platform/x86: acerhdf: restructure to allow large BIOS table be __initconst

There is a table of Vendor/Model/Version {control data} in this driver,
but outside of the initial probe, the V/M/V is never used again, and
neither are any of the entries for platforms other than the one which
matches the running target.

By simply storing the {control data} for the matched platform, we can
mark the large table __initconst, which reduces the loaded driver size
by 20 percent.

Before:
	root@gw:~/git/linux-head# lsmod
	Module                  Size  Used by
	acerhdf                20480  0
	root@gw:~/git/linux-head#

After:
	root@gw:~/git/linux-head# lsmod
	Module                  Size  Used by
	acerhdf                16384  0
	root@gw:~/git/linux-head#

Cc: Peter Feuerer <peter@piie.net>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Peter Feuerer <peter@piie.net>

drivers/platform/x86/acerhdf.c

@@ -133,7 +133,7 @@ static const struct manualcmd mcmd = {
 	.moff = 0xff,
 };
 
-/* BIOS settings */
+/* BIOS settings - only used during probe */
 struct bios_settings {
 	const char *vendor;
 	const char *product;
@@ -144,8 +144,18 @@ struct bios_settings {
 	int mcmd_enable;
 };
 
+/* This could be a daughter struct in the above, but not worth the redirect */
+struct ctrl_settings {
+	u8 fanreg;
+	u8 tempreg;
+	struct fancmd cmd;
+	int mcmd_enable;
+};
+
+static struct ctrl_settings ctrl_cfg __read_mostly;
+
 /* Register addresses and values for different BIOS versions */
-static const struct bios_settings bios_tbl[] = {
+static const struct bios_settings bios_tbl[] __initconst = {
 	/* AOA110 */
 	{"Acer", "AOA110", "v0.3109", 0x55, 0x58, {0x1f, 0x00}, 0},
 	{"Acer", "AOA110", "v0.3114", 0x55, 0x58, {0x1f, 0x00}, 0},
@@ -260,8 +270,6 @@ static const struct bios_settings bios_tbl[] = {
 	{"", "", "", 0, 0, {0, 0}, 0}
 };
 
-static const struct bios_settings *bios_cfg __read_mostly;
-
 /*
  * this struct is used to instruct thermal layer to use bang_bang instead of
  * default governor for acerhdf
@@ -274,7 +282,7 @@ static int acerhdf_get_temp(int *temp)
 {
 	u8 read_temp;
 
-	if (ec_read(bios_cfg->tempreg, &read_temp))
+	if (ec_read(ctrl_cfg.tempreg, &read_temp))
 		return -EINVAL;
 
 	*temp = read_temp * 1000;
@@ -286,10 +294,10 @@ static int acerhdf_get_fanstate(int *state)
 {
 	u8 fan;
 
-	if (ec_read(bios_cfg->fanreg, &fan))
+	if (ec_read(ctrl_cfg.fanreg, &fan))
 		return -EINVAL;
 
-	if (fan != bios_cfg->cmd.cmd_off)
+	if (fan != ctrl_cfg.cmd.cmd_off)
 		*state = ACERHDF_FAN_AUTO;
 	else
 		*state = ACERHDF_FAN_OFF;
@@ -310,13 +318,13 @@ static void acerhdf_change_fanstate(int state)
 		state = ACERHDF_FAN_AUTO;
 	}
 
-	cmd = (state == ACERHDF_FAN_OFF) ? bios_cfg->cmd.cmd_off
-					 : bios_cfg->cmd.cmd_auto;
+	cmd = (state == ACERHDF_FAN_OFF) ? ctrl_cfg.cmd.cmd_off
+					 : ctrl_cfg.cmd.cmd_auto;
 	fanstate = state;
 
-	ec_write(bios_cfg->fanreg, cmd);
+	ec_write(ctrl_cfg.fanreg, cmd);
 
-	if (bios_cfg->mcmd_enable && state == ACERHDF_FAN_OFF) {
+	if (ctrl_cfg.mcmd_enable && state == ACERHDF_FAN_OFF) {
 		if (verbose)
 			pr_notice("turning off fan manually\n");
 		ec_write(mcmd.mreg, mcmd.moff);
@@ -623,6 +631,7 @@ static int __init acerhdf_check_hardware(void)
 {
 	char const *vendor, *version, *product;
 	const struct bios_settings *bt = NULL;
+	int found = 0;
 
 	/* get BIOS data */
 	vendor  = dmi_get_system_info(DMI_SYS_VENDOR);
@@ -672,17 +681,23 @@ static int __init acerhdf_check_hardware(void)
 		if (str_starts_with(vendor, bt->vendor) &&
 				str_starts_with(product, bt->product) &&
 				str_starts_with(version, bt->version)) {
-			bios_cfg = bt;
+			found = 1;
 			break;
 		}
 	}
 
-	if (!bios_cfg) {
+	if (!found) {
 		pr_err("unknown (unsupported) BIOS version %s/%s/%s, please report, aborting!\n",
 		       vendor, product, version);
 		return -EINVAL;
 	}
 
+	/* Copy control settings from BIOS table before we free it. */
+	ctrl_cfg.fanreg = bt->fanreg;
+	ctrl_cfg.tempreg = bt->tempreg;
+	memcpy(&ctrl_cfg.cmd, &bt->cmd, sizeof(struct fancmd));
+	ctrl_cfg.mcmd_enable = bt->mcmd_enable;
+
 	/*
 	 * if started with kernel mode off, prevent the kernel from switching
 	 * off the fan