Commit f8a09605 authored by Tomas Winkler's avatar Tomas Winkler Committed by Greg Kroah-Hartman

mei: simplify error handling via devres function.

Use devm_ and pcim_ functions to make error handling
simpler and code smaller and tidier.

Based on original patch by
mei: me: use managed functions pcim_* and devm_*
https://lkml.org/lkml/2016/2/1/339Signed-off-by: default avatarTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: default avatarAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent f046192d
......@@ -1389,7 +1389,7 @@ const struct mei_cfg mei_me_pch8_sps_cfg = {
* @pdev: The pci device structure
* @cfg: per device generation config
*
* Return: The mei_device_device pointer on success, NULL on failure.
* Return: The mei_device pointer on success, NULL on failure.
*/
struct mei_device *mei_me_dev_init(struct pci_dev *pdev,
const struct mei_cfg *cfg)
......@@ -1397,7 +1397,7 @@ struct mei_device *mei_me_dev_init(struct pci_dev *pdev,
struct mei_device *dev;
struct mei_me_hw *hw;
dev = kzalloc(sizeof(struct mei_device) +
dev = devm_kzalloc(&pdev->dev, sizeof(struct mei_device) +
sizeof(struct mei_me_hw), GFP_KERNEL);
if (!dev)
return NULL;
......
......@@ -1207,7 +1207,7 @@ struct mei_device *mei_txe_dev_init(struct pci_dev *pdev)
struct mei_device *dev;
struct mei_txe_hw *hw;
dev = kzalloc(sizeof(struct mei_device) +
dev = devm_kzalloc(&pdev->dev, sizeof(struct mei_device) +
sizeof(struct mei_txe_hw), GFP_KERNEL);
if (!dev)
return NULL;
......
......@@ -45,7 +45,7 @@
* @intr_cause: translated interrupt cause
*/
struct mei_txe_hw {
void __iomem *mem_addr[NUM_OF_MEM_BARS];
void __iomem * const *mem_addr;
u32 aliveness;
u32 readiness;
u32 slots;
......
......@@ -149,18 +149,18 @@ static int mei_me_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
return -ENODEV;
/* enable pci dev */
err = pci_enable_device(pdev);
err = pcim_enable_device(pdev);
if (err) {
dev_err(&pdev->dev, "failed to enable pci device.\n");
goto end;
}
/* set PCI host mastering */
pci_set_master(pdev);
/* pci request regions for mei driver */
err = pci_request_regions(pdev, KBUILD_MODNAME);
/* pci request regions and mapping IO device memory for mei driver */
err = pcim_iomap_regions(pdev, BIT(0), KBUILD_MODNAME);
if (err) {
dev_err(&pdev->dev, "failed to get pci regions.\n");
goto disable_device;
goto end;
}
if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) ||
......@@ -173,24 +173,18 @@ static int mei_me_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
}
if (err) {
dev_err(&pdev->dev, "No usable DMA configuration, aborting\n");
goto release_regions;
goto end;
}
/* allocates and initializes the mei dev structure */
dev = mei_me_dev_init(pdev, cfg);
if (!dev) {
err = -ENOMEM;
goto release_regions;
goto end;
}
hw = to_me_hw(dev);
/* mapping IO device memory */
hw->mem_addr = pci_iomap(pdev, 0, 0);
if (!hw->mem_addr) {
dev_err(&pdev->dev, "mapping I/O device memory failure.\n");
err = -ENOMEM;
goto free_device;
}
hw->mem_addr = pcim_iomap_table(pdev)[0];
pci_enable_msi(pdev);
/* request and enable interrupt */
......@@ -203,7 +197,7 @@ static int mei_me_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (err) {
dev_err(&pdev->dev, "request_threaded_irq failure. irq = %d\n",
pdev->irq);
goto disable_msi;
goto end;
}
if (mei_start(dev)) {
......@@ -242,15 +236,6 @@ static int mei_me_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
mei_cancel_work(dev);
mei_disable_interrupts(dev);
free_irq(pdev->irq, dev);
disable_msi:
pci_disable_msi(pdev);
pci_iounmap(pdev, hw->mem_addr);
free_device:
kfree(dev);
release_regions:
pci_release_regions(pdev);
disable_device:
pci_disable_device(pdev);
end:
dev_err(&pdev->dev, "initialization failed.\n");
return err;
......@@ -267,7 +252,6 @@ static int mei_me_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
static void mei_me_remove(struct pci_dev *pdev)
{
struct mei_device *dev;
struct mei_me_hw *hw;
dev = pci_get_drvdata(pdev);
if (!dev)
......@@ -276,33 +260,19 @@ static void mei_me_remove(struct pci_dev *pdev)
if (mei_pg_is_enabled(dev))
pm_runtime_get_noresume(&pdev->dev);
hw = to_me_hw(dev);
dev_dbg(&pdev->dev, "stop\n");
mei_stop(dev);
if (!pci_dev_run_wake(pdev))
mei_me_unset_pm_domain(dev);
/* disable interrupts */
mei_disable_interrupts(dev);
free_irq(pdev->irq, dev);
pci_disable_msi(pdev);
if (hw->mem_addr)
pci_iounmap(pdev, hw->mem_addr);
mei_deregister(dev);
kfree(dev);
pci_release_regions(pdev);
pci_disable_device(pdev);
}
#ifdef CONFIG_PM_SLEEP
static int mei_me_pci_suspend(struct device *device)
{
......
......@@ -52,17 +52,6 @@ static inline void mei_txe_set_pm_domain(struct mei_device *dev) {}
static inline void mei_txe_unset_pm_domain(struct mei_device *dev) {}
#endif /* CONFIG_PM */
static void mei_txe_pci_iounmap(struct pci_dev *pdev, struct mei_txe_hw *hw)
{
int i;
for (i = SEC_BAR; i < NUM_OF_MEM_BARS; i++) {
if (hw->mem_addr[i]) {
pci_iounmap(pdev, hw->mem_addr[i]);
hw->mem_addr[i] = NULL;
}
}
}
/**
* mei_txe_probe - Device Initialization Routine
*
......@@ -75,22 +64,22 @@ static int mei_txe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct mei_device *dev;
struct mei_txe_hw *hw;
const int mask = BIT(SEC_BAR) | BIT(BRIDGE_BAR);
int err;
int i;
/* enable pci dev */
err = pci_enable_device(pdev);
err = pcim_enable_device(pdev);
if (err) {
dev_err(&pdev->dev, "failed to enable pci device.\n");
goto end;
}
/* set PCI host mastering */
pci_set_master(pdev);
/* pci request regions for mei driver */
err = pci_request_regions(pdev, KBUILD_MODNAME);
/* pci request regions and mapping IO device memory for mei driver */
err = pcim_iomap_regions(pdev, mask, KBUILD_MODNAME);
if (err) {
dev_err(&pdev->dev, "failed to get pci regions.\n");
goto disable_device;
goto end;
}
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36));
......@@ -98,7 +87,7 @@ static int mei_txe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
dev_err(&pdev->dev, "No suitable DMA available.\n");
goto release_regions;
goto end;
}
}
......@@ -106,20 +95,10 @@ static int mei_txe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
dev = mei_txe_dev_init(pdev);
if (!dev) {
err = -ENOMEM;
goto release_regions;
goto end;
}
hw = to_txe_hw(dev);
/* mapping IO device memory */
for (i = SEC_BAR; i < NUM_OF_MEM_BARS; i++) {
hw->mem_addr[i] = pci_iomap(pdev, i, 0);
if (!hw->mem_addr[i]) {
dev_err(&pdev->dev, "mapping I/O device memory failure.\n");
err = -ENOMEM;
goto free_device;
}
}
hw->mem_addr = pcim_iomap_table(pdev);
pci_enable_msi(pdev);
......@@ -140,7 +119,7 @@ static int mei_txe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (err) {
dev_err(&pdev->dev, "mei: request_threaded_irq failure. irq = %d\n",
pdev->irq);
goto free_device;
goto end;
}
if (mei_start(dev)) {
......@@ -173,23 +152,9 @@ static int mei_txe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
stop:
mei_stop(dev);
release_irq:
mei_cancel_work(dev);
/* disable interrupts */
mei_disable_interrupts(dev);
free_irq(pdev->irq, dev);
pci_disable_msi(pdev);
free_device:
mei_txe_pci_iounmap(pdev, hw);
kfree(dev);
release_regions:
pci_release_regions(pdev);
disable_device:
pci_disable_device(pdev);
end:
dev_err(&pdev->dev, "initialization failed.\n");
return err;
......@@ -206,38 +171,24 @@ static int mei_txe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
static void mei_txe_remove(struct pci_dev *pdev)
{
struct mei_device *dev;
struct mei_txe_hw *hw;
dev = pci_get_drvdata(pdev);
if (!dev) {
dev_err(&pdev->dev, "mei: dev =NULL\n");
dev_err(&pdev->dev, "mei: dev == NULL\n");
return;
}
pm_runtime_get_noresume(&pdev->dev);
hw = to_txe_hw(dev);
mei_stop(dev);
if (!pci_dev_run_wake(pdev))
mei_txe_unset_pm_domain(dev);
/* disable interrupts */
mei_disable_interrupts(dev);
free_irq(pdev->irq, dev);
pci_disable_msi(pdev);
pci_set_drvdata(pdev, NULL);
mei_txe_pci_iounmap(pdev, hw);
mei_deregister(dev);
kfree(dev);
pci_release_regions(pdev);
pci_disable_device(pdev);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment