Commit f0799895 authored by Hante Meuleman's avatar Hante Meuleman Committed by John W. Linville

brcmfmac: remove obsolete i-scan and clean up related code.

e-scan has become the default scanning method. This patch removes
the i-scan related code and cleans up e-scan related code to be
always enabled.
Reviewed-by: default avatarArend Van Spriel <arend@broadcom.com>
Reviewed-by: default avatarPieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: default avatarHante Meuleman <meuleman@broadcom.com>
Signed-off-by: default avatarFranky Lin <frankyl@broadcom.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 3082b9be
......@@ -55,14 +55,6 @@ config BRCMFMAC_USB
IEEE802.11n embedded FullMAC WLAN driver. Say Y if you want to
use the driver for an USB wireless card.
config BRCMISCAN
bool "Broadcom I-Scan (OBSOLETE)"
depends on BRCMFMAC
---help---
This option enables the I-Scan method. By default fullmac uses the
new E-Scan method which uses less memory in firmware and gives no
limitation on the number of scan results.
config BRCMDBG
bool "Broadcom driver debug functions"
depends on BRCMSMAC || BRCMFMAC
......
......@@ -100,19 +100,6 @@
#define BRCMF_SCAN_PARAMS_COUNT_MASK 0x0000ffff
#define BRCMF_SCAN_PARAMS_NSSID_SHIFT 16
#define BRCMF_SCAN_ACTION_START 1
#define BRCMF_SCAN_ACTION_CONTINUE 2
#define WL_SCAN_ACTION_ABORT 3
#define BRCMF_ISCAN_REQ_VERSION 1
/* brcmf_iscan_results status values */
#define BRCMF_SCAN_RESULTS_SUCCESS 0
#define BRCMF_SCAN_RESULTS_PARTIAL 1
#define BRCMF_SCAN_RESULTS_PENDING 2
#define BRCMF_SCAN_RESULTS_ABORTED 3
#define BRCMF_SCAN_RESULTS_NO_MEM 4
/* Indicates this key is using soft encrypt */
#define WL_SOFT_KEY (1 << 0)
/* primary (ie tx) key */
......@@ -452,14 +439,6 @@ struct brcmf_scan_params_le {
__le16 channel_list[1]; /* list of chanspecs */
};
/* incremental scan struct */
struct brcmf_iscan_params_le {
__le32 version;
__le16 action;
__le16 scan_duration;
struct brcmf_scan_params_le params_le;
};
struct brcmf_scan_results {
u32 buflen;
u32 version;
......@@ -467,12 +446,6 @@ struct brcmf_scan_results {
struct brcmf_bss_info_le bss_info_le[];
};
struct brcmf_scan_results_le {
__le32 buflen;
__le32 version;
__le32 count;
};
struct brcmf_escan_params_le {
__le32 version;
__le16 action;
......@@ -508,23 +481,6 @@ struct brcmf_join_params {
struct brcmf_assoc_params_le params_le;
};
/* incremental scan results struct */
struct brcmf_iscan_results {
union {
u32 status;
__le32 status_le;
};
union {
struct brcmf_scan_results results;
struct brcmf_scan_results_le results_le;
};
};
/* size of brcmf_iscan_results not including variable length array */
#define BRCMF_ISCAN_RESULTS_FIXED_SIZE \
(sizeof(struct brcmf_scan_results) + \
offsetof(struct brcmf_iscan_results, results))
struct brcmf_wsec_key {
u32 index; /* key index */
u32 len; /* key length */
......
......@@ -27,11 +27,10 @@
#define BRCMF_HDRS_VAL 0x0040
#define BRCMF_BYTES_VAL 0x0080
#define BRCMF_INTR_VAL 0x0100
#define BRCMF_GLOM_VAL 0x0400
#define BRCMF_EVENT_VAL 0x0800
#define BRCMF_BTA_VAL 0x1000
#define BRCMF_ISCAN_VAL 0x2000
#define BRCMF_FIL_VAL 0x4000
#define BRCMF_GLOM_VAL 0x0200
#define BRCMF_EVENT_VAL 0x0400
#define BRCMF_BTA_VAL 0x0800
#define BRCMF_FIL_VAL 0x1000
#if defined(DEBUG)
......
......@@ -84,31 +84,12 @@ do { \
#define WL_CONN(fmt, args...)
#endif /* (defined DEBUG) */
#define WL_NUM_SCAN_MAX 1
#define WL_NUM_PMKIDS_MAX MAXPMKID /* will be used
* for 2.6.33 kernel
* or later
*/
#define WL_SCAN_BUF_MAX (1024 * 8)
#define WL_NUM_SCAN_MAX 10
#define WL_NUM_PMKIDS_MAX MAXPMKID
#define WL_TLV_INFO_MAX 1024
#define WL_BSS_INFO_MAX 2048
#define WL_ASSOC_INFO_MAX 512 /*
* needs to grab assoc info from dongle to
* report it to cfg80211 through "connect"
* event
*/
#define WL_DCMD_LEN_MAX 1024
#define WL_ASSOC_INFO_MAX 512 /* assoc related fil max buf */
#define WL_EXTRA_BUF_MAX 2048
#define WL_ISCAN_BUF_MAX 2048 /*
* the buf length can be BRCMF_DCMD_MAXLEN
* to reduce iteration
*/
#define WL_ISCAN_TIMER_INTERVAL_MS 3000
#define WL_SCAN_ERSULTS_LAST (BRCMF_SCAN_RESULTS_NO_MEM+1)
#define WL_AP_MAX 256 /* virtually unlimitted as long
* as kernel memory allows
*/
#define WL_ROAM_TRIGGER_LEVEL -75
#define WL_ROAM_DELTA 20
#define WL_BEACON_TIMEOUT 3
......@@ -145,12 +126,6 @@ enum wl_mode {
WL_MODE_AP
};
/* dongle iscan state */
enum wl_iscan_state {
WL_ISCAN_STATE_IDLE,
WL_ISCAN_STATE_SCANING
};
/* dongle configuration */
struct brcmf_cfg80211_conf {
u32 mode; /* adhoc , infrastructure or ap */
......@@ -270,26 +245,6 @@ struct brcmf_cfg80211_vif {
struct list_head list;
};
/* dongle iscan event loop */
struct brcmf_cfg80211_iscan_eloop {
s32 (*handler[WL_SCAN_ERSULTS_LAST])
(struct brcmf_cfg80211_info *cfg);
};
/* dongle iscan controller */
struct brcmf_cfg80211_iscan_ctrl {
struct net_device *ndev;
struct timer_list timer;
u32 timer_ms;
u32 timer_on;
s32 state;
struct work_struct work;
struct brcmf_cfg80211_iscan_eloop el;
void *data;
s8 dcmd_buf[BRCMF_DCMD_SMLEN];
s8 scan_buf[WL_ISCAN_BUF_MAX];
};
/* association inform */
struct brcmf_cfg80211_connect_info {
u8 *req_ie;
......@@ -415,19 +370,15 @@ struct brcmf_pno_scanresults_le {
* @evt_q_lock: for event queue synchronization.
* @usr_sync: mainly for dongle up/down synchronization.
* @bss_list: bss_list holding scanned ap information.
* @scan_results: results of the last scan.
* @scan_req_int: internal scan request object.
* @bss_info: bss information for cfg80211 layer.
* @ie: information element object for internal purpose.
* @iscan: iscan controller information.
* @conn_info: association info.
* @pmk_list: wpa2 pmk list.
* @event_work: event handler work struct.
* @scan_status: scan activity on the dongle.
* @pub: common driver information.
* @channel: current channel.
* @iscan_on: iscan on/off switch.
* @iscan_kickstart: indicate iscan already started.
* @active_scan: current scan mode.
* @sched_escan: e-scan for scheduled scan support running.
* @ibss_starter: indicates this sta is ibss starter.
......@@ -439,7 +390,6 @@ struct brcmf_pno_scanresults_le {
* @dcmd_buf: dcmd buffer.
* @extra_buf: mainly to grab assoc information.
* @debugfsdir: debugfs folder for this device.
* @escan_on: escan on/off switch.
* @escan_info: escan information.
* @escan_timeout: Timer for catch scan timeout.
* @escan_timeout_work: scan timeout worker.
......@@ -456,19 +406,15 @@ struct brcmf_cfg80211_info {
spinlock_t evt_q_lock;
struct mutex usr_sync;
struct brcmf_scan_results *bss_list;
struct brcmf_scan_results *scan_results;
struct brcmf_cfg80211_scan_req *scan_req_int;
struct brcmf_cfg80211_scan_req scan_req_int;
struct wl_cfg80211_bss_info *bss_info;
struct brcmf_cfg80211_ie ie;
struct brcmf_cfg80211_iscan_ctrl *iscan;
struct brcmf_cfg80211_connect_info conn_info;
struct brcmf_cfg80211_pmk_list *pmk_list;
struct work_struct event_work;
unsigned long scan_status;
struct brcmf_pub *pub;
u32 channel;
bool iscan_on;
bool iscan_kickstart;
bool active_scan;
bool sched_escan;
bool ibss_starter;
......@@ -480,7 +426,6 @@ struct brcmf_cfg80211_info {
u8 *dcmd_buf;
u8 *extra_buf;
struct dentry *debugfsdir;
bool escan_on;
struct escan_info escan_info;
struct timer_list escan_timeout;
struct work_struct escan_timeout_work;
......@@ -523,9 +468,6 @@ static inline struct brcmf_cfg80211_profile *ndev_to_prof(struct net_device *nd)
return &ifp->vif->profile;
}
#define iscan_to_cfg(i) ((struct brcmf_cfg80211_info *)(i->data))
#define cfg_to_iscan(w) (w->iscan)
static inline struct
brcmf_cfg80211_connect_info *cfg_to_conn(struct brcmf_cfg80211_info *cfg)
{
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment