Commit f108a420 authored by Larry Finger's avatar Larry Finger Committed by Kalle Valo

rtlwifi: Replace RT_TRACE with rtl_dbg

The macro name RT_TRACE makes it seem that it is used for tracing, when
is actually used for debugging. Change the name to rtl_dbg. Any Sparse
errors exposed by this change were also fixed.
Signed-off-by: default avatarLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200723204244.24457-3-Larry.Finger@lwfinger.net
parent 78a7245d
This diff is collapsed.
......@@ -43,12 +43,12 @@ static void rtl_cam_program_entry(struct ieee80211_hw *hw, u32 entry_no,
rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM],
target_command);
RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_SEC, DBG_LOUD,
"WRITE %x: %x\n",
rtlpriv->cfg->maps[WCAMI], target_content);
RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_SEC, DBG_LOUD,
"The Key ID is %d\n", entry_no);
RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_SEC, DBG_LOUD,
"WRITE %x: %x\n",
rtlpriv->cfg->maps[RWCAM], target_command);
......@@ -64,9 +64,9 @@ static void rtl_cam_program_entry(struct ieee80211_hw *hw, u32 entry_no,
rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM],
target_command);
RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_SEC, DBG_LOUD,
"WRITE A4: %x\n", target_content);
RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_SEC, DBG_LOUD,
"WRITE A0: %x\n", target_command);
} else {
......@@ -83,14 +83,14 @@ static void rtl_cam_program_entry(struct ieee80211_hw *hw, u32 entry_no,
rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM],
target_command);
RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_SEC, DBG_LOUD,
"WRITE A4: %x\n", target_content);
RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_SEC, DBG_LOUD,
"WRITE A0: %x\n", target_command);
}
}
RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_SEC, DBG_LOUD,
"after set key, usconfig:%x\n", us_config);
}
......@@ -101,13 +101,13 @@ u8 rtl_cam_add_one_entry(struct ieee80211_hw *hw, u8 *mac_addr,
u32 us_config;
struct rtl_priv *rtlpriv = rtl_priv(hw);
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG,
"EntryNo:%x, ulKeyId=%x, ulEncAlg=%x, ulUseDK=%x MacAddr %pM\n",
ul_entry_idx, ul_key_id, ul_enc_alg,
ul_default_key, mac_addr);
if (ul_key_id == TOTAL_CAM_ENTRY) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING,
"ulKeyId exceed!\n");
return 0;
}
......@@ -120,7 +120,7 @@ u8 rtl_cam_add_one_entry(struct ieee80211_hw *hw, u8 *mac_addr,
rtl_cam_program_entry(hw, ul_entry_idx, mac_addr,
(u8 *)key_content, us_config);
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "end\n");
rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, "end\n");
return 1;
......@@ -133,7 +133,7 @@ int rtl_cam_delete_one_entry(struct ieee80211_hw *hw,
u32 ul_command;
struct rtl_priv *rtlpriv = rtl_priv(hw);
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "key_idx:%d\n", ul_key_id);
rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, "key_idx:%d\n", ul_key_id);
ul_command = ul_key_id * CAM_CONTENT_COUNT;
ul_command = ul_command | BIT(31) | BIT(16);
......@@ -141,10 +141,10 @@ int rtl_cam_delete_one_entry(struct ieee80211_hw *hw,
rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[WCAMI], 0);
rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM], ul_command);
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
"rtl_cam_delete_one_entry(): WRITE A4: %x\n", 0);
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
"rtl_cam_delete_one_entry(): WRITE A0: %x\n", ul_command);
rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG,
"%s: WRITE A4: %x\n", __func__, 0);
rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG,
"%s: WRITE A0: %x\n", __func__, ul_command);
return 0;
......@@ -195,10 +195,10 @@ void rtl_cam_mark_invalid(struct ieee80211_hw *hw, u8 uc_index)
rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[WCAMI], ul_content);
rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM], ul_command);
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
"rtl_cam_mark_invalid(): WRITE A4: %x\n", ul_content);
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
"rtl_cam_mark_invalid(): WRITE A0: %x\n", ul_command);
rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG,
"%s: WRITE A4: %x\n", __func__, ul_content);
rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG,
"%s: WRITE A0: %x\n", __func__, ul_command);
}
EXPORT_SYMBOL(rtl_cam_mark_invalid);
......@@ -245,12 +245,10 @@ void rtl_cam_empty_entry(struct ieee80211_hw *hw, u8 uc_index)
rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[WCAMI], ul_content);
rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM], ul_command);
RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
"rtl_cam_empty_entry(): WRITE A4: %x\n",
ul_content);
RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
"rtl_cam_empty_entry(): WRITE A0: %x\n",
ul_command);
rtl_dbg(rtlpriv, COMP_SEC, DBG_LOUD,
"%s: WRITE A4: %x\n", __func__, ul_content);
rtl_dbg(rtlpriv, COMP_SEC, DBG_LOUD,
"%s: WRITE A0: %x\n", __func__, ul_command);
}
}
......@@ -313,7 +311,7 @@ void rtl_cam_del_entry(struct ieee80211_hw *hw, u8 *sta_addr)
/* Remove from HW Security CAM */
eth_zero_addr(rtlpriv->sec.hwsec_cam_sta_addr[i]);
rtlpriv->sec.hwsec_cam_bitmap &= ~(BIT(0) << i);
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG,
"&&&&&&&&&del entry %d\n", i);
}
}
......
This diff is collapsed.
......@@ -404,7 +404,7 @@ static ssize_t rtl_debugfs_set_write_rfreg(struct file *filp,
&path, &addr, &bitmask, &data);
if (num != 4) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_DMESG,
rtl_dbg(rtlpriv, COMP_ERR, DBG_DMESG,
"Format is <path> <addr> <mask> <data>\n");
return count;
}
......
......@@ -120,7 +120,7 @@ void efuse_write_1byte(struct ieee80211_hw *hw, u16 address, u8 value)
const u32 efuse_len =
rtlpriv->cfg->maps[EFUSE_REAL_CONTENT_SIZE];
RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD, "Addr=%x Data =%x\n",
rtl_dbg(rtlpriv, COMP_EFUSE, DBG_LOUD, "Addr=%x Data =%x\n",
address, value);
if (address < efuse_len) {
......@@ -211,9 +211,9 @@ void read_efuse(struct ieee80211_hw *hw, u16 _offset, u16 _size_byte, u8 *pbuf)
u8 efuse_usage;
if ((_offset + _size_byte) > rtlpriv->cfg->maps[EFUSE_HWSET_MAX_SIZE]) {
RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD,
"read_efuse(): Invalid offset(%#x) with read bytes(%#x)!!\n",
_offset, _size_byte);
rtl_dbg(rtlpriv, COMP_EFUSE, DBG_LOUD,
"%s: Invalid offset(%#x) with read bytes(%#x)!!\n",
__func__, _offset, _size_byte);
return;
}
......@@ -376,9 +376,9 @@ bool efuse_shadow_update_chk(struct ieee80211_hw *hw)
(EFUSE_MAX_SIZE - rtlpriv->cfg->maps[EFUSE_OOB_PROTECT_BYTES_LEN]))
result = false;
RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD,
"efuse_shadow_update_chk(): totalbytes(%#x), hdr_num(%#x), words_need(%#x), efuse_used(%d)\n",
totalbytes, hdr_num, words_need, efuse_used);
rtl_dbg(rtlpriv, COMP_EFUSE, DBG_LOUD,
"%s: totalbytes(%#x), hdr_num(%#x), words_need(%#x), efuse_used(%d)\n",
__func__, totalbytes, hdr_num, words_need, efuse_used);
return result;
}
......@@ -416,7 +416,7 @@ bool efuse_shadow_update(struct ieee80211_hw *hw)
u8 word_en = 0x0F;
u8 first_pg = false;
RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD, "\n");
rtl_dbg(rtlpriv, COMP_EFUSE, DBG_LOUD, "\n");
if (!efuse_shadow_update_chk(hw)) {
efuse_read_all_map(hw, &rtlefuse->efuse_map[EFUSE_INIT_MAP][0]);
......@@ -424,7 +424,7 @@ bool efuse_shadow_update(struct ieee80211_hw *hw)
&rtlefuse->efuse_map[EFUSE_INIT_MAP][0],
rtlpriv->cfg->maps[EFUSE_HWSET_MAX_SIZE]);
RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_EFUSE, DBG_LOUD,
"efuse out of capacity!!\n");
return false;
}
......@@ -464,7 +464,7 @@ bool efuse_shadow_update(struct ieee80211_hw *hw)
if (!efuse_pg_packet_write(hw, (u8) offset, word_en,
tmpdata)) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING,
"PG section(%#x) fail!!\n", offset);
break;
}
......@@ -478,7 +478,7 @@ bool efuse_shadow_update(struct ieee80211_hw *hw)
&rtlefuse->efuse_map[EFUSE_INIT_MAP][0],
rtlpriv->cfg->maps[EFUSE_HWSET_MAX_SIZE]);
RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD, "\n");
rtl_dbg(rtlpriv, COMP_EFUSE, DBG_LOUD, "\n");
return true;
}
......@@ -616,7 +616,7 @@ static int efuse_one_byte_write(struct ieee80211_hw *hw, u16 addr, u8 data)
struct rtl_priv *rtlpriv = rtl_priv(hw);
u8 tmpidx = 0;
RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_EFUSE, DBG_LOUD,
"Addr = %x Data=%x\n", addr, data);
rtl_write_byte(rtlpriv,
......@@ -996,7 +996,7 @@ static int efuse_pg_packet_write(struct ieee80211_hw *hw,
if (efuse_addr >= (EFUSE_MAX_SIZE -
rtlpriv->cfg->maps[EFUSE_OOB_PROTECT_BYTES_LEN])) {
RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_EFUSE, DBG_LOUD,
"efuse_addr(%#x) Out of size!!\n", efuse_addr);
}
......@@ -1037,7 +1037,7 @@ static u8 enable_efuse_data_write(struct ieee80211_hw *hw,
u8 tmpdata[8];
memset(tmpdata, 0xff, PGPKT_DATA_SIZE);
RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_EFUSE, DBG_LOUD,
"word_en = %x efuse_addr=%x\n", word_en, efuse_addr);
if (!(word_en & BIT(0))) {
......@@ -1240,11 +1240,11 @@ int rtl_get_hwinfo(struct ieee80211_hw *hw, struct rtl_priv *rtlpriv,
eeprom_id = *((u16 *)&hwinfo[0]);
if (eeprom_id != params[0]) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING,
"EEPROM ID(%#x) is invalid!!\n", eeprom_id);
rtlefuse->autoload_failflag = true;
} else {
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n");
rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n");
rtlefuse->autoload_failflag = false;
}
......@@ -1255,29 +1255,29 @@ int rtl_get_hwinfo(struct ieee80211_hw *hw, struct rtl_priv *rtlpriv,
rtlefuse->eeprom_did = *(u16 *)&hwinfo[params[2]];
rtlefuse->eeprom_svid = *(u16 *)&hwinfo[params[3]];
rtlefuse->eeprom_smid = *(u16 *)&hwinfo[params[4]];
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD,
"EEPROMId = 0x%4x\n", eeprom_id);
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD,
"EEPROM VID = 0x%4x\n", rtlefuse->eeprom_vid);
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD,
"EEPROM DID = 0x%4x\n", rtlefuse->eeprom_did);
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD,
"EEPROM SVID = 0x%4x\n", rtlefuse->eeprom_svid);
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD,
"EEPROM SMID = 0x%4x\n", rtlefuse->eeprom_smid);
for (i = 0; i < 6; i += 2) {
usvalue = *(u16 *)&hwinfo[params[5] + i];
*((u16 *)(&rtlefuse->dev_addr[i])) = usvalue;
}
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "%pM\n", rtlefuse->dev_addr);
rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, "%pM\n", rtlefuse->dev_addr);
rtlefuse->eeprom_channelplan = *&hwinfo[params[6]];
rtlefuse->eeprom_version = *(u16 *)&hwinfo[params[7]];
rtlefuse->txpwr_fromeprom = true;
rtlefuse->eeprom_oemid = *&hwinfo[params[8]];
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD,
"EEPROM Customer ID: 0x%2x\n", rtlefuse->eeprom_oemid);
/* set channel plan to world wide 13 */
......
This diff is collapsed.
......@@ -19,7 +19,7 @@ bool rtl_ps_enable_nic(struct ieee80211_hw *hw)
rtlpriv->intf_ops->reset_trx_ring(hw);
if (is_hal_stop(rtlhal))
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING,
"Driver is already down!\n");
/*<2> Enable Adapter */
......@@ -80,7 +80,7 @@ static bool rtl_ps_set_rf_state(struct ieee80211_hw *hw,
if (ppsc->rfchange_inprogress) {
spin_unlock(&rtlpriv->locks.rf_ps_lock);
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING,
"RF Change in progress! Wait to set..state_toset(%d).\n",
state_toset);
......@@ -191,7 +191,7 @@ void rtl_ips_nic_off_wq_callback(void *data)
enum rf_pwrstate rtstate;
if (mac->opmode != NL80211_IFTYPE_STATION) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING,
"not station return\n");
return;
}
......@@ -228,7 +228,7 @@ void rtl_ips_nic_off_wq_callback(void *data)
!ppsc->swrf_processing &&
(mac->link_state == MAC80211_NOLINK) &&
!mac->act_scanning) {
RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
rtl_dbg(rtlpriv, COMP_RF, DBG_TRACE,
"IPSEnter(): Turn off RF\n");
ppsc->inactive_pwrstate = ERFOFF;
......@@ -307,7 +307,7 @@ static bool rtl_get_fwlps_doze(struct ieee80211_hw *hw)
ppsc->last_delaylps_stamp_jiffies);
if (ps_timediff < 2000) {
RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_POWER, DBG_LOUD,
"Delay enter Fw LPS for DHCP, ARP, or EAPOL exchanging state\n");
return false;
}
......@@ -353,7 +353,7 @@ void rtl_lps_set_psmode(struct ieee80211_hw *hw, u8 rt_psmode)
if ((ppsc->fwctrl_lps) && ppsc->report_linked) {
if (ppsc->dot11_psmode == EACTIVE) {
RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
rtl_dbg(rtlpriv, COMP_RF, DBG_DMESG,
"FW LPS leave ps_mode:%x\n",
FW_PS_ACTIVE_MODE);
enter_fwlps = false;
......@@ -368,7 +368,7 @@ void rtl_lps_set_psmode(struct ieee80211_hw *hw, u8 rt_psmode)
rtlpriv->btcoexist.btc_ops->btc_lps_notify(rtlpriv, rt_psmode);
} else {
if (rtl_get_fwlps_doze(hw)) {
RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
rtl_dbg(rtlpriv, COMP_RF, DBG_DMESG,
"FW LPS enter ps_mode:%x\n",
ppsc->fwctrl_psmode);
if (rtlpriv->cfg->ops->get_btc_status())
......@@ -420,7 +420,7 @@ static void rtl_lps_enter_core(struct ieee80211_hw *hw)
* bt_ccoexist may ask to enter lps.
* In normal case, this constraint move to rtl_lps_set_psmode().
*/
RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_POWER, DBG_LOUD,
"Enter 802.11 power save mode...\n");
rtl_lps_set_psmode(hw, EAUTOPS);
......@@ -449,7 +449,7 @@ static void rtl_lps_leave_core(struct ieee80211_hw *hw)
RT_CLEAR_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM);
}
RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_POWER, DBG_LOUD,
"Busy Traffic,Leave 802.11 power save..\n");
rtl_lps_set_psmode(hw, EACTIVE);
......@@ -534,7 +534,7 @@ void rtl_swlps_beacon(struct ieee80211_hw *hw, void *data, unsigned int len)
queue_delayed_work(rtlpriv->works.rtl_wq,
&rtlpriv->works.ps_work, MSECS(5));
} else {
RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG,
rtl_dbg(rtlpriv, COMP_POWER, DBG_DMESG,
"u_bufferd: %x, m_buffered: %x\n", u_buffed, m_buffed);
}
}
......@@ -630,7 +630,7 @@ void rtl_swlps_rf_sleep(struct ieee80211_hw *hw)
/* this print should always be dtim_conter = 0 &
* sleep = dtim_period, that meaons, we should
* awake before every dtim */
RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG,
rtl_dbg(rtlpriv, COMP_POWER, DBG_DMESG,
"dtim_counter:%x will sleep :%d beacon_intv\n",
rtlpriv->psc.dtim_counter, sleep_intv);
......@@ -744,7 +744,7 @@ static void rtl_p2p_noa_ie(struct ieee80211_hw *hw, void *data,
if (ie[0] == 12) {
find_p2p_ps_ie = true;
if ((noa_len - 2) % 13 != 0) {
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD,
"P2P notice of absence: invalid length.%d\n",
noa_len);
return;
......@@ -757,7 +757,7 @@ static void rtl_p2p_noa_ie(struct ieee80211_hw *hw, void *data,
noa_index = ie[3];
if (rtlpriv->psc.p2p_ps_info.p2p_ps_mode ==
P2P_PS_NONE || noa_index != p2pinfo->noa_index) {
RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_FW, DBG_LOUD,
"update NOA ie.\n");
p2pinfo->noa_index = noa_index;
p2pinfo->opp_ps = (ie[4] >> 7);
......@@ -829,7 +829,7 @@ static void rtl_p2p_action_ie(struct ieee80211_hw *hw, void *data,
if (ie == NULL)
return;
RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "action frame find P2P IE.\n");
rtl_dbg(rtlpriv, COMP_FW, DBG_LOUD, "action frame find P2P IE.\n");
/*to find noa ie*/
while (ie + 1 < end) {
noa_len = le16_to_cpu(*(__le16 *)&ie[1]);
......@@ -837,11 +837,11 @@ static void rtl_p2p_action_ie(struct ieee80211_hw *hw, void *data,
return;
if (ie[0] == 12) {
RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "find NOA IE.\n");
rtl_dbg(rtlpriv, COMP_FW, DBG_LOUD, "find NOA IE.\n");
RT_PRINT_DATA(rtlpriv, COMP_FW, DBG_LOUD, "noa ie ",
ie, noa_len);
if ((noa_len - 2) % 13 != 0) {
RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_FW, DBG_LOUD,
"P2P notice of absence: invalid length.%d\n",
noa_len);
return;
......@@ -901,7 +901,7 @@ void rtl_p2p_ps_cmd(struct ieee80211_hw *hw , u8 p2p_ps_state)
struct rtl_ps_ctl *rtlps = rtl_psc(rtl_priv(hw));
struct rtl_p2p_ps_info *p2pinfo = &(rtlpriv->psc.p2p_ps_info);
RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, " p2p state %x\n" , p2p_ps_state);
rtl_dbg(rtlpriv, COMP_FW, DBG_LOUD, " p2p state %x\n", p2p_ps_state);
switch (p2p_ps_state) {
case P2P_PS_DISABLE:
p2pinfo->p2p_ps_state = p2p_ps_state;
......@@ -953,10 +953,10 @@ void rtl_p2p_ps_cmd(struct ieee80211_hw *hw , u8 p2p_ps_state)
default:
break;
}
RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD,
rtl_dbg(rtlpriv, COMP_FW, DBG_LOUD,
"ctwindow %x oppps %x\n",
p2pinfo->ctwindow , p2pinfo->opp_ps);
RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD,
p2pinfo->ctwindow, p2pinfo->opp_ps);
rtl_dbg(rtlpriv, COMP_FW, DBG_LOUD,
"count %x duration %x index %x interval %x start time %x noa num %x\n",
p2pinfo->noa_count_type[0],
p2pinfo->noa_duration[0],
......@@ -964,7 +964,7 @@ void rtl_p2p_ps_cmd(struct ieee80211_hw *hw , u8 p2p_ps_state)
p2pinfo->noa_interval[0],
p2pinfo->noa_start_time[0],
p2pinfo->noa_num);
RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "end\n");
rtl_dbg(rtlpriv, COMP_FW, DBG_LOUD, "end\n");
}
void rtl_p2p_info(struct ieee80211_hw *hw, void *data, unsigned int len)
......
......@@ -393,12 +393,12 @@ int rtl_regd_init(struct ieee80211_hw *hw,
rtlpriv->regd.country_code =
channel_plan_to_country_code(rtlpriv->efuse.channel_plan);
RT_TRACE(rtlpriv, COMP_REGD, DBG_DMESG,
rtl_dbg(rtlpriv, COMP_REGD, DBG_DMESG,
"rtl: EEPROM regdomain: 0x%0x country code: %d\n",
rtlpriv->efuse.channel_plan, rtlpriv->regd.country_code);
if (rtlpriv->regd.country_code >= COUNTRY_CODE_MAX) {
RT_TRACE(rtlpriv, COMP_REGD, DBG_DMESG,
rtl_dbg(rtlpriv, COMP_REGD, DBG_DMESG,
"rtl: EEPROM indicates invalid country code, world wide 13 should be used\n");
rtlpriv->regd.country_code = COUNTRY_CODE_WORLD_WIDE_13;
......@@ -414,7 +414,7 @@ int rtl_regd_init(struct ieee80211_hw *hw,
rtlpriv->regd.alpha2[1] = '0';
}
RT_TRACE(rtlpriv, COMP_REGD, DBG_TRACE,
rtl_dbg(rtlpriv, COMP_REGD, DBG_TRACE,
"rtl: Country alpha2 being used: %c%c\n",
rtlpriv->regd.alpha2[0], rtlpriv->regd.alpha2[1]);
......@@ -428,7 +428,7 @@ void rtl_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)
struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
struct rtl_priv *rtlpriv = rtl_priv(hw);
RT_TRACE(rtlpriv, COMP_REGD, DBG_LOUD, "\n");
rtl_dbg(rtlpriv, COMP_REGD, DBG_LOUD, "\n");
_rtl_reg_notifier_apply(wiphy, request, &rtlpriv->regd);
}
......@@ -259,14 +259,14 @@ static int _rtl_usb_init_tx(struct ieee80211_hw *hw)
? USB_HIGH_SPEED_BULK_SIZE
: USB_FULL_SPEED_BULK_SIZE;
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "USB Max Bulk-out Size=%d\n",
rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, "USB Max Bulk-out Size=%d\n",
rtlusb->max_bulk_out_size);
for (i = 0; i < __RTL_TXQ_NUM; i++) {
u32 ep_num = rtlusb->ep_map.ep_mapping[i];
if (!ep_num) {
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG,
"Invalid endpoint map setting!\n");
return -EINVAL;
}
......@@ -336,7 +336,7 @@ static int _rtl_usb_init(struct ieee80211_hw *hw)
else if (usb_endpoint_dir_out(pep_desc))
rtlusb->out_ep_nums++;
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG,
"USB EP(0x%02x), MaxPacketSize=%d, Interval=%d\n",
pep_desc->bEndpointAddress, pep_desc->wMaxPacketSize,
pep_desc->bInterval);
......@@ -932,7 +932,7 @@ static void _rtl_usb_tx_preprocess(struct ieee80211_hw *hw,
memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc));
if (ieee80211_is_auth(fc)) {
RT_TRACE(rtlpriv, COMP_SEND, DBG_DMESG, "MAC80211_LINKING\n");
rtl_dbg(rtlpriv, COMP_SEND, DBG_DMESG, "MAC80211_LINKING\n");
}
if (rtlpriv->psc.sw_ps_enabled) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment