arm64: dts: qcom: sm8250: align TLMM pin configuration with DT schema

DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.

Drop also unneeded split between mux and config.
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930192954.242546-2-krzysztof.kozlowski@linaro.org

arch/arm64/boot/dts/qcom/qrb5165-rb5.dts

@@ -1210,33 +1210,33 @@ &tlmm {
 		"HST_WLAN_UART_TX",
 		"HST_WLAN_UART_RX";
 
-	lt9611_irq_pin: lt9611-irq {
+	lt9611_irq_pin: lt9611-irq-state {
 		pins = "gpio63";
 		function = "gpio";
 		bias-disable;
 	};
 
-	sdc2_default_state: sdc2-default {
-		clk {
+	sdc2_default_state: sdc2-default-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			bias-disable;
 			drive-strength = <16>;
 		};
 
-		cmd {
+		cmd-pins {
 			pins = "sdc2_cmd";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 
-		data {
+		data-pins {
 			pins = "sdc2_data";
 			bias-pull-up;
 			drive-strength = <10>;
 		};
 	};
 
-	sdc2_card_det_n: sd-card-det-n {
+	sdc2_card_det_n: sd-card-det-n-state {
 		pins = "gpio77";
 		function = "gpio";
 		bias-pull-up;

arch/arm64/boot/dts/qcom/sm8250-mtp.dts

@@ -799,32 +799,20 @@ wcd_tx: wcd9380-tx@0,3 {
 &tlmm {
 	gpio-reserved-ranges = <28 4>, <40 4>;
 
-	wcd938x_reset_default: wcd938x_reset_default {
-		mux {
+	wcd938x_reset_default: wcd938x-reset-default-state {
 		pins = "gpio32";
 		function = "gpio";
-		};
-
-		config {
-			pins = "gpio32";
 		drive-strength = <16>;
 		output-high;
 	};
-	};
 
-	wcd938x_reset_sleep: wcd938x_reset_sleep {
-		mux {
+	wcd938x_reset_sleep: wcd938x-reset-sleep-state {
 		pins = "gpio32";
 		function = "gpio";
-		};
-
-		config {
-			pins = "gpio32";
 		drive-strength = <16>;
 		bias-disable;
 		output-low;
 	};
-	};
 };
 
 &txmacro {

arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi

@@ -582,34 +582,34 @@ &slpi {
 &tlmm {
 	gpio-reserved-ranges = <40 4>, <52 4>;
 
-	sdc2_default_state: sdc2-default {
-		clk {
+	sdc2_default_state: sdc2-default-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			drive-strength = <16>;
 			bias-disable;
 		};
 
-		cmd {
+		cmd-pins {
 			pins = "sdc2_cmd";
 			drive-strength = <16>;
 			bias-pull-up;
 		};
 
-		data {
+		data-pins {
 			pins = "sdc2_data";
 			drive-strength = <16>;
 			bias-pull-up;
 		};
 	};
 
-	mdm2ap_default: mdm2ap-default {
+	mdm2ap_default: mdm2ap-default-state {
 		pins = "gpio1", "gpio3";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-disable;
 	};
 
-	ts_int_default: ts-int-default {
+	ts_int_default: ts-int-default-state {
 		pins = "gpio39";
 		function = "gpio";
 		drive-strength = <2>;
@@ -617,14 +617,14 @@ ts_int_default: ts-int-default {
 		input-enable;
 	};
 
-	ap2mdm_default: ap2mdm-default {
+	ap2mdm_default: ap2mdm-default-state {
 		pins = "gpio56", "gpio57";
 		function = "gpio";
 		drive-strength = <16>;
 		bias-disable;
 	};
 
-	sdc2_card_det_n: sd-card-det-n {
+	sdc2_card_det_n: sd-card-det-n-state {
 		pins = "gpio77";
 		function = "gpio";
 		bias-pull-up;