[PATCH] pcmcia: remove manf_id and card_id indirection

As we read out the manufactor and card_id from the PCMCIA device in the
PCMCIA core, and device drivers can access those reliably in struct
pcmcia_device's fields manf_id and card_id, remove additional (and partly
broken) manf_id and card_id detection logic from PCMCIA device drivers.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

drivers/ata/pata_pcmcia.c

@@ -164,9 +164,9 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 
 	/* See if we have a manufacturer identifier. Use it to set is_kme for
 	   vendor quirks */
-	tuple.DesiredTuple = CISTPL_MANFID;
-	if (!pcmcia_get_first_tuple(pdev, &tuple) && !pcmcia_get_tuple_data(pdev, &tuple) && !pcmcia_parse_tuple(pdev, &tuple, &stk->parse))
-			is_kme = ((stk->parse.manfid.manf == MANFID_KME) && ((stk->parse.manfid.card == PRODID_KME_KXLC005_A) || (stk->parse.manfid.card == PRODID_KME_KXLC005_B)));
+	is_kme = ((pdev->manf_id == MANFID_KME) &&
+		  ((pdev->card_id == PRODID_KME_KXLC005_A) ||
+		   (pdev->card_id == PRODID_KME_KXLC005_B)));
 
 	/* Not sure if this is right... look up the current Vcc */
 	CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(pdev, &stk->conf));

drivers/ide/legacy/ide-cs.c

@@ -199,13 +199,9 @@ static int ide_config(struct pcmcia_device *link)
     link->conf.ConfigBase = stk->parse.config.base;
     link->conf.Present = stk->parse.config.rmask[0];
 
-    tuple.DesiredTuple = CISTPL_MANFID;
-    if (!pcmcia_get_first_tuple(link, &tuple) &&
-	!pcmcia_get_tuple_data(link, &tuple) &&
-	!pcmcia_parse_tuple(link, &tuple, &stk->parse))
-	is_kme = ((stk->parse.manfid.manf == MANFID_KME) &&
-		  ((stk->parse.manfid.card == PRODID_KME_KXLC005_A) ||
-		   (stk->parse.manfid.card == PRODID_KME_KXLC005_B)));
+    is_kme = ((link->manf_id == MANFID_KME) &&
+	      ((link->card_id == PRODID_KME_KXLC005_A) ||
+	       (link->card_id == PRODID_KME_KXLC005_B)));
 
     /* Not sure if this is right... look up the current Vcc */
     CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &stk->conf));

drivers/net/pcmcia/3c589_cs.c

@@ -272,17 +272,13 @@ static int tc589_config(struct pcmcia_device *link)
     CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse));
     link->conf.ConfigBase = parse.config.base;
     link->conf.Present = parse.config.rmask[0];
+    tuple.Attributes = TUPLE_RETURN_COMMON;
 
     /* Is this a 3c562? */
-    tuple.DesiredTuple = CISTPL_MANFID;
-    tuple.Attributes = TUPLE_RETURN_COMMON;
-    if ((pcmcia_get_first_tuple(link, &tuple) == CS_SUCCESS) &&
-	(pcmcia_get_tuple_data(link, &tuple) == CS_SUCCESS)) {
-	if (le16_to_cpu(buf[0]) != MANFID_3COM)
+    if (link->manf_id != MANFID_3COM)
 	    printk(KERN_INFO "3c589_cs: hmmm, is this really a "
 		   "3Com card??\n");
-	multi = (le16_to_cpu(buf[1]) == PRODID_3COM_3C562);
-    }
+    multi = (link->card_id == PRODID_3COM_3C562);
 
     /* For the 3c562, the base address must be xx00-xx7f */
     link->io.IOAddrLines = 16;

drivers/net/pcmcia/fmvj18x_cs.c

@@ -374,17 +374,12 @@ static int fmvj18x_config(struct pcmcia_device *link)
 	CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
 	CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse));
 	link->conf.ConfigIndex = parse.cftable_entry.index;
-	tuple.DesiredTuple = CISTPL_MANFID;
-	if (pcmcia_get_first_tuple(link, &tuple) == CS_SUCCESS)
-	    CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
-	else
-	    buf[0] = 0xffff;
-	switch (le16_to_cpu(buf[0])) {
+	switch (link->manf_id) {
 	case MANFID_TDK:
 	    cardtype = TDK;
-	    if (le16_to_cpu(buf[1]) == PRODID_TDK_GN3410
-			|| le16_to_cpu(buf[1]) == PRODID_TDK_NP9610
-			|| le16_to_cpu(buf[1]) == PRODID_TDK_MN3200) {
+	    if (link->card_id == PRODID_TDK_GN3410
+			|| link->card_id == PRODID_TDK_NP9610
+			|| link->card_id == PRODID_TDK_MN3200) {
 		/* MultiFunction Card */
 		link->conf.ConfigBase = 0x800;
 		link->conf.ConfigIndex = 0x47;
@@ -395,11 +390,11 @@ static int fmvj18x_config(struct pcmcia_device *link)
 	    cardtype = CONTEC;
 	    break;
 	case MANFID_FUJITSU:
-	    if (le16_to_cpu(buf[1]) == PRODID_FUJITSU_MBH10302)
+	    if (link->card_id == PRODID_FUJITSU_MBH10302)
                 /* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302),
                    but these are MBH10304 based card. */ 
 		cardtype = MBH10304;
-	    else if (le16_to_cpu(buf[1]) == PRODID_FUJITSU_MBH10304)
+	    else if (link->card_id == PRODID_FUJITSU_MBH10304)
 		cardtype = MBH10304;
 	    else
 		cardtype = LA501;
@@ -409,14 +404,9 @@ static int fmvj18x_config(struct pcmcia_device *link)
 	}
     } else {
 	/* old type card */
-	tuple.DesiredTuple = CISTPL_MANFID;
-	if (pcmcia_get_first_tuple(link, &tuple) == CS_SUCCESS)
-	    CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
-	else
-	    buf[0] = 0xffff;
-	switch (le16_to_cpu(buf[0])) {
+	switch (link->manf_id) {
 	case MANFID_FUJITSU:
-	    if (le16_to_cpu(buf[1]) == PRODID_FUJITSU_MBH10304) {
+	    if (link->card_id == PRODID_FUJITSU_MBH10304) {
 		cardtype = XXX10304;    /* MBH10304 with buggy CIS */
 	        link->conf.ConfigIndex = 0x20;
 	    } else {

drivers/net/pcmcia/pcnet_cs.c

@@ -519,7 +519,7 @@ static int pcnet_config(struct pcmcia_device *link)
     tuple_t tuple;
     cisparse_t parse;
     int i, last_ret, last_fn, start_pg, stop_pg, cm_offset;
-    int manfid = 0, prodid = 0, has_shmem = 0;
+    int has_shmem = 0;
     u_short buf[64];
     hw_info_t *hw_info;
 
@@ -536,14 +536,6 @@ static int pcnet_config(struct pcmcia_device *link)
     link->conf.ConfigBase = parse.config.base;
     link->conf.Present = parse.config.rmask[0];
 
-    tuple.DesiredTuple = CISTPL_MANFID;
-    tuple.Attributes = TUPLE_RETURN_COMMON;
-    if ((pcmcia_get_first_tuple(link, &tuple) == CS_SUCCESS) &&
- 	(pcmcia_get_tuple_data(link, &tuple) == CS_SUCCESS)) {
-	manfid = le16_to_cpu(buf[0]);
-	prodid = le16_to_cpu(buf[1]);
-    }
-
     tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
     tuple.Attributes = 0;
     CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
@@ -589,8 +581,8 @@ static int pcnet_config(struct pcmcia_device *link)
 	link->conf.Attributes |= CONF_ENABLE_SPKR;
 	link->conf.Status = CCSR_AUDIO_ENA;
     }
-    if ((manfid == MANFID_IBM) &&
-	(prodid == PRODID_IBM_HOME_AND_AWAY))
+    if ((link->manf_id == MANFID_IBM) &&
+	(link->card_id == PRODID_IBM_HOME_AND_AWAY))
 	link->conf.ConfigIndex |= 0x10;
 
     CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
@@ -624,10 +616,10 @@ static int pcnet_config(struct pcmcia_device *link)
     info->flags = hw_info->flags;
     /* Check for user overrides */
     info->flags |= (delay_output) ? DELAY_OUTPUT : 0;
-    if ((manfid == MANFID_SOCKET) &&
-	((prodid == PRODID_SOCKET_LPE) ||
-	 (prodid == PRODID_SOCKET_LPE_CF) ||
-	 (prodid == PRODID_SOCKET_EIO)))
+    if ((link->manf_id == MANFID_SOCKET) &&
+	((link->card_id == PRODID_SOCKET_LPE) ||
+	 (link->card_id == PRODID_SOCKET_LPE_CF) ||
+	 (link->card_id == PRODID_SOCKET_EIO)))
 	info->flags &= ~USE_BIG_BUF;
     if (!use_big_buf)
 	info->flags &= ~USE_BIG_BUF;

drivers/net/pcmcia/smc91c92_cs.c

@@ -999,12 +999,8 @@ static int smc91c92_config(struct pcmcia_device *link)
     link->conf.ConfigBase = parse->config.base;
     link->conf.Present = parse->config.rmask[0];
 
-    tuple->DesiredTuple = CISTPL_MANFID;
-    tuple->Attributes = TUPLE_RETURN_COMMON;
-    if (first_tuple(link, tuple, parse) == CS_SUCCESS) {
-	smc->manfid = parse->manfid.manf;
-	smc->cardid = parse->manfid.card;
-    }
+    smc->manfid = link->manf_id;
+    smc->cardid = link->card_id;
 
     if ((smc->manfid == MANFID_OSITECH) &&
 	(smc->cardid != PRODID_OSITECH_SEVEN)) {

drivers/net/wireless/hostap/hostap_cs.c

@@ -293,15 +293,12 @@ static int sandisk_enable_wireless(struct net_device *dev)
 		goto done;
 	}
 
-	tuple.DesiredTuple = CISTPL_MANFID;
 	tuple.Attributes = TUPLE_RETURN_COMMON;
 	tuple.TupleData = buf;
 	tuple.TupleDataMax = sizeof(buf);
 	tuple.TupleOffset = 0;
-	if (pcmcia_get_first_tuple(hw_priv->link, &tuple) ||
-	    pcmcia_get_tuple_data(hw_priv->link, &tuple) ||
-	    pcmcia_parse_tuple(hw_priv->link, &tuple, parse) ||
-	    parse->manfid.manf != 0xd601 || parse->manfid.card != 0x0101) {
+
+	if (hw_priv->link->manf_id != 0xd601 || hw_priv->link->card_id != 0x0101) {
 		/* No SanDisk manfid found */
 		ret = -ENODEV;
 		goto done;

drivers/scsi/pcmcia/qlogic_stub.c

@@ -217,9 +217,7 @@ static int qlogic_config(struct pcmcia_device * link)
 	CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse));
 	link->conf.ConfigBase = parse.config.base;
 
-	tuple.DesiredTuple = CISTPL_MANFID;
-	if ((pcmcia_get_first_tuple(link, &tuple) == CS_SUCCESS) && (pcmcia_get_tuple_data(link, &tuple) == CS_SUCCESS))
-		info->manf_id = le16_to_cpu(tuple.TupleData[0]);
+	info->manf_id = link->manf_id;
 
 	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
 	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));

drivers/scsi/pcmcia/sym53c500_cs.c

@@ -731,10 +731,7 @@ SYM53C500_config(struct pcmcia_device *link)
 	CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse));
 	link->conf.ConfigBase = parse.config.base;
 
-	tuple.DesiredTuple = CISTPL_MANFID;
-	if ((pcmcia_get_first_tuple(link, &tuple) == CS_SUCCESS) &&
-	    (pcmcia_get_tuple_data(link, &tuple) == CS_SUCCESS))
-		info->manf_id = le16_to_cpu(tuple.TupleData[0]);
+	info->manf_id = link->manf_id;
 
 	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
 	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));

drivers/serial/serial_cs.c

@@ -757,9 +757,8 @@ static int serial_config(struct pcmcia_device * link)
 
 	/* Is this a multiport card? */
 	tuple->DesiredTuple = CISTPL_MANFID;
-	if (first_tuple(link, tuple, parse) == CS_SUCCESS) {
-		info->manfid = parse->manfid.manf;
-		info->prodid = parse->manfid.card;
+	info->manfid = link->manf_id;
+	info->prodid = link->card_id;
 
 	for (i = 0; i < ARRAY_SIZE(quirks); i++)
 		if ((quirks[i].manfid == ~0 ||
@@ -769,15 +768,14 @@ static int serial_config(struct pcmcia_device * link)
 			info->quirk = &quirks[i];
 			break;
 		}
-	}
 
 	/* Another check for dual-serial cards: look for either serial or
 	   multifunction cards that ask for appropriate IO port ranges */
 	tuple->DesiredTuple = CISTPL_FUNCID;
 	if ((info->multi == 0) &&
-	    ((first_tuple(link, tuple, parse) != CS_SUCCESS) ||
-	     (parse->funcid.func == CISTPL_FUNCID_MULTI) ||
-	     (parse->funcid.func == CISTPL_FUNCID_SERIAL))) {
+	    (link->has_func_id) &&
+	    ((link->func_id == CISTPL_FUNCID_MULTI) ||
+	     (link->func_id == CISTPL_FUNCID_SERIAL))) {
 		tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
 		if (first_tuple(link, tuple, parse) == CS_SUCCESS) {
 			if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))