drm/rockchip: Use DRM_DEV_ERROR in vop

Since we can have multiple vops, use DRM_DEV_ERROR to
make logs easier to process.
Acked-by: Mark Yao <mark.yao@rockchip.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1471021254-2563-3-git-send-email-seanpaul@chromium.org

drivers/gpu/drm/rockchip/rockchip_drm_vop.c

@@ -238,7 +238,7 @@ static enum vop_data_format vop_convert_format(uint32_t format)
 	case DRM_FORMAT_NV24:
 		return VOP_FMT_YUV444SP;
 	default:
-		DRM_ERROR("unsupport format[%08x]\n", format);
+		DRM_ERROR("unsupported format[%08x]\n", format);
 		return -EINVAL;
 	}
 }
@@ -315,7 +315,7 @@ static void scl_vop_cal_scl_fac(struct vop *vop, const struct vop_win_data *win,
 	int vskiplines = 0;
 
 	if (dst_w > 3840) {
-		DRM_ERROR("Maximum destination width (3840) exceeded\n");
+		DRM_DEV_ERROR(vop->dev, "Maximum dst width (3840) exceeded\n");
 		return;
 	}
 
@@ -353,11 +353,11 @@ static void scl_vop_cal_scl_fac(struct vop *vop, const struct vop_win_data *win,
 	VOP_SCL_SET_EXT(vop, win, lb_mode, lb_mode);
 	if (lb_mode == LB_RGB_3840X2) {
 		if (yrgb_ver_scl_mode != SCALE_NONE) {
-			DRM_ERROR("ERROR : not allow yrgb ver scale\n");
+			DRM_DEV_ERROR(vop->dev, "not allow yrgb ver scale\n");
 			return;
 		}
 		if (cbcr_ver_scl_mode != SCALE_NONE) {
-			DRM_ERROR("ERROR : not allow cbcr ver scale\n");
+			DRM_DEV_ERROR(vop->dev, "not allow cbcr ver scale\n");
 			return;
 		}
 		vsu_mode = SCALE_UP_BIL;
@@ -970,7 +970,8 @@ static void vop_crtc_enable(struct drm_crtc *crtc)
 		VOP_CTRL_SET(vop, mipi_en, 1);
 		break;
 	default:
-		DRM_ERROR("unsupport connector_type[%d]\n", s->output_type);
+		DRM_DEV_ERROR(vop->dev, "unsupported connector_type [%d]\n",
+			      s->output_type);
 	}
 	VOP_CTRL_SET(vop, out_mode, s->output_mode);
 
@@ -1154,7 +1155,8 @@ static irqreturn_t vop_isr(int irq, void *data)
 
 	/* Unhandled irqs are spurious. */
 	if (active_irqs)
-		DRM_ERROR("Unknown VOP IRQs: %#02x\n", active_irqs);
+		DRM_DEV_ERROR(vop->dev, "Unknown VOP IRQs: %#02x\n",
+			      active_irqs);
 
 	return ret;
 }
@@ -1189,7 +1191,8 @@ static int vop_create_crtc(struct vop *vop)
 					       win_data->phy->nformats,
 					       win_data->type, NULL);
 		if (ret) {
-			DRM_ERROR("failed to initialize plane\n");
+			DRM_DEV_ERROR(vop->dev, "failed to init plane %d\n",
+				      ret);
 			goto err_cleanup_planes;
 		}
 
@@ -1227,7 +1230,8 @@ static int vop_create_crtc(struct vop *vop)
 					       win_data->phy->nformats,
 					       win_data->type, NULL);
 		if (ret) {
-			DRM_ERROR("failed to initialize overlay plane\n");
+			DRM_DEV_ERROR(vop->dev, "failed to init overlay %d\n",
+				      ret);
 			goto err_cleanup_crtc;
 		}
 		drm_plane_helper_add(&vop_win->base, &plane_helper_funcs);
@@ -1235,7 +1239,7 @@ static int vop_create_crtc(struct vop *vop)
 
 	port = of_get_child_by_name(dev->of_node, "port");
 	if (!port) {
-		DRM_ERROR("no port node found in %s\n",
+		DRM_DEV_ERROR(vop->dev, "no port node found in %s\n",
 			      dev->of_node->full_name);
 		ret = -ENOENT;
 		goto err_cleanup_crtc;