Merge tag 'newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull support for three new arm SoC types from Arnd Bergmann:

 - The mvebu platform includes Marvell's Armada XP and Armada 370 chips,
   made by the mvebu business unit inside of Marvell.  Since the same
   group also made the older but similar platforms we call "orion5x",
   "kirkwood", "mv78xx0" and "dove", we plan to move all of them into
   the mach-mvebu directory in the future.

 - socfpga is Altera's platform based on Cortex-A9 cores and a lot of
   FPGA space.  This is similar to the Xilinx zynq platform we already
   support.  The code is particularly clean, which is helped by the fact
   that the hardware doesn't do much besides the parts that are expected
   to get added in the FPGA.

 - The OMAP subarchitecture gains support for the latest generation, the
   OMAP5 based on the new Cortex-A15 core.  Support is rather
   rudimentary for now, but will be extended in the future.

* tag 'newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits)
  ARM: socfpga: initial support for Altera's SOCFPGA platform
  arm: mvebu: generate DTBs for supported SoCs
  ARM: mvebu: MPIC: read number of interrupts from control register
  arm: mach-mvebu: add entry to MAINTAINERS
  arm: mach-mvebu: add compilation/configuration change
  arm: mach-mvebu: add defconfig
  arm: mach-mvebu: add documentation for new device tree bindings
  arm: mach-mvebu: add support for Armada 370 and Armada XP with DT
  arm: mach-mvebu: add source files
  arm: mach-mvebu: add header
  clocksource: time-armada-370-xp: Marvell Armada 370/XP SoC timer driver
  ARM: Kconfig update to support additional GPIOs in OMAP5
  ARM: OMAP5: Add the build support
  arm/dts: OMAP5: Add omap5 dts files
  ARM: OMAP5: board-generic: Add device tree support
  ARM: omap2+: board-generic: clean up the irq data from board file
  ARM: OMAP5: Add SMP support
  ARM: OMAP5: Add the WakeupGen IP updates
  ARM: OMAP5: l3: Add l3 error handler support for omap5
  ARM: OMAP5: gpmc: Update gpmc_init()
  ...

Conflicts:
	Documentation/devicetree/bindings/arm/omap/omap.txt
	arch/arm/mach-omap2/Makefile
	drivers/clocksource/Kconfig
	drivers/clocksource/Makefile

Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt

+Marvell Armada 370 and Armada XP Interrupt Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible: Should be "marvell,mpic"
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt-cells: The number of cells to define the interrupts. Should be 1.
+  The cell is the IRQ number
+- reg: Should contain PMIC registers location and length. First pair
+  for the main interrupt registers, second pair for the per-CPU
+  interrupt registers
+
+Example:
+
+        mpic: interrupt-controller@d0020000 {
+              compatible = "marvell,mpic";
+              #interrupt-cells = <1>;
+              #address-cells = <1>;
+              #size-cells = <1>;
+              interrupt-controller;
+              reg = <0xd0020000 0x1000>,
+                    <0xd0021000 0x1000>;
+        };

Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt

+Marvell Armada 370 and Armada XP Global Timers
+----------------------------------------------
+
+Required properties:
+- compatible: Should be "marvell,armada-370-xp-timer"
+- interrupts: Should contain the list of Global Timer interrupts
+- reg: Should contain the base address of the Global Timer registers
+
+Optional properties:
+- marvell,timer-25Mhz: Tells whether the Global timer supports the 25
+  Mhz fixed mode (available on Armada XP and not on Armada 370)

Documentation/devicetree/bindings/arm/armada-370-xp.txt

+Marvell Armada 370 and Armada XP Platforms Device Tree Bindings
+---------------------------------------------------------------
+
+Boards with a SoC of the Marvell Armada 370 and Armada XP families
+shall have the following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armada-370-xp"
+
+In addition, boards using the Marvell Armada 370 SoC shall have the
+following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armada370"
+
+In addition, boards using the Marvell Armada XP SoC shall have the
+following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armadaxp"
+

Documentation/devicetree/bindings/arm/mvebu-system-controller.txt

+MVEBU System Controller
+-----------------------
+MVEBU (Marvell SOCs: Armada 370/XP, Dove, mv78xx0, Kirkwood, Orion5x)
+
+Required properties:
+
+- compatible: one of:
+	- "marvell,orion-system-controller"
+	- "marvell,armada-370-xp-system-controller"
+- reg: Should contain system controller registers location and length.
+
+Example:
+
+	system-controller@d0018200 {
+		compatible = "marvell,armada-370-xp-system-controller";
+		reg = <0xd0018200 0x500>;
+	};

Documentation/devicetree/bindings/arm/omap/omap.txt

@@ -50,3 +50,6 @@ Boards:
 
 - AM335X Bone : Low cost community board
   compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3"
+
+- OMAP5 EVM : Evaluation Module
+  compatible = "ti,omap5-evm", "ti,omap5"

MAINTAINERS

@@ -894,6 +894,14 @@ ARM/MAGICIAN MACHINE SUPPORT
 M:	Philipp Zabel <philipp.zabel@gmail.com>
 S:	Maintained
 
+ARM/Marvell Armada 370 and Armada XP SOC support
+M:	Jason Cooper <jason@lakedaemon.net>
+M:	Andrew Lunn <andrew@lunn.ch>
+M:	Gregory Clement <gregory.clement@free-electrons.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-mvebu/
+
 ARM/Marvell Dove/Kirkwood/MV78xx0/Orion SOC support
 M:	Jason Cooper <jason@lakedaemon.net>
 M:	Andrew Lunn <andrew@lunn.ch>
@@ -1103,6 +1111,16 @@ S:	Supported
 F:	arch/arm/mach-shmobile/
 F:	drivers/sh/
 
+ARM/SOCFPGA ARCHITECTURE
+M:	Dinh Nguyen <dinguyen@altera.com>
+S:	Maintained
+F:	arch/arm/mach-socfpga/
+
+ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT
+M:	Dinh Nguyen <dinguyen@altera.com>
+S:	Maintained
+F:	drivers/clk/socfpga/
+
 ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)

arch/arm/Kconfig

@@ -250,6 +250,25 @@ choice
 	prompt "ARM system type"
 	default ARCH_VERSATILE
 
+config ARCH_SOCFPGA
+	bool "Altera SOCFPGA family"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select ARM_AMBA
+	select ARM_GIC
+	select CACHE_L2X0
+	select CLKDEV_LOOKUP
+	select COMMON_CLK
+	select CPU_V7
+	select DW_APB_TIMER
+	select DW_APB_TIMER_OF
+	select GENERIC_CLOCKEVENTS
+	select GPIO_PL061 if GPIOLIB
+	select HAVE_ARM_SCU
+	select SPARSE_IRQ
+	select USE_OF
+	help
+	  This enables support for Altera SOCFPGA Cyclone V platform
+
 config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
@@ -537,6 +556,18 @@ config ARCH_IXP4XX
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 
+config ARCH_MVEBU
+	bool "Marvell SOCs with Device Tree support"
+	select GENERIC_CLOCKEVENTS
+	select MULTI_IRQ_HANDLER
+	select SPARSE_IRQ
+	select CLKSRC_MMIO
+	select GENERIC_IRQ_CHIP
+	select IRQ_DOMAIN
+	select COMMON_CLK
+	help
+	  Support for the Marvell SoC Family with device tree support
+
 config ARCH_DOVE
 	bool "Marvell Dove"
 	select CPU_V7
@@ -994,6 +1025,8 @@ endchoice
 # Kconfigs may be included either alphabetically (according to the
 # plat- suffix) or along side the corresponding mach-* source.
 #
+source "arch/arm/mach-mvebu/Kconfig"
+
 source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/mach-bcmring/Kconfig"
@@ -1586,6 +1619,7 @@ config ARCH_NR_GPIO
 	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
 	default 355 if ARCH_U8500
 	default 264 if MACH_H4700
+	default 512 if SOC_OMAP5
 	default 0
 	help
 	  Maximum number of GPIOs in the system.

arch/arm/Makefile

@@ -157,6 +157,7 @@ machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
 machine-$(CONFIG_ARCH_IMX_V4_V5)	:= imx
 machine-$(CONFIG_ARCH_IMX_V6_V7)	:= imx
 machine-$(CONFIG_ARCH_MXS)		:= mxs
+machine-$(CONFIG_ARCH_MVEBU)		:= mvebu
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
 machine-$(CONFIG_ARCH_OMAP1)		:= omap1
@@ -186,6 +187,7 @@ machine-$(CONFIG_ARCH_VEXPRESS)		:= vexpress
 machine-$(CONFIG_ARCH_VT8500)		:= vt8500
 machine-$(CONFIG_ARCH_W90X900)		:= w90x900
 machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
+machine-$(CONFIG_ARCH_SOCFPGA)		:= socfpga
 machine-$(CONFIG_MACH_SPEAR1310)	:= spear13xx
 machine-$(CONFIG_MACH_SPEAR1340)	:= spear13xx
 machine-$(CONFIG_MACH_SPEAR300)		:= spear3xx

arch/arm/boot/dts/armada-370-db.dts

+/*
+ * Device Tree file for Marvell Armada 370 evaluation board
+ * (DB-88F6710-BP-DDR3)
+ *
+ *  Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "armada-370.dtsi"
+
+/ {
+	model = "Marvell Armada 370 Evaluation Board";
+	compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		serial@d0012000 {
+			clock-frequency = <200000000>;
+			status = "okay";
+		};
+		timer@d0020300 {
+			clock-frequency = <600000000>;
+			status = "okay";
+		};
+	};
+};

arch/arm/boot/dts/armada-370-xp.dtsi

+/*
+ * Device Tree Include file for Marvell Armada 370 and Armada XP SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Ben Dooks <ben.dooks@codethink.co.uk>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are common to the Armada
+ * 370 and Armada XP SoC.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Marvell Armada 370 and XP SoC";
+	compatible = "marvell,armada_370_xp";
+
+	cpus {
+		cpu@0 {
+			compatible = "marvell,sheeva-v7";
+		};
+	};
+
+	mpic: interrupt-controller@d0020000 {
+	      compatible = "marvell,mpic";
+	      #interrupt-cells = <1>;
+	      #address-cells = <1>;
+	      #size-cells = <1>;
+	      interrupt-controller;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&mpic>;
+		ranges;
+
+		serial@d0012000 {
+				compatible = "ns16550";
+				reg = <0xd0012000 0x100>;
+				reg-shift = <2>;
+				interrupts = <41>;
+				status = "disabled";
+		};
+		serial@d0012100 {
+				compatible = "ns16550";
+				reg = <0xd0012100 0x100>;
+				reg-shift = <2>;
+				interrupts = <42>;
+				status = "disabled";
+		};
+
+		timer@d0020300 {
+			       compatible = "marvell,armada-370-xp-timer";
+			       reg = <0xd0020300 0x30>;
+			       interrupts = <37>, <38>, <39>, <40>;
+		};
+	};
+};
+

arch/arm/boot/dts/armada-370.dtsi

+/*
+ * Device Tree Include file for Marvell Armada 370 family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada 370 SoC that are not
+ * common to all Armada SoCs.
+ */
+
+/include/ "armada-370-xp.dtsi"
+
+/ {
+	model = "Marvell Armada 370 family SoC";
+	compatible = "marvell,armada370", "marvell,armada-370-xp";
+
+	mpic: interrupt-controller@d0020000 {
+	      reg = <0xd0020a00 0x1d0>,
+		    <0xd0021870 0x58>;
+	};
+
+	soc {
+		system-controller@d0018200 {
+				compatible = "marvell,armada-370-xp-system-controller";
+				reg = <0xd0018200 0x100>;
+		};
+	};
+};

arch/arm/boot/dts/armada-xp-db.dts

+/*
+ * Device Tree file for Marvell Armada XP evaluation board
+ * (DB-78460-BP)
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP Evaluation Board";
+	compatible = "marvell,axp-db", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		serial@d0012000 {
+			clock-frequency = <250000000>;
+			status = "okay";
+		};
+		serial@d0012100 {
+			clock-frequency = <250000000>;
+			status = "okay";
+		};
+		serial@d0012200 {
+			clock-frequency = <250000000>;
+			status = "okay";
+		};
+		serial@d0012300 {
+			clock-frequency = <250000000>;
+			status = "okay";
+		};
+	};
+};

arch/arm/boot/dts/armada-xp.dtsi

+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Ben Dooks <ben.dooks@codethink.co.uk>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada 370 SoC that are not
+ * common to all Armada SoCs.
+ */
+
+/include/ "armada-370-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP family SoC";
+	compatible = "marvell,armadaxp", "marvell,armada-370-xp";
+
+	mpic: interrupt-controller@d0020000 {
+	      reg = <0xd0020a00 0x1d0>,
+		    <0xd0021870 0x58>;
+	};
+
+	soc {
+		serial@d0012200 {
+				compatible = "ns16550";
+				reg = <0xd0012200 0x100>;
+				reg-shift = <2>;
+				interrupts = <43>;
+				status = "disabled";
+		};
+		serial@d0012300 {
+				compatible = "ns16550";
+				reg = <0xd0012300 0x100>;
+				reg-shift = <2>;
+				interrupts = <44>;
+				status = "disabled";
+		};
+
+		timer@d0020300 {
+				marvell,timer-25Mhz;
+		};
+
+		system-controller@d0018200 {
+				compatible = "marvell,armada-370-xp-system-controller";
+				reg = <0xd0018200 0x500>;
+		};
+	};
+};

arch/arm/boot/dts/omap5-evm.dts

+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap5.dtsi"
+
+/ {
+	model = "TI OMAP5 EVM board";
+	compatible = "ti,omap5-evm", "ti,omap5";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+};

arch/arm/boot/dts/omap5.dtsi

+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * Based on "omap4.dtsi"
+ */
+
+/*
+ * Carveout for multimedia usecases
+ * It should be the last 48MB of the first 512MB memory part
+ * In theory, it should not even exist. That zone should be reserved
+ * dynamically during the .reserve callback.
+ */
+/memreserve/ 0x9d000000 0x03000000;
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "ti,omap5";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+		};
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+		};
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is uses for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap5-mpu";
+			ti,hwmods = "mpu";
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the OMAP3 interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 * Since that will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp {
+		compatible = "ti,omap4-l3-noc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+
+		gic: interrupt-controller@48211000 {
+			compatible = "arm,cortex-a15-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x48211000 0x1000>,
+			      <0x48212000 0x1000>;
+		};
+
+		gpio1: gpio@4ae10000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio1";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio2: gpio@48055000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio2";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio3: gpio@48057000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio3";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio4: gpio@48059000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio4";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio5: gpio@4805b000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio5";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio6: gpio@4805d000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio6";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio7: gpio@48051000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio7";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio8: gpio@48053000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio8";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart1: serial@4806a000 {
+			compatible = "ti,omap4-uart";
+			ti,hwmods = "uart1";
+			clock-frequency = <48000000>;
+		};
+
+		uart2: serial@4806c000 {
+			compatible = "ti,omap4-uart";
+			ti,hwmods = "uart2";
+			clock-frequency = <48000000>;
+		};
+
+		uart3: serial@48020000 {
+			compatible = "ti,omap4-uart";
+			ti,hwmods = "uart3";
+			clock-frequency = <48000000>;
+		};
+
+		uart4: serial@4806e000 {
+			compatible = "ti,omap4-uart";
+			ti,hwmods = "uart4";
+			clock-frequency = <48000000>;
+		};
+
+		uart5: serial@48066000 {
+			compatible = "ti,omap5-uart";
+			ti,hwmods = "uart5";
+			clock-frequency = <48000000>;
+		};
+
+		uart6: serial@48068000 {
+			compatible = "ti,omap6-uart";
+			ti,hwmods = "uart6";
+			clock-frequency = <48000000>;
+		};
+	};
+};

arch/arm/boot/dts/socfpga.dtsi

+/*
+ *  Copyright (C) 2012 Altera <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &gmac0;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	intc: intc@fffed000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xfffed000 0x1000>,
+		      <0xfffec100 0x100>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		device_type = "soc";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		amba {
+			compatible = "arm,amba-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pdma: pdma@ffe01000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0xffe01000 0x1000>;
+				interrupts = <0 180 4>;
+			};
+		};
+
+		gmac0: stmmac@ff700000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
+			reg = <0xff700000 0x2000>;
+			interrupts = <0 115 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
+			phy-mode = "gmii";
+		};
+
+		L2: l2-cache@fffef000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xfffef000 0x1000>;
+			interrupts = <0 38 0x04>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		/* Local timer */
+		timer@fffec600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xfffec600 0x100>;
+			interrupts = <1 13 0xf04>;
+		};
+
+		timer0: timer@ffc08000 {
+			compatible = "snps,dw-apb-timer-sp";
+			interrupts = <0 167 4>;
+			clock-frequency = <200000000>;
+			reg = <0xffc08000 0x1000>;
+		};
+
+		timer1: timer@ffc09000 {
+			compatible = "snps,dw-apb-timer-sp";
+			interrupts = <0 168 4>;
+			clock-frequency = <200000000>;
+			reg = <0xffc09000 0x1000>;
+		};
+
+		timer2: timer@ffd00000 {
+			compatible = "snps,dw-apb-timer-osc";
+			interrupts = <0 169 4>;
+			clock-frequency = <200000000>;
+			reg = <0xffd00000 0x1000>;
+		};
+
+		timer3: timer@ffd01000 {
+			compatible = "snps,dw-apb-timer-osc";
+			interrupts = <0 170 4>;
+			clock-frequency = <200000000>;
+			reg = <0xffd01000 0x1000>;
+		};
+
+		uart0: uart@ffc02000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02000 0x1000>;
+			clock-frequency = <7372800>;
+			interrupts = <0 162 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		uart1: uart@ffc03000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc03000 0x1000>;
+			clock-frequency = <7372800>;
+			interrupts = <0 163 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+	};
+};

arch/arm/boot/dts/socfpga_cyclone5.dts

+/*
+ *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+/include/ "socfpga.dtsi"
+
+/ {
+	model = "Altera SOCFPGA Cyclone V";
+	compatible = "altr,socfpga-cyclone5";
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x10000000>; /* 256MB */
+	};
+};

arch/arm/configs/mvebu_defconfig

+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_MACH_ARMADA_370_XP=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_USE_OF=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_VFP=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_UTF8=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y

arch/arm/configs/omap2plus_defconfig

@@ -236,3 +236,4 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
 CONFIG_CRC7=y
 CONFIG_LIBCRC32C=y
+CONFIG_SOC_OMAP5=y

arch/arm/configs/socfpga_defconfig

+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_CPUSETS=y
+CONFIG_NAMESPACES=y
+CONFIG_EMBEDDED=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_SOCFPGA=y
+CONFIG_MACH_SOCFPGA_CYCLONE5=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_VMSPLIT_2G=y
+CONFIG_NR_CPUS=2
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_STMMAC_ETH=y
+# CONFIG_STMMAC_PHY_ID_ZERO_WORKAROUND is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_DW=y
+# CONFIG_RTC_HCTOSYS is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_ENABLE_DEFAULT_TRACERS=y
+CONFIG_DEBUG_USER=y
+CONFIG_XZ_DEC=y

arch/arm/mach-mvebu/Kconfig

+if ARCH_MVEBU
+
+menu "Marvell SOC with device tree"
+
+config MACH_ARMADA_370_XP
+	bool "Marvell Armada 370 and Aramada XP boards"
+	select ARMADA_370_XP_TIMER
+	select CPU_V7
+	help
+
+	  Say 'Y' here if you want your kernel to support boards based on
+	  Marvell Armada 370 or Armada XP with device tree.
+
+endmenu
+
+endif

arch/arm/mach-mvebu/Makefile

+obj-y += system-controller.o
+obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o

arch/arm/mach-mvebu/Makefile.boot

+zreladdr-y := 0x00008000
+dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-db.dtb
+dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-xp-db.dtb

arch/arm/mach-mvebu/armada-370-xp.c

+/*
+ * Device Tree support for Armada 370 and XP platforms.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/time-armada-370-xp.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <mach/armada-370-xp.h>
+#include "common.h"
+
+static struct map_desc armada_370_xp_io_desc[] __initdata = {
+	{
+		.virtual	= ARMADA_370_XP_REGS_VIRT_BASE,
+		.pfn		= __phys_to_pfn(ARMADA_370_XP_REGS_PHYS_BASE),
+		.length		= ARMADA_370_XP_REGS_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init armada_370_xp_map_io(void)
+{
+	iotable_init(armada_370_xp_io_desc, ARRAY_SIZE(armada_370_xp_io_desc));
+}
+
+struct sys_timer armada_370_xp_timer = {
+	.init		= armada_370_xp_timer_init,
+};
+
+static void __init armada_370_xp_dt_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char * const armada_370_xp_dt_board_dt_compat[] = {
+	"marvell,a370-db",
+	"marvell,axp-db",
+	NULL,
+};
+
+DT_MACHINE_START(ARMADA_XP_DT, "Marvell Aramada 370/XP (Device Tree)")
+	.init_machine	= armada_370_xp_dt_init,
+	.map_io		= armada_370_xp_map_io,
+	.init_irq	= armada_370_xp_init_irq,
+	.handle_irq     = armada_370_xp_handle_irq,
+	.timer		= &armada_370_xp_timer,
+	.restart	= mvebu_restart,
+	.dt_compat	= armada_370_xp_dt_board_dt_compat,
+MACHINE_END

arch/arm/mach-mvebu/common.h

+/*
+ * Core functions for Marvell System On Chip
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_MVEBU_COMMON_H
+#define __ARCH_MVEBU_COMMON_H
+
+void mvebu_restart(char mode, const char *cmd);
+
+void armada_370_xp_init_irq(void);
+void armada_370_xp_handle_irq(struct pt_regs *regs);
+
+#endif

arch/arm/mach-mvebu/include/mach/armada-370-xp.h

+/*
+ * Generic definitions for Marvell Armada_370_XP SoCs
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_ARMADA_370_XP_H
+#define __MACH_ARMADA_370_XP_H
+
+#define ARMADA_370_XP_REGS_PHYS_BASE	0xd0000000
+#define ARMADA_370_XP_REGS_VIRT_BASE	0xfeb00000
+#define ARMADA_370_XP_REGS_SIZE		SZ_1M
+
+#endif /* __MACH_ARMADA_370_XP_H */

arch/arm/mach-mvebu/include/mach/debug-macro.S

+/*
+ * Early serial output macro for Marvell  SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory Clement <gregory.clement@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/armada-370-xp.h>
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =ARMADA_370_XP_REGS_PHYS_BASE
+	ldr	\rv, =ARMADA_370_XP_REGS_VIRT_BASE
+	orr	\rp, \rp, #0x00012000
+	orr	\rv, \rv, #0x00012000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>

arch/arm/mach-mvebu/include/mach/timex.h

+/*
+ * Marvell Armada SoC time definitions
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE		(100 * HZ)

arch/arm/mach-mvebu/include/mach/uncompress.h

+/*
+ * Marvell Armada SoC kernel uncompression UART routines
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/armada-370-xp.h>
+
+#define UART_THR ((volatile unsigned char *)(ARMADA_370_XP_REGS_PHYS_BASE\
+								+ 0x12000))
+#define UART_LSR ((volatile unsigned char *)(ARMADA_370_XP_REGS_PHYS_BASE\
+								+ 0x12014))
+
+#define LSR_THRE	0x20
+
+static void putc(const char c)
+{
+	int i;
+
+	for (i = 0; i < 0x1000; i++) {
+		/* Transmit fifo not full? */
+		if (*UART_LSR & LSR_THRE)
+			break;
+	}
+
+	*UART_THR = c;
+}
+
+static void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()

arch/arm/mach-mvebu/irq-armada-370-xp.c

+/*
+ * Marvell Armada 370 and Armada XP SoC IRQ handling
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Ben Dooks <ben.dooks@codethink.co.uk>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/irqdomain.h>
+#include <asm/mach/arch.h>
+#include <asm/exception.h>
+
+/* Interrupt Controller Registers Map */
+#define ARMADA_370_XP_INT_SET_MASK_OFFS		(0x48)
+#define ARMADA_370_XP_INT_CLEAR_MASK_OFFS	(0x4C)
+
+#define ARMADA_370_XP_INT_CONTROL		(0x00)
+#define ARMADA_370_XP_INT_SET_ENABLE_OFFS	(0x30)
+#define ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS	(0x34)
+
+#define ARMADA_370_XP_CPU_INTACK_OFFS		(0x44)
+
+static void __iomem *per_cpu_int_base;
+static void __iomem *main_int_base;
+static struct irq_domain *armada_370_xp_mpic_domain;
+
+static void armada_370_xp_irq_mask(struct irq_data *d)
+{
+	writel(irqd_to_hwirq(d),
+	       per_cpu_int_base + ARMADA_370_XP_INT_SET_MASK_OFFS);
+}
+
+static void armada_370_xp_irq_unmask(struct irq_data *d)
+{
+	writel(irqd_to_hwirq(d),
+	       per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
+}
+
+static struct irq_chip armada_370_xp_irq_chip = {
+	.name		= "armada_370_xp_irq",
+	.irq_mask       = armada_370_xp_irq_mask,
+	.irq_mask_ack   = armada_370_xp_irq_mask,
+	.irq_unmask     = armada_370_xp_irq_unmask,
+};
+
+static int armada_370_xp_mpic_irq_map(struct irq_domain *h,
+				      unsigned int virq, irq_hw_number_t hw)
+{
+	armada_370_xp_irq_mask(irq_get_irq_data(virq));
+	writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS);
+
+	irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip,
+				 handle_level_irq);
+	irq_set_status_flags(virq, IRQ_LEVEL);
+	set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
+
+	return 0;
+}
+
+static struct irq_domain_ops armada_370_xp_mpic_irq_ops = {
+	.map = armada_370_xp_mpic_irq_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+static int __init armada_370_xp_mpic_of_init(struct device_node *node,
+					     struct device_node *parent)
+{
+	u32 control;
+
+	main_int_base = of_iomap(node, 0);
+	per_cpu_int_base = of_iomap(node, 1);
+
+	BUG_ON(!main_int_base);
+	BUG_ON(!per_cpu_int_base);
+
+	control = readl(main_int_base + ARMADA_370_XP_INT_CONTROL);
+
+	armada_370_xp_mpic_domain =
+	    irq_domain_add_linear(node, (control >> 2) & 0x3ff,
+				  &armada_370_xp_mpic_irq_ops, NULL);
+
+	if (!armada_370_xp_mpic_domain)
+		panic("Unable to add Armada_370_Xp MPIC irq domain (DT)\n");
+
+	irq_set_default_host(armada_370_xp_mpic_domain);
+	return 0;
+}
+
+asmlinkage void __exception_irq_entry armada_370_xp_handle_irq(struct pt_regs
+							       *regs)
+{
+	u32 irqstat, irqnr;
+
+	do {
+		irqstat = readl_relaxed(per_cpu_int_base +
+					ARMADA_370_XP_CPU_INTACK_OFFS);
+		irqnr = irqstat & 0x3FF;
+
+		if (irqnr < 1023) {
+			irqnr =
+			    irq_find_mapping(armada_370_xp_mpic_domain, irqnr);
+			handle_IRQ(irqnr, regs);
+			continue;
+		}
+
+		break;
+	} while (1);
+}
+
+static const struct of_device_id mpic_of_match[] __initconst = {
+	{.compatible = "marvell,mpic", .data = armada_370_xp_mpic_of_init},
+	{},
+};
+
+void __init armada_370_xp_init_irq(void)
+{
+	of_irq_init(mpic_of_match);
+}

arch/arm/mach-mvebu/system-controller.c

+/*
+ * System controller support for Armada 370 and XP platforms.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The Armada 370 and Armada XP SoCs both have a range of
+ * miscellaneous registers, that do not belong to a particular device,
+ * but rather provide system-level features. This basic
+ * system-controller driver provides a device tree binding for those
+ * registers, and implements utility functions offering various
+ * features related to those registers.
+ *
+ * For now, the feature set is limited to restarting the platform by a
+ * soft-reset, but it might be extended in the future.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+
+static void __iomem *system_controller_base;
+
+struct mvebu_system_controller {
+	u32 rstoutn_mask_offset;
+	u32 system_soft_reset_offset;
+
+	u32 rstoutn_mask_reset_out_en;
+	u32 system_soft_reset;
+};
+static struct mvebu_system_controller *mvebu_sc;
+
+const struct mvebu_system_controller armada_370_xp_system_controller = {
+	.rstoutn_mask_offset = 0x60,
+	.system_soft_reset_offset = 0x64,
+	.rstoutn_mask_reset_out_en = 0x1,
+	.system_soft_reset = 0x1,
+};
+
+const struct mvebu_system_controller orion_system_controller = {
+	.rstoutn_mask_offset = 0x108,
+	.system_soft_reset_offset = 0x10c,
+	.rstoutn_mask_reset_out_en = 0x4,
+	.system_soft_reset = 0x1,
+};
+
+static struct of_device_id of_system_controller_table[] = {
+	{
+		.compatible = "marvell,orion-system-controller",
+		.data = (void *) &orion_system_controller,
+	}, {
+		.compatible = "marvell,armada-370-xp-system-controller",
+		.data = (void *) &armada_370_xp_system_controller,
+	},
+	{ /* end of list */ },
+};
+
+void mvebu_restart(char mode, const char *cmd)
+{
+	if (!system_controller_base) {
+		pr_err("Cannot restart, system-controller not available: check the device tree\n");
+	} else {
+		/*
+		 * Enable soft reset to assert RSTOUTn.
+		 */
+		writel(mvebu_sc->rstoutn_mask_reset_out_en,
+			system_controller_base +
+			mvebu_sc->rstoutn_mask_offset);
+		/*
+		 * Assert soft reset.
+		 */
+		writel(mvebu_sc->system_soft_reset,
+			system_controller_base +
+			mvebu_sc->system_soft_reset_offset);
+	}
+
+	while (1)
+		;
+}
+
+static int __init mvebu_system_controller_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, of_system_controller_table);
+	if (np) {
+		const struct of_device_id *match =
+		    of_match_node(of_system_controller_table, np);
+		BUG_ON(!match);
+		system_controller_base = of_iomap(np, 0);
+		mvebu_sc = (struct mvebu_system_controller *)match->data;
+	}
+
+	return 0;
+}
+
+arch_initcall(mvebu_system_controller_init);

arch/arm/mach-omap2/Kconfig

@@ -9,7 +9,7 @@ config ARCH_OMAP2PLUS_TYPICAL
 	select REGULATOR
 	select PM_RUNTIME
 	select VFP
-	select NEON if ARCH_OMAP3 || ARCH_OMAP4
+	select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
 	select SERIAL_OMAP
 	select SERIAL_OMAP_CONSOLE
 	select I2C
@@ -63,6 +63,12 @@ config ARCH_OMAP4
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select ARM_CPU_SUSPEND if PM
 
+config SOC_OMAP5
+	bool "TI OMAP5"
+	select CPU_V7
+	select ARM_GIC
+	select HAVE_SMP
+
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
 

arch/arm/mach-omap2/Makefile

@@ -17,6 +17,7 @@ obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
 obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
 obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
+obj-$(CONFIG_SOC_OMAP5)	 += prm44xx.o $(hwmod-common) $(secure-common)
 
 ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
 obj-y += mcbsp.o
@@ -29,8 +30,10 @@ obj-$(CONFIG_SOC_HAS_OMAP2_SDRC)	+= sdrc.o
 
 obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= omap-hotplug.o
-obj-$(CONFIG_ARCH_OMAP4)		+= omap4-common.o omap-wakeupgen.o
-obj-$(CONFIG_ARCH_OMAP4)		+= sleep44xx.o
+omap-4-5-common				=  omap4-common.o omap-wakeupgen.o \
+					   sleep44xx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-4-5-common)
+obj-$(CONFIG_SOC_OMAP5)			+= $(omap-4-5-common)
 
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_omap-headsmp.o			:=-Wa,-march=armv7-a$(plus_sec)
@@ -69,6 +72,7 @@ obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
 obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o omap-mpuss-lowpower.o
+obj-$(CONFIG_SOC_OMAP5)			+= omap-mpuss-lowpower.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 obj-$(CONFIG_OMAP_SMARTREFLEX)          += sr_device.o smartreflex.o
 obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3)	+= smartreflex-class3.o
@@ -88,14 +92,16 @@ obj-$(CONFIG_ARCH_OMAP4)                += cpuidle44xx.o
 endif
 
 # PRCM
+omap-prcm-4-5-common			=  prcm.o cminst44xx.o cm44xx.o \
+					   prcm_mpu44xx.o prminst44xx.o \
+					   vc44xx_data.o vp44xx_data.o
 obj-y					+= prm_common.o
 obj-$(CONFIG_ARCH_OMAP2)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= vc3xxx_data.o vp3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4)		+= prcm.o cminst44xx.o cm44xx.o
-obj-$(CONFIG_ARCH_OMAP4)		+= prcm_mpu44xx.o prminst44xx.o
-obj-$(CONFIG_ARCH_OMAP4)		+= vc44xx_data.o vp44xx_data.o prm44xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= prcm.o prm33xx.o cm33xx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-prcm-4-5-common) prm44xx.o
+obj-$(CONFIG_SOC_OMAP5)			+= $(omap-prcm-4-5-common)
 
 # OMAP voltage domains
 voltagedomain-common			:= voltage.o vc.o vp.o
@@ -107,6 +113,7 @@ obj-$(CONFIG_ARCH_OMAP4)		+= $(voltagedomain-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= voltagedomains44xx_data.o
 obj-$(CONFIG_SOC_AM33XX)		+= $(voltagedomain-common)
 obj-$(CONFIG_SOC_AM33XX)                += voltagedomains33xx_data.o
+obj-$(CONFIG_SOC_OMAP5)			+= $(voltagedomain-common)
 
 # OMAP powerdomain framework
 powerdomain-common			+= powerdomain.o powerdomain-common.o
@@ -124,6 +131,8 @@ obj-$(CONFIG_ARCH_OMAP4)		+= powerdomains44xx_data.o
 obj-$(CONFIG_SOC_AM33XX)		+= $(powerdomain-common)
 obj-$(CONFIG_SOC_AM33XX)		+= powerdomain33xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= powerdomains33xx_data.o
+obj-$(CONFIG_SOC_OMAP5)			+= $(powerdomain-common)
+obj-$(CONFIG_SOC_OMAP5)			+= powerdomain44xx.o
 
 # PRCM clockdomain control
 clockdomain-common			+= clockdomain.o
@@ -142,6 +151,8 @@ obj-$(CONFIG_ARCH_OMAP4)		+= clockdomains44xx_data.o
 obj-$(CONFIG_SOC_AM33XX)		+= $(clockdomain-common)
 obj-$(CONFIG_SOC_AM33XX)		+= clockdomain33xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= clockdomains33xx_data.o
+obj-$(CONFIG_SOC_OMAP5)			+= $(clockdomain-common)
+obj-$(CONFIG_SOC_OMAP5)			+= clockdomain44xx.o
 
 # Clock framework
 obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common) clock2xxx.o
@@ -160,6 +171,8 @@ obj-$(CONFIG_ARCH_OMAP3)		+= clkt_iclk.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) clock44xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= dpll3xxx.o dpll44xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= $(clock-common) dpll3xxx.o
+obj-$(CONFIG_SOC_OMAP5)			+= $(clock-common)
+obj-$(CONFIG_SOC_OMAP5)			+= dpll3xxx.o dpll44xx.o
 
 # OMAP2 clock rate set data (old "OPP" data)
 obj-$(CONFIG_SOC_OMAP2420)		+= opp2420_data.o
@@ -187,6 +200,7 @@ obj-$(CONFIG_OMAP3_EMU)			+= emu.o
 # L3 interconnect
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_l3_smx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap_l3_noc.o
+obj-$(CONFIG_SOC_OMAP5)			+= omap_l3_noc.o
 
 obj-$(CONFIG_OMAP_MBOX_FWK)		+= mailbox_mach.o
 mailbox_mach-objs			:= mailbox.o

arch/arm/mach-omap2/board-generic.c

@@ -25,23 +25,12 @@
 #include "common-board-devices.h"
 
 #if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3))
-#define omap_intc_of_init	NULL
+#define intc_of_init	NULL
 #endif
 #ifndef CONFIG_ARCH_OMAP4
 #define gic_of_init		NULL
 #endif
 
-static struct of_device_id irq_match[] __initdata = {
-	{ .compatible = "ti,omap2-intc", .data = omap_intc_of_init, },
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-	{ }
-};
-
-static void __init omap_init_irq(void)
-{
-	of_irq_init(irq_match);
-}
-
 static struct of_device_id omap_dt_match_table[] __initdata = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "ti,omap-infra", },
@@ -65,7 +54,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
 	.reserve	= omap_reserve,
 	.map_io		= omap242x_map_io,
 	.init_early	= omap2420_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap_intc_of_init,
 	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap2_timer,
@@ -84,7 +73,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
 	.reserve	= omap_reserve,
 	.map_io		= omap243x_map_io,
 	.init_early	= omap2430_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap_intc_of_init,
 	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap2_timer,
@@ -103,7 +92,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3430_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap_intc_of_init,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap3_timer,
@@ -122,7 +111,7 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)")
 	.reserve	= omap_reserve,
 	.map_io		= am33xx_map_io,
 	.init_early	= am33xx_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap_intc_of_init,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap3_am33xx_timer,
@@ -140,7 +129,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
 	.reserve	= omap_reserve,
 	.map_io		= omap4_map_io,
 	.init_early	= omap4430_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap_gic_of_init,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= omap_generic_init,
 	.init_late	= omap4430_init_late,
@@ -149,3 +138,22 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
 	.restart	= omap_prcm_restart,
 MACHINE_END
 #endif
+
+#ifdef CONFIG_SOC_OMAP5
+static const char *omap5_boards_compat[] __initdata = {
+	"ti,omap5",
+	NULL,
+};
+
+DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)")
+	.reserve	= omap_reserve,
+	.map_io		= omap5_map_io,
+	.init_early	= omap5_init_early,
+	.init_irq	= omap_gic_of_init,
+	.handle_irq	= gic_handle_irq,
+	.init_machine	= omap_generic_init,
+	.timer		= &omap5_timer,
+	.dt_compat	= omap5_boards_compat,
+	.restart	= omap_prcm_restart,
+MACHINE_END
+#endif

arch/arm/mach-omap2/common.c

@@ -178,3 +178,27 @@ void __init omap4_map_io(void)
 }
 #endif
 
+#if defined(CONFIG_SOC_OMAP5)
+static struct omap_globals omap5_globals = {
+	.class	= OMAP54XX_CLASS,
+	.tap	= OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
+	.ctrl_pad	= OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE),
+	.cm2	= OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE),
+	.prcm_mpu = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE),
+};
+
+void __init omap2_set_globals_5xxx(void)
+{
+	omap2_set_globals_tap(&omap5_globals);
+	omap2_set_globals_control(&omap5_globals);
+	omap2_set_globals_prcm(&omap5_globals);
+}
+
+void __init omap5_map_io(void)
+{
+	omap5_map_common_io();
+}
+#endif

arch/arm/mach-omap2/common.h

@@ -115,6 +115,14 @@ static inline int omap_mux_late_init(void)
 }
 #endif
 
+#ifdef CONFIG_SOC_OMAP5
+extern void omap5_map_common_io(void);
+#else
+static inline void omap5_map_common_io(void)
+{
+}
+#endif
+
 extern void omap2_init_common_infrastructure(void);
 
 extern struct sys_timer omap2_timer;
@@ -122,6 +130,7 @@ extern struct sys_timer omap3_timer;
 extern struct sys_timer omap3_secure_timer;
 extern struct sys_timer omap3_am33xx_timer;
 extern struct sys_timer omap4_timer;
+extern struct sys_timer omap5_timer;
 
 void omap2420_init_early(void);
 void omap2430_init_early(void);
@@ -134,6 +143,7 @@ void am35xx_init_early(void);
 void ti81xx_init_early(void);
 void am33xx_init_early(void);
 void omap4430_init_early(void);
+void omap5_init_early(void);
 void omap3_init_late(void);	/* Do not use this one */
 void omap4430_init_late(void);
 void omap2420_init_late(void);
@@ -169,6 +179,7 @@ void omap2_set_globals_242x(void);
 void omap2_set_globals_243x(void);
 void omap2_set_globals_3xxx(void);
 void omap2_set_globals_443x(void);
+void omap2_set_globals_5xxx(void);
 void omap2_set_globals_ti81xx(void);
 void omap2_set_globals_am33xx(void);
 
@@ -188,6 +199,7 @@ void omap243x_map_io(void);
 void omap3_map_io(void);
 void am33xx_map_io(void);
 void omap4_map_io(void);
+void omap5_map_io(void);
 void ti81xx_map_io(void);
 void omap_barriers_init(void);
 
@@ -227,6 +239,8 @@ void omap3_intc_prepare_idle(void);
 void omap3_intc_resume_idle(void);
 void omap2_intc_handle_irq(struct pt_regs *regs);
 void omap3_intc_handle_irq(struct pt_regs *regs);
+void omap_intc_of_init(void);
+void omap_gic_of_init(void);
 
 #ifdef CONFIG_CACHE_L2X0
 extern void __iomem *omap4_get_l2cache_base(void);
@@ -234,10 +248,10 @@ extern void __iomem *omap4_get_l2cache_base(void);
 
 struct device_node;
 #ifdef CONFIG_OF
-int __init omap_intc_of_init(struct device_node *node,
+int __init intc_of_init(struct device_node *node,
 			     struct device_node *parent);
 #else
-int __init omap_intc_of_init(struct device_node *node,
+int __init intc_of_init(struct device_node *node,
 			     struct device_node *parent)
 {
 	return 0;
@@ -264,6 +278,7 @@ extern void omap_secondary_startup(void);
 extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
 extern void omap_auxcoreboot_addr(u32 cpu_addr);
 extern u32 omap_read_auxcoreboot0(void);
+extern void omap5_secondary_startup(void);
 #endif
 
 #if defined(CONFIG_SMP) && defined(CONFIG_PM)

arch/arm/mach-omap2/control.h

@@ -253,6 +253,10 @@
 /* TI81XX CONTROL_DEVCONF register offsets */
 #define TI81XX_CONTROL_DEVICE_ID	(TI81XX_CONTROL_DEVCONF + 0x000)
 
+/* OMAP54XX CONTROL STATUS register */
+#define OMAP5XXX_CONTROL_STATUS                0x134
+#define OMAP5_DEVICETYPE_MASK          (0x7 << 6)
+
 /*
  * REVISIT: This list of registers is not comprehensive - there are more
  * that should be added.

arch/arm/mach-omap2/devices.c

@@ -84,7 +84,7 @@ static int __init omap4_l3_init(void)
 	 * To avoid code running on other OMAPs in
 	 * multi-omap builds
 	 */
-	if (!(cpu_is_omap44xx()))
+	if (!cpu_is_omap44xx() && !soc_is_omap54xx())
 		return -ENODEV;
 
 	for (i = 0; i < L3_MODULES; i++) {

arch/arm/mach-omap2/gpmc.c

@@ -727,7 +727,8 @@ static int __init gpmc_init(void)
 		ck = "gpmc_fck";
 		l = OMAP34XX_GPMC_BASE;
 		gpmc_irq = INT_34XX_GPMC_IRQ;
-	} else if (cpu_is_omap44xx()) {
+	} else if (cpu_is_omap44xx() || soc_is_omap54xx()) {
+		/* Base address and irq number are same for OMAP4/5 */
 		ck = "gpmc_ck";
 		l = OMAP44XX_GPMC_BASE;
 		gpmc_irq = OMAP44XX_IRQ_GPMC;

arch/arm/mach-omap2/id.c

@@ -50,6 +50,11 @@ int omap_type(void)
 		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
 	} else if (cpu_is_omap44xx()) {
 		val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS);
+	} else if (soc_is_omap54xx()) {
+		val = omap_ctrl_readl(OMAP5XXX_CONTROL_STATUS);
+		val &= OMAP5_DEVICETYPE_MASK;
+		val >>= 6;
+		goto out;
 	} else {
 		pr_err("Cannot detect omap type!\n");
 		goto out;
@@ -100,7 +105,7 @@ static u16 tap_prod_id;
 
 void omap_get_die_id(struct omap_die_id *odi)
 {
-	if (cpu_is_omap44xx()) {
+	if (cpu_is_omap44xx() || soc_is_omap54xx()) {
 		odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0);
 		odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_1);
 		odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_2);
@@ -513,6 +518,41 @@ void __init omap4xxx_check_revision(void)
 		((omap_rev() >> 12) & 0xf), ((omap_rev() >> 8) & 0xf));
 }
 
+void __init omap5xxx_check_revision(void)
+{
+	u32 idcode;
+	u16 hawkeye;
+	u8 rev;
+
+	idcode = read_tap_reg(OMAP_TAP_IDCODE);
+	hawkeye = (idcode >> 12) & 0xffff;
+	rev = (idcode >> 28) & 0xff;
+	switch (hawkeye) {
+	case 0xb942:
+		switch (rev) {
+		case 0:
+		default:
+			omap_revision = OMAP5430_REV_ES1_0;
+		}
+		break;
+
+	case 0xb998:
+		switch (rev) {
+		case 0:
+		default:
+			omap_revision = OMAP5432_REV_ES1_0;
+		}
+		break;
+
+	default:
+		/* Unknown default to latest silicon rev as default*/
+		omap_revision = OMAP5430_REV_ES1_0;
+	}
+
+	pr_info("OMAP%04x ES%d.0\n",
+			omap_rev() >> 16, ((omap_rev() >> 12) & 0xf));
+}
+
 /*
  * Set up things for map_io and processor detection later on. Gets called
  * pretty much first thing from board init. For multi-omap, this gets

arch/arm/mach-omap2/include/mach/debug-macro.S

@@ -60,12 +60,12 @@ omap_uart_lsr:	.word	0
 		beq	23f			@ configure OMAP2UART3
 		cmp	\rp, #OMAP3UART3	@ only on 34xx
 		beq	33f			@ configure OMAP3UART3
-		cmp	\rp, #OMAP4UART3	@ only on 44xx
-		beq	43f			@ configure OMAP4UART3
+		cmp	\rp, #OMAP4UART3	@ only on 44xx/54xx
+		beq	43f			@ configure OMAP4/5UART3
 		cmp	\rp, #OMAP3UART4	@ only on 36xx
 		beq	34f			@ configure OMAP3UART4
-		cmp	\rp, #OMAP4UART4	@ only on 44xx
-		beq	44f			@ configure OMAP4UART4
+		cmp	\rp, #OMAP4UART4	@ only on 44xx/54xx
+		beq	44f			@ configure OMAP4/5UART4
 		cmp	\rp, #TI81XXUART1	@ ti81Xx UART offsets different
 		beq	81f			@ configure UART1
 		cmp	\rp, #TI81XXUART2	@ ti81Xx UART offsets different

arch/arm/mach-omap2/include/mach/omap-wakeupgen.h

@@ -11,15 +11,20 @@
 #ifndef OMAP_ARCH_WAKEUPGEN_H
 #define OMAP_ARCH_WAKEUPGEN_H
 
+/* OMAP4 and OMAP5 has same base address */
+#define OMAP_WKUPGEN_BASE			0x48281000
+
 #define OMAP_WKG_CONTROL_0			0x00
 #define OMAP_WKG_ENB_A_0			0x10
 #define OMAP_WKG_ENB_B_0			0x14
 #define OMAP_WKG_ENB_C_0			0x18
 #define OMAP_WKG_ENB_D_0			0x1c
+#define OMAP_WKG_ENB_E_0			0x20
 #define OMAP_WKG_ENB_A_1			0x410
 #define OMAP_WKG_ENB_B_1			0x414
 #define OMAP_WKG_ENB_C_1			0x418
 #define OMAP_WKG_ENB_D_1			0x41c
+#define OMAP_WKG_ENB_E_1			0x420
 #define OMAP_AUX_CORE_BOOT_0			0x800
 #define OMAP_AUX_CORE_BOOT_1			0x804
 #define OMAP_PTMSYNCREQ_MASK			0xc00
@@ -28,4 +33,6 @@
 #define OMAP_TIMESTAMPCYCLEHI			0xc0c
 
 extern int __init omap_wakeupgen_init(void);
+extern void __iomem *omap_get_wakeupgen_base(void);
+extern int omap_secure_apis_support(void);
 #endif

arch/arm/mach-omap2/io.c

@@ -233,6 +233,35 @@ static struct map_desc omap44xx_io_desc[] __initdata = {
 };
 #endif
 
+#ifdef	CONFIG_SOC_OMAP5
+static struct map_desc omap54xx_io_desc[] __initdata = {
+	{
+		.virtual	= L3_54XX_VIRT,
+		.pfn		= __phys_to_pfn(L3_54XX_PHYS),
+		.length		= L3_54XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_54XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_54XX_PHYS),
+		.length		= L4_54XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_WK_54XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_WK_54XX_PHYS),
+		.length		= L4_WK_54XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_PER_54XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_PER_54XX_PHYS),
+		.length		= L4_PER_54XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+#endif
+
 #ifdef CONFIG_SOC_OMAP2420
 void __init omap242x_map_common_io(void)
 {
@@ -278,6 +307,12 @@ void __init omap44xx_map_common_io(void)
 }
 #endif
 
+#ifdef CONFIG_SOC_OMAP5
+void __init omap5_map_common_io(void)
+{
+	iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc));
+}
+#endif
 /*
  * omap2_init_reprogram_sdrc - reprogram SDRC timing parameters
  *
@@ -513,6 +548,15 @@ void __init omap4430_init_late(void)
 }
 #endif
 
+#ifdef CONFIG_SOC_OMAP5
+void __init omap5_init_early(void)
+{
+	omap2_set_globals_5xxx();
+	omap5xxx_check_revision();
+	omap_common_init_early();
+}
+#endif
+
 void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 				      struct omap_sdrc_params *sdrc_cs1)
 {

arch/arm/mach-omap2/iomap.h

 /*
  * IO mappings for OMAP2+
  *
+ * IO definitions for TI OMAP processors and boards
+ *
+ * Copied from arch/arm/mach-sa1100/include/mach/io.h
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Copyright (C) 2009-2012 Texas Instruments
+ * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 of the License, or (at your
@@ -166,4 +174,23 @@
 						/* 0x49000000 --> 0xfb000000 */
 #define L4_ABE_44XX_VIRT	(L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_ABE_44XX_SIZE	SZ_1M
+/*
+ * ----------------------------------------------------------------------------
+ * Omap5 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+#define L3_54XX_PHYS		L3_54XX_BASE	/* 0x44000000 --> 0xf8000000 */
+#define L3_54XX_VIRT		(L3_54XX_PHYS + OMAP4_L3_IO_OFFSET)
+#define L3_54XX_SIZE		SZ_1M
+
+#define L4_54XX_PHYS		L4_54XX_BASE	/* 0x4a000000 --> 0xfc000000 */
+#define L4_54XX_VIRT		(L4_54XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_54XX_SIZE		SZ_4M
+
+#define L4_WK_54XX_PHYS		L4_WK_54XX_BASE	/* 0x4ae00000 --> 0xfce00000 */
+#define L4_WK_54XX_VIRT		(L4_WK_54XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_WK_54XX_SIZE		SZ_2M
 
+#define L4_PER_54XX_PHYS	L4_PER_54XX_BASE /* 0x48000000 --> 0xfa000000 */
+#define L4_PER_54XX_VIRT	(L4_PER_54XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_PER_54XX_SIZE	SZ_4M

arch/arm/mach-omap2/irq.c

@@ -21,6 +21,7 @@
 #include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include <mach/hardware.h>
 
@@ -258,7 +259,7 @@ asmlinkage void __exception_irq_entry omap2_intc_handle_irq(struct pt_regs *regs
 	omap_intc_handle_irq(base_addr, regs);
 }
 
-int __init omap_intc_of_init(struct device_node *node,
+int __init intc_of_init(struct device_node *node,
 			     struct device_node *parent)
 {
 	struct resource res;
@@ -280,6 +281,16 @@ int __init omap_intc_of_init(struct device_node *node,
 	return 0;
 }
 
+static struct of_device_id irq_match[] __initdata = {
+	{ .compatible = "ti,omap2-intc", .data = intc_of_init, },
+	{ }
+};
+
+void __init omap_intc_of_init(void)
+{
+	of_irq_init(irq_match);
+}
+
 #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX)
 static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)];
 

arch/arm/mach-omap2/omap-headsmp.S

@@ -19,6 +19,27 @@
 #include <linux/init.h>
 
 	__CPUINIT
+
+/* Physical address needed since MMU not enabled yet on secondary core */
+#define AUX_CORE_BOOT0_PA			0x48281800
+
+/*
+ * OMAP5 specific entry point for secondary CPU to jump from ROM
+ * code.  This routine also provides a holding flag into which
+ * secondary core is held until we're ready for it to initialise.
+ * The primary core will update this flag using a hardware
++ * register AuxCoreBoot0.
+ */
+ENTRY(omap5_secondary_startup)
+wait:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
+	ldr	r0, [r2]
+	mov	r0, r0, lsr #5
+	mrc	p15, 0, r4, c0, c0, 5
+	and	r4, r4, #0x0f
+	cmp	r0, r4
+	bne	wait
+	b	secondary_startup
+END(omap5_secondary_startup)
 /*
  * OMAP4 specific entry point for secondary CPU to jump from ROM
  * code.  This routine also provides a holding flag into which

arch/arm/mach-omap2/omap-hotplug.c

@@ -17,8 +17,10 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/smp.h>
+#include <linux/io.h>
 
 #include <asm/cacheflush.h>
+#include <mach/omap-wakeupgen.h>
 
 #include "common.h"
 
@@ -35,7 +37,8 @@ int platform_cpu_kill(unsigned int cpu)
  */
 void __ref platform_cpu_die(unsigned int cpu)
 {
-	unsigned int this_cpu;
+	unsigned int boot_cpu = 0;
+	void __iomem *base = omap_get_wakeupgen_base();
 
 	flush_cache_all();
 	dsb();
@@ -43,16 +46,27 @@ void __ref platform_cpu_die(unsigned int cpu)
 	/*
 	 * we're ready for shutdown now, so do it
 	 */
+	if (omap_secure_apis_support()) {
 		if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0)
 			pr_err("Secure clear status failed\n");
+	} else {
+		__raw_writel(0, base + OMAP_AUX_CORE_BOOT_0);
+	}
+
 
 	for (;;) {
 		/*
 		 * Enter into low power state
 		 */
 		omap4_hotplug_cpu(cpu, PWRDM_POWER_OFF);
-		this_cpu = smp_processor_id();
-		if (omap_read_auxcoreboot0() == this_cpu) {
+
+		if (omap_secure_apis_support())
+			boot_cpu = omap_read_auxcoreboot0();
+		else
+			boot_cpu =
+				__raw_readl(base + OMAP_AUX_CORE_BOOT_0) >> 5;
+
+		if (boot_cpu == smp_processor_id()) {
 			/*
 			 * OK, proper wakeup, we're done
 			 */

arch/arm/mach-omap2/omap-smp.c

@@ -26,11 +26,19 @@
 
 #include <mach/hardware.h>
 #include <mach/omap-secure.h>
+#include <mach/omap-wakeupgen.h>
+#include <asm/cputype.h>
 
 #include "iomap.h"
 #include "common.h"
 #include "clockdomain.h"
 
+#define CPU_MASK		0xff0ffff0
+#define CPU_CORTEX_A9		0x410FC090
+#define CPU_CORTEX_A15		0x410FC0F0
+
+#define OMAP5_CORE_COUNT	0x2
+
 /* SCU base address */
 static void __iomem *scu_base;
 
@@ -73,6 +81,8 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	static struct clockdomain *cpu1_clkdm;
 	static bool booted;
+	void __iomem *base = omap_get_wakeupgen_base();
+
 	/*
 	 * Set synchronisation state between this boot processor
 	 * and the secondary one
@@ -85,7 +95,11 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * the AuxCoreBoot1 register is updated with cpu state
 	 * A barrier is added to ensure that write buffer is drained
 	 */
+	if (omap_secure_apis_support())
 		omap_modify_auxcoreboot0(0x200, 0xfffffdff);
+	else
+		__raw_writel(0x20, base + OMAP_AUX_CORE_BOOT_0);
+
 	flush_cache_all();
 	smp_wmb();
 
@@ -124,13 +138,19 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init wakeup_secondary(void)
 {
+	void __iomem *base = omap_get_wakeupgen_base();
 	/*
 	 * Write the address of secondary startup routine into the
 	 * AuxCoreBoot1 where ROM code will jump and start executing
 	 * on secondary core once out of WFE
 	 * A barrier is added to ensure that write buffer is drained
 	 */
+	if (omap_secure_apis_support())
 		omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup));
+	else
+		__raw_writel(virt_to_phys(omap5_secondary_startup),
+						base + OMAP_AUX_CORE_BOOT_1);
+
 	smp_wmb();
 
 	/*
@@ -147,16 +167,21 @@ static void __init wakeup_secondary(void)
  */
 void __init smp_init_cpus(void)
 {
-	unsigned int i, ncores;
+	unsigned int i = 0, ncores = 1, cpu_id;
 
+	/* Use ARM cpuid check here, as SoC detection will not work so early */
+	cpu_id = read_cpuid(CPUID_ID) & CPU_MASK;
+	if (cpu_id == CPU_CORTEX_A9) {
 		/*
 		 * Currently we can't call ioremap here because
 		 * SoC detection won't work until after init_early.
 		 */
 		scu_base =  OMAP2_L4_IO_ADDRESS(OMAP44XX_SCU_BASE);
 		BUG_ON(!scu_base);
-
 		ncores = scu_get_core_count(scu_base);
+	} else if (cpu_id == CPU_CORTEX_A15) {
+		ncores = OMAP5_CORE_COUNT;
+	}
 
 	/* sanity check */
 	if (ncores > nr_cpu_ids) {
@@ -178,6 +203,7 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 	 * Initialise the SCU and wake up the secondary core using
 	 * wakeup_secondary().
 	 */
+	if (scu_base)
 		scu_enable(scu_base);
 	wakeup_secondary();
 }

arch/arm/mach-omap2/omap-wakeupgen.c

@@ -33,18 +33,23 @@
 #include "omap4-sar-layout.h"
 #include "common.h"
 
-#define NR_REG_BANKS		4
-#define MAX_IRQS		128
+#define MAX_NR_REG_BANKS	5
+#define MAX_IRQS		160
 #define WKG_MASK_ALL		0x00000000
 #define WKG_UNMASK_ALL		0xffffffff
 #define CPU_ENA_OFFSET		0x400
 #define CPU0_ID			0x0
 #define CPU1_ID			0x1
+#define OMAP4_NR_BANKS		4
+#define OMAP4_NR_IRQS		128
 
 static void __iomem *wakeupgen_base;
 static void __iomem *sar_base;
 static DEFINE_SPINLOCK(wakeupgen_lock);
 static unsigned int irq_target_cpu[NR_IRQS];
+static unsigned int irq_banks = MAX_NR_REG_BANKS;
+static unsigned int max_irqs = MAX_IRQS;
+static unsigned int omap_secure_apis;
 
 /*
  * Static helper functions.
@@ -146,13 +151,13 @@ static void wakeupgen_unmask(struct irq_data *d)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-static DEFINE_PER_CPU(u32 [NR_REG_BANKS], irqmasks);
+static DEFINE_PER_CPU(u32 [MAX_NR_REG_BANKS], irqmasks);
 
 static void _wakeupgen_save_masks(unsigned int cpu)
 {
 	u8 i;
 
-	for (i = 0; i < NR_REG_BANKS; i++)
+	for (i = 0; i < irq_banks; i++)
 		per_cpu(irqmasks, cpu)[i] = wakeupgen_readl(i, cpu);
 }
 
@@ -160,7 +165,7 @@ static void _wakeupgen_restore_masks(unsigned int cpu)
 {
 	u8 i;
 
-	for (i = 0; i < NR_REG_BANKS; i++)
+	for (i = 0; i < irq_banks; i++)
 		wakeupgen_writel(per_cpu(irqmasks, cpu)[i], i, cpu);
 }
 
@@ -168,7 +173,7 @@ static void _wakeupgen_set_all(unsigned int cpu, unsigned int reg)
 {
 	u8 i;
 
-	for (i = 0; i < NR_REG_BANKS; i++)
+	for (i = 0; i < irq_banks; i++)
 		wakeupgen_writel(reg, i, cpu);
 }
 
@@ -196,25 +201,14 @@ static void wakeupgen_irqmask_all(unsigned int cpu, unsigned int set)
 #endif
 
 #ifdef CONFIG_CPU_PM
-/*
- * Save WakeupGen interrupt context in SAR BANK3. Restore is done by
- * ROM code. WakeupGen IP is integrated along with GIC to manage the
- * interrupt wakeups from CPU low power states. It manages
- * masking/unmasking of Shared peripheral interrupts(SPI). So the
- * interrupt enable/disable control should be in sync and consistent
- * at WakeupGen and GIC so that interrupts are not lost.
- */
-static void irq_save_context(void)
+static inline void omap4_irq_save_context(void)
 {
 	u32 i, val;
 
 	if (omap_rev() == OMAP4430_REV_ES1_0)
 		return;
 
-	if (!sar_base)
-		sar_base = omap4_get_sar_ram_base();
-
-	for (i = 0; i < NR_REG_BANKS; i++) {
+	for (i = 0; i < irq_banks; i++) {
 		/* Save the CPUx interrupt mask for IRQ 0 to 127 */
 		val = wakeupgen_readl(i, 0);
 		sar_writel(val, WAKEUPGENENB_OFFSET_CPU0, i);
@@ -254,6 +248,53 @@ static void irq_save_context(void)
 	val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);
 	val |= SAR_BACKUP_STATUS_WAKEUPGEN;
 	__raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
+
+}
+
+static inline void omap5_irq_save_context(void)
+{
+	u32 i, val;
+
+	for (i = 0; i < irq_banks; i++) {
+		/* Save the CPUx interrupt mask for IRQ 0 to 159 */
+		val = wakeupgen_readl(i, 0);
+		sar_writel(val, OMAP5_WAKEUPGENENB_OFFSET_CPU0, i);
+		val = wakeupgen_readl(i, 1);
+		sar_writel(val, OMAP5_WAKEUPGENENB_OFFSET_CPU1, i);
+		sar_writel(0x0, OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0, i);
+		sar_writel(0x0, OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1, i);
+	}
+
+	/* Save AuxBoot* registers */
+	val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
+	__raw_writel(val, sar_base + OMAP5_AUXCOREBOOT0_OFFSET);
+	val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
+	__raw_writel(val, sar_base + OMAP5_AUXCOREBOOT1_OFFSET);
+
+	/* Set the Backup Bit Mask status */
+	val = __raw_readl(sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET);
+	val |= SAR_BACKUP_STATUS_WAKEUPGEN;
+	__raw_writel(val, sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET);
+
+}
+
+/*
+ * Save WakeupGen interrupt context in SAR BANK3. Restore is done by
+ * ROM code. WakeupGen IP is integrated along with GIC to manage the
+ * interrupt wakeups from CPU low power states. It manages
+ * masking/unmasking of Shared peripheral interrupts(SPI). So the
+ * interrupt enable/disable control should be in sync and consistent
+ * at WakeupGen and GIC so that interrupts are not lost.
+ */
+static void irq_save_context(void)
+{
+	if (!sar_base)
+		sar_base = omap4_get_sar_ram_base();
+
+	if (soc_is_omap54xx())
+		omap5_irq_save_context();
+	else
+		omap4_irq_save_context();
 }
 
 /*
@@ -262,9 +303,14 @@ static void irq_save_context(void)
 static void irq_sar_clear(void)
 {
 	u32 val;
-	val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);
+	u32 offset = SAR_BACKUP_STATUS_OFFSET;
+
+	if (soc_is_omap54xx())
+		offset = OMAP5_SAR_BACKUP_STATUS_OFFSET;
+
+	val = __raw_readl(sar_base + offset);
 	val &= ~SAR_BACKUP_STATUS_WAKEUPGEN;
-	__raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
+	__raw_writel(val, sar_base + offset);
 }
 
 /*
@@ -336,6 +382,8 @@ static struct notifier_block irq_notifier_block = {
 
 static void __init irq_pm_init(void)
 {
+	/* FIXME: Remove this when MPU OSWR support is added */
+	if (!soc_is_omap54xx())
 		cpu_pm_register_notifier(&irq_notifier_block);
 }
 #else
@@ -343,6 +391,16 @@ static void __init irq_pm_init(void)
 {}
 #endif
 
+void __iomem *omap_get_wakeupgen_base(void)
+{
+	return wakeupgen_base;
+}
+
+int omap_secure_apis_support(void)
+{
+	return omap_secure_apis;
+}
+
 /*
  * Initialise the wakeupgen module.
  */
@@ -358,12 +416,18 @@ int __init omap_wakeupgen_init(void)
 	}
 
 	/* Static mapping, never released */
-	wakeupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K);
+	wakeupgen_base = ioremap(OMAP_WKUPGEN_BASE, SZ_4K);
 	if (WARN_ON(!wakeupgen_base))
 		return -ENOMEM;
 
+	if (cpu_is_omap44xx()) {
+		irq_banks = OMAP4_NR_BANKS;
+		max_irqs = OMAP4_NR_IRQS;
+		omap_secure_apis = 1;
+	}
+
 	/* Clear all IRQ bitmasks at wakeupGen level */
-	for (i = 0; i < NR_REG_BANKS; i++) {
+	for (i = 0; i < irq_banks; i++) {
 		wakeupgen_writel(0, i, CPU0_ID);
 		wakeupgen_writel(0, i, CPU1_ID);
 	}
@@ -382,7 +446,7 @@ int __init omap_wakeupgen_init(void)
 	 */
 
 	/* Associate all the IRQs to boot CPU like GIC init does. */
-	for (i = 0; i < NR_IRQS; i++)
+	for (i = 0; i < max_irqs; i++)
 		irq_target_cpu[i] = boot_cpu;
 
 	irq_hotplug_init();

arch/arm/mach-omap2/omap4-common.c

@@ -21,6 +21,8 @@
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/map.h>
 #include <asm/memblock.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
 
 #include <plat/irqs.h>
 #include <plat/sram.h>
@@ -210,6 +212,18 @@ static int __init omap4_sar_ram_init(void)
 }
 early_initcall(omap4_sar_ram_init);
 
+static struct of_device_id irq_match[] __initdata = {
+	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+	{ .compatible = "arm,cortex-a15-gic", .data = gic_of_init, },
+	{ }
+};
+
+void __init omap_gic_of_init(void)
+{
+	omap_wakeupgen_init();
+	of_irq_init(irq_match);
+}
+
 #if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
 static int omap4_twl6030_hsmmc_late_init(struct device *dev)
 {

arch/arm/mach-omap2/omap4-sar-layout.h

@@ -12,7 +12,7 @@
 #define OMAP_ARCH_OMAP4_SAR_LAYOUT_H
 
 /*
- * SAR BANK offsets from base address OMAP44XX_SAR_RAM_BASE
+ * SAR BANK offsets from base address OMAP44XX/54XX_SAR_RAM_BASE
  */
 #define SAR_BANK1_OFFSET		0x0000
 #define SAR_BANK2_OFFSET		0x1000
@@ -47,4 +47,14 @@
 #define PTMSYNCREQ_EN_OFFSET			(SAR_BANK3_OFFSET + 0x6d0)
 #define SAR_BACKUP_STATUS_WAKEUPGEN		0x10
 
+/* WakeUpGen save restore offset from OMAP54XX_SAR_RAM_BASE */
+#define OMAP5_WAKEUPGENENB_OFFSET_CPU0		(SAR_BANK3_OFFSET + 0x8d4)
+#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0	(SAR_BANK3_OFFSET + 0x8e8)
+#define OMAP5_WAKEUPGENENB_OFFSET_CPU1		(SAR_BANK3_OFFSET + 0x8fc)
+#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1	(SAR_BANK3_OFFSET + 0x910)
+#define OMAP5_AUXCOREBOOT0_OFFSET		(SAR_BANK3_OFFSET + 0x924)
+#define OMAP5_AUXCOREBOOT1_OFFSET		(SAR_BANK3_OFFSET + 0x928)
+#define OMAP5_AMBA_IF_MODE_OFFSET		(SAR_BANK3_OFFSET + 0x92c)
+#define OMAP5_SAR_BACKUP_STATUS_OFFSET		(SAR_BANK3_OFFSET + 0x800)
+
 #endif

arch/arm/mach-omap2/omap_hwmod.c

@@ -3635,7 +3635,7 @@ void __init omap_hwmod_init(void)
 		soc_ops.assert_hardreset = _omap2_assert_hardreset;
 		soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
 		soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
-	} else if (cpu_is_omap44xx()) {
+	} else if (cpu_is_omap44xx() || soc_is_omap54xx()) {
 		soc_ops.enable_module = _omap4_enable_module;
 		soc_ops.disable_module = _omap4_disable_module;
 		soc_ops.wait_target_ready = _omap4_wait_target_ready;

arch/arm/mach-omap2/omap_l3_noc.h

@@ -51,7 +51,9 @@ static u32 l3_targ_inst_clk1[] = {
 	0x200, /* DMM2 */
 	0x300, /* ABE */
 	0x400, /* L4CFG */
-	0x600  /* CLK2 PWR DISC */
+	0x600,  /* CLK2 PWR DISC */
+	0x0,	/* Host CLK1 */
+	0x900	/* L4 Wakeup */
 };
 
 static u32 l3_targ_inst_clk2[] = {
@@ -72,11 +74,16 @@ static u32 l3_targ_inst_clk2[] = {
 	0xE00, /* missing in TRM corresponds to AES2*/
 	0xC00, /* L4 PER3 */
 	0xA00, /* L4 PER1*/
-	0xB00 /* L4 PER2*/
+	0xB00, /* L4 PER2*/
+	0x0, /* HOST CLK2 */
+	0x1800, /* CAL */
+	0x1700 /* LLI */
 };
 
 static u32 l3_targ_inst_clk3[] = {
-	0x0100	/* EMUSS */
+	0x0100	/* EMUSS */,
+	0x0300, /* DEBUGSS_CT_TBR */
+	0x0 /* HOST CLK3 */
 };
 
 static struct l3_masters_data {
@@ -110,13 +117,15 @@ static struct l3_masters_data {
 	{ 0xC8, "USBHOSTFS"}
 };
 
-static char *l3_targ_inst_name[L3_MODULES][18] = {
+static char *l3_targ_inst_name[L3_MODULES][21] = {
 	{
 		"DMM1",
 		"DMM2",
 		"ABE",
 		"L4CFG",
 		"CLK2 PWR DISC",
+		"HOST CLK1",
+		"L4 WAKEUP"
 	},
 	{
 		"CORTEX M3" ,
@@ -137,9 +146,14 @@ static char *l3_targ_inst_name[L3_MODULES][18] = {
 		"L4 PER3",
 		"L4 PER1",
 		"L4 PER2",
+		"HOST CLK2",
+		"CAL",
+		"LLI"
 	},
 	{
 		"EMUSS",
+		"DEBUG SOURCE",
+		"HOST CLK3"
 	},
 };
 

arch/arm/mach-omap2/prcm-common.h

@@ -416,7 +416,7 @@ extern void __iomem *cm_base;
 extern void __iomem *cm2_base;
 extern void __iomem *prcm_mpu_base;
 
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_OMAP5)
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
 extern void omap_prm_base_init(void);
 extern void omap_cm_base_init(void);
 #else

arch/arm/mach-omap2/prcm.c

@@ -160,7 +160,7 @@ void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
 	if (omap2_globals->prcm_mpu)
 		prcm_mpu_base = omap2_globals->prcm_mpu;
 
-	if (cpu_is_omap44xx()) {
+	if (cpu_is_omap44xx() || soc_is_omap54xx()) {
 		omap_prm_base_init();
 		omap_cm_base_init();
 	}

arch/arm/mach-omap2/timer.c

@@ -393,6 +393,11 @@ static void __init omap4_timer_init(void)
 OMAP_SYS_TIMER(4)
 #endif
 
+#ifdef CONFIG_SOC_OMAP5
+OMAP_SYS_TIMER_INIT(5, 1, OMAP4_CLKEV_SOURCE, 2, OMAP4_MPU_SOURCE)
+OMAP_SYS_TIMER(5)
+#endif
+
 /**
  * omap_timer_init - build and register timer device with an
  * associated timer hwmod

arch/arm/mach-socfpga/Makefile

+#
+# Makefile for the linux kernel.
+#
+
+obj-y					:= socfpga.o

arch/arm/mach-socfpga/Makefile.boot

+zreladdr-y	:= 0x00008000

arch/arm/mach-socfpga/include/mach/debug-macro.S

+/*
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+		.macro	addruart, rp, rv, tmp
+		mov	\rp, #DEBUG_LL_UART_OFFSET
+		orr	\rp, \rp, #0x00c00000
+		orr	\rv, \rp, #0xfe000000	@ virtual base
+		orr	\rp, \rp, #0xff000000	@ physical base
+		.endm
+

arch/arm/mach-socfpga/include/mach/timex.h

+/*
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define CLOCK_TICK_RATE		(50000000 / 16)

arch/arm/mach-socfpga/include/mach/uncompress.h

+#ifndef __MACH_UNCOMPRESS_H
+#define __MACH_UNCOMPRESS_H
+
+#define putc(c)
+#define flush()
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif

arch/arm/mach-socfpga/socfpga.c

+/*
+ *  Copyright (C) 2012 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/dw_apb_timer.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+
+extern void socfpga_init_clocks(void);
+
+const static struct of_device_id irq_match[] = {
+	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+	{}
+};
+
+static void __init gic_init_irq(void)
+{
+	of_irq_init(irq_match);
+}
+
+static void socfpga_cyclone5_restart(char mode, const char *cmd)
+{
+	/* TODO: */
+}
+
+static void __init socfpga_cyclone5_init(void)
+{
+	l2x0_of_init(0, ~0UL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	socfpga_init_clocks();
+}
+
+static const char *altera_dt_match[] = {
+	"altr,socfpga",
+	"altr,socfpga-cyclone5",
+	NULL
+};
+
+DT_MACHINE_START(SOCFPGA, "Altera SOCFPGA")
+	.init_irq	= gic_init_irq,
+	.handle_irq     = gic_handle_irq,
+	.timer		= &dw_apb_timer,
+	.init_machine	= socfpga_cyclone5_init,
+	.restart	= socfpga_cyclone5_restart,
+	.dt_compat	= altera_dt_match,
+MACHINE_END

arch/arm/plat-omap/Kconfig

@@ -29,7 +29,7 @@ config ARCH_OMAP2PLUS
 	select USE_OF
 	select PROC_DEVICETREE if PROC_FS
 	help
-	  "Systems based on OMAP2, OMAP3 or OMAP4"
+	  "Systems based on OMAP2, OMAP3, OMAP4 or OMAP5"
 
 endchoice
 
@@ -150,7 +150,7 @@ config OMAP_32K_TIMER
 	  This timer saves power compared to the OMAP_MPU_TIMER, and has
 	  support for no tick during idle. The 32KHz timer provides less
 	  intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
-	  currently only available for OMAP16XX, 24XX, 34XX and OMAP4.
+	  currently only available for OMAP16XX, 24XX, 34XX and OMAP4/5.
 
 config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
 	bool "OMAP3 HS/EMU save and restore for L2 AUX control register"

arch/arm/plat-omap/common.c

@@ -77,3 +77,12 @@ void __init omap_init_consistent_dma_size(void)
 	init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
 #endif
 }
+
+/*
+ * Stub function for OMAP2 so that common files
+ * continue to build when custom builds are used
+ */
+int __weak omap_secure_ram_reserve_memblock(void)
+{
+	return 0;
+}

arch/arm/plat-omap/counter_32k.c

@@ -29,7 +29,10 @@
 #include <plat/clock.h>
 
 /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
-#define OMAP2_32KSYNCNT_CR_OFF		0x10
+#define OMAP2_32KSYNCNT_REV_OFF		0x0
+#define OMAP2_32KSYNCNT_REV_SCHEME	(0x3 << 30)
+#define OMAP2_32KSYNCNT_CR_OFF_LOW	0x10
+#define OMAP2_32KSYNCNT_CR_OFF_HIGH	0x30
 
 /*
  * 32KHz clocksource ... always available, on pretty most chips except
@@ -84,9 +87,16 @@ int __init omap_init_clocksource_32k(void __iomem *vbase)
 	int ret;
 
 	/*
-	 * 32k sync Counter register offset is at 0x10
+	 * 32k sync Counter IP register offsets vary between the
+	 * highlander version and the legacy ones.
+	 * The 'SCHEME' bits(30-31) of the revision register is used
+	 * to identify the version.
 	 */
-	sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF;
+	if (__raw_readl(vbase + OMAP2_32KSYNCNT_REV_OFF) &
+						OMAP2_32KSYNCNT_REV_SCHEME)
+		sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_HIGH;
+	else
+		sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_LOW;
 
 	/*
 	 * 120000 rough estimate from the calculations in

arch/arm/plat-omap/include/plat/cpu.h

@@ -9,7 +9,7 @@
  *
  * Written by Tony Lindgren <tony.lindgren@nokia.com>
  *
- * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -70,6 +70,7 @@ unsigned int omap_rev(void);
  * cpu_is_omap443x():	True for OMAP4430
  * cpu_is_omap446x():	True for OMAP4460
  * cpu_is_omap447x():	True for OMAP4470
+ * soc_is_omap543x():	True for OMAP5430, OMAP5432
  */
 #define GET_OMAP_CLASS	(omap_rev() & 0xff)
 
@@ -122,6 +123,7 @@ IS_OMAP_CLASS(24xx, 0x24)
 IS_OMAP_CLASS(34xx, 0x34)
 IS_OMAP_CLASS(44xx, 0x44)
 IS_AM_CLASS(35xx, 0x35)
+IS_OMAP_CLASS(54xx, 0x54)
 IS_AM_CLASS(33xx, 0x33)
 
 IS_TI_CLASS(81xx, 0x81)
@@ -133,6 +135,7 @@ IS_OMAP_SUBCLASS(363x, 0x363)
 IS_OMAP_SUBCLASS(443x, 0x443)
 IS_OMAP_SUBCLASS(446x, 0x446)
 IS_OMAP_SUBCLASS(447x, 0x447)
+IS_OMAP_SUBCLASS(543x, 0x543)
 
 IS_TI_SUBCLASS(816x, 0x816)
 IS_TI_SUBCLASS(814x, 0x814)
@@ -156,6 +159,8 @@ IS_AM_SUBCLASS(335x, 0x335)
 #define cpu_is_omap443x()		0
 #define cpu_is_omap446x()		0
 #define cpu_is_omap447x()		0
+#define soc_is_omap54xx()		0
+#define soc_is_omap543x()		0
 
 #if defined(MULTI_OMAP1)
 # if defined(CONFIG_ARCH_OMAP730)
@@ -285,6 +290,7 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define cpu_is_omap2430()		0
 #define cpu_is_omap3430()		0
 #define cpu_is_omap3630()		0
+#define soc_is_omap5430()		0
 
 /*
  * Whether we have MULTI_OMAP1 or not, we still need to distinguish
@@ -355,11 +361,18 @@ IS_OMAP_TYPE(3430, 0x3430)
 # define cpu_is_omap447x()		is_omap447x()
 # endif
 
+# if defined(CONFIG_SOC_OMAP5)
+# undef soc_is_omap54xx
+# undef soc_is_omap543x
+# define soc_is_omap54xx()		is_omap54xx()
+# define soc_is_omap543x()		is_omap543x()
+#endif
+
 /* Macros to detect if we have OMAP1 or OMAP2 */
 #define cpu_class_is_omap1()	(cpu_is_omap7xx() || cpu_is_omap15xx() || \
 				cpu_is_omap16xx())
 #define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx() || \
-				cpu_is_omap44xx())
+				cpu_is_omap44xx() || soc_is_omap54xx())
 
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS		0x24200024
@@ -412,9 +425,14 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define OMAP447X_CLASS		0x44700044
 #define OMAP4470_REV_ES1_0	(OMAP447X_CLASS | (0x10 << 8))
 
+#define OMAP54XX_CLASS		0x54000054
+#define OMAP5430_REV_ES1_0	(OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
+#define OMAP5432_REV_ES1_0	(OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
+
 void omap2xxx_check_revision(void);
 void omap3xxx_check_revision(void);
 void omap4xxx_check_revision(void);
+void omap5xxx_check_revision(void);
 void omap3xxx_check_features(void);
 void ti81xx_check_features(void);
 void omap4xxx_check_features(void);

arch/arm/plat-omap/include/plat/hardware.h

@@ -288,5 +288,6 @@
 #include <plat/omap44xx.h>
 #include <plat/ti81xx.h>
 #include <plat/am33xx.h>
+#include <plat/omap54xx.h>
 
 #endif	/* __ASM_ARCH_OMAP_HARDWARE_H */

arch/arm/plat-omap/include/plat/multi.h

@@ -99,4 +99,13 @@
 # endif
 #endif
 
+#ifdef CONFIG_SOC_OMAP5
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap5
+# endif
+#endif
+
 #endif	/* __PLAT_OMAP_MULTI_H */

arch/arm/plat-omap/include/plat/omap-secure.h

@@ -3,12 +3,7 @@
 
 #include <linux/types.h>
 
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 extern int omap_secure_ram_reserve_memblock(void);
-#else
-static inline void omap_secure_ram_reserve_memblock(void)
-{ }
-#endif
 
 #ifdef CONFIG_OMAP4_ERRATA_I688
 extern int omap_barrier_reserve_memblock(void);

arch/arm/plat-omap/include/plat/omap54xx.h

+/*:
+ * Address mappings and base address for OMAP5 interconnects
+ * and peripherals.
+ *
+ * Copyright (C) 2012 Texas Instruments
+ *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *	Sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_SOC_OMAP54XX_H
+#define __ASM_SOC_OMAP54XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+#define L4_54XX_BASE			0x4a000000
+#define L4_WK_54XX_BASE			0x4ae00000
+#define L4_PER_54XX_BASE		0x48000000
+#define L3_54XX_BASE			0x44000000
+#define OMAP54XX_32KSYNCT_BASE		0x4ae04000
+#define OMAP54XX_CM_CORE_AON_BASE	0x4a004000
+#define OMAP54XX_CM_CORE_BASE		0x4a008000
+#define OMAP54XX_PRM_BASE		0x4ae06000
+#define OMAP54XX_PRCM_MPU_BASE		0x48243000
+#define OMAP54XX_SCM_BASE		0x4a002000
+#define OMAP54XX_CTRL_BASE		0x4a002800
+
+#endif /* __ASM_SOC_OMAP555554XX_H */

arch/arm/plat-omap/include/plat/serial.h

@@ -63,6 +63,14 @@
 /* AM33XX serial port */
 #define AM33XX_UART1_BASE	0x44E09000
 
+/* OMAP5 serial ports */
+#define OMAP5_UART1_BASE	OMAP2_UART1_BASE
+#define OMAP5_UART2_BASE	OMAP2_UART2_BASE
+#define OMAP5_UART3_BASE	OMAP4_UART3_BASE
+#define OMAP5_UART4_BASE	OMAP4_UART4_BASE
+#define OMAP5_UART5_BASE	0x48066000
+#define OMAP5_UART6_BASE	0x48068000
+
 /* External port on Zoom2/3 */
 #define ZOOM_UART_BASE		0x10000000
 #define ZOOM_UART_VIRT		0xfa400000
@@ -97,6 +105,8 @@
 #define TI81XXUART2		82
 #define TI81XXUART3		83
 #define AM33XXUART1		84
+#define OMAP5UART3		OMAP4UART3
+#define OMAP5UART4		OMAP4UART4
 #define ZOOM_UART		95		/* Only on zoom2/3 */
 
 /* This is only used by 8250.c for omap1510 */

arch/arm/plat-omap/include/plat/uncompress.h

@@ -95,6 +95,9 @@ static inline void flush(void)
 	_DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT,	\
 		OMAP4UART##p)
 
+#define DEBUG_LL_OMAP5(p, mach)						\
+	_DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		OMAP5UART##p)
 /* Zoom2/3 shift is different for UART1 and external port */
 #define DEBUG_LL_ZOOM(mach)						\
 	_DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
@@ -177,6 +180,9 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 		DEBUG_LL_OMAP4(3, omap_4430sdp);
 		DEBUG_LL_OMAP4(3, omap4_panda);
 
+		/* omap5 based boards using UART3 */
+		DEBUG_LL_OMAP5(3, omap5_sevm);
+
 		/* zoom2/3 external uart */
 		DEBUG_LL_ZOOM(omap_zoom2);
 		DEBUG_LL_ZOOM(omap_zoom3);

arch/arm/plat-omap/sram.c

@@ -6,8 +6,8 @@
  * Copyright (C) 2005 Nokia Corporation
  * Written by Tony Lindgren <tony@atomide.com>
  *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Copyright (C) 2009-2012 Texas Instruments
+ * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -44,6 +44,7 @@
 #else
 #define OMAP4_SRAM_PUB_PA	(OMAP4_SRAM_PA + 0x4000)
 #endif
+#define OMAP5_SRAM_PA		0x40300000
 
 #if defined(CONFIG_ARCH_OMAP2PLUS)
 #define SRAM_BOOTLOADER_SZ	0x00
@@ -118,6 +119,9 @@ static void __init omap_detect_sram(void)
 			} else if (cpu_is_omap44xx()) {
 				omap_sram_start = OMAP4_SRAM_PUB_PA;
 				omap_sram_size = 0xa000; /* 40K */
+			} else if (soc_is_omap54xx()) {
+				omap_sram_start = OMAP5_SRAM_PA;
+				omap_sram_size = SZ_128K; /* 128KB */
 			} else {
 				omap_sram_start = OMAP2_SRAM_PUB_PA;
 				omap_sram_size = 0x800; /* 2K */
@@ -132,6 +136,9 @@ static void __init omap_detect_sram(void)
 			} else if (cpu_is_omap44xx()) {
 				omap_sram_start = OMAP4_SRAM_PA;
 				omap_sram_size = 0xe000; /* 56K */
+			} else if (soc_is_omap54xx()) {
+				omap_sram_start = OMAP5_SRAM_PA;
+				omap_sram_size = SZ_128K; /* 128KB */
 			} else {
 				omap_sram_start = OMAP2_SRAM_PA;
 				if (cpu_is_omap242x())

drivers/clk/Makefile

@@ -5,4 +5,5 @@ obj-$(CONFIG_COMMON_CLK)	+= clk.o clk-fixed-rate.o clk-gate.o \
 # SoCs specific
 obj-$(CONFIG_ARCH_NOMADIK)	+= clk-nomadik.o
 obj-$(CONFIG_ARCH_MXS)		+= mxs/
+obj-$(CONFIG_ARCH_SOCFPGA)	+= socfpga/
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/

drivers/clk/socfpga/Makefile

+obj-y += clk.o

drivers/clk/socfpga/clk.c

+/*
+ *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+
+#define SOCFPGA_OSC1_CLK	10000000
+#define SOCFPGA_MPU_CLK		800000000
+#define SOCFPGA_MAIN_QSPI_CLK		432000000
+#define SOCFPGA_MAIN_NAND_SDMMC_CLK	250000000
+#define SOCFPGA_S2F_USR_CLK		125000000
+
+void __init socfpga_init_clocks(void)
+{
+	struct clk *clk;
+
+	clk = clk_register_fixed_rate(NULL, "osc1_clk", NULL, CLK_IS_ROOT, SOCFPGA_OSC1_CLK);
+	clk_register_clkdev(clk, "osc1_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "mpu_clk", NULL, CLK_IS_ROOT, SOCFPGA_MPU_CLK);
+	clk_register_clkdev(clk, "mpu_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "main_clk", NULL, CLK_IS_ROOT, SOCFPGA_MPU_CLK/2);
+	clk_register_clkdev(clk, "main_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "dbg_base_clk", NULL, CLK_IS_ROOT, SOCFPGA_MPU_CLK/2);
+	clk_register_clkdev(clk, "dbg_base_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "main_qspi_clk", NULL, CLK_IS_ROOT, SOCFPGA_MAIN_QSPI_CLK);
+	clk_register_clkdev(clk, "main_qspi_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "main_nand_sdmmc_clk", NULL, CLK_IS_ROOT, SOCFPGA_MAIN_NAND_SDMMC_CLK);
+	clk_register_clkdev(clk, "main_nand_sdmmc_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "s2f_usr_clk", NULL, CLK_IS_ROOT, SOCFPGA_S2F_USR_CLK);
+	clk_register_clkdev(clk, "s2f_usr_clk", NULL);
+}

drivers/clocksource/Kconfig

@@ -19,6 +19,9 @@ config DW_APB_TIMER
 config DW_APB_TIMER_OF
 	bool
 
+config ARMADA_370_XP_TIMER
+	bool
+
 config CLKSRC_DBX500_PRCMU
 	bool "Clocksource PRCMU Timer"
 	depends on UX500_SOC_DB8500

drivers/clocksource/Makefile

@@ -12,3 +12,4 @@ obj-$(CONFIG_CLKSRC_MMIO)	+= mmio.o
 obj-$(CONFIG_DW_APB_TIMER)	+= dw_apb_timer.o
 obj-$(CONFIG_DW_APB_TIMER_OF)	+= dw_apb_timer_of.o
 obj-$(CONFIG_CLKSRC_DBX500_PRCMU)	+= clksrc-dbx500-prcmu.o
+obj-$(CONFIG_ARMADA_370_XP_TIMER)	+= time-armada-370-xp.o

drivers/clocksource/time-armada-370-xp.c

+/*
+ * Marvell Armada 370/XP SoC timer handling.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Timer 0 is used as free-running clocksource, while timer 1 is
+ * used as clock_event_device.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <asm/sched_clock.h>
+
+/*
+ * Timer block registers.
+ */
+#define TIMER_CTRL_OFF		0x0000
+#define  TIMER0_EN		 0x0001
+#define  TIMER0_RELOAD_EN	 0x0002
+#define  TIMER0_25MHZ            0x0800
+#define  TIMER0_DIV(div)         ((div) << 19)
+#define  TIMER1_EN		 0x0004
+#define  TIMER1_RELOAD_EN	 0x0008
+#define  TIMER1_25MHZ            0x1000
+#define  TIMER1_DIV(div)         ((div) << 22)
+#define TIMER_EVENTS_STATUS	0x0004
+#define  TIMER0_CLR_MASK         (~0x1)
+#define  TIMER1_CLR_MASK         (~0x100)
+#define TIMER0_RELOAD_OFF	0x0010
+#define TIMER0_VAL_OFF		0x0014
+#define TIMER1_RELOAD_OFF	0x0018
+#define TIMER1_VAL_OFF		0x001c
+
+/* Global timers are connected to the coherency fabric clock, and the
+   below divider reduces their incrementing frequency. */
+#define TIMER_DIVIDER_SHIFT     5
+#define TIMER_DIVIDER           (1 << TIMER_DIVIDER_SHIFT)
+
+/*
+ * SoC-specific data.
+ */
+static void __iomem *timer_base;
+static int timer_irq;
+
+/*
+ * Number of timer ticks per jiffy.
+ */
+static u32 ticks_per_jiffy;
+
+static u32 notrace armada_370_xp_read_sched_clock(void)
+{
+	return ~readl(timer_base + TIMER0_VAL_OFF);
+}
+
+/*
+ * Clockevent handling.
+ */
+static int
+armada_370_xp_clkevt_next_event(unsigned long delta,
+				struct clock_event_device *dev)
+{
+	u32 u;
+
+	/*
+	 * Clear clockevent timer interrupt.
+	 */
+	writel(TIMER1_CLR_MASK, timer_base + TIMER_EVENTS_STATUS);
+
+	/*
+	 * Setup new clockevent timer value.
+	 */
+	writel(delta, timer_base + TIMER1_VAL_OFF);
+
+	/*
+	 * Enable the timer.
+	 */
+	u = readl(timer_base + TIMER_CTRL_OFF);
+	u = ((u & ~TIMER1_RELOAD_EN) | TIMER1_EN |
+	     TIMER1_DIV(TIMER_DIVIDER_SHIFT));
+	writel(u, timer_base + TIMER_CTRL_OFF);
+
+	return 0;
+}
+
+static void
+armada_370_xp_clkevt_mode(enum clock_event_mode mode,
+			  struct clock_event_device *dev)
+{
+	u32 u;
+
+	if (mode == CLOCK_EVT_MODE_PERIODIC) {
+		/*
+		 * Setup timer to fire at 1/HZ intervals.
+		 */
+		writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD_OFF);
+		writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL_OFF);
+
+		/*
+		 * Enable timer.
+		 */
+		u = readl(timer_base + TIMER_CTRL_OFF);
+
+		writel((u | TIMER1_EN | TIMER1_RELOAD_EN |
+			TIMER1_DIV(TIMER_DIVIDER_SHIFT)),
+		       timer_base + TIMER_CTRL_OFF);
+	} else {
+		/*
+		 * Disable timer.
+		 */
+		u = readl(timer_base + TIMER_CTRL_OFF);
+		writel(u & ~TIMER1_EN, timer_base + TIMER_CTRL_OFF);
+
+		/*
+		 * ACK pending timer interrupt.
+		 */
+		writel(TIMER1_CLR_MASK, timer_base + TIMER_EVENTS_STATUS);
+
+	}
+}
+
+static struct clock_event_device armada_370_xp_clkevt = {
+	.name		= "armada_370_xp_tick",
+	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
+	.shift		= 32,
+	.rating		= 300,
+	.set_next_event	= armada_370_xp_clkevt_next_event,
+	.set_mode	= armada_370_xp_clkevt_mode,
+};
+
+static irqreturn_t armada_370_xp_timer_interrupt(int irq, void *dev_id)
+{
+	/*
+	 * ACK timer interrupt and call event handler.
+	 */
+
+	writel(TIMER1_CLR_MASK, timer_base + TIMER_EVENTS_STATUS);
+	armada_370_xp_clkevt.event_handler(&armada_370_xp_clkevt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction armada_370_xp_timer_irq = {
+	.name		= "armada_370_xp_tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.handler	= armada_370_xp_timer_interrupt
+};
+
+void __init armada_370_xp_timer_init(void)
+{
+	u32 u;
+	struct device_node *np;
+	unsigned int timer_clk;
+	int ret;
+	np = of_find_compatible_node(NULL, NULL, "marvell,armada-370-xp-timer");
+	timer_base = of_iomap(np, 0);
+	WARN_ON(!timer_base);
+
+	if (of_find_property(np, "marvell,timer-25Mhz", NULL)) {
+		/* The fixed 25MHz timer is available so let's use it */
+		u = readl(timer_base + TIMER_CTRL_OFF);
+		writel(u | TIMER0_25MHZ | TIMER1_25MHZ,
+		       timer_base + TIMER_CTRL_OFF);
+		timer_clk = 25000000;
+	} else {
+		u32 clk = 0;
+		ret = of_property_read_u32(np, "clock-frequency", &clk);
+		WARN_ON(!clk || ret < 0);
+		u = readl(timer_base + TIMER_CTRL_OFF);
+		writel(u & ~(TIMER0_25MHZ | TIMER1_25MHZ),
+		       timer_base + TIMER_CTRL_OFF);
+		timer_clk = clk / TIMER_DIVIDER;
+	}
+
+	/* We use timer 0 as clocksource, and timer 1 for
+	   clockevents */
+	timer_irq = irq_of_parse_and_map(np, 1);
+
+	ticks_per_jiffy = (timer_clk + HZ / 2) / HZ;
+
+	/*
+	 * Set scale and timer for sched_clock.
+	 */
+	setup_sched_clock(armada_370_xp_read_sched_clock, 32, timer_clk);
+
+	/*
+	 * Setup free-running clocksource timer (interrupts
+	 * disabled).
+	 */
+	writel(0xffffffff, timer_base + TIMER0_VAL_OFF);
+	writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF);
+
+	u = readl(timer_base + TIMER_CTRL_OFF);
+
+	writel((u | TIMER0_EN | TIMER0_RELOAD_EN |
+		TIMER0_DIV(TIMER_DIVIDER_SHIFT)), timer_base + TIMER_CTRL_OFF);
+
+	clocksource_mmio_init(timer_base + TIMER0_VAL_OFF,
+			      "armada_370_xp_clocksource",
+			      timer_clk, 300, 32, clocksource_mmio_readl_down);
+
+	/*
+	 * Setup clockevent timer (interrupt-driven).
+	 */
+	setup_irq(timer_irq, &armada_370_xp_timer_irq);
+	armada_370_xp_clkevt.cpumask = cpumask_of(0);
+	clockevents_config_and_register(&armada_370_xp_clkevt,
+					timer_clk, 1, 0xfffffffe);
+}
+

include/linux/dw_apb_timer.h

@@ -53,4 +53,5 @@ void dw_apb_clocksource_start(struct dw_apb_clocksource *dw_cs);
 cycle_t dw_apb_clocksource_read(struct dw_apb_clocksource *dw_cs);
 void dw_apb_clocksource_unregister(struct dw_apb_clocksource *dw_cs);
 
+extern struct sys_timer dw_apb_timer;
 #endif /* __DW_APB_TIMER_H__ */

include/linux/time-armada-370-xp.h

+/*
+ * Marvell Armada 370/XP SoC timer handling.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ */
+#ifndef __TIME_ARMADA_370_XPPRCMU_H
+#define __TIME_ARMADA_370_XPPRCMU_H
+
+#include <linux/init.h>
+
+void __init armada_370_xp_timer_init(void);
+
+#endif