qlcnic: Enhance virtual NIC logging

Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qlcnic/qlcnic.h

@@ -442,6 +442,7 @@ struct qlcnic_hardware_context {
 	u16 max_mtu;
 	u32 msg_enable;
 	u16 act_pci_func;
+	u16 max_pci_func;
 
 	u32 capabilities;
 	u32 capabilities2;

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c

@@ -2134,26 +2134,25 @@ int qlcnic_83xx_get_nic_info(struct qlcnic_adapter *adapter,
 int qlcnic_83xx_get_pci_info(struct qlcnic_adapter *adapter,
 			     struct qlcnic_pci_info *pci_info)
 {
+	struct qlcnic_hardware_context *ahw = adapter->ahw;
+	struct device *dev = &adapter->pdev->dev;
+	struct qlcnic_cmd_args cmd;
 	int i, err = 0, j = 0;
 	u32 temp;
-	struct qlcnic_cmd_args cmd;
 
 	qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_GET_PCI_INFO);
 	err = qlcnic_issue_cmd(adapter, &cmd);
 
-	adapter->ahw->act_pci_func = 0;
+	ahw->act_pci_func = 0;
 	if (err == QLCNIC_RCODE_SUCCESS) {
-		pci_info->func_count = cmd.rsp.arg[1] & 0xFF;
-		dev_info(&adapter->pdev->dev,
-			 "%s: total functions = %d\n",
-			 __func__, pci_info->func_count);
+		ahw->max_pci_func = cmd.rsp.arg[1] & 0xFF;
 		for (i = 2, j = 0; j < QLCNIC_MAX_PCI_FUNC; j++, pci_info++) {
 			pci_info->id = cmd.rsp.arg[i] & 0xFFFF;
 			pci_info->active = (cmd.rsp.arg[i] & 0xFFFF0000) >> 16;
 			i++;
 			pci_info->type = cmd.rsp.arg[i] & 0xFFFF;
 			if (pci_info->type == QLCNIC_TYPE_NIC)
-				adapter->ahw->act_pci_func++;
+				ahw->act_pci_func++;
 			temp = (cmd.rsp.arg[i] & 0xFFFF0000) >> 16;
 			pci_info->default_port = temp;
 			i++;
@@ -2165,18 +2164,21 @@ int qlcnic_83xx_get_pci_info(struct qlcnic_adapter *adapter,
 			i++;
 			memcpy(pci_info->mac + sizeof(u32), &cmd.rsp.arg[i], 2);
 			i = i + 3;
-
-			dev_info(&adapter->pdev->dev, "%s:\n"
-				 "\tid = %d active = %d type = %d\n"
+			if (ahw->op_mode == QLCNIC_MGMT_FUNC)
+				dev_info(dev, "id = %d active = %d type = %d\n"
 					 "\tport = %d min bw = %d max bw = %d\n"
-				 "\tmac_addr =  %pM\n", __func__,
-				 pci_info->id, pci_info->active, pci_info->type,
-				 pci_info->default_port, pci_info->tx_min_bw,
+					 "\tmac_addr =  %pM\n", pci_info->id,
+					 pci_info->active, pci_info->type,
+					 pci_info->default_port,
+					 pci_info->tx_min_bw,
 					 pci_info->tx_max_bw, pci_info->mac);
 		}
+		if (ahw->op_mode == QLCNIC_MGMT_FUNC)
+			dev_info(dev, "Max vNIC functions = %d, active vNIC functions = %d\n",
+				 ahw->max_pci_func, ahw->act_pci_func);
+
 	} else {
-		dev_err(&adapter->pdev->dev, "Failed to get PCI Info%d\n",
-			err);
+		dev_err(dev, "Failed to get PCI Info, error = %d\n", err);
 		err = -EIO;
 	}
 

drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c

@@ -885,9 +885,10 @@ int qlcnic_82xx_get_pci_info(struct qlcnic_adapter *adapter,
 int qlcnic_config_port_mirroring(struct qlcnic_adapter *adapter, u8 id,
 				 u8 enable_mirroring, u8 pci_func)
 {
+	struct device *dev = &adapter->pdev->dev;
+	struct qlcnic_cmd_args cmd;
 	int err = -EIO;
 	u32 arg1;
-	struct qlcnic_cmd_args cmd;
 
 	if (adapter->ahw->op_mode != QLCNIC_MGMT_FUNC ||
 	    !(adapter->eswitch[id].flags & QLCNIC_SWITCH_ENABLE))
@@ -901,13 +902,11 @@ int qlcnic_config_port_mirroring(struct qlcnic_adapter *adapter, u8 id,
 	err = qlcnic_issue_cmd(adapter, &cmd);
 
 	if (err != QLCNIC_RCODE_SUCCESS)
-		dev_err(&adapter->pdev->dev,
-			"Failed to configure port mirroring%d on eswitch:%d\n",
+		dev_err(dev, "Failed to configure port mirroring for vNIC function %d on eSwitch %d\n",
 			pci_func, id);
 	else
-		dev_info(&adapter->pdev->dev,
-			"Configured eSwitch %d for port mirroring:%d\n",
-			id, pci_func);
+		dev_info(dev, "Configured port mirroring for vNIC function %d on eSwitch %d\n",
+			 pci_func, id);
 	qlcnic_free_mbx_args(&cmd);
 
 	return err;
@@ -1122,14 +1121,13 @@ int qlcnic_clear_esw_stats(struct qlcnic_adapter *adapter, const u8 func_esw,
 	return -EIO;
 }
 
-static int
-__qlcnic_get_eswitch_port_config(struct qlcnic_adapter *adapter,
+static int __qlcnic_get_eswitch_port_config(struct qlcnic_adapter *adapter,
 					    u32 *arg1, u32 *arg2)
 {
-	int err = -EIO;
+	struct device *dev = &adapter->pdev->dev;
 	struct qlcnic_cmd_args cmd;
-	u8 pci_func;
-	pci_func = (*arg1 >> 8);
+	u8 pci_func = *arg1 >> 8;
+	int err = -EIO;
 
 	qlcnic_alloc_mbx_args(&cmd, adapter,
 			      QLCNIC_CMD_GET_ESWITCH_PORT_CONFIG);
@@ -1140,11 +1138,10 @@ __qlcnic_get_eswitch_port_config(struct qlcnic_adapter *adapter,
 	qlcnic_free_mbx_args(&cmd);
 
 	if (err == QLCNIC_RCODE_SUCCESS)
-		dev_info(&adapter->pdev->dev,
-			 "eSwitch port config for pci func %d\n", pci_func);
+		dev_info(dev, "Get eSwitch port config for vNIC function %d\n",
+			 pci_func);
 	else
-		dev_err(&adapter->pdev->dev,
-			"Failed to get eswitch port config for pci func %d\n",
+		dev_err(dev, "Failed to get eswitch port config for vNIC function %d\n",
 			pci_func);
 	return err;
 }
@@ -1158,9 +1155,10 @@ op_type = 1 for port vlan_id
 int qlcnic_config_switch_port(struct qlcnic_adapter *adapter,
 		struct qlcnic_esw_func_cfg *esw_cfg)
 {
+	struct device *dev = &adapter->pdev->dev;
+	struct qlcnic_cmd_args cmd;
 	int err = -EIO, index;
 	u32 arg1, arg2 = 0;
-	struct qlcnic_cmd_args cmd;
 	u8 pci_func;
 
 	if (adapter->ahw->op_mode != QLCNIC_MGMT_FUNC)
@@ -1217,11 +1215,11 @@ int qlcnic_config_switch_port(struct qlcnic_adapter *adapter,
 	qlcnic_free_mbx_args(&cmd);
 
 	if (err != QLCNIC_RCODE_SUCCESS)
-		dev_err(&adapter->pdev->dev,
-			"Failed to configure eswitch pci func %d\n", pci_func);
+		dev_err(dev, "Failed to configure eswitch for vNIC function %d\n",
+			pci_func);
 	else
-		dev_info(&adapter->pdev->dev,
-			 "Configured eSwitch for pci func %d\n", pci_func);
+		dev_info(dev, "Configured eSwitch for vNIC function %d\n",
+			 pci_func);
 
 	return err;
 }