net: wangxun: move MDIO bus implementation to the library

Move similar code of accessing MDIO bus from txgbe/ngbe to libwx.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230912031424.721386-1-jiawenwu@trustnetic.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

drivers/net/ethernet/wangxun/libwx/wx_hw.c

@@ -12,6 +12,98 @@
 #include "wx_lib.h"
 #include "wx_hw.h"
 
+static int wx_phy_read_reg_mdi(struct mii_bus *bus, int phy_addr, int devnum, int regnum)
+{
+	struct wx *wx = bus->priv;
+	u32 command, val;
+	int ret;
+
+	/* setup and write the address cycle command */
+	command = WX_MSCA_RA(regnum) |
+		  WX_MSCA_PA(phy_addr) |
+		  WX_MSCA_DA(devnum);
+	wr32(wx, WX_MSCA, command);
+
+	command = WX_MSCC_CMD(WX_MSCA_CMD_READ) | WX_MSCC_BUSY;
+	if (wx->mac.type == wx_mac_em)
+		command |= WX_MDIO_CLK(6);
+	wr32(wx, WX_MSCC, command);
+
+	/* wait to complete */
+	ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
+				100000, false, wx, WX_MSCC);
+	if (ret) {
+		wx_err(wx, "Mdio read c22 command did not complete.\n");
+		return ret;
+	}
+
+	return (u16)rd32(wx, WX_MSCC);
+}
+
+static int wx_phy_write_reg_mdi(struct mii_bus *bus, int phy_addr,
+				int devnum, int regnum, u16 value)
+{
+	struct wx *wx = bus->priv;
+	u32 command, val;
+	int ret;
+
+	/* setup and write the address cycle command */
+	command = WX_MSCA_RA(regnum) |
+		  WX_MSCA_PA(phy_addr) |
+		  WX_MSCA_DA(devnum);
+	wr32(wx, WX_MSCA, command);
+
+	command = value | WX_MSCC_CMD(WX_MSCA_CMD_WRITE) | WX_MSCC_BUSY;
+	if (wx->mac.type == wx_mac_em)
+		command |= WX_MDIO_CLK(6);
+	wr32(wx, WX_MSCC, command);
+
+	/* wait to complete */
+	ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
+				100000, false, wx, WX_MSCC);
+	if (ret)
+		wx_err(wx, "Mdio write c22 command did not complete.\n");
+
+	return ret;
+}
+
+int wx_phy_read_reg_mdi_c22(struct mii_bus *bus, int phy_addr, int regnum)
+{
+	struct wx *wx = bus->priv;
+
+	wr32(wx, WX_MDIO_CLAUSE_SELECT, 0xF);
+	return wx_phy_read_reg_mdi(bus, phy_addr, 0, regnum);
+}
+EXPORT_SYMBOL(wx_phy_read_reg_mdi_c22);
+
+int wx_phy_write_reg_mdi_c22(struct mii_bus *bus, int phy_addr, int regnum, u16 value)
+{
+	struct wx *wx = bus->priv;
+
+	wr32(wx, WX_MDIO_CLAUSE_SELECT, 0xF);
+	return wx_phy_write_reg_mdi(bus, phy_addr, 0, regnum, value);
+}
+EXPORT_SYMBOL(wx_phy_write_reg_mdi_c22);
+
+int wx_phy_read_reg_mdi_c45(struct mii_bus *bus, int phy_addr, int devnum, int regnum)
+{
+	struct wx *wx = bus->priv;
+
+	wr32(wx, WX_MDIO_CLAUSE_SELECT, 0);
+	return wx_phy_read_reg_mdi(bus, phy_addr, devnum, regnum);
+}
+EXPORT_SYMBOL(wx_phy_read_reg_mdi_c45);
+
+int wx_phy_write_reg_mdi_c45(struct mii_bus *bus, int phy_addr,
+			     int devnum, int regnum, u16 value)
+{
+	struct wx *wx = bus->priv;
+
+	wr32(wx, WX_MDIO_CLAUSE_SELECT, 0);
+	return wx_phy_write_reg_mdi(bus, phy_addr, devnum, regnum, value);
+}
+EXPORT_SYMBOL(wx_phy_write_reg_mdi_c45);
+
 static void wx_intr_disable(struct wx *wx, u64 qmask)
 {
 	u32 mask;

drivers/net/ethernet/wangxun/libwx/wx_hw.h

@@ -4,6 +4,13 @@
 #ifndef _WX_HW_H_
 #define _WX_HW_H_
 
+#include <linux/phy.h>
+
+int wx_phy_read_reg_mdi_c22(struct mii_bus *bus, int phy_addr, int regnum);
+int wx_phy_write_reg_mdi_c22(struct mii_bus *bus, int phy_addr, int regnum, u16 value);
+int wx_phy_read_reg_mdi_c45(struct mii_bus *bus, int phy_addr, int devnum, int regnum);
+int wx_phy_write_reg_mdi_c45(struct mii_bus *bus, int phy_addr,
+			     int devnum, int regnum, u16 value);
 void wx_intr_enable(struct wx *wx, u64 qmask);
 void wx_irq_disable(struct wx *wx);
 int wx_check_flash_load(struct wx *wx, u32 check_bit);

drivers/net/ethernet/wangxun/libwx/wx_type.h

@@ -251,6 +251,7 @@ enum WX_MSCA_CMD_value {
 #define WX_MSCC_SADDR                BIT(18)
 #define WX_MSCC_BUSY                 BIT(22)
 #define WX_MDIO_CLK(v)               FIELD_PREP(GENMASK(21, 19), v)
+#define WX_MDIO_CLAUSE_SELECT        0x11220
 #define WX_MMC_CONTROL               0x11800
 #define WX_MMC_CONTROL_RSTONRD       BIT(2) /* reset on read */
 

drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c

@@ -29,117 +29,6 @@ static int ngbe_phy_write_reg_internal(struct mii_bus *bus, int phy_addr, int re
 	return 0;
 }
 
-static int ngbe_phy_read_reg_mdi_c22(struct mii_bus *bus, int phy_addr, int regnum)
-{
-	u32 command, val, device_type = 0;
-	struct wx *wx = bus->priv;
-	int ret;
-
-	wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0xF);
-	/* setup and write the address cycle command */
-	command = WX_MSCA_RA(regnum) |
-		  WX_MSCA_PA(phy_addr) |
-		  WX_MSCA_DA(device_type);
-	wr32(wx, WX_MSCA, command);
-	command = WX_MSCC_CMD(WX_MSCA_CMD_READ) |
-		  WX_MSCC_BUSY |
-		  WX_MDIO_CLK(6);
-	wr32(wx, WX_MSCC, command);
-
-	/* wait to complete */
-	ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
-				100000, false, wx, WX_MSCC);
-	if (ret) {
-		wx_err(wx, "Mdio read c22 command did not complete.\n");
-		return ret;
-	}
-
-	return (u16)rd32(wx, WX_MSCC);
-}
-
-static int ngbe_phy_write_reg_mdi_c22(struct mii_bus *bus, int phy_addr, int regnum, u16 value)
-{
-	u32 command, val, device_type = 0;
-	struct wx *wx = bus->priv;
-	int ret;
-
-	wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0xF);
-	/* setup and write the address cycle command */
-	command = WX_MSCA_RA(regnum) |
-		  WX_MSCA_PA(phy_addr) |
-		  WX_MSCA_DA(device_type);
-	wr32(wx, WX_MSCA, command);
-	command = value |
-		  WX_MSCC_CMD(WX_MSCA_CMD_WRITE) |
-		  WX_MSCC_BUSY |
-		  WX_MDIO_CLK(6);
-	wr32(wx, WX_MSCC, command);
-
-	/* wait to complete */
-	ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
-				100000, false, wx, WX_MSCC);
-	if (ret)
-		wx_err(wx, "Mdio write c22 command did not complete.\n");
-
-	return ret;
-}
-
-static int ngbe_phy_read_reg_mdi_c45(struct mii_bus *bus, int phy_addr, int devnum, int regnum)
-{
-	struct wx *wx = bus->priv;
-	u32 val, command;
-	int ret;
-
-	wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0x0);
-	/* setup and write the address cycle command */
-	command = WX_MSCA_RA(regnum) |
-		  WX_MSCA_PA(phy_addr) |
-		  WX_MSCA_DA(devnum);
-	wr32(wx, WX_MSCA, command);
-	command = WX_MSCC_CMD(WX_MSCA_CMD_READ) |
-		  WX_MSCC_BUSY |
-		  WX_MDIO_CLK(6);
-	wr32(wx, WX_MSCC, command);
-
-	/* wait to complete */
-	ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
-				100000, false, wx, WX_MSCC);
-	if (ret) {
-		wx_err(wx, "Mdio read c45 command did not complete.\n");
-		return ret;
-	}
-
-	return (u16)rd32(wx, WX_MSCC);
-}
-
-static int ngbe_phy_write_reg_mdi_c45(struct mii_bus *bus, int phy_addr,
-				      int devnum, int regnum, u16 value)
-{
-	struct wx *wx = bus->priv;
-	int ret, command;
-	u16 val;
-
-	wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0x0);
-	/* setup and write the address cycle command */
-	command = WX_MSCA_RA(regnum) |
-		  WX_MSCA_PA(phy_addr) |
-		  WX_MSCA_DA(devnum);
-	wr32(wx, WX_MSCA, command);
-	command = value |
-		  WX_MSCC_CMD(WX_MSCA_CMD_WRITE) |
-		  WX_MSCC_BUSY |
-		  WX_MDIO_CLK(6);
-	wr32(wx, WX_MSCC, command);
-
-	/* wait to complete */
-	ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
-				100000, false, wx, WX_MSCC);
-	if (ret)
-		wx_err(wx, "Mdio write c45 command did not complete.\n");
-
-	return ret;
-}
-
 static int ngbe_phy_read_reg_c22(struct mii_bus *bus, int phy_addr, int regnum)
 {
 	struct wx *wx = bus->priv;
@@ -148,7 +37,7 @@ static int ngbe_phy_read_reg_c22(struct mii_bus *bus, int phy_addr, int regnum)
 	if (wx->mac_type == em_mac_type_mdi)
 		phy_data = ngbe_phy_read_reg_internal(bus, phy_addr, regnum);
 	else
-		phy_data = ngbe_phy_read_reg_mdi_c22(bus, phy_addr, regnum);
+		phy_data = wx_phy_read_reg_mdi_c22(bus, phy_addr, regnum);
 
 	return phy_data;
 }
@@ -162,7 +51,7 @@ static int ngbe_phy_write_reg_c22(struct mii_bus *bus, int phy_addr,
 	if (wx->mac_type == em_mac_type_mdi)
 		ret = ngbe_phy_write_reg_internal(bus, phy_addr, regnum, value);
 	else
-		ret = ngbe_phy_write_reg_mdi_c22(bus, phy_addr, regnum, value);
+		ret = wx_phy_write_reg_mdi_c22(bus, phy_addr, regnum, value);
 
 	return ret;
 }
@@ -262,8 +151,8 @@ int ngbe_mdio_init(struct wx *wx)
 	mii_bus->priv = wx;
 
 	if (wx->mac_type == em_mac_type_rgmii) {
-		mii_bus->read_c45 = ngbe_phy_read_reg_mdi_c45;
-		mii_bus->write_c45 = ngbe_phy_write_reg_mdi_c45;
+		mii_bus->read_c45 = wx_phy_read_reg_mdi_c45;
+		mii_bus->write_c45 = wx_phy_write_reg_mdi_c45;
 	}
 
 	snprintf(mii_bus->id, MII_BUS_ID_SIZE, "ngbe-%x", pci_dev_id(pdev));

drivers/net/ethernet/wangxun/ngbe/ngbe_type.h

@@ -59,9 +59,6 @@
 #define NGBE_EEPROM_VERSION_L			0x1D
 #define NGBE_EEPROM_VERSION_H			0x1E
 
-/* Media-dependent registers. */
-#define NGBE_MDIO_CLAUSE_SELECT			0x11220
-
 /* GPIO Registers */
 #define NGBE_GPIO_DR				0x14800
 #define NGBE_GPIO_DDR				0x14804

drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c

@@ -647,58 +647,6 @@ static int txgbe_sfp_register(struct txgbe *txgbe)
 	return 0;
 }
 
-static int txgbe_phy_read(struct mii_bus *bus, int phy_addr,
-			  int devnum, int regnum)
-{
-	struct wx *wx = bus->priv;
-	u32 val, command;
-	int ret;
-
-	/* setup and write the address cycle command */
-	command = WX_MSCA_RA(regnum) |
-		  WX_MSCA_PA(phy_addr) |
-		  WX_MSCA_DA(devnum);
-	wr32(wx, WX_MSCA, command);
-
-	command = WX_MSCC_CMD(WX_MSCA_CMD_READ) | WX_MSCC_BUSY;
-	wr32(wx, WX_MSCC, command);
-
-	/* wait to complete */
-	ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
-				100000, false, wx, WX_MSCC);
-	if (ret) {
-		wx_err(wx, "Mdio read c45 command did not complete.\n");
-		return ret;
-	}
-
-	return (u16)rd32(wx, WX_MSCC);
-}
-
-static int txgbe_phy_write(struct mii_bus *bus, int phy_addr,
-			   int devnum, int regnum, u16 value)
-{
-	struct wx *wx = bus->priv;
-	int ret, command;
-	u16 val;
-
-	/* setup and write the address cycle command */
-	command = WX_MSCA_RA(regnum) |
-		  WX_MSCA_PA(phy_addr) |
-		  WX_MSCA_DA(devnum);
-	wr32(wx, WX_MSCA, command);
-
-	command = value | WX_MSCC_CMD(WX_MSCA_CMD_WRITE) | WX_MSCC_BUSY;
-	wr32(wx, WX_MSCC, command);
-
-	/* wait to complete */
-	ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
-				100000, false, wx, WX_MSCC);
-	if (ret)
-		wx_err(wx, "Mdio write c45 command did not complete.\n");
-
-	return ret;
-}
-
 static int txgbe_ext_phy_init(struct txgbe *txgbe)
 {
 	struct phy_device *phydev;
@@ -715,8 +663,8 @@ static int txgbe_ext_phy_init(struct txgbe *txgbe)
 		return -ENOMEM;
 
 	mii_bus->name = "txgbe_mii_bus";
-	mii_bus->read_c45 = &txgbe_phy_read;
-	mii_bus->write_c45 = &txgbe_phy_write;
+	mii_bus->read_c45 = &wx_phy_read_reg_mdi_c45;
+	mii_bus->write_c45 = &wx_phy_write_reg_mdi_c45;
 	mii_bus->parent = &pdev->dev;
 	mii_bus->phy_mask = GENMASK(31, 1);
 	mii_bus->priv = wx;