Merge tag 'chrome-platform-for-linus-4.17' of...

Merge tag 'chrome-platform-for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform

Pull chrome platform updates from Benson Leung:

 - a series from Dmitry to remove platform data from chromeos_laptop.c,
   which was the only user of platform data for the atmel_mxt_ts driver.

 - a series to clean up sysfs and debugfs for cros_ec

 - other misc cleanups

* tag 'chrome-platform-for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: (22 commits)
  platform/chrome: mfd/cros_ec_dev: Add sysfs entry to set keyboard wake lid angle
  platform/chrome: cros_ec_debugfs: Add PD port info to debugfs
  platform/chrome: cros_ec_debugfs: Use octal permissions '0444'
  platform/chrome: cros_ec_sysfs: use permission-specific DEVICE_ATTR variants
  platform/chrome: cros_ec_sysfs: introduce to_cros_ec_dev define.
  platform/chrome: cros_ec_sysfs: Modify error handling
  platform/chrome: cros_ec_lpc: Add support for Google devices using custom coreboot firmware
  platform/chrome: cros_ec_lpc: wake up from s2idle on Chrome EC
  Input: atmel_mxt_ts - remove platform data support
  platform/chrome: chromeos_laptop - discard data for unneeded boards
  platform/chrome: chromeos_laptop - use device properties for Pixel
  platform/chrome: chromeos_laptop - rely on I2C to set up interrupt trigger
  platform/chrome: chromeos_laptop - use I2C notifier to create devices
  platform/chrome: chromeos_laptop - parse DMI IRQ data once
  platform/chrome: chromeos_laptop - rework i2c peripherals initialization
  platform/chrome: chromeos_laptop - factor out getting IRQ from DMI
  platform/chrome: chromeos_laptop - introduce pr_fmt()
  platform/chrome: chromeos_laptop - stop setting suspend mode for Atmel devices
  platform/chrome: chromeos_laptop - add SPDX identifier
  Input: atmel_mxt_ts - switch ChromeOS ACPI devices to generic props
  ...

MAINTAINERS

@@ -2426,7 +2426,6 @@ T:	git git://github.com/ndyer/linux.git
 S:	Maintained
 F:	Documentation/devicetree/bindings/input/atmel,maxtouch.txt
 F:	drivers/input/touchscreen/atmel_mxt_ts.c
-F:	include/linux/platform_data/atmel_mxt_ts.h
 
 ATMEL SAMA5D2 ADC DRIVER
 M:	Ludovic Desroches <ludovic.desroches@microchip.com>

drivers/input/touchscreen/atmel_mxt_ts.c

@@ -23,12 +23,13 @@
 #include <linux/delay.h>
 #include <linux/firmware.h>
 #include <linux/i2c.h>
-#include <linux/platform_data/atmel_mxt_ts.h>
 #include <linux/input/mt.h>
 #include <linux/interrupt.h>
 #include <linux/of.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 #include <linux/gpio/consumer.h>
+#include <linux/property.h>
 #include <asm/unaligned.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
@@ -268,12 +269,16 @@ static const struct v4l2_file_operations mxt_video_fops = {
 	.poll = vb2_fop_poll,
 };
 
+enum mxt_suspend_mode {
+	MXT_SUSPEND_DEEP_SLEEP	= 0,
+	MXT_SUSPEND_T9_CTRL	= 1,
+};
+
 /* Each client has this additional data */
 struct mxt_data {
 	struct i2c_client *client;
 	struct input_dev *input_dev;
 	char phys[64];		/* device physical location */
-	const struct mxt_platform_data *pdata;
 	struct mxt_object *object_table;
 	struct mxt_info info;
 	unsigned int irq;
@@ -324,6 +329,11 @@ struct mxt_data {
 
 	/* for config update handling */
 	struct completion crc_completion;
+
+	u32 *t19_keymap;
+	unsigned int t19_num_keys;
+
+	enum mxt_suspend_mode suspend_mode;
 };
 
 struct mxt_vb2_buffer {
@@ -742,15 +752,14 @@ static int mxt_write_object(struct mxt_data *data,
 static void mxt_input_button(struct mxt_data *data, u8 *message)
 {
 	struct input_dev *input = data->input_dev;
-	const struct mxt_platform_data *pdata = data->pdata;
 	int i;
 
-	for (i = 0; i < pdata->t19_num_keys; i++) {
-		if (pdata->t19_keymap[i] == KEY_RESERVED)
+	for (i = 0; i < data->t19_num_keys; i++) {
+		if (data->t19_keymap[i] == KEY_RESERVED)
 			continue;
 
 		/* Active-low switch */
-		input_report_key(input, pdata->t19_keymap[i],
+		input_report_key(input, data->t19_keymap[i],
 				 !(message[1] & BIT(i)));
 	}
 }
@@ -758,7 +767,7 @@ static void mxt_input_button(struct mxt_data *data, u8 *message)
 static void mxt_input_sync(struct mxt_data *data)
 {
 	input_mt_report_pointer_emulation(data->input_dev,
-					  data->pdata->t19_num_keys);
+					  data->t19_num_keys);
 	input_sync(data->input_dev);
 }
 
@@ -1858,7 +1867,6 @@ static void mxt_input_close(struct input_dev *dev);
 static void mxt_set_up_as_touchpad(struct input_dev *input_dev,
 				   struct mxt_data *data)
 {
-	const struct mxt_platform_data *pdata = data->pdata;
 	int i;
 
 	input_dev->name = "Atmel maXTouch Touchpad";
@@ -1872,15 +1880,14 @@ static void mxt_set_up_as_touchpad(struct input_dev *input_dev,
 	input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
 			  MXT_PIXELS_PER_MM);
 
-	for (i = 0; i < pdata->t19_num_keys; i++)
-		if (pdata->t19_keymap[i] != KEY_RESERVED)
+	for (i = 0; i < data->t19_num_keys; i++)
+		if (data->t19_keymap[i] != KEY_RESERVED)
 			input_set_capability(input_dev, EV_KEY,
-					     pdata->t19_keymap[i]);
+					     data->t19_keymap[i]);
 }
 
 static int mxt_initialize_input_device(struct mxt_data *data)
 {
-	const struct mxt_platform_data *pdata = data->pdata;
 	struct device *dev = &data->client->dev;
 	struct input_dev *input_dev;
 	int error;
@@ -1946,7 +1953,7 @@ static int mxt_initialize_input_device(struct mxt_data *data)
 	}
 
 	/* If device has buttons we assume it is a touchpad */
-	if (pdata->t19_num_keys) {
+	if (data->t19_num_keys) {
 		mxt_set_up_as_touchpad(input_dev, data);
 		mt_flags |= INPUT_MT_POINTER;
 	} else {
@@ -2868,7 +2875,7 @@ static const struct attribute_group mxt_attr_group = {
 
 static void mxt_start(struct mxt_data *data)
 {
-	switch (data->pdata->suspend_mode) {
+	switch (data->suspend_mode) {
 	case MXT_SUSPEND_T9_CTRL:
 		mxt_soft_reset(data);
 
@@ -2886,12 +2893,11 @@ static void mxt_start(struct mxt_data *data)
 		mxt_t6_command(data, MXT_COMMAND_CALIBRATE, 1, false);
 		break;
 	}
-
 }
 
 static void mxt_stop(struct mxt_data *data)
 {
-	switch (data->pdata->suspend_mode) {
+	switch (data->suspend_mode) {
 	case MXT_SUSPEND_T9_CTRL:
 		/* Touch disable */
 		mxt_write_object(data,
@@ -2921,55 +2927,49 @@ static void mxt_input_close(struct input_dev *dev)
 	mxt_stop(data);
 }
 
-#ifdef CONFIG_OF
-static const struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
+static int mxt_parse_device_properties(struct mxt_data *data)
 {
-	struct mxt_platform_data *pdata;
-	struct device_node *np = client->dev.of_node;
+	static const char keymap_property[] = "linux,gpio-keymap";
+	struct device *dev = &data->client->dev;
 	u32 *keymap;
-	int proplen, ret;
-
-	if (!np)
-		return ERR_PTR(-ENOENT);
-
-	pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
-	if (!pdata)
-		return ERR_PTR(-ENOMEM);
+	int n_keys;
+	int error;
 
-	if (of_find_property(np, "linux,gpio-keymap", &proplen)) {
-		pdata->t19_num_keys = proplen / sizeof(u32);
+	if (device_property_present(dev, keymap_property)) {
+		n_keys = device_property_read_u32_array(dev, keymap_property,
+							NULL, 0);
+		if (n_keys <= 0) {
+			error = n_keys < 0 ? n_keys : -EINVAL;
+			dev_err(dev, "invalid/malformed '%s' property: %d\n",
+				keymap_property, error);
+			return error;
+		}
 
-		keymap = devm_kzalloc(&client->dev,
-				pdata->t19_num_keys * sizeof(keymap[0]),
-				GFP_KERNEL);
+		keymap = devm_kmalloc_array(dev, n_keys, sizeof(*keymap),
+					    GFP_KERNEL);
 		if (!keymap)
-			return ERR_PTR(-ENOMEM);
+			return -ENOMEM;
 
-		ret = of_property_read_u32_array(np, "linux,gpio-keymap",
-						 keymap, pdata->t19_num_keys);
-		if (ret)
-			dev_warn(&client->dev,
-				 "Couldn't read linux,gpio-keymap: %d\n", ret);
+		error = device_property_read_u32_array(dev, keymap_property,
+						       keymap, n_keys);
+		if (error) {
+			dev_err(dev, "failed to parse '%s' property: %d\n",
+				keymap_property, error);
+			return error;
+		}
 
-		pdata->t19_keymap = keymap;
+		data->t19_keymap = keymap;
+		data->t19_num_keys = n_keys;
 	}
 
-	pdata->suspend_mode = MXT_SUSPEND_DEEP_SLEEP;
-
-	return pdata;
-}
-#else
-static const struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
-{
-	return ERR_PTR(-ENOENT);
+	return 0;
 }
-#endif
 
 #ifdef CONFIG_ACPI
 
 struct mxt_acpi_platform_data {
 	const char *hid;
-	struct mxt_platform_data pdata;
+	const struct property_entry *props;
 };
 
 static unsigned int samus_touchpad_buttons[] = {
@@ -2979,14 +2979,16 @@ static unsigned int samus_touchpad_buttons[] = {
 	BTN_LEFT
 };
 
+static const struct property_entry samus_touchpad_props[] = {
+	PROPERTY_ENTRY_U32_ARRAY("linux,gpio-keymap", samus_touchpad_buttons),
+	{ }
+};
+
 static struct mxt_acpi_platform_data samus_platform_data[] = {
 	{
 		/* Touchpad */
 		.hid	= "ATML0000",
-		.pdata	= {
-			.t19_num_keys	= ARRAY_SIZE(samus_touchpad_buttons),
-			.t19_keymap	= samus_touchpad_buttons,
-		},
+		.props	= samus_touchpad_props,
 	},
 	{
 		/* Touchscreen */
@@ -3004,14 +3006,16 @@ static unsigned int chromebook_tp_buttons[] = {
 	BTN_LEFT
 };
 
+static const struct property_entry chromebook_tp_props[] = {
+	PROPERTY_ENTRY_U32_ARRAY("linux,gpio-keymap", chromebook_tp_buttons),
+	{ }
+};
+
 static struct mxt_acpi_platform_data chromebook_platform_data[] = {
 	{
 		/* Touchpad */
 		.hid	= "ATML0000",
-		.pdata	= {
-			.t19_num_keys	= ARRAY_SIZE(chromebook_tp_buttons),
-			.t19_keymap	= chromebook_tp_buttons,
-		},
+		.props	= chromebook_tp_props,
 	},
 	{
 		/* Touchscreen */
@@ -3041,83 +3045,85 @@ static const struct dmi_system_id mxt_dmi_table[] = {
 	{ }
 };
 
-static const struct mxt_platform_data *mxt_parse_acpi(struct i2c_client *client)
+static int mxt_prepare_acpi_properties(struct i2c_client *client)
 {
 	struct acpi_device *adev;
 	const struct dmi_system_id *system_id;
 	const struct mxt_acpi_platform_data *acpi_pdata;
 
-	/*
-	 * Ignore ACPI devices representing bootloader mode.
-	 *
-	 * This is a bit of a hack: Google Chromebook BIOS creates ACPI
-	 * devices for both application and bootloader modes, but we are
-	 * interested in application mode only (if device is in bootloader
-	 * mode we'll end up switching into application anyway). So far
-	 * application mode addresses were all above 0x40, so we'll use it
-	 * as a threshold.
-	 */
-	if (client->addr < 0x40)
-		return ERR_PTR(-ENXIO);
-
 	adev = ACPI_COMPANION(&client->dev);
 	if (!adev)
-		return ERR_PTR(-ENOENT);
+		return -ENOENT;
 
 	system_id = dmi_first_match(mxt_dmi_table);
 	if (!system_id)
-		return ERR_PTR(-ENOENT);
+		return -ENOENT;
 
 	acpi_pdata = system_id->driver_data;
 	if (!acpi_pdata)
-		return ERR_PTR(-ENOENT);
+		return -ENOENT;
 
 	while (acpi_pdata->hid) {
-		if (!strcmp(acpi_device_hid(adev), acpi_pdata->hid))
-			return &acpi_pdata->pdata;
+		if (!strcmp(acpi_device_hid(adev), acpi_pdata->hid)) {
+			/*
+			 * Remove previously installed properties if we
+			 * are probing this device not for the very first
+			 * time.
+			 */
+			device_remove_properties(&client->dev);
+
+			/*
+			 * Now install the platform-specific properties
+			 * that are missing from ACPI.
+			 */
+			device_add_properties(&client->dev, acpi_pdata->props);
+			break;
+		}
 
 		acpi_pdata++;
 	}
 
-	return ERR_PTR(-ENOENT);
+	return 0;
 }
 #else
-static const struct mxt_platform_data *mxt_parse_acpi(struct i2c_client *client)
+static int mxt_prepare_acpi_properties(struct i2c_client *client)
 {
-	return ERR_PTR(-ENOENT);
+	return -ENOENT;
 }
 #endif
 
-static const struct mxt_platform_data *
-mxt_get_platform_data(struct i2c_client *client)
-{
-	const struct mxt_platform_data *pdata;
-
-	pdata = dev_get_platdata(&client->dev);
-	if (pdata)
-		return pdata;
-
-	pdata = mxt_parse_dt(client);
-	if (!IS_ERR(pdata) || PTR_ERR(pdata) != -ENOENT)
-		return pdata;
-
-	pdata = mxt_parse_acpi(client);
-	if (!IS_ERR(pdata) || PTR_ERR(pdata) != -ENOENT)
-		return pdata;
-
-	dev_err(&client->dev, "No platform data specified\n");
-	return ERR_PTR(-EINVAL);
-}
+static const struct dmi_system_id chromebook_T9_suspend_dmi[] = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Link"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "Peppy"),
+		},
+	},
+	{ }
+};
 
 static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
 	struct mxt_data *data;
-	const struct mxt_platform_data *pdata;
 	int error;
 
-	pdata = mxt_get_platform_data(client);
-	if (IS_ERR(pdata))
-		return PTR_ERR(pdata);
+	/*
+	 * Ignore ACPI devices representing bootloader mode.
+	 *
+	 * This is a bit of a hack: Google Chromebook BIOS creates ACPI
+	 * devices for both application and bootloader modes, but we are
+	 * interested in application mode only (if device is in bootloader
+	 * mode we'll end up switching into application anyway). So far
+	 * application mode addresses were all above 0x40, so we'll use it
+	 * as a threshold.
+	 */
+	if (ACPI_COMPANION(&client->dev) && client->addr < 0x40)
+		return -ENXIO;
 
 	data = devm_kzalloc(&client->dev, sizeof(struct mxt_data), GFP_KERNEL);
 	if (!data)
@@ -3127,7 +3133,6 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		 client->adapter->nr, client->addr);
 
 	data->client = client;
-	data->pdata = pdata;
 	data->irq = client->irq;
 	i2c_set_clientdata(client, data);
 
@@ -3135,6 +3140,17 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	init_completion(&data->reset_completion);
 	init_completion(&data->crc_completion);
 
+	data->suspend_mode = dmi_check_system(chromebook_T9_suspend_dmi) ?
+		MXT_SUSPEND_T9_CTRL : MXT_SUSPEND_DEEP_SLEEP;
+
+	error = mxt_prepare_acpi_properties(client);
+	if (error && error != -ENOENT)
+		return error;
+
+	error = mxt_parse_device_properties(data);
+	if (error)
+		return error;
+
 	data->reset_gpio = devm_gpiod_get_optional(&client->dev,
 						   "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(data->reset_gpio)) {
@@ -3144,8 +3160,7 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	}
 
 	error = devm_request_threaded_irq(&client->dev, client->irq,
-					  NULL, mxt_interrupt,
-					  pdata->irqflags | IRQF_ONESHOT,
+					  NULL, mxt_interrupt, IRQF_ONESHOT,
 					  client->name, data);
 	if (error) {
 		dev_err(&client->dev, "Failed to register interrupt\n");
@@ -3265,7 +3280,7 @@ MODULE_DEVICE_TABLE(i2c, mxt_id);
 static struct i2c_driver mxt_driver = {
 	.driver = {
 		.name	= "atmel_mxt_ts",
-		.of_match_table = of_match_ptr(mxt_of_match),
+		.of_match_table = mxt_of_match,
 		.acpi_match_table = ACPI_PTR(mxt_acpi_id),
 		.pm	= &mxt_pm_ops,
 	},

drivers/mfd/cros_ec_dev.c

@@ -305,8 +305,8 @@ static void cros_ec_sensors_register(struct cros_ec_dev *ec)
 
 	resp = (struct ec_response_motion_sense *)msg->data;
 	sensor_num = resp->dump.sensor_count;
-	/* Allocate 2 extra sensors in case lid angle or FIFO are needed */
-	sensor_cells = kzalloc(sizeof(struct mfd_cell) * (sensor_num + 2),
+	/* Allocate 1 extra sensors in FIFO are needed */
+	sensor_cells = kzalloc(sizeof(struct mfd_cell) * (sensor_num + 1),
 			       GFP_KERNEL);
 	if (sensor_cells == NULL)
 		goto error;
@@ -362,16 +362,10 @@ static void cros_ec_sensors_register(struct cros_ec_dev *ec)
 		sensor_type[resp->info.type]++;
 		id++;
 	}
-	if (sensor_type[MOTIONSENSE_TYPE_ACCEL] >= 2) {
-		sensor_platforms[id].sensor_num = sensor_num;
 
-		sensor_cells[id].name = "cros-ec-angle";
-		sensor_cells[id].id = 0;
-		sensor_cells[id].platform_data = &sensor_platforms[id];
-		sensor_cells[id].pdata_size =
-			sizeof(struct cros_ec_sensor_platform);
-		id++;
-	}
+	if (sensor_type[MOTIONSENSE_TYPE_ACCEL] >= 2)
+		ec->has_kb_wake_angle = true;
+
 	if (cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE_FIFO)) {
 		sensor_cells[id].name = "cros-ec-ring";
 		id++;
@@ -424,6 +418,14 @@ static int ec_device_probe(struct platform_device *pdev)
 		goto failed;
 	}
 
+	/* check whether this EC is a sensor hub. */
+	if (cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE))
+		cros_ec_sensors_register(ec);
+
+	/* Take control of the lightbar from the EC. */
+	lb_manual_suspend_ctrl(ec, 1);
+
+	/* We can now add the sysfs class, we know which parameter to show */
 	retval = cdev_device_add(&ec->cdev, &ec->class_dev);
 	if (retval) {
 		dev_err(dev, "cdev_device_add failed => %d\n", retval);
@@ -433,13 +435,6 @@ static int ec_device_probe(struct platform_device *pdev)
 	if (cros_ec_debugfs_init(ec))
 		dev_warn(dev, "failed to create debugfs directory\n");
 
-	/* check whether this EC is a sensor hub. */
-	if (cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE))
-		cros_ec_sensors_register(ec);
-
-	/* Take control of the lightbar from the EC. */
-	lb_manual_suspend_ctrl(ec, 1);
-
 	return 0;
 
 failed:

drivers/platform/chrome/chromeos_laptop.c

-/*
- *  chromeos_laptop.c - Driver to instantiate Chromebook i2c/smbus devices.
- *
- *  Author : Benson Leung <bleung@chromium.org>
- *
- *  Copyright (C) 2012 Google, Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
+// SPDX-License-Identifier: GPL-2.0+
+// Driver to instantiate Chromebook i2c/smbus devices.
+//
+// Copyright (C) 2012 Google, Inc.
+// Author: Benson Leung <bleung@chromium.org>
+
+#define pr_fmt(fmt)		KBUILD_MODNAME ": " fmt
 
 #include <linux/dmi.h>
 #include <linux/i2c.h>
-#include <linux/platform_data/atmel_mxt_ts.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
+#include <linux/ioport.h>
 #include <linux/module.h>
+#include <linux/pci.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 
 #define ATMEL_TP_I2C_ADDR	0x4b
 #define ATMEL_TP_I2C_BL_ADDR	0x25
@@ -38,18 +25,11 @@
 #define ISL_ALS_I2C_ADDR	0x44
 #define TAOS_ALS_I2C_ADDR	0x29
 
-#define MAX_I2C_DEVICE_DEFERRALS	5
-
-static struct i2c_client *als;
-static struct i2c_client *tp;
-static struct i2c_client *ts;
-
 static const char *i2c_adapter_names[] = {
 	"SMBus I801 adapter",
 	"i915 gmbus vga",
 	"i915 gmbus panel",
 	"Synopsys DesignWare I2C adapter",
-	"Synopsys DesignWare I2C adapter",
 };
 
 /* Keep this enum consistent with i2c_adapter_names */
@@ -57,126 +37,41 @@ enum i2c_adapter_type {
 	I2C_ADAPTER_SMBUS = 0,
 	I2C_ADAPTER_VGADDC,
 	I2C_ADAPTER_PANEL,
-	I2C_ADAPTER_DESIGNWARE_0,
-	I2C_ADAPTER_DESIGNWARE_1,
-};
-
-enum i2c_peripheral_state {
-	UNPROBED = 0,
-	PROBED,
-	TIMEDOUT,
+	I2C_ADAPTER_DESIGNWARE,
 };
 
 struct i2c_peripheral {
-	int (*add)(enum i2c_adapter_type type);
-	enum i2c_adapter_type type;
-	enum i2c_peripheral_state state;
-	int tries;
-};
-
-#define MAX_I2C_PERIPHERALS 4
+	struct i2c_board_info board_info;
+	unsigned short alt_addr;
 
-struct chromeos_laptop {
-	struct i2c_peripheral i2c_peripherals[MAX_I2C_PERIPHERALS];
-};
-
-static struct chromeos_laptop *cros_laptop;
-
-static struct i2c_board_info cyapa_device = {
-	I2C_BOARD_INFO("cyapa", CYAPA_TP_I2C_ADDR),
-	.flags		= I2C_CLIENT_WAKE,
-};
+	const char *dmi_name;
+	unsigned long irqflags;
+	struct resource irq_resource;
 
-static struct i2c_board_info elantech_device = {
-	I2C_BOARD_INFO("elan_i2c", ELAN_TP_I2C_ADDR),
-	.flags		= I2C_CLIENT_WAKE,
-};
-
-static struct i2c_board_info isl_als_device = {
-	I2C_BOARD_INFO("isl29018", ISL_ALS_I2C_ADDR),
-};
-
-static struct i2c_board_info tsl2583_als_device = {
-	I2C_BOARD_INFO("tsl2583", TAOS_ALS_I2C_ADDR),
-};
-
-static struct i2c_board_info tsl2563_als_device = {
-	I2C_BOARD_INFO("tsl2563", TAOS_ALS_I2C_ADDR),
-};
-
-static int mxt_t19_keys[] = {
-	KEY_RESERVED,
-	KEY_RESERVED,
-	KEY_RESERVED,
-	KEY_RESERVED,
-	KEY_RESERVED,
-	BTN_LEFT
-};
-
-static struct mxt_platform_data atmel_224s_tp_platform_data = {
-	.irqflags		= IRQF_TRIGGER_FALLING,
-	.t19_num_keys		= ARRAY_SIZE(mxt_t19_keys),
-	.t19_keymap		= mxt_t19_keys,
-	.suspend_mode		= MXT_SUSPEND_T9_CTRL,
-};
+	enum i2c_adapter_type type;
+	u32 pci_devid;
 
-static struct i2c_board_info atmel_224s_tp_device = {
-	I2C_BOARD_INFO("atmel_mxt_tp", ATMEL_TP_I2C_ADDR),
-	.platform_data = &atmel_224s_tp_platform_data,
-	.flags		= I2C_CLIENT_WAKE,
+	struct i2c_client *client;
 };
 
-static struct mxt_platform_data atmel_1664s_platform_data = {
-	.irqflags		= IRQF_TRIGGER_FALLING,
-	.suspend_mode		= MXT_SUSPEND_T9_CTRL,
+struct chromeos_laptop {
+	/*
+	 * Note that we can't mark this pointer as const because
+	 * i2c_new_probed_device() changes passed in I2C board info, so.
+	 */
+	struct i2c_peripheral *i2c_peripherals;
+	unsigned int num_i2c_peripherals;
 };
 
-static struct i2c_board_info atmel_1664s_device = {
-	I2C_BOARD_INFO("atmel_mxt_ts", ATMEL_TS_I2C_ADDR),
-	.platform_data = &atmel_1664s_platform_data,
-	.flags		= I2C_CLIENT_WAKE,
-};
+static const struct chromeos_laptop *cros_laptop;
 
-static struct i2c_client *__add_probed_i2c_device(
-		const char *name,
-		int bus,
-		struct i2c_board_info *info,
-		const unsigned short *alt_addr_list)
+static struct i2c_client *
+chromes_laptop_instantiate_i2c_device(struct i2c_adapter *adapter,
+				      struct i2c_board_info *info,
+				      unsigned short alt_addr)
 {
-	const struct dmi_device *dmi_dev;
-	const struct dmi_dev_onboard *dev_data;
-	struct i2c_adapter *adapter;
-	struct i2c_client *client = NULL;
 	const unsigned short addr_list[] = { info->addr, I2C_CLIENT_END };
-
-	if (bus < 0)
-		return NULL;
-	/*
-	 * If a name is specified, look for irq platform information stashed
-	 * in DMI_DEV_TYPE_DEV_ONBOARD by the Chrome OS custom system firmware.
-	 */
-	if (name) {
-		dmi_dev = dmi_find_device(DMI_DEV_TYPE_DEV_ONBOARD, name, NULL);
-		if (!dmi_dev) {
-			pr_err("%s failed to dmi find device %s.\n",
-			       __func__,
-			       name);
-			return NULL;
-		}
-		dev_data = (struct dmi_dev_onboard *)dmi_dev->device_data;
-		if (!dev_data) {
-			pr_err("%s failed to get data from dmi for %s.\n",
-			       __func__, name);
-			return NULL;
-		}
-		info->irq = dev_data->instance;
-	}
-
-	adapter = i2c_get_adapter(bus);
-	if (!adapter) {
-		pr_err("%s failed to get i2c adapter %d.\n", __func__, bus);
-		return NULL;
-	}
+	struct i2c_client *client;
 
 	/*
 	 * Add the i2c device. If we can't detect it at the primary
@@ -184,339 +79,345 @@ static struct i2c_client *__add_probed_i2c_device(
 	 * structure gets assigned primary address.
 	 */
 	client = i2c_new_probed_device(adapter, info, addr_list, NULL);
-	if (!client && alt_addr_list) {
+	if (!client && alt_addr) {
 		struct i2c_board_info dummy_info = {
 			I2C_BOARD_INFO("dummy", info->addr),
 		};
+		const unsigned short alt_addr_list[] = {
+			alt_addr, I2C_CLIENT_END
+		};
 		struct i2c_client *dummy;
 
 		dummy = i2c_new_probed_device(adapter, &dummy_info,
 					      alt_addr_list, NULL);
 		if (dummy) {
-			pr_debug("%s %d-%02x is probed at %02x\n",
-				  __func__, bus, info->addr, dummy->addr);
+			pr_debug("%d-%02x is probed at %02x\n",
+				 adapter->nr, info->addr, dummy->addr);
 			i2c_unregister_device(dummy);
 			client = i2c_new_device(adapter, info);
 		}
 	}
 
 	if (!client)
-		pr_notice("%s failed to register device %d-%02x\n",
-			  __func__, bus, info->addr);
+		pr_debug("failed to register device %d-%02x\n",
+			 adapter->nr, info->addr);
 	else
-		pr_debug("%s added i2c device %d-%02x\n",
-			 __func__, bus, info->addr);
+		pr_debug("added i2c device %d-%02x\n",
+			 adapter->nr, info->addr);
 
-	i2c_put_adapter(adapter);
 	return client;
 }
 
-struct i2c_lookup {
-	const char *name;
-	int instance;
-	int n;
-};
-
-static int __find_i2c_adap(struct device *dev, void *data)
-{
-	struct i2c_lookup *lookup = data;
-	static const char *prefix = "i2c-";
-	struct i2c_adapter *adapter;
-
-	if (strncmp(dev_name(dev), prefix, strlen(prefix)) != 0)
-		return 0;
-	adapter = to_i2c_adapter(dev);
-	if (strncmp(adapter->name, lookup->name, strlen(lookup->name)) == 0 &&
-	    lookup->n++ == lookup->instance)
-		return 1;
-	return 0;
-}
-
-static int find_i2c_adapter_num(enum i2c_adapter_type type)
-{
-	struct device *dev = NULL;
-	struct i2c_adapter *adapter;
-	struct i2c_lookup lookup;
-
-	memset(&lookup, 0, sizeof(lookup));
-	lookup.name = i2c_adapter_names[type];
-	lookup.instance = (type == I2C_ADAPTER_DESIGNWARE_1) ? 1 : 0;
-
-	/* find the adapter by name */
-	dev = bus_find_device(&i2c_bus_type, NULL, &lookup, __find_i2c_adap);
-	if (!dev) {
-		/* Adapters may appear later. Deferred probing will retry */
-		pr_notice("%s: i2c adapter %s not found on system.\n", __func__,
-			  lookup.name);
-		return -ENODEV;
-	}
-	adapter = to_i2c_adapter(dev);
-	return adapter->nr;
-}
-
-/*
- * Takes a list of addresses in addrs as such :
- * { addr1, ... , addrn, I2C_CLIENT_END };
- * add_probed_i2c_device will use i2c_new_probed_device
- * and probe for devices at all of the addresses listed.
- * Returns NULL if no devices found.
- * See Documentation/i2c/instantiating-devices for more information.
- */
-static struct i2c_client *add_probed_i2c_device(
-		const char *name,
-		enum i2c_adapter_type type,
-		struct i2c_board_info *info,
-		const unsigned short *addrs)
+static bool chromeos_laptop_match_adapter_devid(struct device *dev, u32 devid)
 {
-	return __add_probed_i2c_device(name,
-				       find_i2c_adapter_num(type),
-				       info,
-				       addrs);
-}
+	struct pci_dev *pdev;
 
-/*
- * Probes for a device at a single address, the one provided by
- * info->addr.
- * Returns NULL if no device found.
- */
-static struct i2c_client *add_i2c_device(const char *name,
-						enum i2c_adapter_type type,
-						struct i2c_board_info *info)
-{
-	return __add_probed_i2c_device(name,
-				       find_i2c_adapter_num(type),
-				       info,
-				       NULL);
-}
-
-static int setup_cyapa_tp(enum i2c_adapter_type type)
-{
-	if (tp)
-		return 0;
+	if (!dev_is_pci(dev))
+		return false;
 
-	/* add cyapa touchpad */
-	tp = add_i2c_device("trackpad", type, &cyapa_device);
-	return (!tp) ? -EAGAIN : 0;
+	pdev = to_pci_dev(dev);
+	return devid == PCI_DEVID(pdev->bus->number, pdev->devfn);
 }
 
-static int setup_atmel_224s_tp(enum i2c_adapter_type type)
+static void chromeos_laptop_check_adapter(struct i2c_adapter *adapter)
 {
-	const unsigned short addr_list[] = { ATMEL_TP_I2C_BL_ADDR,
-					     I2C_CLIENT_END };
-	if (tp)
-		return 0;
-
-	/* add atmel mxt touchpad */
-	tp = add_probed_i2c_device("trackpad", type,
-				   &atmel_224s_tp_device, addr_list);
-	return (!tp) ? -EAGAIN : 0;
-}
+	struct i2c_peripheral *i2c_dev;
+	int i;
 
-static int setup_elantech_tp(enum i2c_adapter_type type)
-{
-	if (tp)
-		return 0;
+	for (i = 0; i < cros_laptop->num_i2c_peripherals; i++) {
+		i2c_dev = &cros_laptop->i2c_peripherals[i];
 
-	/* add elantech touchpad */
-	tp = add_i2c_device("trackpad", type, &elantech_device);
-	return (!tp) ? -EAGAIN : 0;
-}
+		/* Skip devices already created */
+		if (i2c_dev->client)
+			continue;
 
-static int setup_atmel_1664s_ts(enum i2c_adapter_type type)
-{
-	const unsigned short addr_list[] = { ATMEL_TS_I2C_BL_ADDR,
-					     I2C_CLIENT_END };
-	if (ts)
-		return 0;
-
-	/* add atmel mxt touch device */
-	ts = add_probed_i2c_device("touchscreen", type,
-				   &atmel_1664s_device, addr_list);
-	return (!ts) ? -EAGAIN : 0;
-}
+		if (strncmp(adapter->name, i2c_adapter_names[i2c_dev->type],
+			    strlen(i2c_adapter_names[i2c_dev->type])))
+			continue;
 
-static int setup_isl29018_als(enum i2c_adapter_type type)
-{
-	if (als)
-		return 0;
+		if (i2c_dev->pci_devid &&
+		    !chromeos_laptop_match_adapter_devid(adapter->dev.parent,
+							 i2c_dev->pci_devid)) {
+			continue;
+		}
 
-	/* add isl29018 light sensor */
-	als = add_i2c_device("lightsensor", type, &isl_als_device);
-	return (!als) ? -EAGAIN : 0;
+		i2c_dev->client =
+			chromes_laptop_instantiate_i2c_device(adapter,
+							&i2c_dev->board_info,
+							i2c_dev->alt_addr);
+	}
 }
 
-static int setup_tsl2583_als(enum i2c_adapter_type type)
+static void chromeos_laptop_detach_i2c_client(struct i2c_client *client)
 {
-	if (als)
-		return 0;
-
-	/* add tsl2583 light sensor */
-	als = add_i2c_device(NULL, type, &tsl2583_als_device);
-	return (!als) ? -EAGAIN : 0;
-}
+	struct i2c_peripheral *i2c_dev;
+	int i;
 
-static int setup_tsl2563_als(enum i2c_adapter_type type)
-{
-	if (als)
-		return 0;
+	for (i = 0; i < cros_laptop->num_i2c_peripherals; i++) {
+		i2c_dev = &cros_laptop->i2c_peripherals[i];
 
-	/* add tsl2563 light sensor */
-	als = add_i2c_device(NULL, type, &tsl2563_als_device);
-	return (!als) ? -EAGAIN : 0;
+		if (i2c_dev->client == client)
+			i2c_dev->client = NULL;
+	}
 }
 
-static int __init chromeos_laptop_dmi_matched(const struct dmi_system_id *id)
+static int chromeos_laptop_i2c_notifier_call(struct notifier_block *nb,
+					     unsigned long action, void *data)
 {
-	cros_laptop = (void *)id->driver_data;
-	pr_debug("DMI Matched %s.\n", id->ident);
+	struct device *dev = data;
+
+	switch (action) {
+	case BUS_NOTIFY_ADD_DEVICE:
+		if (dev->type == &i2c_adapter_type)
+			chromeos_laptop_check_adapter(to_i2c_adapter(dev));
+		break;
+
+	case BUS_NOTIFY_REMOVED_DEVICE:
+		if (dev->type == &i2c_client_type)
+			chromeos_laptop_detach_i2c_client(to_i2c_client(dev));
+		break;
+	}
 
-	/* Indicate to dmi_scan that processing is done. */
-	return 1;
+	return 0;
 }
 
-static int chromeos_laptop_probe(struct platform_device *pdev)
-{
-	int i;
-	int ret = 0;
-
-	for (i = 0; i < MAX_I2C_PERIPHERALS; i++) {
-		struct i2c_peripheral *i2c_dev;
-
-		i2c_dev = &cros_laptop->i2c_peripherals[i];
-
-		/* No more peripherals. */
-		if (i2c_dev->add == NULL)
-			break;
-
-		if (i2c_dev->state == TIMEDOUT || i2c_dev->state == PROBED)
-			continue;
-
-		/*
-		 * Check that the i2c adapter is present.
-		 * -EPROBE_DEFER if missing as the adapter may appear much
-		 * later.
-		 */
-		if (find_i2c_adapter_num(i2c_dev->type) == -ENODEV) {
-			ret = -EPROBE_DEFER;
-			continue;
-		}
-
-		/* Add the device. */
-		if (i2c_dev->add(i2c_dev->type) == -EAGAIN) {
-			/*
-			 * Set -EPROBE_DEFER a limited num of times
-			 * if device is not successfully added.
-			 */
-			if (++i2c_dev->tries < MAX_I2C_DEVICE_DEFERRALS) {
-				ret = -EPROBE_DEFER;
-			} else {
-				/* Ran out of tries. */
-				pr_notice("%s: Ran out of tries for device.\n",
-					  __func__);
-				i2c_dev->state = TIMEDOUT;
-			}
-		} else {
-			i2c_dev->state = PROBED;
-		}
-	}
+static struct notifier_block chromeos_laptop_i2c_notifier = {
+	.notifier_call = chromeos_laptop_i2c_notifier_call,
+};
 
-	return ret;
+#define DECLARE_CROS_LAPTOP(_name)					\
+static const struct chromeos_laptop _name __initconst = {		\
+	.i2c_peripherals	= _name##_peripherals,			\
+	.num_i2c_peripherals	= ARRAY_SIZE(_name##_peripherals),	\
 }
 
-static struct chromeos_laptop samsung_series_5_550 = {
-	.i2c_peripherals = {
-		/* Touchpad. */
-		{ .add = setup_cyapa_tp, I2C_ADAPTER_SMBUS },
-		/* Light Sensor. */
-		{ .add = setup_isl29018_als, I2C_ADAPTER_SMBUS },
+static struct i2c_peripheral samsung_series_5_550_peripherals[] __initdata = {
+	/* Touchpad. */
+	{
+		.board_info	= {
+			I2C_BOARD_INFO("cyapa", CYAPA_TP_I2C_ADDR),
+			.flags		= I2C_CLIENT_WAKE,
+		},
+		.dmi_name	= "trackpad",
+		.type		= I2C_ADAPTER_SMBUS,
+	},
+	/* Light Sensor. */
+	{
+		.board_info	= {
+			I2C_BOARD_INFO("isl29018", ISL_ALS_I2C_ADDR),
+		},
+		.dmi_name	= "lightsensor",
+		.type		= I2C_ADAPTER_SMBUS,
 	},
 };
+DECLARE_CROS_LAPTOP(samsung_series_5_550);
 
-static struct chromeos_laptop samsung_series_5 = {
-	.i2c_peripherals = {
-		/* Light Sensor. */
-		{ .add = setup_tsl2583_als, I2C_ADAPTER_SMBUS },
+static struct i2c_peripheral samsung_series_5_peripherals[] __initdata = {
+	/* Light Sensor. */
+	{
+		.board_info	= {
+			I2C_BOARD_INFO("tsl2583", TAOS_ALS_I2C_ADDR),
+		},
+		.type		= I2C_ADAPTER_SMBUS,
 	},
 };
+DECLARE_CROS_LAPTOP(samsung_series_5);
 
-static struct chromeos_laptop chromebook_pixel = {
-	.i2c_peripherals = {
-		/* Touch Screen. */
-		{ .add = setup_atmel_1664s_ts, I2C_ADAPTER_PANEL },
-		/* Touchpad. */
-		{ .add = setup_atmel_224s_tp, I2C_ADAPTER_VGADDC },
-		/* Light Sensor. */
-		{ .add = setup_isl29018_als, I2C_ADAPTER_PANEL },
-	},
+static const int chromebook_pixel_tp_keys[] __initconst = {
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	BTN_LEFT
 };
 
-static struct chromeos_laptop hp_chromebook_14 = {
-	.i2c_peripherals = {
-		/* Touchpad. */
-		{ .add = setup_cyapa_tp, I2C_ADAPTER_DESIGNWARE_0 },
+static const struct property_entry
+chromebook_pixel_trackpad_props[] __initconst = {
+	PROPERTY_ENTRY_U32_ARRAY("linux,gpio-keymap", chromebook_pixel_tp_keys),
+	{ }
+};
+
+static struct i2c_peripheral chromebook_pixel_peripherals[] __initdata = {
+	/* Touch Screen. */
+	{
+		.board_info	= {
+			I2C_BOARD_INFO("atmel_mxt_ts",
+					ATMEL_TS_I2C_ADDR),
+			.flags		= I2C_CLIENT_WAKE,
+		},
+		.dmi_name	= "touchscreen",
+		.irqflags	= IRQF_TRIGGER_FALLING,
+		.type		= I2C_ADAPTER_PANEL,
+		.alt_addr	= ATMEL_TS_I2C_BL_ADDR,
+	},
+	/* Touchpad. */
+	{
+		.board_info	= {
+			I2C_BOARD_INFO("atmel_mxt_tp",
+					ATMEL_TP_I2C_ADDR),
+			.properties	=
+				chromebook_pixel_trackpad_props,
+			.flags		= I2C_CLIENT_WAKE,
+		},
+		.dmi_name	= "trackpad",
+		.irqflags	= IRQF_TRIGGER_FALLING,
+		.type		= I2C_ADAPTER_VGADDC,
+		.alt_addr	= ATMEL_TP_I2C_BL_ADDR,
+	},
+	/* Light Sensor. */
+	{
+		.board_info	= {
+			I2C_BOARD_INFO("isl29018", ISL_ALS_I2C_ADDR),
+		},
+		.dmi_name	= "lightsensor",
+		.type		= I2C_ADAPTER_PANEL,
 	},
 };
+DECLARE_CROS_LAPTOP(chromebook_pixel);
 
-static struct chromeos_laptop dell_chromebook_11 = {
-	.i2c_peripherals = {
-		/* Touchpad. */
-		{ .add = setup_cyapa_tp, I2C_ADAPTER_DESIGNWARE_0 },
-		/* Elan Touchpad option. */
-		{ .add = setup_elantech_tp, I2C_ADAPTER_DESIGNWARE_0 },
+static struct i2c_peripheral hp_chromebook_14_peripherals[] __initdata = {
+	/* Touchpad. */
+	{
+		.board_info	= {
+			I2C_BOARD_INFO("cyapa", CYAPA_TP_I2C_ADDR),
+			.flags		= I2C_CLIENT_WAKE,
+		},
+		.dmi_name	= "trackpad",
+		.type		= I2C_ADAPTER_DESIGNWARE,
 	},
 };
+DECLARE_CROS_LAPTOP(hp_chromebook_14);
 
-static struct chromeos_laptop toshiba_cb35 = {
-	.i2c_peripherals = {
-		/* Touchpad. */
-		{ .add = setup_cyapa_tp, I2C_ADAPTER_DESIGNWARE_0 },
+static struct i2c_peripheral dell_chromebook_11_peripherals[] __initdata = {
+	/* Touchpad. */
+	{
+		.board_info	= {
+			I2C_BOARD_INFO("cyapa", CYAPA_TP_I2C_ADDR),
+			.flags		= I2C_CLIENT_WAKE,
+		},
+		.dmi_name	= "trackpad",
+		.type		= I2C_ADAPTER_DESIGNWARE,
+	},
+	/* Elan Touchpad option. */
+	{
+		.board_info	= {
+			I2C_BOARD_INFO("elan_i2c", ELAN_TP_I2C_ADDR),
+			.flags		= I2C_CLIENT_WAKE,
+		},
+		.dmi_name	= "trackpad",
+		.type		= I2C_ADAPTER_DESIGNWARE,
 	},
 };
+DECLARE_CROS_LAPTOP(dell_chromebook_11);
 
-static struct chromeos_laptop acer_c7_chromebook = {
-	.i2c_peripherals = {
-		/* Touchpad. */
-		{ .add = setup_cyapa_tp, I2C_ADAPTER_SMBUS },
+static struct i2c_peripheral toshiba_cb35_peripherals[] __initdata = {
+	/* Touchpad. */
+	{
+		.board_info	= {
+			I2C_BOARD_INFO("cyapa", CYAPA_TP_I2C_ADDR),
+			.flags		= I2C_CLIENT_WAKE,
+		},
+		.dmi_name	= "trackpad",
+		.type		= I2C_ADAPTER_DESIGNWARE,
 	},
 };
+DECLARE_CROS_LAPTOP(toshiba_cb35);
 
-static struct chromeos_laptop acer_ac700 = {
-	.i2c_peripherals = {
-		/* Light Sensor. */
-		{ .add = setup_tsl2563_als, I2C_ADAPTER_SMBUS },
+static struct i2c_peripheral acer_c7_chromebook_peripherals[] __initdata = {
+	/* Touchpad. */
+	{
+		.board_info	= {
+			I2C_BOARD_INFO("cyapa", CYAPA_TP_I2C_ADDR),
+			.flags		= I2C_CLIENT_WAKE,
+		},
+		.dmi_name	= "trackpad",
+		.type		= I2C_ADAPTER_SMBUS,
 	},
 };
+DECLARE_CROS_LAPTOP(acer_c7_chromebook);
 
-static struct chromeos_laptop acer_c720 = {
-	.i2c_peripherals = {
-		/* Touchscreen. */
-		{ .add = setup_atmel_1664s_ts, I2C_ADAPTER_DESIGNWARE_1 },
-		/* Touchpad. */
-		{ .add = setup_cyapa_tp, I2C_ADAPTER_DESIGNWARE_0 },
-		/* Elan Touchpad option. */
-		{ .add = setup_elantech_tp, I2C_ADAPTER_DESIGNWARE_0 },
-		/* Light Sensor. */
-		{ .add = setup_isl29018_als, I2C_ADAPTER_DESIGNWARE_1 },
+static struct i2c_peripheral acer_ac700_peripherals[] __initdata = {
+	/* Light Sensor. */
+	{
+		.board_info	= {
+			I2C_BOARD_INFO("tsl2583", TAOS_ALS_I2C_ADDR),
+		},
+		.type		= I2C_ADAPTER_SMBUS,
 	},
 };
+DECLARE_CROS_LAPTOP(acer_ac700);
 
-static struct chromeos_laptop hp_pavilion_14_chromebook = {
-	.i2c_peripherals = {
-		/* Touchpad. */
-		{ .add = setup_cyapa_tp, I2C_ADAPTER_SMBUS },
+static struct i2c_peripheral acer_c720_peripherals[] __initdata = {
+	/* Touchscreen. */
+	{
+		.board_info	= {
+			I2C_BOARD_INFO("atmel_mxt_ts",
+					ATMEL_TS_I2C_ADDR),
+			.flags		= I2C_CLIENT_WAKE,
+		},
+		.dmi_name	= "touchscreen",
+		.irqflags	= IRQF_TRIGGER_FALLING,
+		.type		= I2C_ADAPTER_DESIGNWARE,
+		.pci_devid	= PCI_DEVID(0, PCI_DEVFN(0x15, 0x2)),
+		.alt_addr	= ATMEL_TS_I2C_BL_ADDR,
+	},
+	/* Touchpad. */
+	{
+		.board_info	= {
+			I2C_BOARD_INFO("cyapa", CYAPA_TP_I2C_ADDR),
+			.flags		= I2C_CLIENT_WAKE,
+		},
+		.dmi_name	= "trackpad",
+		.type		= I2C_ADAPTER_DESIGNWARE,
+		.pci_devid	= PCI_DEVID(0, PCI_DEVFN(0x15, 0x1)),
+	},
+	/* Elan Touchpad option. */
+	{
+		.board_info	= {
+			I2C_BOARD_INFO("elan_i2c", ELAN_TP_I2C_ADDR),
+			.flags		= I2C_CLIENT_WAKE,
+		},
+		.dmi_name	= "trackpad",
+		.type		= I2C_ADAPTER_DESIGNWARE,
+		.pci_devid	= PCI_DEVID(0, PCI_DEVFN(0x15, 0x1)),
+	},
+	/* Light Sensor. */
+	{
+		.board_info	= {
+			I2C_BOARD_INFO("isl29018", ISL_ALS_I2C_ADDR),
+		},
+		.dmi_name	= "lightsensor",
+		.type		= I2C_ADAPTER_DESIGNWARE,
+		.pci_devid	= PCI_DEVID(0, PCI_DEVFN(0x15, 0x2)),
 	},
 };
+DECLARE_CROS_LAPTOP(acer_c720);
 
-static struct chromeos_laptop cr48 = {
-	.i2c_peripherals = {
-		/* Light Sensor. */
-		{ .add = setup_tsl2563_als, I2C_ADAPTER_SMBUS },
+static struct i2c_peripheral
+hp_pavilion_14_chromebook_peripherals[] __initdata = {
+	/* Touchpad. */
+	{
+		.board_info	= {
+			I2C_BOARD_INFO("cyapa", CYAPA_TP_I2C_ADDR),
+			.flags		= I2C_CLIENT_WAKE,
+		},
+		.dmi_name	= "trackpad",
+		.type		= I2C_ADAPTER_SMBUS,
 	},
 };
+DECLARE_CROS_LAPTOP(hp_pavilion_14_chromebook);
 
-#define _CBDD(board_) \
-	.callback = chromeos_laptop_dmi_matched, \
-	.driver_data = (void *)&board_
+static struct i2c_peripheral cr48_peripherals[] __initdata = {
+	/* Light Sensor. */
+	{
+		.board_info	= {
+			I2C_BOARD_INFO("tsl2563", TAOS_ALS_I2C_ADDR),
+		},
+		.type		= I2C_ADAPTER_SMBUS,
+	},
+};
+DECLARE_CROS_LAPTOP(cr48);
 
 static const struct dmi_system_id chromeos_laptop_dmi_table[] __initconst = {
 	{
@@ -525,14 +426,14 @@ static const struct dmi_system_id chromeos_laptop_dmi_table[] __initconst = {
 			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Lumpy"),
 		},
-		_CBDD(samsung_series_5_550),
+		.driver_data = (void *)&samsung_series_5_550,
 	},
 	{
 		.ident = "Samsung Series 5",
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Alex"),
 		},
-		_CBDD(samsung_series_5),
+		.driver_data = (void *)&samsung_series_5,
 	},
 	{
 		.ident = "Chromebook Pixel",
@@ -540,7 +441,7 @@ static const struct dmi_system_id chromeos_laptop_dmi_table[] __initconst = {
 			DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Link"),
 		},
-		_CBDD(chromebook_pixel),
+		.driver_data = (void *)&chromebook_pixel,
 	},
 	{
 		.ident = "Wolf",
@@ -548,7 +449,7 @@ static const struct dmi_system_id chromeos_laptop_dmi_table[] __initconst = {
 			DMI_MATCH(DMI_BIOS_VENDOR, "coreboot"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Wolf"),
 		},
-		_CBDD(dell_chromebook_11),
+		.driver_data = (void *)&dell_chromebook_11,
 	},
 	{
 		.ident = "HP Chromebook 14",
@@ -556,7 +457,7 @@ static const struct dmi_system_id chromeos_laptop_dmi_table[] __initconst = {
 			DMI_MATCH(DMI_BIOS_VENDOR, "coreboot"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Falco"),
 		},
-		_CBDD(hp_chromebook_14),
+		.driver_data = (void *)&hp_chromebook_14,
 	},
 	{
 		.ident = "Toshiba CB35",
@@ -564,99 +465,214 @@ static const struct dmi_system_id chromeos_laptop_dmi_table[] __initconst = {
 			DMI_MATCH(DMI_BIOS_VENDOR, "coreboot"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Leon"),
 		},
-		_CBDD(toshiba_cb35),
+		.driver_data = (void *)&toshiba_cb35,
 	},
 	{
 		.ident = "Acer C7 Chromebook",
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Parrot"),
 		},
-		_CBDD(acer_c7_chromebook),
+		.driver_data = (void *)&acer_c7_chromebook,
 	},
 	{
 		.ident = "Acer AC700",
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"),
 		},
-		_CBDD(acer_ac700),
+		.driver_data = (void *)&acer_ac700,
 	},
 	{
 		.ident = "Acer C720",
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Peppy"),
 		},
-		_CBDD(acer_c720),
+		.driver_data = (void *)&acer_c720,
 	},
 	{
 		.ident = "HP Pavilion 14 Chromebook",
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Butterfly"),
 		},
-		_CBDD(hp_pavilion_14_chromebook),
+		.driver_data = (void *)&hp_pavilion_14_chromebook,
 	},
 	{
 		.ident = "Cr-48",
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Mario"),
 		},
-		_CBDD(cr48),
+		.driver_data = (void *)&cr48,
 	},
 	{ }
 };
 MODULE_DEVICE_TABLE(dmi, chromeos_laptop_dmi_table);
 
-static struct platform_device *cros_platform_device;
+static int __init chromeos_laptop_scan_adapter(struct device *dev, void *data)
+{
+	struct i2c_adapter *adapter;
 
-static struct platform_driver cros_platform_driver = {
-	.driver = {
-		.name = "chromeos_laptop",
-	},
-	.probe = chromeos_laptop_probe,
-};
+	adapter = i2c_verify_adapter(dev);
+	if (adapter)
+		chromeos_laptop_check_adapter(adapter);
+
+	return 0;
+}
+
+static int __init chromeos_laptop_get_irq_from_dmi(const char *dmi_name)
+{
+	const struct dmi_device *dmi_dev;
+	const struct dmi_dev_onboard *dev_data;
+
+	dmi_dev = dmi_find_device(DMI_DEV_TYPE_DEV_ONBOARD, dmi_name, NULL);
+	if (!dmi_dev) {
+		pr_err("failed to find DMI device '%s'\n", dmi_name);
+		return -ENOENT;
+	}
+
+	dev_data = dmi_dev->device_data;
+	if (!dev_data) {
+		pr_err("failed to get data from DMI for '%s'\n", dmi_name);
+		return -EINVAL;
+	}
+
+	return dev_data->instance;
+}
+
+static int __init chromeos_laptop_setup_irq(struct i2c_peripheral *i2c_dev)
+{
+	int irq;
+
+	if (i2c_dev->dmi_name) {
+		irq = chromeos_laptop_get_irq_from_dmi(i2c_dev->dmi_name);
+		if (irq < 0)
+			return irq;
+
+		i2c_dev->irq_resource  = (struct resource)
+			DEFINE_RES_NAMED(irq, 1, NULL,
+					 IORESOURCE_IRQ | i2c_dev->irqflags);
+		i2c_dev->board_info.resources = &i2c_dev->irq_resource;
+		i2c_dev->board_info.num_resources = 1;
+	}
+
+	return 0;
+}
+
+static struct chromeos_laptop * __init
+chromeos_laptop_prepare(const struct chromeos_laptop *src)
+{
+	struct chromeos_laptop *cros_laptop;
+	struct i2c_peripheral *i2c_dev;
+	struct i2c_board_info *info;
+	int error;
+	int i;
+
+	cros_laptop = kzalloc(sizeof(*cros_laptop), GFP_KERNEL);
+	if (!cros_laptop)
+		return ERR_PTR(-ENOMEM);
+
+	cros_laptop->i2c_peripherals = kmemdup(src->i2c_peripherals,
+					       src->num_i2c_peripherals *
+						sizeof(*src->i2c_peripherals),
+					       GFP_KERNEL);
+	if (!cros_laptop->i2c_peripherals) {
+		error = -ENOMEM;
+		goto err_free_cros_laptop;
+	}
+
+	cros_laptop->num_i2c_peripherals = src->num_i2c_peripherals;
+
+	for (i = 0; i < cros_laptop->num_i2c_peripherals; i++) {
+		i2c_dev = &cros_laptop->i2c_peripherals[i];
+		info = &i2c_dev->board_info;
+
+		error = chromeos_laptop_setup_irq(i2c_dev);
+		if (error)
+			goto err_destroy_cros_peripherals;
+
+		/* We need to deep-copy properties */
+		if (info->properties) {
+			info->properties =
+				property_entries_dup(info->properties);
+			if (IS_ERR(info->properties)) {
+				error = PTR_ERR(info->properties);
+				goto err_destroy_cros_peripherals;
+			}
+		}
+	}
+
+	return cros_laptop;
+
+err_destroy_cros_peripherals:
+	while (--i >= 0) {
+		i2c_dev = &cros_laptop->i2c_peripherals[i];
+		info = &i2c_dev->board_info;
+		if (info->properties)
+			property_entries_free(info->properties);
+	}
+	kfree(cros_laptop->i2c_peripherals);
+err_free_cros_laptop:
+	kfree(cros_laptop);
+	return ERR_PTR(error);
+}
+
+static void chromeos_laptop_destroy(const struct chromeos_laptop *cros_laptop)
+{
+	struct i2c_peripheral *i2c_dev;
+	struct i2c_board_info *info;
+	int i;
+
+	for (i = 0; i < cros_laptop->num_i2c_peripherals; i++) {
+		i2c_dev = &cros_laptop->i2c_peripherals[i];
+		info = &i2c_dev->board_info;
+
+		if (i2c_dev->client)
+			i2c_unregister_device(i2c_dev->client);
+
+		if (info->properties)
+			property_entries_free(info->properties);
+	}
+
+	kfree(cros_laptop->i2c_peripherals);
+	kfree(cros_laptop);
+}
 
 static int __init chromeos_laptop_init(void)
 {
-	int ret;
+	const struct dmi_system_id *dmi_id;
+	int error;
 
-	if (!dmi_check_system(chromeos_laptop_dmi_table)) {
-		pr_debug("%s unsupported system.\n", __func__);
+	dmi_id = dmi_first_match(chromeos_laptop_dmi_table);
+	if (!dmi_id) {
+		pr_debug("unsupported system\n");
 		return -ENODEV;
 	}
 
-	ret = platform_driver_register(&cros_platform_driver);
-	if (ret)
-		return ret;
+	pr_debug("DMI Matched %s\n", dmi_id->ident);
+
+	cros_laptop = chromeos_laptop_prepare((void *)dmi_id->driver_data);
+	if (IS_ERR(cros_laptop))
+		return PTR_ERR(cros_laptop);
 
-	cros_platform_device = platform_device_alloc("chromeos_laptop", -1);
-	if (!cros_platform_device) {
-		ret = -ENOMEM;
-		goto fail_platform_device1;
+	error = bus_register_notifier(&i2c_bus_type,
+				      &chromeos_laptop_i2c_notifier);
+	if (error) {
+		pr_err("failed to register i2c bus notifier: %d\n", error);
+		chromeos_laptop_destroy(cros_laptop);
+		return error;
 	}
 
-	ret = platform_device_add(cros_platform_device);
-	if (ret)
-		goto fail_platform_device2;
+	/*
+	 * Scan adapters that have been registered before we installed
+	 * the notifier to make sure we do not miss any devices.
+	 */
+	i2c_for_each_dev(NULL, chromeos_laptop_scan_adapter);
 
 	return 0;
-
-fail_platform_device2:
-	platform_device_put(cros_platform_device);
-fail_platform_device1:
-	platform_driver_unregister(&cros_platform_driver);
-	return ret;
 }
 
 static void __exit chromeos_laptop_exit(void)
 {
-	if (als)
-		i2c_unregister_device(als);
-	if (tp)
-		i2c_unregister_device(tp);
-	if (ts)
-		i2c_unregister_device(ts);
-
-	platform_device_unregister(cros_platform_device);
-	platform_driver_unregister(&cros_platform_driver);
+	bus_unregister_notifier(&i2c_bus_type, &chromeos_laptop_i2c_notifier);
+	chromeos_laptop_destroy(cros_laptop);
 }
 
 module_init(chromeos_laptop_init);

drivers/platform/chrome/cros_ec_debugfs.c

@@ -211,6 +211,58 @@ static int cros_ec_console_log_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
+static ssize_t cros_ec_pdinfo_read(struct file *file,
+				   char __user *user_buf,
+				   size_t count,
+				   loff_t *ppos)
+{
+	char read_buf[EC_USB_PD_MAX_PORTS * 40], *p = read_buf;
+	struct cros_ec_debugfs *debug_info = file->private_data;
+	struct cros_ec_device *ec_dev = debug_info->ec->ec_dev;
+	struct {
+		struct cros_ec_command msg;
+		union {
+			struct ec_response_usb_pd_control_v1 resp;
+			struct ec_params_usb_pd_control params;
+		};
+	} __packed ec_buf;
+	struct cros_ec_command *msg;
+	struct ec_response_usb_pd_control_v1 *resp;
+	struct ec_params_usb_pd_control *params;
+	int i;
+
+	msg = &ec_buf.msg;
+	params = (struct ec_params_usb_pd_control *)msg->data;
+	resp = (struct ec_response_usb_pd_control_v1 *)msg->data;
+
+	msg->command = EC_CMD_USB_PD_CONTROL;
+	msg->version = 1;
+	msg->insize = sizeof(*resp);
+	msg->outsize = sizeof(*params);
+
+	/*
+	 * Read status from all PD ports until failure, typically caused
+	 * by attempting to read status on a port that doesn't exist.
+	 */
+	for (i = 0; i < EC_USB_PD_MAX_PORTS; ++i) {
+		params->port = i;
+		params->role = 0;
+		params->mux = 0;
+		params->swap = 0;
+
+		if (cros_ec_cmd_xfer_status(ec_dev, msg) < 0)
+			break;
+
+		p += scnprintf(p, sizeof(read_buf) + read_buf - p,
+			       "p%d: %s en:%.2x role:%.2x pol:%.2x\n", i,
+			       resp->state, resp->enabled, resp->role,
+			       resp->polarity);
+	}
+
+	return simple_read_from_buffer(user_buf, count, ppos,
+				       read_buf, p - read_buf);
+}
+
 const struct file_operations cros_ec_console_log_fops = {
 	.owner = THIS_MODULE,
 	.open = cros_ec_console_log_open,
@@ -220,6 +272,13 @@ const struct file_operations cros_ec_console_log_fops = {
 	.release = cros_ec_console_log_release,
 };
 
+const struct file_operations cros_ec_pdinfo_fops = {
+	.owner = THIS_MODULE,
+	.open = simple_open,
+	.read = cros_ec_pdinfo_read,
+	.llseek = default_llseek,
+};
+
 static int ec_read_version_supported(struct cros_ec_dev *ec)
 {
 	struct ec_params_get_cmd_versions_v1 *params;
@@ -288,7 +347,7 @@ static int cros_ec_create_console_log(struct cros_ec_debugfs *debug_info)
 	init_waitqueue_head(&debug_info->log_wq);
 
 	if (!debugfs_create_file("console_log",
-				 S_IFREG | S_IRUGO,
+				 S_IFREG | 0444,
 				 debug_info->dir,
 				 debug_info,
 				 &cros_ec_console_log_fops))
@@ -341,7 +400,7 @@ static int cros_ec_create_panicinfo(struct cros_ec_debugfs *debug_info)
 	debug_info->panicinfo_blob.size = ret;
 
 	if (!debugfs_create_blob("panicinfo",
-				 S_IFREG | S_IRUGO,
+				 S_IFREG | 0444,
 				 debug_info->dir,
 				 &debug_info->panicinfo_blob)) {
 		ret = -ENOMEM;
@@ -355,6 +414,15 @@ static int cros_ec_create_panicinfo(struct cros_ec_debugfs *debug_info)
 	return ret;
 }
 
+static int cros_ec_create_pdinfo(struct cros_ec_debugfs *debug_info)
+{
+	if (!debugfs_create_file("pdinfo", 0444, debug_info->dir, debug_info,
+				 &cros_ec_pdinfo_fops))
+		return -ENOMEM;
+
+	return 0;
+}
+
 int cros_ec_debugfs_init(struct cros_ec_dev *ec)
 {
 	struct cros_ec_platform *ec_platform = dev_get_platdata(ec->dev);
@@ -379,6 +447,10 @@ int cros_ec_debugfs_init(struct cros_ec_dev *ec)
 	if (ret)
 		goto remove_debugfs;
 
+	ret = cros_ec_create_pdinfo(debug_info);
+	if (ret)
+		goto remove_debugfs;
+
 	ec->debug_info = debug_info;
 
 	return 0;

drivers/platform/chrome/cros_ec_lpc.c

@@ -31,6 +31,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/printk.h>
+#include <linux/suspend.h>
 
 #define DRV_NAME "cros_ec_lpcs"
 #define ACPI_DRV_NAME "GOOG0004"
@@ -235,6 +236,9 @@ static void cros_ec_lpc_acpi_notify(acpi_handle device, u32 value, void *data)
 	    cros_ec_get_next_event(ec_dev, NULL) > 0)
 		blocking_notifier_call_chain(&ec_dev->event_notifier, 0,
 					     ec_dev);
+
+	if (value == ACPI_NOTIFY_DEVICE_WAKE)
+		pm_system_wakeup();
 }
 
 static int cros_ec_lpc_probe(struct platform_device *pdev)
@@ -341,6 +345,18 @@ static const struct dmi_system_id cros_ec_lpc_dmi_table[] __initconst = {
 			DMI_MATCH(DMI_BIOS_VERSION, "Google_"),
 		},
 	},
+	{
+		/*
+		 * If the box is running custom coreboot firmware then the
+		 * DMI BIOS version string will not be matched by "Google_",
+		 * but the system vendor string will still be matched by
+		 * "GOOGLE".
+		 */
+		.matches = {
+			DMI_MATCH(DMI_BIOS_VENDOR, "coreboot"),
+			DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
+		},
+	},
 	{
 		/* x86-link, the Chromebook Pixel. */
 		.matches = {

drivers/platform/chrome/cros_ec_sysfs.c

@@ -34,10 +34,12 @@
 #include <linux/types.h>
 #include <linux/uaccess.h>
 
+#define to_cros_ec_dev(dev)  container_of(dev, struct cros_ec_dev, class_dev)
+
 /* Accessor functions */
 
-static ssize_t show_ec_reboot(struct device *dev,
-			      struct device_attribute *attr, char *buf)
+static ssize_t reboot_show(struct device *dev,
+			   struct device_attribute *attr, char *buf)
 {
 	int count = 0;
 
@@ -48,9 +50,9 @@ static ssize_t show_ec_reboot(struct device *dev,
 	return count;
 }
 
-static ssize_t store_ec_reboot(struct device *dev,
-			       struct device_attribute *attr,
-			       const char *buf, size_t count)
+static ssize_t reboot_store(struct device *dev,
+			    struct device_attribute *attr,
+			    const char *buf, size_t count)
 {
 	static const struct {
 		const char * const str;
@@ -70,8 +72,7 @@ static ssize_t store_ec_reboot(struct device *dev,
 	int got_cmd = 0, offset = 0;
 	int i;
 	int ret;
-	struct cros_ec_dev *ec = container_of(dev,
-					      struct cros_ec_dev, class_dev);
+	struct cros_ec_dev *ec = to_cros_ec_dev(dev);
 
 	msg = kmalloc(sizeof(*msg) + sizeof(*param), GFP_KERNEL);
 	if (!msg)
@@ -114,22 +115,16 @@ static ssize_t store_ec_reboot(struct device *dev,
 	msg->command = EC_CMD_REBOOT_EC + ec->cmd_offset;
 	msg->outsize = sizeof(*param);
 	msg->insize = 0;
-	ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
-	if (ret < 0) {
+	ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
+	if (ret < 0)
 		count = ret;
-		goto exit;
-	}
-	if (msg->result != EC_RES_SUCCESS) {
-		dev_dbg(ec->dev, "EC result %d\n", msg->result);
-		count = -EINVAL;
-	}
 exit:
 	kfree(msg);
 	return count;
 }
 
-static ssize_t show_ec_version(struct device *dev,
-			       struct device_attribute *attr, char *buf)
+static ssize_t version_show(struct device *dev,
+			    struct device_attribute *attr, char *buf)
 {
 	static const char * const image_names[] = {"unknown", "RO", "RW"};
 	struct ec_response_get_version *r_ver;
@@ -138,8 +133,7 @@ static ssize_t show_ec_version(struct device *dev,
 	struct cros_ec_command *msg;
 	int ret;
 	int count = 0;
-	struct cros_ec_dev *ec = container_of(dev,
-					      struct cros_ec_dev, class_dev);
+	struct cros_ec_dev *ec = to_cros_ec_dev(dev);
 
 	msg = kmalloc(sizeof(*msg) + EC_HOST_PARAM_SIZE, GFP_KERNEL);
 	if (!msg)
@@ -150,17 +144,11 @@ static ssize_t show_ec_version(struct device *dev,
 	msg->command = EC_CMD_GET_VERSION + ec->cmd_offset;
 	msg->insize = sizeof(*r_ver);
 	msg->outsize = 0;
-	ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
+	ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
 	if (ret < 0) {
 		count = ret;
 		goto exit;
 	}
-	if (msg->result != EC_RES_SUCCESS) {
-		count = scnprintf(buf, PAGE_SIZE,
-				  "ERROR: EC returned %d\n", msg->result);
-		goto exit;
-	}
-
 	r_ver = (struct ec_response_get_version *)msg->data;
 	/* Strings should be null-terminated, but let's be sure. */
 	r_ver->version_string_ro[sizeof(r_ver->version_string_ro) - 1] = '\0';
@@ -237,14 +225,13 @@ static ssize_t show_ec_version(struct device *dev,
 	return count;
 }
 
-static ssize_t show_ec_flashinfo(struct device *dev,
-				 struct device_attribute *attr, char *buf)
+static ssize_t flashinfo_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
 {
 	struct ec_response_flash_info *resp;
 	struct cros_ec_command *msg;
 	int ret;
-	struct cros_ec_dev *ec = container_of(dev,
-					      struct cros_ec_dev, class_dev);
+	struct cros_ec_dev *ec = to_cros_ec_dev(dev);
 
 	msg = kmalloc(sizeof(*msg) + sizeof(*resp), GFP_KERNEL);
 	if (!msg)
@@ -255,14 +242,9 @@ static ssize_t show_ec_flashinfo(struct device *dev,
 	msg->command = EC_CMD_FLASH_INFO + ec->cmd_offset;
 	msg->insize = sizeof(*resp);
 	msg->outsize = 0;
-	ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
+	ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
 	if (ret < 0)
 		goto exit;
-	if (msg->result != EC_RES_SUCCESS) {
-		ret = scnprintf(buf, PAGE_SIZE,
-				"ERROR: EC returned %d\n", msg->result);
-		goto exit;
-	}
 
 	resp = (struct ec_response_flash_info *)msg->data;
 
@@ -276,21 +258,102 @@ static ssize_t show_ec_flashinfo(struct device *dev,
 	return ret;
 }
 
+/* Keyboard wake angle control */
+static ssize_t kb_wake_angle_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct cros_ec_dev *ec = to_cros_ec_dev(dev);
+	struct ec_response_motion_sense *resp;
+	struct ec_params_motion_sense *param;
+	struct cros_ec_command *msg;
+	int ret;
+
+	msg = kmalloc(sizeof(*msg) + EC_HOST_PARAM_SIZE, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	param = (struct ec_params_motion_sense *)msg->data;
+	msg->command = EC_CMD_MOTION_SENSE_CMD + ec->cmd_offset;
+	msg->version = 2;
+	param->cmd = MOTIONSENSE_CMD_KB_WAKE_ANGLE;
+	param->kb_wake_angle.data = EC_MOTION_SENSE_NO_VALUE;
+	msg->outsize = sizeof(*param);
+	msg->insize = sizeof(*resp);
+
+	ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
+	if (ret < 0)
+		goto exit;
+
+	resp = (struct ec_response_motion_sense *)msg->data;
+	ret = scnprintf(buf, PAGE_SIZE, "%d\n", resp->kb_wake_angle.ret);
+exit:
+	kfree(msg);
+	return ret;
+}
+
+static ssize_t kb_wake_angle_store(struct device *dev,
+				   struct device_attribute *attr,
+				   const char *buf, size_t count)
+{
+	struct cros_ec_dev *ec = to_cros_ec_dev(dev);
+	struct ec_params_motion_sense *param;
+	struct cros_ec_command *msg;
+	u16 angle;
+	int ret;
+
+	ret = kstrtou16(buf, 0, &angle);
+	if (ret)
+		return ret;
+
+	msg = kmalloc(sizeof(*msg) + EC_HOST_PARAM_SIZE, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	param = (struct ec_params_motion_sense *)msg->data;
+	msg->command = EC_CMD_MOTION_SENSE_CMD + ec->cmd_offset;
+	msg->version = 2;
+	param->cmd = MOTIONSENSE_CMD_KB_WAKE_ANGLE;
+	param->kb_wake_angle.data = angle;
+	msg->outsize = sizeof(*param);
+	msg->insize = sizeof(struct ec_response_motion_sense);
+
+	ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
+	kfree(msg);
+	if (ret < 0)
+		return ret;
+	return count;
+}
+
 /* Module initialization */
 
-static DEVICE_ATTR(reboot, S_IWUSR | S_IRUGO, show_ec_reboot, store_ec_reboot);
-static DEVICE_ATTR(version, S_IRUGO, show_ec_version, NULL);
-static DEVICE_ATTR(flashinfo, S_IRUGO, show_ec_flashinfo, NULL);
+static DEVICE_ATTR_RW(reboot);
+static DEVICE_ATTR_RO(version);
+static DEVICE_ATTR_RO(flashinfo);
+static DEVICE_ATTR_RW(kb_wake_angle);
 
 static struct attribute *__ec_attrs[] = {
+	&dev_attr_kb_wake_angle.attr,
 	&dev_attr_reboot.attr,
 	&dev_attr_version.attr,
 	&dev_attr_flashinfo.attr,
 	NULL,
 };
 
+static umode_t cros_ec_ctrl_visible(struct kobject *kobj,
+				    struct attribute *a, int n)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct cros_ec_dev *ec = to_cros_ec_dev(dev);
+
+	if (a == &dev_attr_kb_wake_angle.attr && !ec->has_kb_wake_angle)
+		return 0;
+
+	return a->mode;
+}
+
 struct attribute_group cros_ec_attr_group = {
 	.attrs = __ec_attrs,
+	.is_visible = cros_ec_ctrl_visible,
 };
 EXPORT_SYMBOL(cros_ec_attr_group);
 

include/linux/mfd/cros_ec.h

@@ -183,6 +183,7 @@ struct cros_ec_debugfs;
  * @ec_dev: cros_ec_device structure to talk to the physical device
  * @dev: pointer to the platform device
  * @debug_info: cros_ec_debugfs structure for debugging information
+ * @has_kb_wake_angle: true if at least 2 accelerometer are connected to the EC.
  * @cmd_offset: offset to apply for each command.
  */
 struct cros_ec_dev {
@@ -191,6 +192,7 @@ struct cros_ec_dev {
 	struct cros_ec_device *ec_dev;
 	struct device *dev;
 	struct cros_ec_debugfs *debug_info;
+	bool has_kb_wake_angle;
 	u16 cmd_offset;
 	u32 features[2];
 };

include/linux/mfd/cros_ec_commands.h

@@ -2948,6 +2948,9 @@ struct ec_response_usb_pd_control_v1 {
 
 #define EC_CMD_USB_PD_PORTS 0x102
 
+/* Maximum number of PD ports on a device, num_ports will be <= this */
+#define EC_USB_PD_MAX_PORTS 8
+
 struct ec_response_usb_pd_ports {
 	uint8_t num_ports;
 } __packed;

include/linux/platform_data/atmel_mxt_ts.h

-/*
- * Atmel maXTouch Touchscreen driver
- *
- * Copyright (C) 2010 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __LINUX_PLATFORM_DATA_ATMEL_MXT_TS_H
-#define __LINUX_PLATFORM_DATA_ATMEL_MXT_TS_H
-
-#include <linux/types.h>
-
-enum mxt_suspend_mode {
-	MXT_SUSPEND_DEEP_SLEEP	= 0,
-	MXT_SUSPEND_T9_CTRL	= 1,
-};
-
-/* The platform data for the Atmel maXTouch touchscreen driver */
-struct mxt_platform_data {
-	unsigned long irqflags;
-	u8 t19_num_keys;
-	const unsigned int *t19_keymap;
-	enum mxt_suspend_mode suspend_mode;
-};
-
-#endif /* __LINUX_PLATFORM_DATA_ATMEL_MXT_TS_H */