ARM: pxa: move regs-lcd.h into driver

Only the pxafb driver uses this header, so move it into the
same directory. The SMART_* macros are required by some
platform data definitions and can go into the
linux/platform_data/video-pxafb.h header.
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/mach-pxa/include/mach/regs-lcd.h → drivers/video/fbdev/pxa3xx-regs.h

@@ -177,23 +177,4 @@
 #define PRSR_ST_OK	(1 << 9)	/* Status OK */
 #define PRSR_CON_NT	(1 << 10)	/* Continue to Next Command */
 
-#define SMART_CMD_A0			 (0x1 << 8)
-#define SMART_CMD_READ_STATUS_REG	 (0x0 << 9)
-#define SMART_CMD_READ_FRAME_BUFFER	((0x0 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WRITE_COMMAND		 (0x1 << 9)
-#define SMART_CMD_WRITE_DATA		((0x1 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WRITE_FRAME		((0x2 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WAIT_FOR_VSYNC	 (0x3 << 9)
-#define SMART_CMD_NOOP			 (0x4 << 9)
-#define SMART_CMD_INTERRUPT		 (0x5 << 9)
-
-#define SMART_CMD(x)	(SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
-#define SMART_DAT(x)	(SMART_CMD_WRITE_DATA | ((x) & 0xff))
-
-/* SMART_DELAY() is introduced for software controlled delay primitive which
- * can be inserted between command sequences, unused command 0x6 is used here
- * and delay ranges from 0ms ~ 255ms
- */
-#define SMART_CMD_DELAY		(0x6 << 9)
-#define SMART_DELAY(ms)		(SMART_CMD_DELAY | ((ms) & 0xff))
 #endif /* __ASM_ARCH_REGS_LCD_H */

drivers/video/fbdev/pxafb.c

@@ -72,6 +72,7 @@
 #define DEBUG_VAR 1
 
 #include "pxafb.h"
+#include "pxa3xx-regs.h"
 
 /* Bits which should not be set in machine configuration structures */
 #define LCCR0_INVALID_CONFIG_MASK	(LCCR0_OUM | LCCR0_BM | LCCR0_QDM |\

include/linux/platform_data/video-pxafb.h

@@ -8,7 +8,6 @@
  */
 
 #include <linux/fb.h>
-#include <mach/regs-lcd.h>
 
 /*
  * Supported LCD connections
@@ -153,6 +152,27 @@ struct pxafb_mach_info {
 void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
 unsigned long pxafb_get_hsync_time(struct device *dev);
 
+/* smartpanel related */
+#define SMART_CMD_A0			 (0x1 << 8)
+#define SMART_CMD_READ_STATUS_REG	 (0x0 << 9)
+#define SMART_CMD_READ_FRAME_BUFFER	((0x0 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_COMMAND		 (0x1 << 9)
+#define SMART_CMD_WRITE_DATA		((0x1 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_FRAME		((0x2 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WAIT_FOR_VSYNC	 (0x3 << 9)
+#define SMART_CMD_NOOP			 (0x4 << 9)
+#define SMART_CMD_INTERRUPT		 (0x5 << 9)
+
+#define SMART_CMD(x)	(SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
+#define SMART_DAT(x)	(SMART_CMD_WRITE_DATA | ((x) & 0xff))
+
+/* SMART_DELAY() is introduced for software controlled delay primitive which
+ * can be inserted between command sequences, unused command 0x6 is used here
+ * and delay ranges from 0ms ~ 255ms
+ */
+#define SMART_CMD_DELAY		(0x6 << 9)
+#define SMART_DELAY(ms)		(SMART_CMD_DELAY | ((ms) & 0xff))
+
 #ifdef CONFIG_FB_PXA_SMARTPANEL
 extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
 extern int pxafb_smart_flush(struct fb_info *info);