Commit f1d54c47 authored by Guenter Roeck's avatar Guenter Roeck Committed by David S. Miller

net: mdio-gpio: Add support for separate MDI and MDO gpio pins

This is for a system with fixed assignments of input and output pins
(various variants of Kontron COMe).
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 1d251481
......@@ -32,8 +32,8 @@
struct mdio_gpio_info {
struct mdiobb_ctrl ctrl;
int mdc, mdio;
int mdc_active_low, mdio_active_low;
int mdc, mdio, mdo;
int mdc_active_low, mdio_active_low, mdo_active_low;
};
static void *mdio_gpio_of_get_data(struct platform_device *pdev)
......@@ -60,6 +60,12 @@ static void *mdio_gpio_of_get_data(struct platform_device *pdev)
pdata->mdio = ret;
pdata->mdio_active_low = flags & OF_GPIO_ACTIVE_LOW;
ret = of_get_gpio_flags(np, 2, &flags);
if (ret > 0) {
pdata->mdo = ret;
pdata->mdo_active_low = flags & OF_GPIO_ACTIVE_LOW;
}
return pdata;
}
......@@ -68,6 +74,16 @@ static void mdio_dir(struct mdiobb_ctrl *ctrl, int dir)
struct mdio_gpio_info *bitbang =
container_of(ctrl, struct mdio_gpio_info, ctrl);
if (bitbang->mdo) {
/* Separate output pin. Always set its value to high
* when changing direction. If direction is input,
* assume the pin serves as pull-up. If direction is
* output, the default value is high.
*/
gpio_set_value(bitbang->mdo, 1 ^ bitbang->mdo_active_low);
return;
}
if (dir)
gpio_direction_output(bitbang->mdio,
1 ^ bitbang->mdio_active_low);
......@@ -88,6 +104,9 @@ static void mdio_set(struct mdiobb_ctrl *ctrl, int what)
struct mdio_gpio_info *bitbang =
container_of(ctrl, struct mdio_gpio_info, ctrl);
if (bitbang->mdo)
gpio_set_value(bitbang->mdo, what ^ bitbang->mdo_active_low);
else
gpio_set_value(bitbang->mdio, what ^ bitbang->mdio_active_low);
}
......@@ -125,6 +144,8 @@ static struct mii_bus *mdio_gpio_bus_init(struct device *dev,
bitbang->mdc_active_low = pdata->mdc_active_low;
bitbang->mdio = pdata->mdio;
bitbang->mdio_active_low = pdata->mdio_active_low;
bitbang->mdo = pdata->mdo;
bitbang->mdo_active_low = pdata->mdo_active_low;
new_bus = alloc_mdio_bitbang(&bitbang->ctrl);
if (!new_bus)
......@@ -151,6 +172,13 @@ static struct mii_bus *mdio_gpio_bus_init(struct device *dev,
if (devm_gpio_request(dev, bitbang->mdio, "mdio"))
goto out_free_bus;
if (bitbang->mdo) {
if (devm_gpio_request(dev, bitbang->mdo, "mdo"))
goto out_free_bus;
gpio_direction_output(bitbang->mdo, 1);
gpio_direction_input(bitbang->mdio);
}
gpio_direction_output(bitbang->mdc, 0);
dev_set_drvdata(dev, new_bus);
......
......@@ -17,9 +17,11 @@ struct mdio_gpio_platform_data {
/* GPIO numbers for bus pins */
unsigned int mdc;
unsigned int mdio;
unsigned int mdo;
bool mdc_active_low;
bool mdio_active_low;
bool mdo_active_low;
unsigned int phy_mask;
int irqs[PHY_MAX_ADDR];
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment