Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (40 commits)
  Blackfin arch: Remove outdated code
  Blackfin arch: Fix udelay implementation
  Blackfin arch: Update Copyright information
  Blackfin arch: Add BF561 PPI POLS, POLC Masks
  Blackfin arch: Update CM-BF527 kernel config
  Blackfin arch: define bfin_memmap as static since it is only used here
  Blackfin arch: cplb mananger: use a do...while loop rather than a for loop
  Blackfin arch: fix bug - traps test case 19 for exception 0x2d fails
  Blackfin arch: add platform device bfin_mii-bus and KSZ8893M switch driver platform resources to board files
  Blackfin arch: build jtag tty driver as a module by default
  Blackfin arch: fix 2 bugs related to debug
  Blackfin arch: Add ANOMALY_05000380 to BF54x to kill the compile warning
  Blackfin arch: Fix bug - 561 SMP kernel can't boot from jffs2
  Blackfin arch: base SIC_IWR# programming on whether the MMR exists
  Blackfin arch: read SYSCR on newer parts that mirror the bits of SWRST in it
  Blackfin arch: fixup board init function name
  Blackfin arch: drop CONFIG_I2C_BOARDINFO ifdefs
  Blackfin arch: bfin_reset->_bfin_reset redirection no longer needed
  Blackfin arch: sync reboot handler with version in u-boot
  Blackfin arch: Faster Implementation of csum_tcpudp_nofold()
  ...

MAINTAINERS

@@ -911,7 +911,7 @@ S:	Maintained
 BLACKFIN ARCHITECTURE
 P:	Bryan Wu
 M:	cooloney@kernel.org
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 

arch/blackfin/Kconfig

@@ -169,26 +169,51 @@ config BF542
 	help
 	  BF542 Processor Support.
 
+config BF542M
+	bool "BF542m"
+	help
+	  BF542 Processor Support.
+
 config BF544
 	bool "BF544"
 	help
 	  BF544 Processor Support.
 
+config BF544M
+	bool "BF544m"
+	help
+	  BF544 Processor Support.
+
 config BF547
 	bool "BF547"
 	help
 	  BF547 Processor Support.
 
+config BF547M
+	bool "BF547m"
+	help
+	  BF547 Processor Support.
+
 config BF548
 	bool "BF548"
 	help
 	  BF548 Processor Support.
 
+config BF548M
+	bool "BF548m"
+	help
+	  BF548 Processor Support.
+
 config BF549
 	bool "BF549"
 	help
 	  BF549 Processor Support.
 
+config BF549M
+	bool "BF549m"
+	help
+	  BF549 Processor Support.
+
 config BF561
 	bool "BF561"
 	help
@@ -224,39 +249,39 @@ config TICK_SOURCE_SYSTMR0
 
 config BF_REV_MIN
 	int
-	default 0 if (BF51x || BF52x || BF54x)
+	default 0 if (BF51x || BF52x || (BF54x && !BF54xM))
 	default 2 if (BF537 || BF536 || BF534)
-	default 3 if (BF561 ||BF533 || BF532 || BF531)
+	default 3 if (BF561 || BF533 || BF532 || BF531 || BF54xM)
 	default 4 if (BF538 || BF539)
 
 config BF_REV_MAX
 	int
-	default 2 if (BF51x || BF52x || BF54x)
-	default 3 if (BF537 || BF536 || BF534)
+	default 2 if (BF51x || BF52x || (BF54x && !BF54xM))
+	default 3 if (BF537 || BF536 || BF534 || BF54xM)
 	default 5 if (BF561 || BF538 || BF539)
 	default 6 if (BF533 || BF532 || BF531)
 
 choice
 	prompt "Silicon Rev"
-	default BF_REV_0_1 if (BF51x || BF52x || BF54x)
+	default BF_REV_0_1 if (BF51x || BF52x || (BF54x && !BF54xM))
 	default BF_REV_0_2 if (BF534 || BF536 || BF537)
-	default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF561)
+	default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF54xM || BF561)
 
 config BF_REV_0_0
 	bool "0.0"
-	depends on (BF51x || BF52x || BF54x)
+	depends on (BF51x || BF52x || (BF54x && !BF54xM))
 
 config BF_REV_0_1
 	bool "0.1"
-	depends on (BF52x || BF54x)
+	depends on (BF52x || (BF54x && !BF54xM))
 
 config BF_REV_0_2
 	bool "0.2"
-	depends on (BF52x || BF537 || BF536 || BF534 || BF54x)
+	depends on (BF52x || BF537 || BF536 || BF534 || (BF54x && !BF54xM))
 
 config BF_REV_0_3
 	bool "0.3"
-	depends on (BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531)
+	depends on (BF54xM || BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531)
 
 config BF_REV_0_4
 	bool "0.4"
@@ -293,9 +318,14 @@ config BF53x
 	depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
 	default y
 
+config BF54xM
+	bool
+	depends on (BF542M || BF544M || BF547M || BF548M || BF549M)
+	default y
+
 config BF54x
 	bool
-	depends on (BF542 || BF544 || BF547 || BF548 || BF549)
+	depends on (BF542 || BF544 || BF547 || BF548 || BF549 || BF54xM)
 	default y
 
 config MEM_GENERIC_BOARD

arch/blackfin/Makefile

@@ -40,10 +40,15 @@ machine-$(CONFIG_BF537) := bf537
 machine-$(CONFIG_BF538)  := bf538
 machine-$(CONFIG_BF539)  := bf538
 machine-$(CONFIG_BF542)  := bf548
+machine-$(CONFIG_BF542M) := bf548
 machine-$(CONFIG_BF544)  := bf548
+machine-$(CONFIG_BF544M) := bf548
 machine-$(CONFIG_BF547)  := bf548
+machine-$(CONFIG_BF547M) := bf548
 machine-$(CONFIG_BF548)  := bf548
+machine-$(CONFIG_BF548M) := bf548
 machine-$(CONFIG_BF549)  := bf548
+machine-$(CONFIG_BF549M) := bf548
 machine-$(CONFIG_BF561)  := bf561
 MACHINE := $(machine-y)
 export MACHINE
@@ -67,10 +72,15 @@ cpu-$(CONFIG_BF537) := bf537
 cpu-$(CONFIG_BF538)  := bf538
 cpu-$(CONFIG_BF539)  := bf539
 cpu-$(CONFIG_BF542)  := bf542
+cpu-$(CONFIG_BF542M) := bf542m
 cpu-$(CONFIG_BF544)  := bf544
+cpu-$(CONFIG_BF544M) := bf544m
 cpu-$(CONFIG_BF547)  := bf547
+cpu-$(CONFIG_BF547M) := bf547m
 cpu-$(CONFIG_BF548)  := bf548
+cpu-$(CONFIG_BF548M) := bf548m
 cpu-$(CONFIG_BF549)  := bf549
+cpu-$(CONFIG_BF549M) := bf549m
 cpu-$(CONFIG_BF561)  := bf561
 
 rev-$(CONFIG_BF_REV_0_0)  := 0.0

arch/blackfin/configs/BF518F-EZBRD_defconfig

 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.28-rc2
+# Fri Jan  9 17:58:41 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -149,6 +150,7 @@ CONFIG_BF_REV_0_0=y
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF51x=y
+CONFIG_MEM_MT48LC32M8A2_75=y
 CONFIG_BFIN518F_EZBRD=y
 
 #
@@ -598,7 +600,10 @@ CONFIG_PHYLIB=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_BFIN_MAC is not set
+CONFIG_BFIN_MAC=y
+CONFIG_BFIN_TX_DESC_NUM=10
+CONFIG_BFIN_RX_DESC_NUM=20
+# CONFIG_BFIN_MAC_RMII is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
@@ -679,7 +684,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/BF526-EZBRD_defconfig

@@ -723,7 +723,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/BF527-EZKIT_defconfig

@@ -767,7 +767,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/BF533-EZKIT_defconfig

@@ -672,7 +672,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/BF533-STAMP_defconfig

@@ -679,7 +679,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/BF537-STAMP_defconfig

@@ -722,7 +722,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/BF538-EZKIT_defconfig

@@ -726,7 +726,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/BF548-EZKIT_defconfig

@@ -856,7 +856,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/BF561-EZKIT_defconfig

@@ -709,7 +709,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/include/asm/checksum.h

@@ -63,22 +63,22 @@ static inline __wsum
 csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
 		   unsigned short proto, __wsum sum)
 {
+	unsigned int carry;
 
-	__asm__ ("%0 = %0 + %1;\n\t"
+	__asm__ ("%0 = %0 + %2;\n\t"
 		"CC = AC0;\n\t"
-		 "if !CC jump 4;\n\t"
-		 "%0 = %0 + %4;\n\t"
-		 "%0 = %0 + %2;\n\t"
-		 "CC = AC0;\n\t"
-                 "if !CC jump 4;\n\t"
-                 "%0 = %0 + %4;\n\t"
+		"%1 = CC;\n\t"
+		"%0 = %0 + %1;\n\t"
 		"%0 = %0 + %3;\n\t"
 		"CC = AC0;\n\t"
-                 "if !CC jump 4;\n\t"
+		"%1 = CC;\n\t"
+		"%0 = %0 + %1;\n\t"
 		"%0 = %0 + %4;\n\t"
-                 "NOP;\n\t"
- 		 : "=d" (sum)
-		 : "d" (daddr), "d" (saddr), "d" ((ntohs(len)<<16)+proto*256), "d" (1), "0"(sum)
+		"CC = AC0;\n\t"
+		"%1 = CC;\n\t"
+		"%0 = %0 + %1;\n\t"
+		: "=d" (sum), "=&d" (carry)
+		: "d" (daddr), "d" (saddr), "d" ((len + proto) << 8), "0"(sum)
 		: "CC");
 
 	return (sum);

arch/blackfin/include/asm/delay.h

@@ -13,29 +13,7 @@
 
 static inline void __delay(unsigned long loops)
 {
-	if (ANOMALY_05000312) {
-		/* Interrupted loads to loop registers -> bad */
-		unsigned long tmp;
-		__asm__ __volatile__(
-			"[--SP] = LC0;"
-			"[--SP] = LT0;"
-			"[--SP] = LB0;"
-			"LSETUP (1f,1f) LC0 = %1;"
-			"1: NOP;"
-			/* We take advantage of the fact that LC0 is 0 at
-			 * the end of the loop.  Otherwise we'd need some
-			 * NOPs after the CLI here.
-			 */
-			"CLI %0;"
-			"LB0 = [SP++];"
-			"LT0 = [SP++];"
-			"LC0 = [SP++];"
-			"STI %0;"
-			: "=d" (tmp)
-			: "a" (loops)
-		);
-	} else
-		__asm__ __volatile__ (
+__asm__ __volatile__ (
 			"LSETUP(1f, 1f) LC0 = %0;"
 			"1: NOP;"
 			:
@@ -47,16 +25,15 @@ static inline void __delay(unsigned long loops)
 #include <linux/param.h>	/* needed for HZ */
 
 /*
- * Use only for very small delays ( < 1 msec).  Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays.  This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)
+ * close approximation borrowed from m68knommu to avoid 64-bit math
  */
+
+#define	HZSCALE		(268435456 / (1000000/HZ))
+
 static inline void udelay(unsigned long usecs)
 {
 	extern unsigned long loops_per_jiffy;
-	__delay(usecs * loops_per_jiffy / (1000000 / HZ));
+	__delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6);
 }
 
 #endif

arch/blackfin/include/asm/gpio.h

@@ -27,60 +27,6 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-/*
-*  Number     BF537/6/4    BF561    BF533/2/1
-*             BF527/5/2
-*
-*  GPIO_0       PF0         PF0        PF0
-*  GPIO_1       PF1         PF1        PF1
-*  GPIO_2       PF2         PF2        PF2
-*  GPIO_3       PF3         PF3        PF3
-*  GPIO_4       PF4         PF4        PF4
-*  GPIO_5       PF5         PF5        PF5
-*  GPIO_6       PF6         PF6        PF6
-*  GPIO_7       PF7         PF7        PF7
-*  GPIO_8       PF8         PF8        PF8
-*  GPIO_9       PF9         PF9        PF9
-*  GPIO_10      PF10        PF10       PF10
-*  GPIO_11      PF11        PF11       PF11
-*  GPIO_12      PF12        PF12       PF12
-*  GPIO_13      PF13        PF13       PF13
-*  GPIO_14      PF14        PF14       PF14
-*  GPIO_15      PF15        PF15       PF15
-*  GPIO_16      PG0         PF16
-*  GPIO_17      PG1         PF17
-*  GPIO_18      PG2         PF18
-*  GPIO_19      PG3         PF19
-*  GPIO_20      PG4         PF20
-*  GPIO_21      PG5         PF21
-*  GPIO_22      PG6         PF22
-*  GPIO_23      PG7         PF23
-*  GPIO_24      PG8         PF24
-*  GPIO_25      PG9         PF25
-*  GPIO_26      PG10        PF26
-*  GPIO_27      PG11        PF27
-*  GPIO_28      PG12        PF28
-*  GPIO_29      PG13        PF29
-*  GPIO_30      PG14        PF30
-*  GPIO_31      PG15        PF31
-*  GPIO_32      PH0         PF32
-*  GPIO_33      PH1         PF33
-*  GPIO_34      PH2         PF34
-*  GPIO_35      PH3         PF35
-*  GPIO_36      PH4         PF36
-*  GPIO_37      PH5         PF37
-*  GPIO_38      PH6         PF38
-*  GPIO_39      PH7         PF39
-*  GPIO_40      PH8         PF40
-*  GPIO_41      PH9         PF41
-*  GPIO_42      PH10        PF42
-*  GPIO_43      PH11        PF43
-*  GPIO_44      PH12        PF44
-*  GPIO_45      PH13        PF45
-*  GPIO_46      PH14        PF46
-*  GPIO_47      PH15        PF47
-*/
-
 #ifndef __ARCH_BLACKFIN_GPIO_H__
 #define __ARCH_BLACKFIN_GPIO_H__
 
@@ -295,10 +241,6 @@ int bfin_gpio_direction_output(unsigned gpio, int value);
 int bfin_gpio_get_value(unsigned gpio);
 void bfin_gpio_set_value(unsigned gpio, int value);
 
-#ifndef BF548_FAMILY
-#define bfin_gpio_set_value(gpio, value)    set_gpio_data(gpio, value)
-#endif
-
 #ifdef CONFIG_GPIOLIB
 #include <asm-generic/gpio.h>		/* cansleep wrappers */
 

arch/blackfin/include/asm/kgdb.h

-/*
- * File:         include/asm-blackfin/kgdb.h
- * Based on:
- * Author:       Sonic Zhang
- *
- * Created:
- * Description:
- *
- * Rev:          $Id: kgdb_bfin_linux-2.6.x.patch 4934 2007-02-13 09:32:11Z sonicz $
- *
- * Modified:
- *               Copyright 2005-2006 Analog Devices Inc.
+/* Blackfin KGDB header
  *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __ASM_BLACKFIN_KGDB_H__
@@ -37,10 +13,11 @@
 /* gdb locks */
 #define KGDB_MAX_NO_CPUS 8
 
-/************************************************************************/
-/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/
-/* at least NUMREGBYTES*2 are needed for register packets */
-/* Longer buffer is needed to list all threads */
+/*
+ * BUFMAX defines the maximum number of characters in inbound/outbound buffers.
+ * At least NUMREGBYTES*2 are needed for register packets.
+ * Longer buffer is needed to list all threads.
+ */
 #define BUFMAX 2048
 
 /*
@@ -126,7 +103,7 @@ enum regnames {
 
 static inline void arch_kgdb_breakpoint(void)
 {
-	asm("   EXCPT 2;");
+	asm("EXCPT 2;");
 }
 #define BREAK_INSTR_SIZE	2
 #define CACHE_FLUSH_IS_SAFE	1

arch/blackfin/include/asm/mem_init.h

@@ -115,7 +115,7 @@
 #define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
 
 /* Enable SCLK Out */
-#define mem_SDGCTL        (0x80000000 | SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
+#define mem_SDGCTL        (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
 #else
 #define mem_SDRRC 	CONFIG_MEM_SDRRC
 #define mem_SDGCTL	CONFIG_MEM_SDGCTL

arch/blackfin/include/asm/pda.h

@@ -59,6 +59,7 @@ struct blackfin_pda {			/* Per-processor Data Area */
 	unsigned long icplb_fault_addr;
 	unsigned long retx;
 	unsigned long seqstat;
+	unsigned int __nmi_count;	/* number of times NMI asserted on this CPU */
 };
 
 extern struct blackfin_pda cpu_pda[];

arch/blackfin/include/asm/reboot.h

@@ -15,6 +15,6 @@ extern void native_machine_halt(void);
 extern void native_machine_power_off(void);
 
 /* common reboot workarounds */
-extern void bfin_gpio_reset_spi0_ssel1(void);
+extern void bfin_reset_boot_spi_cs(unsigned short pin);
 
 #endif

arch/blackfin/kernel/Makefile

@@ -15,6 +15,8 @@ else
     obj-y += time.o
 endif
 
+CFLAGS_kgdb_test.o := -mlong-calls -O0
+
 obj-$(CONFIG_IPIPE)                  += ipipe.o
 obj-$(CONFIG_IPIPE_TRACE_MCOUNT)     += mcount.o
 obj-$(CONFIG_BFIN_GPTIMERS)          += gptimers.o

arch/blackfin/kernel/bfin_dma_5xx.c

@@ -249,6 +249,13 @@ static void __dma_memcpy(u32 daddr, s16 dmod, u32 saddr, s16 smod, size_t cnt, u
 
 	spin_lock_irqsave(&mdma_lock, flags);
 
+	/* Force a sync in case a previous config reset on this channel
+	 * occurred.  This is needed so subsequent writes to DMA registers
+	 * are not spuriously lost/corrupted.  Do it under irq lock and
+	 * without the anomaly version (because we are atomic already).
+	 */
+	__builtin_bfin_ssync();
+
 	if (bfin_read_MDMA_S0_CONFIG())
 		while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE))
 			continue;

arch/blackfin/kernel/cplb-mpu/cplbinit.c

@@ -63,10 +63,8 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
 	dcplb_tbl[cpu][i_d].addr = 0;
 	dcplb_tbl[cpu][i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
 
-#if 0
 	icplb_tbl[cpu][i_i].addr = 0;
-	icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_4KB;
-#endif
+	icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_1KB;
 
 	/* Cover kernel memory with 4M pages.  */
 	addr = 0;

arch/blackfin/kernel/cplb-nompu/cplbmgr.c

@@ -163,12 +163,14 @@ MGR_ATTR static int icplb_miss(int cpu)
 		nr_icplb_supv_miss[cpu]++;
 
 	base = 0;
-	for (idx = 0; idx < icplb_nr_bounds; idx++) {
+	idx = 0;
+	do {
 		eaddr = icplb_bounds[idx].eaddr;
 		if (addr < eaddr)
 			break;
 		base = eaddr;
-	}
+	} while (++idx < icplb_nr_bounds);
+
 	if (unlikely(idx == icplb_nr_bounds))
 		return CPLB_NO_ADDR_MATCH;
 
@@ -208,12 +210,14 @@ MGR_ATTR static int dcplb_miss(int cpu)
 		nr_dcplb_supv_miss[cpu]++;
 
 	base = 0;
-	for (idx = 0; idx < dcplb_nr_bounds; idx++) {
+	idx = 0;
+	do {
 		eaddr = dcplb_bounds[idx].eaddr;
 		if (addr < eaddr)
 			break;
 		base = eaddr;
-	}
+	} while (++idx < dcplb_nr_bounds);
+
 	if (unlikely(idx == dcplb_nr_bounds))
 		return CPLB_NO_ADDR_MATCH;
 

arch/blackfin/kernel/irqchip.c

@@ -35,6 +35,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <asm/trace.h>
+#include <asm/pda.h>
 
 static atomic_t irq_err_count;
 static spinlock_t irq_controller_lock;
@@ -91,8 +92,13 @@ int show_interrupts(struct seq_file *p, void *v)
 		seq_putc(p, '\n');
  skip:
 		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
-	} else if (i == NR_IRQS)
+	} else if (i == NR_IRQS) {
+		seq_printf(p, "NMI: ");
+		for_each_online_cpu(j)
+			seq_printf(p, "%10u ", cpu_pda[j].__nmi_count);
+		seq_printf(p, "     CORE  Non Maskable Interrupt\n");
 		seq_printf(p, "Err: %10u\n",  atomic_read(&irq_err_count));
+	}
 	return 0;
 }
 

arch/blackfin/kernel/reboot.c

@@ -20,8 +20,8 @@
  * reset while the Core B bit (on dual core parts) is cleared by
  * the core reset.
  */
-__attribute__((l1_text))
-static void _bfin_reset(void)
+__attribute__ ((__l1_text__, __noreturn__))
+static void bfin_reset(void)
 {
 	/* Wait for completion of "system" events such as cache line
 	 * line fills so that we avoid infinite stalls later on as
@@ -30,7 +30,11 @@ static void _bfin_reset(void)
 	 */
 	__builtin_bfin_ssync();
 
-	while (1) {
+	/* The bootrom checks to see how it was reset and will
+	 * automatically perform a software reset for us when
+	 * it starts executing after the core reset.
+	 */
+	if (ANOMALY_05000353 || ANOMALY_05000386) {
 		/* Initiate System software reset. */
 		bfin_write_SWRST(0x7);
 
@@ -50,6 +54,11 @@ static void _bfin_reset(void)
 		/* Clear System software reset */
 		bfin_write_SWRST(0);
 
+		/* The BF526 ROM will crash during reset */
+#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
+		bfin_read_SWRST();
+#endif
+
 		/* Wait for the SWRST write to complete.  Cannot rely on SSYNC
 		 * though as the System state is all reset now.
 		 */
@@ -60,22 +69,11 @@ static void _bfin_reset(void)
 			: "a" (15 * 1)
 			: "LC1", "LB1", "LT1"
 		);
+	}
 
+	while (1)
 		/* Issue core reset */
 		asm("raise 1");
-	}
-}
-
-static void bfin_reset(void)
-{
-	if (ANOMALY_05000353 || ANOMALY_05000386)
-		_bfin_reset();
-	else
-		/* the bootrom checks to see how it was reset and will
-		 * automatically perform a software reset for us when
-		 * it starts executing boot
-		 */
-		asm("raise 1;");
 }
 
 __attribute__((weak))

arch/blackfin/kernel/setup.c

@@ -60,7 +60,7 @@ void __initdata *init_retx, *init_saved_retx, *init_saved_seqstat,
 #define BFIN_MEMMAP_MAX		128 /* number of entries in bfin_memmap */
 #define BFIN_MEMMAP_RAM		1
 #define BFIN_MEMMAP_RESERVED	2
-struct bfin_memmap {
+static struct bfin_memmap {
 	int nr_map;
 	struct bfin_memmap_entry {
 		unsigned long long addr; /* start of memory segment */
@@ -824,7 +824,15 @@ void __init setup_arch(char **cmdline_p)
 	flash_probe();
 #endif
 
+	printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF);
+
+	/* Newer parts mirror SWRST bits in SYSCR */
+#if defined(CONFIG_BF53x) || defined(CONFIG_BF561) || \
+    defined(CONFIG_BF538) || defined(CONFIG_BF539)
 	_bfin_swrst = bfin_read_SWRST();
+#else
+	_bfin_swrst = bfin_read_SYSCR();
+#endif
 
 #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
 	bfin_write_SWRST(_bfin_swrst & ~DOUBLE_FAULT);
@@ -853,7 +861,7 @@ void __init setup_arch(char **cmdline_p)
 	else if (_bfin_swrst & RESET_SOFTWARE)
 		printk(KERN_NOTICE "Reset caused by Software reset\n");
 
-	printk(KERN_INFO "Blackfin support (C) 2004-2008 Analog Devices, Inc.\n");
+	printk(KERN_INFO "Blackfin support (C) 2004-2009 Analog Devices, Inc.\n");
 	if (bfin_compiled_revid() == 0xffff)
 		printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU);
 	else if (bfin_compiled_revid() == -1)

arch/blackfin/kernel/traps.c

@@ -673,6 +673,14 @@ static void decode_instruction(unsigned short *address)
 			verbose_printk("RTI");
 		else if (opcode == 0x0012)
 			verbose_printk("RTX");
+		else if (opcode == 0x0013)
+			verbose_printk("RTN");
+		else if (opcode == 0x0014)
+			verbose_printk("RTE");
+		else if (opcode == 0x0025)
+			verbose_printk("EMUEXCPT");
+		else if (opcode == 0x0040 && opcode <= 0x0047)
+			verbose_printk("STI R%i", opcode & 7);
 		else if (opcode >= 0x0050 && opcode <= 0x0057)
 			verbose_printk("JUMP (P%i)", opcode & 7);
 		else if (opcode >= 0x0060 && opcode <= 0x0067)
@@ -681,6 +689,10 @@ static void decode_instruction(unsigned short *address)
 			verbose_printk("CALL (PC+P%i)", opcode & 7);
 		else if (opcode >= 0x0080 && opcode <= 0x0087)
 			verbose_printk("JUMP (PC+P%i)", opcode & 7);
+		else if (opcode >= 0x0090 && opcode <= 0x009F)
+			verbose_printk("RAISE 0x%x", opcode & 0xF);
+		else if (opcode >= 0x00A0 && opcode <= 0x00AF)
+			verbose_printk("EXCPT 0x%x", opcode & 0xF);
 		else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF))
 			verbose_printk("IF !CC JUMP");
 		else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff))
@@ -820,11 +832,8 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 	decode_address(buf, (unsigned int)stack);
 	printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
 
-	addr = (unsigned int *)((unsigned int)stack & ~0x3F);
-
 	/* First thing is to look for a frame pointer */
-	for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
-		addr < endstack; addr++, i++) {
+	for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) {
 		if (*addr & 0x1)
 			continue;
 		ins_addr = (unsigned short *)*addr;
@@ -834,7 +843,8 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 
 		if (fp) {
 			/* Let's check to see if it is a frame pointer */
-			while (fp >= (addr - 1) && fp < endstack && fp)
+			while (fp >= (addr - 1) && fp < endstack
+			       && fp && ((unsigned int) fp & 0x3) == 0)
 				fp = (unsigned int *)*fp;
 			if (fp == 0 || fp == endstack) {
 				fp = addr - 1;
@@ -1052,8 +1062,9 @@ void show_regs(struct pt_regs *fp)
 	char buf [150];
 	struct irqaction *action;
 	unsigned int i;
-	unsigned long flags;
+	unsigned long flags = 0;
 	unsigned int cpu = smp_processor_id();
+	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
 
 	verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted());
 	verbose_printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  SYSCFG: %04lx\n",
@@ -1073,17 +1084,22 @@ void show_regs(struct pt_regs *fp)
 	}
 	verbose_printk(KERN_NOTICE "  EXCAUSE   : 0x%lx\n",
 		fp->seqstat & SEQSTAT_EXCAUSE);
-	for (i = 6; i <= 15 ; i++) {
+	for (i = 2; i <= 15 ; i++) {
 		if (fp->ipend & (1 << i)) {
+			if (i != 4) {
 				decode_address(buf, bfin_read32(EVT0 + 4*i));
 				verbose_printk(KERN_NOTICE "  physical IVG%i asserted : %s\n", i, buf);
+			} else
+				verbose_printk(KERN_NOTICE "  interrupts disabled\n");
 		}
 	}
 
 	/* if no interrupts are going off, don't print this out */
 	if (fp->ipend & ~0x3F) {
 		for (i = 0; i < (NR_IRQS - 1); i++) {
+			if (!in_atomic)
 				spin_lock_irqsave(&irq_desc[i].lock, flags);
+
 			action = irq_desc[i].action;
 			if (!action)
 				goto unlock;
@@ -1096,6 +1112,7 @@ void show_regs(struct pt_regs *fp)
 			}
 			verbose_printk("\n");
 unlock:
+			if (!in_atomic)
 				spin_unlock_irqrestore(&irq_desc[i].lock, flags);
 		}
 	}

arch/blackfin/mach-bf518/boards/ezbrd.c

@@ -46,6 +46,7 @@
 #include <asm/dpmc.h>
 #include <asm/bfin_sdh.h>
 #include <linux/spi/ad7877.h>
+#include <net/dsa.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -104,8 +105,31 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
+};
+#endif
+
+#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+static struct dsa_platform_data ksz8893m_switch_data = {
+	.mii_bus = &bfin_mii_bus.dev,
+	.netdev = &bfin_mac_device.dev,
+	.port_names[0]	= NULL,
+	.port_names[1]	= "eth%d",
+	.port_names[2]	= "eth%d",
+	.port_names[3]	= "cpu",
+};
+
+static struct platform_device ksz8893m_switch_device = {
+	.name		= "dsa",
+	.id		= 0,
+	.num_resources	= 0,
+	.dev.platform_data = &ksz8893m_switch_data,
 };
 #endif
 
@@ -147,6 +171,15 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_NET_DSA_KSZ8893M) \
+	|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+/* SPI SWITCH CHIP */
+static struct bfin5xx_spi_chip spi_switch_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
 #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
 static struct bfin5xx_spi_chip spi_mmc_chip_info = {
 	.enable_dma = 1,
@@ -226,6 +259,19 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
+#if defined(CONFIG_NET_DSA_KSZ8893M) \
+	|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+	{
+		.modalias = "ksz8893m",
+		.max_speed_hz = 5000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = NULL,
+		.controller_data = &spi_switch_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
 #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
 	{
 		.modalias = "spi_mmc_dummy",
@@ -473,7 +519,6 @@ static struct platform_device i2c_bfin_twi_device = {
 };
 #endif
 
-#ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
@@ -487,7 +532,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 	},
 #endif
 };
-#endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 static struct platform_device bfin_sport0_uart_device = {
@@ -584,9 +628,14 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif
 
+#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+	&ksz8893m_switch_device,
+#endif
+
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	&bfin_spi0_device,
 	&bfin_spi1_device,
@@ -632,12 +681,8 @@ static struct platform_device *stamp_devices[] __initdata = {
 static int __init ezbrd_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-
-#ifdef CONFIG_I2C_BOARDINFO
 	i2c_register_board_info(0, bfin_i2c_board_info,
 				ARRAY_SIZE(bfin_i2c_board_info));
-#endif
-
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 	return 0;
@@ -649,7 +694,7 @@ void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
 	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_gpio_reset_spi0_ssel1();
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
 }
 
 void bfin_get_ether_addr(char *addr)

arch/blackfin/mach-bf518/include/mach/portmux.h

@@ -103,6 +103,8 @@
 #define P_SPI1_SSEL4	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(2))
 #define P_SPI1_SSEL5	(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2))
 
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
+
 /* SPORT Port Mux */
 #define P_SPORT0_DRPRI	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0))
 #define P_SPORT0_RSCLK	(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0))

arch/blackfin/mach-bf527/boards/cm_bf527.c

@@ -403,8 +403,13 @@ static struct platform_device isp1362_hcd_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
 };
 #endif
 
@@ -793,7 +798,6 @@ static struct platform_device i2c_bfin_twi_device = {
 };
 #endif
 
-#ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
@@ -809,7 +813,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 	},
 #endif
 };
-#endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 static struct platform_device bfin_sport0_uart_device = {
@@ -920,6 +923,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif
 
@@ -968,27 +972,23 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_gpios_device,
 };
 
-static int __init stamp_init(void)
+static int __init cm_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-
-#ifdef CONFIG_I2C_BOARDINFO
 	i2c_register_board_info(0, bfin_i2c_board_info,
 				ARRAY_SIZE(bfin_i2c_board_info));
-#endif
-
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 	return 0;
 }
 
-arch_initcall(stamp_init);
+arch_initcall(cm_init);
 
 void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
 	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_gpio_reset_spi0_ssel1();
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
 }
 
 void bfin_get_ether_addr(char *addr)

arch/blackfin/mach-bf527/boards/ezbrd.c

@@ -208,8 +208,13 @@ static struct platform_device rtc_device = {
 
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
 };
 #endif
 
@@ -590,7 +595,6 @@ static struct platform_device i2c_bfin_twi_device = {
 };
 #endif
 
-#ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
@@ -604,7 +608,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 	},
 #endif
 };
-#endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 static struct platform_device bfin_sport0_uart_device = {
@@ -720,6 +723,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif
 
@@ -764,27 +768,23 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_gpios_device,
 };
 
-static int __init stamp_init(void)
+static int __init ezbrd_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-
-#ifdef CONFIG_I2C_BOARDINFO
 	i2c_register_board_info(0, bfin_i2c_board_info,
 				ARRAY_SIZE(bfin_i2c_board_info));
-#endif
-
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 	return 0;
 }
 
-arch_initcall(stamp_init);
+arch_initcall(ezbrd_init);
 
 void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
 	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_gpio_reset_spi0_ssel1();
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
 }
 
 void bfin_get_ether_addr(char *addr)

arch/blackfin/mach-bf527/boards/ezkit.c

@@ -425,8 +425,13 @@ static struct platform_device isp1362_hcd_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
 };
 #endif
 
@@ -830,7 +835,6 @@ static struct platform_device i2c_bfin_twi_device = {
 };
 #endif
 
-#ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
@@ -844,7 +848,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 	},
 #endif
 };
-#endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 static struct platform_device bfin_sport0_uart_device = {
@@ -988,6 +991,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif
 
@@ -1048,27 +1052,23 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_gpios_device,
 };
 
-static int __init stamp_init(void)
+static int __init ezkit_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-
-#ifdef CONFIG_I2C_BOARDINFO
 	i2c_register_board_info(0, bfin_i2c_board_info,
 				ARRAY_SIZE(bfin_i2c_board_info));
-#endif
-
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 	return 0;
 }
 
-arch_initcall(stamp_init);
+arch_initcall(ezkit_init);
 
 void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
 	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_gpio_reset_spi0_ssel1();
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
 }
 
 void bfin_get_ether_addr(char *addr)

arch/blackfin/mach-bf527/include/mach/portmux.h

@@ -73,6 +73,8 @@
 
 #define P_HWAIT		(P_DONTCARE)
 
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
+
 #define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
 #define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2))
 #define P_SPI0_SCK	(P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2))

arch/blackfin/mach-bf533/boards/blackstamp.c

@@ -309,10 +309,8 @@ static struct platform_device i2c_gpio_device = {
 };
 #endif
 
-#ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 };
-#endif
 
 static const unsigned int cclk_vlev_datasheet[] =
 {
@@ -390,10 +388,8 @@ static int __init blackstamp_init(void)
 
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 
-#ifdef CONFIG_I2C_BOARDINFO
 	i2c_register_board_info(0, bfin_i2c_board_info,
 				ARRAY_SIZE(bfin_i2c_board_info));
-#endif
 
 	ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	if (ret < 0)

arch/blackfin/mach-bf533/boards/stamp.c

@@ -441,7 +441,6 @@ static struct platform_device i2c_gpio_device = {
 };
 #endif
 
-#ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
 	{
@@ -461,7 +460,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 	},
 #endif
 };
-#endif
 
 static const unsigned int cclk_vlev_datasheet[] =
 {
@@ -550,10 +548,8 @@ static int __init stamp_init(void)
 
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 
-#ifdef CONFIG_I2C_BOARDINFO
 	i2c_register_board_info(0, bfin_i2c_board_info,
 				ARRAY_SIZE(bfin_i2c_board_info));
-#endif
 
 	ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	if (ret < 0)

arch/blackfin/mach-bf533/include/mach/portmux.h

@@ -54,14 +54,11 @@
 #define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PF2))
 #define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PF1))
 #define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PF0))
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
 
 #define P_TMR2		(P_DONTCARE)
 #define P_TMR1		(P_DONTCARE)
 #define P_TMR0		(P_DONTCARE)
 #define P_TMRCLK	(P_DEFINED | P_IDENT(GPIO_PF1))
 
-
-
-
-
 #endif /* _MACH_PORTMUX_H_ */

arch/blackfin/mach-bf537/boards/cm_bf537.c

@@ -479,8 +479,13 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
 };
 #endif
 
@@ -591,6 +596,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif
 

arch/blackfin/mach-bf537/boards/generic_board.c

@@ -262,8 +262,13 @@ static struct platform_device isp1362_hcd_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
 };
 #endif
 
@@ -662,6 +667,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif
 
@@ -708,7 +714,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 };
 
-static int __init stamp_init(void)
+static int __init generic_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
@@ -720,13 +726,13 @@ static int __init stamp_init(void)
 	return 0;
 }
 
-arch_initcall(stamp_init);
+arch_initcall(generic_init);
 
 void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
 	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_gpio_reset_spi0_ssel1();
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
 }
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)

arch/blackfin/mach-bf537/boards/minotaur.c

@@ -61,8 +61,13 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
 };
 #endif
 
@@ -324,6 +329,7 @@ static struct platform_device *minotaur_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif
 
@@ -377,5 +383,5 @@ void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
 	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_gpio_reset_spi0_ssel1();
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
 }

arch/blackfin/mach-bf537/boards/pnav10.c

@@ -198,8 +198,13 @@ static struct platform_device isp1362_hcd_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
 };
 #endif
 
@@ -529,6 +534,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif
 
@@ -558,7 +564,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 };
 
-static int __init stamp_init(void)
+static int __init pnav_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
@@ -569,7 +575,7 @@ static int __init stamp_init(void)
 	return 0;
 }
 
-arch_initcall(stamp_init);
+arch_initcall(pnav_init);
 
 void bfin_get_ether_addr(char *addr)
 {

arch/blackfin/mach-bf537/boards/stamp.c

@@ -321,8 +321,13 @@ static struct platform_device isp1362_hcd_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
 };
 #endif
 
@@ -1068,7 +1073,6 @@ static struct adp5588_kpad_platform_data adp5588_kpad_data = {
 };
 #endif
 
-#ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
 	{
@@ -1102,7 +1106,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 	},
 #endif
 };
-#endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 static struct platform_device bfin_sport0_uart_device = {
@@ -1217,6 +1220,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif
 
@@ -1284,12 +1288,8 @@ static struct platform_device *stamp_devices[] __initdata = {
 static int __init stamp_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-
-#ifdef CONFIG_I2C_BOARDINFO
 	i2c_register_board_info(0, bfin_i2c_board_info,
 				ARRAY_SIZE(bfin_i2c_board_info));
-#endif
-
 	bfin_plat_nand_init();
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
@@ -1307,7 +1307,7 @@ void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
 	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_gpio_reset_spi0_ssel1();
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
 }
 
 /*

arch/blackfin/mach-bf537/boards/tcm_bf537.c

@@ -481,8 +481,13 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
 };
 #endif
 
@@ -593,6 +598,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif
 
@@ -615,7 +621,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 	&bfin_gpios_device,
 };
 
-static int __init cm_bf537_init(void)
+static int __init tcm_bf537_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
@@ -629,7 +635,7 @@ static int __init cm_bf537_init(void)
 	return 0;
 }
 
-arch_initcall(cm_bf537_init);
+arch_initcall(tcm_bf537_init);
 
 void bfin_get_ether_addr(char *addr)
 {

arch/blackfin/mach-bf537/include/mach/portmux.h

@@ -31,6 +31,7 @@
 #define P_PPI0_FS1	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
 #define P_TACLK0	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
 #define P_TMRCLK	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
 
 #define P_PPI0_D0	(P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0))
 #define P_PPI0_D1	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))

arch/blackfin/mach-bf538/include/mach/portmux.h

@@ -102,5 +102,6 @@
 #define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PF2))
 #define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PF1))
 #define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PF0))
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
 
 #endif /* _MACH_PORTMUX_H_ */

arch/blackfin/mach-bf548/boards/ezkit.c

@@ -781,7 +781,6 @@ static struct platform_device i2c_bfin_twi1_device = {
 #endif
 #endif
 
-#ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
 };
 
@@ -800,7 +799,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
 #endif
 };
 #endif
-#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/gpio_keys.h>
@@ -956,13 +954,11 @@ static int __init ezkit_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 
-#ifdef CONFIG_I2C_BOARDINFO
 	i2c_register_board_info(0, bfin_i2c_board_info0,
 				ARRAY_SIZE(bfin_i2c_board_info0));
 #if !defined(CONFIG_BF542)	/* The BF542 only has 1 TWI */
 	i2c_register_board_info(1, bfin_i2c_board_info1,
 				ARRAY_SIZE(bfin_i2c_board_info1));
-#endif
 #endif
 
 	platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));

arch/blackfin/mach-bf548/include/mach/anomaly.h

@@ -175,6 +175,7 @@
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)

arch/blackfin/mach-bf548/include/mach/bf548.h

@@ -104,6 +104,18 @@
 
 #define AMGCTLVAL	(V_AMBEN | V_AMCKEN)
 
+#if defined(CONFIG_BF542M)
+# define CONFIG_BF542
+#elif defined(CONFIG_BF544M)
+# define CONFIG_BF544
+#elif defined(CONFIG_BF547M)
+# define CONFIG_BF547
+#elif defined(CONFIG_BF548M)
+# define CONFIG_BF548
+#elif defined(CONFIG_BF549M)
+# define CONFIG_BF549
+#endif
+
 #if defined(CONFIG_BF542)
 # define CPU   "BF542"
 # define CPUID 0x27de

arch/blackfin/mach-bf548/include/mach/gpio.h

@@ -195,17 +195,17 @@
 struct gpio_port_t {
 	unsigned short port_fer;
 	unsigned short dummy1;
-	unsigned short port_data;
+	unsigned short data;
 	unsigned short dummy2;
-	unsigned short port_set;
+	unsigned short data_set;
 	unsigned short dummy3;
-	unsigned short port_clear;
+	unsigned short data_clear;
 	unsigned short dummy4;
-	unsigned short port_dir_set;
+	unsigned short dir_set;
 	unsigned short dummy5;
-	unsigned short port_dir_clear;
+	unsigned short dir_clear;
 	unsigned short dummy6;
-	unsigned short port_inen;
+	unsigned short inen;
 	unsigned short dummy7;
 	unsigned int port_mux;
 };

arch/blackfin/mach-bf548/include/mach/portmux.h

@@ -125,6 +125,7 @@
 #define P_KEY_COL2	(P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(3))
 #define P_KEY_COL3	(P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(3))
 
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
 #define P_SPI0_SCK	(P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0))
 #define P_SPI0_MISO	(P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0))
 #define P_SPI0_MOSI	(P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(0))

arch/blackfin/mach-bf561/include/mach/defBF561.h

@@ -1106,6 +1106,8 @@
 #define DLEN_8		     0x0	/* PPI Data Length mask for DLEN=8 */
 #define DLEN(x)	(((x-9) & 0x07) << 11)	/* PPI Data Length (only works for x=10-->x=16) */
 #define POL                  0x0000C000	/* PPI Signal Polarities       */
+#define	POLC		0x4000		/* PPI Clock Polarity */
+#define	POLS		0x8000		/* PPI Frame Sync Polarity */
 
 /* PPI_STATUS Masks */
 #define FLD	             0x00000400	/* Field Indicator   */

arch/blackfin/mach-bf561/include/mach/portmux.h

@@ -85,5 +85,6 @@
 #define P_SPI0_MOSI	(P_DONTCARE)
 #define P_SPI0_MISO	(P_DONTCARE)
 #define P_SPI0_SCK	(P_DONTCARE)
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
 
 #endif /* _MACH_PORTMUX_H_ */

arch/blackfin/mach-common/clocks-init.c

@@ -14,6 +14,7 @@
 #include <asm/clocks.h>
 #include <asm/mem_init.h>
 
+#define SDGCTL_WIDTH (1 << 31)	/* SDRAM external data path width */
 #define PLL_CTL_VAL \
 	(((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \
 	 (PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0))
@@ -76,7 +77,7 @@ void init_clocks(void)
 	bfin_write_PLL_DIV(CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
 #ifdef EBIU_SDGCTL
 	bfin_write_EBIU_SDRRC(mem_SDRRC);
-	bfin_write_EBIU_SDGCTL(mem_SDGCTL);
+	bfin_write_EBIU_SDGCTL((bfin_read_EBIU_SDGCTL() & SDGCTL_WIDTH) | mem_SDGCTL);
 #else
 	bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ));
 	do_sync();

arch/blackfin/mach-common/entry.S

@@ -151,13 +151,6 @@ ENTRY(_ex_syscall)
 	jump.s _bfin_return_from_exception;
 ENDPROC(_ex_syscall)
 
-ENTRY(_ex_soft_bp)
-	r7 = retx;
-	r7 += -2;
-	retx = r7;
-	jump.s _ex_trap_c;
-ENDPROC(_ex_soft_bp)
-
 ENTRY(_ex_single_step)
 	/* If we just returned from an interrupt, the single step event is
 	   for the RTI instruction.  */
@@ -1087,7 +1080,7 @@ ENTRY(_ex_table)
 	 * EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined
 	 */
 	.long _ex_syscall       /* 0x00 - User Defined - Linux Syscall */
-	.long _ex_soft_bp       /* 0x01 - User Defined - Software breakpoint */
+	.long _ex_trap_c        /* 0x01 - User Defined - Software breakpoint */
 #ifdef	CONFIG_KGDB
 	.long _ex_trap_c	/* 0x02 - User Defined - KGDB initial connection
 							 and break signal trap */

arch/blackfin/mach-common/head.S

@@ -17,6 +17,19 @@
 
 __INIT
 
+ENTRY(__init_clear_bss)
+	r2 = r2 - r1;
+	cc = r2 == 0;
+	if cc jump .L_bss_done;
+	r2 >>= 2;
+	p1 = r1;
+	p2 = r2;
+	lsetup (1f, 1f) lc0 = p2;
+1:	[p1++] = r0;
+.L_bss_done:
+	rts;
+ENDPROC(__init_clear_bss)
+
 #define INITIAL_STACK	(L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
 
 ENTRY(__start)
@@ -144,6 +157,35 @@ ENTRY(__start)
 	call _init_early_exception_vectors;
 #endif
 
+	r0 = 0 (x);
+	/* Zero out all of the fun bss regions */
+#if L1_DATA_A_LENGTH > 0
+	r1.l = __sbss_l1;
+	r1.h = __sbss_l1;
+	r2.l = __ebss_l1;
+	r2.h = __ebss_l1;
+	call __init_clear_bss
+#endif
+#if L1_DATA_B_LENGTH > 0
+	r1.l = __sbss_b_l1;
+	r1.h = __sbss_b_l1;
+	r2.l = __ebss_b_l1;
+	r2.h = __ebss_b_l1;
+	call __init_clear_bss
+#endif
+#if L2_LENGTH > 0
+	r1.l = __sbss_l2;
+	r1.h = __sbss_l2;
+	r2.l = __ebss_l2;
+	r2.h = __ebss_l2;
+	call __init_clear_bss
+#endif
+	r1.l = ___bss_start;
+	r1.h = ___bss_start;
+	r2.l = ___bss_stop;
+	r2.h = ___bss_stop;
+	call __init_clear_bss
+
 	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
 	call _bfin_relocate_l1_mem;
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
@@ -185,19 +227,6 @@ ENDPROC(__start)
 # define WDOG_CTL WDOGA_CTL
 #endif
 
-ENTRY(__init_clear_bss)
-	r2 = r2 - r1;
-	cc = r2 == 0;
-	if cc jump .L_bss_done;
-	r2 >>= 2;
-	p1 = r1;
-	p2 = r2;
-	lsetup (1f, 1f) lc0 = p2;
-1:	[p1++] = r0;
-.L_bss_done:
-	rts;
-ENDPROC(__init_clear_bss)
-
 ENTRY(_real_start)
 	/* Enable nested interrupts */
 	[--sp] = reti;
@@ -209,35 +238,6 @@ ENTRY(_real_start)
 	w[p0] = r0;
 	ssync;
 
-	r0 = 0 (x);
-	/* Zero out all of the fun bss regions */
-#if L1_DATA_A_LENGTH > 0
-	r1.l = __sbss_l1;
-	r1.h = __sbss_l1;
-	r2.l = __ebss_l1;
-	r2.h = __ebss_l1;
-	call __init_clear_bss
-#endif
-#if L1_DATA_B_LENGTH > 0
-	r1.l = __sbss_b_l1;
-	r1.h = __sbss_b_l1;
-	r2.l = __ebss_b_l1;
-	r2.h = __ebss_b_l1;
-	call __init_clear_bss
-#endif
-#if L2_LENGTH > 0
-	r1.l = __sbss_l2;
-	r1.h = __sbss_l2;
-	r2.l = __ebss_l2;
-	r2.h = __ebss_l2;
-	call __init_clear_bss
-#endif
-	r1.l = ___bss_start;
-	r1.h = ___bss_start;
-	r2.l = ___bss_stop;
-	r2.h = ___bss_stop;
-	call __init_clear_bss
-
 	/* Pass the u-boot arguments to the global value command line */
 	R0 = R7;
 	call _cmdline_init;

arch/blackfin/mach-common/interrupt.S

@@ -195,7 +195,7 @@ ENDPROC(_evt_ivhw)
 /* Interrupt routine for evt2 (NMI).
  * We don't actually use this, so just return.
  * For inner circle type details, please see:
- * http://docs.blackfin.uclinux.org/doku.php?id=linux:nmi
+ * http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:nmi
  */
 ENTRY(_evt_nmi)
 .weak _evt_nmi

arch/blackfin/mach-common/ints-priority.c

@@ -1101,10 +1101,9 @@ int __init init_arch_irq(void)
 	    IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
 	    IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
 
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) \
-	|| defined(BF538_FAMILY) || defined(CONFIG_BF51x)
+#ifdef SIC_IWR0
 	bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
-#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
+# ifdef SIC_IWR1
 	/* BF52x/BF51x system reset does not properly reset SIC_IWR1 which
 	 * will screw up the bootrom as it relies on MDMA0/1 waking it
 	 * up from IDLE instructions.  See this report for more info:
@@ -1114,10 +1113,8 @@ int __init init_arch_irq(void)
 		bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
 	else
 		bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
-#else
-	bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
-#endif
-# ifdef CONFIG_BF54x
+# endif
+# ifdef SIC_IWR2
 	bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
 # endif
 #else

arch/blackfin/mach-common/pm.c

@@ -82,10 +82,9 @@ void bfin_pm_suspend_standby_enter(void)
 
 	bfin_pm_standby_restore();
 
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)  || defined(CONFIG_BF561) || \
-	defined(CONFIG_BF538) || defined(CONFIG_BF539) || defined(CONFIG_BF51x)
+#ifdef SIC_IWR0
 	bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
-#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
+# ifdef SIC_IWR1
 	/* BF52x system reset does not properly reset SIC_IWR1 which
 	 * will screw up the bootrom as it relies on MDMA0/1 waking it
 	 * up from IDLE instructions.  See this report for more info:
@@ -95,10 +94,8 @@ void bfin_pm_suspend_standby_enter(void)
 		bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
 	else
 		bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
-#else
-	bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
-#endif
-# ifdef CONFIG_BF54x
+# endif
+# ifdef SIC_IWR2
 	bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
 # endif
 #else