Commit f00a20ef authored by Rafael J. Wysocki's avatar Rafael J. Wysocki

PCI PM: Use pci_set_power_state during early resume

Once we have allowed timer interrupts to be enabled during the early
phase of resuming devices, we are now able to use the generic
pci_set_power_state() to put PCI devices into D0 at that time.  Then,
the platform-specific PM code will have a chance to handle devices
that don't implement the native PCI PM or that require some
additional, platform-specific operations to be carried out to power
them up.  Also, by doing this we can simplify the code quite a bit.
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
Acked-by: default avatarIngo Molnar <mingo@elte.hu>
Acked-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
parent 57ef8026
......@@ -426,7 +426,6 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable)
* given PCI device
* @dev: PCI device to handle.
* @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
* @wait: If 'true', wait for the device to change its power state
*
* RETURN VALUE:
* -EINVAL if the requested state is invalid.
......@@ -435,8 +434,7 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable)
* 0 if device already is in the requested state.
* 0 if device's power state has been successfully changed.
*/
static int
pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait)
static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
{
u16 pmcsr;
bool need_restore = false;
......@@ -481,10 +479,8 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait)
break;
case PCI_UNKNOWN: /* Boot-up */
if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
&& !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) {
&& !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
need_restore = true;
wait = true;
}
/* Fall-through: force to D0 */
default:
pmcsr = 0;
......@@ -494,9 +490,6 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait)
/* enter specified state */
pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
if (!wait)
return 0;
/* Mandatory power management transition delays */
/* see PCI PM 1.1 5.6.1 table 18 */
if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
......@@ -521,7 +514,7 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait)
if (need_restore)
pci_restore_bars(dev);
if (wait && dev->bus->self)
if (dev->bus->self)
pcie_aspm_pm_state_change(dev->bus->self);
return 0;
......@@ -591,7 +584,7 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
return 0;
error = pci_raw_set_power_state(dev, state, true);
error = pci_raw_set_power_state(dev, state);
if (state > PCI_D0 && platform_pci_power_manageable(dev)) {
/* Allow the platform to finalize the transition */
......@@ -1390,37 +1383,14 @@ void pci_allocate_cap_save_buffers(struct pci_dev *dev)
*/
int pci_restore_standard_config(struct pci_dev *dev)
{
pci_power_t prev_state;
int error;
pci_update_current_state(dev, PCI_D0);
prev_state = dev->current_state;
if (prev_state == PCI_D0)
goto Restore;
pci_update_current_state(dev, PCI_UNKNOWN);
error = pci_raw_set_power_state(dev, PCI_D0, false);
if (dev->current_state != PCI_D0) {
int error = pci_set_power_state(dev, PCI_D0);
if (error)
return error;
/*
* This assumes that we won't get a bus in B2 or B3 from the BIOS, but
* we've made this assumption forever and it appears to be universally
* satisfied.
*/
switch(prev_state) {
case PCI_D3cold:
case PCI_D3hot:
mdelay(pci_pm_d3_delay);
break;
case PCI_D2:
udelay(PCI_PM_D2_DELAY);
break;
}
pci_update_current_state(dev, PCI_D0);
Restore:
return dev->state_saved ? pci_restore_state(dev) : 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment