PCI: Revert to the original speed after PCIe failed link retraining

When `pcie_failed_link_retrain' has failed to retrain the link by hand
it leaves the link speed restricted to 2.5GT/s, which will then affect
any device that has been plugged in later on, which may not suffer from
the problem that caused the speed restriction to have been attempted.
Consequently such a downstream device will suffer from an unnecessary
communication throughput limitation and therefore performance loss.

Remove the speed restriction then and revert the Link Control 2 register
to its original state if link retraining with the speed restriction in
place has failed.  Retrain the link again afterwards so as to remove any
residual state, waiting on LT rather than DLLLA to avoid an excessive
delay and ignoring the result as this training is supposed to fail
anyway.

Fixes: a89c8224 ("PCI: Work around PCIe link training failures")
Link: https://lore.kernel.org/linux-pci/alpine.DEB.2.21.2408251412590.30766@angie.orcam.me.ukReported-by: Matthew W Carlis <mattc@purestorage.com>
Link: https://lore.kernel.org/r/20240806000659.30859-1-mattc@purestorage.com/
Link: https://lore.kernel.org/r/20240722193407.23255-1-mattc@purestorage.com/Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.5+

drivers/pci/quirks.c

@@ -66,7 +66,7 @@
  * apply this erratum workaround to any downstream ports as long as they
  * support Link Active reporting and have the Link Control 2 register.
  * Restrict the speed to 2.5GT/s then with the Target Link Speed field,
- * request a retrain and wait 200ms for the data link to go up.
+ * request a retrain and check the result.
  *
  * If this turns out successful and we know by the Vendor:Device ID it is
  * safe to do so, then lift the restriction, letting the devices negotiate
@@ -74,6 +74,10 @@
  * firmware may have already arranged and lift it with ports that already
  * report their data link being up.
  *
+ * Otherwise revert the speed to the original setting and request a retrain
+ * again to remove any residual state, ignoring the result as it's supposed
+ * to fail anyway.
+ *
  * Return TRUE if the link has been successfully retrained, otherwise FALSE.
  */
 bool pcie_failed_link_retrain(struct pci_dev *dev)
@@ -92,6 +96,8 @@ bool pcie_failed_link_retrain(struct pci_dev *dev)
 	pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &lnksta);
 	if ((lnksta & (PCI_EXP_LNKSTA_LBMS | PCI_EXP_LNKSTA_DLLLA)) ==
 	    PCI_EXP_LNKSTA_LBMS) {
+		u16 oldlnkctl2 = lnkctl2;
+
 		pci_info(dev, "broken device, retraining non-functional downstream link at 2.5GT/s\n");
 
 		lnkctl2 &= ~PCI_EXP_LNKCTL2_TLS;
@@ -100,6 +106,9 @@ bool pcie_failed_link_retrain(struct pci_dev *dev)
 
 		if (pcie_retrain_link(dev, false)) {
 			pci_info(dev, "retraining failed\n");
+			pcie_capability_write_word(dev, PCI_EXP_LNKCTL2,
+						   oldlnkctl2);
+			pcie_retrain_link(dev, true);
 			return false;
 		}