatible = "renesas,shmobile-sdhi" },
+	{ .compatible = "renesas,sh7372-sdhi" },
+	{ .compatible = "renesas,r8a7740-sdhi", .data = &sh_mobile_sdhi_of_cfg[0], },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sh_mobile_sdhi_of_match);
+
 static int sh_mobile_sdhi_probe(struct platform_device *pdev)
 {
+	const struct of_device_id *of_id =
+		of_match_device(sh_mobile_sdhi_of_match, &pdev->dev);
 	struct sh_mobile_sdhi *priv;
 	struct tmio_mmc_data *mmc_data;
 	struct sh_mobile_sdhi_info *p = pdev->dev.platform_data;
@@ -126,7 +147,7 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
 	int irq, ret, i = 0;
 	bool multiplexed_isr = true;
 
-	priv = kzalloc(sizeof(struct sh_mobile_sdhi), GFP_KERNEL);
+	priv = devm_kzalloc(&pdev->dev, sizeof(struct sh_mobile_sdhi), GFP_KERNEL);
 	if (priv == NULL) {
 		dev_err(&pdev->dev, "kzalloc failed\n");
 		return -ENOMEM;
@@ -135,15 +156,14 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
 	mmc_data = &priv->mmc_data;
 
 	if (p) {
-		p->pdata = mmc_data;
 		if (p->init) {
 			ret = p->init(pdev, &sdhi_ops);
 			if (ret)
-				goto einit;
+				return ret;
 		}
 	}
 
-	priv->clk = clk_get(&pdev->dev, NULL);
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(priv->clk)) {
 		ret = PTR_ERR(priv->clk);
 		dev_err(&pdev->dev, "cannot get clock: %d\n", ret);
@@ -153,10 +173,9 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
 	mmc_data->clk_enable = sh_mobile_sdhi_clk_enable;
 	mmc_data->clk_disable = sh_mobile_sdhi_clk_disable;
 	mmc_data->capabilities = MMC_CAP_MMC_HIGHSPEED;
+	mmc_data->write16_hook = sh_mobile_sdhi_write16_hook;
 	if (p) {
 		mmc_data->flags = p->tmio_flags;
-		if (mmc_data->flags & TMIO_MMC_HAS_IDLE_WAIT)
-			mmc_data->write16_hook = sh_mobile_sdhi_write16_hook;
 		mmc_data->ocr_mask = p->tmio_ocr_mask;
 		mmc_data->capabilities |= p->tmio_caps;
 		mmc_data->capabilities2 |= p->tmio_caps2;
@@ -187,6 +206,11 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
 	 */
 	mmc_data->flags |= TMIO_MMC_SDIO_IRQ;
 
+	if (of_id && of_id->data) {
+		const struct sh_mobile_sdhi_of_data *of_data = of_id->data;
+		mmc_data->flags |= of_data->tmio_flags;
+	}
+
 	ret = tmio_mmc_host_probe(&host, pdev, mmc_data);
 	if (ret < 0)
 		goto eprobe;
@@ -199,33 +223,33 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
 	irq = platform_get_irq_byname(pdev, SH_MOBILE_SDHI_IRQ_CARD_DETECT);
 	if (irq >= 0) {
 		multiplexed_isr = false;
-		ret = request_irq(irq, tmio_mmc_card_detect_irq, 0,
+		ret = devm_request_irq(&pdev->dev, irq, tmio_mmc_card_detect_irq, 0,
 				  dev_name(&pdev->dev), host);
 		if (ret)
-			goto eirq_card_detect;
+			goto eirq;
 	}
 
 	irq = platform_get_irq_byname(pdev, SH_MOBILE_SDHI_IRQ_SDIO);
 	if (irq >= 0) {
 		multiplexed_isr = false;
-		ret = request_irq(irq, tmio_mmc_sdio_irq, 0,
+		ret = devm_request_irq(&pdev->dev, irq, tmio_mmc_sdio_irq, 0,
 				  dev_name(&pdev->dev), host);
 		if (ret)
-			goto eirq_sdio;
+			goto eirq;
 	}
 
 	irq = platform_get_irq_byname(pdev, SH_MOBILE_SDHI_IRQ_SDCARD);
 	if (irq >= 0) {
 		multiplexed_isr = false;
-		ret = request_irq(irq, tmio_mmc_sdcard_irq, 0,
+		ret = devm_request_irq(&pdev->dev, irq, tmio_mmc_sdcard_irq, 0,
 				  dev_name(&pdev->dev), host);
 		if (ret)
-			goto eirq_sdcard;
+			goto eirq;
 	} else if (!multiplexed_isr) {
 		dev_err(&pdev->dev,
 			"Principal SD-card IRQ is missing among named interrupts\n");
 		ret = irq;
-		goto eirq_sdcard;
+		goto eirq;
 	}
 
 	if (multiplexed_isr) {
@@ -234,15 +258,15 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
 			if (irq < 0)
 				break;
 			i++;
-			ret = request_irq(irq, tmio_mmc_irq, 0,
+			ret = devm_request_irq(&pdev->dev, irq, tmio_mmc_irq, 0,
 					  dev_name(&pdev->dev), host);
 			if (ret)
-				goto eirq_multiplexed;
+				goto eirq;
 		}
 
 		/* There must be at least one IRQ source */
 		if (!i)
-			goto eirq_multiplexed;
+			goto eirq;
 	}
 
 	dev_info(&pdev->dev, "%s base at 0x%08lx clock rate %u MHz\n",
@@ -252,28 +276,12 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
 
 	return ret;
 
-eirq_multiplexed:
-	while (i--) {
-		irq = platform_get_irq(pdev, i);
-		free_irq(irq, host);
-	}
-eirq_sdcard:
-	irq = platform_get_irq_byname(pdev, SH_MOBILE_SDHI_IRQ_SDIO);
-	if (irq >= 0)
-		free_irq(irq, host);
-eirq_sdio:
-	irq = platform_get_irq_byname(pdev, SH_MOBILE_SDHI_IRQ_CARD_DETECT);
-	if (irq >= 0)
-		free_irq(irq, host);
-eirq_card_detect:
+eirq:
 	tmio_mmc_host_remove(host);
 eprobe:
-	clk_put(priv->clk);
 eclkget:
 	if (p && p->cleanup)
 		p->cleanup(pdev);
-einit:
-	kfree(priv);
 	return ret;
 }
 
@@ -281,29 +289,13 @@ static int sh_mobile_sdhi_remove(struct platform_device *pdev)
 {
 	struct mmc_host *mmc = platform_get_drvdata(pdev);
 	struct tmio_mmc_host *host = mmc_priv(mmc);
-	struct sh_mobile_sdhi *priv = container_of(host->pdata, struct sh_mobile_sdhi, mmc_data);
 	struct sh_mobile_sdhi_info *p = pdev->dev.platform_data;
-	int i = 0, irq;
-
-	if (p)
-		p->pdata = NULL;
 
 	tmio_mmc_host_remove(host);
 
-	while (1) {
-		irq = platform_get_irq(pdev, i++);
-		if (irq < 0)
-			break;
-		free_irq(irq, host);
-	}
-
-	clk_put(priv->clk);
-
 	if (p && p->cleanup)
 		p->cleanup(pdev);
 
-	kfree(priv);
-
 	return 0;
 }
 
@@ -314,12 +306,6 @@ static const struct dev_pm_ops tmio_mmc_dev_pm_ops = {
 	.runtime_resume = tmio_mmc_host_runtime_resume,
 };
 
-static const struct of_device_id sh_mobile_sdhi_of_match[] = {
-	{ .compatible = "renesas,shmobile-sdhi" },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, sh_mobile_sdhi_of_match);
-
 static struct platform_driver sh_mobile_sdhi_driver = {
 	.driver		= {
 		.name	= "sh_mobile_sdhi",

drivers/mmc/host/tmio_mmc_pio.c

@@ -43,6 +43,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_qos.h>
 #include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
 #include <linux/scatterlist.h>
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
@@ -155,6 +156,7 @@ static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock)
 		host->set_clk_div(host->pdev, (clk>>22) & 1);
 
 	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff);
+	msleep(10);
 }
 
 static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
@@ -768,16 +770,48 @@ static int tmio_mmc_clk_update(struct mmc_host *mmc)
 	return ret;
 }
 
-static void tmio_mmc_set_power(struct tmio_mmc_host *host, struct mmc_ios *ios)
+static void tmio_mmc_power_on(struct tmio_mmc_host *host, unsigned short vdd)
 {
 	struct mmc_host *mmc = host->mmc;
+	int ret = 0;
+
+	/* .set_ios() is returning void, so, no chance to report an error */
 
 	if (host->set_pwr)
-		host->set_pwr(host->pdev, ios->power_mode != MMC_POWER_OFF);
+		host->set_pwr(host->pdev, 1);
+
+	if (!IS_ERR(mmc->supply.vmmc)) {
+		ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
+		/*
+		 * Attention: empiric value. With a b43 WiFi SDIO card this
+		 * delay proved necessary for reliable card-insertion probing.
+		 * 100us were not enough. Is this the same 140us delay, as in
+		 * tmio_mmc_set_ios()?
+		 */
+		udelay(200);
+	}
+	/*
+	 * It seems, VccQ should be switched on after Vcc, this is also what the
+	 * omap_hsmmc.c driver does.
+	 */
+	if (!IS_ERR(mmc->supply.vqmmc) && !ret) {
+		regulator_enable(mmc->supply.vqmmc);
+		udelay(200);
+	}
+}
+
+static void tmio_mmc_power_off(struct tmio_mmc_host *host)
+{
+	struct mmc_host *mmc = host->mmc;
+
+	if (!IS_ERR(mmc->supply.vqmmc))
+		regulator_disable(mmc->supply.vqmmc);
+
 	if (!IS_ERR(mmc->supply.vmmc))
-		/* Errors ignored... */
-		mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
-				      ios->power_mode ? ios->vdd : 0);
+		mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
+
+	if (host->set_pwr)
+		host->set_pwr(host->pdev, 0);
 }
 
 /* Set MMC clock / power.
@@ -828,18 +862,20 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		if (!host->power) {
 			tmio_mmc_clk_update(mmc);
 			pm_runtime_get_sync(dev);
-			host->power = true;
 		}
 		tmio_mmc_set_clock(host, ios->clock);
-		/* power up SD bus */
-		tmio_mmc_set_power(host, ios);
+		if (!host->power) {
+			/* power up SD card and the bus */
+			tmio_mmc_power_on(host, ios->vdd);
+			host->power = true;
+		}
 		/* start bus clock */
 		tmio_mmc_clk_start(host);
 	} else if (ios->power_mode != MMC_POWER_UP) {
-		if (ios->power_mode == MMC_POWER_OFF)
-			tmio_mmc_set_power(host, ios);
 		if (host->power) {
 			struct tmio_mmc_data *pdata = host->pdata;
+			if (ios->power_mode == MMC_POWER_OFF)
+				tmio_mmc_power_off(host);
 			tmio_mmc_clk_stop(host);
 			host->power = false;
 			pm_runtime_put(dev);
@@ -918,6 +954,17 @@ static void tmio_mmc_init_ocr(struct tmio_mmc_host *host)
 		dev_warn(mmc_dev(mmc), "Platform OCR mask is ignored\n");
 }
 
+static void tmio_mmc_of_parse(struct platform_device *pdev,
+			      struct tmio_mmc_data *pdata)
+{
+	const struct device_node *np = pdev->dev.of_node;
+	if (!np)
+		return;
+
+	if (of_get_property(np, "toshiba,mmc-wrprotect-disable", NULL))
+		pdata->flags |= TMIO_MMC_WRPROTECT_DISABLE;
+}
+
 int tmio_mmc_host_probe(struct tmio_mmc_host **host,
 				  struct platform_device *pdev,
 				  struct tmio_mmc_data *pdata)
@@ -928,6 +975,11 @@ int tmio_mmc_host_probe(struct tmio_mmc_host **host,
 	int ret;
 	u32 irq_mask = TMIO_MASK_CMD;
 
+	tmio_mmc_of_parse(pdev, pdata);
+
+	if (!(pdata->flags & TMIO_MMC_HAS_IDLE_WAIT))
+		pdata->write16_hook = NULL;
+
 	res_ctl = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res_ctl)
 		return -EINVAL;
@@ -936,6 +988,8 @@ int tmio_mmc_host_probe(struct tmio_mmc_host **host,
 	if (!mmc)
 		return -ENOMEM;
 
+	mmc_of_parse(mmc);
+
 	pdata->dev = &pdev->dev;
 	_host = mmc_priv(mmc);
 	_host->pdata = pdata;
@@ -956,7 +1010,7 @@ int tmio_mmc_host_probe(struct tmio_mmc_host **host,
 	}
 
 	mmc->ops = &tmio_mmc_ops;
-	mmc->caps = MMC_CAP_4_BIT_DATA | pdata->capabilities;
+	mmc->caps |= MMC_CAP_4_BIT_DATA | pdata->capabilities;
 	mmc->caps2 = pdata->capabilities2;
 	mmc->max_segs = 32;
 	mmc->max_blk_size = 512;
@@ -968,7 +1022,8 @@ int tmio_mmc_host_probe(struct tmio_mmc_host **host,
 
 	_host->native_hotplug = !(pdata->flags & TMIO_MMC_USE_GPIO_CD ||
 				  mmc->caps & MMC_CAP_NEEDS_POLL ||
-				  mmc->caps & MMC_CAP_NONREMOVABLE);
+				  mmc->caps & MMC_CAP_NONREMOVABLE ||
+				  mmc->slot.cd_irq >= 0);
 
 	_host->power = false;
 	pm_runtime_enable(&pdev->dev);
@@ -1060,16 +1115,8 @@ EXPORT_SYMBOL(tmio_mmc_host_probe);
 void tmio_mmc_host_remove(struct tmio_mmc_host *host)
 {
 	struct platform_device *pdev = host->pdev;
-	struct tmio_mmc_data *pdata = host->pdata;
 	struct mmc_host *mmc = host->mmc;
 
-	if (pdata->flags & TMIO_MMC_USE_GPIO_CD)
-		/*
-		 * This means we can miss a card-eject, but this is anyway
-		 * possible, because of delayed processing of hotplug events.
-		 */
-		mmc_gpio_free_cd(mmc);
-
 	if (!host->native_hotplug)
 		pm_runtime_get_sync(&pdev->dev);
 

drivers/mmc/host/wmt-sdmmc.c

@@ -1012,7 +1012,7 @@ static const struct dev_pm_ops wmt_mci_pm = {
 
 static struct platform_driver wmt_mci_driver = {
 	.probe = wmt_mci_probe,
-	.remove = __exit_p(wmt_mci_remove),
+	.remove = wmt_mci_remove,
 	.driver = {
 		.name = DRIVER_NAME,
 		.owner = THIS_MODULE,

include/linux/mfd/tmio.h

@@ -64,12 +64,6 @@
  * Some controllers can support SDIO IRQ signalling.
  */
 #define TMIO_MMC_SDIO_IRQ		(1 << 2)
-/*
- * Some platforms can detect card insertion events with controller powered
- * down, using a GPIO IRQ, in which case they have to fill in cd_irq, cd_gpio,
- * and cd_flags fields of struct tmio_mmc_data.
- */
-#define TMIO_MMC_HAS_COLD_CD		(1 << 3)
 /*
  * Some controllers require waiting for the SD bus to become
  * idle before writing to some registers.
@@ -116,18 +110,6 @@ struct tmio_mmc_data {
 	void (*clk_disable)(struct platform_device *pdev);
 };
 
-/*
- * This function is deprecated and will be removed soon. Please, convert your
- * platform to use drivers/mmc/core/cd-gpio.c
- */
-#include <linux/mmc/host.h>
-static inline void tmio_mmc_cd_wakeup(struct tmio_mmc_data *pdata)
-{
-	if (pdata)
-		mmc_detect_change(dev_get_drvdata(pdata->dev),
-				  msecs_to_jiffies(100));
-}
-
 /*
  * data for the NAND controller
  */

include/linux/mmc/card.h

@@ -53,6 +53,9 @@ struct mmc_ext_csd {
 	u8			part_config;
 	u8			cache_ctrl;
 	u8			rst_n_function;
+	u8			max_packed_writes;
+	u8			max_packed_reads;
+	u8			packed_event_en;
 	unsigned int		part_time;		/* Units: ms */
 	unsigned int		sa_timeout;		/* Units: 100ns */
 	unsigned int		generic_cmd6_time;	/* Units: 10ms */
@@ -83,7 +86,7 @@ struct mmc_ext_csd {
 	unsigned int            data_tag_unit_size;     /* DATA TAG UNIT size */
 	unsigned int		boot_ro_lock;		/* ro lock support */
 	bool			boot_ro_lockable;
-	u8			raw_exception_status;	/* 53 */
+	u8			raw_exception_status;	/* 54 */
 	u8			raw_partition_support;	/* 160 */
 	u8			raw_rpmb_size_mult;	/* 168 */
 	u8			raw_erased_mem_count;	/* 181 */
@@ -187,6 +190,18 @@ struct sdio_func_tuple;
 
 #define SDIO_MAX_FUNCS		7
 
+enum mmc_blk_status {
+	MMC_BLK_SUCCESS = 0,
+	MMC_BLK_PARTIAL,
+	MMC_BLK_CMD_ERR,
+	MMC_BLK_RETRY,
+	MMC_BLK_ABORT,
+	MMC_BLK_DATA_ERR,
+	MMC_BLK_ECC_ERR,
+	MMC_BLK_NOMEDIUM,
+	MMC_BLK_NEW_REQUEST,
+};
+
 /* The number of MMC physical partitions.  These consist of:
  * boot partitions (2), general purpose partitions (4) in MMC v4.4.
  */
@@ -295,6 +310,11 @@ static inline void mmc_part_add(struct mmc_card *card, unsigned int size,
 	card->nr_parts++;
 }
 
+static inline bool mmc_large_sector(struct mmc_card *card)
+{
+	return card->ext_csd.data_sector_size == 4096;
+}
+
 /*
  *  The world is not perfect and supplies us with broken mmc/sdio devices.
  *  For at least some of these bugs we need a work-around.

include/linux/mmc/core.h

@@ -18,6 +18,9 @@ struct mmc_request;
 struct mmc_command {
 	u32			opcode;
 	u32			arg;
+#define MMC_CMD23_ARG_REL_WR	(1 << 31)
+#define MMC_CMD23_ARG_PACKED	((0 << 31) | (1 << 30))
+#define MMC_CMD23_ARG_TAG_REQ	(1 << 29)
 	u32			resp[4];
 	unsigned int		flags;		/* expected response type */
 #define MMC_RSP_PRESENT	(1 << 0)
@@ -120,6 +123,7 @@ struct mmc_data {
 	s32			host_cookie;	/* host private data */
 };
 
+struct mmc_host;
 struct mmc_request {
 	struct mmc_command	*sbc;		/* SET_BLOCK_COUNT for multiblock */
 	struct mmc_command	*cmd;
@@ -128,9 +132,9 @@ struct mmc_request {
 
 	struct completion	completion;
 	void			(*done)(struct mmc_request *);/* completion function */
+	struct mmc_host		*host;
 };
 
-struct mmc_host;
 struct mmc_card;
 struct mmc_async_req;
 
@@ -147,6 +151,7 @@ extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
 extern void mmc_start_bkops(struct mmc_card *card, bool from_exception);
 extern int __mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int, bool);
 extern int mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int);
+extern int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd);
 
 #define MMC_ERASE_ARG		0x00000000
 #define MMC_SECURE_ERASE_ARG	0x80000000

include/linux/mmc/dw_mmc.h

@@ -209,8 +209,10 @@ struct dw_mci_dma_ops {
 #define DW_MCI_QUIRK_HIGHSPEED			BIT(2)
 /* Unreliable card detection */
 #define DW_MCI_QUIRK_BROKEN_CARD_DETECTION	BIT(3)
-/* Write Protect detection not available */
-#define DW_MCI_QUIRK_NO_WRITE_PROTECT		BIT(4)
+
+/* Slot level quirks */
+/* This slot has no write protect */
+#define DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT	BIT(0)
 
 struct dma_pdata;
 

include/linux/mmc/host.h

@@ -131,9 +131,11 @@ struct mmc_host_ops {
 
 	int	(*start_signal_voltage_switch)(struct mmc_host *host, struct mmc_ios *ios);
 
+	/* Check if the card is pulling dat[0:3] low */
+	int	(*card_busy)(struct mmc_host *host);
+
 	/* The tuning command opcode value is different for SD and eMMC cards */
 	int	(*execute_tuning)(struct mmc_host *host, u32 opcode);
-	void	(*enable_preset_value)(struct mmc_host *host, bool enable);
 	int	(*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv);
 	void	(*hw_reset)(struct mmc_host *host);
 	void	(*card_event)(struct mmc_host *host);
@@ -170,6 +172,22 @@ struct mmc_slot {
 	void *handler_priv;
 };
 
+/**
+ * mmc_context_info - synchronization details for mmc context
+ * @is_done_rcv		wake up reason was done request
+ * @is_new_req		wake up reason was new request
+ * @is_waiting_last_req	mmc context waiting for single running request
+ * @wait		wait queue
+ * @lock		lock to protect data fields
+ */
+struct mmc_context_info {
+	bool			is_done_rcv;
+	bool			is_new_req;
+	bool			is_waiting_last_req;
+	wait_queue_head_t	wait;
+	spinlock_t		lock;
+};
+
 struct regulator;
 
 struct mmc_supply {
@@ -258,6 +276,10 @@ struct mmc_host {
 #define MMC_CAP2_HC_ERASE_SZ	(1 << 9)	/* High-capacity erase size */
 #define MMC_CAP2_CD_ACTIVE_HIGH	(1 << 10)	/* Card-detect signal active high */
 #define MMC_CAP2_RO_ACTIVE_HIGH	(1 << 11)	/* Write-protect signal active high */
+#define MMC_CAP2_PACKED_RD	(1 << 12)	/* Allow packed read */
+#define MMC_CAP2_PACKED_WR	(1 << 13)	/* Allow packed write */
+#define MMC_CAP2_PACKED_CMD	(MMC_CAP2_PACKED_RD | \
+				 MMC_CAP2_PACKED_WR)
 
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 
@@ -331,6 +353,7 @@ struct mmc_host {
 	struct dentry		*debugfs_root;
 
 	struct mmc_async_req	*areq;		/* active async req */
+	struct mmc_context_info	context_info;	/* async synchronization info */
 
 #ifdef CONFIG_FAIL_MMC_REQUEST
 	struct fault_attr	fail_mmc_request;
@@ -341,10 +364,11 @@ struct mmc_host {
 	unsigned long		private[0] ____cacheline_aligned;
 };
 
-extern struct mmc_host *mmc_alloc_host(int extra, struct device *);
-extern int mmc_add_host(struct mmc_host *);
-extern void mmc_remove_host(struct mmc_host *);
-extern void mmc_free_host(struct mmc_host *);
+struct mmc_host *mmc_alloc_host(int extra, struct device *);
+int mmc_add_host(struct mmc_host *);
+void mmc_remove_host(struct mmc_host *);
+void mmc_free_host(struct mmc_host *);
+void mmc_of_parse(struct mmc_host *host);
 
 static inline void *mmc_priv(struct mmc_host *host)
 {
@@ -357,16 +381,16 @@ static inline void *mmc_priv(struct mmc_host *host)
 #define mmc_classdev(x)	(&(x)->class_dev)
 #define mmc_hostname(x)	(dev_name(&(x)->class_dev))
 
-extern int mmc_suspend_host(struct mmc_host *);
-extern int mmc_resume_host(struct mmc_host *);
+int mmc_suspend_host(struct mmc_host *);
+int mmc_resume_host(struct mmc_host *);
 
-extern int mmc_power_save_host(struct mmc_host *host);
-extern int mmc_power_restore_host(struct mmc_host *host);
+int mmc_power_save_host(struct mmc_host *host);
+int mmc_power_restore_host(struct mmc_host *host);
 
-extern void mmc_detect_change(struct mmc_host *, unsigned long delay);
-extern void mmc_request_done(struct mmc_host *, struct mmc_request *);
+void mmc_detect_change(struct mmc_host *, unsigned long delay);
+void mmc_request_done(struct mmc_host *, struct mmc_request *);
 
-extern int mmc_cache_ctrl(struct mmc_host *, u8);
+int mmc_cache_ctrl(struct mmc_host *, u8);
 
 static inline void mmc_signal_sdio_irq(struct mmc_host *host)
 {
@@ -434,6 +458,19 @@ static inline int mmc_boot_partition_access(struct mmc_host *host)
 	return !(host->caps2 & MMC_CAP2_BOOTPART_NOACC);
 }
 
+static inline int mmc_host_uhs(struct mmc_host *host)
+{
+	return host->caps &
+		(MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 |
+		 MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 |
+		 MMC_CAP_UHS_DDR50);
+}
+
+static inline int mmc_host_packed_wr(struct mmc_host *host)
+{
+	return host->caps2 & MMC_CAP2_PACKED_WR;
+}
+
 #ifdef CONFIG_MMC_CLKGATE
 void mmc_host_clk_hold(struct mmc_host *host);
 void mmc_host_clk_release(struct mmc_host *host);

include/linux/mmc/mmc.h

@@ -139,7 +139,7 @@ static inline bool mmc_op_multi(u32 opcode)
 #define R1_CURRENT_STATE(x)	((x & 0x00001E00) >> 9)	/* sx, b (4 bits) */
 #define R1_READY_FOR_DATA	(1 << 8)	/* sx, a */
 #define R1_SWITCH_ERROR		(1 << 7)	/* sx, c */
-#define R1_EXCEPTION_EVENT	(1 << 6)	/* sx, a */
+#define R1_EXCEPTION_EVENT	(1 << 6)	/* sr, a */
 #define R1_APP_CMD		(1 << 5)	/* sr, c */
 
 #define R1_STATE_IDLE	0
@@ -275,7 +275,10 @@ struct _mmc_csd {
 #define EXT_CSD_FLUSH_CACHE		32      /* W */
 #define EXT_CSD_CACHE_CTRL		33      /* R/W */
 #define EXT_CSD_POWER_OFF_NOTIFICATION	34	/* R/W */
-#define EXT_CSD_EXP_EVENTS_STATUS	54	/* RO */
+#define EXT_CSD_PACKED_FAILURE_INDEX	35	/* RO */
+#define EXT_CSD_PACKED_CMD_STATUS	36	/* RO */
+#define EXT_CSD_EXP_EVENTS_STATUS	54	/* RO, 2 bytes */
+#define EXT_CSD_EXP_EVENTS_CTRL		56	/* R/W, 2 bytes */
 #define EXT_CSD_DATA_SECTOR_SIZE	61	/* R */
 #define EXT_CSD_GP_SIZE_MULT		143	/* R/W */
 #define EXT_CSD_PARTITION_ATTRIBUTE	156	/* R/W */
@@ -324,6 +327,8 @@ struct _mmc_csd {
 #define EXT_CSD_CACHE_SIZE		249	/* RO, 4 bytes */
 #define EXT_CSD_TAG_UNIT_SIZE		498	/* RO */
 #define EXT_CSD_DATA_TAG_SUPPORT	499	/* RO */
+#define EXT_CSD_MAX_PACKED_WRITES	500	/* RO */
+#define EXT_CSD_MAX_PACKED_READS	501	/* RO */
 #define EXT_CSD_BKOPS_SUPPORT		502	/* RO */
 #define EXT_CSD_HPI_FEATURES		503	/* RO */
 
@@ -385,6 +390,9 @@ struct _mmc_csd {
 #define EXT_CSD_PWR_CL_4BIT_MASK	0x0F	/* 8 bit PWR CLS */
 #define EXT_CSD_PWR_CL_8BIT_SHIFT	4
 #define EXT_CSD_PWR_CL_4BIT_SHIFT	0
+
+#define EXT_CSD_PACKED_EVENT_EN	BIT(3)
+
 /*
  * EXCEPTION_EVENT_STATUS field
  */
@@ -393,6 +401,9 @@ struct _mmc_csd {
 #define EXT_CSD_SYSPOOL_EXHAUSTED	BIT(2)
 #define EXT_CSD_PACKED_FAILURE		BIT(3)
 
+#define EXT_CSD_PACKED_GENERIC_ERROR	BIT(0)
+#define EXT_CSD_PACKED_INDEXED_ERROR	BIT(1)
+
 /*
  * BKOPS status level
  */

include/linux/mmc/sdhci.h

@@ -94,6 +94,7 @@ struct sdhci_host {
 #define SDHCI_QUIRK2_HOST_NO_CMD23			(1<<1)
 /* The system physically doesn't support 1.8v, even if the host does */
 #define SDHCI_QUIRK2_NO_1_8_V				(1<<2)
+#define SDHCI_QUIRK2_PRESET_VALUE_BROKEN		(1<<3)
 
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */

include/linux/mmc/sh_mobile_sdhi.h

@@ -4,7 +4,6 @@
 #include <linux/types.h>
 
 struct platform_device;
-struct tmio_mmc_data;
 
 #define SH_MOBILE_SDHI_IRQ_CARD_DETECT	"card_detect"
 #define SH_MOBILE_SDHI_IRQ_SDCARD	"sdcard"
@@ -26,7 +25,6 @@ struct sh_mobile_sdhi_info {
 	unsigned long tmio_caps2;
 	u32 tmio_ocr_mask;	/* available MMC voltages */
 	unsigned int cd_gpio;
-	struct tmio_mmc_data *pdata;
 	void (*set_pwr)(struct platform_device *pdev, int state);
 	int (*get_cd)(struct platform_device *pdev);
 

include/linux/platform_data/mmc-esdhc-imx.h

@@ -39,5 +39,6 @@ struct esdhc_platform_data {
 	unsigned int cd_gpio;
 	enum wp_types wp_type;
 	enum cd_types cd_type;
+	int max_bus_width;
 };
 #endif /* __ASM_ARCH_IMX_ESDHC_H */

include/linux/platform_data/mmc-sdhci-tegra.h

-/*
- * Copyright (C) 2009 Palm, Inc.
- * Author: Yvonne Yip <y@palm.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-#ifndef __PLATFORM_DATA_TEGRA_SDHCI_H
-#define __PLATFORM_DATA_TEGRA_SDHCI_H
-
-#include <linux/mmc/host.h>
-
-struct tegra_sdhci_platform_data {
-	int cd_gpio;
-	int wp_gpio;
-	int power_gpio;
-	int is_8bit;
-	int pm_flags;
-};
-
-#endif