Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 "Just one new driver (Cypress StreetFighter touchkey), and no input
  core changes this time.

  Plus various fixes and enhancements to existing drivers"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits)
  Input: iforce - fix control-message timeout
  Input: wacom_i2c - use macros for the bit masks
  Input: ili210x - reduce sample period to 15ms
  Input: ili210x - improve polled sample spacing
  Input: ili210x - special case ili251x sample read out
  Input: elantench - fix misreporting trackpoint coordinates
  Input: synaptics-rmi4 - Fix device hierarchy
  Input: i8042 - Add quirk for Fujitsu Lifebook T725
  Input: cap11xx - add support for cap1206
  Input: remove unused header <linux/input/cy8ctmg110_pdata.h>
  Input: ili210x - add ili251x firmware update support
  Input: ili210x - export ili251x version details via sysfs
  Input: ili210x - use resolution from ili251x firmware
  Input: pm8941-pwrkey - respect reboot_mode for warm reset
  reboot: export symbol 'reboot_mode'
  Input: max77693-haptic - drop unneeded MODULE_ALIAS
  Input: cpcap-pwrbutton - do not set input parent explicitly
  Input: max8925_onkey - don't mark comment as kernel-doc
  Input: ads7846 - do not attempt IRQ workaround when deferring probe
  Input: ads7846 - use input_set_capability()
  ...

Documentation/devicetree/bindings/input/cypress-sf.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/cypress-sf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress StreetFighter touchkey controller
+
+maintainers:
+  - Yassine Oudjana <y.oudjana@protonmail.com>
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    const: cypress,sf3155
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  avdd-supply:
+    description: Regulator for AVDD analog voltage
+
+  vdd-supply:
+    description: Regulator for VDD digital voltage
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 8
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - avdd-supply
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchkey@28 {
+                compatible = "cypress,sf3155";
+                reg = <0x28>;
+                interrupt-parent = <&msmgpio>;
+                interrupts = <77 IRQ_TYPE_EDGE_FALLING>;
+                avdd-supply = <&vreg_l6a_1p8>;
+                vdd-supply = <&vdd_3v2_tp>;
+                linux,keycodes = <KEY_BACK KEY_MENU>;
+        };
+    };

Documentation/devicetree/bindings/input/microchip,cap11xx.yaml

@@ -19,6 +19,7 @@ properties:
       - microchip,cap1106
       - microchip,cap1126
       - microchip,cap1188
+      - microchip,cap1206
 
   reg:
     maxItems: 1

MAINTAINERS

@@ -4459,7 +4459,7 @@ CHIPONE ICN8318 I2C TOUCHSCREEN DRIVER
 M:	Hans de Goede <hdegoede@redhat.com>
 L:	linux-input@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt
+F:	Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml
 F:	drivers/input/touchscreen/chipone_icn8318.c
 
 CHIPONE ICN8505 I2C TOUCHSCREEN DRIVER
@@ -5205,6 +5205,13 @@ L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	drivers/input/touchscreen/cy8ctma140.c
 
+CYPRESS STREETFIGHTER TOUCHKEYS DRIVER
+M:	Yassine Oudjana <y.oudjana@protonmail.com>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/input/cypress-sf.yaml
+F:	drivers/input/keyboard/cypress-sf.c
+
 CYTTSP TOUCHSCREEN DRIVER
 M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-input@vger.kernel.org
@@ -8063,9 +8070,10 @@ F:	drivers/media/usb/go7007/
 
 GOODIX TOUCHSCREEN
 M:	Bastien Nocera <hadess@hadess.net>
+M:	Hans de Goede <hdegoede@redhat.com>
 L:	linux-input@vger.kernel.org
 S:	Maintained
-F:	drivers/input/touchscreen/goodix.c
+F:	drivers/input/touchscreen/goodix*
 
 GOOGLE ETHERNET DRIVERS
 M:	Jeroen de Borst <jeroendb@google.com>

drivers/input/joystick/analog.c

@@ -19,6 +19,7 @@
 #include <linux/input.h>
 #include <linux/gameport.h>
 #include <linux/jiffies.h>
+#include <linux/seq_buf.h>
 #include <linux/timex.h>
 #include <linux/timekeeping.h>
 
@@ -338,23 +339,24 @@ static void analog_calibrate_timer(struct analog_port *port)
 
 static void analog_name(struct analog *analog)
 {
-	snprintf(analog->name, sizeof(analog->name), "Analog %d-axis %d-button",
+	struct seq_buf s;
+
+	seq_buf_init(&s, analog->name, sizeof(analog->name));
+	seq_buf_printf(&s, "Analog %d-axis %d-button",
 		 hweight8(analog->mask & ANALOG_AXES_STD),
 		 hweight8(analog->mask & ANALOG_BTNS_STD) + !!(analog->mask & ANALOG_BTNS_CHF) * 2 +
 		 hweight16(analog->mask & ANALOG_BTNS_GAMEPAD) + !!(analog->mask & ANALOG_HBTN_CHF) * 4);
 
 	if (analog->mask & ANALOG_HATS_ALL)
-		snprintf(analog->name, sizeof(analog->name), "%s %d-hat",
-			 analog->name, hweight16(analog->mask & ANALOG_HATS_ALL));
+		seq_buf_printf(&s, " %d-hat",
+			       hweight16(analog->mask & ANALOG_HATS_ALL));
 
 	if (analog->mask & ANALOG_HAT_FCS)
-		strlcat(analog->name, " FCS", sizeof(analog->name));
+		seq_buf_printf(&s, " FCS");
 	if (analog->mask & ANALOG_ANY_CHF)
-		strlcat(analog->name, (analog->mask & ANALOG_SAITEK) ? " Saitek" : " CHF",
-			sizeof(analog->name));
+		seq_buf_printf(&s, (analog->mask & ANALOG_SAITEK) ? " Saitek" : " CHF");
 
-	strlcat(analog->name, (analog->mask & ANALOG_GAMEPAD) ? " gamepad": " joystick",
-		sizeof(analog->name));
+	seq_buf_printf(&s, (analog->mask & ANALOG_GAMEPAD) ? " gamepad" : " joystick");
 }
 
 /*

drivers/input/joystick/iforce/iforce-usb.c

@@ -92,7 +92,7 @@ static int iforce_usb_get_id(struct iforce *iforce, u8 id,
 				 id,
 				 USB_TYPE_VENDOR | USB_DIR_IN |
 					USB_RECIP_INTERFACE,
-				 0, 0, buf, IFORCE_MAX_LENGTH, HZ);
+				 0, 0, buf, IFORCE_MAX_LENGTH, 1000);
 	if (status < 0) {
 		dev_err(&iforce_usb->intf->dev,
 			"usb_submit_urb failed: %d\n", status);

drivers/input/joystick/tmdc.c

@@ -83,7 +83,7 @@ static const struct tmdc_model {
 	const signed char *axes;
 	const short *buttons;
 } tmdc_models[] = {
-	{   1, "ThrustMaster Millenium 3D Inceptor",	  6, 2, { 4, 2 }, { 4, 6 }, tmdc_abs, tmdc_btn_joy },
+	{   1, "ThrustMaster Millennium 3D Inceptor",	  6, 2, { 4, 2 }, { 4, 6 }, tmdc_abs, tmdc_btn_joy },
 	{   3, "ThrustMaster Rage 3D Gamepad",		  2, 0, { 8, 2 }, { 0, 0 }, tmdc_abs, tmdc_btn_pad },
 	{   4, "ThrustMaster Attack Throttle",		  5, 2, { 4, 6 }, { 4, 2 }, tmdc_abs_at, tmdc_btn_at },
 	{   8, "ThrustMaster FragMaster",		  4, 0, { 8, 2 }, { 0, 0 }, tmdc_abs_fm, tmdc_btn_fm },

drivers/input/keyboard/Kconfig

@@ -788,4 +788,14 @@ config KEYBOARD_MTK_PMIC
 	  To compile this driver as a module, choose M here: the
 	  module will be called pmic-keys.
 
+config KEYBOARD_CYPRESS_SF
+	tristate "Cypress StreetFighter touchkey support"
+	depends on I2C
+	help
+	  Say Y here if you want to enable support for Cypress StreetFighter
+	  touchkeys.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cypress-sf.
+
 endif

drivers/input/keyboard/Makefile

@@ -17,6 +17,7 @@ obj-$(CONFIG_KEYBOARD_BCM)		+= bcm-keypad.o
 obj-$(CONFIG_KEYBOARD_CAP11XX)		+= cap11xx.o
 obj-$(CONFIG_KEYBOARD_CLPS711X)		+= clps711x-keypad.o
 obj-$(CONFIG_KEYBOARD_CROS_EC)		+= cros_ec_keyb.o
+obj-$(CONFIG_KEYBOARD_CYPRESS_SF)	+= cypress-sf.o
 obj-$(CONFIG_KEYBOARD_DAVINCI)		+= davinci_keyscan.o
 obj-$(CONFIG_KEYBOARD_DLINK_DIR685)	+= dlink-dir685-touchkeys.o
 obj-$(CONFIG_KEYBOARD_EP93XX)		+= ep93xx_keypad.o

drivers/input/keyboard/cap11xx.c

@@ -91,18 +91,21 @@ struct cap11xx_hw_model {
 	u8 product_id;
 	unsigned int num_channels;
 	unsigned int num_leds;
+	bool no_gain;
 };
 
 enum {
 	CAP1106,
 	CAP1126,
 	CAP1188,
+	CAP1206,
 };
 
 static const struct cap11xx_hw_model cap11xx_devices[] = {
-	[CAP1106] = { .product_id = 0x55, .num_channels = 6, .num_leds = 0 },
-	[CAP1126] = { .product_id = 0x53, .num_channels = 6, .num_leds = 2 },
-	[CAP1188] = { .product_id = 0x50, .num_channels = 8, .num_leds = 8 },
+	[CAP1106] = { .product_id = 0x55, .num_channels = 6, .num_leds = 0, .no_gain = false },
+	[CAP1126] = { .product_id = 0x53, .num_channels = 6, .num_leds = 2, .no_gain = false },
+	[CAP1188] = { .product_id = 0x50, .num_channels = 8, .num_leds = 8, .no_gain = false },
+	[CAP1206] = { .product_id = 0x67, .num_channels = 6, .num_leds = 0, .no_gain = true },
 };
 
 static const struct reg_default cap11xx_reg_defaults[] = {
@@ -378,18 +381,25 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
 	node = dev->of_node;
 
 	if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) {
-		if (is_power_of_2(gain32) && gain32 <= 8)
+		if (cap->no_gain)
+			dev_warn(dev,
+				 "This version doesn't support sensor gain\n");
+		else if (is_power_of_2(gain32) && gain32 <= 8)
 			gain = ilog2(gain32);
 		else
 			dev_err(dev, "Invalid sensor-gain value %d\n", gain32);
 	}
 
+	if (id->driver_data != CAP1206) {
 		if (of_property_read_bool(node, "microchip,irq-active-high")) {
-		error = regmap_update_bits(priv->regmap, CAP11XX_REG_CONFIG2,
-					   CAP11XX_REG_CONFIG2_ALT_POL, 0);
+			error = regmap_update_bits(priv->regmap,
+						   CAP11XX_REG_CONFIG2,
+						   CAP11XX_REG_CONFIG2_ALT_POL,
+						   0);
 			if (error)
 				return error;
 		}
+	}
 
 	/* Provide some useful defaults */
 	for (i = 0; i < cap->num_channels; i++)
@@ -398,11 +408,14 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
 	of_property_read_u32_array(node, "linux,keycodes",
 				   priv->keycodes, cap->num_channels);
 
-	error = regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL,
+	if (!cap->no_gain) {
+		error = regmap_update_bits(priv->regmap,
+				CAP11XX_REG_MAIN_CONTROL,
 				CAP11XX_REG_MAIN_CONTROL_GAIN_MASK,
 				gain << CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT);
 		if (error)
 			return error;
+	}
 
 	/* Disable autorepeat. The Linux input system has its own handling. */
 	error = regmap_write(priv->regmap, CAP11XX_REG_REPEAT_RATE, 0);
@@ -470,6 +483,7 @@ static const struct of_device_id cap11xx_dt_ids[] = {
 	{ .compatible = "microchip,cap1106", },
 	{ .compatible = "microchip,cap1126", },
 	{ .compatible = "microchip,cap1188", },
+	{ .compatible = "microchip,cap1206", },
 	{}
 };
 MODULE_DEVICE_TABLE(of, cap11xx_dt_ids);
@@ -478,6 +492,7 @@ static const struct i2c_device_id cap11xx_i2c_ids[] = {
 	{ "cap1106", CAP1106 },
 	{ "cap1126", CAP1126 },
 	{ "cap1188", CAP1188 },
+	{ "cap1206", CAP1206 },
 	{}
 };
 MODULE_DEVICE_TABLE(i2c, cap11xx_i2c_ids);

drivers/input/keyboard/cypress-sf.c

+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Cypress StreetFighter Touchkey Driver
+ *
+ * Copyright (c) 2021 Yassine Oudjana <y.oudjana@protonmail.com>
+ */
+
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/regulator/consumer.h>
+
+#define CYPRESS_SF_DEV_NAME "cypress-sf"
+
+#define CYPRESS_SF_REG_BUTTON_STATUS	0x4a
+
+struct cypress_sf_data {
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	struct regulator_bulk_data regulators[2];
+	u32 *keycodes;
+	unsigned long keystates;
+	int num_keys;
+};
+
+static irqreturn_t cypress_sf_irq_handler(int irq, void *devid)
+{
+	struct cypress_sf_data *touchkey = devid;
+	unsigned long keystates, changed;
+	bool new_state;
+	int val, key;
+
+	val = i2c_smbus_read_byte_data(touchkey->client,
+				       CYPRESS_SF_REG_BUTTON_STATUS);
+	if (val < 0) {
+		dev_err(&touchkey->client->dev,
+			"Failed to read button status: %d", val);
+		return IRQ_NONE;
+	}
+	keystates = val;
+
+	bitmap_xor(&changed, &keystates, &touchkey->keystates,
+		   touchkey->num_keys);
+
+	for_each_set_bit(key, &changed, touchkey->num_keys) {
+		new_state = keystates & BIT(key);
+		dev_dbg(&touchkey->client->dev,
+			"Key %d changed to %d", key, new_state);
+		input_report_key(touchkey->input_dev,
+				 touchkey->keycodes[key], new_state);
+	}
+
+	input_sync(touchkey->input_dev);
+	touchkey->keystates = keystates;
+
+	return IRQ_HANDLED;
+}
+
+static int cypress_sf_probe(struct i2c_client *client)
+{
+	struct cypress_sf_data *touchkey;
+	int key, error;
+
+	touchkey = devm_kzalloc(&client->dev, sizeof(*touchkey), GFP_KERNEL);
+	if (!touchkey)
+		return -ENOMEM;
+
+	touchkey->client = client;
+	i2c_set_clientdata(client, touchkey);
+
+	touchkey->regulators[0].supply = "vdd";
+	touchkey->regulators[1].supply = "avdd";
+
+	error = devm_regulator_bulk_get(&client->dev,
+					ARRAY_SIZE(touchkey->regulators),
+					touchkey->regulators);
+	if (error) {
+		dev_err(&client->dev, "Failed to get regulators: %d\n", error);
+		return error;
+	}
+
+	touchkey->num_keys = device_property_read_u32_array(&client->dev,
+							    "linux,keycodes",
+							    NULL, 0);
+	if (touchkey->num_keys < 0) {
+		/* Default key count */
+		touchkey->num_keys = 2;
+	}
+
+	touchkey->keycodes = devm_kcalloc(&client->dev,
+					  touchkey->num_keys,
+					  sizeof(*touchkey->keycodes),
+					  GFP_KERNEL);
+	if (!touchkey->keycodes)
+		return -ENOMEM;
+
+	error = device_property_read_u32_array(&client->dev, "linux,keycodes",
+					       touchkey->keycodes,
+					       touchkey->num_keys);
+
+	if (error) {
+		dev_warn(&client->dev,
+			 "Failed to read keycodes: %d, using defaults\n",
+			 error);
+
+		/* Default keycodes */
+		touchkey->keycodes[0] = KEY_BACK;
+		touchkey->keycodes[1] = KEY_MENU;
+	}
+
+	error = regulator_bulk_enable(ARRAY_SIZE(touchkey->regulators),
+				      touchkey->regulators);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to enable regulators: %d\n", error);
+		return error;
+	}
+
+	touchkey->input_dev = devm_input_allocate_device(&client->dev);
+	if (!touchkey->input_dev) {
+		dev_err(&client->dev, "Failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	touchkey->input_dev->name = CYPRESS_SF_DEV_NAME;
+	touchkey->input_dev->id.bustype = BUS_I2C;
+
+	for (key = 0; key < touchkey->num_keys; ++key)
+		input_set_capability(touchkey->input_dev,
+				     EV_KEY, touchkey->keycodes[key]);
+
+	error = input_register_device(touchkey->input_dev);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to register input device: %d\n", error);
+		return error;
+	}
+
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					  NULL, cypress_sf_irq_handler,
+					  IRQF_ONESHOT,
+					  CYPRESS_SF_DEV_NAME, touchkey);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to register threaded irq: %d", error);
+		return error;
+	}
+
+	return 0;
+};
+
+static int __maybe_unused cypress_sf_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct cypress_sf_data *touchkey = i2c_get_clientdata(client);
+	int error;
+
+	disable_irq(client->irq);
+
+	error = regulator_bulk_disable(ARRAY_SIZE(touchkey->regulators),
+				       touchkey->regulators);
+	if (error) {
+		dev_err(dev, "Failed to disable regulators: %d", error);
+		enable_irq(client->irq);
+		return error;
+	}
+
+	return 0;
+}
+
+static int __maybe_unused cypress_sf_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct cypress_sf_data *touchkey = i2c_get_clientdata(client);
+	int error;
+
+	error = regulator_bulk_enable(ARRAY_SIZE(touchkey->regulators),
+				      touchkey->regulators);
+	if (error) {
+		dev_err(dev, "Failed to enable regulators: %d", error);
+		return error;
+	}
+
+	enable_irq(client->irq);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(cypress_sf_pm_ops,
+			 cypress_sf_suspend, cypress_sf_resume);
+
+static struct i2c_device_id cypress_sf_id_table[] = {
+	{ CYPRESS_SF_DEV_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, cypress_sf_id_table);
+
+#ifdef CONFIG_OF
+static const struct of_device_id cypress_sf_of_match[] = {
+	{ .compatible = "cypress,sf3155", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, cypress_sf_of_match);
+#endif
+
+static struct i2c_driver cypress_sf_driver = {
+	.driver = {
+		.name = CYPRESS_SF_DEV_NAME,
+		.pm = &cypress_sf_pm_ops,
+		.of_match_table = of_match_ptr(cypress_sf_of_match),
+	},
+	.id_table = cypress_sf_id_table,
+	.probe_new = cypress_sf_probe,
+};
+module_i2c_driver(cypress_sf_driver);
+
+MODULE_AUTHOR("Yassine Oudjana <y.oudjana@protonmail.com>");
+MODULE_DESCRIPTION("Cypress StreetFighter Touchkey Driver");
+MODULE_LICENSE("GPL v2");

drivers/input/keyboard/ep93xx_keypad.c

@@ -17,6 +17,7 @@
  * flag.
  */
 
+#include <linux/bits.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
@@ -26,6 +27,7 @@
 #include <linux/slab.h>
 #include <linux/soc/cirrus/ep93xx.h>
 #include <linux/platform_data/keypad-ep93xx.h>
+#include <linux/pm_wakeirq.h>
 
 /*
  * Keypad Interface Register offsets
@@ -35,28 +37,28 @@
 #define KEY_REG			0x08	/* Key Value Capture register */
 
 /* Key Scan Initialization Register bit defines */
-#define KEY_INIT_DBNC_MASK	(0x00ff0000)
-#define KEY_INIT_DBNC_SHIFT	(16)
-#define KEY_INIT_DIS3KY		(1<<15)
-#define KEY_INIT_DIAG		(1<<14)
-#define KEY_INIT_BACK		(1<<13)
-#define KEY_INIT_T2		(1<<12)
-#define KEY_INIT_PRSCL_MASK	(0x000003ff)
-#define KEY_INIT_PRSCL_SHIFT	(0)
+#define KEY_INIT_DBNC_MASK	GENMASK(23, 16)
+#define KEY_INIT_DBNC_SHIFT	16
+#define KEY_INIT_DIS3KY		BIT(15)
+#define KEY_INIT_DIAG		BIT(14)
+#define KEY_INIT_BACK		BIT(13)
+#define KEY_INIT_T2		BIT(12)
+#define KEY_INIT_PRSCL_MASK	GENMASK(9, 0)
+#define KEY_INIT_PRSCL_SHIFT	0
 
 /* Key Scan Diagnostic Register bit defines */
-#define KEY_DIAG_MASK		(0x0000003f)
-#define KEY_DIAG_SHIFT		(0)
+#define KEY_DIAG_MASK		GENMASK(5, 0)
+#define KEY_DIAG_SHIFT		0
 
 /* Key Value Capture Register bit defines */
-#define KEY_REG_K		(1<<15)
-#define KEY_REG_INT		(1<<14)
-#define KEY_REG_2KEYS		(1<<13)
-#define KEY_REG_1KEY		(1<<12)
-#define KEY_REG_KEY2_MASK	(0x00000fc0)
-#define KEY_REG_KEY2_SHIFT	(6)
-#define KEY_REG_KEY1_MASK	(0x0000003f)
-#define KEY_REG_KEY1_SHIFT	(0)
+#define KEY_REG_K		BIT(15)
+#define KEY_REG_INT		BIT(14)
+#define KEY_REG_2KEYS		BIT(13)
+#define KEY_REG_1KEY		BIT(12)
+#define KEY_REG_KEY2_MASK	GENMASK(11, 6)
+#define KEY_REG_KEY2_SHIFT	6
+#define KEY_REG_KEY1_MASK	GENMASK(5, 0)
+#define KEY_REG_KEY1_SHIFT	0
 
 #define EP93XX_MATRIX_SIZE	(EP93XX_MATRIX_ROWS * EP93XX_MATRIX_COLS)
 
@@ -175,8 +177,7 @@ static void ep93xx_keypad_close(struct input_dev *pdev)
 }
 
 
-#ifdef CONFIG_PM_SLEEP
-static int ep93xx_keypad_suspend(struct device *dev)
+static int __maybe_unused ep93xx_keypad_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
@@ -191,21 +192,15 @@ static int ep93xx_keypad_suspend(struct device *dev)
 
 	mutex_unlock(&input_dev->mutex);
 
-	if (device_may_wakeup(&pdev->dev))
-		enable_irq_wake(keypad->irq);
-
 	return 0;
 }
 
-static int ep93xx_keypad_resume(struct device *dev)
+static int __maybe_unused ep93xx_keypad_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
 	struct input_dev *input_dev = keypad->input_dev;
 
-	if (device_may_wakeup(&pdev->dev))
-		disable_irq_wake(keypad->irq);
-
 	mutex_lock(&input_dev->mutex);
 
 	if (input_device_enabled(input_dev)) {
@@ -220,11 +215,17 @@ static int ep93xx_keypad_resume(struct device *dev)
 
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(ep93xx_keypad_pm_ops,
 			 ep93xx_keypad_suspend, ep93xx_keypad_resume);
 
+static void ep93xx_keypad_release_gpio_action(void *_pdev)
+{
+	struct platform_device *pdev = _pdev;
+
+	ep93xx_keypad_release_gpio(pdev);
+}
+
 static int ep93xx_keypad_probe(struct platform_device *pdev)
 {
 	struct ep93xx_keypad *keypad;
@@ -233,61 +234,46 @@ static int ep93xx_keypad_probe(struct platform_device *pdev)
 	struct resource *res;
 	int err;
 
-	keypad = kzalloc(sizeof(struct ep93xx_keypad), GFP_KERNEL);
+	keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad), GFP_KERNEL);
 	if (!keypad)
 		return -ENOMEM;
 
 	keypad->pdata = dev_get_platdata(&pdev->dev);
-	if (!keypad->pdata) {
-		err = -EINVAL;
-		goto failed_free;
-	}
+	if (!keypad->pdata)
+		return -EINVAL;
 
 	keymap_data = keypad->pdata->keymap_data;
-	if (!keymap_data) {
-		err = -EINVAL;
-		goto failed_free;
-	}
+	if (!keymap_data)
+		return -EINVAL;
 
 	keypad->irq = platform_get_irq(pdev, 0);
-	if (keypad->irq < 0) {
-		err = keypad->irq;
-		goto failed_free;
-	}
+	if (keypad->irq < 0)
+		return keypad->irq;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		err = -ENXIO;
-		goto failed_free;
-	}
+	if (!res)
+		return -ENXIO;
 
-	res = request_mem_region(res->start, resource_size(res), pdev->name);
-	if (!res) {
-		err = -EBUSY;
-		goto failed_free;
-	}
-
-	keypad->mmio_base = ioremap(res->start, resource_size(res));
-	if (keypad->mmio_base == NULL) {
-		err = -ENXIO;
-		goto failed_free_mem;
-	}
+	keypad->mmio_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(keypad->mmio_base))
+		return PTR_ERR(keypad->mmio_base);
 
 	err = ep93xx_keypad_acquire_gpio(pdev);
 	if (err)
-		goto failed_free_io;
+		return err;
 
-	keypad->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(keypad->clk)) {
-		err = PTR_ERR(keypad->clk);
-		goto failed_free_gpio;
-	}
+	err = devm_add_action_or_reset(&pdev->dev,
+				       ep93xx_keypad_release_gpio_action, pdev);
+	if (err)
+		return err;
 
-	input_dev = input_allocate_device();
-	if (!input_dev) {
-		err = -ENOMEM;
-		goto failed_put_clk;
-	}
+	keypad->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(keypad->clk))
+		return PTR_ERR(keypad->clk);
+
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!input_dev)
+		return -ENOMEM;
 
 	keypad->input_dev = input_dev;
 
@@ -295,70 +281,40 @@ static int ep93xx_keypad_probe(struct platform_device *pdev)
 	input_dev->id.bustype = BUS_HOST;
 	input_dev->open = ep93xx_keypad_open;
 	input_dev->close = ep93xx_keypad_close;
-	input_dev->dev.parent = &pdev->dev;
 
 	err = matrix_keypad_build_keymap(keymap_data, NULL,
 					 EP93XX_MATRIX_ROWS, EP93XX_MATRIX_COLS,
 					 keypad->keycodes, input_dev);
 	if (err)
-		goto failed_free_dev;
+		return err;
 
 	if (keypad->pdata->flags & EP93XX_KEYPAD_AUTOREPEAT)
 		__set_bit(EV_REP, input_dev->evbit);
 	input_set_drvdata(input_dev, keypad);
 
-	err = request_irq(keypad->irq, ep93xx_keypad_irq_handler,
+	err = devm_request_irq(&pdev->dev, keypad->irq,
+			       ep93xx_keypad_irq_handler,
 			       0, pdev->name, keypad);
 	if (err)
-		goto failed_free_dev;
+		return err;
 
 	err = input_register_device(input_dev);
 	if (err)
-		goto failed_free_irq;
+		return err;
 
 	platform_set_drvdata(pdev, keypad);
+
 	device_init_wakeup(&pdev->dev, 1);
+	err = dev_pm_set_wake_irq(&pdev->dev, keypad->irq);
+	if (err)
+		dev_warn(&pdev->dev, "failed to set up wakeup irq: %d\n", err);
 
 	return 0;
-
-failed_free_irq:
-	free_irq(keypad->irq, keypad);
-failed_free_dev:
-	input_free_device(input_dev);
-failed_put_clk:
-	clk_put(keypad->clk);
-failed_free_gpio:
-	ep93xx_keypad_release_gpio(pdev);
-failed_free_io:
-	iounmap(keypad->mmio_base);
-failed_free_mem:
-	release_mem_region(res->start, resource_size(res));
-failed_free:
-	kfree(keypad);
-	return err;
 }
 
 static int ep93xx_keypad_remove(struct platform_device *pdev)
 {
-	struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
-	struct resource *res;
-
-	free_irq(keypad->irq, keypad);
-
-	if (keypad->enabled)
-		clk_disable(keypad->clk);
-	clk_put(keypad->clk);
-
-	input_unregister_device(keypad->input_dev);
-
-	ep93xx_keypad_release_gpio(pdev);
-
-	iounmap(keypad->mmio_base);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-
-	kfree(keypad);
+	dev_pm_clear_wake_irq(&pdev->dev);
 
 	return 0;
 }

drivers/input/keyboard/mpr121_touchkey.c

@@ -107,9 +107,9 @@ static struct regulator *mpr121_vdd_supply_init(struct device *dev)
 		return ERR_PTR(err);
 	}
 
-	err = devm_add_action(dev, mpr121_vdd_supply_disable, vdd_supply);
+	err = devm_add_action_or_reset(dev, mpr121_vdd_supply_disable,
+				       vdd_supply);
 	if (err) {
-		regulator_disable(vdd_supply);
 		dev_err(dev, "failed to add disable regulator action: %d\n",
 			err);
 		return ERR_PTR(err);

drivers/input/keyboard/omap-keypad.c

@@ -190,8 +190,7 @@ static int omap_kp_probe(struct platform_device *pdev)
 	row_shift = get_count_order(pdata->cols);
 	keycodemax = pdata->rows << row_shift;
 
-	omap_kp = kzalloc(sizeof(struct omap_kp) +
-			keycodemax * sizeof(unsigned short), GFP_KERNEL);
+	omap_kp = kzalloc(struct_size(omap_kp, keymap, keycodemax), GFP_KERNEL);
 	input_dev = input_allocate_device();
 	if (!omap_kp || !input_dev) {
 		kfree(omap_kp);

drivers/input/keyboard/tm2-touchkey.c

@@ -156,6 +156,8 @@ static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid)
 		goto out;
 	}
 
+	input_event(touchkey->input_dev, EV_MSC, MSC_SCAN, index);
+
 	if (data & TM2_TOUCHKEY_BIT_PRESS_EV) {
 		for (i = 0; i < touchkey->num_keycodes; i++)
 			input_report_key(touchkey->input_dev,
@@ -250,6 +252,11 @@ static int tm2_touchkey_probe(struct i2c_client *client,
 	touchkey->input_dev->name = TM2_TOUCHKEY_DEV_NAME;
 	touchkey->input_dev->id.bustype = BUS_I2C;
 
+	touchkey->input_dev->keycode = touchkey->keycodes;
+	touchkey->input_dev->keycodemax = touchkey->num_keycodes;
+	touchkey->input_dev->keycodesize = sizeof(touchkey->keycodes[0]);
+
+	input_set_capability(touchkey->input_dev, EV_MSC, MSC_SCAN);
 	for (i = 0; i < touchkey->num_keycodes; i++)
 		input_set_capability(touchkey->input_dev, EV_KEY,
 				     touchkey->keycodes[i]);

drivers/input/misc/adxl34x-i2c.c

@@ -103,7 +103,9 @@ static int adxl34x_i2c_remove(struct i2c_client *client)
 {
 	struct adxl34x *ac = i2c_get_clientdata(client);
 
-	return adxl34x_remove(ac);
+	adxl34x_remove(ac);
+
+	return 0;
 }
 
 static int __maybe_unused adxl34x_i2c_suspend(struct device *dev)

drivers/input/misc/adxl34x-spi.c

@@ -91,7 +91,9 @@ static int adxl34x_spi_remove(struct spi_device *spi)
 {
 	struct adxl34x *ac = spi_get_drvdata(spi);
 
-	return adxl34x_remove(ac);
+	adxl34x_remove(ac);
+
+	return 0;
 }
 
 static int __maybe_unused adxl34x_spi_suspend(struct device *dev)

drivers/input/misc/adxl34x.c

@@ -237,7 +237,7 @@ static const struct adxl34x_platform_data adxl34x_default_init = {
 
 static void adxl34x_get_triple(struct adxl34x *ac, struct axis_triple *axis)
 {
-	short buf[3];
+	__le16 buf[3];
 
 	ac->bops->read_block(ac->dev, DATAX0, DATAZ1 - DATAX0 + 1, buf);
 
@@ -896,15 +896,13 @@ struct adxl34x *adxl34x_probe(struct device *dev, int irq,
 }
 EXPORT_SYMBOL_GPL(adxl34x_probe);
 
-int adxl34x_remove(struct adxl34x *ac)
+void adxl34x_remove(struct adxl34x *ac)
 {
 	sysfs_remove_group(&ac->dev->kobj, &adxl34x_attr_group);
 	free_irq(ac->irq, ac);
 	input_unregister_device(ac->input);
 	dev_dbg(ac->dev, "unregistered accelerometer\n");
 	kfree(ac);
-
-	return 0;
 }
 EXPORT_SYMBOL_GPL(adxl34x_remove);
 

drivers/input/misc/adxl34x.h

@@ -25,6 +25,6 @@ void adxl34x_resume(struct adxl34x *ac);
 struct adxl34x *adxl34x_probe(struct device *dev, int irq,
 			      bool fifo_delay_default,
 			      const struct adxl34x_bus_ops *bops);
-int adxl34x_remove(struct adxl34x *ac);
+void adxl34x_remove(struct adxl34x *ac);
 
 #endif

drivers/input/misc/ariel-pwrbutton.c

@@ -149,12 +149,19 @@ static const struct of_device_id ariel_pwrbutton_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, ariel_pwrbutton_of_match);
 
+static const struct spi_device_id ariel_pwrbutton_spi_ids[] = {
+	{ .name = "wyse-ariel-ec-input" },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, ariel_pwrbutton_spi_ids);
+
 static struct spi_driver ariel_pwrbutton_driver = {
 	.driver = {
 		.name = "dell-wyse-ariel-ec-input",
 		.of_match_table = ariel_pwrbutton_of_match,
 	},
 	.probe = ariel_pwrbutton_probe,
+	.id_table = ariel_pwrbutton_spi_ids,
 };
 module_spi_driver(ariel_pwrbutton_driver);
 

drivers/input/misc/cpcap-pwrbutton.c

@@ -54,9 +54,13 @@ static irqreturn_t powerbutton_irq(int irq, void *_button)
 static int cpcap_power_button_probe(struct platform_device *pdev)
 {
 	struct cpcap_power_button *button;
-	int irq = platform_get_irq(pdev, 0);
+	int irq;
 	int err;
 
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
 	button = devm_kmalloc(&pdev->dev, sizeof(*button), GFP_KERNEL);
 	if (!button)
 		return -ENOMEM;
@@ -73,7 +77,6 @@ static int cpcap_power_button_probe(struct platform_device *pdev)
 
 	button->idev->name = "cpcap-pwrbutton";
 	button->idev->phys = "cpcap-pwrbutton/input0";
-	button->idev->dev.parent = button->dev;
 	input_set_capability(button->idev, EV_KEY, KEY_POWER);
 
 	err = devm_request_threaded_irq(&pdev->dev, irq, NULL,

drivers/input/misc/max77693-haptic.c

@@ -424,5 +424,4 @@ module_platform_driver(max77693_haptic_driver);
 MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
 MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
 MODULE_DESCRIPTION("MAXIM 77693/77843 Haptic driver");
-MODULE_ALIAS("platform:max77693-haptic");
 MODULE_LICENSE("GPL");

drivers/input/misc/max8925_onkey.c

-/**
+/*
  * MAX8925 ONKEY driver
  *
  * Copyright (C) 2009 Marvell International Ltd.

drivers/input/misc/palmas-pwrbutton.c

@@ -210,6 +210,11 @@ static int palmas_pwron_probe(struct platform_device *pdev)
 	INIT_DELAYED_WORK(&pwron->input_work, palmas_power_button_work);
 
 	pwron->irq = platform_get_irq(pdev, 0);
+	if (pwron->irq < 0) {
+		error = pwron->irq;
+		goto err_free_input;
+	}
+
 	error = request_threaded_irq(pwron->irq, NULL, pwron_irq,
 				     IRQF_TRIGGER_HIGH |
 					IRQF_TRIGGER_LOW |

drivers/input/misc/pm8941-pwrkey.c

@@ -29,6 +29,7 @@
 #define PON_PS_HOLD_RST_CTL2		0x5b
 #define  PON_PS_HOLD_ENABLE		BIT(7)
 #define  PON_PS_HOLD_TYPE_MASK		0x0f
+#define  PON_PS_HOLD_TYPE_WARM_RESET	1
 #define  PON_PS_HOLD_TYPE_SHUTDOWN	4
 #define  PON_PS_HOLD_TYPE_HARD_RESET	7
 
@@ -99,6 +100,9 @@ static int pm8941_reboot_notify(struct notifier_block *nb,
 		break;
 	case SYS_RESTART:
 	default:
+		if (reboot_mode == REBOOT_WARM)
+			reset_type = PON_PS_HOLD_TYPE_WARM_RESET;
+		else
 			reset_type = PON_PS_HOLD_TYPE_HARD_RESET;
 		break;
 	}

drivers/input/mouse/elantech.c

@@ -517,6 +517,19 @@ static void elantech_report_trackpoint(struct psmouse *psmouse,
 	case 0x16008020U:
 	case 0x26800010U:
 	case 0x36808000U:
+
+		/*
+		 * This firmware misreport coordinates for trackpoint
+		 * occasionally. Discard packets outside of [-127, 127] range
+		 * to prevent cursor jumps.
+		 */
+		if (packet[4] == 0x80 || packet[5] == 0x80 ||
+		    packet[1] >> 7 == packet[4] >> 7 ||
+		    packet[2] >> 7 == packet[5] >> 7) {
+			elantech_debug("discarding packet [%6ph]\n", packet);
+			break;
+
+		}
 		x = packet[4] - (int)((packet[1]^0x80) << 1);
 		y = (int)((packet[2]^0x80) << 1) - packet[5];
 

drivers/input/rmi4/rmi_bus.c

@@ -90,6 +90,7 @@ int rmi_register_transport_device(struct rmi_transport_dev *xport)
 
 	rmi_dev->dev.bus = &rmi_bus_type;
 	rmi_dev->dev.type = &rmi_device_type;
+	rmi_dev->dev.parent = xport->dev;
 
 	xport->rmi_dev = rmi_dev;
 

drivers/input/serio/i8042-x86ia64io.h

@@ -272,6 +272,13 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook S6230"),
 		},
 	},
+	{
+		/* Fujitsu Lifebook T725 laptop */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK T725"),
+		},
+	},
 	{
 		/* Fujitsu Lifebook U745 */
 		.matches = {
@@ -840,6 +847,13 @@ static const struct dmi_system_id __initconst i8042_dmi_notimeout_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK AH544"),
 		},
 	},
+	{
+		/* Fujitsu Lifebook T725 laptop */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK T725"),
+		},
+	},
 	{
 		/* Fujitsu U574 laptop */
 		/* https://bugzilla.kernel.org/show_bug.cgi?id=69731 */

drivers/input/touchscreen/Kconfig

@@ -425,6 +425,7 @@ config TOUCHSCREEN_HYCON_HY46XX
 config TOUCHSCREEN_ILI210X
 	tristate "Ilitek ILI210X based touchscreen"
 	depends on I2C
+	select CRC_CCITT
 	help
 	  Say Y here if you have a ILI210X based touchscreen
 	  controller. This driver supports models ILI2102,

drivers/input/touchscreen/Makefile

@@ -6,6 +6,7 @@
 # Each configuration option enables a list of files.
 
 wm97xx-ts-y := wm97xx-core.o
+goodix_ts-y := goodix.o goodix_fwupload.o
 
 obj-$(CONFIG_TOUCHSCREEN_88PM860X)	+= 88pm860x-ts.o
 obj-$(CONFIG_TOUCHSCREEN_AD7877)	+= ad7877.o
@@ -44,7 +45,7 @@ obj-$(CONFIG_TOUCHSCREEN_EGALAX)	+= egalax_ts.o
 obj-$(CONFIG_TOUCHSCREEN_EGALAX_SERIAL)	+= egalax_ts_serial.o
 obj-$(CONFIG_TOUCHSCREEN_EXC3000)	+= exc3000.o
 obj-$(CONFIG_TOUCHSCREEN_FUJITSU)	+= fujitsu_ts.o
-obj-$(CONFIG_TOUCHSCREEN_GOODIX)	+= goodix.o
+obj-$(CONFIG_TOUCHSCREEN_GOODIX)	+= goodix_ts.o
 obj-$(CONFIG_TOUCHSCREEN_HIDEEP)	+= hideep.o
 obj-$(CONFIG_TOUCHSCREEN_ILI210X)	+= ili210x.o
 obj-$(CONFIG_TOUCHSCREEN_ILITEK)	+= ilitek_ts_i2c.o

drivers/input/touchscreen/ads7846.c

@@ -101,10 +101,6 @@ struct ads7846 {
 	struct spi_device	*spi;
 	struct regulator	*reg;
 
-#if IS_ENABLED(CONFIG_HWMON)
-	struct device		*hwmon;
-#endif
-
 	u16			model;
 	u16			vref_mv;
 	u16			vref_delay_usecs;
@@ -142,13 +138,18 @@ struct ads7846 {
 
 	int			(*filter)(void *data, int data_idx, int *val);
 	void			*filter_data;
-	void			(*filter_cleanup)(void *data);
 	int			(*get_pendown_state)(void);
 	int			gpio_pendown;
 
 	void			(*wait_for_sync)(void);
 };
 
+enum ads7846_filter {
+	ADS7846_FILTER_OK,
+	ADS7846_FILTER_REPEAT,
+	ADS7846_FILTER_IGNORE,
+};
+
 /* leave chip selected when we're done, for quicker re-select? */
 #if	0
 #define	CS_CHANGE(xfer)	((xfer).cs_change = 1)
@@ -549,6 +550,8 @@ __ATTRIBUTE_GROUPS(ads7846_attr);
 
 static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts)
 {
+	struct device *hwmon;
+
 	/* hwmon sensors need a reference voltage */
 	switch (ts->model) {
 	case 7846:
@@ -569,17 +572,11 @@ static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts)
 		break;
 	}
 
-	ts->hwmon = hwmon_device_register_with_groups(&spi->dev, spi->modalias,
-						      ts, ads7846_attr_groups);
+	hwmon = devm_hwmon_device_register_with_groups(&spi->dev,
+						       spi->modalias, ts,
+						       ads7846_attr_groups);
 
-	return PTR_ERR_OR_ZERO(ts->hwmon);
-}
-
-static void ads784x_hwmon_unregister(struct spi_device *spi,
-				     struct ads7846 *ts)
-{
-	if (ts->hwmon)
-		hwmon_device_unregister(ts->hwmon);
+	return PTR_ERR_OR_ZERO(hwmon);
 }
 
 #else
@@ -588,11 +585,6 @@ static inline int ads784x_hwmon_register(struct spi_device *spi,
 {
 	return 0;
 }
-
-static inline void ads784x_hwmon_unregister(struct spi_device *spi,
-					    struct ads7846 *ts)
-{
-}
 #endif
 
 static ssize_t ads7846_pen_down_show(struct device *dev,
@@ -1014,8 +1006,8 @@ static int ads7846_setup_pendown(struct spi_device *spi,
 		ts->get_pendown_state = pdata->get_pendown_state;
 	} else if (gpio_is_valid(pdata->gpio_pendown)) {
 
-		err = gpio_request_one(pdata->gpio_pendown, GPIOF_IN,
-				       "ads7846_pendown");
+		err = devm_gpio_request_one(&spi->dev, pdata->gpio_pendown,
+					    GPIOF_IN, "ads7846_pendown");
 		if (err) {
 			dev_err(&spi->dev,
 				"failed to request/setup pendown GPIO%d: %d\n",
@@ -1212,23 +1204,29 @@ static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev)
 }
 #endif
 
+static void ads7846_regulator_disable(void *regulator)
+{
+	regulator_disable(regulator);
+}
+
 static int ads7846_probe(struct spi_device *spi)
 {
 	const struct ads7846_platform_data *pdata;
 	struct ads7846 *ts;
+	struct device *dev = &spi->dev;
 	struct ads7846_packet *packet;
 	struct input_dev *input_dev;
 	unsigned long irq_flags;
 	int err;
 
 	if (!spi->irq) {
-		dev_dbg(&spi->dev, "no IRQ?\n");
+		dev_dbg(dev, "no IRQ?\n");
 		return -EINVAL;
 	}
 
 	/* don't exceed max specified sample rate */
 	if (spi->max_speed_hz > (125000 * SAMPLE_BITS)) {
-		dev_err(&spi->dev, "f(sample) %d KHz?\n",
+		dev_err(dev, "f(sample) %d KHz?\n",
 			(spi->max_speed_hz/SAMPLE_BITS)/1000);
 		return -EINVAL;
 	}
@@ -1245,13 +1243,17 @@ static int ads7846_probe(struct spi_device *spi)
 	if (err < 0)
 		return err;
 
-	ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL);
-	packet = kzalloc(sizeof(struct ads7846_packet), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!ts || !packet || !input_dev) {
-		err = -ENOMEM;
-		goto err_free_mem;
-	}
+	ts = devm_kzalloc(dev, sizeof(struct ads7846), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	packet = devm_kzalloc(dev, sizeof(struct ads7846_packet), GFP_KERNEL);
+	if (!packet)
+		return -ENOMEM;
+
+	input_dev = devm_input_allocate_device(dev);
+	if (!input_dev)
+		return -ENOMEM;
 
 	spi_set_drvdata(spi, ts);
 
@@ -1262,13 +1264,11 @@ static int ads7846_probe(struct spi_device *spi)
 	mutex_init(&ts->lock);
 	init_waitqueue_head(&ts->wait);
 
-	pdata = dev_get_platdata(&spi->dev);
+	pdata = dev_get_platdata(dev);
 	if (!pdata) {
-		pdata = ads7846_probe_dt(&spi->dev);
-		if (IS_ERR(pdata)) {
-			err = PTR_ERR(pdata);
-			goto err_free_mem;
-		}
+		pdata = ads7846_probe_dt(dev);
+		if (IS_ERR(pdata))
+			return PTR_ERR(pdata);
 	}
 
 	ts->model = pdata->model ? : 7846;
@@ -1276,15 +1276,7 @@ static int ads7846_probe(struct spi_device *spi)
 	ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
 	ts->vref_mv = pdata->vref_mv;
 
-	if (pdata->filter != NULL) {
-		if (pdata->filter_init != NULL) {
-			err = pdata->filter_init(pdata, &ts->filter_data);
-			if (err < 0)
-				goto err_free_mem;
-		}
-		ts->filter = pdata->filter;
-		ts->filter_cleanup = pdata->filter_cleanup;
-	} else if (pdata->debounce_max) {
+	if (pdata->debounce_max) {
 		ts->debounce_max = pdata->debounce_max;
 		if (ts->debounce_max < 2)
 			ts->debounce_max = 2;
@@ -1298,7 +1290,7 @@ static int ads7846_probe(struct spi_device *spi)
 
 	err = ads7846_setup_pendown(spi, ts, pdata);
 	if (err)
-		goto err_cleanup_filter;
+		return err;
 
 	if (pdata->penirq_recheck_delay_usecs)
 		ts->penirq_recheck_delay_usecs =
@@ -1306,15 +1298,16 @@ static int ads7846_probe(struct spi_device *spi)
 
 	ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync;
 
-	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev));
+	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev));
 	snprintf(ts->name, sizeof(ts->name), "ADS%d Touchscreen", ts->model);
 
 	input_dev->name = ts->name;
 	input_dev->phys = ts->phys;
-	input_dev->dev.parent = &spi->dev;
 
-	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_dev->id.bustype = BUS_SPI;
+	input_dev->id.product = pdata->model;
+
+	input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
 	input_set_abs_params(input_dev, ABS_X,
 			pdata->x_min ? : 0,
 			pdata->x_max ? : MAX_12BIT,
@@ -1345,125 +1338,84 @@ static int ads7846_probe(struct spi_device *spi)
 
 	ads7846_setup_spi_msg(ts, pdata);
 
-	ts->reg = regulator_get(&spi->dev, "vcc");
+	ts->reg = devm_regulator_get(dev, "vcc");
 	if (IS_ERR(ts->reg)) {
 		err = PTR_ERR(ts->reg);
-		dev_err(&spi->dev, "unable to get regulator: %d\n", err);
-		goto err_free_gpio;
+		dev_err(dev, "unable to get regulator: %d\n", err);
+		return err;
 	}
 
 	err = regulator_enable(ts->reg);
 	if (err) {
-		dev_err(&spi->dev, "unable to enable regulator: %d\n", err);
-		goto err_put_regulator;
+		dev_err(dev, "unable to enable regulator: %d\n", err);
+		return err;
 	}
 
+	err = devm_add_action_or_reset(dev, ads7846_regulator_disable, ts->reg);
+	if (err)
+		return err;
+
 	irq_flags = pdata->irq_flags ? : IRQF_TRIGGER_FALLING;
 	irq_flags |= IRQF_ONESHOT;
 
-	err = request_threaded_irq(spi->irq, ads7846_hard_irq, ads7846_irq,
-				   irq_flags, spi->dev.driver->name, ts);
-	if (err && !pdata->irq_flags) {
-		dev_info(&spi->dev,
+	err = devm_request_threaded_irq(dev, spi->irq,
+					ads7846_hard_irq, ads7846_irq,
+					irq_flags, dev->driver->name, ts);
+	if (err && err != -EPROBE_DEFER && !pdata->irq_flags) {
+		dev_info(dev,
 			"trying pin change workaround on irq %d\n", spi->irq);
 		irq_flags |= IRQF_TRIGGER_RISING;
-		err = request_threaded_irq(spi->irq,
+		err = devm_request_threaded_irq(dev, spi->irq,
 						ads7846_hard_irq, ads7846_irq,
-				  irq_flags, spi->dev.driver->name, ts);
+						irq_flags, dev->driver->name,
+						ts);
 	}
 
 	if (err) {
-		dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
-		goto err_disable_regulator;
+		dev_dbg(dev, "irq %d busy?\n", spi->irq);
+		return err;
 	}
 
 	err = ads784x_hwmon_register(spi, ts);
 	if (err)
-		goto err_free_irq;
+		return err;
 
-	dev_info(&spi->dev, "touchscreen, irq %d\n", spi->irq);
+	dev_info(dev, "touchscreen, irq %d\n", spi->irq);
 
 	/*
 	 * Take a first sample, leaving nPENIRQ active and vREF off; avoid
 	 * the touchscreen, in case it's not connected.
 	 */
 	if (ts->model == 7845)
-		ads7845_read12_ser(&spi->dev, PWRDOWN);
+		ads7845_read12_ser(dev, PWRDOWN);
 	else
-		(void) ads7846_read12_ser(&spi->dev, READ_12BIT_SER(vaux));
+		(void) ads7846_read12_ser(dev, READ_12BIT_SER(vaux));
 
-	err = sysfs_create_group(&spi->dev.kobj, &ads784x_attr_group);
+	err = devm_device_add_group(dev, &ads784x_attr_group);
 	if (err)
-		goto err_remove_hwmon;
+		return err;
 
 	err = input_register_device(input_dev);
 	if (err)
-		goto err_remove_attr_group;
+		return err;
 
-	device_init_wakeup(&spi->dev, pdata->wakeup);
+	device_init_wakeup(dev, pdata->wakeup);
 
 	/*
 	 * If device does not carry platform data we must have allocated it
 	 * when parsing DT data.
 	 */
-	if (!dev_get_platdata(&spi->dev))
-		devm_kfree(&spi->dev, (void *)pdata);
+	if (!dev_get_platdata(dev))
+		devm_kfree(dev, (void *)pdata);
 
 	return 0;
-
- err_remove_attr_group:
-	sysfs_remove_group(&spi->dev.kobj, &ads784x_attr_group);
- err_remove_hwmon:
-	ads784x_hwmon_unregister(spi, ts);
- err_free_irq:
-	free_irq(spi->irq, ts);
- err_disable_regulator:
-	regulator_disable(ts->reg);
- err_put_regulator:
-	regulator_put(ts->reg);
- err_free_gpio:
-	if (!ts->get_pendown_state)
-		gpio_free(ts->gpio_pendown);
- err_cleanup_filter:
-	if (ts->filter_cleanup)
-		ts->filter_cleanup(ts->filter_data);
- err_free_mem:
-	input_free_device(input_dev);
-	kfree(packet);
-	kfree(ts);
-	return err;
 }
 
 static int ads7846_remove(struct spi_device *spi)
 {
 	struct ads7846 *ts = spi_get_drvdata(spi);
 
-	sysfs_remove_group(&spi->dev.kobj, &ads784x_attr_group);
-
-	ads7846_disable(ts);
-	free_irq(ts->spi->irq, ts);
-
-	input_unregister_device(ts->input);
-
-	ads784x_hwmon_unregister(spi, ts);
-
-	regulator_put(ts->reg);
-
-	if (!ts->get_pendown_state) {
-		/*
-		 * If we are not using specialized pendown method we must
-		 * have been relying on gpio we set up ourselves.
-		 */
-		gpio_free(ts->gpio_pendown);
-	}
-
-	if (ts->filter_cleanup)
-		ts->filter_cleanup(ts->filter_data);
-
-	kfree(ts->packet);
-	kfree(ts);
-
-	dev_dbg(&spi->dev, "unregistered touchscreen\n");
+	ads7846_stop(ts);
 
 	return 0;
 }

drivers/input/touchscreen/elants_i2c.c

@@ -1439,11 +1439,11 @@ static int elants_i2c_probe(struct i2c_client *client)
 	if (error)
 		return error;
 
-	error = devm_add_action(&client->dev, elants_i2c_power_off, ts);
+	error = devm_add_action_or_reset(&client->dev,
+					 elants_i2c_power_off, ts);
 	if (error) {
 		dev_err(&client->dev,
 			"failed to install power off action: %d\n", error);
-		elants_i2c_power_off(ts);
 		return error;
 	}
 

drivers/input/touchscreen/goodix.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __GOODIX_H__
+#define __GOODIX_H__
+
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/regulator/consumer.h>
+
+/* Register defines */
+#define GOODIX_REG_MISCTL_DSP_CTL		0x4010
+#define GOODIX_REG_MISCTL_SRAM_BANK		0x4048
+#define GOODIX_REG_MISCTL_MEM_CD_EN		0x4049
+#define GOODIX_REG_MISCTL_CACHE_EN		0x404B
+#define GOODIX_REG_MISCTL_TMR0_EN		0x40B0
+#define GOODIX_REG_MISCTL_SWRST			0x4180
+#define GOODIX_REG_MISCTL_CPU_SWRST_PULSE	0x4184
+#define GOODIX_REG_MISCTL_BOOTCTL		0x4190
+#define GOODIX_REG_MISCTL_BOOT_OPT		0x4218
+#define GOODIX_REG_MISCTL_BOOT_CTL		0x5094
+
+#define GOODIX_REG_FW_SIG			0x8000
+#define GOODIX_FW_SIG_LEN			10
+
+#define GOODIX_REG_MAIN_CLK			0x8020
+#define GOODIX_MAIN_CLK_LEN			6
+
+#define GOODIX_REG_COMMAND			0x8040
+#define GOODIX_CMD_SCREEN_OFF			0x05
+
+#define GOODIX_REG_SW_WDT			0x8041
+
+#define GOODIX_REG_REQUEST			0x8043
+#define GOODIX_RQST_RESPONDED			0x00
+#define GOODIX_RQST_CONFIG			0x01
+#define GOODIX_RQST_BAK_REF			0x02
+#define GOODIX_RQST_RESET			0x03
+#define GOODIX_RQST_MAIN_CLOCK			0x04
+/*
+ * Unknown request which gets send by the controller aprox.
+ * every 34 seconds once it is up and running.
+ */
+#define GOODIX_RQST_UNKNOWN			0x06
+#define GOODIX_RQST_IDLE			0xFF
+
+#define GOODIX_REG_STATUS			0x8044
+
+#define GOODIX_GT1X_REG_CONFIG_DATA		0x8050
+#define GOODIX_GT9X_REG_CONFIG_DATA		0x8047
+#define GOODIX_REG_ID				0x8140
+#define GOODIX_READ_COOR_ADDR			0x814E
+#define GOODIX_REG_BAK_REF			0x99D0
+
+#define GOODIX_ID_MAX_LEN			4
+#define GOODIX_CONFIG_MAX_LENGTH		240
+#define GOODIX_MAX_KEYS				7
+
+enum goodix_irq_pin_access_method {
+	IRQ_PIN_ACCESS_NONE,
+	IRQ_PIN_ACCESS_GPIO,
+	IRQ_PIN_ACCESS_ACPI_GPIO,
+	IRQ_PIN_ACCESS_ACPI_METHOD,
+};
+
+struct goodix_ts_data;
+
+struct goodix_chip_data {
+	u16 config_addr;
+	int config_len;
+	int (*check_config)(struct goodix_ts_data *ts, const u8 *cfg, int len);
+	void (*calc_config_checksum)(struct goodix_ts_data *ts);
+};
+
+struct goodix_ts_data {
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	const struct goodix_chip_data *chip;
+	const char *firmware_name;
+	struct touchscreen_properties prop;
+	unsigned int max_touch_num;
+	unsigned int int_trigger_type;
+	struct regulator *avdd28;
+	struct regulator *vddio;
+	struct gpio_desc *gpiod_int;
+	struct gpio_desc *gpiod_rst;
+	int gpio_count;
+	int gpio_int_idx;
+	char id[GOODIX_ID_MAX_LEN + 1];
+	char cfg_name[64];
+	u16 version;
+	bool reset_controller_at_probe;
+	bool load_cfg_from_disk;
+	struct completion firmware_loading_complete;
+	unsigned long irq_flags;
+	enum goodix_irq_pin_access_method irq_pin_access_method;
+	unsigned int contact_size;
+	u8 config[GOODIX_CONFIG_MAX_LENGTH];
+	unsigned short keymap[GOODIX_MAX_KEYS];
+	u8 main_clk[GOODIX_MAIN_CLK_LEN];
+	int bak_ref_len;
+	u8 *bak_ref;
+};
+
+int goodix_i2c_read(struct i2c_client *client, u16 reg, u8 *buf, int len);
+int goodix_i2c_write(struct i2c_client *client, u16 reg, const u8 *buf, int len);
+int goodix_i2c_write_u8(struct i2c_client *client, u16 reg, u8 value);
+int goodix_send_cfg(struct goodix_ts_data *ts, const u8 *cfg, int len);
+int goodix_int_sync(struct goodix_ts_data *ts);
+int goodix_reset_no_int_sync(struct goodix_ts_data *ts);
+
+int goodix_firmware_check(struct goodix_ts_data *ts);
+bool goodix_handle_fw_request(struct goodix_ts_data *ts);
+void goodix_save_bak_ref(struct goodix_ts_data *ts);
+
+#endif

drivers/input/touchscreen/raydium_i2c_ts.c

@@ -37,6 +37,7 @@
 #define RM_CMD_BOOT_READ	0x44		/* send wait bl data ready*/
 
 #define RM_BOOT_RDY		0xFF		/* bl data ready */
+#define RM_BOOT_CMD_READHWID	0x0E		/* read hwid */
 
 /* I2C main commands */
 #define RM_CMD_QUERY_BANK	0x2B
@@ -290,6 +291,44 @@ static int raydium_i2c_sw_reset(struct i2c_client *client)
 	return 0;
 }
 
+static int raydium_i2c_query_ts_bootloader_info(struct raydium_data *ts)
+{
+	struct i2c_client *client = ts->client;
+	static const u8 get_hwid[] = { RM_BOOT_CMD_READHWID,
+				       0x10, 0xc0, 0x01, 0x00, 0x04, 0x00 };
+	u8 rbuf[5] = { 0 };
+	u32 hw_ver;
+	int error;
+
+	error = raydium_i2c_send(client, RM_CMD_BOOT_WRT,
+				 get_hwid, sizeof(get_hwid));
+	if (error) {
+		dev_err(&client->dev, "WRT HWID command failed: %d\n", error);
+		return error;
+	}
+
+	error = raydium_i2c_send(client, RM_CMD_BOOT_ACK, rbuf, 1);
+	if (error) {
+		dev_err(&client->dev, "Ack HWID command failed: %d\n", error);
+		return error;
+	}
+
+	error = raydium_i2c_read(client, RM_CMD_BOOT_CHK, rbuf, sizeof(rbuf));
+	if (error) {
+		dev_err(&client->dev, "Read HWID command failed: %d (%4ph)\n",
+			error, rbuf + 1);
+		hw_ver = 0xffffffffUL;
+	} else {
+		hw_ver = get_unaligned_be32(rbuf + 1);
+	}
+
+	ts->info.hw_ver = cpu_to_le32(hw_ver);
+	ts->info.main_ver = 0xff;
+	ts->info.sub_ver = 0xff;
+
+	return error;
+}
+
 static int raydium_i2c_query_ts_info(struct raydium_data *ts)
 {
 	struct i2c_client *client = ts->client;
@@ -388,13 +427,10 @@ static int raydium_i2c_initialize(struct raydium_data *ts)
 	if (error)
 		ts->boot_mode = RAYDIUM_TS_BLDR;
 
-	if (ts->boot_mode == RAYDIUM_TS_BLDR) {
-		ts->info.hw_ver = cpu_to_le32(0xffffffffUL);
-		ts->info.main_ver = 0xff;
-		ts->info.sub_ver = 0xff;
-	} else {
+	if (ts->boot_mode == RAYDIUM_TS_BLDR)
+		raydium_i2c_query_ts_bootloader_info(ts);
+	else
 		raydium_i2c_query_ts_info(ts);
-	}
 
 	return error;
 }
@@ -1082,11 +1118,11 @@ static int raydium_i2c_probe(struct i2c_client *client,
 	if (error)
 		return error;
 
-	error = devm_add_action(&client->dev, raydium_i2c_power_off, ts);
+	error = devm_add_action_or_reset(&client->dev,
+					 raydium_i2c_power_off, ts);
 	if (error) {
 		dev_err(&client->dev,
 			"failed to install power off action: %d\n", error);
-		raydium_i2c_power_off(ts);
 		return error;
 	}
 
@@ -1218,7 +1254,7 @@ static SIMPLE_DEV_PM_OPS(raydium_i2c_pm_ops,
 			 raydium_i2c_suspend, raydium_i2c_resume);
 
 static const struct i2c_device_id raydium_i2c_id[] = {
-	{ "raydium_i2c" , 0 },
+	{ "raydium_i2c", 0 },
 	{ "rm32380", 0 },
 	{ /* sentinel */ }
 };

drivers/input/touchscreen/st1232.c

@@ -92,7 +92,7 @@ static int st1232_ts_wait_ready(struct st1232_ts_data *ts)
 	unsigned int retries;
 	int error;
 
-	for (retries = 10; retries; retries--) {
+	for (retries = 100; retries; retries--) {
 		error = st1232_ts_read_data(ts, REG_STATUS, 1);
 		if (!error) {
 			switch (ts->read_buf[0]) {
@@ -389,6 +389,7 @@ static struct i2c_driver st1232_ts_driver = {
 	.driver = {
 		.name	= ST1232_TS_NAME,
 		.of_match_table = st1232_ts_dt_ids,
+		.probe_type	= PROBE_PREFER_ASYNCHRONOUS,
 		.pm	= &st1232_ts_pm_ops,
 	},
 };

drivers/input/touchscreen/tsc2004.c

@@ -45,7 +45,9 @@ static int tsc2004_probe(struct i2c_client *i2c,
 
 static int tsc2004_remove(struct i2c_client *i2c)
 {
-	return tsc200x_remove(&i2c->dev);
+	tsc200x_remove(&i2c->dev);
+
+	return 0;
 }
 
 static const struct i2c_device_id tsc2004_idtable[] = {

drivers/input/touchscreen/tsc2005.c

@@ -66,7 +66,9 @@ static int tsc2005_probe(struct spi_device *spi)
 
 static int tsc2005_remove(struct spi_device *spi)
 {
-	return tsc200x_remove(&spi->dev);
+	tsc200x_remove(&spi->dev);
+
+	return 0;
 }
 
 #ifdef CONFIG_OF

drivers/input/touchscreen/tsc200x-core.c

@@ -577,15 +577,13 @@ int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id,
 }
 EXPORT_SYMBOL_GPL(tsc200x_probe);
 
-int tsc200x_remove(struct device *dev)
+void tsc200x_remove(struct device *dev)
 {
 	struct tsc200x *ts = dev_get_drvdata(dev);
 
 	sysfs_remove_group(&dev->kobj, &tsc200x_attr_group);
 
 	regulator_disable(ts->vio);
-
-	return 0;
 }
 EXPORT_SYMBOL_GPL(tsc200x_remove);
 

drivers/input/touchscreen/tsc200x-core.h

@@ -74,6 +74,6 @@ extern const struct dev_pm_ops tsc200x_pm_ops;
 int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id,
 		  struct regmap *regmap,
 		  int (*tsc200x_cmd)(struct device *dev, u8 cmd));
-int tsc200x_remove(struct device *dev);
+void tsc200x_remove(struct device *dev);
 
 #endif

drivers/input/touchscreen/wacom_i2c.c

@@ -6,6 +6,7 @@
  * <tobita.tatsunosuke@wacom.co.jp>
  */
 
+#include <linux/bits.h>
 #include <linux/module.h>
 #include <linux/input.h>
 #include <linux/i2c.h>
@@ -14,6 +15,15 @@
 #include <linux/interrupt.h>
 #include <asm/unaligned.h>
 
+/* Bitmasks (for data[3]) */
+#define WACOM_TIP_SWITCH	BIT(0)
+#define WACOM_BARREL_SWITCH	BIT(1)
+#define WACOM_ERASER		BIT(2)
+#define WACOM_INVERT		BIT(3)
+#define WACOM_BARREL_SWITCH_2	BIT(4)
+#define WACOM_IN_PROXIMITY	BIT(5)
+
+/* Registers */
 #define WACOM_CMD_QUERY0	0x04
 #define WACOM_CMD_QUERY1	0x00
 #define WACOM_CMD_QUERY2	0x33
@@ -99,19 +109,19 @@ static irqreturn_t wacom_i2c_irq(int irq, void *dev_id)
 	if (error < 0)
 		goto out;
 
-	tsw = data[3] & 0x01;
-	ers = data[3] & 0x04;
-	f1 = data[3] & 0x02;
-	f2 = data[3] & 0x10;
+	tsw = data[3] & WACOM_TIP_SWITCH;
+	ers = data[3] & WACOM_ERASER;
+	f1 = data[3] & WACOM_BARREL_SWITCH;
+	f2 = data[3] & WACOM_BARREL_SWITCH_2;
 	x = le16_to_cpup((__le16 *)&data[4]);
 	y = le16_to_cpup((__le16 *)&data[6]);
 	pressure = le16_to_cpup((__le16 *)&data[8]);
 
 	if (!wac_i2c->prox)
-		wac_i2c->tool = (data[3] & 0x0c) ?
+		wac_i2c->tool = (data[3] & (WACOM_ERASER | WACOM_INVERT)) ?
 			BTN_TOOL_RUBBER : BTN_TOOL_PEN;
 
-	wac_i2c->prox = data[3] & 0x20;
+	wac_i2c->prox = data[3] & WACOM_IN_PROXIMITY;
 
 	input_report_key(input, BTN_TOUCH, tsw || ers);
 	input_report_key(input, wac_i2c->tool, wac_i2c->prox);

include/linux/input/cy8ctmg110_pdata.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _LINUX_CY8CTMG110_PDATA_H
-#define _LINUX_CY8CTMG110_PDATA_H
-
-struct cy8ctmg110_pdata
-{
-	int reset_pin;		/* Reset pin is wired to this GPIO (optional) */
-};
-
-#endif

include/linux/spi/ads7846.h

 /* SPDX-License-Identifier: GPL-2.0 */
 /* linux/spi/ads7846.h */
 
-/* Touchscreen characteristics vary between boards and models.  The
- * platform_data for the device's "struct device" holds this information.
- *
- * It's OK if the min/max values are zero.
- */
-enum ads7846_filter {
-	ADS7846_FILTER_OK,
-	ADS7846_FILTER_REPEAT,
-	ADS7846_FILTER_IGNORE,
-};
-
 struct ads7846_platform_data {
 	u16	model;			/* 7843, 7845, 7846, 7873. */
 	u16	vref_delay_usecs;	/* 0 for external vref; etc */
@@ -51,10 +40,6 @@ struct ads7846_platform_data {
 	int	gpio_pendown_debounce;	/* platform specific debounce time for
 					 * the gpio_pendown */
 	int	(*get_pendown_state)(void);
-	int	(*filter_init)	(const struct ads7846_platform_data *pdata,
-				 void **filter_data);
-	int	(*filter)	(void *filter_data, int data_idx, int *val);
-	void	(*filter_cleanup)(void *filter_data);
 	void	(*wait_for_sync)(void);
 	bool	wakeup;
 	unsigned long irq_flags;

kernel/reboot.c

@@ -33,6 +33,7 @@ EXPORT_SYMBOL(cad_pid);
 #define DEFAULT_REBOOT_MODE
 #endif
 enum reboot_mode reboot_mode DEFAULT_REBOOT_MODE;
+EXPORT_SYMBOL_GPL(reboot_mode);
 enum reboot_mode panic_reboot_mode = REBOOT_UNDEFINED;
 
 /*