Skip to content

L
linux
Commit f516fb70 authored by Rob Herring's avatar Rob Herring
Browse files
Options

dt-bindings: Whitespace clean-ups in schema files 

Clean-up incorrect indentation, extra spaces, long lines, and missing
EOF newline in schema files. Most of the clean-ups are for list
indentation which should always be 2 spaces more than the preceding
keyword.

Found with yamllint (which I plan to integrate into the checks).

Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-clk@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-spi@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-remoteproc@vger.kernel.org
Cc: linux-hwmon@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: netdev@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Acked-by: default avatarSam Ravnborg <sam@ravnborg.org>
Signed-off-by: default avatarRob Herring <robh@kernel.org>
parent 7c2a69f6
Hide whitespace changes
Inline Side-by-side
Showing with 1107 additions and 1118 deletions
Documentation/devicetree/bindings/arm/arm,integrator.yaml
View file @ f516fb70
...@@ -67,9 +67,9 @@ patternProperties: ...@@ -67,9 +67,9 @@ patternProperties:
compatible: compatible:
items: items:
- enum: - enum:
- arm,integrator-ap-syscon - arm,integrator-ap-syscon
- arm,integrator-cp-syscon - arm,integrator-cp-syscon
- arm,integrator-sp-syscon - arm,integrator-sp-syscon
- const: syscon - const: syscon
reg: reg:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/arm/arm,realview.yaml
View file @ f516fb70
...@@ -55,20 +55,20 @@ properties: ...@@ -55,20 +55,20 @@ properties:
compatible: compatible:
oneOf: oneOf:
- items: - items:
- const: arm,realview-eb-soc - const: arm,realview-eb-soc
- const: simple-bus - const: simple-bus
- items: - items:
- const: arm,realview-pb1176-soc - const: arm,realview-pb1176-soc
- const: simple-bus - const: simple-bus
- items: - items:
- const: arm,realview-pb11mp-soc - const: arm,realview-pb11mp-soc
- const: simple-bus - const: simple-bus
- items: - items:
- const: arm,realview-pba8-soc - const: arm,realview-pba8-soc
- const: simple-bus - const: simple-bus
- items: - items:
- const: arm,realview-pbx-soc - const: arm,realview-pbx-soc
- const: simple-bus - const: simple-bus
patternProperties: patternProperties:
"^.*syscon@[0-9a-f]+$": "^.*syscon@[0-9a-f]+$":
...@@ -79,35 +79,35 @@ properties: ...@@ -79,35 +79,35 @@ properties:
compatible: compatible:
oneOf: oneOf:
- items: - items:
- const: arm,realview-eb11mp-revb-syscon - const: arm,realview-eb11mp-revb-syscon
- const: arm,realview-eb-syscon - const: arm,realview-eb-syscon
- const: syscon - const: syscon
- const: simple-mfd - const: simple-mfd
- items: - items:
- const: arm,realview-eb11mp-revc-syscon - const: arm,realview-eb11mp-revc-syscon
- const: arm,realview-eb-syscon - const: arm,realview-eb-syscon
- const: syscon - const: syscon
- const: simple-mfd - const: simple-mfd
- items: - items:
- const: arm,realview-eb-syscon - const: arm,realview-eb-syscon
- const: syscon - const: syscon
- const: simple-mfd - const: simple-mfd
- items: - items:
- const: arm,realview-pb1176-syscon - const: arm,realview-pb1176-syscon
- const: syscon - const: syscon
- const: simple-mfd - const: simple-mfd
- items: - items:
- const: arm,realview-pb11mp-syscon - const: arm,realview-pb11mp-syscon
- const: syscon - const: syscon
- const: simple-mfd - const: simple-mfd
- items: - items:
- const: arm,realview-pba8-syscon - const: arm,realview-pba8-syscon
- const: syscon - const: syscon
- const: simple-mfd - const: simple-mfd
- items: - items:
- const: arm,realview-pbx-syscon - const: arm,realview-pbx-syscon
- const: syscon - const: syscon
- const: simple-mfd - const: simple-mfd
required: required:
- compatible - compatible
......
Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
View file @ f516fb70
...@@ -165,10 +165,10 @@ patternProperties: ...@@ -165,10 +165,10 @@ patternProperties:
compatible: compatible:
oneOf: oneOf:
- items: - items:
- enum: - enum:
- arm,vexpress,v2m-p1 - arm,vexpress,v2m-p1
- arm,vexpress,v2p-p1 - arm,vexpress,v2p-p1
- const: simple-bus - const: simple-bus
- const: simple-bus - const: simple-bus
motherboard: motherboard:
type: object type: object
...@@ -186,8 +186,8 @@ patternProperties: ...@@ -186,8 +186,8 @@ patternProperties:
compatible: compatible:
items: items:
- enum: - enum:
- arm,vexpress,v2m-p1 - arm,vexpress,v2m-p1
- arm,vexpress,v2p-p1 - arm,vexpress,v2p-p1
- const: simple-bus - const: simple-bus
arm,v2m-memory-map: arm,v2m-memory-map:
description: This describes the memory map type. description: This describes the memory map type.
......
Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml
View file @ f516fb70
...@@ -15,7 +15,7 @@ properties: ...@@ -15,7 +15,7 @@ properties:
compatible: compatible:
items: items:
- enum: - enum:
- brcm,bcm28155-ap - brcm,bcm28155-ap
- const: brcm,bcm11351 - const: brcm,bcm11351
... ...
Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml
View file @ f516fb70
...@@ -15,7 +15,7 @@ properties: ...@@ -15,7 +15,7 @@ properties:
compatible: compatible:
items: items:
- enum: - enum:
- brcm,bcm21664-garnet - brcm,bcm21664-garnet
- const: brcm,bcm21664 - const: brcm,bcm21664
... ...
Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml
View file @ f516fb70
...@@ -15,7 +15,7 @@ properties: ...@@ -15,7 +15,7 @@ properties:
compatible: compatible:
items: items:
- enum: - enum:
- brcm,bcm23550-sparrow - brcm,bcm23550-sparrow
- const: brcm,bcm23550 - const: brcm,bcm23550
... ...
Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml
View file @ f516fb70
...@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# ...@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Broadcom Cygnus device tree bindings title: Broadcom Cygnus device tree bindings
maintainers: maintainers:
- Ray Jui <rjui@broadcom.com> - Ray Jui <rjui@broadcom.com>
- Scott Branden <sbranden@broadcom.com> - Scott Branden <sbranden@broadcom.com>
properties: properties:
$nodename: $nodename:
...@@ -16,14 +16,14 @@ properties: ...@@ -16,14 +16,14 @@ properties:
compatible: compatible:
items: items:
- enum: - enum:
- brcm,bcm11300 - brcm,bcm11300
- brcm,bcm11320 - brcm,bcm11320
- brcm,bcm11350 - brcm,bcm11350
- brcm,bcm11360 - brcm,bcm11360
- brcm,bcm58300 - brcm,bcm58300
- brcm,bcm58302 - brcm,bcm58302
- brcm,bcm58303 - brcm,bcm58303
- brcm,bcm58305 - brcm,bcm58305
- const: brcm,cygnus - const: brcm,cygnus
... ...
Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml
View file @ f516fb70
...@@ -21,7 +21,7 @@ properties: ...@@ -21,7 +21,7 @@ properties:
compatible: compatible:
items: items:
- enum: - enum:
- ubnt,unifi-switch8 - ubnt,unifi-switch8
- const: brcm,bcm53342 - const: brcm,bcm53342
- const: brcm,hr2 - const: brcm,hr2
......
Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml
View file @ f516fb70
...@@ -16,8 +16,8 @@ properties: ...@@ -16,8 +16,8 @@ properties:
compatible: compatible:
items: items:
- enum: - enum:
- brcm,ns2-svk - brcm,ns2-svk
- brcm,ns2-xmc - brcm,ns2-xmc
- const: brcm,ns2 - const: brcm,ns2
... ...
Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
View file @ f516fb70
...@@ -24,13 +24,13 @@ properties: ...@@ -24,13 +24,13 @@ properties:
compatible: compatible:
items: items:
- enum: - enum:
- brcm,bcm58522 - brcm,bcm58522
- brcm,bcm58525 - brcm,bcm58525
- brcm,bcm58535 - brcm,bcm58535
- brcm,bcm58622 - brcm,bcm58622
- brcm,bcm58623 - brcm,bcm58623
- brcm,bcm58625 - brcm,bcm58625
- brcm,bcm88312 - brcm,bcm88312
- const: brcm,nsp - const: brcm,nsp
... ...
Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml
View file @ f516fb70
...@@ -16,9 +16,9 @@ properties: ...@@ -16,9 +16,9 @@ properties:
compatible: compatible:
items: items:
- enum: - enum:
- brcm,bcm958742k - brcm,bcm958742k
- brcm,bcm958742t - brcm,bcm958742t
- brcm,bcm958802a802x - brcm,bcm958802a802x
- const: brcm,stingray - const: brcm,stingray
... ...
Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml
View file @ f516fb70
...@@ -15,8 +15,8 @@ properties: ...@@ -15,8 +15,8 @@ properties:
compatible: compatible:
items: items:
- enum: - enum:
- brcm,vulcan-eval - brcm,vulcan-eval
- cavium,thunderx2-cn9900 - cavium,thunderx2-cn9900
- const: brcm,vulcan-soc - const: brcm,vulcan-soc
... ...
Documentation/devicetree/bindings/arm/coresight-cti.yaml
View file @ f516fb70
...@@ -82,12 +82,12 @@ properties: ...@@ -82,12 +82,12 @@ properties:
compatible: compatible:
oneOf: oneOf:
- items: - items:
- const: arm,coresight-cti - const: arm,coresight-cti
- const: arm,primecell - const: arm,primecell
- items: - items:
- const: arm,coresight-cti-v8-arch - const: arm,coresight-cti-v8-arch
- const: arm,coresight-cti - const: arm,coresight-cti
- const: arm,primecell - const: arm,primecell
reg: reg:
maxItems: 1 maxItems: 1
...@@ -191,16 +191,16 @@ patternProperties: ...@@ -191,16 +191,16 @@ patternProperties:
anyOf: anyOf:
- required: - required:
- arm,trig-in-sigs - arm,trig-in-sigs
- required: - required:
- arm,trig-out-sigs - arm,trig-out-sigs
oneOf: oneOf:
- required: - required:
- arm,trig-conn-name - arm,trig-conn-name
- required: - required:
- cpu - cpu
- required: - required:
- arm,cs-dev-assoc - arm,cs-dev-assoc
required: required:
- reg - reg
......
Documentation/devicetree/bindings/arm/cpus.yaml
View file @ f516fb70
...@@ -330,8 +330,8 @@ if: ...@@ -330,8 +330,8 @@ if:
- enable-method - enable-method
then: then:
required: required:
- secondary-boot-reg - secondary-boot-reg
required: required:
- device_type - device_type
......
Documentation/devicetree/bindings/arm/fsl.yaml
View file @ f516fb70
...@@ -273,8 +273,8 @@ properties: ...@@ -273,8 +273,8 @@ properties:
- fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board - fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board
- kontron,imx6ull-n6411-som # Kontron N6411 SOM - kontron,imx6ull-n6411-som # Kontron N6411 SOM
- myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board
- toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Evaluation Board - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Eval Board
- toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / Bluetooth Module on Colibri Evaluation Board - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board
- const: fsl,imx6ull - const: fsl,imx6ull
- description: Kontron N6411 S Board - description: Kontron N6411 S Board
...@@ -312,9 +312,12 @@ properties: ...@@ -312,9 +312,12 @@ properties:
- toradex,colibri-imx7d # Colibri iMX7 Dual Module - toradex,colibri-imx7d # Colibri iMX7 Dual Module
- toradex,colibri-imx7d-aster # Colibri iMX7 Dual Module on Aster Carrier Board - toradex,colibri-imx7d-aster # Colibri iMX7 Dual Module on Aster Carrier Board
- toradex,colibri-imx7d-emmc # Colibri iMX7 Dual 1GB (eMMC) Module - toradex,colibri-imx7d-emmc # Colibri iMX7 Dual 1GB (eMMC) Module
- toradex,colibri-imx7d-emmc-aster # Colibri iMX7 Dual 1GB (eMMC) Module on Aster Carrier Board - toradex,colibri-imx7d-emmc-aster # Colibri iMX7 Dual 1GB (eMMC) Module on
- toradex,colibri-imx7d-emmc-eval-v3 # Colibri iMX7 Dual 1GB (eMMC) Module on Colibri Evaluation Board V3 # Aster Carrier Board
- toradex,colibri-imx7d-eval-v3 # Colibri iMX7 Dual Module on Colibri Evaluation Board V3 - toradex,colibri-imx7d-emmc-eval-v3 # Colibri iMX7 Dual 1GB (eMMC) Module on
# Colibri Evaluation Board V3
- toradex,colibri-imx7d-eval-v3 # Colibri iMX7 Dual Module on
# Colibri Evaluation Board V3
- tq,imx7d-mba7 # i.MX7D TQ MBa7 with TQMa7D SoM - tq,imx7d-mba7 # i.MX7D TQ MBa7 with TQMa7D SoM
- zii,imx7d-rmu2 # ZII RMU2 Board - zii,imx7d-rmu2 # ZII RMU2 Board
- zii,imx7d-rpu2 # ZII RPU2 Board - zii,imx7d-rpu2 # ZII RPU2 Board
......
Documentation/devicetree/bindings/arm/intel,keembay.yaml
View file @ f516fb70
...@@ -14,6 +14,6 @@ properties: ...@@ -14,6 +14,6 @@ properties:
compatible: compatible:
items: items:
- enum: - enum:
- intel,keembay-evm - intel,keembay-evm
- const: intel,keembay - const: intel,keembay
... ...
Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
View file @ f516fb70
...@@ -17,22 +17,22 @@ properties: ...@@ -17,22 +17,22 @@ properties:
compatible: compatible:
oneOf: oneOf:
- items: - items:
- enum: - enum:
- mediatek,mt2701-pericfg - mediatek,mt2701-pericfg
- mediatek,mt2712-pericfg - mediatek,mt2712-pericfg
- mediatek,mt6765-pericfg - mediatek,mt6765-pericfg
- mediatek,mt7622-pericfg - mediatek,mt7622-pericfg
- mediatek,mt7629-pericfg - mediatek,mt7629-pericfg
- mediatek,mt8135-pericfg - mediatek,mt8135-pericfg
- mediatek,mt8173-pericfg - mediatek,mt8173-pericfg
- mediatek,mt8183-pericfg - mediatek,mt8183-pericfg
- mediatek,mt8516-pericfg - mediatek,mt8516-pericfg
- const: syscon - const: syscon
- items: - items:
# Special case for mt7623 for backward compatibility # Special case for mt7623 for backward compatibility
- const: mediatek,mt7623-pericfg - const: mediatek,mt7623-pericfg
- const: mediatek,mt2701-pericfg - const: mediatek,mt2701-pericfg
- const: syscon - const: syscon
reg: reg:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml
View file @ f516fb70
...@@ -19,7 +19,7 @@ description: | ...@@ -19,7 +19,7 @@ description: |
reported to the APB terminator (APB Errors Handler Block). reported to the APB terminator (APB Errors Handler Block).
allOf: allOf:
- $ref: /schemas/simple-bus.yaml# - $ref: /schemas/simple-bus.yaml#
properties: properties:
compatible: compatible:
......
Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml
View file @ f516fb70
...@@ -23,7 +23,7 @@ description: | ...@@ -23,7 +23,7 @@ description: |
accessible by means of the Baikal-T1 System Controller. accessible by means of the Baikal-T1 System Controller.
allOf: allOf:
- $ref: /schemas/simple-bus.yaml# - $ref: /schemas/simple-bus.yaml#
properties: properties:
compatible: compatible:
......
Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
View file @ f516fb70
...@@ -95,10 +95,10 @@ allOf: ...@@ -95,10 +95,10 @@ allOf:
# Devices without builtin crystal # Devices without builtin crystal
properties: properties:
clock-names: clock-names:
minItems: 1 minItems: 1
maxItems: 2 maxItems: 2
items: items:
enum: [ xin, clkin ] enum: [ xin, clkin ]
clocks: clocks:
minItems: 1 minItems: 1
maxItems: 2 maxItems: 2
......
Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
View file @ f516fb70
...@@ -47,12 +47,12 @@ properties: ...@@ -47,12 +47,12 @@ properties:
compatible: compatible:
items: items:
- enum: - enum:
- ingenic,jz4740-cgu - ingenic,jz4740-cgu
- ingenic,jz4725b-cgu - ingenic,jz4725b-cgu
- ingenic,jz4770-cgu - ingenic,jz4770-cgu
- ingenic,jz4780-cgu - ingenic,jz4780-cgu
- ingenic,x1000-cgu - ingenic,x1000-cgu
- ingenic,x1830-cgu - ingenic,x1830-cgu
- const: simple-mfd - const: simple-mfd
minItems: 1 minItems: 1
...@@ -68,8 +68,8 @@ properties: ...@@ -68,8 +68,8 @@ properties:
items: items:
- const: ext - const: ext
- enum: - enum:
- rtc - rtc
- osc32k # Different name, same clock - osc32k # Different name, same clock
assigned-clocks: assigned-clocks:
minItems: 1 minItems: 1
......
Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
View file @ f516fb70
...@@ -65,7 +65,7 @@ properties: ...@@ -65,7 +65,7 @@ properties:
protected-clocks: protected-clocks:
description: description:
Protected clock specifier list as per common clock binding Protected clock specifier list as per common clock binding
vdd-gfx-supply: vdd-gfx-supply:
description: description:
......
Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml
View file @ f516fb70
...@@ -19,15 +19,15 @@ description: ...@@ -19,15 +19,15 @@ description:
properties: properties:
compatible: compatible:
oneOf: oneOf:
- const: renesas,r8a73a4-cpg-clocks # R-Mobile APE6 - const: renesas,r8a73a4-cpg-clocks # R-Mobile APE6
- const: renesas,r8a7740-cpg-clocks # R-Mobile A1 - const: renesas,r8a7740-cpg-clocks # R-Mobile A1
- const: renesas,r8a7778-cpg-clocks # R-Car M1 - const: renesas,r8a7778-cpg-clocks # R-Car M1
- const: renesas,r8a7779-cpg-clocks # R-Car H1 - const: renesas,r8a7779-cpg-clocks # R-Car H1
- items: - items:
- enum: - enum:
- renesas,r7s72100-cpg-clocks # RZ/A1H - renesas,r7s72100-cpg-clocks # RZ/A1H
- const: renesas,rz-cpg-clocks # RZ/A1 - const: renesas,rz-cpg-clocks # RZ/A1
- const: renesas,sh73a0-cpg-clocks # SH-Mobile AG5 - const: renesas,sh73a0-cpg-clocks # SH-Mobile AG5
reg: reg:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
View file @ f516fb70
...@@ -16,7 +16,7 @@ properties: ...@@ -16,7 +16,7 @@ properties:
"#clock-cells": "#clock-cells":
const: 1 const: 1
compatible : compatible:
enum: enum:
- sprd,sc9863a-ap-clk - sprd,sc9863a-ap-clk
- sprd,sc9863a-aon-clk - sprd,sc9863a-aon-clk
......
Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
View file @ f516fb70
...@@ -162,14 +162,13 @@ required: ...@@ -162,14 +162,13 @@ required:
additionalProperties: false additionalProperties: false
examples: examples:
- | - |
#include <dt-bindings/clock/imx8mq-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/imx8mq-reset.h>
#include <dt-bindings/clock/imx8mq-clock.h> mipi_dsi: mipi_dsi@30a00000 {
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/imx8mq-reset.h>
mipi_dsi: mipi_dsi@30a00000 {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
compatible = "fsl,imx8mq-nwl-dsi"; compatible = "fsl,imx8mq-nwl-dsi";
...@@ -224,4 +223,4 @@ examples: ...@@ -224,4 +223,4 @@ examples:
}; };
}; };
}; };
}; };
Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
View file @ f516fb70
...@@ -119,17 +119,17 @@ then: ...@@ -119,17 +119,17 @@ then:
# The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks. # The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks.
# These clocks are optional. # These clocks are optional.
- enum: - enum:
- extal - extal
- dclkin.0 - dclkin.0
- dclkin.1 - dclkin.1
- enum: - enum:
- extal - extal
- dclkin.0 - dclkin.0
- dclkin.1 - dclkin.1
- enum: - enum:
- extal - extal
- dclkin.0 - dclkin.0
- dclkin.1 - dclkin.1
required: required:
- clock-names - clock-names
......
Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
View file @ f516fb70
...@@ -18,16 +18,16 @@ properties: ...@@ -18,16 +18,16 @@ properties:
compatible: compatible:
oneOf: oneOf:
- items: - items:
- enum: - enum:
- ti,ths8134a - ti,ths8134a
- ti,ths8134b - ti,ths8134b
- const: ti,ths8134 - const: ti,ths8134
- enum: - enum:
- adi,adv7123 - adi,adv7123
- dumb-vga-dac - dumb-vga-dac
- ti,opa362 - ti,opa362
- ti,ths8134 - ti,ths8134
- ti,ths8135 - ti,ths8135
ports: ports:
type: object type: object
......
Documentation/devicetree/bindings/display/dsi-controller.yaml
View file @ f516fb70
...@@ -55,11 +55,11 @@ patternProperties: ...@@ -55,11 +55,11 @@ patternProperties:
clock-master: clock-master:
type: boolean type: boolean
description: description:
Should be enabled if the host is being used in conjunction with Should be enabled if the host is being used in conjunction with
another DSI host to drive the same peripheral. Hardware supporting another DSI host to drive the same peripheral. Hardware supporting
such a configuration generally requires the data on both the busses such a configuration generally requires the data on both the busses
to be driven by the same clock. Only the DSI host instance to be driven by the same clock. Only the DSI host instance
controlling this clock should contain this property. controlling this clock should contain this property.
enforce-video-mode: enforce-video-mode:
type: boolean type: boolean
......
Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
View file @ f516fb70
...@@ -21,9 +21,9 @@ properties: ...@@ -21,9 +21,9 @@ properties:
items: items:
- enum: - enum:
# Waveshare 3.5" 320x480 Color TFT LCD # Waveshare 3.5" 320x480 Color TFT LCD
- waveshare,rpi-lcd-35 - waveshare,rpi-lcd-35
# Ozzmaker 3.5" 320x480 Color TFT LCD # Ozzmaker 3.5" 320x480 Color TFT LCD
- ozzmaker,piscreen - ozzmaker,piscreen
- const: ilitek,ili9486 - const: ilitek,ili9486
spi-max-frequency: spi-max-frequency:
......
Documentation/devicetree/bindings/display/ingenic,ipu.yaml
View file @ f516fb70
...@@ -13,11 +13,11 @@ properties: ...@@ -13,11 +13,11 @@ properties:
compatible: compatible:
oneOf: oneOf:
- enum: - enum:
- ingenic,jz4725b-ipu - ingenic,jz4725b-ipu
- ingenic,jz4760-ipu - ingenic,jz4760-ipu
- items: - items:
- const: ingenic,jz4770-ipu - const: ingenic,jz4770-ipu
- const: ingenic,jz4760-ipu - const: ingenic,jz4760-ipu
reg: reg:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/display/ingenic,lcd.yaml
View file @ f516fb70
...@@ -58,11 +58,11 @@ properties: ...@@ -58,11 +58,11 @@ properties:
- port@0 - port@0
required: required:
- compatible - compatible
- reg - reg
- interrupts - interrupts
- clocks - clocks
- clock-names - clock-names
if: if:
properties: properties:
......
Documentation/devicetree/bindings/display/msm/gmu.yaml
View file @ f516fb70
...@@ -38,10 +38,10 @@ properties: ...@@ -38,10 +38,10 @@ properties:
clocks: clocks:
items: items:
- description: GMU clock - description: GMU clock
- description: GPU CX clock - description: GPU CX clock
- description: GPU AXI clock - description: GPU AXI clock
- description: GPU MEMNOC clock - description: GPU MEMNOC clock
clock-names: clock-names:
items: items:
...@@ -52,8 +52,8 @@ properties: ...@@ -52,8 +52,8 @@ properties:
interrupts: interrupts:
items: items:
- description: GMU HFI interrupt - description: GMU HFI interrupt
- description: GMU interrupt - description: GMU interrupt
interrupt-names: interrupt-names:
...@@ -62,14 +62,14 @@ properties: ...@@ -62,14 +62,14 @@ properties:
- const: gmu - const: gmu
power-domains: power-domains:
items: items:
- description: CX power domain - description: CX power domain
- description: GX power domain - description: GX power domain
power-domain-names: power-domain-names:
items: items:
- const: cx - const: cx
- const: gx - const: gx
iommus: iommus:
maxItems: 1 maxItems: 1
...@@ -90,13 +90,13 @@ required: ...@@ -90,13 +90,13 @@ required:
- operating-points-v2 - operating-points-v2
examples: examples:
- | - |
#include <dt-bindings/clock/qcom,gpucc-sdm845.h> #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
#include <dt-bindings/clock/qcom,gcc-sdm845.h> #include <dt-bindings/clock/qcom,gcc-sdm845.h>
#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/arm-gic.h>
gmu: gmu@506a000 { gmu: gmu@506a000 {
compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
reg = <0x506a000 0x30000>, reg = <0x506a000 0x30000>,
...@@ -120,4 +120,4 @@ examples: ...@@ -120,4 +120,4 @@ examples:
iommus = <&adreno_smmu 5>; iommus = <&adreno_smmu 5>;
operating-points-v2 = <&gmu_opp_table>; operating-points-v2 = <&gmu_opp_table>;
}; };
Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml
View file @ f516fb70
...@@ -24,9 +24,9 @@ properties: ...@@ -24,9 +24,9 @@ properties:
reg: true reg: true
reset-gpios: true reset-gpios: true
vdd-supply: vdd-supply:
description: core voltage supply description: core voltage supply
vddio-supply: vddio-supply:
description: vddio supply description: vddio supply
required: required:
- compatible - compatible
......
Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
View file @ f516fb70
...@@ -48,12 +48,12 @@ properties: ...@@ -48,12 +48,12 @@ properties:
port: true port: true
required: required:
- compatible - compatible
- reg - reg
- enable-gpios - enable-gpios
- pp1800-supply - pp1800-supply
- avdd-supply - avdd-supply
- avee-supply - avee-supply
additionalProperties: false additionalProperties: false
......
Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml
View file @ f516fb70
...@@ -19,9 +19,9 @@ properties: ...@@ -19,9 +19,9 @@ properties:
backlight: true backlight: true
reset-gpios: true reset-gpios: true
iovcc-supply: iovcc-supply:
description: regulator that supplies the iovcc voltage description: regulator that supplies the iovcc voltage
vdd-supply: vdd-supply:
description: regulator that supplies the vdd voltage description: regulator that supplies the vdd voltage
required: required:
- compatible - compatible
......
Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml
View file @ f516fb70
...@@ -19,11 +19,11 @@ properties: ...@@ -19,11 +19,11 @@ properties:
backlight: true backlight: true
reset-gpios: true reset-gpios: true
avdd-supply: avdd-supply:
description: regulator that supplies the AVDD voltage description: regulator that supplies the AVDD voltage
dvdd-supply: dvdd-supply:
description: regulator that supplies the DVDD voltage description: regulator that supplies the DVDD voltage
cvdd-supply: cvdd-supply:
description: regulator that supplies the CVDD voltage description: regulator that supplies the CVDD voltage
required: required:
- compatible - compatible
......
Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
View file @ f516fb70
...@@ -25,8 +25,7 @@ properties: ...@@ -25,8 +25,7 @@ properties:
compatible: compatible:
items: items:
- enum: - enum:
- dlink,dir-685-panel - dlink,dir-685-panel
- const: ilitek,ili9322 - const: ilitek,ili9322
reset-gpios: true reset-gpios: true
......
Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
View file @ f516fb70
...@@ -13,8 +13,7 @@ properties: ...@@ -13,8 +13,7 @@ properties:
compatible: compatible:
items: items:
- enum: - enum:
- bananapi,lhr050h41 - bananapi,lhr050h41
- const: ilitek,ili9881c - const: ilitek,ili9881c
backlight: true backlight: true
......
Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
View file @ f516fb70
...@@ -21,9 +21,9 @@ properties: ...@@ -21,9 +21,9 @@ properties:
backlight: true backlight: true
reset-gpios: true reset-gpios: true
iovcc-supply: iovcc-supply:
description: regulator that supplies the iovcc voltage description: regulator that supplies the iovcc voltage
vci-supply: vci-supply:
description: regulator that supplies the vci voltage description: regulator that supplies the vci voltage
required: required:
- compatible - compatible
......
Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
View file @ f516fb70
...@@ -19,9 +19,9 @@ properties: ...@@ -19,9 +19,9 @@ properties:
backlight: true backlight: true
reset-gpios: true reset-gpios: true
iovcc-supply: iovcc-supply:
description: regulator that supplies the iovcc voltage description: regulator that supplies the iovcc voltage
vcc-supply: vcc-supply:
description: regulator that supplies the vcc voltage description: regulator that supplies the vcc voltage
required: required:
- compatible - compatible
......
Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
View file @ f516fb70
...@@ -25,9 +25,9 @@ properties: ...@@ -25,9 +25,9 @@ properties:
reg: true reg: true
reset-gpios: true reset-gpios: true
vdd-supply: vdd-supply:
description: regulator that supplies the vdd voltage description: regulator that supplies the vdd voltage
vddi-supply: vddi-supply:
description: regulator that supplies the vddi voltage description: regulator that supplies the vddi voltage
backlight: true backlight: true
required: required:
......
Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml
View file @ f516fb70
...@@ -27,10 +27,10 @@ properties: ...@@ -27,10 +27,10 @@ properties:
compatible: compatible:
items: items:
- enum: - enum:
- motorola,droid4-panel # Panel from Motorola Droid4 phone - motorola,droid4-panel # Panel from Motorola Droid4 phone
- nokia,himalaya # Panel from Nokia N950 phone - nokia,himalaya # Panel from Nokia N950 phone
- tpo,taal # Panel from OMAP4 SDP board - tpo,taal # Panel from OMAP4 SDP board
- const: panel-dsi-cm # Generic DSI command mode panel compatible fallback - const: panel-dsi-cm # Generic DSI command mode panel compatible fallback
reg: reg:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/display/panel/panel-timing.yaml
View file @ f516fb70
...@@ -59,7 +59,7 @@ description: | ...@@ -59,7 +59,7 @@ description: |
properties: properties:
clock-frequency: clock-frequency:
description: Panel clock in Hz description: Panel clock in Hz
hactive: hactive:
$ref: /schemas/types.yaml#/definitions/uint32 $ref: /schemas/types.yaml#/definitions/uint32
...@@ -200,15 +200,15 @@ properties: ...@@ -200,15 +200,15 @@ properties:
description: Enable double clock mode description: Enable double clock mode
required: required:
- clock-frequency - clock-frequency
- hactive - hactive
- vactive - vactive
- hfront-porch - hfront-porch
- hback-porch - hback-porch
- hsync-len - hsync-len
- vfront-porch - vfront-porch
- vback-porch - vback-porch
- vsync-len - vsync-len
additionalProperties: false additionalProperties: false
......
Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml
View file @ f516fb70
...@@ -10,8 +10,8 @@ maintainers: ...@@ -10,8 +10,8 @@ maintainers:
- Philippe CORNU <philippe.cornu@st.com> - Philippe CORNU <philippe.cornu@st.com>
description: | description: |
The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD
panel connected using a MIPI-DSI video interface. panel connected using a MIPI-DSI video interface.
allOf: allOf:
- $ref: panel-common.yaml# - $ref: panel-common.yaml#
......
Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml
View file @ f516fb70
...@@ -18,9 +18,9 @@ properties: ...@@ -18,9 +18,9 @@ properties:
reg: true reg: true
reset-gpios: true reset-gpios: true
vdd3-supply: vdd3-supply:
description: core voltage supply description: core voltage supply
vci-supply: vci-supply:
description: voltage supply for analog circuits description: voltage supply for analog circuits
required: required:
- compatible - compatible
......
Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
View file @ f516fb70
...@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# ...@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Visionox model RM69299 Panels Device Tree Bindings. title: Visionox model RM69299 Panels Device Tree Bindings.
maintainers: maintainers:
- Harigovindan P <harigovi@codeaurora.org> - Harigovindan P <harigovi@codeaurora.org>
description: | description: |
This binding is for display panels using a Visionox RM692999 panel. This binding is for display panels using a Visionox RM692999 panel.
......
Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
View file @ f516fb70
...@@ -45,7 +45,7 @@ properties: ...@@ -45,7 +45,7 @@ properties:
phy-dsi-supply: phy-dsi-supply:
description: description:
Phandle of the regulator that provides the supply voltage. Phandle of the regulator that provides the supply voltage.
ports: ports:
type: object type: object
...@@ -147,4 +147,3 @@ examples: ...@@ -147,4 +147,3 @@ examples:
... ...
Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
View file @ f516fb70
...@@ -78,7 +78,7 @@ properties: ...@@ -78,7 +78,7 @@ properties:
- const: vp4 - const: vp4
interrupts: interrupts:
items: items:
- description: common_m DSS Master common - description: common_m DSS Master common
- description: common_s0 DSS Shared common 0 - description: common_s0 DSS Shared common 0
- description: common_s1 DSS Shared common 1 - description: common_s1 DSS Shared common 1
......
Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
View file @ f516fb70
...@@ -56,8 +56,8 @@ properties: ...@@ -56,8 +56,8 @@ properties:
memory-region: memory-region:
description: description:
phandle to a node describing reserved memory (System RAM memory) phandle to a node describing reserved memory (System RAM memory)
used by DSP (see bindings/reserved-memory/reserved-memory.txt) used by DSP (see bindings/reserved-memory/reserved-memory.txt)
maxItems: 1 maxItems: 1
required: required:
......
Documentation/devicetree/bindings/example-schema.yaml
View file @ f516fb70
...@@ -177,10 +177,10 @@ properties: ...@@ -177,10 +177,10 @@ properties:
dependencies: dependencies:
# 'vendor,bool-property' is only allowed when 'vendor,string-array-property' # 'vendor,bool-property' is only allowed when 'vendor,string-array-property'
# is present # is present
vendor,bool-property: [ vendor,string-array-property ] vendor,bool-property: [ 'vendor,string-array-property' ]
# Expressing 2 properties in both orders means all of the set of properties # Expressing 2 properties in both orders means all of the set of properties
# must be present or none of them. # must be present or none of them.
vendor,string-array-property: [ vendor,bool-property ] vendor,string-array-property: [ 'vendor,bool-property' ]
required: required:
- compatible - compatible
......
Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
View file @ f516fb70
...@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# ...@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: IBM FSI-attached SPI controllers title: IBM FSI-attached SPI controllers
maintainers: maintainers:
- Eddie James <eajames@linux.ibm.com> - Eddie James <eajames@linux.ibm.com>
description: | description: |
This binding describes an FSI CFAM engine called the FSI2SPI. Therefore this This binding describes an FSI CFAM engine called the FSI2SPI. Therefore this
......
Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
View file @ f516fb70
...@@ -19,10 +19,8 @@ properties: ...@@ -19,10 +19,8 @@ properties:
reg: reg:
items: items:
- description: the I/O address containing the GPIO controller - description: the I/O address containing the GPIO controller registers.
registers. - description: the I/O address containing the Chip Common A interrupt registers.
- description: the I/O address containing the Chip Common A interrupt
registers.
gpio-controller: true gpio-controller: true
......
Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
View file @ f516fb70
...@@ -13,39 +13,39 @@ properties: ...@@ -13,39 +13,39 @@ properties:
compatible: compatible:
oneOf: oneOf:
- items: - items:
- enum: - enum:
- renesas,gpio-r8a7778 # R-Car M1 - renesas,gpio-r8a7778 # R-Car M1
- renesas,gpio-r8a7779 # R-Car H1 - renesas,gpio-r8a7779 # R-Car H1
- const: renesas,rcar-gen1-gpio # R-Car Gen1 - const: renesas,rcar-gen1-gpio # R-Car Gen1
- items: - items:
- enum: - enum:
- renesas,gpio-r8a7742 # RZ/G1H - renesas,gpio-r8a7742 # RZ/G1H
- renesas,gpio-r8a7743 # RZ/G1M - renesas,gpio-r8a7743 # RZ/G1M
- renesas,gpio-r8a7744 # RZ/G1N - renesas,gpio-r8a7744 # RZ/G1N
- renesas,gpio-r8a7745 # RZ/G1E - renesas,gpio-r8a7745 # RZ/G1E
- renesas,gpio-r8a77470 # RZ/G1C - renesas,gpio-r8a77470 # RZ/G1C
- renesas,gpio-r8a7790 # R-Car H2 - renesas,gpio-r8a7790 # R-Car H2
- renesas,gpio-r8a7791 # R-Car M2-W - renesas,gpio-r8a7791 # R-Car M2-W
- renesas,gpio-r8a7792 # R-Car V2H - renesas,gpio-r8a7792 # R-Car V2H
- renesas,gpio-r8a7793 # R-Car M2-N - renesas,gpio-r8a7793 # R-Car M2-N
- renesas,gpio-r8a7794 # R-Car E2 - renesas,gpio-r8a7794 # R-Car E2
- const: renesas,rcar-gen2-gpio # R-Car Gen2 or RZ/G1 - const: renesas,rcar-gen2-gpio # R-Car Gen2 or RZ/G1
- items: - items:
- enum: - enum:
- renesas,gpio-r8a774a1 # RZ/G2M - renesas,gpio-r8a774a1 # RZ/G2M
- renesas,gpio-r8a774b1 # RZ/G2N - renesas,gpio-r8a774b1 # RZ/G2N
- renesas,gpio-r8a774c0 # RZ/G2E - renesas,gpio-r8a774c0 # RZ/G2E
- renesas,gpio-r8a7795 # R-Car H3 - renesas,gpio-r8a7795 # R-Car H3
- renesas,gpio-r8a7796 # R-Car M3-W - renesas,gpio-r8a7796 # R-Car M3-W
- renesas,gpio-r8a77961 # R-Car M3-W+ - renesas,gpio-r8a77961 # R-Car M3-W+
- renesas,gpio-r8a77965 # R-Car M3-N - renesas,gpio-r8a77965 # R-Car M3-N
- renesas,gpio-r8a77970 # R-Car V3M - renesas,gpio-r8a77970 # R-Car V3M
- renesas,gpio-r8a77980 # R-Car V3H - renesas,gpio-r8a77980 # R-Car V3H
- renesas,gpio-r8a77990 # R-Car E3 - renesas,gpio-r8a77990 # R-Car E3
- renesas,gpio-r8a77995 # R-Car D3 - renesas,gpio-r8a77995 # R-Car D3
- const: renesas,rcar-gen3-gpio # R-Car Gen3 or RZ/G2 - const: renesas,rcar-gen3-gpio # R-Car Gen3 or RZ/G2
reg: reg:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/gpu/vivante,gc.yaml
View file @ f516fb70
...@@ -26,7 +26,8 @@ properties: ...@@ -26,7 +26,8 @@ properties:
- description: AXI/master interface clock - description: AXI/master interface clock
- description: GPU core clock - description: GPU core clock
- description: Shader clock (only required if GPU has feature PIPE_3D) - description: Shader clock (only required if GPU has feature PIPE_3D)
- description: AHB/slave interface clock (only required if GPU can gate slave interface independently) - description: AHB/slave interface clock (only required if GPU can gate
slave interface independently)
minItems: 1 minItems: 1
maxItems: 4 maxItems: 4
......
Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
View file @ f516fb70
...@@ -19,7 +19,7 @@ description: |+ ...@@ -19,7 +19,7 @@ description: |+
properties: properties:
compatible: compatible:
enum: enum:
- adi,axi-fan-control-1.00.a - adi,axi-fan-control-1.00.a
reg: reg:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/i2c/i2c-imx.yaml
View file @ f516fb70
...@@ -20,22 +20,22 @@ properties: ...@@ -20,22 +20,22 @@ properties:
- const: fsl,imx1-i2c - const: fsl,imx1-i2c
- items: - items:
- enum: - enum:
- fsl,imx25-i2c - fsl,imx25-i2c
- fsl,imx27-i2c - fsl,imx27-i2c
- fsl,imx31-i2c - fsl,imx31-i2c
- fsl,imx50-i2c - fsl,imx50-i2c
- fsl,imx51-i2c - fsl,imx51-i2c
- fsl,imx53-i2c - fsl,imx53-i2c
- fsl,imx6q-i2c - fsl,imx6q-i2c
- fsl,imx6sl-i2c - fsl,imx6sl-i2c
- fsl,imx6sx-i2c - fsl,imx6sx-i2c
- fsl,imx6sll-i2c - fsl,imx6sll-i2c
- fsl,imx6ul-i2c - fsl,imx6ul-i2c
- fsl,imx7s-i2c - fsl,imx7s-i2c
- fsl,imx8mq-i2c - fsl,imx8mq-i2c
- fsl,imx8mm-i2c - fsl,imx8mm-i2c
- fsl,imx8mn-i2c - fsl,imx8mn-i2c
- fsl,imx8mp-i2c - fsl,imx8mp-i2c
- const: fsl,imx21-i2c - const: fsl,imx21-i2c
reg: reg:
......
Documentation/devicetree/bindings/i2c/i2c-pxa.yaml
View file @ f516fb70
...@@ -16,8 +16,8 @@ allOf: ...@@ -16,8 +16,8 @@ allOf:
required: required:
- mrvl,i2c-polling - mrvl,i2c-polling
then: then:
required: required:
- interrupts - interrupts
properties: properties:
compatible: compatible:
......
Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
View file @ f516fb70
...@@ -53,10 +53,10 @@ properties: ...@@ -53,10 +53,10 @@ properties:
standby-gpios: standby-gpios:
description: description:
Must be the device tree identifier of the STBY pin. This pin is used Must be the device tree identifier of the STBY pin. This pin is used
to place the AD7606 into one of two power-down modes, Standby mode or to place the AD7606 into one of two power-down modes, Standby mode or
Shutdown mode. As the line is active low, it should be marked Shutdown mode. As the line is active low, it should be marked
GPIO_ACTIVE_LOW. GPIO_ACTIVE_LOW.
maxItems: 1 maxItems: 1
adi,first-data-gpios: adi,first-data-gpios:
......
Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml
View file @ f516fb70
...@@ -10,7 +10,7 @@ maintainers: ...@@ -10,7 +10,7 @@ maintainers:
- Jonathan Cameron <jic23@kernel.org> - Jonathan Cameron <jic23@kernel.org>
description: | description: |
Family of simple ADCs with i2c inteface and internal references. Family of simple ADCs with i2c inteface and internal references.
properties: properties:
compatible: compatible:
......
Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
View file @ f516fb70
...@@ -24,11 +24,11 @@ properties: ...@@ -24,11 +24,11 @@ properties:
- const: qcom,spmi-adc-rev2 - const: qcom,spmi-adc-rev2
- items: - items:
- enum: - enum:
- qcom,spmi-vadc - qcom,spmi-vadc
- qcom,spmi-adc5 - qcom,spmi-adc5
- qcom,spmi-adc-rev2 - qcom,spmi-adc-rev2
- qcom,spmi-adc7 - qcom,spmi-adc7
reg: reg:
description: VADC base address in the SPMI PMIC register map description: VADC base address in the SPMI PMIC register map
...@@ -101,12 +101,11 @@ patternProperties: ...@@ -101,12 +101,11 @@ patternProperties:
- $ref: /schemas/types.yaml#/definitions/uint32-array - $ref: /schemas/types.yaml#/definitions/uint32-array
oneOf: oneOf:
- items: - items:
- const: 1 - const: 1
- enum: [ 1, 3, 4, 6, 20, 8, 10 ] - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
- items: - items:
- const: 10 - const: 10
- const: 81 - const: 81
qcom,ratiometric: qcom,ratiometric:
description: | description: |
......
Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
View file @ f516fb70
...@@ -17,10 +17,10 @@ properties: ...@@ -17,10 +17,10 @@ properties:
- const: rockchip,rk3399-saradc - const: rockchip,rk3399-saradc
- items: - items:
- enum: - enum:
- rockchip,px30-saradc - rockchip,px30-saradc
- rockchip,rk3308-saradc - rockchip,rk3308-saradc
- rockchip,rk3328-saradc - rockchip,rk3328-saradc
- rockchip,rv1108-saradc - rockchip,rv1108-saradc
- const: rockchip,rk3399-saradc - const: rockchip,rk3399-saradc
reg: reg:
......
Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
View file @ f516fb70
...@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# ...@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: HMC425A 6-bit Digital Step Attenuator title: HMC425A 6-bit Digital Step Attenuator
maintainers: maintainers:
- Michael Hennerich <michael.hennerich@analog.com> - Michael Hennerich <michael.hennerich@analog.com>
- Beniamin Bia <beniamin.bia@analog.com> - Beniamin Bia <beniamin.bia@analog.com>
description: | description: |
Digital Step Attenuator IIO device with gpio interface. Digital Step Attenuator IIO device with gpio interface.
......
Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml
View file @ f516fb70
...@@ -31,10 +31,10 @@ properties: ...@@ -31,10 +31,10 @@ properties:
- atlas,co2-ezo - atlas,co2-ezo
reg: reg:
maxItems: 1 maxItems: 1
interrupts: interrupts:
maxItems: 1 maxItems: 1
required: required:
- compatible - compatible
......
Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
View file @ f516fb70
...@@ -61,17 +61,17 @@ properties: ...@@ -61,17 +61,17 @@ properties:
const: 0 const: 0
adi,range-microamp: adi,range-microamp:
description: Output range of the channel. description: Output range of the channel.
oneOf: oneOf:
- items: - items:
- const: 0 - const: 0
- const: 300000 - const: 300000
- items: - items:
- const: -60000 - const: -60000
- const: 0 - const: 0
- items: - items:
- const: -60000 - const: -60000
- const: 300000 - const: 300000
channel@1: channel@1:
description: Represents an external channel which are description: Represents an external channel which are
...@@ -84,10 +84,10 @@ properties: ...@@ -84,10 +84,10 @@ properties:
const: 1 const: 1
adi,range-microamp: adi,range-microamp:
description: Output range of the channel. description: Output range of the channel.
items: items:
- const: 0 - const: 0
- enum: [ 140000, 250000 ] - enum: [140000, 250000]
channel@2: channel@2:
description: Represents an external channel which are description: Represents an external channel which are
...@@ -100,10 +100,10 @@ properties: ...@@ -100,10 +100,10 @@ properties:
const: 2 const: 2
adi,range-microamp: adi,range-microamp:
description: Output range of the channel. description: Output range of the channel.
items: items:
- const: 0 - const: 0
- enum: [ 55000, 150000 ] - enum: [55000, 150000]
patternProperties: patternProperties:
"^channel@([3-5])$": "^channel@([3-5])$":
...@@ -116,19 +116,19 @@ patternProperties: ...@@ -116,19 +116,19 @@ patternProperties:
maximum: 5 maximum: 5
adi,range-microamp: adi,range-microamp:
description: Output range of the channel. description: Output range of the channel.
items: items:
- const: 0 - const: 0
- enum: [ 45000, 100000 ] - enum: [45000, 100000]
required: required:
- reg - reg
- channel@0 - channel@0
- channel@1 - channel@1
- channel@2 - channel@2
- channel@3 - channel@3
- channel@4 - channel@4
- channel@5 - channel@5
examples: examples:
- | - |
......
Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
View file @ f516fb70
...@@ -36,15 +36,15 @@ required: ...@@ -36,15 +36,15 @@ required:
additionalProperties: false additionalProperties: false
examples: examples:
- | - |
i2c { i2c {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
light-sensor@51 { light-sensor@51 {
compatible = "vishay,vcnl4200"; compatible = "vishay,vcnl4200";
reg = <0x51>; reg = <0x51>;
proximity-near-level = <220>; proximity-near-level = <220>;
}; };
}; };
... ...
Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
View file @ f516fb70
...@@ -13,15 +13,15 @@ properties: ...@@ -13,15 +13,15 @@ properties:
compatible: compatible:
oneOf: oneOf:
- enum: - enum:
- asahi-kasei,ak8975 - asahi-kasei,ak8975
- asahi-kasei,ak8963 - asahi-kasei,ak8963
- asahi-kasei,ak09911 - asahi-kasei,ak09911
- asahi-kasei,ak09912 - asahi-kasei,ak09912
- enum: - enum:
- ak8975 - ak8975
- ak8963 - ak8963
- ak09911 - ak09911
- ak09912 - ak09912
deprecated: true deprecated: true
reg: reg:
......
Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
View file @ f516fb70
...@@ -39,8 +39,8 @@ properties: ...@@ -39,8 +39,8 @@ properties:
description: description:
The driver current for the LED used in proximity sensing. The driver current for the LED used in proximity sensing.
enum: [0, 10000, 20000, 30000, 40000, 50000, 60000, 70000, 80000, 90000, enum: [0, 10000, 20000, 30000, 40000, 50000, 60000, 70000, 80000, 90000,
100000, 110000, 120000, 130000, 140000, 150000, 160000, 170000, 100000, 110000, 120000, 130000, 140000, 150000, 160000, 170000,
180000, 190000, 200000] 180000, 190000, 200000]
default: 20000 default: 20000
required: required:
......
Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
View file @ f516fb70
...@@ -307,7 +307,7 @@ patternProperties: ...@@ -307,7 +307,7 @@ patternProperties:
mode. mode.
$ref: /schemas/types.yaml#/definitions/uint32 $ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000, enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000,
500000, 1000000] 500000, 1000000]
adi,custom-thermistor: adi,custom-thermistor:
description: description:
......
Documentation/devicetree/bindings/input/imx-keypad.yaml
View file @ f516fb70
...@@ -24,19 +24,19 @@ properties: ...@@ -24,19 +24,19 @@ properties:
- const: fsl,imx21-kpp - const: fsl,imx21-kpp
- items: - items:
- enum: - enum:
- fsl,imx25-kpp - fsl,imx25-kpp
- fsl,imx27-kpp - fsl,imx27-kpp
- fsl,imx31-kpp - fsl,imx31-kpp
- fsl,imx35-kpp - fsl,imx35-kpp
- fsl,imx51-kpp - fsl,imx51-kpp
- fsl,imx53-kpp - fsl,imx53-kpp
- fsl,imx50-kpp - fsl,imx50-kpp
- fsl,imx6q-kpp - fsl,imx6q-kpp
- fsl,imx6sx-kpp - fsl,imx6sx-kpp
- fsl,imx6sl-kpp - fsl,imx6sl-kpp
- fsl,imx6sll-kpp - fsl,imx6sll-kpp
- fsl,imx6ul-kpp - fsl,imx6ul-kpp
- fsl,imx7d-kpp - fsl,imx7d-kpp
- const: fsl,imx21-kpp - const: fsl,imx21-kpp
reg: reg:
......
Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml
View file @ f516fb70
...@@ -51,7 +51,7 @@ required: ...@@ -51,7 +51,7 @@ required:
- touchscreen-max-pressure - touchscreen-max-pressure
examples: examples:
- | - |
#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/irq.h>
i2c { i2c {
#address-cells = <1>; #address-cells = <1>;
......
Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
View file @ f516fb70
...@@ -20,11 +20,11 @@ maintainers: ...@@ -20,11 +20,11 @@ maintainers:
allOf: allOf:
- $ref: touchscreen.yaml# - $ref: touchscreen.yaml#
- if: - if:
properties: properties:
compatible: compatible:
contains: contains:
enum: enum:
- evervision,ev-ft5726 - evervision,ev-ft5726
then: then:
properties: properties:
......
Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
View file @ f516fb70
...@@ -35,9 +35,8 @@ properties: ...@@ -35,9 +35,8 @@ properties:
maxItems: 1 maxItems: 1
irq-gpios: irq-gpios:
description: GPIO pin used for IRQ. description: GPIO pin used for IRQ. The driver uses the interrupt gpio pin
The driver uses the interrupt gpio pin as as output to reset the device.
output to reset the device.
maxItems: 1 maxItems: 1
reset-gpios: reset-gpios:
......
Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
View file @ f516fb70
...@@ -33,8 +33,8 @@ properties: ...@@ -33,8 +33,8 @@ properties:
$ref: /schemas/types.yaml#/definitions/uint32 $ref: /schemas/types.yaml#/definitions/uint32
touchscreen-min-pressure: touchscreen-min-pressure:
description: minimum pressure on the touchscreen to be achieved in order for the description: minimum pressure on the touchscreen to be achieved in order
touchscreen driver to report a touch event. for the touchscreen driver to report a touch event.
$ref: /schemas/types.yaml#/definitions/uint32 $ref: /schemas/types.yaml#/definitions/uint32
touchscreen-fuzz-x: touchscreen-fuzz-x:
...@@ -46,13 +46,13 @@ properties: ...@@ -46,13 +46,13 @@ properties:
$ref: /schemas/types.yaml#/definitions/uint32 $ref: /schemas/types.yaml#/definitions/uint32
touchscreen-fuzz-pressure: touchscreen-fuzz-pressure:
description: pressure noise value of the absolute input device (arbitrary range description: pressure noise value of the absolute input device (arbitrary
dependent on the controller) range dependent on the controller)
$ref: /schemas/types.yaml#/definitions/uint32 $ref: /schemas/types.yaml#/definitions/uint32
touchscreen-average-samples: touchscreen-average-samples:
description: Number of data samples which are averaged for each read (valid values description: Number of data samples which are averaged for each read (valid
dependent on the controller) values dependent on the controller)
$ref: /schemas/types.yaml#/definitions/uint32 $ref: /schemas/types.yaml#/definitions/uint32
touchscreen-inverted-x: touchscreen-inverted-x:
......
Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
View file @ f516fb70
...@@ -25,17 +25,17 @@ properties: ...@@ -25,17 +25,17 @@ properties:
compatible: compatible:
oneOf: oneOf:
- items: - items:
- enum: - enum:
- fsl,imx8mn-nic - fsl,imx8mn-nic
- fsl,imx8mm-nic - fsl,imx8mm-nic
- fsl,imx8mq-nic - fsl,imx8mq-nic
- const: fsl,imx8m-nic - const: fsl,imx8m-nic
- items: - items:
- enum: - enum:
- fsl,imx8mn-noc - fsl,imx8mn-noc
- fsl,imx8mm-noc - fsl,imx8mm-noc
- fsl,imx8mq-noc - fsl,imx8mq-noc
- const: fsl,imx8m-noc - const: fsl,imx8m-noc
- const: fsl,imx8m-nic - const: fsl,imx8m-nic
reg: reg:
......
Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml
View file @ f516fb70
...@@ -4,7 +4,7 @@ ...@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/interconnect/qcom,sc7180.yaml# $id: http://devicetree.org/schemas/interconnect/qcom,sc7180.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm SC7180 Network-On-Chip Interconnect title: Qualcomm SC7180 Network-On-Chip Interconnect
maintainers: maintainers:
- Odelu Kukatla <okukatla@codeaurora.org> - Odelu Kukatla <okukatla@codeaurora.org>
......
Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml
View file @ f516fb70
...@@ -4,7 +4,7 @@ ...@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/interconnect/qcom,sdm845.yaml# $id: http://devicetree.org/schemas/interconnect/qcom,sdm845.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm SDM845 Network-On-Chip Interconnect title: Qualcomm SDM845 Network-On-Chip Interconnect
maintainers: maintainers:
- Georgi Djakov <georgi.djakov@linaro.org> - Georgi Djakov <georgi.djakov@linaro.org>
......
Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
View file @ f516fb70
...@@ -42,8 +42,8 @@ properties: ...@@ -42,8 +42,8 @@ properties:
- items: - items:
- const: arm,gic-400 - const: arm,gic-400
- enum: - enum:
- arm,cortex-a15-gic - arm,cortex-a15-gic
- arm,cortex-a7-gic - arm,cortex-a7-gic
- items: - items:
- const: arm,arm1176jzf-devchip-gic - const: arm,arm1176jzf-devchip-gic
......
Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml
View file @ f516fb70
...@@ -16,20 +16,20 @@ properties: ...@@ -16,20 +16,20 @@ properties:
compatible: compatible:
oneOf: oneOf:
- enum: - enum:
- ingenic,jz4740-intc - ingenic,jz4740-intc
- ingenic,jz4760-intc - ingenic,jz4760-intc
- ingenic,jz4780-intc - ingenic,jz4780-intc
- items: - items:
- enum: - enum:
- ingenic,jz4775-intc - ingenic,jz4775-intc
- ingenic,jz4770-intc - ingenic,jz4770-intc
- const: ingenic,jz4760-intc - const: ingenic,jz4760-intc
- items: - items:
- const: ingenic,x1000-intc - const: ingenic,x1000-intc
- const: ingenic,jz4780-intc - const: ingenic,jz4780-intc
- items: - items:
- const: ingenic,jz4725b-intc - const: ingenic,jz4725b-intc
- const: ingenic,jz4740-intc - const: ingenic,jz4740-intc
"#interrupt-cells": "#interrupt-cells":
const: 1 const: 1
......
Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
View file @ f516fb70
...@@ -79,7 +79,8 @@ properties: ...@@ -79,7 +79,8 @@ properties:
description: | description: |
kHz; switching frequency. kHz; switching frequency.
$ref: /schemas/types.yaml#/definitions/uint32 $ref: /schemas/types.yaml#/definitions/uint32
enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ] enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920,
2400, 3200, 4800, 9600 ]
qcom,ovp: qcom,ovp:
description: | description: |
......
Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
View file @ f516fb70
...@@ -29,12 +29,12 @@ properties: ...@@ -29,12 +29,12 @@ properties:
- const: fsl,imx8-mu-scu - const: fsl,imx8-mu-scu
- items: - items:
- enum: - enum:
- fsl,imx7s-mu - fsl,imx7s-mu
- fsl,imx8mq-mu - fsl,imx8mq-mu
- fsl,imx8mm-mu - fsl,imx8mm-mu
- fsl,imx8mn-mu - fsl,imx8mn-mu
- fsl,imx8mp-mu - fsl,imx8mp-mu
- fsl,imx8qxp-mu - fsl,imx8qxp-mu
- const: fsl,imx6sx-mu - const: fsl,imx6sx-mu
- description: To communicate with i.MX8 SCU with fast IPC - description: To communicate with i.MX8 SCU with fast IPC
items: items:
......
Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
View file @ f516fb70
...@@ -24,7 +24,7 @@ properties: ...@@ -24,7 +24,7 @@ properties:
compatible: compatible:
items: items:
- enum: - enum:
- qcom,sm8250-ipcc - qcom,sm8250-ipcc
- const: qcom,ipcc - const: qcom,ipcc
reg: reg:
......
Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
View file @ f516fb70
...@@ -20,8 +20,8 @@ properties: ...@@ -20,8 +20,8 @@ properties:
oneOf: oneOf:
- const: allwinner,sun8i-a83t-de2-rotate - const: allwinner,sun8i-a83t-de2-rotate
- items: - items:
- const: allwinner,sun50i-a64-de2-rotate - const: allwinner,sun50i-a64-de2-rotate
- const: allwinner,sun8i-a83t-de2-rotate - const: allwinner,sun8i-a83t-de2-rotate
reg: reg:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
View file @ f516fb70
...@@ -20,8 +20,8 @@ properties: ...@@ -20,8 +20,8 @@ properties:
oneOf: oneOf:
- const: allwinner,sun8i-h3-deinterlace - const: allwinner,sun8i-h3-deinterlace
- items: - items:
- const: allwinner,sun50i-a64-deinterlace - const: allwinner,sun50i-a64-deinterlace
- const: allwinner,sun8i-h3-deinterlace - const: allwinner,sun8i-h3-deinterlace
reg: reg:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/media/i2c/adv7180.yaml
View file @ f516fb70
...@@ -17,17 +17,17 @@ properties: ...@@ -17,17 +17,17 @@ properties:
compatible: compatible:
items: items:
- enum: - enum:
- adi,adv7180 - adi,adv7180
- adi,adv7180cp - adi,adv7180cp
- adi,adv7180st - adi,adv7180st
- adi,adv7182 - adi,adv7182
- adi,adv7280 - adi,adv7280
- adi,adv7280-m - adi,adv7280-m
- adi,adv7281 - adi,adv7281
- adi,adv7281-m - adi,adv7281-m
- adi,adv7281-ma - adi,adv7281-ma
- adi,adv7282 - adi,adv7282
- adi,adv7282-m - adi,adv7282-m
reg: reg:
maxItems: 1 maxItems: 1
...@@ -58,17 +58,16 @@ allOf: ...@@ -58,17 +58,16 @@ allOf:
- if: - if:
properties: properties:
compatible: compatible:
items: enum:
- enum: - adi,adv7180
- adi,adv7180 - adi,adv7182
- adi,adv7182 - adi,adv7280
- adi,adv7280 - adi,adv7280-m
- adi,adv7280-m - adi,adv7281
- adi,adv7281 - adi,adv7281-m
- adi,adv7281-m - adi,adv7281-ma
- adi,adv7281-ma - adi,adv7282
- adi,adv7282 - adi,adv7282-m
- adi,adv7282-m
then: then:
required: required:
- port - port
......
Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml
View file @ f516fb70
...@@ -5,7 +5,7 @@ ...@@ -5,7 +5,7 @@
$id: http://devicetree.org/schemas/media/i2c/imi,rdacm2x-gmsl.yaml# $id: http://devicetree.org/schemas/media/i2c/imi,rdacm2x-gmsl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml#
title: IMI D&D RDACM20 and RDACM21 Automotive Camera Platforms title: IMI D&D RDACM20 and RDACM21 Automotive Camera Platforms
maintainers: maintainers:
- Jacopo Mondi <jacopo+renesas@jmondi.org> - Jacopo Mondi <jacopo+renesas@jmondi.org>
......
Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
View file @ f516fb70
...@@ -49,7 +49,7 @@ properties: ...@@ -49,7 +49,7 @@ properties:
gpio-controller: true gpio-controller: true
'#gpio-cells': '#gpio-cells':
const: 2 const: 2
ports: ports:
type: object type: object
......
Documentation/devicetree/bindings/media/i2c/ov8856.yaml
View file @ f516fb70
...@@ -138,4 +138,5 @@ examples: ...@@ -138,4 +138,5 @@ examples:
}; };
}; };
}; };
... ...
\ No newline at end of file
Documentation/devicetree/bindings/media/renesas,csi2.yaml
View file @ f516fb70
...@@ -19,15 +19,15 @@ properties: ...@@ -19,15 +19,15 @@ properties:
compatible: compatible:
items: items:
- enum: - enum:
- renesas,r8a774a1-csi2 # RZ/G2M - renesas,r8a774a1-csi2 # RZ/G2M
- renesas,r8a774b1-csi2 # RZ/G2N - renesas,r8a774b1-csi2 # RZ/G2N
- renesas,r8a774c0-csi2 # RZ/G2E - renesas,r8a774c0-csi2 # RZ/G2E
- renesas,r8a7795-csi2 # R-Car H3 - renesas,r8a7795-csi2 # R-Car H3
- renesas,r8a7796-csi2 # R-Car M3-W - renesas,r8a7796-csi2 # R-Car M3-W
- renesas,r8a77965-csi2 # R-Car M3-N - renesas,r8a77965-csi2 # R-Car M3-N
- renesas,r8a77970-csi2 # R-Car V3M - renesas,r8a77970-csi2 # R-Car V3M
- renesas,r8a77980-csi2 # R-Car V3H - renesas,r8a77980-csi2 # R-Car V3H
- renesas,r8a77990-csi2 # R-Car E3 - renesas,r8a77990-csi2 # R-Car E3
reg: reg:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/media/rockchip-vpu.yaml
View file @ f516fb70
...@@ -31,8 +31,8 @@ properties: ...@@ -31,8 +31,8 @@ properties:
oneOf: oneOf:
- const: vdpu - const: vdpu
- items: - items:
- const: vepu - const: vepu
- const: vdpu - const: vdpu
clocks: clocks:
maxItems: 2 maxItems: 2
......
Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
View file @ f516fb70
...@@ -25,7 +25,7 @@ properties: ...@@ -25,7 +25,7 @@ properties:
compatible: compatible:
items: items:
- enum: - enum:
- xlnx,mipi-csi2-rx-subsystem-5.0 - xlnx,mipi-csi2-rx-subsystem-5.0
reg: reg:
maxItems: 1 maxItems: 1
...@@ -65,13 +65,12 @@ properties: ...@@ -65,13 +65,12 @@ properties:
0x2d - RAW14 0x2d - RAW14
0x2e - RAW16 0x2e - RAW16
0x2f - RAW20 0x2f - RAW20
allOf: $ref: /schemas/types.yaml#/definitions/uint32
- $ref: /schemas/types.yaml#/definitions/uint32 oneOf:
- anyOf: - minimum: 0x1e
- minimum: 0x1e maximum: 0x24
- maximum: 0x24 - minimum: 0x28
- minimum: 0x28 maximum: 0x2f
- maximum: 0x2f
xlnx,vfb: xlnx,vfb:
type: boolean type: boolean
......
Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml
View file @ f516fb70
...@@ -15,12 +15,12 @@ properties: ...@@ -15,12 +15,12 @@ properties:
- const: fsl,imx6q-mmdc - const: fsl,imx6q-mmdc
- items: - items:
- enum: - enum:
- fsl,imx6qp-mmdc - fsl,imx6qp-mmdc
- fsl,imx6sl-mmdc - fsl,imx6sl-mmdc
- fsl,imx6sll-mmdc - fsl,imx6sll-mmdc
- fsl,imx6sx-mmdc - fsl,imx6sx-mmdc
- fsl,imx6ul-mmdc - fsl,imx6ul-mmdc
- fsl,imx7ulp-mmdc - fsl,imx7ulp-mmdc
- const: fsl,imx6q-mmdc - const: fsl,imx6q-mmdc
reg: reg:
......
Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
View file @ f516fb70
...@@ -16,11 +16,11 @@ properties: ...@@ -16,11 +16,11 @@ properties:
compatible: compatible:
oneOf: oneOf:
- enum: - enum:
- ingenic,jz4740-nemc - ingenic,jz4740-nemc
- ingenic,jz4780-nemc - ingenic,jz4780-nemc
- items: - items:
- const: ingenic,jz4725b-nemc - const: ingenic,jz4725b-nemc
- const: ingenic,jz4740-nemc - const: ingenic,jz4740-nemc
"#address-cells": "#address-cells":
const: 2 const: 2
......
Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
View file @ f516fb70
...@@ -26,10 +26,10 @@ properties: ...@@ -26,10 +26,10 @@ properties:
compatible: compatible:
items: items:
- enum: - enum:
- renesas,r8a77970-rpc-if # R-Car V3M - renesas,r8a77970-rpc-if # R-Car V3M
- renesas,r8a77980-rpc-if # R-Car V3H - renesas,r8a77980-rpc-if # R-Car V3H
- renesas,r8a77995-rpc-if # R-Car D3 - renesas,r8a77995-rpc-if # R-Car D3
- const: renesas,rcar-gen3-rpc-if # a generic R-Car gen3 device - const: renesas,rcar-gen3-rpc-if # a generic R-Car gen3 device
reg: reg:
items: items:
......
Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
View file @ f516fb70
...@@ -98,11 +98,11 @@ allOf: ...@@ -98,11 +98,11 @@ allOf:
description: description:
Databus power supply. Databus power supply.
- if: - if:
properties: properties:
compatible: compatible:
contains: contains:
enum: enum:
- cirrus,cs47l15 - cirrus,cs47l15
then: then:
required: required:
- MICVDD-supply - MICVDD-supply
...@@ -174,24 +174,24 @@ properties: ...@@ -174,24 +174,24 @@ properties:
"mclk3" For the clock supplied on MCLK3. "mclk3" For the clock supplied on MCLK3.
oneOf: oneOf:
- items: - items:
- const: mclk1 - const: mclk1
- items: - items:
- const: mclk2 - const: mclk2
- items: - items:
- const: mclk3 - const: mclk3
- items: - items:
- const: mclk1 - const: mclk1
- const: mclk2 - const: mclk2
- items: - items:
- const: mclk1 - const: mclk1
- const: mclk3 - const: mclk3
- items: - items:
- const: mclk2 - const: mclk2
- const: mclk3 - const: mclk3
- items: - items:
- const: mclk1 - const: mclk1
- const: mclk2 - const: mclk2
- const: mclk3 - const: mclk3
AVDD-supply: AVDD-supply:
description: description:
......
Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
View file @ f516fb70
...@@ -89,8 +89,8 @@ properties: ...@@ -89,8 +89,8 @@ properties:
description: Values of resistors for divider on raw ADC input description: Values of resistors for divider on raw ADC input
maxItems: 2 maxItems: 2
items: items:
minimum: 1000 minimum: 1000
maximum: 1000000 maximum: 1000000
gw,voltage-offset-microvolt: gw,voltage-offset-microvolt:
description: | description: |
......
Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
View file @ f516fb70
...@@ -113,8 +113,8 @@ properties: ...@@ -113,8 +113,8 @@ properties:
maxItems: 1 maxItems: 1
st,mask-reset: st,mask-reset:
description: mask reset for this regulator, description: mask reset for this regulator, the regulator configuration
the regulator configuration is maintained during pmic reset. is maintained during pmic reset.
$ref: /schemas/types.yaml#/definitions/flag $ref: /schemas/types.yaml#/definitions/flag
regulator-name: true regulator-name: true
...@@ -135,8 +135,8 @@ properties: ...@@ -135,8 +135,8 @@ properties:
maxItems: 1 maxItems: 1
st,mask-reset: st,mask-reset:
description: mask reset for this regulator, description: mask reset for this regulator, the regulator configuration
the regulator configuration is maintained during pmic reset. is maintained during pmic reset.
$ref: /schemas/types.yaml#/definitions/flag $ref: /schemas/types.yaml#/definitions/flag
regulator-name: true regulator-name: true
...@@ -154,8 +154,8 @@ properties: ...@@ -154,8 +154,8 @@ properties:
maxItems: 1 maxItems: 1
st,mask-reset: st,mask-reset:
description: mask reset for this regulator, description: mask reset for this regulator, the regulator configuration
the regulator configuration is maintained during pmic reset. is maintained during pmic reset.
$ref: /schemas/types.yaml#/definitions/flag $ref: /schemas/types.yaml#/definitions/flag
regulator-name: true regulator-name: true
...@@ -172,8 +172,8 @@ properties: ...@@ -172,8 +172,8 @@ properties:
maxItems: 1 maxItems: 1
st,mask-reset: st,mask-reset:
description: mask reset for this regulator, description: mask reset for this regulator, the regulator configuration
the regulator configuration is maintained during pmic reset. is maintained during pmic reset.
$ref: /schemas/types.yaml#/definitions/flag $ref: /schemas/types.yaml#/definitions/flag
regulator-name: true regulator-name: true
...@@ -198,8 +198,8 @@ properties: ...@@ -198,8 +198,8 @@ properties:
maxItems: 1 maxItems: 1
st,mask-reset: st,mask-reset:
description: mask reset for this regulator, description: mask reset for this regulator, the regulator configuration
the regulator configuration is maintained during pmic reset. is maintained during pmic reset.
$ref: /schemas/types.yaml#/definitions/flag $ref: /schemas/types.yaml#/definitions/flag
regulator-name: true regulator-name: true
...@@ -220,8 +220,8 @@ properties: ...@@ -220,8 +220,8 @@ properties:
maxItems: 1 maxItems: 1
st,mask-reset: st,mask-reset:
description: mask reset for this regulator, description: mask reset for this regulator, the regulator configuration
the regulator configuration is maintained during pmic reset. is maintained during pmic reset.
$ref: /schemas/types.yaml#/definitions/flag $ref: /schemas/types.yaml#/definitions/flag
regulator-name: true regulator-name: true
......
Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
View file @ f516fb70
...@@ -24,12 +24,11 @@ maintainers: ...@@ -24,12 +24,11 @@ maintainers:
properties: properties:
compatible: compatible:
anyOf: items:
- items: - enum:
- enum: - ti,j721e-system-controller
- ti,j721e-system-controller - const: syscon
- const: syscon - const: simple-mfd
- const: simple-mfd
"#address-cells": "#address-cells":
const: 1 const: 1
......
Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
View file @ f516fb70
...@@ -73,13 +73,13 @@ allOf: ...@@ -73,13 +73,13 @@ allOf:
required: required:
- DBVDD3-supply - DBVDD3-supply
- if: - if:
properties: properties:
compatible: compatible:
contains: contains:
enum: enum:
- cirrus,cs47l24 - cirrus,cs47l24
- wlf,wm1831 - wlf,wm1831
- wlf,wm8997 - wlf,wm8997
then: then:
properties: properties:
SPKVDD-supply: SPKVDD-supply:
...@@ -183,12 +183,12 @@ properties: ...@@ -183,12 +183,12 @@ properties:
clock supplied on MCLK2, recommended to be an always on 32k clock. clock supplied on MCLK2, recommended to be an always on 32k clock.
oneOf: oneOf:
- items: - items:
- const: mclk1 - const: mclk1
- items: - items:
- const: mclk2 - const: mclk2
- items: - items:
- const: mclk1 - const: mclk1
- const: mclk2 - const: mclk2
reset-gpios: reset-gpios:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
View file @ f516fb70
...@@ -21,9 +21,9 @@ properties: ...@@ -21,9 +21,9 @@ properties:
compatible: compatible:
items: items:
- enum: - enum:
- amlogic,meson8-sdhc - amlogic,meson8-sdhc
- amlogic,meson8b-sdhc - amlogic,meson8b-sdhc
- amlogic,meson8m2-sdhc - amlogic,meson8m2-sdhc
- const: amlogic,meson-mx-sdhc - const: amlogic,meson-mx-sdhc
reg: reg:
......
Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml
View file @ f516fb70
...@@ -16,14 +16,14 @@ properties: ...@@ -16,14 +16,14 @@ properties:
compatible: compatible:
oneOf: oneOf:
- enum: - enum:
- ingenic,jz4740-mmc - ingenic,jz4740-mmc
- ingenic,jz4725b-mmc - ingenic,jz4725b-mmc
- ingenic,jz4760-mmc - ingenic,jz4760-mmc
- ingenic,jz4780-mmc - ingenic,jz4780-mmc
- ingenic,x1000-mmc - ingenic,x1000-mmc
- items: - items:
- const: ingenic,jz4770-mmc - const: ingenic,jz4770-mmc
- const: ingenic,jz4760-mmc - const: ingenic,jz4760-mmc
reg: reg:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
View file @ f516fb70
...@@ -130,9 +130,9 @@ then: ...@@ -130,9 +130,9 @@ then:
required: required:
- clock-names - clock-names
description: description:
The internal card detection logic that exists in these controllers is The internal card detection logic that exists in these controllers is
sectioned off to be run by a separate second clock source to allow sectioned off to be run by a separate second clock source to allow
the main core clock to be turned off to save power. the main core clock to be turned off to save power.
unevaluatedProperties: false unevaluatedProperties: false
......
Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml
View file @ f516fb70
...@@ -14,12 +14,10 @@ maintainers: ...@@ -14,12 +14,10 @@ maintainers:
properties: properties:
compatible: compatible:
oneOf: items:
- items: - enum:
- enum:
- xlnx,zynqmp-nand-controller - xlnx,zynqmp-nand-controller
- enum: - const: arasan,nfc-v3p10
- arasan,nfc-v3p10
reg: reg:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
View file @ f516fb70
...@@ -4,7 +4,7 @@ ...@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml# $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Freescale General-Purpose Media Interface (GPMI) binding title: Freescale General-Purpose Media Interface (GPMI) binding
maintainers: maintainers:
- Han Xu <han.xu@nxp.com> - Han Xu <han.xu@nxp.com>
......
Documentation/devicetree/bindings/mtd/mxc-nand.yaml
View file @ f516fb70
...@@ -4,7 +4,7 @@ ...@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/mtd/mxc-nand.yaml# $id: http://devicetree.org/schemas/mtd/mxc-nand.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Freescale's mxc_nand binding title: Freescale's mxc_nand binding
maintainers: maintainers:
- Uwe Kleine-König <u.kleine-koenig@pengutronix.de> - Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
......
Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
View file @ f516fb70
...@@ -42,7 +42,7 @@ patternProperties: ...@@ -42,7 +42,7 @@ patternProperties:
const: 512 const: 512
nand-ecc-strength: nand-ecc-strength:
enum: [1, 4 ,8 ] enum: [1, 4, 8]
allOf: allOf:
- $ref: "nand-controller.yaml#" - $ref: "nand-controller.yaml#"
......
Documentation/devicetree/bindings/net/dsa/dsa.yaml
View file @ f516fb70
...@@ -85,8 +85,8 @@ patternProperties: ...@@ -85,8 +85,8 @@ patternProperties:
oneOf: oneOf:
- required: - required:
- ports - ports
- required: - required:
- ethernet-ports - ethernet-ports
... ...
Documentation/devicetree/bindings/net/qcom,ipa.yaml
View file @ f516fb70
...@@ -43,7 +43,7 @@ description: ...@@ -43,7 +43,7 @@ description:
properties: properties:
compatible: compatible:
const: "qcom,sdm845-ipa" const: "qcom,sdm845-ipa"
reg: reg:
items: items:
...@@ -64,7 +64,7 @@ properties: ...@@ -64,7 +64,7 @@ properties:
maxItems: 1 maxItems: 1
clock-names: clock-names:
const: core const: core
interrupts: interrupts:
items: items:
...@@ -96,8 +96,8 @@ properties: ...@@ -96,8 +96,8 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array $ref: /schemas/types.yaml#/definitions/phandle-array
description: State bits used in by the AP to signal the modem. description: State bits used in by the AP to signal the modem.
items: items:
- description: Whether the "ipa-clock-enabled" state bit is valid - description: Whether the "ipa-clock-enabled" state bit is valid
- description: Whether the IPA clock is enabled (if valid) - description: Whether the IPA clock is enabled (if valid)
qcom,smem-state-names: qcom,smem-state-names:
$ref: /schemas/types.yaml#/definitions/string-array $ref: /schemas/types.yaml#/definitions/string-array
...@@ -140,9 +140,9 @@ required: ...@@ -140,9 +140,9 @@ required:
oneOf: oneOf:
- required: - required:
- modem-init - modem-init
- required: - required:
- memory-region - memory-region
examples: examples:
- | - |
......
Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
View file @ f516fb70
...@@ -46,10 +46,10 @@ properties: ...@@ -46,10 +46,10 @@ properties:
clock-names: clock-names:
oneOf: oneOf:
- items: # for Pro4 - items: # for Pro4
- const: gio - const: gio
- const: ether - const: ether
- const: ether-gb - const: ether-gb
- const: ether-phy - const: ether-phy
- const: ether # for others - const: ether # for others
resets: resets:
...@@ -59,8 +59,8 @@ properties: ...@@ -59,8 +59,8 @@ properties:
reset-names: reset-names:
oneOf: oneOf:
- items: # for Pro4 - items: # for Pro4
- const: gio - const: gio
- const: ether - const: ether
- const: ether # for others - const: ether # for others
socionext,syscon-phy-mode: socionext,syscon-phy-mode:
......
Documentation/devicetree/bindings/net/stm32-dwmac.yaml
View file @ f516fb70
...@@ -48,11 +48,11 @@ properties: ...@@ -48,11 +48,11 @@ properties:
minItems: 3 minItems: 3
maxItems: 5 maxItems: 5
items: items:
- description: GMAC main clock - description: GMAC main clock
- description: MAC TX clock - description: MAC TX clock
- description: MAC RX clock - description: MAC RX clock
- description: For MPU family, used for power mode - description: For MPU family, used for power mode
- description: For MPU family, used for PHY without quartz - description: For MPU family, used for PHY without quartz
clock-names: clock-names:
minItems: 3 minItems: 3
...@@ -89,7 +89,7 @@ required: ...@@ -89,7 +89,7 @@ required:
- st,syscon - st,syscon
examples: examples:
- | - |
#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/stm32mp1-clks.h> #include <dt-bindings/clock/stm32mp1-clks.h>
#include <dt-bindings/reset/stm32mp1-resets.h> #include <dt-bindings/reset/stm32mp1-resets.h>
......
Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
View file @ f516fb70
...@@ -35,7 +35,7 @@ properties: ...@@ -35,7 +35,7 @@ properties:
reg: reg:
maxItems: 1 maxItems: 1
description: description:
The physical base address and size of full the CPSW module IO range The physical base address and size of full the CPSW module IO range
'#address-cells': '#address-cells':
const: 1 const: 1
...@@ -85,36 +85,36 @@ properties: ...@@ -85,36 +85,36 @@ properties:
patternProperties: patternProperties:
"^port@[0-9]+$": "^port@[0-9]+$":
type: object type: object
description: CPSW external ports description: CPSW external ports
allOf: allOf:
- $ref: ethernet-controller.yaml# - $ref: ethernet-controller.yaml#
properties: properties:
reg: reg:
items: items:
- enum: [1, 2] - enum: [1, 2]
description: CPSW port number description: CPSW port number
phys: phys:
maxItems: 1 maxItems: 1
description: phandle on phy-gmii-sel PHY description: phandle on phy-gmii-sel PHY
label: label:
description: label associated with this port description: label associated with this port
ti,dual-emac-pvid: ti,dual-emac-pvid:
$ref: /schemas/types.yaml#/definitions/uint32 $ref: /schemas/types.yaml#/definitions/uint32
minimum: 1 minimum: 1
maximum: 1024 maximum: 1024
description: description:
Specifies default PORT VID to be used to segregate Specifies default PORT VID to be used to segregate
ports. Default value - CPSW port number. ports. Default value - CPSW port number.
required: required:
- reg - reg
- phys - phys
cpts: cpts:
type: object type: object
......
Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
View file @ f516fb70
...@@ -55,7 +55,7 @@ properties: ...@@ -55,7 +55,7 @@ properties:
reg: reg:
maxItems: 1 maxItems: 1
description: description:
The physical base address and size of full the CPSW2G NUSS IO range The physical base address and size of full the CPSW2G NUSS IO range
reg-names: reg-names:
items: items:
...@@ -100,38 +100,38 @@ properties: ...@@ -100,38 +100,38 @@ properties:
patternProperties: patternProperties:
port@1: port@1:
type: object type: object
description: CPSW2G NUSS external ports description: CPSW2G NUSS external ports
$ref: ethernet-controller.yaml# $ref: ethernet-controller.yaml#
properties: properties:
reg: reg:
items: items:
- const: 1 - const: 1
description: CPSW port number description: CPSW port number
phys: phys:
maxItems: 1 maxItems: 1
description: phandle on phy-gmii-sel PHY description: phandle on phy-gmii-sel PHY
label: label:
description: label associated with this port description: label associated with this port
ti,mac-only: ti,mac-only:
$ref: /schemas/types.yaml#definitions/flag $ref: /schemas/types.yaml#definitions/flag
description: description:
Specifies the port works in mac-only mode. Specifies the port works in mac-only mode.
ti,syscon-efuse: ti,syscon-efuse:
$ref: /schemas/types.yaml#definitions/phandle-array $ref: /schemas/types.yaml#definitions/phandle-array
description: description:
Phandle to the system control device node which provides access Phandle to the system control device node which provides access
to efuse IO range with MAC addresses to efuse IO range with MAC addresses
required: required:
- reg - reg
- phys - phys
additionalProperties: false additionalProperties: false
......
Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
View file @ f516fb70
...@@ -21,18 +21,18 @@ properties: ...@@ -21,18 +21,18 @@ properties:
compatible: compatible:
items: items:
- enum: - enum:
- fsl,imx6q-ocotp - fsl,imx6q-ocotp
- fsl,imx6sl-ocotp - fsl,imx6sl-ocotp
- fsl,imx6sx-ocotp - fsl,imx6sx-ocotp
- fsl,imx6ul-ocotp - fsl,imx6ul-ocotp
- fsl,imx6ull-ocotp - fsl,imx6ull-ocotp
- fsl,imx7d-ocotp - fsl,imx7d-ocotp
- fsl,imx6sll-ocotp - fsl,imx6sll-ocotp
- fsl,imx7ulp-ocotp - fsl,imx7ulp-ocotp
- fsl,imx8mq-ocotp - fsl,imx8mq-ocotp
- fsl,imx8mm-ocotp - fsl,imx8mm-ocotp
- fsl,imx8mn-ocotp - fsl,imx8mn-ocotp
- fsl,imx8mp-ocotp - fsl,imx8mp-ocotp
- const: syscon - const: syscon
reg: reg:
......
Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
View file @ f516fb70
...@@ -46,8 +46,8 @@ properties: ...@@ -46,8 +46,8 @@ properties:
const: 1 const: 1
required: required:
- compatible - compatible
- reg - reg
examples: examples:
- | - |
......
Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
View file @ f516fb70
...@@ -37,9 +37,9 @@ properties: ...@@ -37,9 +37,9 @@ properties:
const: 0 const: 0
phy-supply: phy-supply:
description: description:
Phandle to a regulator that provides power to the PHY. This Phandle to a regulator that provides power to the PHY. This
regulator will be managed during the PHY power on/off sequence. regulator will be managed during the PHY power on/off sequence.
required: required:
- compatible - compatible
......
Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
View file @ f516fb70
...@@ -100,9 +100,9 @@ properties: ...@@ -100,9 +100,9 @@ properties:
- const: linestate - const: linestate
- const: otg-mux - const: otg-mux
- items: - items:
- const: otg-bvalid - const: otg-bvalid
- const: otg-id - const: otg-id
- const: linestate - const: linestate
phy-supply: phy-supply:
description: description:
......
Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
View file @ f516fb70
...@@ -37,7 +37,7 @@ properties: ...@@ -37,7 +37,7 @@ properties:
- description: Address and length of PHY's common serdes block. - description: Address and length of PHY's common serdes block.
"#clock-cells": "#clock-cells":
enum: [ 1, 2 ] enum: [ 1, 2 ]
"#address-cells": "#address-cells":
enum: [ 1, 2 ] enum: [ 1, 2 ]
...@@ -65,16 +65,15 @@ properties: ...@@ -65,16 +65,15 @@ properties:
vdda-phy-supply: vdda-phy-supply:
description: description:
Phandle to a regulator supply to PHY core block. Phandle to a regulator supply to PHY core block.
vdda-pll-supply: vdda-pll-supply:
description: description:
Phandle to 1.8V regulator supply to PHY refclk pll block. Phandle to 1.8V regulator supply to PHY refclk pll block.
vddp-ref-clk-supply: vddp-ref-clk-supply:
description: description:
Phandle to a regulator supply to any specific refclk Phandle to a regulator supply to any specific refclk pll block.
pll block.
#Required nodes: #Required nodes:
patternProperties: patternProperties:
...@@ -184,8 +183,8 @@ allOf: ...@@ -184,8 +183,8 @@ allOf:
- description: phy common block reset. - description: phy common block reset.
reset-names: reset-names:
items: items:
- const: phy - const: phy
- const: common - const: common
- if: - if:
properties: properties:
compatible: compatible:
......
Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
View file @ f516fb70
...@@ -26,7 +26,7 @@ properties: ...@@ -26,7 +26,7 @@ properties:
- const: dp_com - const: dp_com
"#clock-cells": "#clock-cells":
enum: [ 1, 2 ] enum: [ 1, 2 ]
"#address-cells": "#address-cells":
enum: [ 1, 2 ] enum: [ 1, 2 ]
...@@ -62,16 +62,15 @@ properties: ...@@ -62,16 +62,15 @@ properties:
vdda-phy-supply: vdda-phy-supply:
description: description:
Phandle to a regulator supply to PHY core block. Phandle to a regulator supply to PHY core block.
vdda-pll-supply: vdda-pll-supply:
description: description:
Phandle to 1.8V regulator supply to PHY refclk pll block. Phandle to 1.8V regulator supply to PHY refclk pll block.
vddp-ref-clk-supply: vddp-ref-clk-supply:
description: description:
Phandle to a regulator supply to any specific refclk Phandle to a regulator supply to any specific refclk pll block.
pll block.
#Required nodes: #Required nodes:
patternProperties: patternProperties:
......
Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
View file @ f516fb70
...@@ -17,15 +17,15 @@ properties: ...@@ -17,15 +17,15 @@ properties:
compatible: compatible:
oneOf: oneOf:
- items: - items:
- enum: - enum:
- qcom,ipq8074-qusb2-phy - qcom,ipq8074-qusb2-phy
- qcom,msm8996-qusb2-phy - qcom,msm8996-qusb2-phy
- qcom,msm8998-qusb2-phy - qcom,msm8998-qusb2-phy
- items: - items:
- enum: - enum:
- qcom,sc7180-qusb2-phy - qcom,sc7180-qusb2-phy
- qcom,sdm845-qusb2-phy - qcom,sdm845-qusb2-phy
- const: qcom,qusb2-v2-phy - const: qcom,qusb2-v2-phy
reg: reg:
maxItems: 1 maxItems: 1
...@@ -49,12 +49,12 @@ properties: ...@@ -49,12 +49,12 @@ properties:
- const: iface - const: iface
vdda-pll-supply: vdda-pll-supply:
description: description:
Phandle to 1.8V regulator supply to PHY refclk pll block. Phandle to 1.8V regulator supply to PHY refclk pll block.
vdda-phy-dpdm-supply: vdda-phy-dpdm-supply:
description: description:
Phandle to 3.1V regulator supply to Dp/Dm port signals. Phandle to 3.1V regulator supply to Dp/Dm port signals.
resets: resets:
maxItems: 1 maxItems: 1
...@@ -64,12 +64,12 @@ properties: ...@@ -64,12 +64,12 @@ properties:
nvmem-cells: nvmem-cells:
maxItems: 1 maxItems: 1
description: description:
Phandle to nvmem cell that contains 'HS Tx trim' Phandle to nvmem cell that contains 'HS Tx trim'
tuning parameter value for qusb2 phy. tuning parameter value for qusb2 phy.
qcom,tcsr-syscon: qcom,tcsr-syscon:
description: description:
Phandle to TCSR syscon register region. Phandle to TCSR syscon register region.
$ref: /schemas/types.yaml#/definitions/phandle $ref: /schemas/types.yaml#/definitions/phandle
if: if:
......
Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml
View file @ f516fb70
...@@ -33,8 +33,8 @@ properties: ...@@ -33,8 +33,8 @@ properties:
clock-names: clock-names:
oneOf: oneOf:
- items: # for Pro5 - items: # for Pro5
- const: gio - const: gio
- const: link - const: link
- const: link # for others - const: link # for others
resets: resets:
...@@ -44,8 +44,8 @@ properties: ...@@ -44,8 +44,8 @@ properties:
reset-names: reset-names:
oneOf: oneOf:
- items: # for Pro5 - items: # for Pro5
- const: gio - const: gio
- const: link - const: link
- const: link # for others - const: link # for others
socionext,syscon: socionext,syscon:
......
Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
View file @ f516fb70
...@@ -37,12 +37,12 @@ properties: ...@@ -37,12 +37,12 @@ properties:
oneOf: oneOf:
- const: link # for PXs2 - const: link # for PXs2
- items: # for PXs3 with phy-ext - items: # for PXs3 with phy-ext
- const: link - const: link
- const: phy - const: phy
- const: phy-ext - const: phy-ext
- items: # for others - items: # for others
- const: link - const: link
- const: phy - const: phy
resets: resets:
maxItems: 2 maxItems: 2
......
Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
View file @ f516fb70
...@@ -37,15 +37,15 @@ properties: ...@@ -37,15 +37,15 @@ properties:
clock-names: clock-names:
oneOf: oneOf:
- items: # for Pro4, Pro5 - items: # for Pro4, Pro5
- const: gio - const: gio
- const: link - const: link
- items: # for PXs3 with phy-ext - items: # for PXs3 with phy-ext
- const: link - const: link
- const: phy - const: phy
- const: phy-ext - const: phy-ext
- items: # for others - items: # for others
- const: link - const: link
- const: phy - const: phy
resets: resets:
maxItems: 2 maxItems: 2
...@@ -53,11 +53,11 @@ properties: ...@@ -53,11 +53,11 @@ properties:
reset-names: reset-names:
oneOf: oneOf:
- items: # for Pro4,Pro5 - items: # for Pro4,Pro5
- const: gio - const: gio
- const: link - const: link
- items: # for others - items: # for others
- const: link - const: link
- const: phy - const: phy
vbus-supply: vbus-supply:
description: A phandle to the regulator for USB VBUS description: A phandle to the regulator for USB VBUS
......
Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
View file @ f516fb70
...@@ -203,7 +203,8 @@ examples: ...@@ -203,7 +203,8 @@ examples:
}; };
refclk-dig { refclk-dig {
clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; clocks = <&k3_clks 292 11>, <&k3_clks 292 0>,
<&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
#clock-cells = <0>; #clock-cells = <0>;
assigned-clocks = <&wiz0_refclk_dig>; assigned-clocks = <&wiz0_refclk_dig>;
assigned-clock-parents = <&k3_clks 292 11>; assigned-clock-parents = <&k3_clks 292 11>;
......
Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
View file @ f516fb70
...@@ -34,22 +34,22 @@ patternProperties: ...@@ -34,22 +34,22 @@ patternProperties:
patternProperties: patternProperties:
"^function|groups$": "^function|groups$":
$ref: "/schemas/types.yaml#/definitions/string" $ref: "/schemas/types.yaml#/definitions/string"
enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0,
GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4,
I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK, I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK,
MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2,
NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4,
NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0,
PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3,
RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD,
SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO,
SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU,
SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2,
TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM, TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM,
VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2]
required: required:
- compatible - compatible
......
Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
View file @ f516fb70
...@@ -43,24 +43,24 @@ patternProperties: ...@@ -43,24 +43,24 @@ patternProperties:
patternProperties: patternProperties:
"^function|groups$": "^function|groups$":
$ref: "/schemas/types.yaml#/definitions/string" $ref: "/schemas/types.yaml#/definitions/string"
enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2,
GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5,
I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC, I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC,
LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK,
MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4,
NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2,
NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0,
PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13,
SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1,
SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO,
SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG,
SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3, SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3,
TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6,
USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS, USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS,
VGAVS, VPI24, VPO, WDTRST1, WDTRST2] VGAVS, VPI24, VPO, WDTRST1, WDTRST2]
required: required:
- compatible - compatible
......
Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
View file @ f516fb70
...@@ -31,57 +31,57 @@ patternProperties: ...@@ -31,57 +31,57 @@ patternProperties:
properties: properties:
function: function:
$ref: "/schemas/types.yaml#/definitions/string" $ref: "/schemas/types.yaml#/definitions/string"
enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT,
FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3,
GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5,
GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16,
I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5,
I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ,
MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4,
NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2,
NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4,
NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11,
PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8, PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8,
PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14,
SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8,
SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ,
SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2,
SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14,
TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0,
THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12,
UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP,
USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4] USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ]
groups: groups:
$ref: "/schemas/types.yaml#/definitions/string" $ref: "/schemas/types.yaml#/definitions/string"
enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP, EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP,
GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10,
I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5,
I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,
LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3,
MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4,
NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,
NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,
OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0,
PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2,
PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1,
QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1,
SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0,
SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6,
SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL, SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL,
SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR,
SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11,
TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6,
TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3,
TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6,
UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
WDTRST3, WDTRST4] WDTRST3, WDTRST4]
required: required:
- compatible - compatible
......
Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
View file @ f516fb70
...@@ -32,20 +32,20 @@ properties: ...@@ -32,20 +32,20 @@ properties:
compatible: compatible:
oneOf: oneOf:
- enum: - enum:
- ingenic,jz4740-pinctrl - ingenic,jz4740-pinctrl
- ingenic,jz4725b-pinctrl - ingenic,jz4725b-pinctrl
- ingenic,jz4760-pinctrl - ingenic,jz4760-pinctrl
- ingenic,jz4770-pinctrl - ingenic,jz4770-pinctrl
- ingenic,jz4780-pinctrl - ingenic,jz4780-pinctrl
- ingenic,x1000-pinctrl - ingenic,x1000-pinctrl
- ingenic,x1500-pinctrl - ingenic,x1500-pinctrl
- ingenic,x1830-pinctrl - ingenic,x1830-pinctrl
- items: - items:
- const: ingenic,jz4760b-pinctrl - const: ingenic,jz4760b-pinctrl
- const: ingenic,jz4760-pinctrl - const: ingenic,jz4760-pinctrl
- items: - items:
- const: ingenic,x1000e-pinctrl - const: ingenic,x1000e-pinctrl
- const: ingenic,x1000-pinctrl - const: ingenic,x1000-pinctrl
reg: reg:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
View file @ f516fb70
...@@ -60,8 +60,8 @@ patternProperties: ...@@ -60,8 +60,8 @@ patternProperties:
oneOf: oneOf:
- pattern: "^gpio([1-9]|[1-7][0-9]|80)$" - pattern: "^gpio([1-9]|[1-7][0-9]|80)$"
- enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
qdsd_data3 ] qdsd_data3 ]
minItems: 1 minItems: 1
maxItems: 4 maxItems: 4
...@@ -70,31 +70,31 @@ patternProperties: ...@@ -70,31 +70,31 @@ patternProperties:
Specify the alternative function to be configured for the specified Specify the alternative function to be configured for the specified
pins. pins.
enum: [ adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, enum: [ adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char,
atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac, atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac,
atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0, atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0,
atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c, atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c,
blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c, blsp1_spi, blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c, blsp1_spi,
blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi, blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi,
blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi, blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi,
blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi, blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi,
blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst, blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst,
cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0, cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0,
cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v, cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v,
dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass, dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass,
flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0, gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0,
gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2, gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2,
ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc, ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc,
nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s, nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s,
pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b, pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a, pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1, pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1,
qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0,
qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1,
qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write, qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write,
sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3,
uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ] uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ]
drive-strength: drive-strength:
enum: [2, 4, 6, 8, 10, 12, 14, 16] enum: [2, 4, 6, 8, 10, 12, 14, 16]
......
Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
View file @ f516fb70
...@@ -76,22 +76,22 @@ patternProperties: ...@@ -76,22 +76,22 @@ patternProperties:
pins. pins.
enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c, enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c,
cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng, cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio, ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0, ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws, mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1, mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset, pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3, pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6, qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1, sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data, tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en, tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ] tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
drive-strength: drive-strength:
enum: [2, 4, 6, 8, 10, 12, 14, 16] enum: [2, 4, 6, 8, 10, 12, 14, 16]
......
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
View file @ f516fb70
...@@ -48,8 +48,8 @@ properties: ...@@ -48,8 +48,8 @@ properties:
st,package: st,package:
description: description:
Indicates the SOC package used. Indicates the SOC package used.
More details in include/dt-bindings/pinctrl/stm32-pinfunc.h More details in include/dt-bindings/pinctrl/stm32-pinfunc.h
$ref: /schemas/types.yaml#/definitions/uint32 $ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 2, 4, 8] enum: [1, 2, 4, 8]
......
Documentation/devicetree/bindings/power/power-domain.yaml
View file @ f516fb70
...@@ -58,13 +58,13 @@ properties: ...@@ -58,13 +58,13 @@ properties:
power-domains: power-domains:
description: description:
A phandle and PM domain specifier as defined by bindings of the power A phandle and PM domain specifier as defined by bindings of the power
controller specified by phandle. Some power domains might be powered controller specified by phandle. Some power domains might be powered
from another power domain (or have other hardware specific from another power domain (or have other hardware specific
dependencies). For representing such dependency a standard PM domain dependencies). For representing such dependency a standard PM domain
consumer binding is used. When provided, all domains created consumer binding is used. When provided, all domains created
by the given provider should be subdomains of the domain specified by the given provider should be subdomains of the domain specified
by this binding. by this binding.
required: required:
- "#power-domain-cells" - "#power-domain-cells"
......
Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
View file @ f516fb70
...@@ -44,9 +44,9 @@ required: ...@@ -44,9 +44,9 @@ required:
anyOf: anyOf:
- required: - required:
- gpios - gpios
- required: - required:
- charge-status-gpios - charge-status-gpios
additionalProperties: false additionalProperties: false
......
Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
View file @ f516fb70
...@@ -76,8 +76,7 @@ patternProperties: ...@@ -76,8 +76,7 @@ patternProperties:
"^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$": "^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$":
description: List of regulators and its properties description: List of regulators and its properties
allOf: $ref: regulator.yaml#
- $ref: regulator.yaml#
additionalProperties: false additionalProperties: false
......
Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
View file @ f516fb70
...@@ -29,7 +29,7 @@ properties: ...@@ -29,7 +29,7 @@ properties:
Short-circuit interrupt for lab. Short-circuit interrupt for lab.
required: required:
- interrupts - interrupts
ibb: ibb:
type: object type: object
...@@ -42,7 +42,7 @@ properties: ...@@ -42,7 +42,7 @@ properties:
Short-circuit interrupt for lab. Short-circuit interrupt for lab.
required: required:
- interrupts - interrupts
required: required:
- compatible - compatible
......
Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
View file @ f516fb70
...@@ -118,16 +118,16 @@ else: ...@@ -118,16 +118,16 @@ else:
- const: l1dram - const: l1dram
required: required:
- compatible - compatible
- reg - reg
- reg-names - reg-names
- ti,sci - ti,sci
- ti,sci-dev-id - ti,sci-dev-id
- ti,sci-proc-ids - ti,sci-proc-ids
- resets - resets
- firmware-name - firmware-name
- mboxes - mboxes
- memory-region - memory-region
unevaluatedProperties: false unevaluatedProperties: false
......
Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml
View file @ f516fb70
...@@ -24,9 +24,9 @@ properties: ...@@ -24,9 +24,9 @@ properties:
compatible: compatible:
items: items:
- enum: - enum:
- fsl,imx7d-src - fsl,imx7d-src
- fsl,imx8mq-src - fsl,imx8mq-src
- fsl,imx8mp-src - fsl,imx8mp-src
- const: syscon - const: syscon
reg: reg:
......
Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml
View file @ f516fb70
...@@ -16,16 +16,16 @@ properties: ...@@ -16,16 +16,16 @@ properties:
compatible: compatible:
oneOf: oneOf:
- enum: - enum:
- ingenic,jz4740-rtc - ingenic,jz4740-rtc
- ingenic,jz4760-rtc - ingenic,jz4760-rtc
- items: - items:
- const: ingenic,jz4725b-rtc - const: ingenic,jz4725b-rtc
- const: ingenic,jz4740-rtc - const: ingenic,jz4740-rtc
- items: - items:
- enum: - enum:
- ingenic,jz4770-rtc - ingenic,jz4770-rtc
- ingenic,jz4780-rtc - ingenic,jz4780-rtc
- const: ingenic,jz4760-rtc - const: ingenic,jz4760-rtc
reg: reg:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/serial/ingenic,uart.yaml
View file @ f516fb70
...@@ -16,18 +16,18 @@ properties: ...@@ -16,18 +16,18 @@ properties:
compatible: compatible:
oneOf: oneOf:
- enum: - enum:
- ingenic,jz4740-uart - ingenic,jz4740-uart
- ingenic,jz4760-uart - ingenic,jz4760-uart
- ingenic,jz4780-uart - ingenic,jz4780-uart
- ingenic,x1000-uart - ingenic,x1000-uart
- items: - items:
- enum: - enum:
- ingenic,jz4770-uart - ingenic,jz4770-uart
- ingenic,jz4775-uart - ingenic,jz4775-uart
- const: ingenic,jz4760-uart - const: ingenic,jz4760-uart
- items: - items:
- const: ingenic,jz4725b-uart - const: ingenic,jz4725b-uart
- const: ingenic,jz4740-uart - const: ingenic,jz4740-uart
reg: reg:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
View file @ f516fb70
...@@ -97,13 +97,13 @@ allOf: ...@@ -97,13 +97,13 @@ allOf:
clock-names: clock-names:
oneOf: oneOf:
- items: - items:
- const: t0_clk - const: t0_clk
- const: slow_clk - const: slow_clk
- items: - items:
- const: t0_clk - const: t0_clk
- const: t1_clk - const: t1_clk
- const: t2_clk - const: t2_clk
- const: slow_clk - const: slow_clk
required: required:
- compatible - compatible
......
Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
View file @ f516fb70
...@@ -7,8 +7,8 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" ...@@ -7,8 +7,8 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: GENI Serial Engine QUP Wrapper Controller title: GENI Serial Engine QUP Wrapper Controller
maintainers: maintainers:
- Mukesh Savaliya <msavaliy@codeaurora.org> - Mukesh Savaliya <msavaliy@codeaurora.org>
- Akash Asthana <akashast@codeaurora.org> - Akash Asthana <akashast@codeaurora.org>
description: | description: |
Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper
...@@ -38,10 +38,10 @@ properties: ...@@ -38,10 +38,10 @@ properties:
- description: Slave AHB Clock - description: Slave AHB Clock
"#address-cells": "#address-cells":
const: 2 const: 2
"#size-cells": "#size-cells":
const: 2 const: 2
ranges: true ranges: true
...@@ -79,15 +79,15 @@ patternProperties: ...@@ -79,15 +79,15 @@ patternProperties:
maxItems: 1 maxItems: 1
interconnects: interconnects:
minItems: 2 minItems: 2
maxItems: 3 maxItems: 3
interconnect-names: interconnect-names:
minItems: 2 minItems: 2
items: items:
- const: qup-core - const: qup-core
- const: qup-config - const: qup-config
- const: qup-memory - const: qup-memory
required: required:
- reg - reg
...@@ -111,10 +111,10 @@ patternProperties: ...@@ -111,10 +111,10 @@ patternProperties:
maxItems: 1 maxItems: 1
"#address-cells": "#address-cells":
const: 1 const: 1
"#size-cells": "#size-cells":
const: 0 const: 0
required: required:
- compatible - compatible
...@@ -136,10 +136,10 @@ patternProperties: ...@@ -136,10 +136,10 @@ patternProperties:
maxItems: 1 maxItems: 1
"#address-cells": "#address-cells":
const: 1 const: 1
"#size-cells": "#size-cells":
const: 0 const: 0
clock-frequency: clock-frequency:
description: Desired I2C bus clock frequency in Hz. description: Desired I2C bus clock frequency in Hz.
......
Documentation/devicetree/bindings/sound/amlogic,aiu.yaml
View file @ f516fb70
...@@ -19,12 +19,11 @@ properties: ...@@ -19,12 +19,11 @@ properties:
compatible: compatible:
items: items:
- enum: - enum:
- amlogic,aiu-gxbb - amlogic,aiu-gxbb
- amlogic,aiu-gxl - amlogic,aiu-gxl
- amlogic,aiu-meson8 - amlogic,aiu-meson8
- amlogic,aiu-meson8b - amlogic,aiu-meson8b
- const: - const: amlogic,aiu
amlogic,aiu
clocks: clocks:
items: items:
......
Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml
View file @ f516fb70
...@@ -19,13 +19,11 @@ properties: ...@@ -19,13 +19,11 @@ properties:
compatible: compatible:
oneOf: oneOf:
- items: - items:
- const: - const: amlogic,g12a-toacodec
amlogic,g12a-toacodec
- items: - items:
- enum: - enum:
- amlogic,sm1-toacodec - amlogic,sm1-toacodec
- const: - const: amlogic,g12a-toacodec
amlogic,g12a-toacodec
reg: reg:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml
View file @ f516fb70
...@@ -11,7 +11,7 @@ maintainers: ...@@ -11,7 +11,7 @@ maintainers:
properties: properties:
compatible: compatible:
const: cirrus,cs42l51 const: cirrus,cs42l51
reg: reg:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/sound/ingenic,aic.yaml
View file @ f516fb70
...@@ -16,13 +16,13 @@ properties: ...@@ -16,13 +16,13 @@ properties:
compatible: compatible:
oneOf: oneOf:
- enum: - enum:
- ingenic,jz4740-i2s - ingenic,jz4740-i2s
- ingenic,jz4760-i2s - ingenic,jz4760-i2s
- ingenic,jz4770-i2s - ingenic,jz4770-i2s
- ingenic,jz4780-i2s - ingenic,jz4780-i2s
- items: - items:
- const: ingenic,jz4725b-i2s - const: ingenic,jz4725b-i2s
- const: ingenic,jz4740-i2s - const: ingenic,jz4740-i2s
'#sound-dai-cells': '#sound-dai-cells':
const: 0 const: 0
......
Documentation/devicetree/bindings/sound/maxim,max98390.yaml
View file @ f516fb70
...@@ -11,7 +11,7 @@ maintainers: ...@@ -11,7 +11,7 @@ maintainers:
properties: properties:
compatible: compatible:
const: maxim,max98390 const: maxim,max98390
reg: reg:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
View file @ f516fb70
...@@ -19,16 +19,16 @@ properties: ...@@ -19,16 +19,16 @@ properties:
- const: rockchip,rk3066-i2s - const: rockchip,rk3066-i2s
- items: - items:
- enum: - enum:
- rockchip,px30-i2s - rockchip,px30-i2s
- rockchip,rk3036-i2s - rockchip,rk3036-i2s
- rockchip,rk3188-i2s - rockchip,rk3188-i2s
- rockchip,rk3228-i2s - rockchip,rk3228-i2s
- rockchip,rk3288-i2s - rockchip,rk3288-i2s
- rockchip,rk3308-i2s - rockchip,rk3308-i2s
- rockchip,rk3328-i2s - rockchip,rk3328-i2s
- rockchip,rk3366-i2s - rockchip,rk3366-i2s
- rockchip,rk3368-i2s - rockchip,rk3368-i2s
- rockchip,rk3399-i2s - rockchip,rk3399-i2s
- const: rockchip,rk3066-i2s - const: rockchip,rk3066-i2s
reg: reg:
...@@ -55,8 +55,8 @@ properties: ...@@ -55,8 +55,8 @@ properties:
oneOf: oneOf:
- const: rx - const: rx
- items: - items:
- const: tx - const: tx
- const: rx - const: rx
power-domains: power-domains:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/sound/rockchip-spdif.yaml
View file @ f516fb70
...@@ -25,8 +25,8 @@ properties: ...@@ -25,8 +25,8 @@ properties:
- const: rockchip,rk3399-spdif - const: rockchip,rk3399-spdif
- items: - items:
- enum: - enum:
- rockchip,rk3188-spdif - rockchip,rk3188-spdif
- rockchip,rk3288-spdif - rockchip,rk3288-spdif
- const: rockchip,rk3066-spdif - const: rockchip,rk3066-spdif
reg: reg:
......
Documentation/devicetree/bindings/sound/tas2770.yaml
View file @ f516fb70
...@@ -44,8 +44,8 @@ properties: ...@@ -44,8 +44,8 @@ properties:
$ref: /schemas/types.yaml#/definitions/uint32 $ref: /schemas/types.yaml#/definitions/uint32
description: Sets TDM RX capture edge. description: Sets TDM RX capture edge.
enum: enum:
- 0 # Rising edge - 0 # Rising edge
- 1 # Falling edge - 1 # Falling edge
'#sound-dai-cells': '#sound-dai-cells':
const: 1 const: 1
......
Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
View file @ f516fb70
...@@ -32,32 +32,32 @@ properties: ...@@ -32,32 +32,32 @@ properties:
reg: reg:
maxItems: 1 maxItems: 1
description: | description: |
I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
reset-gpios: reset-gpios:
description: | description: |
GPIO used for hardware reset. GPIO used for hardware reset.
areg-supply: areg-supply:
description: | description: |
Regulator with AVDD at 3.3V. If not defined then the internal regulator Regulator with AVDD at 3.3V. If not defined then the internal regulator
is enabled. is enabled.
ti,mic-bias-source: ti,mic-bias-source:
description: | description: |
Indicates the source for MIC Bias. Indicates the source for MIC Bias.
0 - Mic bias is set to VREF 0 - Mic bias is set to VREF
1 - Mic bias is set to VREF × 1.096 1 - Mic bias is set to VREF × 1.096
6 - Mic bias is set to AVDD 6 - Mic bias is set to AVDD
$ref: /schemas/types.yaml#/definitions/uint32 $ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 6] enum: [0, 1, 6]
ti,vref-source: ti,vref-source:
description: | description: |
Indicates the source for MIC Bias. Indicates the source for MIC Bias.
0 - Set VREF to 2.75V 0 - Set VREF to 2.75V
1 - Set VREF to 2.5V 1 - Set VREF to 2.5V
2 - Set VREF to 1.375V 2 - Set VREF to 1.375V
$ref: /schemas/types.yaml#/definitions/uint32 $ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2] enum: [0, 1, 2]
...@@ -109,7 +109,7 @@ properties: ...@@ -109,7 +109,7 @@ properties:
default: [0, 0, 0, 0] default: [0, 0, 0, 0]
patternProperties: patternProperties:
'^ti,gpo-config-[1-4]$': '^ti,gpo-config-[1-4]$':
$ref: /schemas/types.yaml#/definitions/uint32-array $ref: /schemas/types.yaml#/definitions/uint32-array
description: | description: |
Defines the configuration and output driver for the general purpose Defines the configuration and output driver for the general purpose
......
Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
View file @ f516fb70
...@@ -22,10 +22,10 @@ properties: ...@@ -22,10 +22,10 @@ properties:
- const: allwinner,sun6i-a31-spi - const: allwinner,sun6i-a31-spi
- const: allwinner,sun8i-h3-spi - const: allwinner,sun8i-h3-spi
- items: - items:
- enum: - enum:
- allwinner,sun8i-r40-spi - allwinner,sun8i-r40-spi
- allwinner,sun50i-h6-spi - allwinner,sun50i-h6-spi
- const: allwinner,sun8i-h3-spi - const: allwinner,sun8i-h3-spi
reg: reg:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
View file @ f516fb70
...@@ -23,19 +23,19 @@ properties: ...@@ -23,19 +23,19 @@ properties:
- const: fsl,imx51-ecspi - const: fsl,imx51-ecspi
- const: fsl,imx53-ecspi - const: fsl,imx53-ecspi
- items: - items:
- enum: - enum:
- fsl,imx50-ecspi - fsl,imx50-ecspi
- fsl,imx6q-ecspi - fsl,imx6q-ecspi
- fsl,imx6sx-ecspi - fsl,imx6sx-ecspi
- fsl,imx6sl-ecspi - fsl,imx6sl-ecspi
- fsl,imx6sll-ecspi - fsl,imx6sll-ecspi
- fsl,imx6ul-ecspi - fsl,imx6ul-ecspi
- fsl,imx7d-ecspi - fsl,imx7d-ecspi
- fsl,imx8mq-ecspi - fsl,imx8mq-ecspi
- fsl,imx8mm-ecspi - fsl,imx8mm-ecspi
- fsl,imx8mn-ecspi - fsl,imx8mn-ecspi
- fsl,imx8mp-ecspi - fsl,imx8mp-ecspi
- const: fsl,imx51-ecspi - const: fsl,imx51-ecspi
reg: reg:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
View file @ f516fb70
...@@ -33,4 +33,4 @@ examples: ...@@ -33,4 +33,4 @@ examples:
reg = <0x1f000000 0x10>; reg = <0x1f000000 0x10>;
}; };
... ...
\ No newline at end of file
Documentation/devicetree/bindings/spi/spi-mux.yaml
View file @ f516fb70
...@@ -43,47 +43,47 @@ properties: ...@@ -43,47 +43,47 @@ properties:
maxItems: 1 maxItems: 1
required: required:
- compatible - compatible
- reg - reg
- spi-max-frequency - spi-max-frequency
- mux-controls - mux-controls
examples: examples:
- | - |
#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/gpio.h>
mux: mux-controller { mux: mux-controller {
compatible = "gpio-mux"; compatible = "gpio-mux";
#mux-control-cells = <0>; #mux-control-cells = <0>;
mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
}; };
spi { spi {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
spi@0 { spi@0 {
compatible = "spi-mux"; compatible = "spi-mux";
reg = <0>; reg = <0>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
spi-max-frequency = <100000000>; spi-max-frequency = <100000000>;
mux-controls = <&mux>; mux-controls = <&mux>;
spi-flash@0 { spi-flash@0 {
compatible = "jedec,spi-nor"; compatible = "jedec,spi-nor";
reg = <0>; reg = <0>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
spi-max-frequency = <40000000>; spi-max-frequency = <40000000>;
}; };
spi-device@1 { spi-device@1 {
compatible = "lineartechnology,ltc2488"; compatible = "lineartechnology,ltc2488";
reg = <1>; reg = <1>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
spi-max-frequency = <10000000>; spi-max-frequency = <10000000>;
}; };
}; };
}; };
Documentation/devicetree/bindings/spi/spi-rockchip.yaml
View file @ f516fb70
...@@ -26,13 +26,13 @@ properties: ...@@ -26,13 +26,13 @@ properties:
- const: rockchip,rv1108-spi - const: rockchip,rv1108-spi
- items: - items:
- enum: - enum:
- rockchip,px30-spi - rockchip,px30-spi
- rockchip,rk3188-spi - rockchip,rk3188-spi
- rockchip,rk3288-spi - rockchip,rk3288-spi
- rockchip,rk3308-spi - rockchip,rk3308-spi
- rockchip,rk3328-spi - rockchip,rk3328-spi
- rockchip,rk3368-spi - rockchip,rk3368-spi
- rockchip,rk3399-spi - rockchip,rk3399-spi
- const: rockchip,rk3066-spi - const: rockchip,rk3066-spi
reg: reg:
......
Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
View file @ f516fb70
...@@ -44,9 +44,9 @@ select: true ...@@ -44,9 +44,9 @@ select: true
properties: properties:
"#cooling-cells": "#cooling-cells":
description: description:
Must be 2, in order to specify minimum and maximum cooling state used in Must be 2, in order to specify minimum and maximum cooling state used in
the cooling-maps reference. The first cell is the minimum cooling state the cooling-maps reference. The first cell is the minimum cooling state
and the second cell is the maximum cooling state requested. and the second cell is the maximum cooling state requested.
const: 2 const: 2
examples: examples:
......
Documentation/devicetree/bindings/thermal/thermal-idle.yaml
View file @ f516fb70
...@@ -18,29 +18,28 @@ description: | ...@@ -18,29 +18,28 @@ description: |
This binding describes the thermal idle node. This binding describes the thermal idle node.
properties: properties:
$nodename: $nodename:
const: thermal-idle const: thermal-idle
description: | description: |
A thermal-idle node describes the idle cooling device properties to A thermal-idle node describes the idle cooling device properties to
cool down efficiently the attached thermal zone. cool down efficiently the attached thermal zone.
'#cooling-cells': '#cooling-cells':
const: 2 const: 2
description: | description: |
Must be 2, in order to specify minimum and maximum cooling state used in Must be 2, in order to specify minimum and maximum cooling state used in
the cooling-maps reference. The first cell is the minimum cooling state the cooling-maps reference. The first cell is the minimum cooling state
and the second cell is the maximum cooling state requested. and the second cell is the maximum cooling state requested.
duration-us: duration-us:
description: | description: |
The idle duration in microsecond the device should cool down. The idle duration in microsecond the device should cool down.
exit-latency-us: exit-latency-us:
description: | description: |
The exit latency constraint in microsecond for the injected The exit latency constraint in microsecond for the injected idle state
idle state for the device. It is the latency constraint to for the device. It is the latency constraint to apply when selecting an
apply when selecting an idle state from among all the present idle state from among all the present ones.
ones.
required: required:
- '#cooling-cells' - '#cooling-cells'
......
Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
View file @ f516fb70
...@@ -20,17 +20,17 @@ properties: ...@@ -20,17 +20,17 @@ properties:
- const: fsl,imx31-gpt - const: fsl,imx31-gpt
- items: - items:
- enum: - enum:
- fsl,imx25-gpt - fsl,imx25-gpt
- fsl,imx50-gpt - fsl,imx50-gpt
- fsl,imx51-gpt - fsl,imx51-gpt
- fsl,imx53-gpt - fsl,imx53-gpt
- fsl,imx6q-gpt - fsl,imx6q-gpt
- const: fsl,imx31-gpt - const: fsl,imx31-gpt
- const: fsl,imx6dl-gpt - const: fsl,imx6dl-gpt
- items: - items:
- enum: - enum:
- fsl,imx6sl-gpt - fsl,imx6sl-gpt
- fsl,imx6sx-gpt - fsl,imx6sx-gpt
- const: fsl,imx6dl-gpt - const: fsl,imx6dl-gpt
reg: reg:
......
Documentation/devicetree/bindings/timer/ingenic,tcu.yaml
View file @ f516fb70
...@@ -49,16 +49,16 @@ properties: ...@@ -49,16 +49,16 @@ properties:
compatible: compatible:
oneOf: oneOf:
- items: - items:
- enum: - enum:
- ingenic,jz4740-tcu - ingenic,jz4740-tcu
- ingenic,jz4725b-tcu - ingenic,jz4725b-tcu
- ingenic,jz4770-tcu - ingenic,jz4770-tcu
- ingenic,x1000-tcu - ingenic,x1000-tcu
- const: simple-mfd - const: simple-mfd
- items: - items:
- const: ingenic,jz4780-tcu - const: ingenic,jz4780-tcu
- const: ingenic,jz4770-tcu - const: ingenic,jz4770-tcu
- const: simple-mfd - const: simple-mfd
reg: reg:
maxItems: 1 maxItems: 1
...@@ -113,13 +113,13 @@ patternProperties: ...@@ -113,13 +113,13 @@ patternProperties:
compatible: compatible:
oneOf: oneOf:
- enum: - enum:
- ingenic,jz4740-watchdog - ingenic,jz4740-watchdog
- ingenic,jz4780-watchdog - ingenic,jz4780-watchdog
- items: - items:
- enum: - enum:
- ingenic,jz4770-watchdog - ingenic,jz4770-watchdog
- ingenic,jz4725b-watchdog - ingenic,jz4725b-watchdog
- const: ingenic,jz4740-watchdog - const: ingenic,jz4740-watchdog
reg: reg:
maxItems: 1 maxItems: 1
...@@ -143,13 +143,13 @@ patternProperties: ...@@ -143,13 +143,13 @@ patternProperties:
compatible: compatible:
oneOf: oneOf:
- enum: - enum:
- ingenic,jz4740-pwm - ingenic,jz4740-pwm
- ingenic,jz4725b-pwm - ingenic,jz4725b-pwm
- items: - items:
- enum: - enum:
- ingenic,jz4770-pwm - ingenic,jz4770-pwm
- ingenic,jz4780-pwm - ingenic,jz4780-pwm
- const: ingenic,jz4740-pwm - const: ingenic,jz4740-pwm
reg: reg:
maxItems: 1 maxItems: 1
...@@ -182,11 +182,11 @@ patternProperties: ...@@ -182,11 +182,11 @@ patternProperties:
compatible: compatible:
oneOf: oneOf:
- enum: - enum:
- ingenic,jz4725b-ost - ingenic,jz4725b-ost
- ingenic,jz4770-ost - ingenic,jz4770-ost
- items: - items:
- const: ingenic,jz4780-ost - const: ingenic,jz4780-ost
- const: ingenic,jz4770-ost - const: ingenic,jz4770-ost
reg: reg:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml
View file @ f516fb70
...@@ -27,8 +27,8 @@ properties: ...@@ -27,8 +27,8 @@ properties:
clocks: clocks:
minItems: 1 minItems: 1
items: items:
- description: Timer ticks reference clock source - description: Timer ticks reference clock source
- description: APB interface clock source - description: APB interface clock source
clock-names: clock-names:
minItems: 1 minItems: 1
......
Documentation/devicetree/bindings/trivial-devices.yaml
View file @ f516fb70
...@@ -298,7 +298,7 @@ properties: ...@@ -298,7 +298,7 @@ properties:
- national,lm80 - national,lm80
# Temperature sensor with integrated fan control # Temperature sensor with integrated fan control
- national,lm85 - national,lm85
# ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator with Two-Wire Interface # I2C ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator
- national,lm92 - national,lm92
# i2c trusted platform module (TPM) # i2c trusted platform module (TPM)
- nuvoton,npct501 - nuvoton,npct501
......
Documentation/devicetree/bindings/usb/dwc2.yaml
View file @ f516fb70
...@@ -19,24 +19,24 @@ properties: ...@@ -19,24 +19,24 @@ properties:
- const: snps,dwc2 - const: snps,dwc2
- items: - items:
- enum: - enum:
- rockchip,px30-usb - rockchip,px30-usb
- rockchip,rk3036-usb - rockchip,rk3036-usb
- rockchip,rk3188-usb - rockchip,rk3188-usb
- rockchip,rk3228-usb - rockchip,rk3228-usb
- rockchip,rk3288-usb - rockchip,rk3288-usb
- rockchip,rk3328-usb - rockchip,rk3328-usb
- rockchip,rk3368-usb - rockchip,rk3368-usb
- rockchip,rv1108-usb - rockchip,rv1108-usb
- const: rockchip,rk3066-usb - const: rockchip,rk3066-usb
- const: snps,dwc2 - const: snps,dwc2
- const: lantiq,arx100-usb - const: lantiq,arx100-usb
- const: lantiq,xrx200-usb - const: lantiq,xrx200-usb
- items: - items:
- enum: - enum:
- amlogic,meson8-usb - amlogic,meson8-usb
- amlogic,meson8b-usb - amlogic,meson8b-usb
- amlogic,meson-gxbb-usb - amlogic,meson-gxbb-usb
- amlogic,meson-g12a-usb - amlogic,meson-g12a-usb
- const: snps,dwc2 - const: snps,dwc2
- const: amcc,dwc-otg - const: amcc,dwc-otg
- const: snps,dwc2 - const: snps,dwc2
...@@ -116,12 +116,13 @@ properties: ...@@ -116,12 +116,13 @@ properties:
snps,need-phy-for-wake: snps,need-phy-for-wake:
$ref: /schemas/types.yaml#/definitions/flag $ref: /schemas/types.yaml#/definitions/flag
description: If present indicates that the phy needs to be left on for remote wakeup during suspend. description: If present indicates that the phy needs to be left on for
remote wakeup during suspend.
snps,reset-phy-on-wake: snps,reset-phy-on-wake:
$ref: /schemas/types.yaml#/definitions/flag $ref: /schemas/types.yaml#/definitions/flag
description: If present indicates that we need to reset the PHY when we detect a wakeup. description: If present indicates that we need to reset the PHY when we
This is due to a hardware errata. detect a wakeup. This is due to a hardware errata.
required: required:
- compatible - compatible
......
Documentation/devicetree/bindings/usb/generic-ehci.yaml
View file @ f516fb70
...@@ -80,7 +80,7 @@ properties: ...@@ -80,7 +80,7 @@ properties:
companion: companion:
$ref: /schemas/types.yaml#/definitions/phandle $ref: /schemas/types.yaml#/definitions/phandle
description: description:
Phandle of a companion. Phandle of a companion.
phys: phys:
description: PHY specifier for the USB PHY description: PHY specifier for the USB PHY
......
Documentation/devicetree/bindings/usb/ingenic,musb.yaml
View file @ f516fb70
...@@ -16,11 +16,11 @@ properties: ...@@ -16,11 +16,11 @@ properties:
compatible: compatible:
oneOf: oneOf:
- enum: - enum:
- ingenic,jz4770-musb - ingenic,jz4770-musb
- ingenic,jz4740-musb - ingenic,jz4740-musb
- items: - items:
- const: ingenic,jz4725b-musb - const: ingenic,jz4725b-musb
- const: ingenic,jz4740-musb - const: ingenic,jz4740-musb
reg: reg:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
View file @ f516fb70
...@@ -57,11 +57,11 @@ properties: ...@@ -57,11 +57,11 @@ properties:
minItems: 4 minItems: 4
maxItems: 5 maxItems: 5
items: items:
- const: dev - const: dev
- const: ss - const: ss
- const: ss_src - const: ss_src
- const: fs_src - const: fs_src
- const: hs_src - const: hs_src
power-domains: power-domains:
items: items:
......
Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
View file @ f516fb70
...@@ -19,9 +19,9 @@ properties: ...@@ -19,9 +19,9 @@ properties:
power-domains: power-domains:
description: description:
PM domain provider node and an args specifier containing PM domain provider node and an args specifier containing
the USB device id value. See, the USB device id value. See,
Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
clocks: clocks:
description: Clock phandles to usb2_refclk and lpm_clk description: Clock phandles to usb2_refclk and lpm_clk
......
Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml
View file @ f516fb70
...@@ -13,8 +13,8 @@ properties: ...@@ -13,8 +13,8 @@ properties:
compatible: compatible:
items: items:
- enum: - enum:
- ti,keystone-dwc3 - ti,keystone-dwc3
- ti,am654-dwc3 - ti,am654-dwc3
reg: reg:
maxItems: 1 maxItems: 1
......
Documentation/devicetree/bindings/vendor-prefixes.yaml
View file @ f516fb70
...@@ -993,7 +993,8 @@ patternProperties: ...@@ -993,7 +993,8 @@ patternProperties:
"^sst,.*": "^sst,.*":
description: Silicon Storage Technology, Inc. description: Silicon Storage Technology, Inc.
"^sstar,.*": "^sstar,.*":
description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd. (formerly part of MStar Semiconductor, Inc.) description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd.
(formerly part of MStar Semiconductor, Inc.)
"^st,.*": "^st,.*":
description: STMicroelectronics description: STMicroelectronics
"^starry,.*": "^starry,.*":
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7