USB: ssu100: remove max_packet_size calculation

The max_packet_size logic is taken from ftdi_sio, but it's not needed
for this device.  This also makes proces_read_urb simpler.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/serial/ssu100.c

@@ -79,7 +79,6 @@ struct ssu100_port_private {
 	u8 shadowLSR;
 	u8 shadowMSR;
 	wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
-	unsigned short max_packet_size;
 	struct async_icount icount;
 };
 
@@ -464,36 +463,6 @@ static int ssu100_ioctl(struct tty_struct *tty, struct file *file,
 	return -ENOIOCTLCMD;
 }
 
-static void ssu100_set_max_packet_size(struct usb_serial_port *port)
-{
-	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
-	struct usb_serial *serial = port->serial;
-	struct usb_device *udev = serial->dev;
-
-	struct usb_interface *interface = serial->interface;
-	struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc;
-
-	unsigned num_endpoints;
-	int i;
-	unsigned long flags;
-
-	num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;
-	dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints);
-
-	for (i = 0; i < num_endpoints; i++) {
-		dev_info(&udev->dev, "Endpoint %d MaxPacketSize %d\n", i+1,
-			interface->cur_altsetting->endpoint[i].desc.wMaxPacketSize);
-		ep_desc = &interface->cur_altsetting->endpoint[i].desc;
-	}
-
-	/* set max packet size based on descriptor */
-	spin_lock_irqsave(&priv->status_lock, flags);
-	priv->max_packet_size = ep_desc->wMaxPacketSize;
-	spin_unlock_irqrestore(&priv->status_lock, flags);
-
-	dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size);
-}
-
 static int ssu100_attach(struct usb_serial *serial)
 {
 	struct ssu100_port_private *priv;
@@ -511,7 +480,6 @@ static int ssu100_attach(struct usb_serial *serial)
 	spin_lock_init(&priv->status_lock);
 	init_waitqueue_head(&priv->delta_msr_wait);
 	usb_set_serial_port_data(port, priv);
-	ssu100_set_max_packet_size(port);
 
 	return ssu100_initdevice(serial->dev);
 }
@@ -641,13 +609,14 @@ static void ssu100_update_lsr(struct usb_serial_port *port, u8 lsr,
 
 }
 
-static int ssu100_process_packet(struct tty_struct *tty,
-				 struct usb_serial_port *port,
-				 struct ssu100_port_private *priv,
-				 char *packet, int len)
+static int ssu100_process_packet(struct urb *urb,
+				 struct tty_struct *tty)
 {
-	int i;
+	struct usb_serial_port *port = urb->context;
+	char *packet = (char *)urb->transfer_buffer;
 	char flag = TTY_NORMAL;
+	u32 len = urb->actual_length;
+	int i;
 	char *ch;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -685,12 +654,8 @@ static int ssu100_process_packet(struct tty_struct *tty,
 static void ssu100_process_read_urb(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
-	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
-	char *data = (char *)urb->transfer_buffer;
 	struct tty_struct *tty;
-	int count = 0;
-	int i;
-	int len;
+	int count;
 
 	dbg("%s", __func__);
 
@@ -698,10 +663,7 @@ static void ssu100_process_read_urb(struct urb *urb)
 	if (!tty)
 		return;
 
-	for (i = 0; i < urb->actual_length; i += priv->max_packet_size) {
-		len = min_t(int, urb->actual_length - i, priv->max_packet_size);
-		count += ssu100_process_packet(tty, port, priv, &data[i], len);
-	}
+	count = ssu100_process_packet(urb, tty);
 
 	if (count)
 		tty_flip_buffer_push(tty);
@@ -717,8 +679,6 @@ static struct usb_serial_driver ssu100_device = {
 	.id_table	     = id_table,
 	.usb_driver	     = &ssu100_driver,
 	.num_ports	     = 1,
-	.bulk_in_size        = 256,
-	.bulk_out_size       = 256,
 	.open		     = ssu100_open,
 	.close		     = ssu100_close,
 	.attach              = ssu100_attach,