Commit f15a4eb1 authored by Vandita Kulkarni's avatar Vandita Kulkarni Committed by José Roberto de Souza

drm/i915/tgl: Add dkl phy registers

These are the registers needed to program Dekel phy. Some register
definitions will be reused from MG PHY definitions, so adding a
comment on those.

Bspec: 49295
Reviewed-by: default avatarLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: default avatarVandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: default avatarClinton A Taylor <clinton.a.taylor@intel.com>
Signed-off-by: default avatarJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920205810.211048-5-jose.souza@intel.com
parent 57bd1798
...@@ -10115,6 +10115,168 @@ enum skl_power_gate { ...@@ -10115,6 +10115,168 @@ enum skl_power_gate {
_TGL_DPLL1_CFGCR1, \ _TGL_DPLL1_CFGCR1, \
_TGL_TBTPLL_CFGCR1) _TGL_TBTPLL_CFGCR1)
#define _DKL_PHY1_BASE 0x168000
#define _DKL_PHY2_BASE 0x169000
#define _DKL_PHY3_BASE 0x16A000
#define _DKL_PHY4_BASE 0x16B000
#define _DKL_PHY5_BASE 0x16C000
#define _DKL_PHY6_BASE 0x16D000
/* DEKEL PHY MMIO Address = Phy base + (internal address & ~index_mask) */
#define _DKL_PLL_DIV0 0x200
#define DKL_PLL_DIV0_INTEG_COEFF(x) ((x) << 16)
#define DKL_PLL_DIV0_INTEG_COEFF_MASK (0x1F << 16)
#define DKL_PLL_DIV0_PROP_COEFF(x) ((x) << 12)
#define DKL_PLL_DIV0_PROP_COEFF_MASK (0xF << 12)
#define DKL_PLL_DIV0_FBPREDIV_SHIFT (8)
#define DKL_PLL_DIV0_FBPREDIV(x) ((x) << DKL_PLL_DIV0_FBPREDIV_SHIFT)
#define DKL_PLL_DIV0_FBPREDIV_MASK (0xF << DKL_PLL_DIV0_FBPREDIV_SHIFT)
#define DKL_PLL_DIV0_FBDIV_INT(x) ((x) << 0)
#define DKL_PLL_DIV0_FBDIV_INT_MASK (0xFF << 0)
#define DKL_PLL_DIV0(tc_port) _MMIO(_PORT(tc_port, _DKL_PHY1_BASE, \
_DKL_PHY2_BASE) + \
_DKL_PLL_DIV0)
#define _DKL_PLL_DIV1 0x204
#define DKL_PLL_DIV1_IREF_TRIM(x) ((x) << 16)
#define DKL_PLL_DIV1_IREF_TRIM_MASK (0x1F << 16)
#define DKL_PLL_DIV1_TDC_TARGET_CNT(x) ((x) << 0)
#define DKL_PLL_DIV1_TDC_TARGET_CNT_MASK (0xFF << 0)
#define DKL_PLL_DIV1(tc_port) _MMIO(_PORT(tc_port, _DKL_PHY1_BASE, \
_DKL_PHY2_BASE) + \
_DKL_PLL_DIV1)
#define _DKL_PLL_SSC 0x210
#define DKL_PLL_SSC_IREF_NDIV_RATIO(x) ((x) << 29)
#define DKL_PLL_SSC_IREF_NDIV_RATIO_MASK (0x7 << 29)
#define DKL_PLL_SSC_STEP_LEN(x) ((x) << 16)
#define DKL_PLL_SSC_STEP_LEN_MASK (0xFF << 16)
#define DKL_PLL_SSC_STEP_NUM(x) ((x) << 11)
#define DKL_PLL_SSC_STEP_NUM_MASK (0x7 << 11)
#define DKL_PLL_SSC_EN (1 << 9)
#define DKL_PLL_SSC(tc_port) _MMIO(_PORT(tc_port, _DKL_PHY1_BASE, \
_DKL_PHY2_BASE) + \
_DKL_PLL_SSC)
#define _DKL_PLL_BIAS 0x214
#define DKL_PLL_BIAS_FRAC_EN_H (1 << 30)
#define DKL_PLL_BIAS_FBDIV_SHIFT (8)
#define DKL_PLL_BIAS_FBDIV_FRAC(x) ((x) << DKL_PLL_BIAS_FBDIV_SHIFT)
#define DKL_PLL_BIAS_FBDIV_FRAC_MASK (0x3FFFFF << DKL_PLL_BIAS_FBDIV_SHIFT)
#define DKL_PLL_BIAS(tc_port) _MMIO(_PORT(tc_port, _DKL_PHY1_BASE, \
_DKL_PHY2_BASE) + \
_DKL_PLL_BIAS)
#define _DKL_PLL_TDC_COLDST_BIAS 0x218
#define DKL_PLL_TDC_SSC_STEP_SIZE(x) ((x) << 8)
#define DKL_PLL_TDC_SSC_STEP_SIZE_MASK (0xFF << 8)
#define DKL_PLL_TDC_FEED_FWD_GAIN(x) ((x) << 0)
#define DKL_PLL_TDC_FEED_FWD_GAIN_MASK (0xFF << 0)
#define DKL_PLL_TDC_COLDST_BIAS(tc_port) _MMIO(_PORT(tc_port, \
_DKL_PHY1_BASE, \
_DKL_PHY2_BASE) + \
_DKL_PLL_TDC_COLDST_BIAS)
#define _DKL_REFCLKIN_CTL 0x12C
/* Bits are the same as MG_REFCLKIN_CTL */
#define DKL_REFCLKIN_CTL(tc_port) _MMIO(_PORT(tc_port, \
_DKL_PHY1_BASE, \
_DKL_PHY2_BASE) + \
_DKL_REFCLKIN_CTL)
#define _DKL_CLKTOP2_HSCLKCTL 0xD4
/* Bits are the same as MG_CLKTOP2_HSCLKCTL */
#define DKL_CLKTOP2_HSCLKCTL(tc_port) _MMIO(_PORT(tc_port, \
_DKL_PHY1_BASE, \
_DKL_PHY2_BASE) + \
_DKL_CLKTOP2_HSCLKCTL)
#define _DKL_CLKTOP2_CORECLKCTL1 0xD8
/* Bits are the same as MG_CLKTOP2_CORECLKCTL1 */
#define DKL_CLKTOP2_CORECLKCTL1(tc_port) _MMIO(_PORT(tc_port, \
_DKL_PHY1_BASE, \
_DKL_PHY2_BASE) + \
_DKL_CLKTOP2_CORECLKCTL1)
#define _DKL_TX_DPCNTL0 0x2C0
#define DKL_TX_PRESHOOT_COEFF(x) ((x) << 13)
#define DKL_TX_PRESHOOT_COEFF_MASK (0x1f << 13)
#define DKL_TX_DE_EMPHASIS_COEFF(x) ((x) << 8)
#define DKL_TX_DE_EMPAHSIS_COEFF_MASK (0x1f << 8)
#define DKL_TX_VSWING_CONTROL(x) ((x) << 0)
#define DKL_TX_VSWING_CONTROL_MASK (0x7 << 0)
#define DKL_TX_DPCNTL0(tc_port) _MMIO(_PORT(tc_port, \
_DKL_PHY1_BASE, \
_DKL_PHY2_BASE) + \
_DKL_TX_DPCNTL0)
#define _DKL_TX_DPCNTL1 0x2C4
/* Bits are the same as DKL_TX_DPCNTRL0 */
#define DKL_TX_DPCNTL1(tc_port) _MMIO(_PORT(tc_port, \
_DKL_PHY1_BASE, \
_DKL_PHY2_BASE) + \
_DKL_TX_DPCNTL1)
#define _DKL_TX_DPCNTL2 0x2C8
#define DKL_TX_DP20BITMODE (1 << 2)
#define DKL_TX_DPCNTL2(tc_port) _MMIO(_PORT(tc_port, \
_DKL_PHY1_BASE, \
_DKL_PHY2_BASE) + \
_DKL_TX_DPCNTL2)
#define _DKL_TX_FW_CALIB 0x2F8
#define DKL_TX_CFG_DISABLE_WAIT_INIT (1 << 7)
#define DKL_TX_FW_CALIB(tc_port) _MMIO(_PORT(tc_port, \
_DKL_PHY1_BASE, \
_DKL_PHY2_BASE) + \
_DKL_TX_FW_CALIB)
#define _DKL_TX_DW17 0xDC4
#define DKL_TX_DW17(tc_port) _MMIO(_PORT(tc_port, \
_DKL_PHY1_BASE, \
_DKL_PHY2_BASE) + \
_DKL_TX_DW17)
#define _DKL_TX_DW18 0xDC8
#define DKL_TX_DW18(tc_port) _MMIO(_PORT(tc_port, \
_DKL_PHY1_BASE, \
_DKL_PHY2_BASE) + \
_DKL_TX_DW18)
#define _DKL_DP_MODE 0xA0
#define DKL_DP_MODE_CFG_GAONPWR_GATING (1 << 1)
#define DKL_DP_MODE_CFG_DIGPWR_GATING (1 << 2)
#define DKL_DP_MODE_CFG_CLNPWR_GATING (1 << 3)
#define DKL_DP_MODE_CFG_TRPWR_GATING (1 << 4)
#define DKL_DP_MODE_CFG_TR2PWR_GATING (1 << 5)
#define DKL_DP_MODE_CFG_GATING_CTRL_MASK (0x1f << 1)
#define DKL_DP_MODE_CFG_DP_X1_MODE (1 << 6)
#define DKL_DP_MODE_CFG_DP_X2_MODE (1 << 7)
#define DKL_DP_MODE(tc_port) _MMIO(_PORT(tc_port, \
_DKL_PHY1_BASE, \
_DKL_PHY2_BASE) + \
_DKL_DP_MODE)
#define _DKL_CMN_UC_DW27 0x36C
#define DKL_CMN_UC_DW27_UC_HEALTH (0x1 << 15)
#define DKL_CMN_UC_DW_27(tc_port) _MMIO(_PORT(tc_port, \
_DKL_PHY1_BASE, \
_DKL_PHY2_BASE) + \
_DKL_CMN_UC_DW27)
/*
* Each Dekel PHY is addressed through a 4KB aperture. Each PHY has more than
* 4KB of register space, so a separate index is programmed in HIP_INDEX_REG0
* or HIP_INDEX_REG1, based on the port number, to set the upper 2 address
* bits that point the 4KB window into the full PHY register space.
*/
#define _HIP_INDEX_REG0 0x1010A0
#define _HIP_INDEX_REG1 0x1010A4
#define HIP_INDEX_REG(tc_port) _MMIO((tc_port) < 4 ? _HIP_INDEX_REG0 \
: _HIP_INDEX_REG1)
#define _HIP_INDEX_SHIFT(tc_port) (8 * ((tc_port) % 4))
#define HIP_INDEX_VAL(tc_port, val) ((val) << _HIP_INDEX_SHIFT(tc_port))
/* BXT display engine PLL */ /* BXT display engine PLL */
#define BXT_DE_PLL_CTL _MMIO(0x6d000) #define BXT_DE_PLL_CTL _MMIO(0x6d000)
#define BXT_DE_PLL_RATIO(x) (x) /* {60,65,100} * 19.2MHz */ #define BXT_DE_PLL_RATIO(x) (x) /* {60,65,100} * 19.2MHz */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment