phy: da8xx-usb: new driver for DA8xx SoC USB PHY

This is a new phy driver for the SoC USB controllers on the TI DA8xx
family of microcontrollers. The USB 1.1 PHY is just a simple on/off.
The USB 2.0 PHY also allows overriding the VBUS and ID pins.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

drivers/phy/Kconfig

@@ -44,6 +44,16 @@ config ARMADA375_USBCLUSTER_PHY
 	depends on OF && HAS_IOMEM
 	select GENERIC_PHY
 
+config PHY_DA8XX_USB
+	tristate "TI DA8xx USB PHY Driver"
+	depends on ARCH_DAVINCI_DA8XX
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the USB PHY on DA8xx SoCs.
+
+	  This driver controls both the USB 1.1 PHY and the USB 2.0 PHY.
+
 config PHY_DM816X_USB
 	tristate "TI dm816x USB PHY driver"
 	depends on ARCH_OMAP2PLUS

drivers/phy/Makefile

@@ -6,6 +6,7 @@ obj-$(CONFIG_GENERIC_PHY)		+= phy-core.o
 obj-$(CONFIG_PHY_BCM_NS_USB2)		+= phy-bcm-ns-usb2.o
 obj-$(CONFIG_PHY_BERLIN_USB)		+= phy-berlin-usb.o
 obj-$(CONFIG_PHY_BERLIN_SATA)		+= phy-berlin-sata.o
+obj-$(CONFIG_PHY_DA8XX_USB)		+= phy-da8xx-usb.o
 obj-$(CONFIG_PHY_DM816X_USB)		+= phy-dm816x-usb.o
 obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY)	+= phy-armada375-usb2.o
 obj-$(CONFIG_BCM_KONA_USB2_PHY)		+= phy-bcm-kona-usb2.o

drivers/phy/phy-da8xx-usb.c

+/*
+ * phy-da8xx-usb - TI DaVinci DA8xx USB PHY driver
+ *
+ * Copyright (C) 2016 David Lechner <david@lechnology.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/mfd/da8xx-cfgchip.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+struct da8xx_usb_phy {
+	struct phy_provider	*phy_provider;
+	struct phy		*usb11_phy;
+	struct phy		*usb20_phy;
+	struct clk		*usb11_clk;
+	struct clk		*usb20_clk;
+	struct regmap		*regmap;
+};
+
+static int da8xx_usb11_phy_power_on(struct phy *phy)
+{
+	struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
+	int ret;
+
+	ret = clk_prepare_enable(d_phy->usb11_clk);
+	if (ret)
+		return ret;
+
+	regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_USB1SUSPENDM,
+			  CFGCHIP2_USB1SUSPENDM);
+
+	return 0;
+}
+
+static int da8xx_usb11_phy_power_off(struct phy *phy)
+{
+	struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
+
+	regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_USB1SUSPENDM, 0);
+
+	clk_disable_unprepare(d_phy->usb11_clk);
+
+	return 0;
+}
+
+static const struct phy_ops da8xx_usb11_phy_ops = {
+	.power_on	= da8xx_usb11_phy_power_on,
+	.power_off	= da8xx_usb11_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int da8xx_usb20_phy_power_on(struct phy *phy)
+{
+	struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
+	int ret;
+
+	ret = clk_prepare_enable(d_phy->usb20_clk);
+	if (ret)
+		return ret;
+
+	regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_OTGPWRDN, 0);
+
+	return 0;
+}
+
+static int da8xx_usb20_phy_power_off(struct phy *phy)
+{
+	struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
+
+	regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_OTGPWRDN,
+			  CFGCHIP2_OTGPWRDN);
+
+	clk_disable_unprepare(d_phy->usb20_clk);
+
+	return 0;
+}
+
+static int da8xx_usb20_phy_set_mode(struct phy *phy, enum phy_mode mode)
+{
+	struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
+	u32 val;
+
+	switch (mode) {
+	case PHY_MODE_USB_HOST:		/* Force VBUS valid, ID = 0 */
+		val = CFGCHIP2_OTGMODE_FORCE_HOST;
+		break;
+	case PHY_MODE_USB_DEVICE:	/* Force VBUS valid, ID = 1 */
+		val = CFGCHIP2_OTGMODE_FORCE_DEVICE;
+		break;
+	case PHY_MODE_USB_OTG:	/* Don't override the VBUS/ID comparators */
+		val = CFGCHIP2_OTGMODE_NO_OVERRIDE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_OTGMODE_MASK,
+			  val);
+
+	return 0;
+}
+
+static const struct phy_ops da8xx_usb20_phy_ops = {
+	.power_on	= da8xx_usb20_phy_power_on,
+	.power_off	= da8xx_usb20_phy_power_off,
+	.set_mode	= da8xx_usb20_phy_set_mode,
+	.owner		= THIS_MODULE,
+};
+
+static struct phy *da8xx_usb_phy_of_xlate(struct device *dev,
+					 struct of_phandle_args *args)
+{
+	struct da8xx_usb_phy *d_phy = dev_get_drvdata(dev);
+
+	if (!d_phy)
+		return ERR_PTR(-ENODEV);
+
+	switch (args->args[0]) {
+	case 0:
+		return d_phy->usb20_phy;
+	case 1:
+		return d_phy->usb11_phy;
+	default:
+		return ERR_PTR(-EINVAL);
+	}
+}
+
+static int da8xx_usb_phy_probe(struct platform_device *pdev)
+{
+	struct device		*dev = &pdev->dev;
+	struct device_node	*node = dev->of_node;
+	struct da8xx_usb_phy	*d_phy;
+
+	d_phy = devm_kzalloc(dev, sizeof(*d_phy), GFP_KERNEL);
+	if (!d_phy)
+		return -ENOMEM;
+
+	if (node)
+		d_phy->regmap = syscon_regmap_lookup_by_compatible(
+							"ti,da830-cfgchip");
+	else
+		d_phy->regmap = syscon_regmap_lookup_by_pdevname("syscon.0");
+	if (IS_ERR(d_phy->regmap)) {
+		dev_err(dev, "Failed to get syscon\n");
+		return PTR_ERR(d_phy->regmap);
+	}
+
+	d_phy->usb11_clk = devm_clk_get(dev, "usb11_phy");
+	if (IS_ERR(d_phy->usb11_clk)) {
+		dev_err(dev, "Failed to get usb11_phy clock\n");
+		return PTR_ERR(d_phy->usb11_clk);
+	}
+
+	d_phy->usb20_clk = devm_clk_get(dev, "usb20_phy");
+	if (IS_ERR(d_phy->usb20_clk)) {
+		dev_err(dev, "Failed to get usb20_phy clock\n");
+		return PTR_ERR(d_phy->usb20_clk);
+	}
+
+	d_phy->usb11_phy = devm_phy_create(dev, node, &da8xx_usb11_phy_ops);
+	if (IS_ERR(d_phy->usb11_phy)) {
+		dev_err(dev, "Failed to create usb11 phy\n");
+		return PTR_ERR(d_phy->usb11_phy);
+	}
+
+	d_phy->usb20_phy = devm_phy_create(dev, node, &da8xx_usb20_phy_ops);
+	if (IS_ERR(d_phy->usb20_phy)) {
+		dev_err(dev, "Failed to create usb20 phy\n");
+		return PTR_ERR(d_phy->usb20_phy);
+	}
+
+	platform_set_drvdata(pdev, d_phy);
+	phy_set_drvdata(d_phy->usb11_phy, d_phy);
+	phy_set_drvdata(d_phy->usb20_phy, d_phy);
+
+	if (node) {
+		d_phy->phy_provider = devm_of_phy_provider_register(dev,
+							da8xx_usb_phy_of_xlate);
+		if (IS_ERR(d_phy->phy_provider)) {
+			dev_err(dev, "Failed to create phy provider\n");
+			return PTR_ERR(d_phy->phy_provider);
+		}
+	} else {
+		int ret;
+
+		ret = phy_create_lookup(d_phy->usb11_phy, "usb-phy", "ohci.0");
+		if (ret)
+			dev_warn(dev, "Failed to create usb11 phy lookup\n");
+		ret = phy_create_lookup(d_phy->usb20_phy, "usb-phy",
+					"musb-da8xx");
+		if (ret)
+			dev_warn(dev, "Failed to create usb20 phy lookup\n");
+	}
+
+	return 0;
+}
+
+static int da8xx_usb_phy_remove(struct platform_device *pdev)
+{
+	struct da8xx_usb_phy *d_phy = platform_get_drvdata(pdev);
+
+	if (!pdev->dev.of_node) {
+		phy_remove_lookup(d_phy->usb20_phy, "usb-phy", "musb-da8xx");
+		phy_remove_lookup(d_phy->usb11_phy, "usb-phy", "ohci.0");
+	}
+
+	return 0;
+}
+
+static const struct of_device_id da8xx_usb_phy_ids[] = {
+	{ .compatible = "ti,da830-usb-phy" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, da8xx_usb_phy_ids);
+
+static struct platform_driver da8xx_usb_phy_driver = {
+	.probe	= da8xx_usb_phy_probe,
+	.remove	= da8xx_usb_phy_remove,
+	.driver	= {
+		.name	= "da8xx-usb-phy",
+		.of_match_table = da8xx_usb_phy_ids,
+	},
+};
+
+module_platform_driver(da8xx_usb_phy_driver);
+
+MODULE_ALIAS("platform:da8xx-usb-phy");
+MODULE_AUTHOR("David Lechner <david@lechnology.com>");
+MODULE_DESCRIPTION("TI DA8xx USB PHY driver");
+MODULE_LICENSE("GPL v2");