NFS: Switch in new NFSv3 decoder functions

The naming scheme of the new decoder functions, which follows the
NFSv4 XDR decoder functions, is slightly different than the scheme
used for the old functions.  Rename the functions as a separate
step to keep the patches clean.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

fs/nfs/nfs3xdr.c

@@ -42,10 +42,6 @@
 #define NFS3_pre_op_attr_sz	(1+NFS3_wcc_attr_sz)
 #define NFS3_post_op_attr_sz	(1+NFS3_fattr_sz)
 #define NFS3_wcc_data_sz	(NFS3_pre_op_attr_sz+NFS3_post_op_attr_sz)
-#define NFS3_fsstat_sz		
-#define NFS3_fsinfo_sz		
-#define NFS3_pathconf_sz		
-#define NFS3_entry_sz		(NFS3_filename_sz+3)
 #define NFS3_diropargs_sz	(NFS3_fh_sz+NFS3_filename_sz)
 
 #define NFS3_getattrargs_sz	(NFS3_fh_sz)
@@ -66,9 +62,9 @@
 #define NFS3_readdirplusargs_sz	(NFS3_fh_sz+NFS3_cookieverf_sz+4)
 #define NFS3_commitargs_sz	(NFS3_fh_sz+3)
 
-#define NFS3_attrstat_sz	(1+NFS3_fattr_sz)
-#define NFS3_wccstat_sz		(1+NFS3_wcc_data_sz)
-#define NFS3_removeres_sz	(NFS3_wccstat_sz)
+#define NFS3_getattrres_sz	(1+NFS3_fattr_sz)
+#define NFS3_setattrres_sz	(1+NFS3_wcc_data_sz)
+#define NFS3_removeres_sz	(NFS3_setattrres_sz)
 #define NFS3_lookupres_sz	(1+NFS3_fh_sz+(2 * NFS3_post_op_attr_sz))
 #define NFS3_accessres_sz	(1+NFS3_post_op_attr_sz+1)
 #define NFS3_readlinkres_sz	(1+NFS3_post_op_attr_sz+1)
@@ -3017,36 +3013,36 @@ static int nfs3_xdr_dec_setacl3res(struct rpc_rqst *req, __be32 *p,
 [NFS3PROC_##proc] = {							\
 	.p_proc      = NFS3PROC_##proc,					\
 	.p_encode    = (kxdrproc_t)nfs3_xdr_enc_##argtype##3args,	\
-	.p_decode    = (kxdrproc_t) nfs3_xdr_##restype,			\
+	.p_decode    = (kxdrproc_t)nfs3_xdr_dec_##restype##3res,	\
 	.p_arglen    = NFS3_##argtype##args_sz,				\
-	.p_replen    = NFS3_##restype##_sz,				\
+	.p_replen    = NFS3_##restype##res_sz,				\
 	.p_timer     = timer,						\
 	.p_statidx   = NFS3PROC_##proc,					\
 	.p_name      = #proc,						\
 	}
 
 struct rpc_procinfo	nfs3_procedures[] = {
-	PROC(GETATTR,		getattr,	attrstat,	1),
-	PROC(SETATTR,		setattr,	wccstat,	0),
-	PROC(LOOKUP,		lookup,		lookupres,	2),
-	PROC(ACCESS,		access,		accessres,	1),
-	PROC(READLINK,		readlink,	readlinkres,	3),
-	PROC(READ,		read,		readres,	3),
-	PROC(WRITE,		write,		writeres,	4),
-	PROC(CREATE,		create,		createres,	0),
-	PROC(MKDIR,		mkdir,		createres,	0),
-	PROC(SYMLINK,		symlink,	createres,	0),
-	PROC(MKNOD,		mknod,		createres,	0),
-	PROC(REMOVE,		remove,		removeres,	0),
-	PROC(RMDIR,		lookup,		wccstat,	0),
-	PROC(RENAME,		rename,		renameres,	0),
-	PROC(LINK,		link,		linkres,	0),
-	PROC(READDIR,		readdir,	readdirres,	3),
-	PROC(READDIRPLUS,	readdirplus,	readdirres,	3),
-	PROC(FSSTAT,		getattr,	fsstatres,	0),
-	PROC(FSINFO,		getattr,	fsinfores,	0),
-	PROC(PATHCONF,		getattr,	pathconfres,	0),
-	PROC(COMMIT,		commit,		commitres,	5),
+	PROC(GETATTR,		getattr,	getattr,	1),
+	PROC(SETATTR,		setattr,	setattr,	0),
+	PROC(LOOKUP,		lookup,		lookup,		2),
+	PROC(ACCESS,		access,		access,		1),
+	PROC(READLINK,		readlink,	readlink,	3),
+	PROC(READ,		read,		read,		3),
+	PROC(WRITE,		write,		write,		4),
+	PROC(CREATE,		create,		create,		0),
+	PROC(MKDIR,		mkdir,		create,		0),
+	PROC(SYMLINK,		symlink,	create,		0),
+	PROC(MKNOD,		mknod,		create,		0),
+	PROC(REMOVE,		remove,		remove,		0),
+	PROC(RMDIR,		lookup,		setattr,	0),
+	PROC(RENAME,		rename,		rename,		0),
+	PROC(LINK,		link,		link,		0),
+	PROC(READDIR,		readdir,	readdir,	3),
+	PROC(READDIRPLUS,	readdirplus,	readdir,	3),
+	PROC(FSSTAT,		getattr,	fsstat,		0),
+	PROC(FSINFO,		getattr,	fsinfo,		0),
+	PROC(PATHCONF,		getattr,	pathconf,	0),
+	PROC(COMMIT,		commit,		commit,		5),
 };
 
 struct rpc_version		nfs_version3 = {
@@ -3060,7 +3056,7 @@ static struct rpc_procinfo	nfs3_acl_procedures[] = {
 	[ACLPROC3_GETACL] = {
 		.p_proc = ACLPROC3_GETACL,
 		.p_encode = (kxdrproc_t)nfs3_xdr_enc_getacl3args,
-		.p_decode = (kxdrproc_t) nfs3_xdr_getaclres,
+		.p_decode = (kxdrproc_t)nfs3_xdr_dec_getacl3res,
 		.p_arglen = ACL3_getaclargs_sz,
 		.p_replen = ACL3_getaclres_sz,
 		.p_timer = 1,
@@ -3069,7 +3065,7 @@ static struct rpc_procinfo	nfs3_acl_procedures[] = {
 	[ACLPROC3_SETACL] = {
 		.p_proc = ACLPROC3_SETACL,
 		.p_encode = (kxdrproc_t)nfs3_xdr_enc_setacl3args,
-		.p_decode = (kxdrproc_t) nfs3_xdr_setaclres,
+		.p_decode = (kxdrproc_t)nfs3_xdr_dec_setacl3res,
 		.p_arglen = ACL3_setaclargs_sz,
 		.p_replen = ACL3_setaclres_sz,
 		.p_timer = 0,