Commit f63440ef authored by Len Brown's avatar Len Brown

Merge branch 'thinkpad' into release

parents 437f8c8a 59fe4fe3
......@@ -36,8 +36,6 @@ detailed description):
- Bluetooth enable and disable
- video output switching, expansion control
- ThinkLight on and off
- limited docking and undocking
- UltraBay eject
- CMOS/UCMS control
- LED control
- ACPI sounds
......@@ -729,131 +727,6 @@ cannot be read or if it is unknown, thinkpad-acpi will report it as "off".
It is impossible to know if the status returned through sysfs is valid.
Docking / undocking -- /proc/acpi/ibm/dock
------------------------------------------
Docking and undocking (e.g. with the X4 UltraBase) requires some
actions to be taken by the operating system to safely make or break
the electrical connections with the dock.
The docking feature of this driver generates the following ACPI events:
ibm/dock GDCK 00000003 00000001 -- eject request
ibm/dock GDCK 00000003 00000002 -- undocked
ibm/dock GDCK 00000000 00000003 -- docked
NOTE: These events will only be generated if the laptop was docked
when originally booted. This is due to the current lack of support for
hot plugging of devices in the Linux ACPI framework. If the laptop was
booted while not in the dock, the following message is shown in the
logs:
Mar 17 01:42:34 aero kernel: thinkpad_acpi: dock device not present
In this case, no dock-related events are generated but the dock and
undock commands described below still work. They can be executed
manually or triggered by Fn key combinations (see the example acpid
configuration files included in the driver tarball package available
on the web site).
When the eject request button on the dock is pressed, the first event
above is generated. The handler for this event should issue the
following command:
echo undock > /proc/acpi/ibm/dock
After the LED on the dock goes off, it is safe to eject the laptop.
Note: if you pressed this key by mistake, go ahead and eject the
laptop, then dock it back in. Otherwise, the dock may not function as
expected.
When the laptop is docked, the third event above is generated. The
handler for this event should issue the following command to fully
enable the dock:
echo dock > /proc/acpi/ibm/dock
The contents of the /proc/acpi/ibm/dock file shows the current status
of the dock, as provided by the ACPI framework.
The docking support in this driver does not take care of enabling or
disabling any other devices you may have attached to the dock. For
example, a CD drive plugged into the UltraBase needs to be disabled or
enabled separately. See the provided example acpid configuration files
for how this can be accomplished.
There is no support yet for PCI devices that may be attached to a
docking station, e.g. in the ThinkPad Dock II. The driver currently
does not recognize, enable or disable such devices. This means that
the only docking stations currently supported are the X-series
UltraBase docks and "dumb" port replicators like the Mini Dock (the
latter don't need any ACPI support, actually).
UltraBay eject -- /proc/acpi/ibm/bay
------------------------------------
Inserting or ejecting an UltraBay device requires some actions to be
taken by the operating system to safely make or break the electrical
connections with the device.
This feature generates the following ACPI events:
ibm/bay MSTR 00000003 00000000 -- eject request
ibm/bay MSTR 00000001 00000000 -- eject lever inserted
NOTE: These events will only be generated if the UltraBay was present
when the laptop was originally booted (on the X series, the UltraBay
is in the dock, so it may not be present if the laptop was undocked).
This is due to the current lack of support for hot plugging of devices
in the Linux ACPI framework. If the laptop was booted without the
UltraBay, the following message is shown in the logs:
Mar 17 01:42:34 aero kernel: thinkpad_acpi: bay device not present
In this case, no bay-related events are generated but the eject
command described below still works. It can be executed manually or
triggered by a hot key combination.
Sliding the eject lever generates the first event shown above. The
handler for this event should take whatever actions are necessary to
shut down the device in the UltraBay (e.g. call idectl), then issue
the following command:
echo eject > /proc/acpi/ibm/bay
After the LED on the UltraBay goes off, it is safe to pull out the
device.
When the eject lever is inserted, the second event above is
generated. The handler for this event should take whatever actions are
necessary to enable the UltraBay device (e.g. call idectl).
The contents of the /proc/acpi/ibm/bay file shows the current status
of the UltraBay, as provided by the ACPI framework.
EXPERIMENTAL warm eject support on the 600e/x, A22p and A3x (To use
this feature, you need to supply the experimental=1 parameter when
loading the module):
These models do not have a button near the UltraBay device to request
a hot eject but rather require the laptop to be put to sleep
(suspend-to-ram) before the bay device is ejected or inserted).
The sequence of steps to eject the device is as follows:
echo eject > /proc/acpi/ibm/bay
put the ThinkPad to sleep
remove the drive
resume from sleep
cat /proc/acpi/ibm/bay should show that the drive was removed
On the A3x, both the UltraBay 2000 and UltraBay Plus devices are
supported. Use "eject2" instead of "eject" for the second bay.
Note: the UltraBay eject support on the 600e/x, A22p and A3x is
EXPERIMENTAL and may not work as expected. USE WITH CAUTION!
CMOS/UCMS control
-----------------
......
......@@ -277,31 +277,6 @@ config THINKPAD_ACPI_UNSAFE_LEDS
Say N here, unless you are building a kernel for your own
use, and need to control the important firmware LEDs.
config THINKPAD_ACPI_DOCK
bool "Legacy Docking Station Support"
depends on THINKPAD_ACPI
depends on ACPI_DOCK=n
default n
---help---
Allows the thinkpad_acpi driver to handle docking station events.
This support was made obsolete by the generic ACPI docking station
support (CONFIG_ACPI_DOCK). It will allow locking and removing the
laptop from the docking station, but will not properly connect PCI
devices.
If you are not sure, say N here.
config THINKPAD_ACPI_BAY
bool "Legacy Removable Bay Support"
depends on THINKPAD_ACPI
default y
---help---
Allows the thinkpad_acpi driver to handle removable bays. It will
electrically disable the device in the bay, and also generate
notifications when the bay lever is ejected or inserted.
If you are not sure, say Y here.
config THINKPAD_ACPI_VIDEO
bool "Video output control support"
depends on THINKPAD_ACPI
......
......@@ -239,12 +239,6 @@ struct ibm_init_struct {
};
static struct {
#ifdef CONFIG_THINKPAD_ACPI_BAY
u32 bay_status:1;
u32 bay_eject:1;
u32 bay_status2:1;
u32 bay_eject2:1;
#endif
u32 bluetooth:1;
u32 hotkey:1;
u32 hotkey_mask:1;
......@@ -589,18 +583,6 @@ static int acpi_ec_write(int i, u8 v)
return 1;
}
#if defined(CONFIG_THINKPAD_ACPI_DOCK) || defined(CONFIG_THINKPAD_ACPI_BAY)
static int _sta(acpi_handle handle)
{
int status;
if (!handle || !acpi_evalf(handle, &status, "_STA", "d"))
status = 0;
return status;
}
#endif
static int issue_thinkpad_cmos_command(int cmos_cmd)
{
if (!cmos_handle)
......@@ -784,6 +766,8 @@ static int dispatch_procfs_write(struct file *file,
if (!ibm || !ibm->write)
return -EINVAL;
if (count > PAGE_SIZE - 2)
return -EINVAL;
kernbuf = kmalloc(count + 2, GFP_KERNEL);
if (!kernbuf)
......@@ -4441,293 +4425,6 @@ static struct ibm_struct light_driver_data = {
.exit = light_exit,
};
/*************************************************************************
* Dock subdriver
*/
#ifdef CONFIG_THINKPAD_ACPI_DOCK
static void dock_notify(struct ibm_struct *ibm, u32 event);
static int dock_read(char *p);
static int dock_write(char *buf);
TPACPI_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */
"\\_SB.PCI0.DOCK", /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */
"\\_SB.PCI0.PCI1.DOCK", /* all others */
"\\_SB.PCI.ISA.SLCE", /* 570 */
); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */
/* don't list other alternatives as we install a notify handler on the 570 */
TPACPI_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */
static const struct acpi_device_id ibm_pci_device_ids[] = {
{PCI_ROOT_HID_STRING, 0},
{"", 0},
};
static struct tp_acpi_drv_struct ibm_dock_acpidriver[2] = {
{
.notify = dock_notify,
.handle = &dock_handle,
.type = ACPI_SYSTEM_NOTIFY,
},
{
/* THIS ONE MUST NEVER BE USED FOR DRIVER AUTOLOADING.
* We just use it to get notifications of dock hotplug
* in very old thinkpads */
.hid = ibm_pci_device_ids,
.notify = dock_notify,
.handle = &pci_handle,
.type = ACPI_SYSTEM_NOTIFY,
},
};
static struct ibm_struct dock_driver_data[2] = {
{
.name = "dock",
.read = dock_read,
.write = dock_write,
.acpi = &ibm_dock_acpidriver[0],
},
{
.name = "dock",
.acpi = &ibm_dock_acpidriver[1],
},
};
#define dock_docked() (_sta(dock_handle) & 1)
static int __init dock_init(struct ibm_init_struct *iibm)
{
vdbg_printk(TPACPI_DBG_INIT, "initializing dock subdriver\n");
TPACPI_ACPIHANDLE_INIT(dock);
vdbg_printk(TPACPI_DBG_INIT, "dock is %s\n",
str_supported(dock_handle != NULL));
return (dock_handle)? 0 : 1;
}
static int __init dock_init2(struct ibm_init_struct *iibm)
{
int dock2_needed;
vdbg_printk(TPACPI_DBG_INIT, "initializing dock subdriver part 2\n");
if (dock_driver_data[0].flags.acpi_driver_registered &&
dock_driver_data[0].flags.acpi_notify_installed) {
TPACPI_ACPIHANDLE_INIT(pci);
dock2_needed = (pci_handle != NULL);
vdbg_printk(TPACPI_DBG_INIT,
"dock PCI handler for the TP 570 is %s\n",
str_supported(dock2_needed));
} else {
vdbg_printk(TPACPI_DBG_INIT,
"dock subdriver part 2 not required\n");
dock2_needed = 0;
}
return (dock2_needed)? 0 : 1;
}
static void dock_notify(struct ibm_struct *ibm, u32 event)
{
int docked = dock_docked();
int pci = ibm->acpi->hid && ibm->acpi->device &&
acpi_match_device_ids(ibm->acpi->device, ibm_pci_device_ids);
int data;
if (event == 1 && !pci) /* 570 */
data = 1; /* button */
else if (event == 1 && pci) /* 570 */
data = 3; /* dock */
else if (event == 3 && docked)
data = 1; /* button */
else if (event == 3 && !docked)
data = 2; /* undock */
else if (event == 0 && docked)
data = 3; /* dock */
else {
printk(TPACPI_ERR "unknown dock event %d, status %d\n",
event, _sta(dock_handle));
data = 0; /* unknown */
}
acpi_bus_generate_proc_event(ibm->acpi->device, event, data);
acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class,
dev_name(&ibm->acpi->device->dev),
event, data);
}
static int dock_read(char *p)
{
int len = 0;
int docked = dock_docked();
if (!dock_handle)
len += sprintf(p + len, "status:\t\tnot supported\n");
else if (!docked)
len += sprintf(p + len, "status:\t\tundocked\n");
else {
len += sprintf(p + len, "status:\t\tdocked\n");
len += sprintf(p + len, "commands:\tdock, undock\n");
}
return len;
}
static int dock_write(char *buf)
{
char *cmd;
if (!dock_docked())
return -ENODEV;
while ((cmd = next_cmd(&buf))) {
if (strlencmp(cmd, "undock") == 0) {
if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 0) ||
!acpi_evalf(dock_handle, NULL, "_EJ0", "vd", 1))
return -EIO;
} else if (strlencmp(cmd, "dock") == 0) {
if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 1))
return -EIO;
} else
return -EINVAL;
}
return 0;
}
#endif /* CONFIG_THINKPAD_ACPI_DOCK */
/*************************************************************************
* Bay subdriver
*/
#ifdef CONFIG_THINKPAD_ACPI_BAY
TPACPI_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */
"\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */
"\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */
"\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */
); /* A21e, R30, R31 */
TPACPI_HANDLE(bay_ej, bay, "_EJ3", /* 600e/x, A2xm/p, A3x */
"_EJ0", /* all others */
); /* 570,A21e,G4x,R30,R31,R32,R40e,R50e */
TPACPI_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV", /* A3x, R32 */
"\\_SB.PCI0.IDE0.IDEP.IDPS", /* 600e/x, 770e, 770x */
); /* all others */
TPACPI_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */
"_EJ0", /* 770x */
); /* all others */
static int __init bay_init(struct ibm_init_struct *iibm)
{
vdbg_printk(TPACPI_DBG_INIT, "initializing bay subdriver\n");
TPACPI_ACPIHANDLE_INIT(bay);
if (bay_handle)
TPACPI_ACPIHANDLE_INIT(bay_ej);
TPACPI_ACPIHANDLE_INIT(bay2);
if (bay2_handle)
TPACPI_ACPIHANDLE_INIT(bay2_ej);
tp_features.bay_status = bay_handle &&
acpi_evalf(bay_handle, NULL, "_STA", "qv");
tp_features.bay_status2 = bay2_handle &&
acpi_evalf(bay2_handle, NULL, "_STA", "qv");
tp_features.bay_eject = bay_handle && bay_ej_handle &&
(strlencmp(bay_ej_path, "_EJ0") == 0 || experimental);
tp_features.bay_eject2 = bay2_handle && bay2_ej_handle &&
(strlencmp(bay2_ej_path, "_EJ0") == 0 || experimental);
vdbg_printk(TPACPI_DBG_INIT,
"bay 1: status %s, eject %s; bay 2: status %s, eject %s\n",
str_supported(tp_features.bay_status),
str_supported(tp_features.bay_eject),
str_supported(tp_features.bay_status2),
str_supported(tp_features.bay_eject2));
return (tp_features.bay_status || tp_features.bay_eject ||
tp_features.bay_status2 || tp_features.bay_eject2)? 0 : 1;
}
static void bay_notify(struct ibm_struct *ibm, u32 event)
{
acpi_bus_generate_proc_event(ibm->acpi->device, event, 0);
acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class,
dev_name(&ibm->acpi->device->dev),
event, 0);
}
#define bay_occupied(b) (_sta(b##_handle) & 1)
static int bay_read(char *p)
{
int len = 0;
int occupied = bay_occupied(bay);
int occupied2 = bay_occupied(bay2);
int eject, eject2;
len += sprintf(p + len, "status:\t\t%s\n",
tp_features.bay_status ?
(occupied ? "occupied" : "unoccupied") :
"not supported");
if (tp_features.bay_status2)
len += sprintf(p + len, "status2:\t%s\n", occupied2 ?
"occupied" : "unoccupied");
eject = tp_features.bay_eject && occupied;
eject2 = tp_features.bay_eject2 && occupied2;
if (eject && eject2)
len += sprintf(p + len, "commands:\teject, eject2\n");
else if (eject)
len += sprintf(p + len, "commands:\teject\n");
else if (eject2)
len += sprintf(p + len, "commands:\teject2\n");
return len;
}
static int bay_write(char *buf)
{
char *cmd;
if (!tp_features.bay_eject && !tp_features.bay_eject2)
return -ENODEV;
while ((cmd = next_cmd(&buf))) {
if (tp_features.bay_eject && strlencmp(cmd, "eject") == 0) {
if (!acpi_evalf(bay_ej_handle, NULL, NULL, "vd", 1))
return -EIO;
} else if (tp_features.bay_eject2 &&
strlencmp(cmd, "eject2") == 0) {
if (!acpi_evalf(bay2_ej_handle, NULL, NULL, "vd", 1))
return -EIO;
} else
return -EINVAL;
}
return 0;
}
static struct tp_acpi_drv_struct ibm_bay_acpidriver = {
.notify = bay_notify,
.handle = &bay_handle,
.type = ACPI_SYSTEM_NOTIFY,
};
static struct ibm_struct bay_driver_data = {
.name = "bay",
.read = bay_read,
.write = bay_write,
.acpi = &ibm_bay_acpidriver,
};
#endif /* CONFIG_THINKPAD_ACPI_BAY */
/*************************************************************************
* CMOS subdriver
*/
......@@ -5945,14 +5642,48 @@ static struct backlight_ops ibm_backlight_data = {
/* --------------------------------------------------------------------- */
/*
* These are only useful for models that have only one possibility
* of GPU. If the BIOS model handles both ATI and Intel, don't use
* these quirks.
*/
#define TPACPI_BRGHT_Q_NOEC 0x0001 /* Must NOT use EC HBRV */
#define TPACPI_BRGHT_Q_EC 0x0002 /* Should or must use EC HBRV */
#define TPACPI_BRGHT_Q_ASK 0x8000 /* Ask for user report */
static const struct tpacpi_quirk brightness_quirk_table[] __initconst = {
/* Models with ATI GPUs known to require ECNVRAM mode */
TPACPI_Q_IBM('1', 'Y', TPACPI_BRGHT_Q_EC), /* T43/p ATI */
/* Models with ATI GPUs (waiting confirmation) */
TPACPI_Q_IBM('1', 'R', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
TPACPI_Q_IBM('1', 'Q', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
TPACPI_Q_IBM('7', '6', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
TPACPI_Q_IBM('7', '8', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
/* Models with Intel Extreme Graphics 2 (waiting confirmation) */
TPACPI_Q_IBM('1', 'V', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
TPACPI_Q_IBM('1', 'W', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
TPACPI_Q_IBM('1', 'U', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
/* Models with Intel GMA900 */
TPACPI_Q_IBM('7', '0', TPACPI_BRGHT_Q_NOEC), /* T43, R52 */
TPACPI_Q_IBM('7', '4', TPACPI_BRGHT_Q_NOEC), /* X41 */
TPACPI_Q_IBM('7', '5', TPACPI_BRGHT_Q_NOEC), /* X41 Tablet */
};
static int __init brightness_init(struct ibm_init_struct *iibm)
{
int b;
unsigned long quirks;
vdbg_printk(TPACPI_DBG_INIT, "initializing brightness subdriver\n");
mutex_init(&brightness_mutex);
quirks = tpacpi_check_quirks(brightness_quirk_table,
ARRAY_SIZE(brightness_quirk_table));
/*
* We always attempt to detect acpi support, so as to switch
* Lenovo Vista BIOS to ACPI brightness mode even if we are not
......@@ -6009,23 +5740,13 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
/* TPACPI_BRGHT_MODE_AUTO not implemented yet, just use default */
if (brightness_mode == TPACPI_BRGHT_MODE_AUTO ||
brightness_mode == TPACPI_BRGHT_MODE_MAX) {
if (thinkpad_id.vendor == PCI_VENDOR_ID_IBM) {
/*
* IBM models that define HBRV probably have
* EC-based backlight level control
*/
if (acpi_evalf(ec_handle, NULL, "HBRV", "qd"))
/* T40-T43, R50-R52, R50e, R51e, X31-X41 */
if (quirks & TPACPI_BRGHT_Q_EC)
brightness_mode = TPACPI_BRGHT_MODE_ECNVRAM;
else
/* all other IBM ThinkPads */
brightness_mode = TPACPI_BRGHT_MODE_UCMS_STEP;
} else
/* All Lenovo ThinkPads */
brightness_mode = TPACPI_BRGHT_MODE_UCMS_STEP;
dbg_printk(TPACPI_DBG_BRGHT,
"selected brightness_mode=%d\n",
"driver auto-selected brightness_mode=%d\n",
brightness_mode);
}
......@@ -6052,6 +5773,15 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_BRGHT,
"brightness is supported\n");
if (quirks & TPACPI_BRGHT_Q_ASK) {
printk(TPACPI_NOTICE
"brightness: will use unverified default: "
"brightness_mode=%d\n", brightness_mode);
printk(TPACPI_NOTICE
"brightness: please report to %s whether it works well "
"or not on your ThinkPad\n", TPACPI_MAIL);
}
ibm_backlight_device->props.max_brightness =
(tp_features.bright_16levels)? 15 : 7;
ibm_backlight_device->props.brightness = b & TP_EC_BACKLIGHT_LVLMSK;
......@@ -7854,22 +7584,6 @@ static struct ibm_init_struct ibms_init[] __initdata = {
.init = light_init,
.data = &light_driver_data,
},
#ifdef CONFIG_THINKPAD_ACPI_DOCK
{
.init = dock_init,
.data = &dock_driver_data[0],
},
{
.init = dock_init2,
.data = &dock_driver_data[1],
},
#endif
#ifdef CONFIG_THINKPAD_ACPI_BAY
{
.init = bay_init,
.data = &bay_driver_data,
},
#endif
{
.init = cmos_init,
.data = &cmos_driver_data,
......@@ -7968,12 +7682,6 @@ TPACPI_PARAM(hotkey);
TPACPI_PARAM(bluetooth);
TPACPI_PARAM(video);
TPACPI_PARAM(light);
#ifdef CONFIG_THINKPAD_ACPI_DOCK
TPACPI_PARAM(dock);
#endif
#ifdef CONFIG_THINKPAD_ACPI_BAY
TPACPI_PARAM(bay);
#endif /* CONFIG_THINKPAD_ACPI_BAY */
TPACPI_PARAM(cmos);
TPACPI_PARAM(led);
TPACPI_PARAM(beep);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment