tun: Fix/rewrite packet filtering logic

Please see the following thread to get some context on this
	http://marc.info/?l=linux-netdev&m=121564433018903&w=2

Basically the issue is that current multi-cast filtering stuff in
the TUN/TAP driver is seriously broken.
Original patch went in without proper review and ACK. It was broken and
confusing to start with and subsequent patches broke it completely.
To give you an idea of what's broken here are some of the issues:

- Very confusing comments throughout the code that imply that the
character device is a network interface in its own right, and that packets
are passed between the two nics. Which is completely wrong.

- Wrong set of ioctls is used for setting up filters. They look like
shortcuts for manipulating state of the tun/tap network interface but
in reality manipulate the state of the TX filter.

- ioctls that were originally used for setting address of the the TX filter
got "fixed" and now set the address of the network interface itself. Which
made filter totaly useless.

- Filtering is done too late. Instead of filtering early on, to avoid
unnecessary wakeups, filtering is done in the read() call.

The list goes on and on :)

So the patch cleans all that up. It introduces simple and clean interface for
setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering
before enqueuing the packets.

TX filtering is useful in the scenarios where TAP is part of a bridge, in
which case it gets all broadcast, multicast and potentially other packets when
the bridge is learning. So for example Ethernet tunnelling app may want to
setup TX filters to avoid tunnelling multicast traffic. QEMU and other
hypervisors can push RX filtering that is currently done in the guest into the
host context therefore saving wakeups and unnecessary data transfer.
Signed-off-by: Max Krasnyansky <maxk@qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/tun.c

@@ -18,10 +18,6 @@
 /*
  *  Changes:
  *
- *  Brian Braunstein <linuxkernel@bristyle.com> 2007/03/23
- *    Fixed hw address handling.  Now net_device.dev_addr is kept consistent
- *    with tun.dev_addr when the address is set by this module.
- *
  *  Mike Kershaw <dragorn@kismetwireless.net> 2005/08/14
  *    Add TUNSETLINK ioctl to set the link encapsulation
  *
@@ -83,9 +79,16 @@ static int debug;
 #define DBG1( a... )
 #endif
 
+#define FLT_EXACT_COUNT 8
+struct tap_filter {
+	unsigned int    count;    /* Number of addrs. Zero means disabled */
+	u32             mask[2];  /* Mask of the hashed addrs */
+	unsigned char	addr[FLT_EXACT_COUNT][ETH_ALEN];
+};
+
 struct tun_struct {
 	struct list_head        list;
-	unsigned long 		flags;
+	unsigned int 		flags;
 	int			attached;
 	uid_t			owner;
 	gid_t			group;
@@ -94,19 +97,119 @@ struct tun_struct {
 	struct sk_buff_head	readq;
 
 	struct net_device	*dev;
-
 	struct fasync_struct	*fasync;
 
-	unsigned long if_flags;
-	u8 dev_addr[ETH_ALEN];
-	u32 chr_filter[2];
-	u32 net_filter[2];
+	struct tap_filter       txflt;
 
 #ifdef TUN_DEBUG
 	int debug;
 #endif
 };
 
+/* TAP filterting */
+static void addr_hash_set(u32 *mask, const u8 *addr)
+{
+	int n = ether_crc(ETH_ALEN, addr) >> 26;
+	mask[n >> 5] |= (1 << (n & 31));
+}
+
+static unsigned int addr_hash_test(const u32 *mask, const u8 *addr)
+{
+	int n = ether_crc(ETH_ALEN, addr) >> 26;
+	return mask[n >> 5] & (1 << (n & 31));
+}
+
+static int update_filter(struct tap_filter *filter, void __user *arg)
+{
+	struct { u8 u[ETH_ALEN]; } *addr;
+	struct tun_filter uf;
+	int err, alen, n, nexact;
+
+	if (copy_from_user(&uf, arg, sizeof(uf)))
+		return -EFAULT;
+
+	if (!uf.count) {
+		/* Disabled */
+		filter->count = 0;
+		return 0;
+	}
+
+	alen = ETH_ALEN * uf.count;
+	addr = kmalloc(alen, GFP_KERNEL);
+	if (!addr)
+		return -ENOMEM;
+
+	if (copy_from_user(addr, arg + sizeof(uf), alen)) {
+		err = -EFAULT;
+		goto done;
+	}
+
+	/* The filter is updated without holding any locks. Which is
+	 * perfectly safe. We disable it first and in the worst
+	 * case we'll accept a few undesired packets. */
+	filter->count = 0;
+	wmb();
+
+	/* Use first set of addresses as an exact filter */
+	for (n = 0; n < uf.count && n < FLT_EXACT_COUNT; n++)
+		memcpy(filter->addr[n], addr[n].u, ETH_ALEN);
+
+	nexact = n;
+
+	/* The rest is hashed */
+	memset(filter->mask, 0, sizeof(filter->mask));
+	for (; n < uf.count; n++)
+		addr_hash_set(filter->mask, addr[n].u);
+
+	/* For ALLMULTI just set the mask to all ones.
+	 * This overrides the mask populated above. */
+	if ((uf.flags & TUN_FLT_ALLMULTI))
+		memset(filter->mask, ~0, sizeof(filter->mask));
+
+	/* Now enable the filter */
+	wmb();
+	filter->count = nexact;
+
+	/* Return the number of exact filters */
+	err = nexact;
+
+done:
+	kfree(addr);
+	return err;
+}
+
+/* Returns: 0 - drop, !=0 - accept */
+static int run_filter(struct tap_filter *filter, const struct sk_buff *skb)
+{
+	/* Cannot use eth_hdr(skb) here because skb_mac_hdr() is incorrect
+	 * at this point. */
+	struct ethhdr *eh = (struct ethhdr *) skb->data;
+	int i;
+
+	/* Exact match */
+	for (i = 0; i < filter->count; i++)
+		if (!compare_ether_addr(eh->h_dest, filter->addr[i]))
+			return 1;
+
+	/* Inexact match (multicast only) */
+	if (is_multicast_ether_addr(eh->h_dest))
+		return addr_hash_test(filter->mask, eh->h_dest);
+
+	return 0;
+}
+
+/*
+ * Checks whether the packet is accepted or not.
+ * Returns: 0 - drop, !=0 - accept
+ */
+static int check_filter(struct tap_filter *filter, const struct sk_buff *skb)
+{
+	if (!filter->count)
+		return 1;
+
+	return run_filter(filter, skb);
+}
+
 /* Network device part of the driver */
 
 static unsigned int tun_net_id;
@@ -141,7 +244,12 @@ static int tun_net_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (!tun->attached)
 		goto drop;
 
-	/* Packet dropping */
+	/* Drop if the filter does not like it.
+	 * This is a noop if the filter is disabled.
+	 * Filter can be enabled only for the TAP devices. */
+	if (!check_filter(&tun->txflt, skb))
+		goto drop;
+
 	if (skb_queue_len(&tun->readq) >= dev->tx_queue_len) {
 		if (!(tun->flags & TUN_ONE_QUEUE)) {
 			/* Normal queueing mode. */
@@ -158,7 +266,7 @@ static int tun_net_xmit(struct sk_buff *skb, struct net_device *dev)
 		}
 	}
 
-	/* Queue packet */
+	/* Enqueue packet */
 	skb_queue_tail(&tun->readq, skb);
 	dev->trans_start = jiffies;
 
@@ -174,41 +282,14 @@ static int tun_net_xmit(struct sk_buff *skb, struct net_device *dev)
 	return 0;
 }
 
-/** Add the specified Ethernet address to this multicast filter. */
-static void
-add_multi(u32* filter, const u8* addr)
-{
-	int bit_nr = ether_crc(ETH_ALEN, addr) >> 26;
-	filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
-}
-
-/** Remove the specified Ethernet addres from this multicast filter. */
-static void
-del_multi(u32* filter, const u8* addr)
+static void tun_net_mclist(struct net_device *dev)
 {
-	int bit_nr = ether_crc(ETH_ALEN, addr) >> 26;
-	filter[bit_nr >> 5] &= ~(1 << (bit_nr & 31));
-}
-
-/** Update the list of multicast groups to which the network device belongs.
- * This list is used to filter packets being sent from the character device to
- * the network device. */
-static void
-tun_net_mclist(struct net_device *dev)
-{
-	struct tun_struct *tun = netdev_priv(dev);
-	const struct dev_mc_list *mclist;
-	int i;
-	DECLARE_MAC_BUF(mac);
-	DBG(KERN_DEBUG "%s: tun_net_mclist: mc_count %d\n",
-			dev->name, dev->mc_count);
-	memset(tun->chr_filter, 0, sizeof tun->chr_filter);
-	for (i = 0, mclist = dev->mc_list; i < dev->mc_count && mclist != NULL;
-			i++, mclist = mclist->next) {
-		add_multi(tun->net_filter, mclist->dmi_addr);
-		DBG(KERN_DEBUG "%s: tun_net_mclist: %s\n",
-		    dev->name, print_mac(mac, mclist->dmi_addr));
-	}
+	/*
+	 * This callback is supposed to deal with mc filter in
+	 * _rx_ path and has nothing to do with the _tx_ path.
+	 * In rx path we always accept everything userspace gives us.
+	 */
+	return;
 }
 
 #define MIN_MTU 68
@@ -244,13 +325,11 @@ static void tun_net_init(struct net_device *dev)
 
 	case TUN_TAP_DEV:
 		/* Ethernet TAP Device */
-		dev->set_multicast_list = tun_net_mclist;
-
 		ether_setup(dev);
 		dev->change_mtu         = tun_net_change_mtu;
+		dev->set_multicast_list = tun_net_mclist;
 
-		/* random address already created for us by tun_set_iff, use it */
-		memcpy(dev->dev_addr, tun->dev_addr, min(sizeof(tun->dev_addr), sizeof(dev->dev_addr)) );
+		random_ether_addr(dev->dev_addr);
 
 		dev->tx_queue_len = TUN_READQ_SIZE;  /* We prefer our own queue length */
 		break;
@@ -486,7 +565,6 @@ static ssize_t tun_chr_aio_read(struct kiocb *iocb, const struct iovec *iv,
 	DECLARE_WAITQUEUE(wait, current);
 	struct sk_buff *skb;
 	ssize_t len, ret = 0;
-	DECLARE_MAC_BUF(mac);
 
 	if (!tun)
 		return -EBADFD;
@@ -499,10 +577,6 @@ static ssize_t tun_chr_aio_read(struct kiocb *iocb, const struct iovec *iv,
 
 	add_wait_queue(&tun->read_wait, &wait);
 	while (len) {
-		const u8 ones[ ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
-		u8 addr[ ETH_ALEN];
-		int bit_nr;
-
 		current->state = TASK_INTERRUPTIBLE;
 
 		/* Read frames from the queue */
@@ -522,36 +596,9 @@ static ssize_t tun_chr_aio_read(struct kiocb *iocb, const struct iovec *iv,
 		}
 		netif_wake_queue(tun->dev);
 
-		/** Decide whether to accept this packet. This code is designed to
-		 * behave identically to an Ethernet interface. Accept the packet if
-		 * - we are promiscuous.
-		 * - the packet is addressed to us.
-		 * - the packet is broadcast.
-		 * - the packet is multicast and
-		 *   - we are multicast promiscous.
-		 *   - we belong to the multicast group.
-		 */
-		skb_copy_from_linear_data(skb, addr, min_t(size_t, sizeof addr,
-								   skb->len));
-		bit_nr = ether_crc(sizeof addr, addr) >> 26;
-		if ((tun->if_flags & IFF_PROMISC) ||
-				memcmp(addr, tun->dev_addr, sizeof addr) == 0 ||
-				memcmp(addr, ones, sizeof addr) == 0 ||
-				(((addr[0] == 1 && addr[1] == 0 && addr[2] == 0x5e) ||
-				  (addr[0] == 0x33 && addr[1] == 0x33)) &&
-				 ((tun->if_flags & IFF_ALLMULTI) ||
-				  (tun->chr_filter[bit_nr >> 5] & (1 << (bit_nr & 31)))))) {
-			DBG(KERN_DEBUG "%s: tun_chr_readv: accepted: %s\n",
-					tun->dev->name, print_mac(mac, addr));
 		ret = tun_put_user(tun, skb, (struct iovec *) iv, len);
 		kfree_skb(skb);
 		break;
-		} else {
-			DBG(KERN_DEBUG "%s: tun_chr_readv: rejected: %s\n",
-					tun->dev->name, print_mac(mac, addr));
-			kfree_skb(skb);
-			continue;
-		}
 	}
 
 	current->state = TASK_RUNNING;
@@ -647,12 +694,7 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr)
 		tun = netdev_priv(dev);
 		tun->dev = dev;
 		tun->flags = flags;
-		/* Be promiscuous by default to maintain previous behaviour. */
-		tun->if_flags = IFF_PROMISC;
-		/* Generate random Ethernet address. */
-		*(__be16 *)tun->dev_addr = htons(0x00FF);
-		get_random_bytes(tun->dev_addr + sizeof(u16), 4);
-		memset(tun->chr_filter, 0, sizeof tun->chr_filter);
+		tun->txflt.count = 0;
 
 		tun_net_init(dev);
 
@@ -751,6 +793,7 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file,
 	struct tun_struct *tun = file->private_data;
 	void __user* argp = (void __user*)arg;
 	struct ifreq ifr;
+	int ret;
 	DECLARE_MAC_BUF(mac);
 
 	if (cmd == TUNSETIFF || _IOC_TYPE(cmd) == 0x89)
@@ -826,9 +869,6 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file,
 		break;
 
 	case TUNSETLINK:
-	{
-		int ret;
-
 		/* Only allow setting the type when the interface is down */
 		rtnl_lock();
 		if (tun->dev->flags & IFF_UP) {
@@ -842,94 +882,44 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file,
 		}
 		rtnl_unlock();
 		return ret;
-	}
 
 #ifdef TUN_DEBUG
 	case TUNSETDEBUG:
 		tun->debug = arg;
 		break;
 #endif
-
 	case TUNSETOFFLOAD:
-	{
-		int ret;
 		rtnl_lock();
 		ret = set_offload(tun->dev, arg);
 		rtnl_unlock();
 		return ret;
-	}
-
-	case SIOCGIFFLAGS:
-		ifr.ifr_flags = tun->if_flags;
-		if (copy_to_user( argp, &ifr, sizeof ifr))
-			return -EFAULT;
-		return 0;
 
-	case SIOCSIFFLAGS:
-		/** Set the character device's interface flags. Currently only
-		 * IFF_PROMISC and IFF_ALLMULTI are used. */
-		tun->if_flags = ifr.ifr_flags;
-		DBG(KERN_INFO "%s: interface flags 0x%lx\n",
-				tun->dev->name, tun->if_flags);
-		return 0;
+	case TUNSETTXFILTER:
+		/* Can be set only for TAPs */
+		if ((tun->flags & TUN_TYPE_MASK) != TUN_TAP_DEV)
+			return -EINVAL;
+		rtnl_lock();
+		ret = update_filter(&tun->txflt, (void *) __user arg);
+		rtnl_unlock();
+		return ret;
 
 	case SIOCGIFHWADDR:
-		/* Note: the actual net device's address may be different */
-		memcpy(ifr.ifr_hwaddr.sa_data, tun->dev_addr,
-				min(sizeof ifr.ifr_hwaddr.sa_data, sizeof tun->dev_addr));
-		if (copy_to_user( argp, &ifr, sizeof ifr))
+		/* Get hw addres */
+		memcpy(ifr.ifr_hwaddr.sa_data, tun->dev->dev_addr, ETH_ALEN);
+		ifr.ifr_hwaddr.sa_family = tun->dev->type;
+		if (copy_to_user(argp, &ifr, sizeof ifr))
 			return -EFAULT;
 		return 0;
 
 	case SIOCSIFHWADDR:
-	{
-		/* try to set the actual net device's hw address */
-		int ret;
+		/* Set hw address */
+		DBG(KERN_DEBUG "%s: set hw address: %s\n",
+			tun->dev->name, print_mac(mac, ifr.ifr_hwaddr.sa_data));
 
 		rtnl_lock();
 		ret = dev_set_mac_address(tun->dev, &ifr.ifr_hwaddr);
 		rtnl_unlock();
-
-		if (ret == 0) {
-			/** Set the character device's hardware address. This is used when
-			 * filtering packets being sent from the network device to the character
-			 * device. */
-			memcpy(tun->dev_addr, ifr.ifr_hwaddr.sa_data,
-					min(sizeof ifr.ifr_hwaddr.sa_data, sizeof tun->dev_addr));
-			DBG(KERN_DEBUG "%s: set hardware address: %x:%x:%x:%x:%x:%x\n",
-					tun->dev->name,
-					tun->dev_addr[0], tun->dev_addr[1], tun->dev_addr[2],
-					tun->dev_addr[3], tun->dev_addr[4], tun->dev_addr[5]);
-		}
-
 		return ret;
-	}
-
-	case SIOCADDMULTI:
-		/** Add the specified group to the character device's multicast filter
-		 * list. */
-		rtnl_lock();
-		netif_tx_lock_bh(tun->dev);
-		add_multi(tun->chr_filter, ifr.ifr_hwaddr.sa_data);
-		netif_tx_unlock_bh(tun->dev);
-		rtnl_unlock();
-
-		DBG(KERN_DEBUG "%s: add multi: %s\n",
-		    tun->dev->name, print_mac(mac, ifr.ifr_hwaddr.sa_data));
-		return 0;
-
-	case SIOCDELMULTI:
-		/** Remove the specified group from the character device's multicast
-		 * filter list. */
-		rtnl_lock();
-		netif_tx_lock_bh(tun->dev);
-		del_multi(tun->chr_filter, ifr.ifr_hwaddr.sa_data);
-		netif_tx_unlock_bh(tun->dev);
-		rtnl_unlock();
-
-		DBG(KERN_DEBUG "%s: del multi: %s\n",
-		    tun->dev->name, print_mac(mac, ifr.ifr_hwaddr.sa_data));
-		return 0;
 
 	default:
 		return -EINVAL;

include/linux/if_tun.h

@@ -17,6 +17,7 @@
 #define __IF_TUN_H
 
 #include <linux/types.h>
+#include <linux/if_ether.h>
 
 /* Read queue size */
 #define TUN_READQ_SIZE	500
@@ -43,6 +44,7 @@
 #define TUNSETGROUP   _IOW('T', 206, int)
 #define TUNGETFEATURES _IOR('T', 207, unsigned int)
 #define TUNSETOFFLOAD  _IOW('T', 208, unsigned int)
+#define TUNSETTXFILTER _IOW('T', 209, unsigned int)
 
 /* TUNSETIFF ifr flags */
 #define IFF_TUN		0x0001
@@ -57,10 +59,26 @@
 #define TUN_F_TSO6	0x04	/* I can handle TSO for IPv6 packets */
 #define TUN_F_TSO_ECN	0x08	/* I can handle TSO with ECN bits. */
 
+/* Protocol info prepended to the packets (when IFF_NO_PI is not set) */
+#define TUN_PKT_STRIP	0x0001
 struct tun_pi {
-	unsigned short flags;
+	__u16  flags;
 	__be16 proto;
 };
-#define TUN_PKT_STRIP	0x0001
+
+/*
+ * Filter spec (used for SETXXFILTER ioctls)
+ * This stuff is applicable only to the TAP (Ethernet) devices.
+ * If the count is zero the filter is disabled and the driver accepts
+ * all packets (promisc mode).
+ * If the filter is enabled in order to accept broadcast packets
+ * broadcast addr must be explicitly included in the addr list.
+ */
+#define TUN_FLT_ALLMULTI 0x0001 /* Accept all multicast packets */
+struct tun_filter {
+	__u16  flags; /* TUN_FLT_ flags see above */
+	__u16  count; /* Number of addresses */
+	__u8   addr[0][ETH_ALEN];
+};
 
 #endif /* __IF_TUN_H */