dt-bindings: Whitespace clean-ups in schema files

Clean-up incorrect indentation, extra spaces, long lines, and missing
EOF newline in schema files. Most of the clean-ups are for list
indentation which should always be 2 spaces more than the preceding
keyword.

Found with yamllint (which I plan to integrate into the checks).

Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-clk@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-spi@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-remoteproc@vger.kernel.org
Cc: linux-hwmon@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: netdev@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Documentation/devicetree/bindings/arm/fsl.yaml

@@ -273,8 +273,8 @@ properties:
               - fsl,imx6ull-14x14-evk     # i.MX6 UltraLiteLite 14x14 EVK Board
               - kontron,imx6ull-n6411-som # Kontron N6411 SOM
               - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board
-              - toradex,colibri-imx6ull-eval            # Colibri iMX6ULL Module on Colibri Evaluation Board
-              - toradex,colibri-imx6ull-wifi-eval       # Colibri iMX6ULL Wi-Fi / Bluetooth Module on Colibri Evaluation Board
+              - toradex,colibri-imx6ull-eval      # Colibri iMX6ULL Module on Colibri Eval Board
+              - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board
           - const: fsl,imx6ull
 
       - description: Kontron N6411 S Board
@@ -312,9 +312,12 @@ properties:
               - toradex,colibri-imx7d                   # Colibri iMX7 Dual Module
               - toradex,colibri-imx7d-aster             # Colibri iMX7 Dual Module on Aster Carrier Board
               - toradex,colibri-imx7d-emmc              # Colibri iMX7 Dual 1GB (eMMC) Module
-              - toradex,colibri-imx7d-emmc-aster        # Colibri iMX7 Dual 1GB (eMMC) Module on Aster Carrier Board
-              - toradex,colibri-imx7d-emmc-eval-v3      # Colibri iMX7 Dual 1GB (eMMC) Module on Colibri Evaluation Board V3
-              - toradex,colibri-imx7d-eval-v3           # Colibri iMX7 Dual Module on Colibri Evaluation Board V3
+              - toradex,colibri-imx7d-emmc-aster        # Colibri iMX7 Dual 1GB (eMMC) Module on
+                                                        #  Aster Carrier Board
+              - toradex,colibri-imx7d-emmc-eval-v3      # Colibri iMX7 Dual 1GB (eMMC) Module on
+                                                        #  Colibri Evaluation Board V3
+              - toradex,colibri-imx7d-eval-v3           # Colibri iMX7 Dual Module on
+                                                        #  Colibri Evaluation Board V3
               - tq,imx7d-mba7             # i.MX7D TQ MBa7 with TQMa7D SoM
               - zii,imx7d-rmu2            # ZII RMU2 Board
               - zii,imx7d-rpu2            # ZII RPU2 Board

Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml

@@ -16,7 +16,7 @@ properties:
   "#clock-cells":
     const: 1
 
-  compatible :
+  compatible:
     enum:
       - sprd,sc9863a-ap-clk
       - sprd,sc9863a-aon-clk

Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml

@@ -163,7 +163,6 @@ additionalProperties: false
 
 examples:
   - |
-
     #include <dt-bindings/clock/imx8mq-clock.h>
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>

Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml

@@ -26,7 +26,6 @@ properties:
     items:
       - enum:
           - dlink,dir-685-panel
-
       - const: ilitek,ili9322
 
   reset-gpios: true

Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml

@@ -14,7 +14,6 @@ properties:
     items:
       - enum:
           - bananapi,lhr050h41
-
       - const: ilitek,ili9881c
 
   backlight: true

Documentation/devicetree/bindings/display/st,stm32-dsi.yaml

@@ -147,4 +147,3 @@ examples:
 
 ...
 
-

Documentation/devicetree/bindings/example-schema.yaml

@@ -177,10 +177,10 @@ properties:
 dependencies:
   # 'vendor,bool-property' is only allowed when 'vendor,string-array-property'
   # is present
-  vendor,bool-property: [ vendor,string-array-property ]
+  vendor,bool-property: [ 'vendor,string-array-property' ]
   # Expressing 2 properties in both orders means all of the set of properties
   # must be present or none of them.
-  vendor,string-array-property: [ vendor,bool-property ]
+  vendor,string-array-property: [ 'vendor,bool-property' ]
 
 required:
   - compatible

Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml

@@ -19,10 +19,8 @@ properties:
 
   reg:
     items:
-      - description: the I/O address containing the GPIO controller
-                     registers.
-      - description: the I/O address containing the Chip Common A interrupt
-                     registers.
+      - description: the I/O address containing the GPIO controller registers.
+      - description: the I/O address containing the Chip Common A interrupt registers.
 
   gpio-controller: true
 

Documentation/devicetree/bindings/gpu/vivante,gc.yaml

@@ -26,7 +26,8 @@ properties:
       - description: AXI/master interface clock
       - description: GPU core clock
       - description: Shader clock (only required if GPU has feature PIPE_3D)
-      - description: AHB/slave interface clock (only required if GPU can gate slave interface independently)
+      - description: AHB/slave interface clock (only required if GPU can gate 
+          slave interface independently)
     minItems: 1
     maxItems: 4
 

Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml

@@ -103,7 +103,6 @@ patternProperties:
           - items:
               - const: 1
               - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
-
           - items:
               - const: 10
               - const: 81

Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml

@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: HMC425A 6-bit Digital Step Attenuator
 
 maintainers:
-- Michael Hennerich <michael.hennerich@analog.com>
-- Beniamin Bia <beniamin.bia@analog.com>
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Beniamin Bia <beniamin.bia@analog.com>
 
 description: |
   Digital Step Attenuator IIO device with gpio interface.

Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml

@@ -87,7 +87,7 @@ properties:
         description: Output range of the channel.
         items:
           - const: 0
-            - enum: [ 140000, 250000 ]
+          - enum: [140000, 250000]
 
   channel@2:
     description: Represents an external channel which are
@@ -103,7 +103,7 @@ properties:
         description: Output range of the channel.
         items:
           - const: 0
-            - enum: [ 55000, 150000 ]
+          - enum: [55000, 150000]
 
 patternProperties:
   "^channel@([3-5])$":
@@ -119,16 +119,16 @@ patternProperties:
         description: Output range of the channel.
         items:
           - const: 0
-            - enum: [ 45000, 100000 ]
+          - enum: [45000, 100000]
 
 required:
-- reg
-- channel@0
-- channel@1
-- channel@2
-- channel@3
-- channel@4
-- channel@5
+  - reg
+  - channel@0
+  - channel@1
+  - channel@2
+  - channel@3
+  - channel@4
+  - channel@5
 
 examples:
   - |

Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml

@@ -36,7 +36,7 @@ required:
 additionalProperties: false
 
 examples:
-- |
+  - |
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;

Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml

@@ -51,7 +51,7 @@ required:
   - touchscreen-max-pressure
 
 examples:
-- |
+  - |
     #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
       #address-cells = <1>;

Documentation/devicetree/bindings/input/touchscreen/goodix.yaml

@@ -35,9 +35,8 @@ properties:
     maxItems: 1
 
   irq-gpios:
-    description: GPIO pin used for IRQ.
-                 The driver uses the interrupt gpio pin as
-                 output to reset the device.
+    description: GPIO pin used for IRQ. The driver uses the interrupt gpio pin
+      as output to reset the device.
     maxItems: 1
 
   reset-gpios:

Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml

@@ -33,8 +33,8 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
 
   touchscreen-min-pressure:
-    description: minimum pressure on the touchscreen to be achieved in order for the
-                 touchscreen driver to report a touch event.
+    description: minimum pressure on the touchscreen to be achieved in order
+      for the touchscreen driver to report a touch event.
     $ref: /schemas/types.yaml#/definitions/uint32
 
   touchscreen-fuzz-x:
@@ -46,13 +46,13 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
 
   touchscreen-fuzz-pressure:
-    description: pressure noise value of the absolute input device (arbitrary range
-                 dependent on the controller)
+    description: pressure noise value of the absolute input device (arbitrary
+      range dependent on the controller)
     $ref: /schemas/types.yaml#/definitions/uint32
 
   touchscreen-average-samples:
-    description: Number of data samples which are averaged for each read (valid values
-                 dependent on the controller)
+    description: Number of data samples which are averaged for each read (valid
+      values dependent on the controller)
     $ref: /schemas/types.yaml#/definitions/uint32
 
   touchscreen-inverted-x:

Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml

@@ -79,7 +79,8 @@ properties:
     description: |
       kHz; switching frequency.
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ]
+    enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 
+            2400, 3200, 4800, 9600 ]
 
   qcom,ovp:
     description: |

Documentation/devicetree/bindings/media/i2c/adv7180.yaml

@@ -58,8 +58,7 @@ allOf:
   - if:
       properties:
         compatible:
-          items:
-            - enum:
+          enum:
             - adi,adv7180
             - adi,adv7182
             - adi,adv7280

Documentation/devicetree/bindings/media/i2c/ov8856.yaml

@@ -139,3 +139,4 @@ examples:
         };
     };
 ...
+

Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml

@@ -65,13 +65,12 @@ properties:
       0x2d - RAW14
       0x2e - RAW16
       0x2f - RAW20
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - anyOf:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
       - minimum: 0x1e
-        - maximum: 0x24
+        maximum: 0x24
       - minimum: 0x28
-        - maximum: 0x2f
+        maximum: 0x2f
 
   xlnx,vfb:
     type: boolean

Documentation/devicetree/bindings/mfd/st,stpmic1.yaml

@@ -113,8 +113,8 @@ properties:
             maxItems: 1
 
           st,mask-reset:
-            description: mask reset for this regulator,
-                         the regulator configuration is maintained during pmic reset.
+            description: mask reset for this regulator, the regulator configuration
+              is maintained during pmic reset.
             $ref: /schemas/types.yaml#/definitions/flag
 
           regulator-name: true
@@ -135,8 +135,8 @@ properties:
             maxItems: 1
 
           st,mask-reset:
-            description: mask reset for this regulator,
-                         the regulator configuration is maintained during pmic reset.
+            description: mask reset for this regulator, the regulator configuration
+              is maintained during pmic reset.
             $ref: /schemas/types.yaml#/definitions/flag
 
           regulator-name: true
@@ -154,8 +154,8 @@ properties:
             maxItems: 1
 
           st,mask-reset:
-            description: mask reset for this regulator,
-                         the regulator configuration is maintained during pmic reset.
+            description: mask reset for this regulator, the regulator configuration
+              is maintained during pmic reset.
             $ref: /schemas/types.yaml#/definitions/flag
 
           regulator-name: true
@@ -172,8 +172,8 @@ properties:
             maxItems: 1
 
           st,mask-reset:
-            description: mask reset for this regulator,
-                         the regulator configuration is maintained during pmic reset.
+            description: mask reset for this regulator, the regulator configuration
+              is maintained during pmic reset.
             $ref: /schemas/types.yaml#/definitions/flag
 
           regulator-name: true
@@ -198,8 +198,8 @@ properties:
             maxItems: 1
 
           st,mask-reset:
-            description: mask reset for this regulator,
-                         the regulator configuration is maintained during pmic reset.
+            description: mask reset for this regulator, the regulator configuration
+              is maintained during pmic reset.
             $ref: /schemas/types.yaml#/definitions/flag
 
           regulator-name: true
@@ -220,8 +220,8 @@ properties:
             maxItems: 1
 
           st,mask-reset:
-            description: mask reset for this regulator,
-                         the regulator configuration is maintained during pmic reset.
+            description: mask reset for this regulator, the regulator configuration
+              is maintained during pmic reset.
             $ref: /schemas/types.yaml#/definitions/flag
 
           regulator-name: true

Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml

@@ -24,8 +24,7 @@ maintainers:
 
 properties:
   compatible:
-    anyOf:
-      - items:
+    items:
       - enum:
           - ti,j721e-system-controller
       - const: syscon

Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml

@@ -14,12 +14,10 @@ maintainers:
 
 properties:
   compatible:
-    oneOf:
-      - items:
+    items:
       - enum:
           - xlnx,zynqmp-nand-controller
-        - enum:
-          - arasan,nfc-v3p10
+      - const: arasan,nfc-v3p10
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml

@@ -42,7 +42,7 @@ patternProperties:
         const: 512
 
       nand-ecc-strength:
-        enum: [1, 4 ,8 ]
+        enum: [1, 4, 8]
 
 allOf:
   - $ref: "nand-controller.yaml#"

Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml

@@ -73,8 +73,7 @@ properties:
 
   vddp-ref-clk-supply:
     description:
-        Phandle to a regulator supply to any specific refclk
-        pll block.
+      Phandle to a regulator supply to any specific refclk pll block.
 
 #Required nodes:
 patternProperties:

Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml

@@ -70,8 +70,7 @@ properties:
 
   vddp-ref-clk-supply:
     description:
-        Phandle to a regulator supply to any specific refclk
-        pll block.
+      Phandle to a regulator supply to any specific refclk pll block.
 
 #Required nodes:
 patternProperties:

Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml

@@ -203,7 +203,8 @@ examples:
            };
 
            refclk-dig {
-                  clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+                  clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, 
+                          <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
                   #clock-cells = <0>;
                   assigned-clocks = <&wiz0_refclk_dig>;
                   assigned-clock-parents = <&k3_clks 292 11>;

Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml

@@ -34,7 +34,7 @@ patternProperties:
       patternProperties:
         "^function|groups$":
           $ref: "/schemas/types.yaml#/definitions/string"
-          enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
+          enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
                   ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
                   EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0,
                   GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4,

Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml

@@ -43,7 +43,7 @@ patternProperties:
       patternProperties:
         "^function|groups$":
           $ref: "/schemas/types.yaml#/definitions/string"
-          enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
+          enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
                   ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
                   ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2,
                   GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5,

Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml

@@ -31,7 +31,7 @@ patternProperties:
       properties:
         function:
           $ref: "/schemas/types.yaml#/definitions/string"
-          enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
+          enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
                   ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT,
                   FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3,
                   GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5,
@@ -52,11 +52,11 @@ patternProperties:
                   TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0,
                   THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12,
                   UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP,
-            USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4]
+                  USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ]
 
         groups:
           $ref: "/schemas/types.yaml#/definitions/string"
-          enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
+          enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
                   ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
                   EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP,
                   GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,

Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml

@@ -76,8 +76,7 @@ patternProperties:
 
   "^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$":
     description: List of regulators and its properties
-    allOf:
-     - $ref: regulator.yaml#
+    $ref: regulator.yaml#
 
 additionalProperties: false
 

Documentation/devicetree/bindings/sound/amlogic,aiu.yaml

@@ -23,8 +23,7 @@ properties:
           - amlogic,aiu-gxl
           - amlogic,aiu-meson8
           - amlogic,aiu-meson8b
-      - const:
-          amlogic,aiu
+      - const: amlogic,aiu
 
   clocks:
     items:

Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml

@@ -19,13 +19,11 @@ properties:
   compatible:
     oneOf:
       - items:
-        - const:
-            amlogic,g12a-toacodec
+          - const: amlogic,g12a-toacodec
       - items:
           - enum:
               - amlogic,sm1-toacodec
-        - const:
-            amlogic,g12a-toacodec
+          - const: amlogic,g12a-toacodec
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/thermal/thermal-idle.yaml

@@ -37,10 +37,9 @@ properties:
 
   exit-latency-us:
     description: |
-         The exit latency constraint in microsecond for the injected
-         idle state for the device. It is the latency constraint to
-         apply when selecting an idle state from among all the present
-         ones.
+      The exit latency constraint in microsecond for the injected idle state 
+      for the device. It is the latency constraint to apply when selecting an 
+      idle state from among all the present ones.
 
 required:
   - '#cooling-cells'

Documentation/devicetree/bindings/trivial-devices.yaml

@@ -298,7 +298,7 @@ properties:
           - national,lm80
             # Temperature sensor with integrated fan control
           - national,lm85
-            # ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator with Two-Wire Interface
+            # I2C ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator
           - national,lm92
             # i2c trusted platform module (TPM)
           - nuvoton,npct501

Documentation/devicetree/bindings/usb/dwc2.yaml

@@ -116,12 +116,13 @@ properties:
 
   snps,need-phy-for-wake:
     $ref: /schemas/types.yaml#/definitions/flag
-    description: If present indicates that the phy needs to be left on for remote wakeup during suspend.
+    description: If present indicates that the phy needs to be left on for 
+      remote wakeup during suspend.
 
   snps,reset-phy-on-wake:
     $ref: /schemas/types.yaml#/definitions/flag
-    description: If present indicates that we need to reset the PHY when we detect a wakeup.
-                 This is due to a hardware errata.
+    description: If present indicates that we need to reset the PHY when we 
+      detect a wakeup. This is due to a hardware errata.
 
 required:
   - compatible

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -993,7 +993,8 @@ patternProperties:
   "^sst,.*":
     description: Silicon Storage Technology, Inc.
   "^sstar,.*":
-    description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd. (formerly part of MStar Semiconductor, Inc.)
+    description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd. 
+      (formerly part of MStar Semiconductor, Inc.)
   "^st,.*":
     description: STMicroelectronics
   "^starry,.*":