Skip to content

L
linux
Commit edabd38e authored by Saeed Bishara's avatar Saeed Bishara Committed by Nicolas Pitre
Browse files
Options

ARM: add base support for Marvell Dove SoC 

The Marvell Dove (88AP510) is a high-performance, highly integrated,
low power SoC with high-end ARM-compatible processor (known as PJ4),
graphics processing unit, high-definition video decoding acceleration
hardware, and a broad range of peripherals.
Signed-off-by: default avatarLennert Buytenhek <buytenh@marvell.com>
Signed-off-by: default avatarSaeed Bishara <saeed@marvell.com>
Signed-off-by: default avatarNicolas Pitre <nico@marvell.com>
parent 8d27b2f7
Hide whitespace changes
Inline Side-by-side
Showing with 3773 additions and 2 deletions
arch/arm/Kconfig
View file @ edabd38e
...@@ -433,6 +433,17 @@ config ARCH_L7200 ...@@ -433,6 +433,17 @@ config ARCH_L7200
If you have any questions or comments about the Linux kernel port If you have any questions or comments about the Linux kernel port
to this board, send e-mail to <sjhill@cotw.com>. to this board, send e-mail to <sjhill@cotw.com>.
config ARCH_DOVE
bool "Marvell Dove"
select PCI
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
help
Support for the Marvell Dove SoC 88AP510
config ARCH_KIRKWOOD config ARCH_KIRKWOOD
bool "Marvell Kirkwood" bool "Marvell Kirkwood"
select CPU_FEROCEON select CPU_FEROCEON
...@@ -747,6 +758,8 @@ source "arch/arm/mach-orion5x/Kconfig" ...@@ -747,6 +758,8 @@ source "arch/arm/mach-orion5x/Kconfig"
source "arch/arm/mach-kirkwood/Kconfig" source "arch/arm/mach-kirkwood/Kconfig"
source "arch/arm/mach-dove/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s3c64xx/Kconfig" source "arch/arm/plat-s3c64xx/Kconfig"
source "arch/arm/plat-s3c/Kconfig" source "arch/arm/plat-s3c/Kconfig"
......
arch/arm/Makefile
View file @ edabd38e
...@@ -122,6 +122,7 @@ machine-$(CONFIG_ARCH_AT91) := at91 ...@@ -122,6 +122,7 @@ machine-$(CONFIG_ARCH_AT91) := at91
machine-$(CONFIG_ARCH_BCMRING) := bcmring machine-$(CONFIG_ARCH_BCMRING) := bcmring
machine-$(CONFIG_ARCH_CLPS711X) := clps711x machine-$(CONFIG_ARCH_CLPS711X) := clps711x
machine-$(CONFIG_ARCH_DAVINCI) := davinci machine-$(CONFIG_ARCH_DAVINCI) := davinci
machine-$(CONFIG_ARCH_DOVE) := dove
machine-$(CONFIG_ARCH_EBSA110) := ebsa110 machine-$(CONFIG_ARCH_EBSA110) := ebsa110
machine-$(CONFIG_ARCH_EP93XX) := ep93xx machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_GEMINI) := gemini machine-$(CONFIG_ARCH_GEMINI) := gemini
......
arch/arm/boot/compressed/head.S
View file @ edabd38e
...@@ -743,6 +743,12 @@ proc_types: ...@@ -743,6 +743,12 @@ proc_types:
W(b) __armv4_mmu_cache_off W(b) __armv4_mmu_cache_off
W(b) __armv6_mmu_cache_flush W(b) __armv6_mmu_cache_flush
.word 0x560f5810 @ Marvell PJ4 ARMv6
.word 0xff0ffff0
W(b) __armv4_mmu_cache_on
W(b) __armv4_mmu_cache_off
W(b) __armv6_mmu_cache_flush
.word 0x000f0000 @ new CPU Id .word 0x000f0000 @ new CPU Id
.word 0x000f0000 .word 0x000f0000
W(b) __armv7_mmu_cache_on W(b) __armv7_mmu_cache_on
......
arch/arm/configs/dove_defconfig 0 → 100644
View file @ edabd38e
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.32-rc6
# Tue Nov 24 13:48:39 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
#
# Kernel Performance Events And Counters
#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_FREEZER is not set
#
# System Type
#
CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
CONFIG_ARCH_DOVE=y
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_BCMRING is not set
#
# Marvell Dove Implementations
#
CONFIG_MACH_DOVE_DB=y
CONFIG_PLAT_ORION=y
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_V6=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v6=y
CONFIG_CPU_ABRT_EV6=y
CONFIG_CPU_PABRT_V6=y
CONFIG_CPU_CACHE_V6=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V6=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
# CONFIG_ARM_ERRATA_411920 is not set
#
# Bus support
#
CONFIG_PCI=y
CONFIG_PCI_SYSCALL=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE=""
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
#
# CPU Power Management
#
# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
# CONFIG_FPE_NWFPE is not set
# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
CONFIG_MTD_M25P80=y
CONFIG_M25PXX_USE_FAST_READ=y
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set
#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=1
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
CONFIG_SATA_MV=y
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MV64XXX=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_ORION=y
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
#
# Memory mapped GPIO expanders:
#
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
#
# AC97 GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
#
# DMA Devices
#
CONFIG_MV_XOR=y
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
# CONFIG_NET_DMA is not set
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_UBIFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_LL is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_BLOWFISH=y
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_MV_CESA is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
arch/arm/mach-dove/Kconfig 0 → 100644
View file @ edabd38e
if ARCH_DOVE
menu "Marvell Dove Implementations"
config MACH_DOVE_DB
bool "Marvell DB-MV88AP510 Development Board"
select I2C_BOARDINFO
help
Say 'Y' here if you want your kernel to support the
Marvell DB-MV88AP510 Development Board.
endmenu
endif
arch/arm/mach-dove/Makefile 0 → 100644
View file @ edabd38e
obj-y += common.o addr-map.o irq.o pcie.o
obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o
arch/arm/mach-dove/Makefile.boot 0 → 100644
View file @ edabd38e
zreladdr-y := 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
arch/arm/mach-dove/addr-map.c 0 → 100644
View file @ edabd38e
/*
* arch/arm/mach-dove/addr-map.c
*
* Address map functions for Marvell Dove 88AP510 SoC
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/setup.h>
#include "common.h"
/*
* Generic Address Decode Windows bit settings
*/
#define TARGET_DDR 0x0
#define TARGET_BOOTROM 0x1
#define TARGET_CESA 0x3
#define TARGET_PCIE0 0x4
#define TARGET_PCIE1 0x8
#define TARGET_SCRATCHPAD 0xd
#define ATTR_CESA 0x01
#define ATTR_BOOTROM 0xfd
#define ATTR_DEV_SPI0_ROM 0xfe
#define ATTR_DEV_SPI1_ROM 0xfb
#define ATTR_PCIE_IO 0xe0
#define ATTR_PCIE_MEM 0xe8
#define ATTR_SCRATCHPAD 0x0
/*
* CPU Address Decode Windows registers
*/
#define WIN_CTRL(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x0)
#define WIN_BASE(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x4)
#define WIN_REMAP_LO(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x8)
#define WIN_REMAP_HI(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0xc)
struct mbus_dram_target_info dove_mbus_dram_info;
static inline void __iomem *ddr_map_sc(int i)
{
return (void __iomem *)(DOVE_MC_VIRT_BASE + 0x100 + ((i) << 4));
}
static int cpu_win_can_remap(int win)
{
if (win < 4)
return 1;
return 0;
}
static void __init setup_cpu_win(int win, u32 base, u32 size,
u8 target, u8 attr, int remap)
{
u32 ctrl;
base &= 0xffff0000;
ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
writel(base, WIN_BASE(win));
writel(ctrl, WIN_CTRL(win));
if (cpu_win_can_remap(win)) {
if (remap < 0)
remap = base;
writel(remap & 0xffff0000, WIN_REMAP_LO(win));
writel(0, WIN_REMAP_HI(win));
}
}
void __init dove_setup_cpu_mbus(void)
{
int i;
int cs;
/*
* First, disable and clear windows.
*/
for (i = 0; i < 8; i++) {
writel(0, WIN_BASE(i));
writel(0, WIN_CTRL(i));
if (cpu_win_can_remap(i)) {
writel(0, WIN_REMAP_LO(i));
writel(0, WIN_REMAP_HI(i));
}
}
/*
* Setup windows for PCIe IO+MEM space.
*/
setup_cpu_win(0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE,
TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE);
setup_cpu_win(1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE,
TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE);
setup_cpu_win(2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE,
TARGET_PCIE0, ATTR_PCIE_MEM, -1);
setup_cpu_win(3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE,
TARGET_PCIE1, ATTR_PCIE_MEM, -1);
/*
* Setup window for CESA engine.
*/
setup_cpu_win(4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE,
TARGET_CESA, ATTR_CESA, -1);
/*
* Setup the Window to the BootROM for Standby and Sleep Resume
*/
setup_cpu_win(5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE,
TARGET_BOOTROM, ATTR_BOOTROM, -1);
/*
* Setup the Window to the PMU Scratch Pad space
*/
setup_cpu_win(6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE,
TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1);
/*
* Setup MBUS dram target info.
*/
dove_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
for (i = 0, cs = 0; i < 2; i++) {
u32 map = readl(ddr_map_sc(i));
/*
* Chip select enabled?
*/
if (map & 1) {
struct mbus_dram_window *w;
w = &dove_mbus_dram_info.cs[cs++];
w->cs_index = i;
w->mbus_attr = 0; /* CS address decoding done inside */
/* the DDR controller, no need to */
/* provide attributes */
w->base = map & 0xff800000;
w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4);
}
}
dove_mbus_dram_info.num_cs = cs;
}
arch/arm/mach-dove/common.c 0 → 100644
View file @ edabd38e
/*
* arch/arm/mach-dove/common.c
*
* Core functions for Marvell Dove 88AP510 System On Chip
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/serial_8250.h>
#include <linux/clk.h>
#include <linux/mbus.h>
#include <linux/mv643xx_eth.h>
#include <linux/mv643xx_i2c.h>
#include <linux/ata_platform.h>
#include <linux/spi/orion_spi.h>
#include <linux/gpio.h>
#include <asm/page.h>
#include <asm/setup.h>
#include <asm/timex.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/mach/pci.h>
#include <mach/dove.h>
#include <mach/bridge-regs.h>
#include <asm/mach/arch.h>
#include <linux/irq.h>
#include <plat/mv_xor.h>
#include <plat/ehci-orion.h>
#include <plat/time.h>
#include "common.h"
/*****************************************************************************
* I/O Address Mapping
****************************************************************************/
static struct map_desc dove_io_desc[] __initdata = {
{
.virtual = DOVE_SB_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE),
.length = DOVE_SB_REGS_SIZE,
.type = MT_DEVICE,
}, {
.virtual = DOVE_NB_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE),
.length = DOVE_NB_REGS_SIZE,
.type = MT_DEVICE,
}, {
.virtual = DOVE_PCIE0_IO_VIRT_BASE,
.pfn = __phys_to_pfn(DOVE_PCIE0_IO_PHYS_BASE),
.length = DOVE_PCIE0_IO_SIZE,
.type = MT_DEVICE,
}, {
.virtual = DOVE_PCIE1_IO_VIRT_BASE,
.pfn = __phys_to_pfn(DOVE_PCIE1_IO_PHYS_BASE),
.length = DOVE_PCIE1_IO_SIZE,
.type = MT_DEVICE,
},
};
void __init dove_map_io(void)
{
iotable_init(dove_io_desc, ARRAY_SIZE(dove_io_desc));
}
/*****************************************************************************
* EHCI
****************************************************************************/
static struct orion_ehci_data dove_ehci_data = {
.dram = &dove_mbus_dram_info,
.phy_version = EHCI_PHY_NA,
};
static u64 ehci_dmamask = DMA_BIT_MASK(32);
/*****************************************************************************
* EHCI0
****************************************************************************/
static struct resource dove_ehci0_resources[] = {
{
.start = DOVE_USB0_PHYS_BASE,
.end = DOVE_USB0_PHYS_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_DOVE_USB0,
.end = IRQ_DOVE_USB0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dove_ehci0 = {
.name = "orion-ehci",
.id = 0,
.dev = {
.dma_mask = &ehci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &dove_ehci_data,
},
.resource = dove_ehci0_resources,
.num_resources = ARRAY_SIZE(dove_ehci0_resources),
};
void __init dove_ehci0_init(void)
{
platform_device_register(&dove_ehci0);
}
/*****************************************************************************
* EHCI1
****************************************************************************/
static struct resource dove_ehci1_resources[] = {
{
.start = DOVE_USB1_PHYS_BASE,
.end = DOVE_USB1_PHYS_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_DOVE_USB1,
.end = IRQ_DOVE_USB1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dove_ehci1 = {
.name = "orion-ehci",
.id = 1,
.dev = {
.dma_mask = &ehci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &dove_ehci_data,
},
.resource = dove_ehci1_resources,
.num_resources = ARRAY_SIZE(dove_ehci1_resources),
};
void __init dove_ehci1_init(void)
{
platform_device_register(&dove_ehci1);
}
/*****************************************************************************
* GE00
****************************************************************************/
struct mv643xx_eth_shared_platform_data dove_ge00_shared_data = {
.t_clk = 0,
.dram = &dove_mbus_dram_info,
};
static struct resource dove_ge00_shared_resources[] = {
{
.name = "ge00 base",
.start = DOVE_GE00_PHYS_BASE + 0x2000,
.end = DOVE_GE00_PHYS_BASE + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device dove_ge00_shared = {
.name = MV643XX_ETH_SHARED_NAME,
.id = 0,
.dev = {
.platform_data = &dove_ge00_shared_data,
},
.num_resources = 1,
.resource = dove_ge00_shared_resources,
};
static struct resource dove_ge00_resources[] = {
{
.name = "ge00 irq",
.start = IRQ_DOVE_GE00_SUM,
.end = IRQ_DOVE_GE00_SUM,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dove_ge00 = {
.name = MV643XX_ETH_NAME,
.id = 0,
.num_resources = 1,
.resource = dove_ge00_resources,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
{
eth_data->shared = &dove_ge00_shared;
dove_ge00.dev.platform_data = eth_data;
platform_device_register(&dove_ge00_shared);
platform_device_register(&dove_ge00);
}
/*****************************************************************************
* SoC RTC
****************************************************************************/
static struct resource dove_rtc_resource[] = {
{
.start = DOVE_RTC_PHYS_BASE,
.end = DOVE_RTC_PHYS_BASE + 32 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_DOVE_RTC,
.flags = IORESOURCE_IRQ,
}
};
void __init dove_rtc_init(void)
{
platform_device_register_simple("rtc-mv", -1, dove_rtc_resource, 2);
}
/*****************************************************************************
* SATA
****************************************************************************/
static struct resource dove_sata_resources[] = {
{
.name = "sata base",
.start = DOVE_SATA_PHYS_BASE,
.end = DOVE_SATA_PHYS_BASE + 0x5000 - 1,
.flags = IORESOURCE_MEM,
}, {
.name = "sata irq",
.start = IRQ_DOVE_SATA,
.end = IRQ_DOVE_SATA,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dove_sata = {
.name = "sata_mv",
.id = 0,
.dev = {
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = ARRAY_SIZE(dove_sata_resources),
.resource = dove_sata_resources,
};
void __init dove_sata_init(struct mv_sata_platform_data *sata_data)
{
sata_data->dram = &dove_mbus_dram_info;
dove_sata.dev.platform_data = sata_data;
platform_device_register(&dove_sata);
}
/*****************************************************************************
* UART0
****************************************************************************/
static struct plat_serial8250_port dove_uart0_data[] = {
{
.mapbase = DOVE_UART0_PHYS_BASE,
.membase = (char *)DOVE_UART0_VIRT_BASE,
.irq = IRQ_DOVE_UART_0,
.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 0,
}, {
},
};
static struct resource dove_uart0_resources[] = {
{
.start = DOVE_UART0_PHYS_BASE,
.end = DOVE_UART0_PHYS_BASE + SZ_256 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_DOVE_UART_0,
.end = IRQ_DOVE_UART_0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dove_uart0 = {
.name = "serial8250",
.id = 0,
.dev = {
.platform_data = dove_uart0_data,
},
.resource = dove_uart0_resources,
.num_resources = ARRAY_SIZE(dove_uart0_resources),
};
void __init dove_uart0_init(void)
{
platform_device_register(&dove_uart0);
}
/*****************************************************************************
* UART1
****************************************************************************/
static struct plat_serial8250_port dove_uart1_data[] = {
{
.mapbase = DOVE_UART1_PHYS_BASE,
.membase = (char *)DOVE_UART1_VIRT_BASE,
.irq = IRQ_DOVE_UART_1,
.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 0,
}, {
},
};
static struct resource dove_uart1_resources[] = {
{
.start = DOVE_UART1_PHYS_BASE,
.end = DOVE_UART1_PHYS_BASE + SZ_256 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_DOVE_UART_1,
.end = IRQ_DOVE_UART_1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dove_uart1 = {
.name = "serial8250",
.id = 1,
.dev = {
.platform_data = dove_uart1_data,
},
.resource = dove_uart1_resources,
.num_resources = ARRAY_SIZE(dove_uart1_resources),
};
void __init dove_uart1_init(void)
{
platform_device_register(&dove_uart1);
}
/*****************************************************************************
* UART2
****************************************************************************/
static struct plat_serial8250_port dove_uart2_data[] = {
{
.mapbase = DOVE_UART2_PHYS_BASE,
.membase = (char *)DOVE_UART2_VIRT_BASE,
.irq = IRQ_DOVE_UART_2,
.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 0,
}, {
},
};
static struct resource dove_uart2_resources[] = {
{
.start = DOVE_UART2_PHYS_BASE,
.end = DOVE_UART2_PHYS_BASE + SZ_256 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_DOVE_UART_2,
.end = IRQ_DOVE_UART_2,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dove_uart2 = {
.name = "serial8250",
.id = 2,
.dev = {
.platform_data = dove_uart2_data,
},
.resource = dove_uart2_resources,
.num_resources = ARRAY_SIZE(dove_uart2_resources),
};
void __init dove_uart2_init(void)
{
platform_device_register(&dove_uart2);
}
/*****************************************************************************
* UART3
****************************************************************************/
static struct plat_serial8250_port dove_uart3_data[] = {
{
.mapbase = DOVE_UART3_PHYS_BASE,
.membase = (char *)DOVE_UART3_VIRT_BASE,
.irq = IRQ_DOVE_UART_3,
.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 0,
}, {
},
};
static struct resource dove_uart3_resources[] = {
{
.start = DOVE_UART3_PHYS_BASE,
.end = DOVE_UART3_PHYS_BASE + SZ_256 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_DOVE_UART_3,
.end = IRQ_DOVE_UART_3,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dove_uart3 = {
.name = "serial8250",
.id = 3,
.dev = {
.platform_data = dove_uart3_data,
},
.resource = dove_uart3_resources,
.num_resources = ARRAY_SIZE(dove_uart3_resources),
};
void __init dove_uart3_init(void)
{
platform_device_register(&dove_uart3);
}
/*****************************************************************************
* SPI0
****************************************************************************/
static struct orion_spi_info dove_spi0_data = {
.tclk = 0,
};
static struct resource dove_spi0_resources[] = {
{
.start = DOVE_SPI0_PHYS_BASE,
.end = DOVE_SPI0_PHYS_BASE + SZ_512 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_DOVE_SPI0,
.end = IRQ_DOVE_SPI0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dove_spi0 = {
.name = "orion_spi",
.id = 0,
.resource = dove_spi0_resources,
.dev = {
.platform_data = &dove_spi0_data,
},
.num_resources = ARRAY_SIZE(dove_spi0_resources),
};
void __init dove_spi0_init(void)
{
platform_device_register(&dove_spi0);
}
/*****************************************************************************
* SPI1
****************************************************************************/
static struct orion_spi_info dove_spi1_data = {
.tclk = 0,
};
static struct resource dove_spi1_resources[] = {
{
.start = DOVE_SPI1_PHYS_BASE,
.end = DOVE_SPI1_PHYS_BASE + SZ_512 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_DOVE_SPI1,
.end = IRQ_DOVE_SPI1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dove_spi1 = {
.name = "orion_spi",
.id = 1,
.resource = dove_spi1_resources,
.dev = {
.platform_data = &dove_spi1_data,
},
.num_resources = ARRAY_SIZE(dove_spi1_resources),
};
void __init dove_spi1_init(void)
{
platform_device_register(&dove_spi1);
}
/*****************************************************************************
* I2C
****************************************************************************/
static struct mv64xxx_i2c_pdata dove_i2c_data = {
.freq_m = 10, /* assumes 166 MHz TCLK gets 94.3kHz */
.freq_n = 3,
.timeout = 1000, /* Default timeout of 1 second */
};
static struct resource dove_i2c_resources[] = {
{
.name = "i2c base",
.start = DOVE_I2C_PHYS_BASE,
.end = DOVE_I2C_PHYS_BASE + 0x20 - 1,
.flags = IORESOURCE_MEM,
}, {
.name = "i2c irq",
.start = IRQ_DOVE_I2C,
.end = IRQ_DOVE_I2C,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dove_i2c = {
.name = MV64XXX_I2C_CTLR_NAME,
.id = 0,
.num_resources = ARRAY_SIZE(dove_i2c_resources),
.resource = dove_i2c_resources,
.dev = {
.platform_data = &dove_i2c_data,
},
};
void __init dove_i2c_init(void)
{
platform_device_register(&dove_i2c);
}
/*****************************************************************************
* Time handling
****************************************************************************/
static int get_tclk(void)
{
/* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */
return 166666667;
}
static void dove_timer_init(void)
{
orion_time_init(IRQ_DOVE_BRIDGE, get_tclk());
}
struct sys_timer dove_timer = {
.init = dove_timer_init,
};
/*****************************************************************************
* XOR
****************************************************************************/
static struct mv_xor_platform_shared_data dove_xor_shared_data = {
.dram = &dove_mbus_dram_info,
};
/*****************************************************************************
* XOR 0
****************************************************************************/
static u64 dove_xor0_dmamask = DMA_BIT_MASK(32);
static struct resource dove_xor0_shared_resources[] = {
{
.name = "xor 0 low",
.start = DOVE_XOR0_PHYS_BASE,
.end = DOVE_XOR0_PHYS_BASE + 0xff,
.flags = IORESOURCE_MEM,
}, {
.name = "xor 0 high",
.start = DOVE_XOR0_HIGH_PHYS_BASE,
.end = DOVE_XOR0_HIGH_PHYS_BASE + 0xff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device dove_xor0_shared = {
.name = MV_XOR_SHARED_NAME,
.id = 0,
.dev = {
.platform_data = &dove_xor_shared_data,
},
.num_resources = ARRAY_SIZE(dove_xor0_shared_resources),
.resource = dove_xor0_shared_resources,
};
static struct resource dove_xor00_resources[] = {
[0] = {
.start = IRQ_DOVE_XOR_00,
.end = IRQ_DOVE_XOR_00,
.flags = IORESOURCE_IRQ,
},
};
static struct mv_xor_platform_data dove_xor00_data = {
.shared = &dove_xor0_shared,
.hw_id = 0,
.pool_size = PAGE_SIZE,
};
static struct platform_device dove_xor00_channel = {
.name = MV_XOR_NAME,
.id = 0,
.num_resources = ARRAY_SIZE(dove_xor00_resources),
.resource = dove_xor00_resources,
.dev = {
.dma_mask = &dove_xor0_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
.platform_data = (void *)&dove_xor00_data,
},
};
static struct resource dove_xor01_resources[] = {
[0] = {
.start = IRQ_DOVE_XOR_01,
.end = IRQ_DOVE_XOR_01,
.flags = IORESOURCE_IRQ,
},
};
static struct mv_xor_platform_data dove_xor01_data = {
.shared = &dove_xor0_shared,
.hw_id = 1,
.pool_size = PAGE_SIZE,
};
static struct platform_device dove_xor01_channel = {
.name = MV_XOR_NAME,
.id = 1,
.num_resources = ARRAY_SIZE(dove_xor01_resources),
.resource = dove_xor01_resources,
.dev = {
.dma_mask = &dove_xor0_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
.platform_data = (void *)&dove_xor01_data,
},
};
void __init dove_xor0_init(void)
{
platform_device_register(&dove_xor0_shared);
/*
* two engines can't do memset simultaneously, this limitation
* satisfied by removing memset support from one of the engines.
*/
dma_cap_set(DMA_MEMCPY, dove_xor00_data.cap_mask);
dma_cap_set(DMA_XOR, dove_xor00_data.cap_mask);
platform_device_register(&dove_xor00_channel);
dma_cap_set(DMA_MEMCPY, dove_xor01_data.cap_mask);
dma_cap_set(DMA_MEMSET, dove_xor01_data.cap_mask);
dma_cap_set(DMA_XOR, dove_xor01_data.cap_mask);
platform_device_register(&dove_xor01_channel);
}
/*****************************************************************************
* XOR 1
****************************************************************************/
static u64 dove_xor1_dmamask = DMA_BIT_MASK(32);
static struct resource dove_xor1_shared_resources[] = {
{
.name = "xor 0 low",
.start = DOVE_XOR1_PHYS_BASE,
.end = DOVE_XOR1_PHYS_BASE + 0xff,
.flags = IORESOURCE_MEM,
}, {
.name = "xor 0 high",
.start = DOVE_XOR1_HIGH_PHYS_BASE,
.end = DOVE_XOR1_HIGH_PHYS_BASE + 0xff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device dove_xor1_shared = {
.name = MV_XOR_SHARED_NAME,
.id = 1,
.dev = {
.platform_data = &dove_xor_shared_data,
},
.num_resources = ARRAY_SIZE(dove_xor1_shared_resources),
.resource = dove_xor1_shared_resources,
};
static struct resource dove_xor10_resources[] = {
[0] = {
.start = IRQ_DOVE_XOR_10,
.end = IRQ_DOVE_XOR_10,
.flags = IORESOURCE_IRQ,
},
};
static struct mv_xor_platform_data dove_xor10_data = {
.shared = &dove_xor1_shared,
.hw_id = 0,
.pool_size = PAGE_SIZE,
};
static struct platform_device dove_xor10_channel = {
.name = MV_XOR_NAME,
.id = 2,
.num_resources = ARRAY_SIZE(dove_xor10_resources),
.resource = dove_xor10_resources,
.dev = {
.dma_mask = &dove_xor1_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
.platform_data = (void *)&dove_xor10_data,
},
};
static struct resource dove_xor11_resources[] = {
[0] = {
.start = IRQ_DOVE_XOR_11,
.end = IRQ_DOVE_XOR_11,
.flags = IORESOURCE_IRQ,
},
};
static struct mv_xor_platform_data dove_xor11_data = {
.shared = &dove_xor1_shared,
.hw_id = 1,
.pool_size = PAGE_SIZE,
};
static struct platform_device dove_xor11_channel = {
.name = MV_XOR_NAME,
.id = 3,
.num_resources = ARRAY_SIZE(dove_xor11_resources),
.resource = dove_xor11_resources,
.dev = {
.dma_mask = &dove_xor1_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
.platform_data = (void *)&dove_xor11_data,
},
};
void __init dove_xor1_init(void)
{
platform_device_register(&dove_xor1_shared);
/*
* two engines can't do memset simultaneously, this limitation
* satisfied by removing memset support from one of the engines.
*/
dma_cap_set(DMA_MEMCPY, dove_xor10_data.cap_mask);
dma_cap_set(DMA_XOR, dove_xor10_data.cap_mask);
platform_device_register(&dove_xor10_channel);
dma_cap_set(DMA_MEMCPY, dove_xor11_data.cap_mask);
dma_cap_set(DMA_MEMSET, dove_xor11_data.cap_mask);
dma_cap_set(DMA_XOR, dove_xor11_data.cap_mask);
platform_device_register(&dove_xor11_channel);
}
void __init dove_init(void)
{
int tclk;
tclk = get_tclk();
printk(KERN_INFO "Dove 88AP510 SoC, ");
printk(KERN_INFO "TCLK = %dMHz\n", (tclk + 499999) / 1000000);
dove_setup_cpu_mbus();
dove_ge00_shared_data.t_clk = tclk;
dove_uart0_data[0].uartclk = tclk;
dove_uart1_data[0].uartclk = tclk;
dove_uart2_data[0].uartclk = tclk;
dove_uart3_data[0].uartclk = tclk;
dove_spi0_data.tclk = tclk;
dove_spi1_data.tclk = tclk;
/* internal devices that every board has */
dove_rtc_init();
dove_xor0_init();
dove_xor1_init();
}
arch/arm/mach-dove/common.h 0 → 100644
View file @ edabd38e
/*
* arch/arm/mach-dove/common.h
*
* Core functions for Marvell Dove 88AP510 System On Chip
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ARCH_DOVE_COMMON_H
#define __ARCH_DOVE_COMMON_H
struct mv643xx_eth_platform_data;
struct mv_sata_platform_data;
extern struct sys_timer dove_timer;
extern struct mbus_dram_target_info dove_mbus_dram_info;
/*
* Basic Dove init functions used early by machine-setup.
*/
void dove_map_io(void);
void dove_init(void);
void dove_init_irq(void);
void dove_setup_cpu_mbus(void);
void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data);
void dove_sata_init(struct mv_sata_platform_data *sata_data);
void dove_pcie_init(int init_port0, int init_port1);
void dove_ehci0_init(void);
void dove_ehci1_init(void);
void dove_uart0_init(void);
void dove_uart1_init(void);
void dove_uart2_init(void);
void dove_uart3_init(void);
void dove_spi0_init(void);
void dove_spi1_init(void);
void dove_i2c_init(void);
#endif
arch/arm/mach-dove/dove-db-setup.c 0 → 100644
View file @ edabd38e
/*
* arch/arm/mach-dove/dove-db-setup.c
*
* Marvell DB-MV88AP510-BP Development Board Setup
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/nand.h>
#include <linux/timer.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/i2c.h>
#include <linux/pci.h>
#include <linux/spi/spi.h>
#include <linux/spi/orion_spi.h>
#include <linux/spi/flash.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/dove.h>
#include "common.h"
static struct mv643xx_eth_platform_data dove_db_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
};
static struct mv_sata_platform_data dove_db_sata_data = {
.n_ports = 1,
};
/*****************************************************************************
* SPI Devices:
* SPI0: 4M Flash ST-M25P32-VMF6P
****************************************************************************/
static const struct flash_platform_data dove_db_spi_flash_data = {
.type = "m25p64",
};
static struct spi_board_info __initdata dove_db_spi_flash_info[] = {
{
.modalias = "m25p80",
.platform_data = &dove_db_spi_flash_data,
.irq = -1,
.max_speed_hz = 20000000,
.bus_num = 0,
.chip_select = 0,
},
};
/*****************************************************************************
* PCI
****************************************************************************/
static int __init dove_db_pci_init(void)
{
if (machine_is_dove_db())
dove_pcie_init(1, 1);
return 0;
}
subsys_initcall(dove_db_pci_init);
/*****************************************************************************
* Board Init
****************************************************************************/
static void __init dove_db_init(void)
{
/*
* Basic Dove setup. Needs to be called early.
*/
dove_init();
dove_ge00_init(&dove_db_ge00_data);
dove_ehci0_init();
dove_ehci1_init();
dove_sata_init(&dove_db_sata_data);
dove_spi0_init();
dove_spi1_init();
dove_uart0_init();
dove_uart1_init();
dove_i2c_init();
spi_register_board_info(dove_db_spi_flash_info,
ARRAY_SIZE(dove_db_spi_flash_info));
}
MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
.phys_io = DOVE_SB_REGS_PHYS_BASE,
.io_pg_offst = ((DOVE_SB_REGS_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.init_machine = dove_db_init,
.map_io = dove_map_io,
.init_irq = dove_init_irq,
.timer = &dove_timer,
MACHINE_END
arch/arm/mach-dove/include/mach/bridge-regs.h 0 → 100644
View file @ edabd38e
/*
* arch/arm/mach-dove/include/mach/bridge-regs.h
*
* Mbus-L to Mbus Bridge Registers
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_BRIDGE_REGS_H
#define __ASM_ARCH_BRIDGE_REGS_H
#include <mach/dove.h>
#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0000)
#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
#define CPU_CTRL_PCIE0_LINK 0x00000001
#define CPU_RESET 0x00000002
#define CPU_CTRL_PCIE1_LINK 0x00000008
#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
#define SOFT_RESET_OUT_EN 0x00000004
#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
#define SOFT_RESET 0x00000001
#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
#define BRIDGE_INT_TIMER0 0x0002
#define BRIDGE_INT_TIMER1 0x0004
#define BRIDGE_INT_TIMER1_CLR (~0x0004)
#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
#define IRQ_CAUSE_LOW_OFF 0x0000
#define IRQ_MASK_LOW_OFF 0x0004
#define FIQ_MASK_LOW_OFF 0x0008
#define ENDPOINT_MASK_LOW_OFF 0x000c
#define IRQ_CAUSE_HIGH_OFF 0x0010
#define IRQ_MASK_HIGH_OFF 0x0014
#define FIQ_MASK_HIGH_OFF 0x0018
#define ENDPOINT_MASK_HIGH_OFF 0x001c
#define PCIE_INTERRUPT_MASK_OFF 0x0020
#define IRQ_MASK_LOW (IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)
#define FIQ_MASK_LOW (IRQ_VIRT_BASE + FIQ_MASK_LOW_OFF)
#define ENDPOINT_MASK_LOW (IRQ_VIRT_BASE + ENDPOINT_MASK_LOW_OFF)
#define IRQ_MASK_HIGH (IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)
#define FIQ_MASK_HIGH (IRQ_VIRT_BASE + FIQ_MASK_HIGH_OFF)
#define ENDPOINT_MASK_HIGH (IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF)
#define PCIE_INTERRUPT_MASK (IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF)
#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c)
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
#endif
arch/arm/mach-dove/include/mach/debug-macro.S 0 → 100644
View file @ edabd38e
/*
* arch/arm/mach-dove/include/mach/debug-macro.S
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <mach/bridge-regs.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =DOVE_SB_REGS_PHYS_BASE
ldrne \rx, =DOVE_SB_REGS_VIRT_BASE
orr \rx, \rx, #0x00012000
.endm
#define UART_SHIFT 2
#include <asm/hardware/debug-8250.S>
arch/arm/mach-dove/include/mach/dove.h 0 → 100644
View file @ edabd38e
/*
* arch/arm/mach-dove/include/mach/dove.h
*
* Generic definitions for Marvell Dove 88AP510 SoC
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_DOVE_H
#define __ASM_ARCH_DOVE_H
#include <mach/vmalloc.h>
/*
* Marvell Dove address maps.
*
* phys virt size
* c8000000 fdb00000 1M Cryptographic SRAM
* e0000000 @runtime 128M PCIe-0 Memory space
* e8000000 @runtime 128M PCIe-1 Memory space
* f1000000 fde00000 8M on-chip south-bridge registers
* f1800000 fe600000 8M on-chip north-bridge registers
* f2000000 fee00000 1M PCIe-0 I/O space
* f2100000 fef00000 1M PCIe-1 I/O space
*/
#define DOVE_CESA_PHYS_BASE 0xc8000000
#define DOVE_CESA_VIRT_BASE 0xfdb00000
#define DOVE_CESA_SIZE SZ_1M
#define DOVE_PCIE0_MEM_PHYS_BASE 0xe0000000
#define DOVE_PCIE0_MEM_SIZE SZ_128M
#define DOVE_PCIE1_MEM_PHYS_BASE 0xe8000000
#define DOVE_PCIE1_MEM_SIZE SZ_128M
#define DOVE_BOOTROM_PHYS_BASE 0xf8000000
#define DOVE_BOOTROM_SIZE SZ_128M
#define DOVE_SCRATCHPAD_PHYS_BASE 0xf0000000
#define DOVE_SCRATCHPAD_VIRT_BASE 0xfdd00000
#define DOVE_SCRATCHPAD_SIZE SZ_1M
#define DOVE_SB_REGS_PHYS_BASE 0xf1000000
#define DOVE_SB_REGS_VIRT_BASE 0xfde00000
#define DOVE_SB_REGS_SIZE SZ_8M
#define DOVE_NB_REGS_PHYS_BASE 0xf1800000
#define DOVE_NB_REGS_VIRT_BASE 0xfe600000
#define DOVE_NB_REGS_SIZE SZ_8M
#define DOVE_PCIE0_IO_PHYS_BASE 0xf2000000
#define DOVE_PCIE0_IO_VIRT_BASE 0xfee00000
#define DOVE_PCIE0_IO_BUS_BASE 0x00000000
#define DOVE_PCIE0_IO_SIZE SZ_1M
#define DOVE_PCIE1_IO_PHYS_BASE 0xf2100000
#define DOVE_PCIE1_IO_VIRT_BASE 0xfef00000
#define DOVE_PCIE1_IO_BUS_BASE 0x00100000
#define DOVE_PCIE1_IO_SIZE SZ_1M
/*
* Dove Core Registers Map
*/
/* SPI, I2C, UART */
#define DOVE_I2C_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x11000)
#define DOVE_UART0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12000)
#define DOVE_UART0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12000)
#define DOVE_UART1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12100)
#define DOVE_UART1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12100)
#define DOVE_UART2_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12200)
#define DOVE_UART2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12200)
#define DOVE_UART3_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12300)
#define DOVE_UART3_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12300)
#define DOVE_SPI0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x10600)
#define DOVE_SPI1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x14600)
/* North-South Bridge */
#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000)
/* Cryptographic Engine */
#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000)
/* PCIe 0 */
#define DOVE_PCIE0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x40000)
/* USB */
#define DOVE_USB0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x50000)
#define DOVE_USB1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x51000)
/* XOR 0 Engine */
#define DOVE_XOR0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60800)
#define DOVE_XOR0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60800)
#define DOVE_XOR0_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60A00)
#define DOVE_XOR0_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60A00)
/* XOR 1 Engine */
#define DOVE_XOR1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60900)
#define DOVE_XOR1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60900)
#define DOVE_XOR1_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60B00)
#define DOVE_XOR1_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60B00)
/* Gigabit Ethernet */
#define DOVE_GE00_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x70000)
/* PCIe 1 */
#define DOVE_PCIE1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x80000)
/* CAFE */
#define DOVE_SDIO0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x92000)
#define DOVE_SDIO1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x90000)
#define DOVE_CAM_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x94000)
#define DOVE_CAFE_WIN_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x98000)
/* SATA */
#define DOVE_SATA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xa0000)
/* I2S/SPDIF */
#define DOVE_AUD0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb0000)
#define DOVE_AUD1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb4000)
/* NAND Flash Controller */
#define DOVE_NFC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xc0000)
/* MPP, GPIO, Reset Sampling */
#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0200)
#define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10)
#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE | 0x014)
#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE | 0x018)
#define DOVE_GPIO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400)
#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c)
#define DOVE_AU1_SPDIFO_GPIO_EN (1 << 1)
#define DOVE_NAND_GPIO_EN (1 << 0)
#define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_VIRT_BASE + 0x40)
/* Power Management */
#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0000)
/* Real Time Clock */
#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xd8500)
/* AC97 */
#define DOVE_AC97_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe0000)
#define DOVE_AC97_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe0000)
/* Peripheral DMA */
#define DOVE_PDMA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe4000)
#define DOVE_PDMA_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe4000)
#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE | 0xe802C)
#define DOVE_TWSI_ENABLE_OPTION1 (1 << 7)
#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE | 0xe8030)
#define DOVE_TWSI_ENABLE_OPTION2 (1 << 20)
#define DOVE_TWSI_ENABLE_OPTION3 (1 << 21)
#define DOVE_TWSI_OPTION3_GPIO (1 << 22)
#define DOVE_SSP_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xec000)
#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE | 0xe8034)
#define DOVE_SSP_ON_AU1 (1 << 0)
#define DOVE_SSP_CLOCK_ENABLE (1 << 1)
#define DOVE_SSP_BPB_CLOCK_SRC_SSP (1 << 11)
/* Memory Controller */
#define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE | 0x00000)
/* LCD Controller */
#define DOVE_LCD_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000)
#define DOVE_LCD1_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x20000)
#define DOVE_LCD2_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000)
#define DOVE_LCD_DCON_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x30000)
/* Graphic Engine */
#define DOVE_GPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x40000)
/* Video Engine */
#define DOVE_VPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x400000)
#endif
arch/arm/mach-dove/include/mach/entry-macro.S 0 → 100644
View file @ edabd38e
/*
* arch/arm/mach-dove/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for Marvell Dove platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =IRQ_VIRT_BASE
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
@ check low interrupts
ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
mov \irqnr, #31
ands \irqstat, \irqstat, \tmp
@ if no low interrupts set, check high interrupts
ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF]
moveq \irqnr, #63
andeqs \irqstat, \irqstat, \tmp
@ find first active interrupt source
clzne \irqstat, \irqstat
subne \irqnr, \irqnr, \irqstat
.endm
arch/arm/mach-dove/include/mach/gpio.h 0 → 100644
View file @ edabd38e
/*
* arch/arm/mach-dove/include/mach/gpio.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H
#include <asm/errno.h>
#include <mach/irqs.h>
#include <plat/gpio.h>
#include <asm-generic/gpio.h> /* cansleep wrappers */
#define GPIO_MAX 64
#define GPIO_BASE_LO (DOVE_GPIO_VIRT_BASE + 0x00)
#define GPIO_BASE_HI (DOVE_GPIO_VIRT_BASE + 0x20)
#define GPIO_BASE(pin) ((pin < 32) ? GPIO_BASE_LO : GPIO_BASE_HI)
#define GPIO_OUT(pin) (GPIO_BASE(pin) + 0x00)
#define GPIO_IO_CONF(pin) (GPIO_BASE(pin) + 0x04)
#define GPIO_BLINK_EN(pin) (GPIO_BASE(pin) + 0x08)
#define GPIO_IN_POL(pin) (GPIO_BASE(pin) + 0x0c)
#define GPIO_DATA_IN(pin) (GPIO_BASE(pin) + 0x10)
#define GPIO_EDGE_CAUSE(pin) (GPIO_BASE(pin) + 0x14)
#define GPIO_EDGE_MASK(pin) (GPIO_BASE(pin) + 0x18)
#define GPIO_LEVEL_MASK(pin) (GPIO_BASE(pin) + 0x1c)
static inline int gpio_to_irq(int pin)
{
if (pin < NR_GPIO_IRQS)
return pin + IRQ_DOVE_GPIO_START;
return -EINVAL;
}
static inline int irq_to_gpio(int irq)
{
if (IRQ_DOVE_GPIO_START < irq && irq < NR_IRQS)
return irq - IRQ_DOVE_GPIO_START;
return -EINVAL;
}
#endif
arch/arm/mach-dove/include/mach/hardware.h 0 → 100644
View file @ edabd38e
/*
* arch/arm/mach-dove/include/mach/hardware.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#include "dove.h"
#define pcibios_assign_all_busses() 1
#define PCIBIOS_MIN_IO 0x1000
#define PCIBIOS_MIN_MEM 0x01000000
#define PCIMEM_BASE DOVE_PCIE0_MEM_PHYS_BASE
/* Macros below are required for compatibility with PXA AC'97 driver. */
#define __REG(x) (*((volatile u32 *)((x) - DOVE_SB_REGS_PHYS_BASE + \
DOVE_SB_REGS_VIRT_BASE)))
#define __PREG(x) (((u32)&(x)) - DOVE_SB_REGS_VIRT_BASE + \
DOVE_SB_REGS_PHYS_BASE)
#endif
arch/arm/mach-dove/include/mach/io.h 0 → 100644
View file @ edabd38e
/*
* arch/arm/mach-dove/include/mach/io.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_IO_H
#define __ASM_ARCH_IO_H
#include "dove.h"
#define IO_SPACE_LIMIT 0xffffffff
#define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_PHYS_BASE) +\
DOVE_PCIE0_IO_VIRT_BASE))
#define __mem_pci(a) (a)
#endif
arch/arm/mach-dove/include/mach/irqs.h 0 → 100644
View file @ edabd38e
/*
* arch/arm/mach-dove/include/mach/irqs.h
*
* IRQ definitions for Marvell Dove 88AP510 SoC
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
/*
* Dove Low Interrupt Controller
*/
#define IRQ_DOVE_BRIDGE 0
#define IRQ_DOVE_H2C 1
#define IRQ_DOVE_C2H 2
#define IRQ_DOVE_NAND 3
#define IRQ_DOVE_PDMA 4
#define IRQ_DOVE_SPI1 5
#define IRQ_DOVE_SPI0 6
#define IRQ_DOVE_UART_0 7
#define IRQ_DOVE_UART_1 8
#define IRQ_DOVE_UART_2 9
#define IRQ_DOVE_UART_3 10
#define IRQ_DOVE_I2C 11
#define IRQ_DOVE_GPIO_0_7 12
#define IRQ_DOVE_GPIO_8_15 13
#define IRQ_DOVE_GPIO_16_23 14
#define IRQ_DOVE_PCIE0_ERR 15
#define IRQ_DOVE_PCIE0 16
#define IRQ_DOVE_PCIE1_ERR 17
#define IRQ_DOVE_PCIE1 18
#define IRQ_DOVE_I2S0 19
#define IRQ_DOVE_I2S0_ERR 20
#define IRQ_DOVE_I2S1 21
#define IRQ_DOVE_I2S1_ERR 22
#define IRQ_DOVE_USB_ERR 23
#define IRQ_DOVE_USB0 24
#define IRQ_DOVE_USB1 25
#define IRQ_DOVE_GE00_RX 26
#define IRQ_DOVE_GE00_TX 27
#define IRQ_DOVE_GE00_MISC 28
#define IRQ_DOVE_GE00_SUM 29
#define IRQ_DOVE_GE00_ERR 30
#define IRQ_DOVE_CRYPTO 31
/*
* Dove High Interrupt Controller
*/
#define IRQ_DOVE_AC97 32
#define IRQ_DOVE_PMU 33
#define IRQ_DOVE_CAM 34
#define IRQ_DOVE_SDIO0 35
#define IRQ_DOVE_SDIO1 36
#define IRQ_DOVE_SDIO0_WAKEUP 37
#define IRQ_DOVE_SDIO1_WAKEUP 38
#define IRQ_DOVE_XOR_00 39
#define IRQ_DOVE_XOR_01 40
#define IRQ_DOVE_XOR0_ERR 41
#define IRQ_DOVE_XOR_10 42
#define IRQ_DOVE_XOR_11 43
#define IRQ_DOVE_XOR1_ERR 44
#define IRQ_DOVE_LCD_DCON 45
#define IRQ_DOVE_LCD1 46
#define IRQ_DOVE_LCD0 47
#define IRQ_DOVE_GPU 48
#define IRQ_DOVE_PERFORM_MNTR 49
#define IRQ_DOVE_VPRO_DMA1 51
#define IRQ_DOVE_SSP_TIMER 54
#define IRQ_DOVE_SSP 55
#define IRQ_DOVE_MC_L2_ERR 56
#define IRQ_DOVE_CRYPTO_ERR 59
#define IRQ_DOVE_GPIO_24_31 60
#define IRQ_DOVE_HIGH_GPIO 61
#define IRQ_DOVE_SATA 62
/*
* DOVE General Purpose Pins
*/
#define IRQ_DOVE_GPIO_START 64
#define NR_GPIO_IRQS 64
/*
* PMU interrupts
*/
#define IRQ_DOVE_PMU_START (IRQ_DOVE_GPIO_START + NR_GPIO_IRQS)
#define NR_PMU_IRQS 7
#define IRQ_DOVE_RTC (IRQ_DOVE_PMU_START + 5)
#define NR_IRQS (IRQ_DOVE_PMU_START + NR_PMU_IRQS)
/* Required for compatability with PXA AC97 driver. */
#define IRQ_AC97 IRQ_DOVE_AC97
/* Required for compatability with PXA DMA driver. */
#define IRQ_DMA IRQ_DOVE_PDMA
/* Required for compatability with PXA NAND driver */
#define IRQ_NAND IRQ_DOVE_NAND
#endif
arch/arm/mach-dove/include/mach/memory.h 0 → 100644
View file @ edabd38e
/*
* arch/arm/mach-dove/include/mach/memory.h
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PHYS_OFFSET UL(0x00000000)
#endif
arch/arm/mach-dove/include/mach/pm.h 0 → 100644
View file @ edabd38e
/*
* arch/arm/mach-dove/include/mach/pm.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_PM_H
#define __ASM_ARCH_PM_H
#include <asm/errno.h>
#include <mach/irqs.h>
#define CLOCK_GATING_CONTROL (DOVE_PMU_VIRT_BASE + 0x38)
#define CLOCK_GATING_USB0_MASK (1 << 0)
#define CLOCK_GATING_USB1_MASK (1 << 1)
#define CLOCK_GATING_GBE_MASK (1 << 2)
#define CLOCK_GATING_SATA_MASK (1 << 3)
#define CLOCK_GATING_PCIE0_MASK (1 << 4)
#define CLOCK_GATING_PCIE1_MASK (1 << 5)
#define CLOCK_GATING_SDIO0_MASK (1 << 8)
#define CLOCK_GATING_SDIO1_MASK (1 << 9)
#define CLOCK_GATING_NAND_MASK (1 << 10)
#define CLOCK_GATING_CAMERA_MASK (1 << 11)
#define CLOCK_GATING_I2S0_MASK (1 << 12)
#define CLOCK_GATING_I2S1_MASK (1 << 13)
#define CLOCK_GATING_CRYPTO_MASK (1 << 15)
#define CLOCK_GATING_AC97_MASK (1 << 21)
#define CLOCK_GATING_PDMA_MASK (1 << 22)
#define CLOCK_GATING_XOR0_MASK (1 << 23)
#define CLOCK_GATING_XOR1_MASK (1 << 24)
#define CLOCK_GATING_GIGA_PHY_MASK (1 << 30)
#define PMU_INTERRUPT_CAUSE (DOVE_PMU_VIRT_BASE + 0x50)
#define PMU_INTERRUPT_MASK (DOVE_PMU_VIRT_BASE + 0x54)
static inline int pmu_to_irq(int pin)
{
if (pin < NR_PMU_IRQS)
return pin + IRQ_DOVE_PMU_START;
return -EINVAL;
}
static inline int irq_to_pmu(int irq)
{
if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS)
return irq - IRQ_DOVE_PMU_START;
return -EINVAL;
}
#endif
arch/arm/mach-dove/include/mach/system.h 0 → 100644
View file @ edabd38e
/*
* arch/arm/mach-dove/include/mach/system.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
#include <mach/bridge-regs.h>
static inline void arch_idle(void)
{
cpu_do_idle();
}
static inline void arch_reset(char mode, const char *cmd)
{
/*
* Enable soft reset to assert RSTOUTn.
*/
writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
/*
* Assert soft reset.
*/
writel(SOFT_RESET, SYSTEM_SOFT_RESET);
while (1)
;
}
#endif
arch/arm/mach-dove/include/mach/timex.h 0 → 100644
View file @ edabd38e
/*
* arch/arm/mach-dove/include/mach/timex.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#define CLOCK_TICK_RATE (100 * HZ)
arch/arm/mach-dove/include/mach/uncompress.h 0 → 100644
View file @ edabd38e
/*
* arch/arm/mach-dove/include/mach/uncompress.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <mach/dove.h>
#define UART_THR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x0))
#define UART_LSR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x14))
#define LSR_THRE 0x20
static void putc(const char c)
{
int i;
for (i = 0; i < 0x1000; i++) {
/* Transmit fifo not full? */
if (*UART_LSR & LSR_THRE)
break;
}
*UART_THR = c;
}
static void flush(void)
{
}
/*
* nothing to do
*/
#define arch_decomp_setup()
#define arch_decomp_wdog()
arch/arm/mach-dove/include/mach/vmalloc.h 0 → 100644
View file @ edabd38e
/*
* arch/arm/mach-dove/include/mach/vmalloc.h
*/
#define VMALLOC_END 0xfd800000
arch/arm/mach-dove/irq.c 0 → 100644
View file @ edabd38e
/*
* arch/arm/mach-dove/irq.c
*
* Dove IRQ handling.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <plat/irq.h>
#include <asm/mach/irq.h>
#include <mach/pm.h>
#include <mach/bridge-regs.h>
#include "common.h"
static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
{
int irqoff;
BUG_ON(irq < IRQ_DOVE_GPIO_0_7 || irq > IRQ_DOVE_HIGH_GPIO);
irqoff = irq <= IRQ_DOVE_GPIO_16_23 ? irq - IRQ_DOVE_GPIO_0_7 :
3 + irq - IRQ_DOVE_GPIO_24_31;
orion_gpio_irq_handler(irqoff << 3);
if (irq == IRQ_DOVE_HIGH_GPIO) {
orion_gpio_irq_handler(40);
orion_gpio_irq_handler(48);
orion_gpio_irq_handler(56);
}
}
static void pmu_irq_mask(unsigned int irq)
{
int pin = irq_to_pmu(irq);
u32 u;
u = readl(PMU_INTERRUPT_MASK);
u &= ~(1 << (pin & 31));
writel(u, PMU_INTERRUPT_MASK);
}
static void pmu_irq_unmask(unsigned int irq)
{
int pin = irq_to_pmu(irq);
u32 u;
u = readl(PMU_INTERRUPT_MASK);
u |= 1 << (pin & 31);
writel(u, PMU_INTERRUPT_MASK);
}
static void pmu_irq_ack(unsigned int irq)
{
int pin = irq_to_pmu(irq);
u32 u;
u = ~(1 << (pin & 31));
writel(u, PMU_INTERRUPT_CAUSE);
}
static struct irq_chip pmu_irq_chip = {
.name = "pmu_irq",
.mask = pmu_irq_mask,
.unmask = pmu_irq_unmask,
.ack = pmu_irq_ack,
};
static void pmu_irq_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned long cause = readl(PMU_INTERRUPT_CAUSE);
cause &= readl(PMU_INTERRUPT_MASK);
if (cause == 0) {
do_bad_IRQ(irq, desc);
return;
}
for (irq = 0; irq < NR_PMU_IRQS; irq++) {
if (!(cause & (1 << irq)))
continue;
irq = pmu_to_irq(irq);
desc = irq_desc + irq;
desc_handle_irq(irq, desc);
}
}
void __init dove_init_irq(void)
{
int i;
orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
/*
* Mask and clear GPIO IRQ interrupts.
*/
writel(0, GPIO_LEVEL_MASK(0));
writel(0, GPIO_EDGE_MASK(0));
writel(0, GPIO_EDGE_CAUSE(0));
/*
* Mask and clear PMU interrupts
*/
writel(0, PMU_INTERRUPT_MASK);
writel(0, PMU_INTERRUPT_CAUSE);
for (i = IRQ_DOVE_GPIO_START; i < IRQ_DOVE_PMU_START; i++) {
set_irq_chip(i, &orion_gpio_irq_chip);
set_irq_handler(i, handle_level_irq);
irq_desc[i].status |= IRQ_LEVEL;
set_irq_flags(i, IRQF_VALID);
}
set_irq_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler);
set_irq_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler);
set_irq_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler);
set_irq_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler);
set_irq_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler);
for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) {
set_irq_chip(i, &pmu_irq_chip);
set_irq_handler(i, handle_level_irq);
irq_desc[i].status |= IRQ_LEVEL;
set_irq_flags(i, IRQF_VALID);
}
set_irq_chained_handler(IRQ_DOVE_PMU, pmu_irq_handler);
}
arch/arm/mach-dove/pcie.c 0 → 100644
View file @ edabd38e
/*
* arch/arm/mach-dove/pcie.c
*
* PCIe functions for Marvell Dove 88AP510 SoC
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/mbus.h>
#include <asm/mach/pci.h>
#include <asm/mach/arch.h>
#include <asm/setup.h>
#include <asm/delay.h>
#include <plat/pcie.h>
#include <mach/irqs.h>
#include <mach/bridge-regs.h>
#include "common.h"
struct pcie_port {
u8 index;
u8 root_bus_nr;
void __iomem *base;
spinlock_t conf_lock;
char io_space_name[16];
char mem_space_name[16];
struct resource res[2];
};
static struct pcie_port pcie_port[2];
static int num_pcie_ports;
static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
{
struct pcie_port *pp;
if (nr >= num_pcie_ports)
return 0;
pp = &pcie_port[nr];
pp->root_bus_nr = sys->busnr;
/*
* Generic PCIe unit setup.
*/
orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
orion_pcie_setup(pp->base, &dove_mbus_dram_info);
/*
* IORESOURCE_IO
*/
snprintf(pp->io_space_name, sizeof(pp->io_space_name),
"PCIe %d I/O", pp->index);
pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
pp->res[0].name = pp->io_space_name;
if (pp->index == 0) {
pp->res[0].start = DOVE_PCIE0_IO_PHYS_BASE;
pp->res[0].end = pp->res[0].start + DOVE_PCIE0_IO_SIZE - 1;
} else {
pp->res[0].start = DOVE_PCIE1_IO_PHYS_BASE;
pp->res[0].end = pp->res[0].start + DOVE_PCIE1_IO_SIZE - 1;
}
pp->res[0].flags = IORESOURCE_IO;
if (request_resource(&ioport_resource, &pp->res[0]))
panic("Request PCIe IO resource failed\n");
sys->resource[0] = &pp->res[0];
/*
* IORESOURCE_MEM
*/
snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
"PCIe %d MEM", pp->index);
pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
pp->res[1].name = pp->mem_space_name;
if (pp->index == 0) {
pp->res[1].start = DOVE_PCIE0_MEM_PHYS_BASE;
pp->res[1].end = pp->res[1].start + DOVE_PCIE0_MEM_SIZE - 1;
} else {
pp->res[1].start = DOVE_PCIE1_MEM_PHYS_BASE;
pp->res[1].end = pp->res[1].start + DOVE_PCIE1_MEM_SIZE - 1;
}
pp->res[1].flags = IORESOURCE_MEM;
if (request_resource(&iomem_resource, &pp->res[1]))
panic("Request PCIe Memory resource failed\n");
sys->resource[1] = &pp->res[1];
sys->resource[2] = NULL;
return 1;
}
static struct pcie_port *bus_to_port(int bus)
{
int i;
for (i = num_pcie_ports - 1; i >= 0; i--) {
int rbus = pcie_port[i].root_bus_nr;
if (rbus != -1 && rbus <= bus)
break;
}
return i >= 0 ? pcie_port + i : NULL;
}
static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
{
/*
* Don't go out when trying to access nonexisting devices
* on the local bus.
*/
if (bus == pp->root_bus_nr && dev > 1)
return 0;
return 1;
}
static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
int size, u32 *val)
{
struct pcie_port *pp = bus_to_port(bus->number);
unsigned long flags;
int ret;
if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
*val = 0xffffffff;
return PCIBIOS_DEVICE_NOT_FOUND;
}
spin_lock_irqsave(&pp->conf_lock, flags);
ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
spin_unlock_irqrestore(&pp->conf_lock, flags);
return ret;
}
static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
int where, int size, u32 val)
{
struct pcie_port *pp = bus_to_port(bus->number);
unsigned long flags;
int ret;
if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
return PCIBIOS_DEVICE_NOT_FOUND;
spin_lock_irqsave(&pp->conf_lock, flags);
ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
spin_unlock_irqrestore(&pp->conf_lock, flags);
return ret;
}
static struct pci_ops pcie_ops = {
.read = pcie_rd_conf,
.write = pcie_wr_conf,
};
static void __devinit rc_pci_fixup(struct pci_dev *dev)
{
/*
* Prevent enumeration of root complex.
*/
if (dev->bus->parent == NULL && dev->devfn == 0) {
int i;
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
dev->resource[i].start = 0;
dev->resource[i].end = 0;
dev->resource[i].flags = 0;
}
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
static struct pci_bus __init *
dove_pcie_scan_bus(int nr, struct pci_sys_data *sys)
{
struct pci_bus *bus;
if (nr < num_pcie_ports) {
bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
} else {
bus = NULL;
BUG();
}
return bus;
}
static int __init dove_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
struct pcie_port *pp = bus_to_port(dev->bus->number);
return pp->index ? IRQ_DOVE_PCIE1 : IRQ_DOVE_PCIE0;
}
static struct hw_pci dove_pci __initdata = {
.nr_controllers = 2,
.swizzle = pci_std_swizzle,
.setup = dove_pcie_setup,
.scan = dove_pcie_scan_bus,
.map_irq = dove_pcie_map_irq,
};
static void __init add_pcie_port(int index, unsigned long base)
{
printk(KERN_INFO "Dove PCIe port %d: ", index);
if (orion_pcie_link_up((void __iomem *)base)) {
struct pcie_port *pp = &pcie_port[num_pcie_ports++];
printk(KERN_INFO "link up\n");
pp->index = index;
pp->root_bus_nr = -1;
pp->base = (void __iomem *)base;
spin_lock_init(&pp->conf_lock);
memset(pp->res, 0, sizeof(pp->res));
} else {
printk(KERN_INFO "link down, ignoring\n");
}
}
void __init dove_pcie_init(int init_port0, int init_port1)
{
if (init_port0)
add_pcie_port(0, DOVE_PCIE0_VIRT_BASE);
if (init_port1)
add_pcie_port(1, DOVE_PCIE1_VIRT_BASE);
pci_common_init(&dove_pci);
}
arch/arm/mm/Kconfig
View file @ edabd38e
...@@ -388,7 +388,7 @@ config CPU_FEROCEON_OLD_ID ...@@ -388,7 +388,7 @@ config CPU_FEROCEON_OLD_ID
# ARMv6 # ARMv6
config CPU_V6 config CPU_V6
bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_DOVE
select CPU_32v6 select CPU_32v6
select CPU_ABRT_EV6 select CPU_ABRT_EV6
select CPU_PABRT_V6 select CPU_PABRT_V6
......
arch/arm/mm/proc-v6.S
View file @ edabd38e
...@@ -130,9 +130,16 @@ ENTRY(cpu_v6_set_pte_ext) ...@@ -130,9 +130,16 @@ ENTRY(cpu_v6_set_pte_ext)
.type cpu_v6_name, #object
cpu_v6_name: cpu_v6_name:
.asciz "ARMv6-compatible processor" .asciz "ARMv6-compatible processor"
.size cpu_v6_name, . - cpu_v6_name
.type cpu_pj4_name, #object
cpu_pj4_name:
.asciz "Marvell PJ4 processor"
.size cpu_pj4_name, . - cpu_pj4_name
.align .align
__INIT __INIT
...@@ -241,3 +248,27 @@ __v6_proc_info: ...@@ -241,3 +248,27 @@ __v6_proc_info:
.long v6_user_fns .long v6_user_fns
.long v6_cache_fns .long v6_cache_fns
.size __v6_proc_info, . - __v6_proc_info .size __v6_proc_info, . - __v6_proc_info
.type __pj4_v6_proc_info, #object
__pj4_v6_proc_info:
.long 0x560f5810
.long 0xff0ffff0
.long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
.long PMD_TYPE_SECT | \
PMD_SECT_XN | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
b __v6_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
.long cpu_pj4_name
.long v6_processor_functions
.long v6wbi_tlb_fns
.long v6_user_fns
.long v6_cache_fns
.size __pj4_v6_proc_info, . - __pj4_v6_proc_info
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7