Merge branch 'Replay-and-offload-host-VLAN-entries-in-DSA'
Vladimir Oltean says: ==================== Replay and offload host VLAN entries in DSA v2->v3: - make the bridge stop notifying switchdev for !BRENTRY VLANs - create precommit and commit wrappers around __vlan_add_flags(). - special-case the BRENTRY transition from false to true, instead of treating it as a change of flags and letting drivers figure out that it really isn't. - avoid setting *changed unless we know that functions will not error out later. - drop "old_flags" from struct switchdev_obj_port_vlan, nobody needs it now, in v2 only DSA needed it to filter out BRENTRY transitions, that is now solved cleaner. - no BRIDGE_VLAN_INFO_BRENTRY flag checks and manipulations in DSA whatsoever, use the "bool changed" bit as-is after changing what it means. - merge dsa_slave_host_vlan_{add,del}() with dsa_slave_foreign_vlan_{add,del}(), since now they do the same thing, because the host_vlan functions no longer need to mangle the vlan BRENTRY flags and bool changed. v1->v2: - prune switchdev VLAN additions with no actual change differently - no longer need to revert struct net_bridge_vlan changes on error from switchdev - no longer need to first delete a changed VLAN before readding it - pass 'bool changed' and 'u16 old_flags' through switchdev_obj_port_vlan so that DSA can do some additional post-processing with the BRIDGE_VLAN_INFO_BRENTRY flag - support VLANs on foreign interfaces - fix the same -EOPNOTSUPP error in mv88e6xxx, this time on removal, due to VLAN deletion getting replayed earlier than FDB deletion The motivation behind these patches is that Rafael reported the following error with mv88e6xxx when the first switch port joins a bridge: mv88e6085 0x0000000008b96000:00: port 0 failed to add a6:ef:77:c8:5f:3d vid 1 to fdb: -95 (-EOPNOTSUPP) The FDB entry that's added is the MAC address of the bridge, in VID 1 (the default_pvid), being replayed as part of br_add_if() -> ... -> nbp_switchdev_sync_objs(). -EOPNOTSUPP is the mv88e6xxx driver's way of saying that VID 1 doesn't exist in the VTU, so it can't program the ATU with a FID, something which it needs. It appears to be a race, but it isn't, since we only end up installing VID 1 in the VTU by coincidence. DSA's approximation of programming VLANs on the CPU port together with the user ports breaks down with host FDB entries on mv88e6xxx, since that strictly requires the VTU to contain the VID. But the user may freely add VLANs pointing just towards the bridge, and FDB entries in those VLANs, and DSA will not be aware of them, because it only listens for VLANs on user ports. To create a solution that scales properly to cross-chip setups and doesn't leak entries behind, some changes in the bridge driver are required. I believe that these are for the better overall, but I may be wrong. Namely, the same refcounting procedure that DSA has in place for host FDB and MDB entries can be replicated for VLANs, except that it's garbage in, garbage out: the VLAN addition and removal notifications from switchdev aren't balanced. So the first 2 patches attempt to deal with that. This patch set has been superficially tested on a board with 3 mv88e6xxx switches in a daisy chain and appears to produce the primary desired effect - the driver no longer returns -EOPNOTSUPP when the first port joins a bridge, and is successful in performing local termination under a VLAN-aware bridge. As an additional side effect, it silences the annoying "p%d: already a member of VLAN %d\n" warning messages that the mv88e6xxx driver produces when coupled with systemd-networkd, and a few VLANs are configured. Furthermore, it advances Florian's idea from a few years back, which never got merged: https://lore.kernel.org/lkml/20180624153339.13572-1-f.fainelli@gmail.com/ v2 has also been tested on the NXP LS1028A felix switch. Some testing: root@debian:~# bridge vlan add dev br0 vid 101 pvid self [ 100.709220] mv88e6085 d0032004.mdio-mii:10: mv88e6xxx_port_vlan_add: port 9 vlan 101 [ 100.873426] mv88e6085 d0032004.mdio-mii:10: mv88e6xxx_port_vlan_add: port 10 vlan 101 [ 100.892314] mv88e6085 d0032004.mdio-mii:11: mv88e6xxx_port_vlan_add: port 9 vlan 101 [ 101.053392] mv88e6085 d0032004.mdio-mii:11: mv88e6xxx_port_vlan_add: port 10 vlan 101 [ 101.076994] mv88e6085 d0032004.mdio-mii:12: mv88e6xxx_port_vlan_add: port 9 vlan 101 root@debian:~# bridge vlan add dev br0 vid 101 pvid self root@debian:~# bridge vlan add dev br0 vid 101 pvid self root@debian:~# bridge vlan port vlan-id eth0 1 PVID Egress Untagged lan9 1 PVID Egress Untagged lan10 1 PVID Egress Untagged lan11 1 PVID Egress Untagged lan12 1 PVID Egress Untagged lan13 1 PVID Egress Untagged lan14 1 PVID Egress Untagged lan15 1 PVID Egress Untagged lan16 1 PVID Egress Untagged lan17 1 PVID Egress Untagged lan18 1 PVID Egress Untagged lan19 1 PVID Egress Untagged lan20 1 PVID Egress Untagged lan21 1 PVID Egress Untagged lan22 1 PVID Egress Untagged lan23 1 PVID Egress Untagged lan24 1 PVID Egress Untagged sfp 1 PVID Egress Untagged lan1 1 PVID Egress Untagged lan2 1 PVID Egress Untagged lan3 1 PVID Egress Untagged lan4 1 PVID Egress Untagged lan5 1 PVID Egress Untagged lan6 1 PVID Egress Untagged lan7 1 PVID Egress Untagged lan8 1 PVID Egress Untagged br0 1 Egress Untagged 101 PVID root@debian:~# bridge vlan del dev br0 vid 101 pvid self [ 108.340487] mv88e6085 d0032004.mdio-mii:11: mv88e6xxx_port_vlan_del: port 9 vlan 101 [ 108.379167] mv88e6085 d0032004.mdio-mii:11: mv88e6xxx_port_vlan_del: port 10 vlan 101 [ 108.402319] mv88e6085 d0032004.mdio-mii:12: mv88e6xxx_port_vlan_del: port 9 vlan 101 [ 108.425866] mv88e6085 d0032004.mdio-mii:10: mv88e6xxx_port_vlan_del: port 9 vlan 101 [ 108.452280] mv88e6085 d0032004.mdio-mii:10: mv88e6xxx_port_vlan_del: port 10 vlan 101 root@debian:~# bridge vlan del dev br0 vid 101 pvid self root@debian:~# bridge vlan del dev br0 vid 101 pvid self root@debian:~# bridge vlan port vlan-id eth0 1 PVID Egress Untagged lan9 1 PVID Egress Untagged lan10 1 PVID Egress Untagged lan11 1 PVID Egress Untagged lan12 1 PVID Egress Untagged lan13 1 PVID Egress Untagged lan14 1 PVID Egress Untagged lan15 1 PVID Egress Untagged lan16 1 PVID Egress Untagged lan17 1 PVID Egress Untagged lan18 1 PVID Egress Untagged lan19 1 PVID Egress Untagged lan20 1 PVID Egress Untagged lan21 1 PVID Egress Untagged lan22 1 PVID Egress Untagged lan23 1 PVID Egress Untagged lan24 1 PVID Egress Untagged sfp 1 PVID Egress Untagged lan1 1 PVID Egress Untagged lan2 1 PVID Egress Untagged lan3 1 PVID Egress Untagged lan4 1 PVID Egress Untagged lan5 1 PVID Egress Untagged lan6 1 PVID Egress Untagged lan7 1 PVID Egress Untagged lan8 1 PVID Egress Untagged br0 1 Egress Untagged root@debian:~# bridge vlan del dev br0 vid 101 pvid self ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
Showing
Please register or sign in to comment