Commit f516fb70 authored by Rob Herring's avatar Rob Herring

dt-bindings: Whitespace clean-ups in schema files

Clean-up incorrect indentation, extra spaces, long lines, and missing
EOF newline in schema files. Most of the clean-ups are for list
indentation which should always be 2 spaces more than the preceding
keyword.

Found with yamllint (which I plan to integrate into the checks).

Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-clk@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-spi@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-remoteproc@vger.kernel.org
Cc: linux-hwmon@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: netdev@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Acked-by: default avatarSam Ravnborg <sam@ravnborg.org>
Signed-off-by: default avatarRob Herring <robh@kernel.org>
parent 7c2a69f6
......@@ -273,8 +273,8 @@ properties:
- fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board
- kontron,imx6ull-n6411-som # Kontron N6411 SOM
- myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board
- toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Evaluation Board
- toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / Bluetooth Module on Colibri Evaluation Board
- toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Eval Board
- toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board
- const: fsl,imx6ull
- description: Kontron N6411 S Board
......@@ -312,9 +312,12 @@ properties:
- toradex,colibri-imx7d # Colibri iMX7 Dual Module
- toradex,colibri-imx7d-aster # Colibri iMX7 Dual Module on Aster Carrier Board
- toradex,colibri-imx7d-emmc # Colibri iMX7 Dual 1GB (eMMC) Module
- toradex,colibri-imx7d-emmc-aster # Colibri iMX7 Dual 1GB (eMMC) Module on Aster Carrier Board
- toradex,colibri-imx7d-emmc-eval-v3 # Colibri iMX7 Dual 1GB (eMMC) Module on Colibri Evaluation Board V3
- toradex,colibri-imx7d-eval-v3 # Colibri iMX7 Dual Module on Colibri Evaluation Board V3
- toradex,colibri-imx7d-emmc-aster # Colibri iMX7 Dual 1GB (eMMC) Module on
# Aster Carrier Board
- toradex,colibri-imx7d-emmc-eval-v3 # Colibri iMX7 Dual 1GB (eMMC) Module on
# Colibri Evaluation Board V3
- toradex,colibri-imx7d-eval-v3 # Colibri iMX7 Dual Module on
# Colibri Evaluation Board V3
- tq,imx7d-mba7 # i.MX7D TQ MBa7 with TQMa7D SoM
- zii,imx7d-rmu2 # ZII RMU2 Board
- zii,imx7d-rpu2 # ZII RPU2 Board
......
......@@ -16,7 +16,7 @@ properties:
"#clock-cells":
const: 1
compatible :
compatible:
enum:
- sprd,sc9863a-ap-clk
- sprd,sc9863a-aon-clk
......
......@@ -163,7 +163,6 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/clock/imx8mq-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
......
......@@ -26,7 +26,6 @@ properties:
items:
- enum:
- dlink,dir-685-panel
- const: ilitek,ili9322
reset-gpios: true
......
......@@ -14,7 +14,6 @@ properties:
items:
- enum:
- bananapi,lhr050h41
- const: ilitek,ili9881c
backlight: true
......
......@@ -177,10 +177,10 @@ properties:
dependencies:
# 'vendor,bool-property' is only allowed when 'vendor,string-array-property'
# is present
vendor,bool-property: [ vendor,string-array-property ]
vendor,bool-property: [ 'vendor,string-array-property' ]
# Expressing 2 properties in both orders means all of the set of properties
# must be present or none of them.
vendor,string-array-property: [ vendor,bool-property ]
vendor,string-array-property: [ 'vendor,bool-property' ]
required:
- compatible
......
......@@ -19,10 +19,8 @@ properties:
reg:
items:
- description: the I/O address containing the GPIO controller
registers.
- description: the I/O address containing the Chip Common A interrupt
registers.
- description: the I/O address containing the GPIO controller registers.
- description: the I/O address containing the Chip Common A interrupt registers.
gpio-controller: true
......
......@@ -26,7 +26,8 @@ properties:
- description: AXI/master interface clock
- description: GPU core clock
- description: Shader clock (only required if GPU has feature PIPE_3D)
- description: AHB/slave interface clock (only required if GPU can gate slave interface independently)
- description: AHB/slave interface clock (only required if GPU can gate
slave interface independently)
minItems: 1
maxItems: 4
......
......@@ -103,7 +103,6 @@ patternProperties:
- items:
- const: 1
- enum: [ 1, 3, 4, 6, 20, 8, 10 ]
- items:
- const: 10
- const: 81
......
......@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: HMC425A 6-bit Digital Step Attenuator
maintainers:
- Michael Hennerich <michael.hennerich@analog.com>
- Beniamin Bia <beniamin.bia@analog.com>
- Michael Hennerich <michael.hennerich@analog.com>
- Beniamin Bia <beniamin.bia@analog.com>
description: |
Digital Step Attenuator IIO device with gpio interface.
......
......@@ -87,7 +87,7 @@ properties:
description: Output range of the channel.
items:
- const: 0
- enum: [ 140000, 250000 ]
- enum: [140000, 250000]
channel@2:
description: Represents an external channel which are
......@@ -103,7 +103,7 @@ properties:
description: Output range of the channel.
items:
- const: 0
- enum: [ 55000, 150000 ]
- enum: [55000, 150000]
patternProperties:
"^channel@([3-5])$":
......@@ -119,16 +119,16 @@ patternProperties:
description: Output range of the channel.
items:
- const: 0
- enum: [ 45000, 100000 ]
- enum: [45000, 100000]
required:
- reg
- channel@0
- channel@1
- channel@2
- channel@3
- channel@4
- channel@5
- reg
- channel@0
- channel@1
- channel@2
- channel@3
- channel@4
- channel@5
examples:
- |
......
......@@ -36,7 +36,7 @@ required:
additionalProperties: false
examples:
- |
- |
i2c {
#address-cells = <1>;
#size-cells = <0>;
......
......@@ -51,7 +51,7 @@ required:
- touchscreen-max-pressure
examples:
- |
- |
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
......
......@@ -35,9 +35,8 @@ properties:
maxItems: 1
irq-gpios:
description: GPIO pin used for IRQ.
The driver uses the interrupt gpio pin as
output to reset the device.
description: GPIO pin used for IRQ. The driver uses the interrupt gpio pin
as output to reset the device.
maxItems: 1
reset-gpios:
......
......@@ -33,8 +33,8 @@ properties:
$ref: /schemas/types.yaml#/definitions/uint32
touchscreen-min-pressure:
description: minimum pressure on the touchscreen to be achieved in order for the
touchscreen driver to report a touch event.
description: minimum pressure on the touchscreen to be achieved in order
for the touchscreen driver to report a touch event.
$ref: /schemas/types.yaml#/definitions/uint32
touchscreen-fuzz-x:
......@@ -46,13 +46,13 @@ properties:
$ref: /schemas/types.yaml#/definitions/uint32
touchscreen-fuzz-pressure:
description: pressure noise value of the absolute input device (arbitrary range
dependent on the controller)
description: pressure noise value of the absolute input device (arbitrary
range dependent on the controller)
$ref: /schemas/types.yaml#/definitions/uint32
touchscreen-average-samples:
description: Number of data samples which are averaged for each read (valid values
dependent on the controller)
description: Number of data samples which are averaged for each read (valid
values dependent on the controller)
$ref: /schemas/types.yaml#/definitions/uint32
touchscreen-inverted-x:
......
......@@ -79,7 +79,8 @@ properties:
description: |
kHz; switching frequency.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ]
enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920,
2400, 3200, 4800, 9600 ]
qcom,ovp:
description: |
......
......@@ -58,8 +58,7 @@ allOf:
- if:
properties:
compatible:
items:
- enum:
enum:
- adi,adv7180
- adi,adv7182
- adi,adv7280
......
......@@ -65,13 +65,12 @@ properties:
0x2d - RAW14
0x2e - RAW16
0x2f - RAW20
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- anyOf:
$ref: /schemas/types.yaml#/definitions/uint32
oneOf:
- minimum: 0x1e
- maximum: 0x24
maximum: 0x24
- minimum: 0x28
- maximum: 0x2f
maximum: 0x2f
xlnx,vfb:
type: boolean
......
......@@ -113,8 +113,8 @@ properties:
maxItems: 1
st,mask-reset:
description: mask reset for this regulator,
the regulator configuration is maintained during pmic reset.
description: mask reset for this regulator, the regulator configuration
is maintained during pmic reset.
$ref: /schemas/types.yaml#/definitions/flag
regulator-name: true
......@@ -135,8 +135,8 @@ properties:
maxItems: 1
st,mask-reset:
description: mask reset for this regulator,
the regulator configuration is maintained during pmic reset.
description: mask reset for this regulator, the regulator configuration
is maintained during pmic reset.
$ref: /schemas/types.yaml#/definitions/flag
regulator-name: true
......@@ -154,8 +154,8 @@ properties:
maxItems: 1
st,mask-reset:
description: mask reset for this regulator,
the regulator configuration is maintained during pmic reset.
description: mask reset for this regulator, the regulator configuration
is maintained during pmic reset.
$ref: /schemas/types.yaml#/definitions/flag
regulator-name: true
......@@ -172,8 +172,8 @@ properties:
maxItems: 1
st,mask-reset:
description: mask reset for this regulator,
the regulator configuration is maintained during pmic reset.
description: mask reset for this regulator, the regulator configuration
is maintained during pmic reset.
$ref: /schemas/types.yaml#/definitions/flag
regulator-name: true
......@@ -198,8 +198,8 @@ properties:
maxItems: 1
st,mask-reset:
description: mask reset for this regulator,
the regulator configuration is maintained during pmic reset.
description: mask reset for this regulator, the regulator configuration
is maintained during pmic reset.
$ref: /schemas/types.yaml#/definitions/flag
regulator-name: true
......@@ -220,8 +220,8 @@ properties:
maxItems: 1
st,mask-reset:
description: mask reset for this regulator,
the regulator configuration is maintained during pmic reset.
description: mask reset for this regulator, the regulator configuration
is maintained during pmic reset.
$ref: /schemas/types.yaml#/definitions/flag
regulator-name: true
......
......@@ -24,8 +24,7 @@ maintainers:
properties:
compatible:
anyOf:
- items:
items:
- enum:
- ti,j721e-system-controller
- const: syscon
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment