phy: samsung: exynosautov9-ufs: correct TSRV register configurations

For exynos auto v9's UFS MPHY, We should use 0x50 offset of TSRV register
configurations. So, it must be

s/PHY_TRSV_REG_CFG/PHY_TRSV_REG_CFG_AUTOV9/g

Fixes: d6451924 ("phy: samsung-ufs: support exynosauto ufs phy driver")
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220603050536.61957-1-chanho61.park@samsung.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

drivers/phy/samsung/phy-exynosautov9-ufs.c

@@ -31,22 +31,22 @@ static const struct samsung_ufs_phy_cfg exynosautov9_pre_init_cfg[] = {
 	PHY_COMN_REG_CFG(0x023, 0xc0, PWR_MODE_ANY),
 	PHY_COMN_REG_CFG(0x023, 0x00, PWR_MODE_ANY),
 
-	PHY_TRSV_REG_CFG(0x042, 0x5d, PWR_MODE_ANY),
-	PHY_TRSV_REG_CFG(0x043, 0x80, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_AUTOV9(0x042, 0x5d, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_AUTOV9(0x043, 0x80, PWR_MODE_ANY),
 
 	END_UFS_PHY_CFG,
 };
 
 /* Calibration for HS mode series A/B */
 static const struct samsung_ufs_phy_cfg exynosautov9_pre_pwr_hs_cfg[] = {
-	PHY_TRSV_REG_CFG(0x032, 0xbc, PWR_MODE_HS_ANY),
-	PHY_TRSV_REG_CFG(0x03c, 0x7f, PWR_MODE_HS_ANY),
-	PHY_TRSV_REG_CFG(0x048, 0xc0, PWR_MODE_HS_ANY),
+	PHY_TRSV_REG_CFG_AUTOV9(0x032, 0xbc, PWR_MODE_HS_ANY),
+	PHY_TRSV_REG_CFG_AUTOV9(0x03c, 0x7f, PWR_MODE_HS_ANY),
+	PHY_TRSV_REG_CFG_AUTOV9(0x048, 0xc0, PWR_MODE_HS_ANY),
 
-	PHY_TRSV_REG_CFG(0x04a, 0x00, PWR_MODE_HS_G3_SER_B),
-	PHY_TRSV_REG_CFG(0x04b, 0x10, PWR_MODE_HS_G1_SER_B |
+	PHY_TRSV_REG_CFG_AUTOV9(0x04a, 0x00, PWR_MODE_HS_G3_SER_B),
+	PHY_TRSV_REG_CFG_AUTOV9(0x04b, 0x10, PWR_MODE_HS_G1_SER_B |
 				PWR_MODE_HS_G3_SER_B),
-	PHY_TRSV_REG_CFG(0x04d, 0x63, PWR_MODE_HS_G3_SER_B),
+	PHY_TRSV_REG_CFG_AUTOV9(0x04d, 0x63, PWR_MODE_HS_G3_SER_B),
 
 	END_UFS_PHY_CFG,
 };